Douglas Anderson be5c560996 clk: qcom: gcc-sc7180: Use floor ops for sdcc clks ... [ Upstream commit 6d37a8d192830267e6b10a6d57ae28d2e89097e7 ] I would repeat the same commit message that was in commit 5e4b7e82d4 ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems silly to do so when you could just go read that commit. NOTE: this is actually extra terrible because we're missing the 50 MHz rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2")). That means then when you run an older SD card it'll try to clock it at 100 MHz when it's only specced to run at 50 MHz max. As you can probably guess that doesn't work super well. Signed-off-by: Douglas Anderson <dianders@chromium.org> Fixes: 17269568f7 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Link: https://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>		2020-12-30 11:53:48 +01:00
..
a53-pll.c	clk: qcom: Add A53 PLL support	2018-01-02 10:00:24 -08:00
apcs-msm8916.c	clk: qcom: apcs-msm8916: use clk_parent_data to specify the parent	2020-01-04 23:15:47 -08:00
apss-ipq6018.c	clk: qcom: Fix return value check in apss_ipq6018_probe()	2020-06-29 14:15:34 -07:00
apss-ipq-pll.c	clk: qcom: Add ipq apss pll driver	2020-06-22 00:21:59 -07:00
camcc-sdm845.c	clk: qcom: Add camera clock controller driver for SDM845	2018-08-30 18:27:06 -07:00
clk-alpha-pll.c	clk/qcom: fix spelling typo	2020-10-13 16:32:27 -07:00
clk-alpha-pll.h	clk: qcom: clk-alpha-pll: use the right PCAL_DONE value for lucid pll	2020-07-24 01:51:11 -07:00
clk-branch.c	clk: qcom: branch: Add AON clock ops	2019-04-11 13:34:21 -07:00
clk-branch.h	clk: qcom: branch: Add AON clock ops	2019-04-11 13:34:21 -07:00
clk-cpu-8996.c	clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static	2020-07-20 17:40:18 -07:00
clk-hfpll.c	clk: let init callback return an error code	2019-12-23 18:53:13 -08:00
clk-hfpll.h	clk: qcom: Add support for High-Frequency PLLs (HFPLLs)	2018-10-17 13:14:37 -07:00
clk-krait.c	clk: qcom: Add safe switch hook for krait mux clocks	2018-10-17 13:15:05 -07:00
clk-krait.h	clk: qcom: Add safe switch hook for krait mux clocks	2018-10-17 13:15:05 -07:00
clk-pll.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
clk-pll.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
clk-rcg2.c	clk: qcom: dispcc: Update DP clk ops for phy design	2020-09-22 11:51:08 -07:00
clk-rcg.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
clk-rcg.h	clk: qcom: rcg2: Add support for display port clock ops	2019-12-18 21:22:00 -08:00
clk-regmap-divider.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
clk-regmap-divider.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
clk-regmap-mux-div.c	clk: qcom: Add regmap mux-div clocks support	2018-01-02 10:00:24 -08:00
clk-regmap-mux-div.h	clk: qcom: Use the correct style for SPDX License Identifier	2019-05-01 13:01:13 -07:00
clk-regmap-mux.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
clk-regmap-mux.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
clk-regmap.c	clk: qcom: Update SPDX headers for common files	2018-07-25 09:23:33 -07:00
clk-regmap.h	clk: define to_clk_regmap() as inline function	2020-10-28 16:34:44 -07:00
clk-rpm.c	clk: qcom: clk-rpm: add missing rpm clk for ipq806x	2020-03-13 13:56:31 -07:00
clk-rpmh.c	clk: qcom: rpmh: Drop unnecessary semicolons	2020-03-24 19:35:02 -07:00
clk-smd-rpm.c	clk: qcom: smd: Add support for MSM8992/4 rpm clocks	2020-07-11 09:19:24 -07:00
clk-spmi-pmic-div.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 284	2019-06-05 17:36:37 +02:00
common.c	clk: qcom: Allow constant ratio freq tables for rcg	2019-11-07 13:43:19 -08:00
common.h	clk: qcom: define probe by index API as common API	2019-08-08 08:20:01 -07:00
dispcc-sc7180.c	clk: qcom: dispcc: Update DP clk ops for phy design	2020-09-22 11:51:08 -07:00
dispcc-sdm845.c	clk: qcom: dispcc: Add support for display port clocks	2019-12-18 21:24:13 -08:00
dispcc-sm8250.c	clk: qcom: Add display clock controller driver for SM8150 and SM8250	2020-10-13 18:18:06 -07:00
gcc-apq8084.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
gcc-ipq806x.c	ipq806x: gcc: add support for child probe	2020-07-21 00:10:21 -07:00
gcc-ipq4019.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
gcc-ipq6018.c	clk: qcom: Add ipq6018 Global Clock Controller support	2020-01-09 12:42:55 -08:00
