mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
d64420e816
Rockchip SoCs use 2 different numbering schemes. Where the gpio- controllers just count 0-31 for their 32 gpios, the underlying iomux controller splits these into 4 separate entities A-D. Device-schematics always use these iomux-values to identify pins, so to make mapping schematics to devicetree easier Andy Yan introduced named constants for the pins but so far we only used them on new additions. Using a sed-script created by Emil Renner Berthing bulk-convert the remaining raw gpio numbers into their descriptive counterparts and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x mappings: /rockchip,pins *=/bcheck b # to end of script :append-next-line N :check /^[^;]*$/bappend-next-line s/<RK_GPIO\([0-9]\) /<\1 /g s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g Suggested-by: Emil Renner Berthing <esmil@mailme.dk> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> Acked-by: Robin Murphy <robin.murphy@arm.com>
403 lines
8.1 KiB
Plaintext
403 lines
8.1 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Google Gru-Chromebook shared properties
|
|
*
|
|
* Copyright 2018 Google, Inc
|
|
*/
|
|
|
|
#include "rk3399-gru.dtsi"
|
|
|
|
/ {
|
|
pp900_ap: pp900-ap {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp900_ap";
|
|
|
|
/* EC turns on w/ pp900_ap_en; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
/* EC turns on w/ pp900_usb_en */
|
|
pp900_usb: pp900-ap {
|
|
};
|
|
|
|
/* EC turns on w/ pp900_pcie_en */
|
|
pp900_pcie: pp900-ap {
|
|
};
|
|
|
|
pp3000: pp3000 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3000";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pp3000_en>;
|
|
|
|
enable-active-high;
|
|
gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
|
|
compatible = "pwm-regulator";
|
|
regulator-name = "ppvar_centerlogic_pwm";
|
|
|
|
pwms = <&pwm3 0 3337 0>;
|
|
pwm-supply = <&ppvar_sys>;
|
|
pwm-dutycycle-range = <100 0>;
|
|
pwm-dutycycle-unit = <100>;
|
|
|
|
/* EC turns on w/ ppvar_centerlogic_en; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <799434>;
|
|
regulator-max-microvolt = <1049925>;
|
|
};
|
|
|
|
ppvar_centerlogic: ppvar-centerlogic {
|
|
compatible = "vctrl-regulator";
|
|
regulator-name = "ppvar_centerlogic";
|
|
|
|
regulator-min-microvolt = <799434>;
|
|
regulator-max-microvolt = <1049925>;
|
|
|
|
ctrl-supply = <&ppvar_centerlogic_pwm>;
|
|
ctrl-voltage-range = <799434 1049925>;
|
|
|
|
regulator-settling-time-up-us = <378>;
|
|
min-slew-down-rate = <225>;
|
|
ovp-threshold-percent = <16>;
|
|
};
|
|
|
|
/* Schematics call this PPVAR even though it's fixed */
|
|
ppvar_logic: ppvar-logic {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "ppvar_logic";
|
|
|
|
/* EC turns on w/ ppvar_logic_en; always on for AP */
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
vin-supply = <&ppvar_sys>;
|
|
};
|
|
|
|
pp1800_audio: pp1800-audio {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp1800_audio";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pp1800_audio_en>;
|
|
|
|
enable-active-high;
|
|
gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
vin-supply = <&pp1800>;
|
|
};
|
|
|
|
/* gpio is shared with pp3300_wifi_bt */
|
|
pp1800_pcie: pp1800-pcie {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp1800_pcie";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_module_pd_l>;
|
|
|
|
enable-active-high;
|
|
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
|
|
|
/*
|
|
* Need to wait 1ms + ramp-up time before we can power on WiFi.
|
|
* This has been approximated as 8ms total.
|
|
*/
|
|
regulator-enable-ramp-delay = <8000>;
|
|
|
|
vin-supply = <&pp1800>;
|
|
};
|
|
|
|
/* Always on; plain and simple */
|
|
pp3000_ap: pp3000_emmc: pp3000 {
|
|
};
|
|
|
|
pp1500_ap_io: pp1500-ap-io {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp1500_ap_io";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pp1500_en>;
|
|
|
|
enable-active-high;
|
|
gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
|
|
vin-supply = <&pp1800>;
|
|
};
|
|
|
|
pp3300_disp: pp3300-disp {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_disp";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pp3300_disp_en>;
|
|
|
|
enable-active-high;
|
|
gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
|
|
|
|
startup-delay-us = <2000>;
|
|
vin-supply = <&pp3300>;
|
|
};
|
|
|
|
/* EC turns on w/ pp3300_usb_en_l */
|
|
pp3300_usb: pp3300 {
|
|
};
|
|
|
|
/* gpio is shared with pp1800_pcie and pinctrl is set there */
|
|
pp3300_wifi_bt: pp3300-wifi-bt {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "pp3300_wifi_bt";
|
|
|
|
enable-active-high;
|
|
gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
|
|
|
|
vin-supply = <&pp3300>;
|
|
};
|
|
|
|
/*
|
|
* This is a bit of a hack. The WiFi module should be reset at least
|
|
* 1ms after its regulators have ramped up (max rampup time is ~7ms).
|
|
* With some stretching of the imagination, we can call the 1.8V
|
|
* regulator a supply.
