mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 17:45:09 +07:00
5d298baa41
Commit24be85a23d
("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug") clears the PECE1 bit of the LPCR via stop-api during CPU-Hotplug to prevent wakeup due to a decrementer on an offlined CPU which is in a deep stop state. In the case where the stop-api support is found to be lacking, the commit785a12afdb
("powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails") disables deep states that lose hypervisor context. Thus in this case, the offlined CPU will be put to some shallow idle state. However, we currently unconditionally clear the PECE1 in LPCR via stop-api during CPU-Hotplug even when deep states are disabled due to stop-api failure. Fix this by clearing PECE1 of LPCR via stop-api during CPU-Hotplug *only* when the offlined CPU will be put to a deep state that loses hypervisor context. Fixes:24be85a23d
("powerpc/powernv: Clear PECE1 in LPCR via stop-api only on Hotplug") Reported-by: Pavithra Prakash <pavirampu@linux.vnet.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Tested-by: Pavithra Prakash <pavrampu@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
764 lines
20 KiB
C
764 lines
20 KiB
C
/*
|
|
* PowerNV cpuidle code
|
|
*
|
|
* Copyright 2015 IBM Corp.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/of.h>
|
|
#include <linux/device.h>
|
|
#include <linux/cpu.h>
|
|
|
|
#include <asm/firmware.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/opal.h>
|
|
#include <asm/cputhreads.h>
|
|
#include <asm/cpuidle.h>
|
|
#include <asm/code-patching.h>
|
|
#include <asm/smp.h>
|
|
#include <asm/runlatch.h>
|
|
|
|
#include "powernv.h"
|
|
#include "subcore.h"
|
|
|
|
/* Power ISA 3.0 allows for stop states 0x0 - 0xF */
|
|
#define MAX_STOP_STATE 0xF
|
|
|
|
#define P9_STOP_SPR_MSR 2000
|
|
#define P9_STOP_SPR_PSSCR 855
|
|
|
|
static u32 supported_cpuidle_states;
|
|
|
|
/*
|
|
* The default stop state that will be used by ppc_md.power_save
|
|
* function on platforms that support stop instruction.
|
|
*/
|
|
static u64 pnv_default_stop_val;
|
|
static u64 pnv_default_stop_mask;
|
|
static bool default_stop_found;
|
|
|
|
/*
|
|
* First deep stop state. Used to figure out when to save/restore
|
|
* hypervisor context.
|
|
*/
|
|
u64 pnv_first_deep_stop_state = MAX_STOP_STATE;
|
|
|
|
/*
|
|
* psscr value and mask of the deepest stop idle state.
|
|
* Used when a cpu is offlined.
|
|
*/
|
|
static u64 pnv_deepest_stop_psscr_val;
|
|
static u64 pnv_deepest_stop_psscr_mask;
|
|
static u64 pnv_deepest_stop_flag;
|
|
static bool deepest_stop_found;
|
|
|
|
static int pnv_save_sprs_for_deep_states(void)
|
|
{
|
|
int cpu;
|
|
int rc;
|
|
|
|
/*
|
|
* hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric across
|
|
* all cpus at boot. Get these reg values of current cpu and use the
|
|
* same across all cpus.
|
|
*/
|
|
uint64_t lpcr_val = mfspr(SPRN_LPCR);
|
|
uint64_t hid0_val = mfspr(SPRN_HID0);
|
|
uint64_t hid1_val = mfspr(SPRN_HID1);
|
|
uint64_t hid4_val = mfspr(SPRN_HID4);
|
|
uint64_t hid5_val = mfspr(SPRN_HID5);
|
|
uint64_t hmeer_val = mfspr(SPRN_HMEER);
|
|
uint64_t msr_val = MSR_IDLE;
|
|
uint64_t psscr_val = pnv_deepest_stop_psscr_val;
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
uint64_t pir = get_hard_smp_processor_id(cpu);
|
|
uint64_t hsprg0_val = (uint64_t)&paca[cpu];
|
|
|
|
rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
|
|
rc = opal_slw_set_reg(pir, P9_STOP_SPR_MSR, msr_val);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = opal_slw_set_reg(pir,
|
|
P9_STOP_SPR_PSSCR, psscr_val);
|
|
|
|
if (rc)
|
|
return rc;
|
|
}
|
|
|
|
/* HIDs are per core registers */
|
|
if (cpu_thread_in_core(cpu) == 0) {
|
|
|
|
rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
/* Only p8 needs to set extra HID regiters */
|
|
if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
|
|
|
|
rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
|
|
if (rc != 0)
|
|
return rc;
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pnv_alloc_idle_core_states(void)
|
|
{
|
|
int i, j;
|
|
int nr_cores = cpu_nr_cores();
|
|
u32 *core_idle_state;
|
|
|
|
/*
|
|
* core_idle_state - The lower 8 bits track the idle state of
|
|
* each thread of the core.
