linux_dsm_epyc7002/drivers/net/wireless/ath/ath10k
Manikanta Pubbisetty db0984e51a ath10k: select board data based on BMI chip id and board id
QCA99X0 uses radio specific board names based on chip id and
board id combinations. We get these IDs from the target using BMI after otp.bin
has been started.

This patch reorders the call to the function ath10k_core_fetch_board_file
so that we have OTP binary before requesting for boardid-chipid. We get this
OTP data after parsing firmware-N.bin.

[kvalo@qca.qualcomm.com: try BMI_PARAM_GET_EEPROM_BOARD_ID with
 all boards and detect if command is not supported]
Signed-off-by: Manikanta Pubbisetty <c_mpubbi@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-10-14 08:58:35 +03:00
..
bmi.c ath10k: improve logging to include dev id 2014-08-26 19:04:48 +03:00
bmi.h ath10k: select board data based on BMI chip id and board id 2015-10-14 08:58:35 +03:00
ce.c ath10k: optimize ce_lock on post rx buffer processing 2015-10-09 11:35:47 +03:00
ce.h ath10k: Extend CE src desc flags for interrupt indication 2015-06-30 15:12:44 +03:00
core.c ath10k: select board data based on BMI chip id and board id 2015-10-14 08:58:35 +03:00
core.h ath10k: select board data based on BMI chip id and board id 2015-10-14 08:58:35 +03:00
debug.c ath10k: select board data based on BMI chip id and board id 2015-10-14 08:58:35 +03:00
debug.h ath10k: implement debugfs interface for Transmit Power Control stats 2015-10-06 14:42:59 +03:00
debugfs_sta.c ath10k: add support to send delba 2015-01-13 16:13:47 +02:00
hif.h ath10k: remove transfer_id from ath10k_hif_cb::tx_completion 2014-12-01 09:13:36 +02:00
htc.c ath10k: fix dma_mapping_error() handling 2015-08-26 11:04:44 +03:00
htc.h ath10k: fix use of multiple blank lines 2014-09-18 10:45:20 +03:00
htt_rx.c ath10k: print invalid mcs reported in rx descriptor 2015-09-09 12:45:00 +03:00
htt_tx.c ath10k: use pre-allocated DMA buffer in Tx 2015-10-06 15:04:12 +03:00
htt.c ath10k: enable raw encap mode and software crypto engine 2015-07-29 11:28:24 +03:00
htt.h ath10k: use pre-allocated DMA buffer in Tx 2015-10-06 15:04:12 +03:00
hw.c ath10k: add cycle/rx_clear counters frequency to hw_params 2015-08-17 16:46:21 +03:00
hw.h ath10k: add board 2 API support 2015-10-14 08:58:28 +03:00
Kconfig ath10k: ATH10K_DEBUGFS depends on DEBUG_FS 2014-09-10 14:17:45 +03:00
mac.c ath10k: use station's current operating mode from assoc request 2015-10-09 11:37:09 +03:00
mac.h ath10k: fix per-vif queue locking 2015-07-11 19:06:26 +03:00
Makefile ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
p2p.c ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
p2p.h ath10k: implement handling of p2p noa event 2015-03-07 09:57:42 +02:00
pci.c ath10k: add board 2 API support 2015-10-14 08:58:28 +03:00
pci.h ath10k: increase pci wakeup timeout to 30 ms 2015-10-09 11:33:50 +03:00
rx_desc.h ath10k: add support for qca99x0 Rx descriptors 2015-07-24 10:44:55 +03:00
spectral.c ath10k: add spectral scan support for 10.4 fw 2015-08-26 11:09:12 +03:00
spectral.h ath10k: refactor phyerr event handlers 2015-08-17 17:43:29 +03:00
swap.c ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
swap.h ath10k: Add support for code swap 2015-06-30 15:12:47 +03:00
targaddrs.h ath10k: Add hw register/values for QCA99X0 chip 2015-06-30 15:12:37 +03:00
testmode_i.h ath10k: add testmode 2014-09-11 23:42:36 +03:00
testmode.c ath10k: introduce wmi ops 2014-12-08 17:39:08 +02:00
testmode.h ath10k: add testmode 2014-09-11 23:42:36 +03:00
thermal.c ath10k: don't call quiet mode if it's not implemented 2015-04-01 20:21:17 +03:00
thermal.h ath10k: configure thermal throttle while powering up 2015-03-23 17:16:37 +02:00
trace.c
trace.h ath10k: add extra check for frame tracing 2015-04-17 09:33:48 +03:00
txrx.c ath10k: use pre-allocated DMA buffer in Tx 2015-10-06 15:04:12 +03:00
txrx.h ath10k: fix Rx aggregation reordering 2014-07-25 11:15:39 +03:00
wmi-ops.h ath10k: implement debugfs interface for Transmit Power Control stats 2015-10-06 14:42:59 +03:00
wmi-tlv.c ath10k: refactor phyerr event handlers 2015-08-17 17:43:29 +03:00
wmi-tlv.h ath10k: implement tx pause wmi event 2015-04-01 20:31:08 +03:00
wmi.c ath10k: use Rx decap mode configured when driver registered 2015-10-06 14:44:19 +03:00
wmi.h ath10k: implement debugfs interface for Transmit Power Control stats 2015-10-06 14:42:59 +03:00
wow.c ath10k: fix hw reconfig on wow failure 2015-08-13 14:22:49 +03:00
wow.h ath10k: add WOW patterns support 2015-03-30 09:10:24 +03:00