linux_dsm_epyc7002/arch/powerpc/platforms/powernv/idle.c

764 lines
20 KiB
C
Raw Normal View History

/*
* PowerNV cpuidle code
*
* Copyright 2015 IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/of.h>
powerpc/powernv: Introduce sysfs control for fastsleep workaround behavior Fastsleep is one of the idle state which cpuidle subsystem currently uses on power8 machines. In this state L2 cache is brought down to a threshold voltage. Therefore when the core is in fastsleep, the communication between L2 and L3 needs to be fenced. But there is a bug in the current power8 chips surrounding this fencing. OPAL provides a workaround which precludes the possibility of hitting this bug. But running with this workaround applied causes checkstop if any correctable error in L2 cache directory is detected. Hence OPAL also provides a way to undo the workaround. In the existing implementation, workaround is applied by the last thread of the core entering fastsleep and undone by the first thread waking up. But this has a performance cost. These OPAL calls account for roughly 4000 cycles everytime the core has to enter or wakeup from fastsleep. This patch introduces a sysfs attribute (fastsleep_workaround_applyonce) to choose the behavior of this workaround. By default, fastsleep_workaround_applyonce = 0. In this case, workaround is applied/undone everytime the core enters/exits fastsleep. fastsleep_workaround_applyonce = 1. In this case the workaround is applied once on all the cores and never undone. This can be triggered by echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce For simplicity this attribute can be modified only once. Implying, once fastsleep_workaround_applyonce is changed to 1, it cannot be reverted to the default state. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-20 12:02:58 +07:00
#include <linux/device.h>
#include <linux/cpu.h>
#include <asm/firmware.h>
#include <asm/machdep.h>
#include <asm/opal.h>
#include <asm/cputhreads.h>
#include <asm/cpuidle.h>
#include <asm/code-patching.h>
#include <asm/smp.h>
#include <asm/runlatch.h>
#include "powernv.h"
#include "subcore.h"
/* Power ISA 3.0 allows for stop states 0x0 - 0xF */
#define MAX_STOP_STATE 0xF
#define P9_STOP_SPR_MSR 2000
#define P9_STOP_SPR_PSSCR 855
static u32 supported_cpuidle_states;
/*
* The default stop state that will be used by ppc_md.power_save
* function on platforms that support stop instruction.
*/
static u64 pnv_default_stop_val;
static u64 pnv_default_stop_mask;
static bool default_stop_found;
/*
* First deep stop state. Used to figure out when to save/restore
* hypervisor context.
*/
u64 pnv_first_deep_stop_state = MAX_STOP_STATE;
/*
* psscr value and mask of the deepest stop idle state.
* Used when a cpu is offlined.
*/
static u64 pnv_deepest_stop_psscr_val;
static u64 pnv_deepest_stop_psscr_mask;
static u64 pnv_deepest_stop_flag;
static bool deepest_stop_found;
static int pnv_save_sprs_for_deep_states(void)
{
int cpu;
int rc;
/*
* hid0, hid1, hid4, hid5, hmeer and lpcr values are symmetric across
* all cpus at boot. Get these reg values of current cpu and use the
* same across all cpus.
*/
uint64_t lpcr_val = mfspr(SPRN_LPCR);
uint64_t hid0_val = mfspr(SPRN_HID0);
uint64_t hid1_val = mfspr(SPRN_HID1);
uint64_t hid4_val = mfspr(SPRN_HID4);
uint64_t hid5_val = mfspr(SPRN_HID5);
uint64_t hmeer_val = mfspr(SPRN_HMEER);
uint64_t msr_val = MSR_IDLE;
uint64_t psscr_val = pnv_deepest_stop_psscr_val;
for_each_possible_cpu(cpu) {
uint64_t pir = get_hard_smp_processor_id(cpu);
uint64_t hsprg0_val = (uint64_t)&paca[cpu];
rc = opal_slw_set_reg(pir, SPRN_HSPRG0, hsprg0_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
if (rc != 0)
return rc;
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
rc = opal_slw_set_reg(pir, P9_STOP_SPR_MSR, msr_val);
if (rc)
return rc;
rc = opal_slw_set_reg(pir,
P9_STOP_SPR_PSSCR, psscr_val);
if (rc)
return rc;
}
/* HIDs are per core registers */
if (cpu_thread_in_core(cpu) == 0) {
rc = opal_slw_set_reg(pir, SPRN_HMEER, hmeer_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_HID0, hid0_val);
if (rc != 0)
return rc;
/* Only p8 needs to set extra HID regiters */
if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_HID4, hid4_val);
if (rc != 0)
return rc;
rc = opal_slw_set_reg(pir, SPRN_HID5, hid5_val);
if (rc != 0)
return rc;
}
}
}
return 0;
}
static void pnv_alloc_idle_core_states(void)
{
int i, j;
int nr_cores = cpu_nr_cores();
u32 *core_idle_state;
/*
* core_idle_state - The lower 8 bits track the idle state of
* each thread of the core.
