mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 23:56:44 +07:00
05ff1e3fb8
Commitd4ec0cb050("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") added a new fixed regulator ("voltage-regulator-6") to base "midas" .dtsi, but it didn't update the clients of that .dtsi, which define their own fixed regulators starting from the "voltage-regulator-6". This results in aliasing of the regulator dt nodes and breaks operation of OLED panel due to lack of power supply. Fix this by increasing the numbers in the fixed regulator names for those boards. Link: https://lore.kernel.org/r/20200316173710.3144-1-krzk@kernel.org Fixes:d4ec0cb050("ARM: dts: exynos: Add support for the touch-sensitive buttons on Midas family") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Denis 'GNUtoo' Carikli <GNUtoo@cyberdimension.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
176 lines
3.6 KiB
Plaintext
176 lines
3.6 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Samsung's Exynos4412 based Galaxy S3 board device tree source
|
|
*
|
|
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "exynos4412-midas.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
i2c9 = &i2c_ak8975;
|
|
i2c10 = &i2c_cm36651;
|
|
};
|
|
|
|
aat1290 {
|
|
compatible = "skyworks,aat1290";
|
|
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
|
|
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
pinctrl-names = "default", "host", "isp";
|
|
pinctrl-0 = <&camera_flash_host>;
|
|
pinctrl-1 = <&camera_flash_host>;
|
|
pinctrl-2 = <&camera_flash_isp>;
|
|
|
|
flash-led {
|
|
label = "flash";
|
|
led-max-microamp = <520833>;
|
|
flash-max-microamp = <1012500>;
|
|
flash-max-timeout-us = <1940000>;
|
|
};
|
|
};
|
|
|
|
lcd_vdd3_reg: voltage-regulator-7 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LCD_VDD_2.2V";
|
|
regulator-min-microvolt = <2200000>;
|
|
regulator-max-microvolt = <2200000>;
|
|
gpio = <&gpc0 1 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
ps_als_reg: voltage-regulator-8 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "LED_A_3.0V";
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
gpio = <&gpj0 5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
i2c_ak8975: i2c-gpio-0 {
|
|
compatible = "i2c-gpio";
|
|
gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
ak8975@c {
|
|
compatible = "asahi-kasei,ak8975";
|
|
reg = <0x0c>;
|
|
gpios = <&gpj0 7 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
i2c_cm36651: i2c-gpio-2 {
|
|
compatible = "i2c-gpio";
|
|
gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
|
|
i2c-gpio,delay-us = <2>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cm36651@18 {
|
|
compatible = "capella,cm36651";
|
|
reg = <0x18>;
|
|
interrupt-parent = <&gpx0>;
|
|
interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
|
|
vled-supply = <&ps_als_reg>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&buck9_reg {
|
|
maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
&cam_af_reg {
|
|
gpio = <&gpm0 4 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&cam_io_reg {
|
|
gpio = <&gpm0 2 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|
|
|
|
&dsi_0 {
|
|
status = "okay";
|
|
|
|
panel@0 {
|
|
compatible = "samsung,s6e8aa0";
|
|
reg = <0>;
|
|
vdd3-supply = <&lcd_vdd3_reg>;
|
|
vci-supply = <&ldo25_reg>;
|
|
reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>;
|
|
power-on-delay= <50>;
|
|
reset-delay = <100>;
|
|
init-delay = <100>;
|
|
flip-horizontal;
|
|
flip-vertical;
|
|
panel-width-mm = <58>;
|
|
panel-height-mm = <103>;
|
|
|
|
display-timings {
|
|
timing-0 {
|
|
clock-frequency = <57153600>;
|
|
hactive = <720>;
|
|
vactive = <1280>;
|
|
hfront-porch = <5>;
|
|
hback-porch = <5>;
|
|
hsync-len = <5>;
|
|
vfront-porch = <13>;
|
|
vback-porch = <1>;
|
|
vsync-len = <2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c_3 {
|
|
mms114-touchscreen@48 {
|
|
compatible = "melfas,mms114";
|
|
reg = <0x48>;
|
|
interrupt-parent = <&gpm2>;
|
|
interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
|
|
touchscreen-size-x = <720>;
|
|
touchscreen-size-y = <1280>;
|
|
avdd-supply = <&ldo23_reg>;
|
|
vdd-supply = <&ldo24_reg>;
|
|
};
|
|
};
|
|
|
|
&ldo25_reg {
|
|
regulator-name = "LCD_VCC_3.3V";
|
|
regulator-min-microvolt = <2800000>;
|
|
regulator-max-microvolt = <2800000>;
|
|
};
|
|
|
|
&pinctrl_0 {
|
|
camera_flash_host: camera-flash-host {
|
|
samsung,pins = "gpj1-0";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
|
|
samsung,pin-val = <0>;
|
|
};
|
|
|
|
camera_flash_isp: camera-flash-isp {
|
|
samsung,pins = "gpj1-0";
|
|
samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
|
|
samsung,pin-val = <1>;
|
|
};
|
|
};
|
|
|
|
&s5c73m3 {
|
|
standby-gpios = <&gpm0 1 GPIO_ACTIVE_LOW>; /* ISP_STANDBY */
|
|
vdda-supply = <&ldo17_reg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&touchkey_reg {
|
|
gpio = <&gpm0 0 GPIO_ACTIVE_HIGH>;
|
|
status = "okay";
|
|
};
|