mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 19:15:25 +07:00
d1876a0bcf
Currently common clock and reset IDs were used, however, each clock and
reset ID should be used for each channel.
Pro5 and PXs2 are affected by this fix, but the SCSSI clock gate of Pro5 is
common to all channels.
Fixes: 92fa4f4cc2 ("ARM: dts: uniphier: add SPI node for UniPhier 32bit SoCs")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
657 lines
16 KiB
Plaintext
657 lines
16 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0+ OR MIT
|
|
//
|
|
// Device Tree Source for UniPhier Pro5 SoC
|
|
//
|
|
// Copyright (C) 2015-2016 Socionext Inc.
|
|
// Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
|
|
/ {
|
|
compatible = "socionext,uniphier-pro5";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <0>;
|
|
clocks = <&sys_clk 32>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
operating-points-v2 = <&cpu_opp>;
|
|
};
|
|
|
|
cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a9";
|
|
reg = <1>;
|
|
clocks = <&sys_clk 32>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&l2>;
|
|
operating-points-v2 = <&cpu_opp>;
|
|
};
|
|
};
|
|
|
|
cpu_opp: opp-table {
|
|
compatible = "operating-points-v2";
|
|
opp-shared;
|
|
|
|
opp-100000000 {
|
|
opp-hz = /bits/ 64 <100000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-116667000 {
|
|
opp-hz = /bits/ 64 <116667000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-150000000 {
|
|
opp-hz = /bits/ 64 <150000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-175000000 {
|
|
opp-hz = /bits/ 64 <175000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-200000000 {
|
|
opp-hz = /bits/ 64 <200000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-233334000 {
|
|
opp-hz = /bits/ 64 <233334000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-300000000 {
|
|
opp-hz = /bits/ 64 <300000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-350000000 {
|
|
opp-hz = /bits/ 64 <350000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-400000000 {
|
|
opp-hz = /bits/ 64 <400000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-466667000 {
|
|
opp-hz = /bits/ 64 <466667000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-600000000 {
|
|
opp-hz = /bits/ 64 <600000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-700000000 {
|
|
opp-hz = /bits/ 64 <700000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-800000000 {
|
|
opp-hz = /bits/ 64 <800000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-933334000 {
|
|
opp-hz = /bits/ 64 <933334000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-1200000000 {
|
|
opp-hz = /bits/ 64 <1200000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
opp-1400000000 {
|
|
opp-hz = /bits/ 64 <1400000000>;
|
|
clock-latency-ns = <300>;
|
|
};
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-0.2";
|
|
method = "smc";
|
|
};
|
|
|
|
clocks {
|
|
refclk: ref {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <20000000>;
|
|
};
|
|
|
|
arm_timer_clk: arm-timer {
|
|
#clock-cells = <0>;
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <50000000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
interrupt-parent = <&intc>;
|
|
|
|
l2: cache-controller@500c0000 {
|
|
compatible = "socionext,uniphier-system-cache";
|
|
reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
|
|
<0x506c0000 0x400>;
|
|
interrupts = <0 190 4>, <0 191 4>;
|
|
cache-unified;
|
|
cache-size = <(2 * 1024 * 1024)>;
|
|
cache-sets = <512>;
|
|
cache-line-size = <128>;
|
|
cache-level = <2>;
|
|
next-level-cache = <&l3>;
|
|
};
|
|
|
|
l3: cache-controller@500c8000 {
|
|
compatible = "socionext,uniphier-system-cache";
|
|
reg = <0x500c8000 0x2000>, <0x503c8100 0x8>,
|
|
<0x506c8000 0x400>;
|
|
interrupts = <0 174 4>, <0 175 4>;
|
|
cache-unified;
|
|
cache-size = <(2 * 1024 * 1024)>;
|
|
cache-sets = <512>;
|
|
cache-line-size = <256>;
|
|
cache-level = <3>;
|
|
};
|
|
|
|
spi0: spi@54006000 {
|
|
compatible = "socionext,uniphier-scssi";
|
|
status = "disabled";
|
|
reg = <0x54006000 0x100>;
|
|
interrupts = <0 39 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi0>;
