AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-21 23:53:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
06e81e3e92
linux_dsm_epyc7002/drivers/infiniband/hw/hfi1/firmware.c
Sebastian Sanchez 9996b049f6 IB/hfi1: Fix infinite loop in 8051 command error path 
When an 8051 command times out, the entire DC block is restarted. During
the restart, the host interface version bit is set, which calls
do_8051_command() recursively. The host version bit needs to be set
before the link moves into polling, so the host version bit can be set
in set_local_link_attributes() instead. Thus, the 8051 command functions
can be simplied as a non-locking version (dd->dc8051_lock) of those
functions are no longer needed.

Fixes: 9be6a5d788 ("IB/hfi1: Prevent LNI out of sync by resetting host interface version")
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-01-05 13:34:55 -05:00

2306 lines
64 KiB
C
Raw Blame History

/*
* Copyright(c) 2015 - 2017 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* BSD LICENSE
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <linux/firmware.h>
#include <linux/mutex.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/crc32.h>
#include "hfi.h"
#include "trace.h"
/*
* Make it easy to toggle firmware file name and if it gets loaded by
* editing the following. This may be something we do while in development
* but not necessarily something a user would ever need to use.
*/
#define DEFAULT_FW_8051_NAME_FPGA "hfi_dc8051.bin"
#define DEFAULT_FW_8051_NAME_ASIC "hfi1_dc8051.fw"
#define DEFAULT_FW_FABRIC_NAME "hfi1_fabric.fw"
#define DEFAULT_FW_SBUS_NAME "hfi1_sbus.fw"
#define DEFAULT_FW_PCIE_NAME "hfi1_pcie.fw"
#define ALT_FW_8051_NAME_ASIC "hfi1_dc8051_d.fw"
#define ALT_FW_FABRIC_NAME "hfi1_fabric_d.fw"
#define ALT_FW_SBUS_NAME "hfi1_sbus_d.fw"
#define ALT_FW_PCIE_NAME "hfi1_pcie_d.fw"
MODULE_FIRMWARE(DEFAULT_FW_8051_NAME_ASIC);
MODULE_FIRMWARE(DEFAULT_FW_FABRIC_NAME);
MODULE_FIRMWARE(DEFAULT_FW_SBUS_NAME);
MODULE_FIRMWARE(DEFAULT_FW_PCIE_NAME);
static uint fw_8051_load = 1;
static uint fw_fabric_serdes_load = 1;
static uint fw_pcie_serdes_load = 1;
static uint fw_sbus_load = 1;
/* Firmware file names get set in hfi1_firmware_init() based on the above */
static char *fw_8051_name;
static char *fw_fabric_serdes_name;
static char *fw_sbus_name;
static char *fw_pcie_serdes_name;
#define SBUS_MAX_POLL_COUNT 100
#define SBUS_COUNTER(reg, name) \
(((reg) >> ASIC_STS_SBUS_COUNTERS_##name##_CNT_SHIFT) & \
ASIC_STS_SBUS_COUNTERS_##name##_CNT_MASK)
/*
* Firmware security header.
*/
struct css_header {
u32 module_type;
u32 header_len;
u32 header_version;
u32 module_id;
u32 module_vendor;
u32 date; /* BCD yyyymmdd */
u32 size; /* in DWORDs */
u32 key_size; /* in DWORDs */
u32 modulus_size; /* in DWORDs */
u32 exponent_size; /* in DWORDs */
u32 reserved[22];
};
/* expected field values */
#define CSS_MODULE_TYPE 0x00000006
#define CSS_HEADER_LEN 0x000000a1
#define CSS_HEADER_VERSION 0x00010000
#define CSS_MODULE_VENDOR 0x00008086
#define KEY_SIZE 256
#define MU_SIZE 8
#define EXPONENT_SIZE 4
/* size of platform configuration partition */
#define MAX_PLATFORM_CONFIG_FILE_SIZE 4096
/* size of file of plaform configuration encoded in format version 4 */
#define PLATFORM_CONFIG_FORMAT_4_FILE_SIZE 528
/* the file itself */
struct firmware_file {
struct css_header css_header;
u8 modulus[KEY_SIZE];
u8 exponent[EXPONENT_SIZE];
u8 signature[KEY_SIZE];
u8 firmware[];
};
struct augmented_firmware_file {
struct css_header css_header;
u8 modulus[KEY_SIZE];
u8 exponent[EXPONENT_SIZE];
u8 signature[KEY_SIZE];
u8 r2[KEY_SIZE];
u8 mu[MU_SIZE];
u8 firmware[];
};
/* augmented file size difference */
#define AUGMENT_SIZE (sizeof(struct augmented_firmware_file) - \
sizeof(struct firmware_file))
struct firmware_details {
/* Linux core piece */
const struct firmware *fw;
struct css_header *css_header;
u8 *firmware_ptr; /* pointer to binary data */
u32 firmware_len; /* length in bytes */
u8 *modulus; /* pointer to the modulus */
u8 *exponent; /* pointer to the exponent */
u8 *signature; /* pointer to the signature */
u8 *r2; /* pointer to r2 */
u8 *mu; /* pointer to mu */
struct augmented_firmware_file dummy_header;
};
/*
* The mutex protects fw_state, fw_err, and all of the firmware_details
* variables.
