Al Cooper b0c0b66c0b phy: usb: Add support for wake and USB low power mode for 7211 S2/S5 ... Add support for 7211 USB wake. Disable all possible 7211 USB logic for S2/S5 if USB wake is not enabled. On the 7211, the XHCI wake signal was not connected properly and only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register. The workaround is to have VPU code running that polls for the proper bit in the DIAG register and to wake the system when the bit is asserted. Signed-off-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>		2020-01-08 12:58:06 +05:30
..
Kconfig	treewide: Add SPDX license identifier - Makefile/Kconfig	2019-05-21 10:50:46 +02:00
Makefile	phy: usb: Add support for new Synopsys USB controller on the 7216	2020-01-08 12:58:06 +05:30
phy-bcm-cygnus-pcie.c	phy: Convert to using %pOFn instead of device_node.name	2018-09-25 16:10:07 +05:30
phy-bcm-kona-usb2.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
phy-bcm-ns2-pcie.c	phy: Group vendor specific phy drivers	2017-06-01 15:28:33 +05:30
phy-bcm-ns2-usbdrd.c	extcon: Split out extcon header file for consumer and provider device	2017-10-23 14:07:58 +09:00
phy-bcm-ns-usb2.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
phy-bcm-ns-usb3.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500	2019-06-19 17:09:55 +02:00
phy-bcm-sr-pcie.c	phy: bcm-sr-pcie: Change operation when PIPEMUX=1	2019-02-07 11:11:06 +05:30
phy-bcm-sr-usb.c	phy: sr-usb: Add Stingray USB PHY driver	2019-04-17 14:12:48 +05:30
phy-brcm-sata.c	phy: brcm-sata: Implement 7216 initialization sequence	2020-01-08 12:58:06 +05:30
phy-brcm-usb-init-synopsys.c	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30
phy-brcm-usb-init.c	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30
phy-brcm-usb-init.h	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30
phy-brcm-usb.c	phy: usb: Add support for wake and USB low power mode for 7211 S2/S5	2020-01-08 12:58:06 +05:30