|
|
clocks = <&peri_clk 11>;
|
|
resets = <&peri_rst 11>;
|
|
};
|
|
|
|
spi1: spi@54006100 {
|
|
compatible = "socionext,uniphier-scssi";
|
|
status = "disabled";
|
|
reg = <0x54006100 0x100>;
|
|
interrupts = <0 216 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi1>;
|
|
clocks = <&peri_clk 11>; /* common with spi0 */
|
|
resets = <&peri_rst 12>;
|
|
};
|
|
|
|
serial0: serial@54006800 {
|
|
compatible = "socionext,uniphier-uart";
|
|
status = "disabled";
|
|
reg = <0x54006800 0x40>;
|
|
interrupts = <0 33 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0>;
|
|
clocks = <&peri_clk 0>;
|
|
resets = <&peri_rst 0>;
|
|
};
|
|
|
|
serial1: serial@54006900 {
|
|
compatible = "socionext,uniphier-uart";
|
|
status = "disabled";
|
|
reg = <0x54006900 0x40>;
|
|
interrupts = <0 35 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1>;
|
|
clocks = <&peri_clk 1>;
|
|
resets = <&peri_rst 1>;
|
|
};
|
|
|
|
serial2: serial@54006a00 {
|
|
compatible = "socionext,uniphier-uart";
|
|
status = "disabled";
|
|
reg = <0x54006a00 0x40>;
|
|
interrupts = <0 37 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart2>;
|
|
clocks = <&peri_clk 2>;
|
|
resets = <&peri_rst 2>;
|
|
};
|
|
|
|
serial3: serial@54006b00 {
|
|
compatible = "socionext,uniphier-uart";
|
|
status = "disabled";
|
|
reg = <0x54006b00 0x40>;
|
|
interrupts = <0 177 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart3>;
|
|
clocks = <&peri_clk 3>;
|
|
resets = <&peri_rst 3>;
|
|
};
|
|
|
|
gpio: gpio@55000000 {
|
|
compatible = "socionext,uniphier-gpio";
|
|
reg = <0x55000000 0x200>;
|
|
interrupt-parent = <&aidet>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio-ranges = <&pinctrl 0 0 0>;
|
|
gpio-ranges-group-names = "gpio_range";
|
|
ngpios = <248>;
|
|
socionext,interrupt-ranges = <0 48 16>, <16 154 5>;
|
|
};
|
|
|
|
i2c0: i2c@58780000 {
|
|
compatible = "socionext,uniphier-fi2c";
|
|
status = "disabled";
|
|
reg = <0x58780000 0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <0 41 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c0>;
|
|
clocks = <&peri_clk 4>;
|
|
resets = <&peri_rst 4>;
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
i2c1: i2c@58781000 {
|
|
compatible = "socionext,uniphier-fi2c";
|
|
status = "disabled";
|
|
reg = <0x58781000 0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <0 42 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c1>;
|
|
clocks = <&peri_clk 5>;
|
|
resets = <&peri_rst 5>;
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
i2c2: i2c@58782000 {
|
|
compatible = "socionext,uniphier-fi2c";
|
|
status = "disabled";
|
|
reg = <0x58782000 0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <0 43 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c2>;
|
|
clocks = <&peri_clk 6>;
|
|
resets = <&peri_rst 6>;
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
i2c3: i2c@58783000 {
|
|
compatible = "socionext,uniphier-fi2c";
|
|
status = "disabled";
|
|
reg = <0x58783000 0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <0 44 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_i2c3>;
|
|
clocks = <&peri_clk 7>;
|
|
resets = <&peri_rst 7>;
|
|
clock-frequency = <100000>;
|
|
};
|
|
|
|
/* i2c4 does not exist */
|
|
|
|
/* chip-internal connection for DMD */
|
|
i2c5: i2c@58785000 {
|
|
compatible = "socionext,uniphier-fi2c";
|
|
reg = <0x58785000 0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <0 25 4>;
|
|
clocks = <&peri_clk 9>;
|
|
resets = <&peri_rst 9>;
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
/* chip-internal connection for HDMI */
|
|
i2c6: i2c@58786000 {
|
|
compatible = "socionext,uniphier-fi2c";
|
|
reg = <0x58786000 0x80>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <0 26 4>;
|
|
clocks = <&peri_clk 10>;
|
|
resets = <&peri_rst 10>;
|
|
clock-frequency = <400000>;
|
|
};
|
|
|
|
system_bus: system-bus@58c00000 {
|
|
compatible = "socionext,uniphier-system-bus";
|
|
status = "disabled";
|
|
reg = <0x58c00000 0x400>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_system_bus>;
|
|
};
|
|
|
|
smpctrl@59801000 {
|
|
