mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 14:15:10 +07:00
621c4b999e
Add usb2 controller node for P1020RDB, P2020RDB, P2020DS, P1021MDS Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
326 lines
7.7 KiB
Plaintext
326 lines
7.7 KiB
Plaintext
/*
|
|
* P1021 MDS Device Tree Source
|
|
*
|
|
* Copyright 2010,2012 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/include/ "fsl/p1021si-pre.dtsi"
|
|
/ {
|
|
model = "fsl,P1021";
|
|
compatible = "fsl,P1021MDS";
|
|
|
|
aliases {
|
|
ethernet3 = &enet3;
|
|
ethernet4 = &enet4;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
lbc: localbus@ffe05000 {
|
|
reg = <0x0 0xffe05000 0x0 0x1000>;
|
|
|
|
/* NAND Flash, BCSR, PMC0/1*/
|
|
ranges = <0x0 0x0 0x0 0xfc000000 0x02000000
|
|
0x1 0x0 0x0 0xf8000000 0x00008000
|
|
0x2 0x0 0x0 0xf8010000 0x00020000
|
|
0x3 0x0 0x0 0xf8020000 0x00020000>;
|
|
|
|
nand@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1021-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <0x0 0x0 0x40000>;
|
|
|
|
partition@0 {
|
|
/* This location must not be altered */
|
|
/* 1MB for u-boot Bootloader Image */
|
|
reg = <0x0 0x00100000>;
|
|
label = "NAND (RO) U-Boot Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@100000 {
|
|
/* 1MB for DTB Image */
|
|
reg = <0x00100000 0x00100000>;
|
|
label = "NAND (RO) DTB Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@200000 {
|
|
/* 4MB for Linux Kernel Image */
|
|
reg = <0x00200000 0x00400000>;
|
|
label = "NAND (RO) Linux Kernel Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@600000 {
|
|
/* 5MB for Compressed Root file System Image */
|
|
reg = <0x00600000 0x00500000>;
|
|
label = "NAND (RO) Compressed RFS Image";
|
|
read-only;
|
|
};
|
|
|
|
partition@b00000 {
|
|
/* 6MB for JFFS2 based Root file System */
|
|
reg = <0x00a00000 0x00600000>;
|
|
label = "NAND (RW) JFFS2 Root File System";
|
|
};
|
|
|
|
partition@1100000 {
|
|
/* 14MB for JFFS2 based Root file System */
|
|
reg = <0x01100000 0x00e00000>;
|
|
label = "NAND (RW) Writable User area";
|
|
};
|
|
|
|
partition@1f00000 {
|
|
/* 1MB for microcode */
|
|
reg = <0x01f00000 0x00100000>;
|
|
label = "NAND (RO) QE Ucode";
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
bcsr@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,p1021mds-bcsr";
|
|
reg = <1 0 0x8000>;
|
|
ranges = <0 1 0 0x8000>;
|
|
};
|
|
|
|
pib@2,0 {
|
|
compatible = "fsl,p1021mds-pib";
|
|
reg = <2 0 0x10000>;
|
|
};
|
|
|
|
pib@3,0 {
|
|
compatible = "fsl,p1021mds-pib";
|
|
reg = <3 0 0x10000>;
|
|
};
|
|
};
|
|
|
|
soc: soc@ffe00000 {
|
|
compatible = "fsl,p1021-immr", "simple-bus";
|
|
ranges = <0x0 0x0 0xffe00000 0x100000>;
|
|
|
|
i2c@3000 {
|
|
rtc@68 {
|
|
compatible = "dallas,ds1374";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
spi@7000 {
|
|
|
|
flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "spansion,s25sl12801";
|
|
reg = <0>;
|
|
spi-max-frequency = <40000000>; /* input clock */
|
|
|
|
partition@u-boot {
|
|
label = "u-boot-spi";
|
|
reg = <0x00000000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@kernel {
|
|
label = "kernel-spi";
|
|
reg = <0x00100000 0x00500000>;
|
|
read-only;
|
|
};
|
|
partition@dtb {
|
|
label = "dtb-spi";
|
|
reg = <0x00600000 0x00100000>;
|
|
read-only;
|
|
};
|
|
partition@fs {
|
|
label = "file system-spi";
|
|
reg = <0x00700000 0x00900000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
usb@22000 {
|
|
phy_type = "ulpi";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
mdio@24000 {
|
|
phy0: ethernet-phy@0 {
|
|
interrupts = <1 1 0 0>;
|
|
reg = <0x0>;
|
|
};
|
|
phy1: ethernet-phy@1 {
|
|
interrupts = <2 1 0 0>;
|
|
reg = <0x1>;
|
|
};
|
|
phy4: ethernet-phy@4 {
|
|
reg = <0x4>;
|
|
};
|
|
tbi-phy@5 {
|
|
device_type = "tbi-phy";
|
|
reg = <0x5>;
|
|
};
|
|
};
|
|
|
|
mdio@25000 {
|
|
tbi0: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
ethernet@b0000 {
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
ethernet@b1000 {
|
|
phy-handle = <&phy4>;
|
|
tbi-handle = <&tbi0>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
ethernet@b2000 {
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
par_io@e0100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0xe0100 0x60>;
|
|
ranges = <0x0 0xe0100 0x60>;
|
|
device_type = "par_io";
|
|
num-ports = <3>;
|
|
pio1: ucc_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
|
|
0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */
|
|
0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */
|
|
0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */
|
|
0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */
|
|
0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */
|
|
0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
|
|
0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */
|
|
0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */
|
|
0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
|
|
0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
|
|
0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
|
|
0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */
|
|
0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */
|
|
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */
|
|
0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */
|
|
0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */
|
|
};
|
|
|
|
pio2: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */
|
|
0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */
|
|
0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */
|
|
0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */
|
|
0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */
|
|
0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */
|
|
0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */
|
|
0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */
|
|
0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */
|
|
};
|
|
};
|
|
};
|
|
|
|
pci0: pcie@ffe09000 {
|
|
reg = <0 0xffe09000 0 0x1000>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
pci1: pcie@ffe0a000 {
|
|
reg = <0 0xffe0a000 0 0x1000>;
|
|
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
|
|
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0xc0000000
|
|
0x2000000 0x0 0xc0000000
|
|
0x0 0x20000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
qe: qe@ffe80000 {
|
|
ranges = <0x0 0x0 0xffe80000 0x40000>;
|
|
reg = <0 0xffe80000 0 0x480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <0>;
|
|
status = "disabled"; /* no firmware loaded */
|
|
|
|
enet3: ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "clk12";
|
|
tx-clock-name = "clk9";
|
|
pio-handle = <&pio1>;
|
|
phy-handle = <&qe_phy0>;
|
|
phy-connection-type = "mii";
|
|
};
|
|
|
|
mdio@2120 {
|
|
qe_phy0: ethernet-phy@0 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <4 1 0 0>;
|
|
reg = <0x0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
qe_phy1: ethernet-phy@03 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <5 1 0 0>;
|
|
reg = <0x3>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet4: ucc@2400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk13";
|
|
pio-handle = <&pio2>;
|
|
phy-handle = <&qe_phy1>;
|
|
phy-connection-type = "rmii";
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "fsl/p1021si-post.dtsi"
|