*/
static DEFINE_MUTEX(fw_mutex);
enum fw_state {
FW_EMPTY,
FW_TRY,
FW_FINAL,
FW_ERR
};
static enum fw_state fw_state = FW_EMPTY;
static int fw_err;
static struct firmware_details fw_8051;
static struct firmware_details fw_fabric;
static struct firmware_details fw_pcie;
static struct firmware_details fw_sbus;
/* flags for turn_off_spicos() */
#define SPICO_SBUS 0x1
#define SPICO_FABRIC 0x2
#define ENABLE_SPICO_SMASK 0x1
/* security block commands */
#define RSA_CMD_INIT 0x1
#define RSA_CMD_START 0x2
/* security block status */
#define RSA_STATUS_IDLE 0x0
#define RSA_STATUS_ACTIVE 0x1
#define RSA_STATUS_DONE 0x2
#define RSA_STATUS_FAILED 0x3
/* RSA engine timeout, in ms */
#define RSA_ENGINE_TIMEOUT 100 /* ms */
/* hardware mutex timeout, in ms */
#define HM_TIMEOUT 10 /* ms */
/* 8051 memory access timeout, in us */
#define DC8051_ACCESS_TIMEOUT 100 /* us */
/* the number of fabric SerDes on the SBus */
#define NUM_FABRIC_SERDES 4
/* ASIC_STS_SBUS_RESULT.RESULT_CODE value */
#define SBUS_READ_COMPLETE 0x4
/* SBus fabric SerDes addresses, one set per HFI */
static const u8 fabric_serdes_addrs[2][NUM_FABRIC_SERDES] = {
{ 0x01, 0x02, 0x03, 0x04 },
{ 0x28, 0x29, 0x2a, 0x2b }
};
/* SBus PCIe SerDes addresses, one set per HFI */
static const u8 pcie_serdes_addrs[2][NUM_PCIE_SERDES] = {
{ 0x08, 0x0a, 0x0c, 0x0e, 0x10, 0x12, 0x14, 0x16,
0x18, 0x1a, 0x1c, 0x1e, 0x20, 0x22, 0x24, 0x26 },
{ 0x2f, 0x31, 0x33, 0x35, 0x37, 0x39, 0x3b, 0x3d,
0x3f, 0x41, 0x43, 0x45, 0x47, 0x49, 0x4b, 0x4d }
};
/* SBus PCIe PCS addresses, one set per HFI */
const u8 pcie_pcs_addrs[2][NUM_PCIE_SERDES] = {
{ 0x09, 0x0b, 0x0d, 0x0f, 0x11, 0x13, 0x15, 0x17,
0x19, 0x1b, 0x1d, 0x1f, 0x21, 0x23, 0x25, 0x27 },
{ 0x30, 0x32, 0x34, 0x36, 0x38, 0x3a, 0x3c, 0x3e,
0x40, 0x42, 0x44, 0x46, 0x48, 0x4a, 0x4c, 0x4e }
};
/* SBus fabric SerDes broadcast addresses, one per HFI */
static const u8 fabric_serdes_broadcast[2] = { 0xe4, 0xe5 };
static const u8 all_fabric_serdes_broadcast = 0xe1;
/* SBus PCIe SerDes broadcast addresses, one per HFI */
const u8 pcie_serdes_broadcast[2] = { 0xe2, 0xe3 };
static const u8 all_pcie_serdes_broadcast = 0xe0;
static const u32 platform_config_table_limits[PLATFORM_CONFIG_TABLE_MAX] = {
0,
SYSTEM_TABLE_MAX,
PORT_TABLE_MAX,
RX_PRESET_TABLE_MAX,
TX_PRESET_TABLE_MAX,
QSFP_ATTEN_TABLE_MAX,
VARIABLE_SETTINGS_TABLE_MAX
};
/* forwards */
static void dispose_one_firmware(struct firmware_details *fdet);
static int load_fabric_serdes_firmware(struct hfi1_devdata *dd,
struct firmware_details *fdet);
static void dump_fw_version(struct hfi1_devdata *dd);
/*
* Read a single 64-bit value from 8051 data memory.