compatible = "socionext,uniphier-smpctrl";
|
|
reg = <0x59801000 0x400>;
|
|
};
|
|
|
|
sdctrl@59810000 {
|
|
compatible = "socionext,uniphier-pro5-sdctrl",
|
|
"simple-mfd", "syscon";
|
|
reg = <0x59810000 0x400>;
|
|
|
|
sd_clk: clock {
|
|
compatible = "socionext,uniphier-pro5-sd-clock";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
sd_rst: reset {
|
|
compatible = "socionext,uniphier-pro5-sd-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
perictrl@59820000 {
|
|
compatible = "socionext,uniphier-pro5-perictrl",
|
|
"simple-mfd", "syscon";
|
|
reg = <0x59820000 0x200>;
|
|
|
|
peri_clk: clock {
|
|
compatible = "socionext,uniphier-pro5-peri-clock";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
peri_rst: reset {
|
|
compatible = "socionext,uniphier-pro5-peri-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
soc-glue@5f800000 {
|
|
compatible = "socionext,uniphier-pro5-soc-glue",
|
|
"simple-mfd", "syscon";
|
|
reg = <0x5f800000 0x2000>;
|
|
|
|
pinctrl: pinctrl {
|
|
compatible = "socionext,uniphier-pro5-pinctrl";
|
|
};
|
|
};
|
|
|
|
soc-glue@5f900000 {
|
|
compatible = "socionext,uniphier-pro5-soc-glue-debug",
|
|
"simple-mfd";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x5f900000 0x2000>;
|
|
|
|
efuse@100 {
|
|
compatible = "socionext,uniphier-efuse";
|
|
reg = <0x100 0x28>;
|
|
};
|
|
|
|
efuse@130 {
|
|
compatible = "socionext,uniphier-efuse";
|
|
reg = <0x130 0x8>;
|
|
};
|
|
|
|
efuse@200 {
|
|
compatible = "socionext,uniphier-efuse";
|
|
reg = <0x200 0x28>;
|
|
};
|
|
|
|
efuse@300 {
|
|
compatible = "socionext,uniphier-efuse";
|
|
reg = <0x300 0x14>;
|
|
};
|
|
|
|
efuse@400 {
|
|
compatible = "socionext,uniphier-efuse";
|
|
reg = <0x400 0x8>;
|
|
};
|
|
};
|
|
|
|
aidet: interrupt-controller@5fc20000 {
|
|
compatible = "socionext,uniphier-pro5-aidet";
|
|
reg = <0x5fc20000 0x200>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
timer@60000200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0x60000200 0x20>;
|
|
interrupts = <1 11 0x304>;
|
|
clocks = <&arm_timer_clk>;
|
|
};
|
|
|
|
timer@60000600 {
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0x60000600 0x20>;
|
|
interrupts = <1 13 0x304>;
|
|
clocks = <&arm_timer_clk>;
|
|
};
|
|
|
|
intc: interrupt-controller@60001000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
reg = <0x60001000 0x1000>,
|
|
<0x60000100 0x100>;
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
};
|
|
|
|
sysctrl@61840000 {
|
|
compatible = "socionext,uniphier-pro5-sysctrl",
|
|
"simple-mfd", "syscon";
|
|
reg = <0x61840000 0x10000>;
|
|
|
|
sys_clk: clock {
|
|
compatible = "socionext,uniphier-pro5-clock";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
sys_rst: reset {
|
|
compatible = "socionext,uniphier-pro5-reset";
|
|
#reset-cells = <1>;
|
|
};
|
|
};
|
|
|
|
usb0: usb@65a00000 {
|
|
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
|
|
status = "disabled";
|
|
reg = <0x65a00000 0xcd00>;
|
|
interrupt-names = "host";
|
|
interrupts = <0 134 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb0>;
|
|
clock-names = "ref", "bus_early", "suspend";
|
|
clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
|
|
resets = <&usb0_rst 15>;
|
|
phys = <&usb0_hsphy0>, <&usb0_ssphy0>;
|
|
dr_mode = "host";
|
|
};
|
|
|
|
usb-glue@65b00000 {
|
|
compatible = "socionext,uniphier-pro5-dwc3-glue",
|
|
"simple-mfd";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x65b00000 0x400>;
|
|
|
|
usb0_rst: reset@0 {
|
|
compatible = "socionext,uniphier-pro5-usb3-reset";
|
|
reg = <0x0 0x4>;
|
|
#reset-cells = <1>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 14>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 14>;
|
|
};
|
|
|
|
usb0_vbus0: regulator@100 {
|
|
compatible = "socionext,uniphier-pro5-usb3-regulator";
|
|
reg = <0x100 0x10>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 14>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 14>;
|
|
};
|
|
|
|
usb0_hsphy0: hs-phy@280 {
|
|
compatible = "socionext,uniphier-pro5-usb3-hsphy";
|
|
reg = <0x280 0x10>;
|
|
#phy-cells = <0>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 14>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 14>;