*
* The most significant bit is the lock bit.
*
* Initially all the bits corresponding to threads_per_core
* are set. They are cleared when the thread enters deep idle
* state like sleep and winkle/stop.
*
* Initially the lock bit is cleared. The lock bit has 2
* purposes:
* a. While the first thread in the core waking up from
* idle is restoring core state, it prevents other
* threads in the core from switching to process
* context.
* b. While the last thread in the core is saving the
* core state, it prevents a different thread from
* waking up.
*/
for (i = 0; i < nr_cores; i++) {
int first_cpu = i * threads_per_core;
int node = cpu_to_node(first_cpu);
size_t paca_ptr_array_size;
core_idle_state = kmalloc_node(sizeof(u32), GFP_KERNEL, node);
*core_idle_state = (1 << threads_per_core) - 1;
paca_ptr_array_size = (threads_per_core *
sizeof(struct paca_struct *));
for (j = 0; j < threads_per_core; j++) {
int cpu = first_cpu + j;
paca[cpu].core_idle_state_ptr = core_idle_state;
paca[cpu].thread_idle_state = PNV_THREAD_RUNNING;
paca[cpu].thread_mask = 1 << j;
if (!cpu_has_feature(CPU_FTR_POWER9_DD1))
continue;
paca[cpu].thread_sibling_pacas =
kmalloc_node(paca_ptr_array_size,
GFP_KERNEL, node);
}
}
update_subcore_sibling_mask();
if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT) {
int rc = pnv_save_sprs_for_deep_states();
if (likely(!rc))
return;
/*
* The stop-api is unable to restore hypervisor
* resources on wakeup from platform idle states which
* lose full context. So disable such states.
*/
supported_cpuidle_states &= ~OPAL_PM_LOSE_FULL_CONTEXT;
pr_warn("cpuidle-powernv: Disabling idle states that lose full context\n");
pr_warn("cpuidle-powernv: Idle power-savings, CPU-Hotplug affected\n");
if (cpu_has_feature(CPU_FTR_ARCH_300) &&
(pnv_deepest_stop_flag & OPAL_PM_LOSE_FULL_CONTEXT)) {
/*
* Use the default stop state for CPU-Hotplug
* if available.
*/
if (default_stop_found) {
pnv_deepest_stop_psscr_val =
pnv_default_stop_val;
pnv_deepest_stop_psscr_mask =
pnv_default_stop_mask;
pr_warn("cpuidle-powernv: Offlined CPUs will stop with psscr = 0x%016llx\n",
pnv_deepest_stop_psscr_val);
} else { /* Fallback to snooze loop for CPU-Hotplug */
deepest_stop_found = false;
pr_warn("cpuidle-powernv: Offlined CPUs will busy wait\n");
}
}
}
}
u32 pnv_get_supported_cpuidle_states(void)
{
return supported_cpuidle_states;
}
EXPORT_SYMBOL_GPL(pnv_get_supported_cpuidle_states);
powerpc/powernv: Introduce sysfs control for fastsleep workaround behavior Fastsleep is one of the idle state which cpuidle subsystem currently uses on power8 machines. In this state L2 cache is brought down to a threshold voltage. Therefore when the core is in fastsleep, the communication between L2 and L3 needs to be fenced. But there is a bug in the current power8 chips surrounding this fencing. OPAL provides a workaround which precludes the possibility of hitting this bug. But running with this workaround applied causes checkstop if any correctable error in L2 cache directory is detected. Hence OPAL also provides a way to undo the workaround. In the existing implementation, workaround is applied by the last thread of the core entering fastsleep and undone by the first thread waking up. But this has a performance cost. These OPAL calls account for roughly 4000 cycles everytime the core has to enter or wakeup from fastsleep. This patch introduces a sysfs attribute (fastsleep_workaround_applyonce) to choose the behavior of this workaround. By default, fastsleep_workaround_applyonce = 0. In this case, workaround is applied/undone everytime the core enters/exits fastsleep. fastsleep_workaround_applyonce = 1. In this case the workaround is applied once on all the cores and never undone. This can be triggered by echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce For simplicity this attribute can be modified only once. Implying, once fastsleep_workaround_applyonce is changed to 1, it cannot be reverted to the default state. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-20 12:02:58 +07:00
static void pnv_fastsleep_workaround_apply(void *info)
{
int rc;
int *err = info;
rc = opal_config_cpu_idle_state(OPAL_CONFIG_IDLE_FASTSLEEP,
OPAL_CONFIG_IDLE_APPLY);
if (rc)
*err = 1;
}
/*
* Used to store fastsleep workaround state
* 0 - Workaround applied/undone at fastsleep entry/exit path (Default)
* 1 - Workaround applied once, never undone.
