linux_dsm_epyc7002/drivers/tty/serial
Shubhrajyoti Datta 86df8dd147 serial: uartps: Add the device_init_wakeup
Initialise the device wakeup.

The device_init_wakeup is needed for the wakeup to work by default.
Uart can be configured as the primary wakeup source so it is good to
enable wakeup by default.

The same functionality is enabled also by 8250_omap, atmel_serial,
omap-serial and stm32-usart.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-19 08:23:20 +01:00
..
8250 serial: 8250: Rate limit serial port rx interrupts during input overruns 2018-12-17 16:02:57 +01:00
cpm_uart mm: remove include/linux/bootmem.h 2018-10-31 08:54:16 -07:00
jsm tty: serial: jsm: remove redundant pointer ch 2018-07-13 15:36:32 +02:00
21285.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
altera_jtaguart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
altera_uart.c serial: altera: set RRDY flag also without irq 2018-02-28 13:30:09 +01:00
amba-pl010.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
amba-pl011.c serial: set suppress_bind_attrs flag only if builtin 2018-11-09 09:07:17 -08:00
amba-pl011.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
apbuart.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
apbuart.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ar933x_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
arc_uart.c serial: arc_uart: Fix out-of-bounds access through DT alias 2018-02-28 15:29:59 +01:00
atmel_serial.c tty/serial: atmel: add ISO7816 support 2018-10-02 13:38:55 -07:00
atmel_serial.h tty/serial: atmel: add ISO7816 support 2018-10-02 13:38:55 -07:00
bcm63xx_uart.c MIPS changes for 4.15 2017-11-15 11:36:08 -08:00
clps711x.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
digicolor-usart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
dz.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
dz.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
earlycon-arm-semihost.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
earlycon.c earlycon: Remove hardcoded port->uartclk initialization in of_setup_earlycon 2018-05-14 13:41:05 +02:00
efm32-uart.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
fsl_lpuart.c serial: fsl_lpuart: clear parity enable bit when disable parity 2018-11-09 08:48:57 -08:00
icom.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
icom.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
ifx6x60.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
ifx6x60.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
imx.c serial: imx: fix error handling in console_setup 2018-11-27 09:56:20 +01:00
ioc3_serial.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
ioc4_serial.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
ip22zilog.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
ip22zilog.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Kconfig tty/serial: atmel: Change the driver to work under at91-usart MFD 2018-09-10 16:12:43 +01:00
kgdb_nmi.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
kgdboc.c kgdboc: fix KASAN global-out-of-bounds bug in param_set_kgdboc_var() 2018-12-06 15:59:07 +01:00
lantiq.c serial: lantiq: Change init_lqasc to static declaration 2018-11-09 08:43:27 -08:00
lpc32xx_hs.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
Makefile TTY/Serial driver patches for 4.17-rc1 2018-04-04 18:43:49 -07:00
max310x.c serial: max310x: Check the clock readiness 2018-06-28 21:07:54 +09:00
max3100.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
mcf.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
men_z135_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
meson_uart.c tty: serial: meson: fix typo in the "stop bit" register definition 2017-11-28 15:32:33 +01:00
mpc52xx_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
mps2-uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
mpsc.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
msm_serial.c tty: serial: msm_serial: Add __maybe_unused to suspend/resume callbacks 2018-05-14 13:41:05 +02:00
mux.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
mvebu-uart.c serial: mvebu-uart: initialize over sampling stack register 2018-11-27 09:20:17 +01:00
mxs-auart.c serial: mxs-auart: Fix potential infinite loop 2018-09-18 16:07:24 +02:00
netx-serial.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
omap-serial.c tty: omap-serial: Fix initial on-boot RTS GPIO level 2018-01-09 16:45:17 +01:00
owl-uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
pch_uart.c pch_uart: remove set but not used variable 'tx_empty' 2018-11-09 09:07:17 -08:00
pic32_uart.c serial: set suppress_bind_attrs flag only if builtin 2018-11-09 09:07:17 -08:00
pic32_uart.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
pmac_zilog.c tty: Use of_node_name_{eq,prefix} for node name comparisons 2018-12-17 16:12:17 +01:00
pmac_zilog.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pnx8xxx_uart.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
pxa.c serial: pxa: Fix an error handling path in 'serial_pxa_probe()' 2018-06-28 21:07:54 +09:00
qcom_geni_serial.c tty: serial: qcom_geni_serial: Remove interrupt storm 2018-12-17 15:06:46 +01:00
rp2.c treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
sa1100.c treewide: setup_timer() -> timer_setup() 2017-11-21 15:57:07 -08:00
samsung.c tty: serial: samsung: Increase maximum baudrate 2018-12-17 16:16:28 +01:00
samsung.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
sb1250-duart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
sc16is7xx.c sc16is7xx: Fix for "Unexpected interrupt: 8" 2018-09-18 16:07:25 +02:00
sccnxp.c headers: separate linux/mod_devicetable.h from linux/platform_device.h 2018-07-07 17:52:26 +02:00
serial_core.c tty/serial: do not free trasnmit buffer page under port lock 2018-12-17 16:11:23 +01:00
serial_ks8695.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
serial_mctrl_gpio.c gpiolib: Pass array info to get/set array functions 2018-09-13 11:16:54 +02:00
serial_mctrl_gpio.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
serial_txx9.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
serial-tegra.c serial: tegra: fix some spelling mistakes 2018-11-09 08:58:18 -08:00
sh-sci.c serial: sh-sci: Resume PIO in sci_rx_interrupt() on DMA failure 2018-12-17 15:04:11 +01:00
sh-sci.h serial: sh-sci: Support for HSCIF RX sampling point adjustment 2018-04-23 10:08:18 +02:00
sirfsoc_uart.c serial: sirf: Fix out-of-bounds access through DT alias 2018-02-28 15:30:00 +01:00
sirfsoc_uart.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
sn_console.c TTY: sn_console: Replace spin_is_locked() with spin_trylock() 2018-10-04 11:06:35 -07:00
sprd_serial.c serial: sprd: Fix the indentation issue 2018-09-18 16:07:24 +02:00
st-asc.c tty: serial: simplify getting .drvdata 2018-04-22 17:29:43 +02:00
stm32-usart.c serial: stm32: fix initialization of RS485 mode 2018-03-15 17:39:43 +01:00
stm32-usart.h serial: stm32: add support for RS485 hardware control mode 2018-03-14 13:35:37 +01:00
suncore.c tty: Use of_node_name_{eq,prefix} for node name comparisons 2018-12-17 16:12:17 +01:00
sunhv.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
sunsab.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sunsab.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sunsu.c tty: Use of_node_name_{eq,prefix} for node name comparisons 2018-12-17 16:12:17 +01:00
sunzilog.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
sunzilog.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
timbuart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
timbuart.h tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
uartlite.c serial-uartlite: fix null pointer dereference on pointer port 2018-11-27 09:08:15 +01:00
ucc_uart.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
vr41xx_siu.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
vt8500_serial.c tty: serial: Remove redundant license text 2017-11-08 13:08:12 +01:00
xilinx_uartps.c serial: uartps: Add the device_init_wakeup 2018-12-19 08:23:20 +01:00
zs.c tty: add SPDX identifiers to all remaining files in drivers/tty/ 2017-11-08 13:08:12 +01:00
zs.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00