|
|
vbus-supply = <&usb0_vbus0>;
|
|
};
|
|
|
|
usb0_ssphy0: ss-phy@380 {
|
|
compatible = "socionext,uniphier-pro5-usb3-ssphy";
|
|
reg = <0x380 0x10>;
|
|
#phy-cells = <0>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 14>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 14>;
|
|
vbus-supply = <&usb0_vbus0>;
|
|
};
|
|
};
|
|
|
|
usb1: usb@65c00000 {
|
|
compatible = "socionext,uniphier-dwc3", "snps,dwc3";
|
|
status = "disabled";
|
|
reg = <0x65c00000 0xcd00>;
|
|
interrupt-names = "host";
|
|
interrupts = <0 137 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb2>;
|
|
clock-names = "ref", "bus_early", "suspend";
|
|
clocks = <&sys_clk 12>, <&sys_clk 12>, <&sys_clk 12>;
|
|
resets = <&usb1_rst 15>;
|
|
phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
|
|
dr_mode = "host";
|
|
};
|
|
|
|
usb-glue@65d00000 {
|
|
compatible = "socionext,uniphier-pro5-dwc3-glue",
|
|
"simple-mfd";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x65d00000 0x400>;
|
|
|
|
usb1_rst: reset@0 {
|
|
compatible = "socionext,uniphier-pro5-usb3-reset";
|
|
reg = <0x0 0x4>;
|
|
#reset-cells = <1>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 15>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 15>;
|
|
};
|
|
|
|
usb1_vbus0: regulator@100 {
|
|
compatible = "socionext,uniphier-pro5-usb3-regulator";
|
|
reg = <0x100 0x10>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 15>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 15>;
|
|
};
|
|
|
|
usb1_vbus1: regulator@110 {
|
|
compatible = "socionext,uniphier-pro5-usb3-regulator";
|
|
reg = <0x110 0x10>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 15>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 15>;
|
|
};
|
|
|
|
usb1_hsphy0: hs-phy@280 {
|
|
compatible = "socionext,uniphier-pro5-usb3-hsphy";
|
|
reg = <0x280 0x10>;
|
|
#phy-cells = <0>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 15>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 15>;
|
|
vbus-supply = <&usb1_vbus0>;
|
|
};
|
|
|
|
usb1_hsphy1: hs-phy@290 {
|
|
compatible = "socionext,uniphier-pro5-usb3-hsphy";
|
|
reg = <0x290 0x10>;
|
|
#phy-cells = <0>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 15>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 15>;
|
|
vbus-supply = <&usb1_vbus1>;
|
|
};
|
|
|
|
usb1_ssphy0: ss-phy@380 {
|
|
compatible = "socionext,uniphier-pro5-usb3-ssphy";
|
|
reg = <0x380 0x10>;
|
|
#phy-cells = <0>;
|
|
clock-names = "gio", "link";
|
|
clocks = <&sys_clk 12>, <&sys_clk 15>;
|
|
reset-names = "gio", "link";
|
|
resets = <&sys_rst 12>, <&sys_rst 15>;
|
|
vbus-supply = <&usb1_vbus0>;
|
|
};
|
|
};
|
|
|
|
nand: nand-controller@68000000 {
|
|
compatible = "socionext,uniphier-denali-nand-v5b";
|
|
status = "disabled";
|
|
reg-names = "nand_data", "denali_reg";
|
|
reg = <0x68000000 0x20>, <0x68100000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <0 65 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nand>;
|
|
clock-names = "nand", "nand_x", "ecc";
|
|
clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
|
|
reset-names = "nand", "reg";
|
|
resets = <&sys_rst 2>, <&sys_rst 2>;
|
|
};
|
|
|
|
emmc: mmc@68400000 {
|
|
compatible = "socionext,uniphier-sd-v3.1";
|
|
status = "disabled";
|
|
reg = <0x68400000 0x800>;
|
|
interrupts = <0 78 4>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_emmc>;
|
|
clocks = <&sd_clk 1>;
|
|
reset-names = "host", "hw";
|
|
resets = <&sd_rst 1>, <&sd_rst 6>;
|
|
bus-width = <8>;
|
|
cap-mmc-highspeed;
|
|
cap-mmc-hw-reset;
|
|
non-removable;
|
|
};
|
|
|
|
sd: mmc@68800000 {
|
|
compatible = "socionext,uniphier-sd-v3.1";
|
|
status = "disabled";
|
|
reg = <0x68800000 0x800>;
|
|
interrupts = <0 76 4>;
|
|
pinctrl-names = "default", "uhs";
|
|
pinctrl-0 = <&pinctrl_sd>;
|
|
pinctrl-1 = <&pinctrl_sd_uhs>;
|
|
clocks = <&sd_clk 0>;
|
|
reset-names = "host";
|
|
resets = <&sd_rst 0>;
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
sd-uhs-sdr12;
|
|
sd-uhs-sdr25;
|
|
sd-uhs-sdr50;
|
|
};
|
|
};
|
|
};
|
|
|
|
#include "uniphier-pinctrl.dtsi"
|