|
|
*
|
|
* The most significant bit is the lock bit.
|
|
*
|
|
* Initially all the bits corresponding to threads_per_core
|
|
* are set. They are cleared when the thread enters deep idle
|
|
* state like sleep and winkle/stop.
|
|
*
|
|
* Initially the lock bit is cleared. The lock bit has 2
|
|
* purposes:
|
|
* a. While the first thread in the core waking up from
|
|
* idle is restoring core state, it prevents other
|
|
* threads in the core from switching to process
|
|
* context.
|
|
* b. While the last thread in the core is saving the
|
|
* core state, it prevents a different thread from
|
|
* waking up.
|
|
*/
|
|
for (i = 0; i < nr_cores; i++) {
|
|
int first_cpu = i * threads_per_core;
|
|
int node = cpu_to_node(first_cpu);
|
|
size_t paca_ptr_array_size;
|
|
|
|
core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node);
|
|
*core_idle_state = (1 << threads_per_core) - 1;
|
|
paca_ptr_array_size = (threads_per_core *
|
|
sizeof(struct paca_struct *));
|
|
|
|
for (j = 0; j < threads_per_core; j++) {
|
|
int cpu = first_cpu + j;
|
|
|
|
paca[cpu].core_idle_state_ptr = core_idle_state;
|
|
paca[cpu].thread_idle_state = PNV_THREAD_RUNNING;
|
|
paca[cpu].thread_mask = 1 << j;
|
|
if (!cpu_has_feature(CPU_FTR_POWER9_DD1))
|
|
continue;
|
|
paca[cpu].thread_sibling_pacas =
|
|
kmalloc_node(paca_ptr_array_size,
|
|
GFP_KERNEL, node);
|
|
}
|
|
}
|
|
|
|
update_subcore_sibling_mask();
|
|
|
|
if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT) {
|
|
int rc = pnv_save_sprs_for_deep_states();
|
|
|
|
if (likely(!rc))
|
|
return;
|
|
|
|
/*
|
|
* The stop-api is unable to restore hypervisor
|
|
* resources on wakeup from platform idle states which
|
|
* lose full context. So disable such states.
|
|
*/
|
|
supported_cpuidle_states &= ~OPAL_PM_LOSE_FULL_CONTEXT;
|
|
pr_warn("cpuidle-powernv: Disabling idle states that lose full context\n");
|
|
pr_warn("cpuidle-powernv: Idle power-savings, CPU-Hotplug affected\n");
|
|
|
|
if (cpu_has_feature(CPU_FTR_ARCH_300) &&
|
|
(pnv_deepest_stop_flag & OPAL_PM_LOSE_FULL_CONTEXT)) {
|
|
/*
|
|
* Use the default stop state for CPU-Hotplug
|
|
* if available.
|
|
*/
|
|
if (default_stop_found) {
|
|
pnv_deepest_stop_psscr_val =
|
|
pnv_default_stop_val;
|
|
pnv_deepest_stop_psscr_mask =
|
|
pnv_default_stop_mask;
|
|
pr_warn("cpuidle-powernv: Offlined CPUs will stop with psscr = 0x%016llx\n",
|
|
pnv_deepest_stop_psscr_val);
|
|
} else { /* Fallback to snooze loop for CPU-Hotplug */
|
|
deepest_stop_found = false;
|
|
pr_warn("cpuidle-powernv: Offlined CPUs will busy wait\n");
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
u32 pnv_get_supported_cpuidle_states(void)
|
|
{
|
|
return supported_cpuidle_states;
|
|
}
|
|
EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states);
|
|
|
|
static void pnv_fastsleep_workaround_apply(void *info)
|
|
|
|
{
|
|
int rc;
|
|
int *err = info;
|
|
|
|
rc = opal_config_cpu_idle_state(OPAL_CONFIG_IDLE_FASTSLEEP,
|
|
OPAL_CONFIG_IDLE_APPLY);
|
|
if (rc)
|
|
*err = 1;
|
|
}
|
|
|
|
/*
|
|
* Used to store fastsleep workaround state
|
|
* 0 - Workaround applied/undone at fastsleep entry/exit path (Default)
|
|
* 1 - Workaround applied once, never undone.
