drm/bridge: adv7511: add support for the 2nd chip

The Renesas Wheat board has 2 ADV7513 chips on the same I2C bus, however
the ADV751x driver only supports 1 chip as it tries to assign the packet/
EDID/CEC memory I2C devices to the fixed I2C addresses. Assign these I2C
addresses at the fixed offsets (derived from the programming guide) from
the main register map address instead.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1580212.O1LYdJFM97@wasted.cogentembedded.com
This commit is contained in:
Sergei Shtylyov 2016-09-05 22:43:17 +03:00 committed by Archit Taneja
parent dec90ea145
commit d25a4cbba4
2 changed files with 8 additions and 9 deletions

View File

@ -922,15 +922,13 @@ static int adv7511_parse_dt(struct device_node *np,
return 0;
}
static const int edid_i2c_addr = 0x7e;
static const int packet_i2c_addr = 0x70;
static const int cec_i2c_addr = 0x78;
static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
{
struct adv7511_link_config link_config;
struct adv7511 *adv7511;
struct device *dev = &i2c->dev;
unsigned int main_i2c_addr = i2c->addr << 1;
unsigned int edid_i2c_addr = main_i2c_addr + 4;
unsigned int val;
int ret;
@ -991,8 +989,10 @@ static int adv7511_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
regmap_write(adv7511->regmap, ADV7511_REG_EDID_I2C_ADDR, edid_i2c_addr);
regmap_write(adv7511->regmap, ADV7511_REG_PACKET_I2C_ADDR,
packet_i2c_addr);
regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR, cec_i2c_addr);
main_i2c_addr - 0xa);
regmap_write(adv7511->regmap, ADV7511_REG_CEC_I2C_ADDR,
main_i2c_addr - 2);
adv7511_packet_disable(adv7511, 0xffff);
adv7511->i2c_main = i2c;

View File

@ -149,13 +149,12 @@ void adv7533_uninit_cec(struct adv7511 *adv)
i2c_unregister_device(adv->i2c_cec);
}
static const int cec_i2c_addr = 0x78;
int adv7533_init_cec(struct adv7511 *adv)
{
int ret;
adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter, cec_i2c_addr >> 1);
adv->i2c_cec = i2c_new_dummy(adv->i2c_main->adapter,
adv->i2c_main->addr - 1);
if (!adv->i2c_cec)
return -ENOMEM;