*/
static u8 fastsleep_workaround_applyonce;
static ssize_t show_fastsleep_workaround_applyonce(struct device *dev,
struct device_attribute *attr, char *buf)
{
return sprintf(buf, "%u\n", fastsleep_workaround_applyonce);
}
static ssize_t store_fastsleep_workaround_applyonce(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
cpumask_t primary_thread_mask;
int err;
u8 val;
if (kstrtou8(buf, 0, &val) || val != 1)
return -EINVAL;
if (fastsleep_workaround_applyonce == 1)
return count;
/*
* fastsleep_workaround_applyonce = 1 implies
* fastsleep workaround needs to be left in 'applied' state on all
* the cores. Do this by-
* 1. Patching out the call to 'undo' workaround in fastsleep exit path
* 2. Sending ipi to all the cores which have at least one online thread
powerpc/powernv: Introduce sysfs control for fastsleep workaround behavior Fastsleep is one of the idle state which cpuidle subsystem currently uses on power8 machines. In this state L2 cache is brought down to a threshold voltage. Therefore when the core is in fastsleep, the communication between L2 and L3 needs to be fenced. But there is a bug in the current power8 chips surrounding this fencing. OPAL provides a workaround which precludes the possibility of hitting this bug. But running with this workaround applied causes checkstop if any correctable error in L2 cache directory is detected. Hence OPAL also provides a way to undo the workaround. In the existing implementation, workaround is applied by the last thread of the core entering fastsleep and undone by the first thread waking up. But this has a performance cost. These OPAL calls account for roughly 4000 cycles everytime the core has to enter or wakeup from fastsleep. This patch introduces a sysfs attribute (fastsleep_workaround_applyonce) to choose the behavior of this workaround. By default, fastsleep_workaround_applyonce = 0. In this case, workaround is applied/undone everytime the core enters/exits fastsleep. fastsleep_workaround_applyonce = 1. In this case the workaround is applied once on all the cores and never undone. This can be triggered by echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce For simplicity this attribute can be modified only once. Implying, once fastsleep_workaround_applyonce is changed to 1, it cannot be reverted to the default state. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-20 12:02:58 +07:00
* 3. Patching out the call to 'apply' workaround in fastsleep entry
* path
* There is no need to send ipi to cores which have all threads
* offlined, as last thread of the core entering fastsleep or deeper
* state would have applied workaround.