gcc-ipq8074.c	clk: qcom: ipq8074: make pcie0_rchng_clk_src static	2020-09-22 11:34:33 -07:00
gcc-mdm9615.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
gcc-msm8660.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
gcc-msm8916.c	clk: qcom: msm8916: Fix the address location of pll->config_reg	2020-04-21 19:45:18 -07:00
gcc-msm8939.c	clk: qcom: gcc-msm8939: remove defined but not used variables	2020-09-22 11:50:23 -07:00
gcc-msm8960.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
gcc-msm8974.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
gcc-msm8994.c	clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs	2020-10-13 18:04:36 -07:00
gcc-msm8996.c	clk: qcom: gcc-msm8996: Fix parent for CLKREF clocks	2020-01-06 08:55:28 -08:00
gcc-msm8998.c	clk: qcom: Add missing msm8998 ufs_unipro_core_clk_src	2020-05-28 16:52:25 -07:00
gcc-qcs404.c	clk: qcom: gcc: limit GPLL0_AO_OUT operating frequency	2019-12-18 22:07:52 -08:00
gcc-sc7180.c	clk: qcom: gcc-sc7180: Use floor ops for sdcc clks	2020-12-30 11:53:48 +01:00
gcc-sdm660.c	clk: qcom: gcc-sdm660: Fix wrong parent_map	2020-09-22 12:06:19 -07:00
gcc-sdm845.c	clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845	2020-07-21 00:44:11 -07:00
gcc-sm8150.c	clk: qcom: gcc: remove unnecessary vco_table from SM8150	2020-07-24 01:51:14 -07:00
gcc-sm8250.c	clk: qcom: gcc: Add global clock controller driver for SM8250	2020-03-09 15:14:57 -07:00
gdsc.c	clk: qcom: gdsc: Keep RETAIN_FF bit set if gdsc is already on	2020-10-20 09:28:55 -07:00
gdsc.h	clk: qcom: gdsc: Add support to enable retention of GSDCR	2020-07-24 13:04:48 -07:00
gpucc-msm8998.c	clk: qcom: Avoid SMMU/cx gdsc corner cases	2019-12-18 22:02:27 -08:00
gpucc-sc7180.c	clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers	2020-07-24 01:51:26 -07:00
gpucc-sdm845.c	clk: qcom: add common gdsc_gx_do_nothing_enable for gpucc drivers	2020-07-24 01:51:26 -07:00
gpucc-sm8150.c	clk: qcom: Add graphics clock controller driver for SM8150	2020-07-24 01:51:29 -07:00
gpucc-sm8250.c	clk: qcom: Add graphics clock controller driver for SM8250	2020-07-24 01:51:32 -07:00
hfpll.c	clk: qcom: hfpll: use clk_parent_data to specify the parent	2019-12-18 22:07:52 -08:00
Kconfig	clk: qcom: Add display clock controller driver for SM8150 and SM8250	2020-10-13 18:18:06 -07:00
kpss-xcc.c	clk: qcom: Add KPSS ACC/GCC driver	2018-10-17 13:14:54 -07:00
krait-cc.c	clk: qcom: Add safe switch hook for krait mux clocks	2018-10-17 13:15:05 -07:00
lcc-ipq806x.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
lcc-mdm9615.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
lcc-msm8960.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
lpasscc-sdm845.c	clk: qcom: define probe by index API as common API	2019-08-08 08:20:01 -07:00
lpasscorecc-sc7180.c	clk: qcom: lpass: Correct goto target in lpass_core_sc7180_probe()	2020-09-10 13:42:35 -07:00
Makefile	clk: qcom: Add display clock controller driver for SM8150 and SM8250	2020-10-13 18:18:06 -07:00
mmcc-apq8084.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
mmcc-msm8960.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
mmcc-msm8974.c	clk: qcom: mmcc8974: move gfx3d_clk_src from the mmcc to rpm	2019-12-18 21:27:44 -08:00
mmcc-msm8996.c	clk: qcom: mmcc-msm8996: Properly describe GPU_GX gdsc	2020-05-14 14:23:42 -07:00
mmcc-msm8998.c	clk: qcom: Add MSM8998 Multimedia Clock Controller (MMCC) driver	2019-12-18 21:37:40 -08:00
mss-sc7180.c	clk: qcom: Add modem clock controller driver for SC7180	2020-03-20 16:28:05 -07:00
q6sstop-qcs404.c	clk: qcom: Add Q6SSTOP clock controller for QCS404	2019-11-07 13:10:36 -08:00
reset.c	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
reset.h	treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282	2019-06-05 17:36:37 +02:00
turingcc-qcs404.c	clk: qcom: fix QCS404 TuringCC regmap	2019-09-09 09:05:22 -07:00
videocc-sc7180.c	clk: qcom: videocc: Update the clock flag for video_cc_vcodec0_core_clk	2020-02-12 15:02:44 -08:00
videocc-sdm845.c	clk: qcom: Move frequency table macro to common file	2018-07-06 16:45:51 -07:00
videocc-sm8150.c	clk: qcom: add video clock controller driver for SM8150	2020-10-13 18:05:04 -07:00
videocc-sm8250.c	clk: qcom: add video clock controller driver for SM8250	2020-10-13 18:05:04 -07:00