linux_dsm_epyc7002/drivers/tty/serial/8250
Ralf Ramsauer 8428413b1d serial: 8250_pci: Implement MSI(-X) support
There may be setups, where legacy interrupts are not available. This is
the caese, e.g., when Linux runs as guest (aka. non-root cell) of the
partitioning hypervisor Jailhouse. There, only MSI(-X) interrupts are
available for guests.

But the 8250_pci driver currently only supports legacy ints. So let's
enable MSI(-X) interrupts.

Nevertheless, this needs to handled with care: while many 8250 devices
actually claim to support MSI(-X) interrupts it should not be enabled be
default. I had at least one device in my hands with broken MSI
implementation.

So better introduce a whitelist with devices that are known to support
MSI(-X) interrupts. I tested all devices mentioned in the patch.

Signed-off-by: Ralf Ramsauer <ralf.ramsauer@oth-regensburg.de>
Link: https://lore.kernel.org/r/20190812112152.693622-1-ralf.ramsauer@oth-regensburg.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-04 12:43:55 +02:00
..
8250_accent.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
8250_acorn.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
8250_aspeed_vuart.c serial: 8250: Process sysrq at port unlock time 2018-11-09 09:07:18 -08:00
8250_bcm2835aux.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
8250_boca.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
8250_core.c serial: 8250: Don't check for mctrl_gpio_init() returning -ENOSYS 2019-09-04 12:43:50 +02:00
8250_dma.c serial: 8250: factor out serial8250_{set,clear}_THRI() helpers 2019-06-18 09:36:55 +02:00
8250_dw.c serial: 8250_dw: switch to use 8250_dwlib library 2019-09-04 12:43:52 +02:00
8250_dwlib.c serial: 8250_dw: split Synopsys DesignWare 8250 common functions 2019-09-04 12:43:52 +02:00
8250_dwlib.h serial: 8250_dw: split Synopsys DesignWare 8250 common functions 2019-09-04 12:43:52 +02:00
8250_early.c serial: 8250_early: Setup divider when uartclk is passed 2018-04-25 14:56:12 +02:00
8250_em.c headers: separate linux/mod_devicetable.h from linux/platform_device.h 2018-07-07 17:52:26 +02:00
8250_exar_st16c554.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
8250_exar.c serial: 8250_exar: Replace msleep(1) with usleep_range() 2019-09-04 12:43:51 +02:00
8250_fintek.c serial: 8250_fintek: Make fintek_8250_set_termios static 2019-03-28 00:29:03 +09:00
8250_fourport.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
8250_fsl.c serial: 8250: Rate limit serial port rx interrupts during input overruns 2018-12-17 16:02:57 +01:00
8250_gsc.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
8250_hp300.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
8250_hub6.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
8250_ingenic.c Serial: Ingenic: Add support for the X1000. 2019-01-30 09:31:30 +01:00
8250_lpc18xx.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
8250_lpss.c serial: 8250_lpss: Enable HS UART on Elkhart Lake 2019-09-04 12:43:53 +02:00
8250_men_mcb.c tty: fix up a few remaining files without SPDX identifiers 2019-04-04 18:48:43 +02:00
8250_mid.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
8250_mtk.c uart: mediatek: support Rx in-band wakeup 2019-06-10 19:10:27 +02:00
8250_of.c tty: serial: 8250-of: Do not warn on deferred probe 2019-06-10 19:12:09 +02:00
8250_omap.c serial: 8250_omap: Fix idling for unloaded serdev drivers 2019-09-04 12:43:43 +02:00
8250_pci.c serial: 8250_pci: Implement MSI(-X) support 2019-09-04 12:43:55 +02:00
8250_pnp.c serial: 8250_pnp: Move to struct dev_pm_ops 2019-09-04 12:43:46 +02:00
8250_port.c serial: 8250_pci: Add support for Sunix serial boards 2019-09-04 12:43:53 +02:00
8250_pxa.c serial: 8250_pxa: honor the port number from devicetree 2019-02-26 12:30:44 +01:00
8250_uniphier.c tty: Remove dev_err() usage after platform_get_irq() 2019-09-04 12:43:49 +02:00
8250.h tty/serial/8250: use mctrl_gpio helpers 2019-06-21 10:18:43 +02:00
Kconfig serial: 8250_pci: Merge 8250_moxa to 8250_pci 2019-09-04 12:43:54 +02:00
Makefile serial: 8250_pci: Merge 8250_moxa to 8250_pci 2019-09-04 12:43:54 +02:00
serial_cs.c drivers/tty: add error handling for pcmcia_loop_config 2018-06-28 21:23:44 +09:00