*
* Expects:
* o caller to have already set up data read, no auto increment
* o caller to turn off read enable when finished
*
* The address argument is a byte offset. Bits 0:2 in the address are
* ignored - i.e. the hardware will always do aligned 8-byte reads as if
* the lower bits are zero.
*
* Return 0 on success, -ENXIO on a read error (timeout).
*/
static int __read_8051_data(struct hfi1_devdata *dd, u32 addr, u64 *result)
{
u64 reg;
int count;
/* step 1: set the address, clear enable */
reg = (addr & DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_MASK)
<< DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_SHIFT;
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, reg);
/* step 2: enable */
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL,
reg | DC_DC8051_CFG_RAM_ACCESS_CTRL_READ_ENA_SMASK);
/* wait until ACCESS_COMPLETED is set */
count = 0;
while ((read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_STATUS)
& DC_DC8051_CFG_RAM_ACCESS_STATUS_ACCESS_COMPLETED_SMASK)
== 0) {
count++;
if (count > DC8051_ACCESS_TIMEOUT) {
dd_dev_err(dd, "timeout reading 8051 data\n");
return -ENXIO;
}
ndelay(10);
}
/* gather the data */
*result = read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_RD_DATA);
return 0;
}
/*
* Read 8051 data starting at addr, for len bytes. Will read in 8-byte chunks.
* Return 0 on success, -errno on error.
*/
int read_8051_data(struct hfi1_devdata *dd, u32 addr, u32 len, u64 *result)
{
unsigned long flags;
u32 done;
int ret = 0;
spin_lock_irqsave(&dd->dc8051_memlock, flags);
/* data read set-up, no auto-increment */
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, 0);
for (done = 0; done < len; addr += 8, done += 8, result++) {
ret = __read_8051_data(dd, addr, result);
if (ret)
break;
}
/* turn off read enable */
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, 0);
spin_unlock_irqrestore(&dd->dc8051_memlock, flags);
return ret;
}
/*
* Write data or code to the 8051 code or data RAM.
*/
static int write_8051(struct hfi1_devdata *dd, int code, u32 start,
const u8 *data, u32 len)
{
u64 reg;
u32 offset;
int aligned, count;
/* check alignment */
aligned = ((unsigned long)data & 0x7) == 0;
/* write set-up */
reg = (code ? DC_DC8051_CFG_RAM_ACCESS_SETUP_RAM_SEL_SMASK : 0ull)
| DC_DC8051_CFG_RAM_ACCESS_SETUP_AUTO_INCR_ADDR_SMASK;
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, reg);
reg = ((start & DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_MASK)
<< DC_DC8051_CFG_RAM_ACCESS_CTRL_ADDRESS_SHIFT)
| DC_DC8051_CFG_RAM_ACCESS_CTRL_WRITE_ENA_SMASK;
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, reg);
/* write */
for (offset = 0; offset < len; offset += 8) {
int bytes = len - offset;
if (bytes < 8) {
reg = 0;
memcpy(&reg, &data[offset], bytes);
} else if (aligned) {
reg = *(u64 *)&data[offset];
} else {
memcpy(&reg, &data[offset], 8);
}
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_WR_DATA, reg);
/* wait until ACCESS_COMPLETED is set */
count = 0;
while ((read_csr(dd, DC_DC8051_CFG_RAM_ACCESS_STATUS)
& DC_DC8051_CFG_RAM_ACCESS_STATUS_ACCESS_COMPLETED_SMASK)
== 0) {
count++;
if (count > DC8051_ACCESS_TIMEOUT) {
dd_dev_err(dd, "timeout writing 8051 data\n");
return -ENXIO;
}
udelay(1);
}
}
/* turn off write access, auto increment (also sets to data access) */
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_CTRL, 0);
write_csr(dd, DC_DC8051_CFG_RAM_ACCESS_SETUP, 0);
return 0;
}
/* return 0 if values match, non-zero and complain otherwise */
static int invalid_header(struct hfi1_devdata *dd, const char *what,
u32 actual, u32 expected)
{
if (actual == expected)
return 0;
dd_dev_err(dd,
"invalid firmware header field %s: expected 0x%x, actual 0x%x\n",
what, expected, actual);
return 1;
}
/*
* Verify that the static fields in the CSS header match.
*/
static int verify_css_header(struct hfi1_devdata *dd, struct css_header *css)
{
/* verify CSS header fields (most sizes are in DW, so add /4) */
if (invalid_header(dd, "module_type", css->module_type,
CSS_MODULE_TYPE) ||
invalid_header(dd, "header_len", css->header_len,
(sizeof(struct firmware_file) / 4)) ||
invalid_header(dd, "header_version", css->header_version,
CSS_HEADER_VERSION) ||
invalid_header(dd, "module_vendor", css->module_vendor,
CSS_MODULE_VENDOR) ||
invalid_header(dd, "key_size", css->key_size, KEY_SIZE / 4) ||
invalid_header(dd, "modulus_size", css->modulus_size,
KEY_SIZE / 4) ||
invalid_header(dd, "exponent_size", css->exponent_size,
EXPONENT_SIZE / 4)) {
return -EINVAL;
}
return 0;
}
/*
* Make sure there are at least some bytes after the prefix.