|
|
*/
|
|
static u8 fastsleep_workaround_applyonce;
|
|
|
|
static ssize_t show_fastsleep_workaround_applyonce(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n", fastsleep_workaround_applyonce);
|
|
}
|
|
|
|
static ssize_t store_fastsleep_workaround_applyonce(struct device *dev,
|
|
struct device_attribute *attr, const char *buf,
|
|
size_t count)
|
|
{
|
|
cpumask_t primary_thread_mask;
|
|
int err;
|
|
u8 val;
|
|
|
|
if (kstrtou8(buf, 0, &val) || val != 1)
|
|
return -EINVAL;
|
|
|
|
if (fastsleep_workaround_applyonce == 1)
|
|
return count;
|
|
|
|
/*
|
|
* fastsleep_workaround_applyonce = 1 implies
|
|
* fastsleep workaround needs to be left in 'applied' state on all
|
|
* the cores. Do this by-
|
|
* 1. Patching out the call to 'undo' workaround in fastsleep exit path
|
|
* 2. Sending ipi to all the cores which have at least one online thread
|
|
* 3. Patching out the call to 'apply' workaround in fastsleep entry
|
|
* path
|
|
* There is no need to send ipi to cores which have all threads
|
|
* offlined, as last thread of the core entering fastsleep or deeper
|
|
* state would have applied workaround.
|
|
*/
|
|
err = patch_instruction(
|
|
(unsigned int *)pnv_fastsleep_workaround_at_exit,
|
|
PPC_INST_NOP);
|
|
if (err) {
|
|
pr_err("fastsleep_workaround_applyonce change failed while patching pnv_fastsleep_workaround_at_exit");
|
|
goto fail;
|
|
}
|
|
|
|
get_online_cpus();
|
|
primary_thread_mask = cpu_online_cores_map();
|
|
on_each_cpu_mask(&primary_thread_mask,
|
|
pnv_fastsleep_workaround_apply,
|
|
&err, 1);
|
|
put_online_cpus();
|
|
if (err) {
|
|
pr_err("fastsleep_workaround_applyonce change failed while running pnv_fastsleep_workaround_apply");
|
|
goto fail;
|
|
}
|
|
|
|
err = patch_instruction(
|
|
(unsigned int *)pnv_fastsleep_workaround_at_entry,
|
|
PPC_INST_NOP);
|
|
if (err) {
|
|
pr_err("fastsleep_workaround_applyonce change failed while patching pnv_fastsleep_workaround_at_entry");
|
|
goto fail;
|
|
}
|
|
|
|
fastsleep_workaround_applyonce = 1;
|
|
|
|
return count;
|
|
fail:
|
|
return -EIO;
|
|
}
|
|
|
|
static DEVICE_ATTR(fastsleep_workaround_applyonce, 0600,
|
|
show_fastsleep_workaround_applyonce,
|
|
store_fastsleep_workaround_applyonce);
|
|
|
|
static unsigned long __power7_idle_type(unsigned long type)
|
|
{
|
|
unsigned long srr1;
|
|
|
|
if (!prep_irq_for_idle_irqsoff())
|
|
return 0;
|
|
|
|
__ppc64_runlatch_off();
|
|
srr1 = power7_idle_insn(type);
|
|
__ppc64_runlatch_on();
|
|
|
|
fini_irq_for_idle_irqsoff();
|
|
|
|
return srr1;
|
|
}
|
|
|
|
void power7_idle_type(unsigned long type)
|
|
{
|
|
unsigned long srr1;
|
|
|
|
srr1 = __power7_idle_type(type);
|
|
irq_set_pending_from_srr1(srr1);
|
|
}
|
|
|
|
void power7_idle(void)
|
|
{
|
|
if (!powersave_nap)
|
|
return;
|
|
|
|
power7_idle_type(PNV_THREAD_NAP);
|
|
}
|
|
|
|
static unsigned long __power9_idle_type(unsigned long stop_psscr_val,
|
|
unsigned long stop_psscr_mask)
|
|
{
|
|
unsigned long psscr;
|
|
unsigned long srr1;
|
|
|
|
if (!prep_irq_for_idle_irqsoff())
