linux_dsm_epyc7002/arch/mips/alchemy/gpr/platform.c
Wolfgang Grandegger cb8f55b920 MIPS: Alchemy: Add basic support for the GPR board
From: Wolfgang Grandegger <wg@denx.de>

Add basic support for the General Purpose Router (GPR) board from
Trapeze ITS.

Signed-off-by: Wolfgang Grandegger <wg@denx.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1460/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-05 13:26:09 +01:00

184 lines
3.8 KiB
C

/*
* GPR board platform device registration
*
* Copyright (C) 2010 Wolfgang Grandegger <wg@denx.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/i2c.h>
#include <linux/i2c-gpio.h>
#include <asm/mach-au1x00/au1000.h>
/*
* Watchdog
*/
static struct resource gpr_wdt_resource[] = {
[0] = {
.start = 1,
.end = 1,
.name = "gpr-adm6320-wdt",
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device gpr_wdt_device = {
.name = "adm6320-wdt",
.id = 0,
.num_resources = ARRAY_SIZE(gpr_wdt_resource),
.resource = gpr_wdt_resource,
};
/*
* FLASH
*
* 0x00000000-0x00200000 : "kernel"
* 0x00200000-0x00a00000 : "rootfs"
* 0x01d00000-0x01f00000 : "config"
* 0x01c00000-0x01d00000 : "yamon"
* 0x01d00000-0x01d40000 : "yamon env vars"
* 0x00000000-0x00a00000 : "kernel+rootfs"
*/
static struct mtd_partition gpr_mtd_partitions[] = {
{
.name = "kernel",
.size = 0x00200000,
.offset = 0,
},
{
.name = "rootfs",
.size = 0x00800000,
.offset = MTDPART_OFS_APPEND,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "config",
.size = 0x00200000,
.offset = 0x01d00000,
},
{
.name = "yamon",
.size = 0x00100000,
.offset = 0x01c00000,
},
{
.name = "yamon env vars",
.size = 0x00040000,
.offset = MTDPART_OFS_APPEND,
},
{
.name = "kernel+rootfs",
.size = 0x00a00000,
.offset = 0,
},
};
static struct physmap_flash_data gpr_flash_data = {
.width = 4,
.nr_parts = ARRAY_SIZE(gpr_mtd_partitions),
.parts = gpr_mtd_partitions,
};
static struct resource gpr_mtd_resource = {
.start = 0x1e000000,
.end = 0x1fffffff,
.flags = IORESOURCE_MEM,
};
static struct platform_device gpr_mtd_device = {
.name = "physmap-flash",
.dev = {
.platform_data = &gpr_flash_data,
},
.num_resources = 1,
.resource = &gpr_mtd_resource,
};
/*
* LEDs
*/
static struct gpio_led gpr_gpio_leds[] = {
{ /* green */
.name = "gpr:green",
.gpio = 4,
.active_low = 1,
},
{ /* red */
.name = "gpr:red",
.gpio = 5,
.active_low = 1,
}
};
static struct gpio_led_platform_data gpr_led_data = {
.num_leds = ARRAY_SIZE(gpr_gpio_leds),
.leds = gpr_gpio_leds,
};
static struct platform_device gpr_led_devices = {
.name = "leds-gpio",
.id = -1,
.dev = {
.platform_data = &gpr_led_data,
}
};
/*
* I2C
*/
static struct i2c_gpio_platform_data gpr_i2c_data = {
.sda_pin = 209,
.sda_is_open_drain = 1,
.scl_pin = 210,
.scl_is_open_drain = 1,
.udelay = 2, /* ~100 kHz */
.timeout = HZ,
};
static struct platform_device gpr_i2c_device = {
.name = "i2c-gpio",
.id = -1,
.dev.platform_data = &gpr_i2c_data,
};
static struct i2c_board_info gpr_i2c_info[] __initdata = {
{
I2C_BOARD_INFO("lm83", 0x18),
.type = "lm83"
}
};
static struct platform_device *gpr_devices[] __initdata = {
&gpr_wdt_device,
&gpr_mtd_device,
&gpr_i2c_device,
&gpr_led_devices,
};
static int __init gpr_dev_init(void)
{
i2c_register_board_info(0, gpr_i2c_info, ARRAY_SIZE(gpr_i2c_info));
return platform_add_devices(gpr_devices, ARRAY_SIZE(gpr_devices));
}
device_initcall(gpr_dev_init);