linux_dsm_epyc7002/drivers/clk/qcom/q6sstop-qcs404.c
Govind Singh 6cdef2738d clk: qcom: Add Q6SSTOP clock controller for QCS404
Add support for the Q6SSTOP clock control used on qcs404
based devices. This would allow wcss remoteproc driver to
control the required WCSS Q6SSTOP clock/reset controls to
bring the subsystem out of reset and shutdown the WCSS Q6DSP.

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Link: https://lkml.kernel.org/r/20191011132928.9388-3-govinds@codeaurora.org
[sboyd@kernel.org: Sort makefile]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-07 13:10:36 -08:00

224 lines
5.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2018, The Linux Foundation. All rights reserved.
*/
#include <linux/bitops.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/pm_clock.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <dt-bindings/clock/qcom,q6sstopcc-qcs404.h>
#include "clk-regmap.h"
#include "clk-branch.h"
#include "common.h"
#include "reset.h"
static struct clk_branch lcc_ahbfabric_cbc_clk = {
.halt_reg = 0x1b004,
.halt_check = BRANCH_HALT,
.clkr = {
.enable_reg = 0x1b004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_ahbfabric_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_ahbs_cbc_clk = {
.halt_reg = 0x22000,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x22000,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_ahbs_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_tcm_slave_cbc_clk = {
.halt_reg = 0x1c000,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x1c000,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_tcm_slave_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_ahbm_cbc_clk = {
.halt_reg = 0x22004,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x22004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_ahbm_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_axim_cbc_clk = {
.halt_reg = 0x1c004,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x1c004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_axim_cbc_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct clk_branch lcc_q6ss_bcr_sleep_clk = {
.halt_reg = 0x6004,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x6004,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "lcc_q6ss_bcr_sleep_clk",
.ops = &clk_branch2_ops,
},
},
};
/* TCSR clock */
static struct clk_branch tcsr_lcc_csr_cbcr_clk = {
.halt_reg = 0x8008,
.halt_check = BRANCH_VOTED,
.clkr = {
.enable_reg = 0x8008,
.enable_mask = BIT(0),
.hw.init = &(struct clk_init_data){
.name = "tcsr_lcc_csr_cbcr_clk",
.ops = &clk_branch2_ops,
},
},
};
static struct regmap_config q6sstop_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.fast_io = true,
};
static struct clk_regmap *q6sstop_qcs404_clocks[] = {
[LCC_AHBFABRIC_CBC_CLK] = &lcc_ahbfabric_cbc_clk.clkr,
[LCC_Q6SS_AHBS_CBC_CLK] = &lcc_q6ss_ahbs_cbc_clk.clkr,
[LCC_Q6SS_TCM_SLAVE_CBC_CLK] = &lcc_q6ss_tcm_slave_cbc_clk.clkr,
[LCC_Q6SS_AHBM_CBC_CLK] = &lcc_q6ss_ahbm_cbc_clk.clkr,
[LCC_Q6SS_AXIM_CBC_CLK] = &lcc_q6ss_axim_cbc_clk.clkr,
[LCC_Q6SS_BCR_SLEEP_CLK] = &lcc_q6ss_bcr_sleep_clk.clkr,
};
static const struct qcom_reset_map q6sstop_qcs404_resets[] = {
[Q6SSTOP_BCR_RESET] = { 0x6000 },
};
static const struct qcom_cc_desc q6sstop_qcs404_desc = {
.config = &q6sstop_regmap_config,
.clks = q6sstop_qcs404_clocks,
.num_clks = ARRAY_SIZE(q6sstop_qcs404_clocks),
.resets = q6sstop_qcs404_resets,
.num_resets = ARRAY_SIZE(q6sstop_qcs404_resets),
};
static struct clk_regmap *tcsr_qcs404_clocks[] = {
[TCSR_Q6SS_LCC_CBCR_CLK] = &tcsr_lcc_csr_cbcr_clk.clkr,
};
static const struct qcom_cc_desc tcsr_qcs404_desc = {
.config = &q6sstop_regmap_config,
.clks = tcsr_qcs404_clocks,
.num_clks = ARRAY_SIZE(tcsr_qcs404_clocks),
};
static const struct of_device_id q6sstopcc_qcs404_match_table[] = {
{ .compatible = "qcom,qcs404-q6sstopcc" },
{ }
};
MODULE_DEVICE_TABLE(of, q6sstopcc_qcs404_match_table);
static int q6sstopcc_qcs404_probe(struct platform_device *pdev)
{
const struct qcom_cc_desc *desc;
int ret;
pm_runtime_enable(&pdev->dev);
ret = pm_clk_create(&pdev->dev);
if (ret)
goto disable_pm_runtime;
ret = pm_clk_add(&pdev->dev, NULL);
if (ret < 0) {
dev_err(&pdev->dev, "failed to acquire iface clock\n");
goto destroy_pm_clk;
}
q6sstop_regmap_config.name = "q6sstop_tcsr";
desc = &tcsr_qcs404_desc;
ret = qcom_cc_probe_by_index(pdev, 1, desc);
if (ret)
goto destroy_pm_clk;
q6sstop_regmap_config.name = "q6sstop_cc";
desc = &q6sstop_qcs404_desc;
ret = qcom_cc_probe_by_index(pdev, 0, desc);
if (ret)
goto destroy_pm_clk;
return 0;
destroy_pm_clk:
pm_clk_destroy(&pdev->dev);
disable_pm_runtime:
pm_runtime_disable(&pdev->dev);
return ret;
}
static int q6sstopcc_qcs404_remove(struct platform_device *pdev)
{
pm_clk_destroy(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return 0;
}
static const struct dev_pm_ops q6sstopcc_pm_ops = {
SET_RUNTIME_PM_OPS(pm_clk_suspend, pm_clk_resume, NULL)
};
static struct platform_driver q6sstopcc_qcs404_driver = {
.probe = q6sstopcc_qcs404_probe,
.remove = q6sstopcc_qcs404_remove,
.driver = {
.name = "qcs404-q6sstopcc",
.of_match_table = q6sstopcc_qcs404_match_table,
.pm = &q6sstopcc_pm_ops,
},
};
module_platform_driver(q6sstopcc_qcs404_driver);
MODULE_DESCRIPTION("QTI QCS404 Q6SSTOP Clock Controller Driver");
MODULE_LICENSE("GPL v2");