Sergei Shtylyov d25a4cbba4 drm/bridge: adv7511: add support for the 2nd chip ... The Renesas Wheat board has 2 ADV7513 chips on the same I2C bus, however the ADV751x driver only supports 1 chip as it tries to assign the packet/ EDID/CEC memory I2C devices to the fixed I2C addresses. Assign these I2C addresses at the fixed offsets (derived from the programming guide) from the main register map address instead. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1580212.O1LYdJFM97@wasted.cogentembedded.com		2016-09-12 13:20:43 +05:30
..
adv7511_drv.c	drm/bridge: adv7511: add support for the 2nd chip	2016-09-12 13:20:43 +05:30
adv7511.h	drm/bridge: adv7533: Change number of DSI lanes dynamically	2016-07-13 14:24:37 +05:30
adv7533.c	drm/bridge: adv7511: add support for the 2nd chip	2016-09-12 13:20:43 +05:30
Kconfig	drm/bridge: adv7533: Create a MIPI DSI device	2016-07-13 14:24:37 +05:30
Makefile	drm/bridge: adv7533: Initial support for ADV7533	2016-07-13 14:24:36 +05:30