*/
static int payload_check(struct hfi1_devdata *dd, const char *name,
long file_size, long prefix_size)
{
/* make sure we have some payload */
if (prefix_size >= file_size) {
dd_dev_err(dd,
"firmware \"%s\", size %ld, must be larger than %ld bytes\n",
name, file_size, prefix_size);
return -EINVAL;
}
return 0;
}
/*
* Request the firmware from the system. Extract the pieces and fill in
* fdet. If successful, the caller will need to call dispose_one_firmware().
* Returns 0 on success, -ERRNO on error.
*/
static int obtain_one_firmware(struct hfi1_devdata *dd, const char *name,
struct firmware_details *fdet)
{
struct css_header *css;
int ret;
memset(fdet, 0, sizeof(*fdet));
ret = request_firmware(&fdet->fw, name, &dd->pcidev->dev);
if (ret) {
dd_dev_warn(dd, "cannot find firmware \"%s\", err %d\n",
name, ret);
return ret;
}
/* verify the firmware */
if (fdet->fw->size < sizeof(struct css_header)) {
dd_dev_err(dd, "firmware \"%s\" is too small\n", name);
ret = -EINVAL;
goto done;
}
css = (struct css_header *)fdet->fw->data;
hfi1_cdbg(FIRMWARE, "Firmware %s details:", name);
hfi1_cdbg(FIRMWARE, "file size: 0x%lx bytes", fdet->fw->size);
hfi1_cdbg(FIRMWARE, "CSS structure:");
hfi1_cdbg(FIRMWARE, " module_type 0x%x", css->module_type);
hfi1_cdbg(FIRMWARE, " header_len 0x%03x (0x%03x bytes)",
css->header_len, 4 * css->header_len);
hfi1_cdbg(FIRMWARE, " header_version 0x%x", css->header_version);
hfi1_cdbg(FIRMWARE, " module_id 0x%x", css->module_id);
hfi1_cdbg(FIRMWARE, " module_vendor 0x%x", css->module_vendor);
hfi1_cdbg(FIRMWARE, " date 0x%x", css->date);
hfi1_cdbg(FIRMWARE, " size 0x%03x (0x%03x bytes)",
css->size, 4 * css->size);
hfi1_cdbg(FIRMWARE, " key_size 0x%03x (0x%03x bytes)",
css->key_size, 4 * css->key_size);
hfi1_cdbg(FIRMWARE, " modulus_size 0x%03x (0x%03x bytes)",
css->modulus_size, 4 * css->modulus_size);
hfi1_cdbg(FIRMWARE, " exponent_size 0x%03x (0x%03x bytes)",
css->exponent_size, 4 * css->exponent_size);
hfi1_cdbg(FIRMWARE, "firmware size: 0x%lx bytes",
fdet->fw->size - sizeof(struct firmware_file));
/*
* If the file does not have a valid CSS header, fail.
* Otherwise, check the CSS size field for an expected size.
* The augmented file has r2 and mu inserted after the header
* was generated, so there will be a known difference between
* the CSS header size and the actual file size. Use this
* difference to identify an augmented file.
*
* Note: css->size is in DWORDs, multiply by 4 to get bytes.
*/
ret = verify_css_header(dd, css);
if (ret) {
dd_dev_info(dd, "Invalid CSS header for \"%s\"\n", name);
} else if ((css->size * 4) == fdet->fw->size) {
/* non-augmented firmware file */
struct firmware_file *ff = (struct firmware_file *)
fdet->fw->data;
/* make sure there are bytes in the payload */
ret = payload_check(dd, name, fdet->fw->size,
sizeof(struct firmware_file));
if (ret == 0) {
fdet->css_header = css;
fdet->modulus = ff->modulus;
fdet->exponent = ff->exponent;
fdet->signature = ff->signature;
fdet->r2 = fdet->dummy_header.r2; /* use dummy space */
fdet->mu = fdet->dummy_header.mu; /* use dummy space */
fdet->firmware_ptr = ff->firmware;
fdet->firmware_len = fdet->fw->size -
sizeof(struct firmware_file);
/*
* Header does not include r2 and mu - generate here.
* For now, fail.