*/
err = patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_exit,
PPC_INST_NOP);
if (err) {
pr_err("fastsleep_workaround_applyonce change failed while patching pnv_fastsleep_workaround_at_exit");
goto fail;
}
get_online_cpus();
primary_thread_mask = cpu_online_cores_map();
on_each_cpu_mask(&primary_thread_mask,
pnv_fastsleep_workaround_apply,
&err, 1);
put_online_cpus();
if (err) {
pr_err("fastsleep_workaround_applyonce change failed while running pnv_fastsleep_workaround_apply");
goto fail;
}
err = patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_entry,
PPC_INST_NOP);
if (err) {
pr_err("fastsleep_workaround_applyonce change failed while patching pnv_fastsleep_workaround_at_entry");
goto fail;
}
fastsleep_workaround_applyonce = 1;
return count;
fail:
return -EIO;
}
static DEVICE_ATTR(fastsleep_workaround_applyonce, 0600,
show_fastsleep_workaround_applyonce,
store_fastsleep_workaround_applyonce);
static unsigned long __power7_idle_type(unsigned long type)
{
unsigned long srr1;
if (!prep_irq_for_idle_irqsoff())
return 0;
__ppc64_runlatch_off();
srr1 = power7_idle_insn(type);
__ppc64_runlatch_on();
fini_irq_for_idle_irqsoff();
return srr1;
}
void power7_idle_type(unsigned long type)
{
unsigned long srr1;
srr1 = __power7_idle_type(type);
irq_set_pending_from_srr1(srr1);
}
void power7_idle(void)
{
if (!powersave_nap)
return;
power7_idle_type(PNV_THREAD_NAP);
}
static unsigned long __power9_idle_type(unsigned long stop_psscr_val,
unsigned long stop_psscr_mask)
{
unsigned long psscr;
unsigned long srr1;
if (!prep_irq_for_idle_irqsoff())
return 0;
psscr = mfspr(SPRN_PSSCR);
psscr = (psscr & ~stop_psscr_mask) | stop_psscr_val;
__ppc64_runlatch_off();
srr1 = power9_idle_stop(psscr);
__ppc64_runlatch_on();
fini_irq_for_idle_irqsoff();
return srr1;
}
void power9_idle_type(unsigned long stop_psscr_val,
unsigned long stop_psscr_mask)
{
unsigned long srr1;
srr1 = __power9_idle_type(stop_psscr_val, stop_psscr_mask);
irq_set_pending_from_srr1(srr1);
}
/*
* Used for ppc_md.power_save which needs a function with no parameters
*/
void power9_idle(void)
{
power9_idle_type(pnv_default_stop_val, pnv_default_stop_mask);
}
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
#ifdef CONFIG_HOTPLUG_CPU
static void pnv_program_cpu_hotplug_lpcr(unsigned int cpu, u64 lpcr_val)
{
u64 pir = get_hard_smp_processor_id(cpu);
mtspr(SPRN_LPCR, lpcr_val);
/*
* Program the LPCR via stop-api only if the deepest stop state
* can lose hypervisor context.
*/
if (supported_cpuidle_states & OPAL_PM_LOSE_FULL_CONTEXT)
opal_slw_set_reg(pir, SPRN_LPCR, lpcr_val);
}
/*
* pnv_cpu_offline: A function that puts the CPU into the deepest
* available platform idle state on a CPU-Offline.
* interrupts hard disabled and no lazy irq pending.
*/
unsigned long pnv_cpu_offline(unsigned int cpu)
{
unsigned long srr1;
u32 idle_states = pnv_get_supported_cpuidle_states();
u64 lpcr_val;
/*
* We don't want to take decrementer interrupts while we are
* offline, so clear LPCR:PECE1. We keep PECE2 (and
* LPCR_PECE_HVEE on P9) enabled as to let IPIs in.
*
* If the CPU gets woken up by a special wakeup, ensure that
* the SLW engine sets LPCR with decrementer bit cleared, else
* the CPU will come back to the kernel due to a spurious
* wakeup.