|
|
return 0;
|
|
|
|
psscr = mfspr(SPRN_PSSCR);
|
|
psscr = (psscr & ~stop_psscr_mask) | stop_psscr_val;
|
|
|
|
__ppc64_runlatch_off();
|
|
srr1 = power9_idle_stop(psscr);
|
|
__ppc64_runlatch_on();
|
|
|
|
fini_irq_for_idle_irqsoff();
|
|
|
|
return srr1;
|
|
}
|
|
|
|
void power9_idle_type(unsigned long stop_psscr_val,
|
|
unsigned long stop_psscr_mask)
|
|
{
|
|
unsigned long srr1;
|
|
|
|
srr1 = __power9_idle_type(stop_psscr_val, stop_psscr_mask);
|
|
irq_set_pending_from_srr1(srr1);
|
|
}
|
|
|
|
/*
|
|
* Used for ppc_md.power_save which needs a function with no parameters
|
|
*/
|
|
void power9_idle(void)
|
|
{
|
|
power9_idle_type(pnv_default_stop_val, pnv_default_stop_mask);
|
|
}
|
|
|
|
#ifdef CONFIG_HOTPLUG_CPU
|
|
static void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val)
|
|
{
|
|
u64 pir = get_hard_smp_processor_id(cpu);
|
|
|
|
mtspr(SPRN_LPCR, lpcr_val);
|
|
|
|
/*
|
|
* Program the LPCR via stop-api only if the deepest stop state
|
|
* can lose hypervisor context.
|
|
*/
|
|
if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT)
|
|
opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
|
|
}
|
|
|
|
/*
|
|
* pnv_cpu_offline: A function that puts the CPU into the deepest
|
|
* available platform idle state on a CPU-Offline.
|
|
* interrupts hard disabled and no lazy irq pending.
|
|
*/
|
|
unsigned long pnv_cpu_offline(unsigned int cpu)
|
|
{
|
|
unsigned long srr1;
|
|
u32 idle_states = pnv_get_supported_cpuidle_states();
|
|
u64 lpcr_val;
|
|
|
|
/*
|
|
* We don't want to take decrementer interrupts while we are
|
|
* offline, so clear LPCR:PECE1. We keep PECE2 (and
|
|
* LPCR_PECE_HVEE on P9) enabled as to let IPIs in.
|
|
*
|
|
* If the CPU gets woken up by a special wakeup, ensure that
|
|
* the SLW engine sets LPCR with decrementer bit cleared, else
|
|
* the CPU will come back to the kernel due to a spurious
|
|
* wakeup.
|
|
*/
|
|
lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
|
|
pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
|
|
|
|
__ppc64_runlatch_off();
|
|
|
|
if (cpu_has_feature(CPU_FTR_ARCH_300) && deepest_stop_found) {
|
|
unsigned long psscr;
|
|
|
|
psscr = mfspr(SPRN_PSSCR);
|
|
psscr = (psscr & ~pnv_deepest_stop_psscr_mask) |
|
|
pnv_deepest_stop_psscr_val;
|
|
srr1 = power9_idle_stop(psscr);
|
|
|
|
} else if ((idle_states & OPAL_PM_WINKLE_ENABLED) &&
|
|
(idle_states & OPAL_PM_LOSE_FULL_CONTEXT)) {
|
|
srr1 = power7_idle_insn(PNV_THREAD_WINKLE);
|
|
} else if ((idle_states & OPAL_PM_SLEEP_ENABLED) ||
|
|
(idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
|
|
srr1 = power7_idle_insn(PNV_THREAD_SLEEP);
|
|
} else if (idle_states & OPAL_PM_NAP_ENABLED) {
|
|
srr1 = power7_idle_insn(PNV_THREAD_NAP);
|
|
} else {
|
|
/* This is the fallback method. We emulate snooze */
|
|
while (!generic_check_cpu_restart(cpu)) {
|
|
HMT_low();
|
|
HMT_very_low();
|
|
}
|
|
srr1 = 0;
|
|
HMT_medium();
|
|
}
|
|
|
|
__ppc64_runlatch_on();
|
|
|
|
/*
|
|
* Re-enable decrementer interrupts in LPCR.
