Johannes Berg df1404650c mac80211: remove support for IFF_PROMISC ... This support is essentially useless as typically networks are encrypted, frames will be filtered by hardware, and rate scaling will be done with the intended recipient in mind. For real monitoring of the network, the monitor mode support should be used instead. Removing it removes a lot of corner cases. Signed-off-by: Johannes Berg <johannes.berg@intel.com>		2015-04-24 11:14:13 +02:00
..
b43.h	b43: support bcma core reset on AC-PHY hardware	2015-01-29 10:54:43 +02:00
bus.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
bus.h	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
debugfs.c
debugfs.h	b43: return true / false instead of numbers in functions which return bool value	2014-02-24 15:21:54 -05:00
dma.c	wireless: Use bool function returns of true/false instead of 1/0	2015-04-07 20:10:23 +03:00
dma.h
Kconfig	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
leds.c
leds.h
lo.c
lo.h
main.c	mac80211: remove support for IFF_PROMISC	2015-04-24 11:14:13 +02:00
main.h	b43: Implement PHY PLL reset	2014-09-15 15:00:53 -04:00
Makefile	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
pcmcia.c
pcmcia.h
phy_a.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
phy_a.h	b43: remove leftover code from old devices support	2014-06-20 14:13:45 -04:00
phy_ac.c	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
phy_ac.h	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
phy_common.c	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
phy_common.h	b43: AC-PHY: prepare place for developing new PHY support	2015-01-29 10:54:43 +02:00
phy_g.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
phy_g.h
phy_ht.c	b43: Implement PHY PLL reset	2014-09-15 15:00:53 -04:00
phy_ht.h	b43: HT-PHY: Implement band switching	2014-09-15 15:00:50 -04:00
phy_lcn.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
phy_lcn.h
phy_lp.c	b43: flush some writes on Broadcom MIPS SoCs	2014-08-25 16:00:42 -04:00
phy_lp.h
phy_n.c	b43: Implement PHY PLL reset	2014-09-15 15:00:53 -04:00
phy_n.h	b43: N-PHY: support setting custom TX power	2014-08-25 16:00:43 -04:00
pio.c	b43: return true / false instead of numbers in functions which return bool value	2014-02-24 15:21:54 -05:00
pio.h
ppr.c	b43: implement PPR (Power Per Rate) management/API	2014-08-25 16:00:43 -04:00
ppr.h	b43: implement PPR (Power Per Rate) management/API	2014-08-25 16:00:43 -04:00
radio_2055.c
radio_2055.h
radio_2056.c	b43: N-PHY: add missing calib values for radio 0x2026 rev 11	2014-05-22 14:04:37 -04:00
radio_2056.h
radio_2057.c	b43: N-PHY: add tables for radio 0x2057 rev 14	2014-07-18 13:45:25 -04:00
radio_2057.h	b43; N-PHY: write most of the missing code for revs 7+	2014-07-15 15:51:39 -04:00
radio_2059.c	b43: HT-PHY: Update values for frequency calibration	2014-09-15 15:00:50 -04:00
radio_2059.h	b43: HT-PHY: Complete radio init (add missing entries)	2014-09-11 15:27:35 -04:00
rfkill.c
rfkill.h
sdio.c
sdio.h
sysfs.c	net: Replace min macro with min_t	2014-03-03 15:35:54 -05:00
sysfs.h
tables_lpphy.c
tables_lpphy.h
tables_nphy.c	b43: N-PHY: add RF power tables for radio 0x2057 revs 9 & 14	2014-08-25 16:00:43 -04:00
tables_nphy.h	b43: N-PHY: add RF power tables for radio 0x2057 revs 9 & 14	2014-08-25 16:00:43 -04:00
tables_phy_ht.c
tables_phy_ht.h
tables_phy_lcn.c
tables_phy_lcn.h
tables.c
tables.h
wa.c	b43: G-PHY: fix random mistakes to match specs	2014-04-22 15:06:32 -04:00
wa.h
xmit.c	b43: report correct rate to mac80211 for 5 GHz packets	2014-07-23 13:08:35 -04:00
xmit.h	b43: update some transmit header constants	2014-09-15 15:00:54 -04:00