linux_dsm_epyc7002/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
Stefan Agner 78f10734f9 ARM: dts: imx6q-apalis: mux RESET_MOCI# signal
The pinctrl properties on the IOMUXC node get overwritten by the
carrier board level device tree, hence the pinctrl_reset_moci
pinctrl does not get applied.

Associate the pinctrl_reset_moci pinctrl with the PCIe node where
we also make use of the pin as a reset GPIO.

Since the pin is muxed as a GPIO by default not muxing it explicitly
worked fine in practise.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10 09:08:57 +08:00

298 lines
6.0 KiB
Plaintext

/*
* Copyright 2014-2017 Toradex AG
* Copyright 2012 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6q.dtsi"
#include "imx6qdl-apalis.dtsi"
/ {
model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
compatible = "toradex,apalis_imx6q-ixora-v1.1",
"toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
"fsl,imx6q";
aliases {
i2c0 = &i2c1;
i2c1 = &i2c3;
i2c2 = &i2c2;
rtc0 = &rtc_i2c;
rtc1 = &snvs_rtc;
};
chosen {
stdout-path = "serial0:115200n8";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
wakeup {
label = "Wake-Up";
gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
debounce-interval = <10>;
wakeup-source;
};
};
lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ipu1_lcdif>;
status = "okay";
port@0 {
reg = <0>;
lcd_display_in: endpoint {
remote-endpoint = <&ipu1_di1_disp1>;
};
};
port@1 {
reg = <1>;
lcd_display_out: endpoint {
remote-endpoint = <&lcd_panel_in>;
};
};
};
panel: panel {
/*
* edt,et057090dhu: EDT 5.7" LCD TFT
* edt,et070080dh6: EDT 7.0" LCD TFT
*/
compatible = "edt,et057090dhu";
backlight = <&backlight>;
port {
lcd_panel_in: endpoint {
remote-endpoint = <&lcd_display_out>;
};
};
};
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds_ixora>;
led4-green {
label = "LED_4_GREEN";
gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
};
led4-red {
label = "LED_4_RED";
gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
};
led5-green {
label = "LED_5_GREEN";
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
};
led5-red {
label = "LED_5_RED";
gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
};
};
};
&backlight {
brightness-levels = <0 127 191 223 239 247 251 255>;
default-brightness-level = <1>;
status = "okay";
};
&can1 {
status = "okay";
};
&can2 {
status = "okay";
};
&hdmi {
status = "okay";
};
/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
&i2c1 {
status = "okay";
/* M41T0M6 real time clock on carrier board */
rtc_i2c: rtc@68 {
compatible = "st,m41t0";
reg = <0x68>;
};
};
/*
* I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
* board)
*/
&i2c3 {
status = "okay";
};
&ipu1_di1_disp1 {
remote-endpoint = <&lcd_display_in>;
};
&ldb {
status = "okay";
};
&pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reset_moci>;
/* active-high meaning opposite of regular PERST# active-low polarity */
reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
reset-gpio-active-high;
status = "okay";
};
&pwm1 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&pwm3 {
status = "okay";
};
&pwm4 {
status = "okay";
};
&reg_usb_otg_vbus {
status = "okay";
};
&reg_usb_host_vbus {
status = "okay";
};
&sata {
status = "okay";
};
&sound_spdif {
status = "okay";
};
&spdif {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&uart4 {
status = "okay";
};
&uart5 {
status = "okay";
};
&usbh1 {
vbus-supply = <&reg_usb_host_vbus>;
status = "okay";
};
&usbotg {
vbus-supply = <&reg_usb_otg_vbus>;
status = "okay";
};
/* MMC1 */
&usdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
bus-width = <4>;
status = "okay";
};
&iomuxc {
/*
* Mux the Apalis GPIOs
*/
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
&pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
&pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
&pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
>;
pinctrl_leds_ixora: ledsixoragrp {
fsl,pins = <
MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
>;
};
};