|
|
*
|
|
* Further, we want stop states to be woken up by decrementer
|
|
* for non-hotplug cases. So program the LPCR via stop api as
|
|
* well.
|
|
*/
|
|
lpcr_val = mfspr(SPRN_LPCR) | (u64)LPCR_PECE1;
|
|
pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
|
|
|
|
return srr1;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Power ISA 3.0 idle initialization.
|
|
*
|
|
* POWER ISA 3.0 defines a new SPR Processor stop Status and Control
|
|
* Register (PSSCR) to control idle behavior.
|
|
*
|
|
* PSSCR layout:
|
|
* ----------------------------------------------------------
|
|
* | PLS | /// | SD | ESL | EC | PSLL | /// | TR | MTL | RL |
|
|
* ----------------------------------------------------------
|
|
* 0 4 41 42 43 44 48 54 56 60
|
|
*
|
|
* PSSCR key fields:
|
|
* Bits 0:3 - Power-Saving Level Status (PLS). This field indicates the
|
|
* lowest power-saving state the thread entered since stop instruction was
|
|
* last executed.
|
|
*
|
|
* Bit 41 - Status Disable(SD)
|
|
* 0 - Shows PLS entries
|
|
* 1 - PLS entries are all 0
|
|
*
|
|
* Bit 42 - Enable State Loss
|
|
* 0 - No state is lost irrespective of other fields
|
|
* 1 - Allows state loss
|
|
*
|
|
* Bit 43 - Exit Criterion
|
|
* 0 - Exit from power-save mode on any interrupt
|
|
* 1 - Exit from power-save mode controlled by LPCR's PECE bits
|
|
*
|
|
* Bits 44:47 - Power-Saving Level Limit
|
|
* This limits the power-saving level that can be entered into.
|
|
*
|
|
* Bits 60:63 - Requested Level
|
|
* Used to specify which power-saving level must be entered on executing
|
|
* stop instruction
|
|
*/
|
|
|
|
int validate_psscr_val_mask(u64 *psscr_val, u64 *psscr_mask, u32 flags)
|
|
{
|
|
int err = 0;
|
|
|
|
/*
|
|
* psscr_mask == 0xf indicates an older firmware.
|
|
* Set remaining fields of psscr to the default values.
|
|
* See NOTE above definition of PSSCR_HV_DEFAULT_VAL
|
|
*/
|
|
if (*psscr_mask == 0xf) {
|
|
*psscr_val = *psscr_val | PSSCR_HV_DEFAULT_VAL;
|
|
*psscr_mask = PSSCR_HV_DEFAULT_MASK;
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* New firmware is expected to set the psscr_val bits correctly.
|
|
* Validate that the following invariants are correctly maintained by
|
|
* the new firmware.
|
|
* - ESL bit value matches the EC bit value.
|
|
* - ESL bit is set for all the deep stop states.
|
|
*/
|
|
if (GET_PSSCR_ESL(*psscr_val) != GET_PSSCR_EC(*psscr_val)) {
|
|
err = ERR_EC_ESL_MISMATCH;
|
|
} else if ((flags & OPAL_PM_LOSE_FULL_CONTEXT) &&
|
|
GET_PSSCR_ESL(*psscr_val) == 0) {
|
|
err = ERR_DEEP_STATE_ESL_MISMATCH;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* pnv_arch300_idle_init: Initializes the default idle state, first
|
|
* deep idle state and deepest idle state on
|
|
* ISA 3.0 CPUs.