|
|
*/
|
|
wlan_pd_n: wlan-pd-n {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "wlan_pd_n";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_module_reset_l>;
|
|
|
|
enable-active-high;
|
|
gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
|
|
|
vin-supply = <&pp1800_pcie>;
|
|
};
|
|
|
|
backlight: backlight {
|
|
compatible = "pwm-backlight";
|
|
enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
|
|
power-supply = <&pp3300_disp>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bl_en>;
|
|
pwm-delay-us = <10000>;
|
|
};
|
|
|
|
gpio_keys: gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_host_wake_l>;
|
|
|
|
wake_on_bt: wake-on-bt {
|
|
label = "Wake-on-Bluetooth";
|
|
gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
|
|
linux,code = <KEY_WAKEUP>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
};
|
|
|
|
&ppvar_bigcpu {
|
|
min-slew-down-rate = <225>;
|
|
ovp-threshold-percent = <16>;
|
|
};
|
|
|
|
&ppvar_litcpu {
|
|
min-slew-down-rate = <225>;
|
|
ovp-threshold-percent = <16>;
|
|
};
|
|
|
|
&ppvar_gpu {
|
|
min-slew-down-rate = <225>;
|
|
ovp-threshold-percent = <16>;
|
|
};
|
|
|
|
&cdn_dp {
|
|
extcon = <&usbc_extcon0>, <&usbc_extcon1>;
|
|
};
|
|
|
|
&edp {
|
|
status = "okay";
|
|
|
|
ports {
|
|
edp_out: port@1 {
|
|
reg = <1>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
edp_out_panel: endpoint@0 {
|
|
reg = <0>;
|
|
remote-endpoint = <&panel_in_edp>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ap_i2c_mic: &i2c1 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
/* These are relatively safe rise/fall times */
|
|
i2c-scl-falling-time-ns = <50>;
|
|
i2c-scl-rising-time-ns = <300>;
|
|
|
|
headsetcodec: rt5514@57 {
|
|
compatible = "realtek,rt5514";
|
|
reg = <0x57>;
|
|
realtek,dmic-init-delay-ms = <20>;
|
|
};
|
|
};
|
|
|
|
ap_i2c_tp: &i2c5 {
|
|
status = "okay";
|
|
|
|
clock-frequency = <400000>;
|
|
|
|
/* These are relatively safe rise/fall times */
|
|
i2c-scl-falling-time-ns = <50>;
|
|
i2c-scl-rising-time-ns = <300>;
|
|
|
|
/*
|
|
* Note strange pullup enable. Apparently this avoids leakage but
|
|
* still allows us to get nice 4.7K pullups for high speed i2c
|
|
* transfers. Basically we want the pullup on whenever the ap is
|
|
* alive, so the "en" pin just gets set to output high.
|
|
*/
|
|
pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
|
|
};
|
|
|
|
&cros_ec {
|
|
cros_ec_pwm: ec-pwm {
|
|
compatible = "google,cros-ec-pwm";
|
|
#pwm-cells = <1>;
|
|
};
|
|
|
|
usbc_extcon1: extcon@1 {
|
|
compatible = "google,extcon-usbc-cros-ec";
|
|
google,usb-port-id = <1>;
|
|
|
|
#extcon-cells = <0>;
|
|
};
|
|
};
|
|
|
|
&sound {
|
|
rockchip,codec = <&max98357a &headsetcodec
|
|
&codec &wacky_spi_audio &cdn_dp>;
|
|
};
|
|
|
|
&spi2 {
|
|
wacky_spi_audio: spi2@0 {
|
|
compatible = "realtek,rt5514";
|
|
reg = <0>;
|
|
interrupt-parent = <&gpio1>;
|
|
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mic_int>;
|
|
/* May run faster once verified. */
|
|
spi-max-frequency = <10000000>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&pci_rootport {
|
|
mvl_wifi: wifi@0,0 {
|
|
compatible = "pci1b4b,2b42";
|
|
reg = <0x83010000 0x0 0x00000000 0x0 0x00100000
|
|
0x83010000 0x0 0x00100000 0x0 0x00100000>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_host_wake_l>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
&tcphy1 {
|
|
status = "okay";
|
|
extcon = <&usbc_extcon1>;
|
|
};
|
|
|
|
&u2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbdrd3_1 {
|
|
status = "okay";
|
|
extcon = <&usbc_extcon1>;
|
|
};
|
|
|
|
&usbdrd_dwc3_1 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&pinctrl {
|
|
discrete-regulators {
|
|
pp1500_en: pp1500-en {
|
|
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
|
|
&pcfg_pull_none>;
|
|
};
|
|
|
|
pp1800_audio_en: pp1800-audio-en {
|
|
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
|
|
&pcfg_pull_down>;
|
|
};
|
|
|
|
pp3000_en: pp3000-en {
|
|
rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
|
|
&pcfg_pull_none>;
|
|
};
|
|
|
|
pp3300_disp_en: pp3300-disp-en {
|
|
rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
|
|
&pcfg_pull_none>;
|
|
};
|
|
|
|
wlan_module_pd_l: wlan-module-pd-l {
|
|
rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
|
|
&pcfg_pull_down>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&wifi {
|
|
wifi_perst_l: wifi-perst-l {
|
|
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
|
|
wlan_host_wake_l: wlan-host-wake-l {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|