*/
lpcr_val = mfspr(SPRN_LPCR) & ~(u64)LPCR_PECE1;
pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
__ppc64_runlatch_off();
if (cpu_has_feature(CPU_FTR_ARCH_300) && deepest_stop_found) {
unsigned long psscr;
psscr = mfspr(SPRN_PSSCR);
psscr = (psscr & ~pnv_deepest_stop_psscr_mask) |
pnv_deepest_stop_psscr_val;
srr1 = power9_idle_stop(psscr);
} else if ((idle_states & OPAL_PM_WINKLE_ENABLED) &&
(idle_states & OPAL_PM_LOSE_FULL_CONTEXT)) {
srr1 = power7_idle_insn(PNV_THREAD_WINKLE);
} else if ((idle_states & OPAL_PM_SLEEP_ENABLED) ||
(idle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
srr1 = power7_idle_insn(PNV_THREAD_SLEEP);
powerpc/powernv/smp: Add busy-wait loop as fall back for CPU-Hotplug Currently, the powernv cpu-offline function assumes that platform idle states such as stop on POWER9, winkle/sleep/nap on POWER8 are always available. On POWER8, it picks nap as the default state if other deep idle states like sleep/winkle are not available and enabled in the platform. On POWER9, nap is not available and all idle states are managed by STOP instruction. The parameters to the idle state are passed through processor stop status control register (PSSCR). Hence as such executing STOP would take parameters from current PSSCR. We do not want to make any assumptions in kernel on what STOP states and PSSCR features are configured by the platform. Ideally platform will configure a good set of stop states that can be used in the kernel. We would like to start with a clean slate, if the platform choose to not configure any state or there is an error in platform firmware that lead to no stop states being configured or allowed to be requested. This patch adds a fallback method for CPU-Hotplug that is similar to snooze loop at idle where the threads are left to spin at low priority and hence reduce the cycles consumed. This is a safe fallback mechanism in the case when no stop state would be requested if the platform firmware did not configure them most likely due to an error condition. Requesting a stop state when the platform has not configured them or enabled them would lead to further error conditions which could be difficult to debug. [Changelog written with inputs from svaidy@linux.vnet.ibm.com] Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-22 22:04:15 +07:00
} else if (idle_states & OPAL_PM_NAP_ENABLED) {
srr1 = power7_idle_insn(PNV_THREAD_NAP);
powerpc/powernv/smp: Add busy-wait loop as fall back for CPU-Hotplug Currently, the powernv cpu-offline function assumes that platform idle states such as stop on POWER9, winkle/sleep/nap on POWER8 are always available. On POWER8, it picks nap as the default state if other deep idle states like sleep/winkle are not available and enabled in the platform. On POWER9, nap is not available and all idle states are managed by STOP instruction. The parameters to the idle state are passed through processor stop status control register (PSSCR). Hence as such executing STOP would take parameters from current PSSCR. We do not want to make any assumptions in kernel on what STOP states and PSSCR features are configured by the platform. Ideally platform will configure a good set of stop states that can be used in the kernel. We would like to start with a clean slate, if the platform choose to not configure any state or there is an error in platform firmware that lead to no stop states being configured or allowed to be requested. This patch adds a fallback method for CPU-Hotplug that is similar to snooze loop at idle where the threads are left to spin at low priority and hence reduce the cycles consumed. This is a safe fallback mechanism in the case when no stop state would be requested if the platform firmware did not configure them most likely due to an error condition. Requesting a stop state when the platform has not configured them or enabled them would lead to further error conditions which could be difficult to debug. [Changelog written with inputs from svaidy@linux.vnet.ibm.com] Reviewed-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-03-22 22:04:15 +07:00
} else {
/* This is the fallback method. We emulate snooze */
while (!generic_check_cpu_restart(cpu)) {
HMT_low();
HMT_very_low();
}
srr1 = 0;
HMT_medium();
}
__ppc64_runlatch_on();
/*
* Re-enable decrementer interrupts in LPCR.
*
* Further, we want stop states to be woken up by decrementer
* for non-hotplug cases. So program the LPCR via stop api as
* well.
*/
lpcr_val = mfspr(SPRN_LPCR) | (u64)LPCR_PECE1;
pnv_program_cpu_hotplug_lpcr(cpu, lpcr_val);
return srr1;
}
#endif
/*
* Power ISA 3.0 idle initialization.
*
* POWER ISA 3.0 defines a new SPR Processor stop Status and Control
* Register (PSSCR) to control idle behavior.
*
* PSSCR layout:
* ----------------------------------------------------------
* | PLS | /// | SD | ESL | EC | PSLL | /// | TR | MTL | RL |
* ----------------------------------------------------------
* 0 4 41 42 43 44 48 54 56 60
*
* PSSCR key fields:
* Bits 0:3 - Power-Saving Level Status (PLS). This field indicates the
* lowest power-saving state the thread entered since stop instruction was
* last executed.
*
* Bit 41 - Status Disable(SD)
* 0 - Shows PLS entries
* 1 - PLS entries are all 0
*
* Bit 42 - Enable State Loss
* 0 - No state is lost irrespective of other fields
* 1 - Allows state loss
*
* Bit 43 - Exit Criterion
* 0 - Exit from power-save mode on any interrupt
* 1 - Exit from power-save mode controlled by LPCR's PECE bits
*
* Bits 44:47 - Power-Saving Level Limit
* This limits the power-saving level that can be entered into.