|
|
*
|
|
* @np: /ibm,opal/power-mgt device node
|
|
* @flags: cpu-idle-state-flags array
|
|
* @dt_idle_states: Number of idle state entries
|
|
* Returns 0 on success
|
|
*/
|
|
static int __init pnv_power9_idle_init(struct device_node *np, u32 *flags,
|
|
int dt_idle_states)
|
|
{
|
|
u64 *psscr_val = NULL;
|
|
u64 *psscr_mask = NULL;
|
|
u32 *residency_ns = NULL;
|
|
u64 max_residency_ns = 0;
|
|
int rc = 0, i;
|
|
|
|
psscr_val = kcalloc(dt_idle_states, sizeof(*psscr_val), GFP_KERNEL);
|
|
psscr_mask = kcalloc(dt_idle_states, sizeof(*psscr_mask), GFP_KERNEL);
|
|
residency_ns = kcalloc(dt_idle_states, sizeof(*residency_ns),
|
|
GFP_KERNEL);
|
|
|
|
if (!psscr_val || !psscr_mask || !residency_ns) {
|
|
rc = -1;
|
|
goto out;
|
|
}
|
|
|
|
if (of_property_read_u64_array(np,
|
|
"ibm,cpu-idle-state-psscr",
|
|
psscr_val, dt_idle_states)) {
|
|
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr in DT\n");
|
|
rc = -1;
|
|
goto out;
|
|
}
|
|
|
|
if (of_property_read_u64_array(np,
|
|
"ibm,cpu-idle-state-psscr-mask",
|
|
psscr_mask, dt_idle_states)) {
|
|
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr-mask in DT\n");
|
|
rc = -1;
|
|
goto out;
|
|
}
|
|
|
|
if (of_property_read_u32_array(np,
|
|
"ibm,cpu-idle-state-residency-ns",
|
|
residency_ns, dt_idle_states)) {
|
|
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-residency-ns in DT\n");
|
|
rc = -1;
|
|
goto out;
|
|
}
|
|
|
|
/*
|
|
* Set pnv_first_deep_stop_state, pnv_deepest_stop_psscr_{val,mask},
|
|
* and the pnv_default_stop_{val,mask}.
|
|
*
|
|
* pnv_first_deep_stop_state should be set to the first stop
|
|
* level to cause hypervisor state loss.
|
|
*
|
|
* pnv_deepest_stop_{val,mask} should be set to values corresponding to
|
|
* the deepest stop state.
|
|
*
|
|
* pnv_default_stop_{val,mask} should be set to values corresponding to
|
|
* the shallowest (OPAL_PM_STOP_INST_FAST) loss-less stop state.
|
|
*/
|
|
pnv_first_deep_stop_state = MAX_STOP_STATE;
|
|
for (i = 0; i < dt_idle_states; i++) {
|
|
int err;
|
|
u64 psscr_rl = psscr_val[i] & PSSCR_RL_MASK;
|
|
|
|
if ((flags[i] & OPAL_PM_LOSE_FULL_CONTEXT) &&
|
|
(pnv_first_deep_stop_state > psscr_rl))
|
|
pnv_first_deep_stop_state = psscr_rl;
|
|
|
|
err = validate_psscr_val_mask(&psscr_val[i], &psscr_mask[i],
|
|
flags[i]);
|
|
if (err) {
|
|
report_invalid_psscr_val(psscr_val[i], err);
|
|
continue;
|
|
}
|
|
|
|
if (max_residency_ns < residency_ns[i]) {
|
|
max_residency_ns = residency_ns[i];
|
|
pnv_deepest_stop_psscr_val = psscr_val[i];
|
|
pnv_deepest_stop_psscr_mask = psscr_mask[i];
|
|
pnv_deepest_stop_flag = flags[i];
|
|
deepest_stop_found = true;
|
|
}
|
|
|
|
if (!default_stop_found &&
|
|
(flags[i] & OPAL_PM_STOP_INST_FAST)) {
|
|
pnv_default_stop_val = psscr_val[i];
|
|
pnv_default_stop_mask = psscr_mask[i];
|
|
default_stop_found = true;
|
|
}
|
|
}
|
|
|
|
if (unlikely(!default_stop_found)) {
|
|
pr_warn("cpuidle-powernv: No suitable default stop state found. Disabling platform idle.\n");
|
|
} else {
|
|
ppc_md.power_save = power9_idle;
|
|
pr_info("cpuidle-powernv: Default stop: psscr = 0x%016llx,mask=0x%016llx\n",
|
|
pnv_default_stop_val, pnv_default_stop_mask);
|
|
}
|
|
|
|