*/
dd_dev_err(dd, "driver is unable to validate firmware without r2 and mu (not in firmware file)\n");
ret = -EINVAL;
}
} else if ((css->size * 4) + AUGMENT_SIZE == fdet->fw->size) {
/* augmented firmware file */
struct augmented_firmware_file *aff =
(struct augmented_firmware_file *)fdet->fw->data;
/* make sure there are bytes in the payload */
ret = payload_check(dd, name, fdet->fw->size,
sizeof(struct augmented_firmware_file));
if (ret == 0) {
fdet->css_header = css;
fdet->modulus = aff->modulus;
fdet->exponent = aff->exponent;
fdet->signature = aff->signature;
fdet->r2 = aff->r2;
fdet->mu = aff->mu;
fdet->firmware_ptr = aff->firmware;
fdet->firmware_len = fdet->fw->size -
sizeof(struct augmented_firmware_file);
}
} else {
/* css->size check failed */
dd_dev_err(dd,
"invalid firmware header field size: expected 0x%lx or 0x%lx, actual 0x%x\n",
fdet->fw->size / 4,
(fdet->fw->size - AUGMENT_SIZE) / 4,
css->size);
ret = -EINVAL;
}
done:
/* if returning an error, clean up after ourselves */
if (ret)
dispose_one_firmware(fdet);
return ret;
}
static void dispose_one_firmware(struct firmware_details *fdet)
{
release_firmware(fdet->fw);
/* erase all previous information */
memset(fdet, 0, sizeof(*fdet));
}
/*
* Obtain the 4 firmwares from the OS. All must be obtained at once or not
* at all. If called with the firmware state in FW_TRY, use alternate names.
* On exit, this routine will have set the firmware state to one of FW_TRY,
* FW_FINAL, or FW_ERR.
*
* Must be holding fw_mutex.
*/
static void __obtain_firmware(struct hfi1_devdata *dd)
{
int err = 0;
if (fw_state == FW_FINAL) /* nothing more to obtain */
return;
if (fw_state == FW_ERR) /* already in error */
return;
/* fw_state is FW_EMPTY or FW_TRY */
retry:
if (fw_state == FW_TRY) {
/*
* We tried the original and it failed. Move to the
* alternate.
*/
dd_dev_warn(dd, "using alternate firmware names\n");
/*
* Let others run. Some systems, when missing firmware, does
* something that holds for 30 seconds. If we do that twice
* in a row it triggers task blocked warning.
*/
cond_resched();
if (fw_8051_load)
dispose_one_firmware(&fw_8051);
if (fw_fabric_serdes_load)
dispose_one_firmware(&fw_fabric);
if (fw_sbus_load)
dispose_one_firmware(&fw_sbus);
if (fw_pcie_serdes_load)
dispose_one_firmware(&fw_pcie);
fw_8051_name = ALT_FW_8051_NAME_ASIC;
fw_fabric_serdes_name = ALT_FW_FABRIC_NAME;
fw_sbus_name = ALT_FW_SBUS_NAME;
fw_pcie_serdes_name = ALT_FW_PCIE_NAME;
/*
* Add a delay before obtaining and loading debug firmware.
* Authorization will fail if the delay between firmware
* authorization events is shorter than 50us. Add 100us to
* make a delay time safe.
*/
usleep_range(100, 120);
}
if (fw_sbus_load) {
err = obtain_one_firmware(dd, fw_sbus_name, &fw_sbus);
if (err)
goto done;
}
if (fw_pcie_serdes_load) {
err = obtain_one_firmware(dd, fw_pcie_serdes_name, &fw_pcie);
if (err)
goto done;
}
if (fw_fabric_serdes_load) {
err = obtain_one_firmware(dd, fw_fabric_serdes_name,
&fw_fabric);
if (err)
goto done;
}
if (fw_8051_load) {
err = obtain_one_firmware(dd, fw_8051_name, &fw_8051);
if (err)
goto done;
}
done:
if (err) {
/* oops, had problems obtaining a firmware */
if (fw_state == FW_EMPTY && dd->icode == ICODE_RTL_SILICON) {
/* retry with alternate (RTL only) */
fw_state = FW_TRY;
goto retry;
}
dd_dev_err(dd, "unable to obtain working firmware\n");
fw_state = FW_ERR;
fw_err = -ENOENT;
} else {
/* success */
if (fw_state == FW_EMPTY &&
dd->icode != ICODE_FUNCTIONAL_SIMULATOR)
fw_state = FW_TRY; /* may retry later */
else
fw_state = FW_FINAL; /* cannot try again */
}
}
/*
* Called by all HFIs when loading their firmware - i.e. device probe time.
* The first one will do the actual firmware load. Use a mutex to resolve
* any possible race condition.
*
* The call to this routine cannot be moved to driver load because the kernel
* call request_firmware() requires a device which is only available after
* the first device probe.