*
* Bits 60:63 - Requested Level
* Used to specify which power-saving level must be entered on executing
* stop instruction
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
*/
int validate_psscr_val_mask(u64 *psscr_val, u64 *psscr_mask, u32 flags)
{
int err = 0;
/*
* psscr_mask == 0xf indicates an older firmware.
* Set remaining fields of psscr to the default values.
* See NOTE above definition of PSSCR_HV_DEFAULT_VAL
*/
if (*psscr_mask == 0xf) {
*psscr_val = *psscr_val | PSSCR_HV_DEFAULT_VAL;
*psscr_mask = PSSCR_HV_DEFAULT_MASK;
return err;
}
/*
* New firmware is expected to set the psscr_val bits correctly.
* Validate that the following invariants are correctly maintained by
* the new firmware.
* - ESL bit value matches the EC bit value.
* - ESL bit is set for all the deep stop states.
*/
if (GET_PSSCR_ESL(*psscr_val) != GET_PSSCR_EC(*psscr_val)) {
err = ERR_EC_ESL_MISMATCH;
} else if ((flags & OPAL_PM_LOSE_FULL_CONTEXT) &&
GET_PSSCR_ESL(*psscr_val) == 0) {
err = ERR_DEEP_STATE_ESL_MISMATCH;
}
return err;
}
/*
* pnv_arch300_idle_init: Initializes the default idle state, first
* deep idle state and deepest idle state on
* ISA 3.0 CPUs.
*
* @np: /ibm,opal/power-mgt device node
* @flags: cpu-idle-state-flags array
* @dt_idle_states: Number of idle state entries
* Returns 0 on success
*/
static int __init pnv_power9_idle_init(struct device_node *np, u32 *flags,
int dt_idle_states)
{
u64 *psscr_val = NULL;
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
u64 *psscr_mask = NULL;
u32 *residency_ns = NULL;
u64 max_residency_ns = 0;
int rc = 0, i;
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
psscr_val = kcalloc(dt_idle_states, sizeof(*psscr_val), GFP_KERNEL);
psscr_mask = kcalloc(dt_idle_states, sizeof(*psscr_mask), GFP_KERNEL);
residency_ns = kcalloc(dt_idle_states, sizeof(*residency_ns),
GFP_KERNEL);
if (!psscr_val || !psscr_mask || !residency_ns) {
rc = -1;
goto out;
}
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
if (of_property_read_u64_array(np,
"ibm,cpu-idle-state-psscr",
psscr_val, dt_idle_states)) {
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr in DT\n");
rc = -1;
goto out;
}
if (of_property_read_u64_array(np,
"ibm,cpu-idle-state-psscr-mask",
psscr_mask, dt_idle_states)) {
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr-mask in DT\n");
rc = -1;
goto out;
}
if (of_property_read_u32_array(np,
"ibm,cpu-idle-state-residency-ns",
residency_ns, dt_idle_states)) {
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-residency-ns in DT\n");
rc = -1;
goto out;
}
/*
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
* Set pnv_first_deep_stop_state, pnv_deepest_stop_psscr_{val,mask},
* and the pnv_default_stop_{val,mask}.
*
* pnv_first_deep_stop_state should be set to the first stop
* level to cause hypervisor state loss.
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
*
* pnv_deepest_stop_{val,mask} should be set to values corresponding to
* the deepest stop state.
*
* pnv_default_stop_{val,mask} should be set to values corresponding to
* the shallowest (OPAL_PM_STOP_INST_FAST) loss-less stop state.