if (unlikely(!deepest_stop_found)) {
|
|
pr_warn("cpuidle-powernv: No suitable stop state for CPU-Hotplug. Offlined CPUs will busy wait");
|
|
} else {
|
|
pr_info("cpuidle-powernv: Deepest stop: psscr = 0x%016llx,mask=0x%016llx\n",
|
|
pnv_deepest_stop_psscr_val,
|
|
pnv_deepest_stop_psscr_mask);
|
|
}
|
|
|
|
pr_info("cpuidle-powernv: Requested Level (RL) value of first deep stop = 0x%llx\n",
|
|
pnv_first_deep_stop_state);
|
|
out:
|
|
kfree(psscr_val);
|
|
kfree(psscr_mask);
|
|
kfree(residency_ns);
|
|
return rc;
|
|
}
|
|
|
|
/*
|
|
* Probe device tree for supported idle states
|
|
*/
|
|
static void __init pnv_probe_idle_states(void)
|
|
{
|
|
struct device_node *np;
|
|
int dt_idle_states;
|
|
u32 *flags = NULL;
|
|
int i;
|
|
|
|
np = of_find_node_by_path("/ibm,opal/power-mgt");
|
|
if (!np) {
|
|
pr_warn("opal: PowerMgmt Node not found\n");
|
|
goto out;
|
|
}
|
|
dt_idle_states = of_property_count_u32_elems(np,
|
|
"ibm,cpu-idle-state-flags");
|
|
if (dt_idle_states < 0) {
|
|
pr_warn("cpuidle-powernv: no idle states found in the DT\n");
|
|
goto out;
|
|
}
|
|
|
|
flags = kcalloc(dt_idle_states, sizeof(*flags), GFP_KERNEL);
|
|
|
|
if (of_property_read_u32_array(np,
|
|
"ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
|
|
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
|
|
goto out;
|
|
}
|
|
|
|
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
|
|
if (pnv_power9_idle_init(np, flags, dt_idle_states))
|
|
goto out;
|
|
}
|
|
|
|
for (i = 0; i < dt_idle_states; i++)
|
|
supported_cpuidle_states |= flags[i];
|
|
|
|
out:
|
|
kfree(flags);
|
|
}
|
|
static int __init pnv_init_idle_states(void)
|
|
{
|
|
|
|
supported_cpuidle_states = 0;
|
|
|
|
if (cpuidle_disable != IDLE_NO_OVERRIDE)
|
|
goto out;
|
|
|
|
pnv_probe_idle_states();
|
|
|
|
if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
|
|
patch_instruction(
|
|
(unsigned int *)pnv_fastsleep_workaround_at_entry,
|
|
PPC_INST_NOP);
|
|
patch_instruction(
|
|
(unsigned int *)pnv_fastsleep_workaround_at_exit,
|
|
PPC_INST_NOP);
|
|
} else {
|
|
/*
|
|
* OPAL_PM_SLEEP_ENABLED_ER1 is set. It indicates that
|
|
* workaround is needed to use fastsleep. Provide sysfs
|
|
* control to choose how this workaround has to be applied.
|
|
*/
|
|
device_create_file(cpu_subsys.dev_root,
|
|
&dev_attr_fastsleep_workaround_applyonce);
|
|
}
|
|
|
|
pnv_alloc_idle_core_states();
|
|
|
|
/*
|
|
* For each CPU, record its PACA address in each of it's
|
|
* sibling thread's PACA at the slot corresponding to this
|
|
* CPU's index in the core.
|
|
*/
|
|
if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
|
|
int cpu;
|
|
|
|
pr_info("powernv: idle: Saving PACA pointers of all CPUs in their thread sibling PACA\n");
|
|
for_each_possible_cpu(cpu) {
|
|
int base_cpu = cpu_first_thread_sibling(cpu);
|
|
int idx = cpu_thread_in_core(cpu);
|
|
int i;
|
|
|
|
for (i = 0; i < threads_per_core; i++) {
|
|
int j = base_cpu + i;
|
|
|
|
paca[j].thread_sibling_pacas[idx] = &paca[cpu];
|
|
}
|
|
}
|
|
}
|
|
|
|
if (supported_cpuidle_states & OPAL_PM_NAP_ENABLED)
|
|
ppc_md.power_save = power7_idle;
|
|
|
|
out:
|
|
return 0;
|
|
}
|
|
machine_subsys_initcall(powernv, pnv_init_idle_states);
|