*/
static int obtain_firmware(struct hfi1_devdata *dd)
{
unsigned long timeout;
mutex_lock(&fw_mutex);
/* 40s delay due to long delay on missing firmware on some systems */
timeout = jiffies + msecs_to_jiffies(40000);
while (fw_state == FW_TRY) {
/*
* Another device is trying the firmware. Wait until it
* decides what works (or not).
*/
if (time_after(jiffies, timeout)) {
/* waited too long */
dd_dev_err(dd, "Timeout waiting for firmware try");
fw_state = FW_ERR;
fw_err = -ETIMEDOUT;
break;
}
mutex_unlock(&fw_mutex);
msleep(20); /* arbitrary delay */
mutex_lock(&fw_mutex);
}
/* not in FW_TRY state */
/* set fw_state to FW_TRY, FW_FINAL, or FW_ERR, and fw_err */
if (fw_state == FW_EMPTY)
__obtain_firmware(dd);
mutex_unlock(&fw_mutex);
return fw_err;
}
/*
* Called when the driver unloads. The timing is asymmetric with its
* counterpart, obtain_firmware(). If called at device remove time,
* then it is conceivable that another device could probe while the
* firmware is being disposed. The mutexes can be moved to do that
* safely, but then the firmware would be requested from the OS multiple
* times.
*
* No mutex is needed as the driver is unloading and there cannot be any
* other callers.
*/
void dispose_firmware(void)
{
dispose_one_firmware(&fw_8051);
dispose_one_firmware(&fw_fabric);
dispose_one_firmware(&fw_pcie);
dispose_one_firmware(&fw_sbus);
/* retain the error state, otherwise revert to empty */
if (fw_state != FW_ERR)
fw_state = FW_EMPTY;
}
/*
* Called with the result of a firmware download.
*
* Return 1 to retry loading the firmware, 0 to stop.
*/
static int retry_firmware(struct hfi1_devdata *dd, int load_result)
{
int retry;
mutex_lock(&fw_mutex);
if (load_result == 0) {
/*
* The load succeeded, so expect all others to do the same.
* Do not retry again.
*/
if (fw_state == FW_TRY)
fw_state = FW_FINAL;
retry = 0; /* do NOT retry */
} else if (fw_state == FW_TRY) {
/* load failed, obtain alternate firmware */
__obtain_firmware(dd);
retry = (fw_state == FW_FINAL);
} else {
/* else in FW_FINAL or FW_ERR, no retry in either case */
retry = 0;
}
mutex_unlock(&fw_mutex);
return retry;
}
/*
* Write a block of data to a given array CSR. All calls will be in
* multiples of 8 bytes.
*/
static void write_rsa_data(struct hfi1_devdata *dd, int what,
const u8 *data, int nbytes)
{
int qw_size = nbytes / 8;
int i;
if (((unsigned long)data & 0x7) == 0) {
/* aligned */
u64 *ptr = (u64 *)data;
for (i = 0; i < qw_size; i++, ptr++)
write_csr(dd, what + (8 * i), *ptr);
} else {
/* not aligned */
for (i = 0; i < qw_size; i++, data += 8) {
u64 value;
memcpy(&value, data, 8);
write_csr(dd, what + (8 * i), value);
}
}
}
/*
* Write a block of data to a given CSR as a stream of writes. All calls will
* be in multiples of 8 bytes.
*/
static void write_streamed_rsa_data(struct hfi1_devdata *dd, int what,
const u8 *data, int nbytes)
{
u64 *ptr = (u64 *)data;
int qw_size = nbytes / 8;
for (; qw_size > 0; qw_size--, ptr++)
write_csr(dd, what, *ptr);
}
/*
* Download the signature and start the RSA mechanism. Wait for
* RSA_ENGINE_TIMEOUT before giving up.
*/
static int run_rsa(struct hfi1_devdata *dd, const char *who,
const u8 *signature)
{
unsigned long timeout;
u64 reg;
u32 status;
int ret = 0;
/* write the signature */
write_rsa_data(dd, MISC_CFG_RSA_SIGNATURE, signature, KEY_SIZE);
/* initialize RSA */
write_csr(dd, MISC_CFG_RSA_CMD, RSA_CMD_INIT);
/*
* Make sure the engine is idle and insert a delay between the two
* writes to MISC_CFG_RSA_CMD.
*/
status = (read_csr(dd, MISC_CFG_FW_CTRL)
& MISC_CFG_FW_CTRL_RSA_STATUS_SMASK)
>> MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT;
if (status != RSA_STATUS_IDLE) {
dd_dev_err(dd, "%s security engine not idle - giving up\n",
who);
return -EBUSY;
}
/* start RSA */
write_csr(dd, MISC_CFG_RSA_CMD, RSA_CMD_START);
/*
* Look for the result.