*/
pnv_first_deep_stop_state = MAX_STOP_STATE;
for (i = 0; i < dt_idle_states; i++) {
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
int err;
u64 psscr_rl = psscr_val[i] & PSSCR_RL_MASK;
if ((flags[i] & OPAL_PM_LOSE_FULL_CONTEXT) &&
(pnv_first_deep_stop_state > psscr_rl))
pnv_first_deep_stop_state = psscr_rl;
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
err = validate_psscr_val_mask(&psscr_val[i], &psscr_mask[i],
flags[i]);
if (err) {
report_invalid_psscr_val(psscr_val[i], err);
continue;
}
if (max_residency_ns < residency_ns[i]) {
max_residency_ns = residency_ns[i];
pnv_deepest_stop_psscr_val = psscr_val[i];
pnv_deepest_stop_psscr_mask = psscr_mask[i];
pnv_deepest_stop_flag = flags[i];
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
deepest_stop_found = true;
}
if (!default_stop_found &&
(flags[i] & OPAL_PM_STOP_INST_FAST)) {
pnv_default_stop_val = psscr_val[i];
pnv_default_stop_mask = psscr_mask[i];
default_stop_found = true;
}
}
if (unlikely(!default_stop_found)) {
pr_warn("cpuidle-powernv: No suitable default stop state found. Disabling platform idle.\n");
} else {
ppc_md.power_save = power9_idle;
pr_info("cpuidle-powernv: Default stop: psscr = 0x%016llx,mask=0x%016llx\n",
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
pnv_default_stop_val, pnv_default_stop_mask);
}
if (unlikely(!deepest_stop_found)) {
pr_warn("cpuidle-powernv: No suitable stop state for CPU-Hotplug. Offlined CPUs will busy wait");
} else {
pr_info("cpuidle-powernv: Deepest stop: psscr = 0x%016llx,mask=0x%016llx\n",
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
pnv_deepest_stop_psscr_val,
pnv_deepest_stop_psscr_mask);
}
pr_info("cpuidle-powernv: Requested Level (RL) value of first deep stop = 0x%llx\n",
pnv_first_deep_stop_state);
out:
kfree(psscr_val);
powernv: Pass PSSCR value and mask to power9_idle_stop The power9_idle_stop method currently takes only the requested stop level as a parameter and picks up the rest of the PSSCR bits from a hand-coded macro. This is not a very flexible design, especially when the firmware has the capability to communicate the psscr value and the mask associated with a particular stop state via device tree. This patch modifies the power9_idle_stop API to take as parameters the PSSCR value and the PSSCR mask corresponding to the stop state that needs to be set. These PSSCR value and mask are respectively obtained by parsing the "ibm,cpu-idle-state-psscr" and "ibm,cpu-idle-state-psscr-mask" fields from the device tree. In addition to this, the patch adds support for handling stop states for which ESL and EC bits in the PSSCR are zero. As per the architecture, a wakeup from these stop states resumes execution from the subsequent instruction as opposed to waking up at the System Vector. The older firmware sets only the Requested Level (RL) field in the psscr and psscr-mask exposed in the device tree. For older firmware where psscr-mask=0xf, this patch will set the default sane values that the set for for remaining PSSCR fields (i.e PSLL, MTL, ESL, EC, and TR). For the new firmware, the patch will validate that the invariants required by the ISA for the psscr values are maintained by the firmware. This skiboot patch that exports fully populated PSSCR values and the mask for all the stop states can be found here: https://lists.ozlabs.org/pipermail/skiboot/2016-September/004869.html [Optimize the number of instructions before entering STOP with ESL=EC=0, validate the PSSCR values provided by the firimware maintains the invariants required as per the ISA suggested by Balbir Singh] Acked-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-01-25 15:36:28 +07:00
kfree(psscr_mask);
kfree(residency_ns);
return rc;
}
/*
* Probe device tree for supported idle states
*/
static void __init pnv_probe_idle_states(void)
{
struct device_node *np;
int dt_idle_states;
u32 *flags = NULL;
int i;
np = of_find_node_by_path("/ibm,opal/power-mgt");
if (!np) {
pr_warn("opal: PowerMgmt Node not found\n");
goto out;
}
dt_idle_states = of_property_count_u32_elems(np,
"ibm,cpu-idle-state-flags");
if (dt_idle_states < 0) {
pr_warn("cpuidle-powernv: no idle states found in the DT\n");
goto out;
}
flags = kcalloc(dt_idle_states, sizeof(*flags), GFP_KERNEL);
if (of_property_read_u32_array(np,
"ibm,cpu-idle-state-flags", flags, dt_idle_states)) {
pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");
goto out;
}
if (cpu_has_feature(CPU_FTR_ARCH_300)) {
if (pnv_power9_idle_init(np, flags, dt_idle_states))
goto out;
}
for (i = 0; i < dt_idle_states; i++)
supported_cpuidle_states |= flags[i];
out:
kfree(flags);
}
static int __init pnv_init_idle_states(void)
