linux_dsm_epyc7002/arch/arm/boot/dts/meson6.dtsi
Martin Blumenstingl 7b141abe4a ARM: dts: meson: add the clock inputs for the Meson timer
The Meson Timer IP block has two clock inputs:
- clk81 for using the system clock as timebase
- xtal for a timebase with 1us, 10us, 100us and 1ms resolution

The clocksource driver does not use these yet, but it's still a good
idea to add them as this describes how the hardware actually works
internally.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2018-11-28 16:49:03 -08:00

115 lines
3.3 KiB
Plaintext

/*
* Copyright 2014 Carlo Caione <carlo@caione.org>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this library; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "meson.dtsi"
/ {
model = "Amlogic Meson6 SoC";
compatible = "amlogic,meson6";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x200>;
};
cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x201>;
};
};
xtal: xtal-clk {
compatible = "fixed-clock";
clock-frequency = <24000000>;
clock-output-names = "xtal";
#clock-cells = <0>;
};
clk81: clk@0 {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <200000000>;
};
}; /* end of / */
&efuse {
status = "disabled";
};
&timer_abcde {
clocks = <&xtal>, <&clk81>;
clock-names = "xtal", "pclk";
};
&uart_AO {
clocks = <&xtal>, <&clk81>, <&clk81>;
clock-names = "xtal", "pclk", "baud";
};
&uart_A {
clocks = <&xtal>, <&clk81>, <&clk81>;
clock-names = "xtal", "pclk", "baud";
};
&uart_B {
clocks = <&xtal>, <&clk81>, <&clk81>;
clock-names = "xtal", "pclk", "baud";
};
&uart_C {
clocks = <&xtal>, <&clk81>, <&clk81>;
clock-names = "xtal", "pclk", "baud";
};