*
* The RSA engine is hooked up to two MISC errors. The driver
* masks these errors as they do not respond to the standard
* error "clear down" mechanism. Look for these errors here and
* clear them when possible. This routine will exit with the
* errors of the current run still set.
*
* MISC_FW_AUTH_FAILED_ERR
* Firmware authorization failed. This can be cleared by
* re-initializing the RSA engine, then clearing the status bit.
* Do not re-init the RSA angine immediately after a successful
* run - this will reset the current authorization.
*
* MISC_KEY_MISMATCH_ERR
* Key does not match. The only way to clear this is to load
* a matching key then clear the status bit. If this error
* is raised, it will persist outside of this routine until a
* matching key is loaded.
*/
timeout = msecs_to_jiffies(RSA_ENGINE_TIMEOUT) + jiffies;
while (1) {
status = (read_csr(dd, MISC_CFG_FW_CTRL)
& MISC_CFG_FW_CTRL_RSA_STATUS_SMASK)
>> MISC_CFG_FW_CTRL_RSA_STATUS_SHIFT;
if (status == RSA_STATUS_IDLE) {
/* should not happen */
dd_dev_err(dd, "%s firmware security bad idle state\n",
who);
ret = -EINVAL;
break;
} else if (status == RSA_STATUS_DONE) {
/* finished successfully */
break;
} else if (status == RSA_STATUS_FAILED) {
/* finished unsuccessfully */
ret = -EINVAL;
break;
}
/* else still active */
if (time_after(jiffies, timeout)) {
/*
* Timed out while active. We can't reset the engine
* if it is stuck active, but run through the
* error code to see what error bits are set.
*/
dd_dev_err(dd, "%s firmware security time out\n", who);
ret = -ETIMEDOUT;
break;
}
msleep(20);
}
/*
* Arrive here on success or failure. Clear all RSA engine
* errors. All current errors will stick - the RSA logic is keeping
* error high. All previous errors will clear - the RSA logic
* is not keeping the error high.
*/
write_csr(dd, MISC_ERR_CLEAR,
MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK |
MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK);
/*
* All that is left are the current errors. Print warnings on
* authorization failure details, if any. Firmware authorization
* can be retried, so these are only warnings.
*/
reg = read_csr(dd, MISC_ERR_STATUS);
if (ret) {
if (reg & MISC_ERR_STATUS_MISC_FW_AUTH_FAILED_ERR_SMASK)
dd_dev_warn(dd, "%s firmware authorization failed\n",
who);
if (reg & MISC_ERR_STATUS_MISC_KEY_MISMATCH_ERR_SMASK)
dd_dev_warn(dd, "%s firmware key mismatch\n", who);
}
return ret;
}
static void load_security_variables(struct hfi1_devdata *dd,
struct firmware_details *fdet)
{
/* Security variables a. Write the modulus */
write_rsa_data(dd, MISC_CFG_RSA_MODULUS, fdet->modulus, KEY_SIZE);
/* Security variables b. Write the r2 */
write_rsa_data(dd, MISC_CFG_RSA_R2, fdet->r2, KEY_SIZE);
/* Security variables c. Write the mu */
write_rsa_data(dd, MISC_CFG_RSA_MU, fdet->mu, MU_SIZE);
/* Security variables d. Write the header */
write_streamed_rsa_data(dd, MISC_CFG_SHA_PRELOAD,
(u8 *)fdet->css_header,
sizeof(struct css_header));
}
/* return the 8051 firmware state */
static inline u32 get_firmware_state(struct hfi1_devdata *dd)
{
u64 reg = read_csr(dd, DC_DC8051_STS_CUR_STATE);
return (reg >> DC_DC8051_STS_CUR_STATE_FIRMWARE_SHIFT)
& DC_DC8051_STS_CUR_STATE_FIRMWARE_MASK;
}
/*
* Wait until the firmware is up and ready to take host requests.
* Return 0 on success, -ETIMEDOUT on timeout.
*/
int wait_fm_ready(struct hfi1_devdata *dd, u32 mstimeout)
{
unsigned long timeout;
/* in the simulator, the fake 8051 is always ready */
if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR)
return 0;
timeout = msecs_to_jiffies(mstimeout) + jiffies;
while (1) {
if (get_firmware_state(dd) == 0xa0) /* ready */
return 0;
if (time_after(jiffies, timeout)) /* timed out */
return -ETIMEDOUT;
usleep_range(1950, 2050); /* sleep 2ms-ish */
}
}
/*
* Load the 8051 firmware.