{
supported_cpuidle_states = 0;
if (cpuidle_disable != IDLE_NO_OVERRIDE)
goto out;
pnv_probe_idle_states();
if (!(supported_cpuidle_states & OPAL_PM_SLEEP_ENABLED_ER1)) {
patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_entry,
PPC_INST_NOP);
patch_instruction(
(unsigned int *)pnv_fastsleep_workaround_at_exit,
PPC_INST_NOP);
powerpc/powernv: Introduce sysfs control for fastsleep workaround behavior Fastsleep is one of the idle state which cpuidle subsystem currently uses on power8 machines. In this state L2 cache is brought down to a threshold voltage. Therefore when the core is in fastsleep, the communication between L2 and L3 needs to be fenced. But there is a bug in the current power8 chips surrounding this fencing. OPAL provides a workaround which precludes the possibility of hitting this bug. But running with this workaround applied causes checkstop if any correctable error in L2 cache directory is detected. Hence OPAL also provides a way to undo the workaround. In the existing implementation, workaround is applied by the last thread of the core entering fastsleep and undone by the first thread waking up. But this has a performance cost. These OPAL calls account for roughly 4000 cycles everytime the core has to enter or wakeup from fastsleep. This patch introduces a sysfs attribute (fastsleep_workaround_applyonce) to choose the behavior of this workaround. By default, fastsleep_workaround_applyonce = 0. In this case, workaround is applied/undone everytime the core enters/exits fastsleep. fastsleep_workaround_applyonce = 1. In this case the workaround is applied once on all the cores and never undone. This can be triggered by echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce For simplicity this attribute can be modified only once. Implying, once fastsleep_workaround_applyonce is changed to 1, it cannot be reverted to the default state. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-20 12:02:58 +07:00
} else {
/*
* OPAL_PM_SLEEP_ENABLED_ER1 is set. It indicates that
* workaround is needed to use fastsleep. Provide sysfs
* control to choose how this workaround has to be applied.
*/
device_create_file(cpu_subsys.dev_root,
&dev_attr_fastsleep_workaround_applyonce);
}
powerpc/powernv: Introduce sysfs control for fastsleep workaround behavior Fastsleep is one of the idle state which cpuidle subsystem currently uses on power8 machines. In this state L2 cache is brought down to a threshold voltage. Therefore when the core is in fastsleep, the communication between L2 and L3 needs to be fenced. But there is a bug in the current power8 chips surrounding this fencing. OPAL provides a workaround which precludes the possibility of hitting this bug. But running with this workaround applied causes checkstop if any correctable error in L2 cache directory is detected. Hence OPAL also provides a way to undo the workaround. In the existing implementation, workaround is applied by the last thread of the core entering fastsleep and undone by the first thread waking up. But this has a performance cost. These OPAL calls account for roughly 4000 cycles everytime the core has to enter or wakeup from fastsleep. This patch introduces a sysfs attribute (fastsleep_workaround_applyonce) to choose the behavior of this workaround. By default, fastsleep_workaround_applyonce = 0. In this case, workaround is applied/undone everytime the core enters/exits fastsleep. fastsleep_workaround_applyonce = 1. In this case the workaround is applied once on all the cores and never undone. This can be triggered by echo 1 > /sys/devices/system/cpu/fastsleep_workaround_applyonce For simplicity this attribute can be modified only once. Implying, once fastsleep_workaround_applyonce is changed to 1, it cannot be reverted to the default state. Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com> Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-04-20 12:02:58 +07:00
pnv_alloc_idle_core_states();
/*
* For each CPU, record its PACA address in each of it's
* sibling thread's PACA at the slot corresponding to this
* CPU's index in the core.
*/
if (cpu_has_feature(CPU_FTR_POWER9_DD1)) {
int cpu;
pr_info("powernv: idle: Saving PACA pointers of all CPUs in their thread sibling PACA\n");
for_each_possible_cpu(cpu) {
int base_cpu = cpu_first_thread_sibling(cpu);
int idx = cpu_thread_in_core(cpu);
int i;
for (i = 0; i < threads_per_core; i++) {
int j = base_cpu + i;
paca[j].thread_sibling_pacas[idx] = &paca[cpu];
}
}
}
if (supported_cpuidle_states & OPAL_PM_NAP_ENABLED)
ppc_md.power_save = power7_idle;
out:
return 0;
}
machine_subsys_initcall(powernv, pnv_init_idle_states);