mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 13:40:53 +07:00
3fd14cdcc0
Core: * Remove support for asynchronous erase (not implemented by any of the existing drivers anyway) * Remove Cyrille from the list of SPI NOR and MTD maintainers * Fix kernel doc headers * Allow users to define the partitions parsers they want to test through a DT property (compatible of the partitions subnode) * Remove the bfin-async-flash driver (the only architecture using it has been removed) * Fix pagetest test * Add extra checks in mtd_erase() * Simplify the MTD partition creation logic and get rid of mtd_add_device_partitions() Drivers: * Add endianness information to the physmap DT binding * Add Eon EN29LV400A IDs to JEDEC probe logic * Use %*ph where appropriate SPI NOR changes: Drivers: * Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller * Remove an unneeded driver.bus assigned in the fsl-qspi driver NAND changes: Core: * Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices * Move onenand code base to the drivers/mtd/nand/ dir * Rework timing mode selection * Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported * Stop embedding ONFI/JEDEC param page in nand_chip Drivers: * Rework/cleanup of the mxc driver * Various cleanups in the vf610 driver * Migrate the fsmc and vf610 to ->exec_op() * Get rid of the pxa driver (replaced by marvell_nand) * Support ->setup_data_interface() in the GPMI driver * Fix probe error path in several drivers * Remove support for unused hw_syndrome mode in sunxi_nand * Various minor improvements -----BEGIN PGP SIGNATURE----- iQI5BAABCAAjBQJaxTXfHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ Ze02AX4ItwDeFhAAs+OmGip0LHk+D7gFCBONtypOGRi0nmGsi6PkhKtUZBob6/Y2 JoJhTrHx/LsRpqcuh3Y8KSCp0CG5WlZX2m1RU1yrcqiWvTfiXHlv6aQGfiE/esRb Ei4QNiND8hg+hyzc6I5wRrAuJ7jPP5BanX+n9TyvygaA1Ic5pcur0gssoYKeJTia 18pUV+RLe67wfP02uT0GJvmXd5ecIpu0OVhmJPye2UQqnfl+eiJ2zI4TJAZN3zRW tD9XiX3/GP8oCnvC+1kZw48a2c/qiHs/DKCdDcH6SDTKzKha4zCgaX4220X3AqPK rScrFTKxiCa1utZPn9EplnW6ZW3Ud46GqReWGRQZuyphu/ntdkNim7nuJMUZfEFL RFtMLhXDs1aXUaYJ6F3YQeajHxVU6Ugl34UQCraCXbfmzqCkaKfgXm3EVb9d2duY rCkrS5N4gSQXp5SMvc0aiu2TnsRX2OCthGg0NBdHG9AaVhwuj0neeSFQ/XFPxOeh 5jQKo4umR7tr2Md7osSx0PVxVo8uO5smqcl90SsdwrjxQxL7z1u/SJBjRf6pJDzQ cR1o+H9jBXecqD6m+dN3H/h0sMwHzefsASkxYNxl2OeRGYsJvBpuoQF8yUD9jnRS AzHhWhUNo8g3FxDe7kKgsMXoqnr/pKopMCRxVbeEkhDFNsTvBde10/Xo09U= =EG7L -----END PGP SIGNATURE----- Merge tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd Pull MTD updates from Boris Brezillon: "MTD Core: - Remove support for asynchronous erase (not implemented by any of the existing drivers anyway) - Remove Cyrille from the list of SPI NOR and MTD maintainers - Fix kernel doc headers - Allow users to define the partitions parsers they want to test through a DT property (compatible of the partitions subnode) - Remove the bfin-async-flash driver (the only architecture using it has been removed) - Fix pagetest test - Add extra checks in mtd_erase() - Simplify the MTD partition creation logic and get rid of mtd_add_device_partitions() MTD Drivers: - Add endianness information to the physmap DT binding - Add Eon EN29LV400A IDs to JEDEC probe logic - Use %*ph where appropriate SPI NOR Drivers: - Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller - Remove an unneeded driver.bus assigned in the fsl-qspi driver NAND Core: - Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices - Move onenand code base to the drivers/mtd/nand/ dir - Rework timing mode selection - Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported - Stop embedding ONFI/JEDEC param page in nand_chip NAND Drivers: - Rework/cleanup of the mxc driver - Various cleanups in the vf610 driver - Migrate the fsmc and vf610 to ->exec_op() - Get rid of the pxa driver (replaced by marvell_nand) - Support ->setup_data_interface() in the GPMI driver - Fix probe error path in several drivers - Remove support for unused hw_syndrome mode in sunxi_nand - Various minor improvements" * tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits) dt-bindings: fsl-quadspi: Add the example of two SPI NOR mtd: fsl-quadspi: Distinguish the mtd device names mtd: nand: Fix some function description mismatches in core.c mtd: fsl-quadspi: Remove unneeded driver.bus assignment mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk mtd: rawnand: s3c2410: enhance the probe function error path mtd: rawnand: tango: fix probe function error path mtd: rawnand: sh_flctl: fix the probe function error path mtd: rawnand: omap2: fix the probe function error path mtd: rawnand: mxc: fix probe function error path mtd: rawnand: denali: fix probe function error path mtd: rawnand: davinci: fix probe function error path mtd: rawnand: cafe: fix probe function error path mtd: rawnand: brcmnand: fix probe function error path mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode mtd: rawnand: marvell: Fix clock resource by adding a register clock mtd: ftl: Use DIV_ROUND_UP() mtd: Fix some function description mismatches in mtdcore.c mtd: physmap_of: update struct map_info's swap as per map requirement dt-bindings: mtd-physmap: Add endianness supports ... |
||
---|---|---|
.. | ||
80211 | ||
dmaengine | ||
firmware | ||
gpio | ||
iio | ||
pm | ||
soundwire | ||
usb | ||
basics.rst | ||
conf.py | ||
device_connection.rst | ||
device_link.rst | ||
device-io.rst | ||
dma-buf.rst | ||
edac.rst | ||
frame-buffer.rst | ||
hsi.rst | ||
i2c.rst | ||
index.rst | ||
infrastructure.rst | ||
input.rst | ||
libata.rst | ||
message-based.rst | ||
misc_devices.rst | ||
miscellaneous.rst | ||
mtdnand.rst | ||
pci.rst | ||
pinctl.rst | ||
rapidio.rst | ||
regulator.rst | ||
s390-drivers.rst | ||
scsi.rst | ||
slimbus.rst | ||
sound.rst | ||
spi.rst | ||
uio-howto.rst | ||
vme.rst | ||
w1.rst |