*/
static int load_8051_firmware(struct hfi1_devdata *dd,
struct firmware_details *fdet)
{
u64 reg;
int ret;
u8 ver_major;
u8 ver_minor;
u8 ver_patch;
/*
* DC Reset sequence
* Load DC 8051 firmware
*/
/*
* DC reset step 1: Reset DC8051
*/
reg = DC_DC8051_CFG_RST_M8051W_SMASK
| DC_DC8051_CFG_RST_CRAM_SMASK
| DC_DC8051_CFG_RST_DRAM_SMASK
| DC_DC8051_CFG_RST_IRAM_SMASK
| DC_DC8051_CFG_RST_SFR_SMASK;
write_csr(dd, DC_DC8051_CFG_RST, reg);
/*
* DC reset step 2 (optional): Load 8051 data memory with link
* configuration
*/
/*
* DC reset step 3: Load DC8051 firmware
*/
/* release all but the core reset */
reg = DC_DC8051_CFG_RST_M8051W_SMASK;
write_csr(dd, DC_DC8051_CFG_RST, reg);
/* Firmware load step 1 */
load_security_variables(dd, fdet);
/*
* Firmware load step 2. Clear MISC_CFG_FW_CTRL.FW_8051_LOADED
*/
write_csr(dd, MISC_CFG_FW_CTRL, 0);
/* Firmware load steps 3-5 */
ret = write_8051(dd, 1/*code*/, 0, fdet->firmware_ptr,
fdet->firmware_len);
if (ret)
return ret;
/*
* DC reset step 4. Host starts the DC8051 firmware
*/
/*
* Firmware load step 6. Set MISC_CFG_FW_CTRL.FW_8051_LOADED
*/
write_csr(dd, MISC_CFG_FW_CTRL, MISC_CFG_FW_CTRL_FW_8051_LOADED_SMASK);
/* Firmware load steps 7-10 */
ret = run_rsa(dd, "8051", fdet->signature);
if (ret)
return ret;
/* clear all reset bits, releasing the 8051 */
write_csr(dd, DC_DC8051_CFG_RST, 0ull);
/*
* DC reset step 5. Wait for firmware to be ready to accept host
* requests.
*/
ret = wait_fm_ready(dd, TIMEOUT_8051_START);
if (ret) { /* timed out */
dd_dev_err(dd, "8051 start timeout, current state 0x%x\n",
get_firmware_state(dd));
return -ETIMEDOUT;
}
read_misc_status(dd, &ver_major, &ver_minor, &ver_patch);
dd_dev_info(dd, "8051 firmware version %d.%d.%d\n",
(int)ver_major, (int)ver_minor, (int)ver_patch);
dd->dc8051_ver = dc8051_ver(ver_major, ver_minor, ver_patch);
ret = write_host_interface_version(dd, HOST_INTERFACE_VERSION);
if (ret != HCMD_SUCCESS) {
dd_dev_err(dd,
"Failed to set host interface version, return 0x%x\n",
ret);
return -EIO;
}
return 0;
}
/*
* Write the SBus request register
*
* No need for masking - the arguments are sized exactly.
*/
void sbus_request(struct hfi1_devdata *dd,
u8 receiver_addr, u8 data_addr, u8 command, u32 data_in)
{
write_csr(dd, ASIC_CFG_SBUS_REQUEST,
((u64)data_in << ASIC_CFG_SBUS_REQUEST_DATA_IN_SHIFT) |
((u64)command << ASIC_CFG_SBUS_REQUEST_COMMAND_SHIFT) |
((u64)data_addr << ASIC_CFG_SBUS_REQUEST_DATA_ADDR_SHIFT) |
((u64)receiver_addr <<
ASIC_CFG_SBUS_REQUEST_RECEIVER_ADDR_SHIFT));
}
/*
* Read a value from the SBus.
*
* Requires the caller to be in fast mode
*/
static u32 sbus_read(struct hfi1_devdata *dd, u8 receiver_addr, u8 data_addr,
u32 data_in)
{
u64 reg;
int retries;
int success = 0;
u32 result = 0;
u32 result_code = 0;
sbus_request(dd, receiver_addr, data_addr, READ_SBUS_RECEIVER, data_in);
for (retries = 0; retries < 100; retries++) {
usleep_range(1000, 1200); /* arbitrary */
reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
result_code = (reg >> ASIC_STS_SBUS_RESULT_RESULT_CODE_SHIFT)
& ASIC_STS_SBUS_RESULT_RESULT_CODE_MASK;
if (result_code != SBUS_READ_COMPLETE)
continue;
success = 1;
result = (reg >> ASIC_STS_SBUS_RESULT_DATA_OUT_SHIFT)
& ASIC_STS_SBUS_RESULT_DATA_OUT_MASK;
break;
}
if (!success) {
dd_dev_err(dd, "%s: read failed, result code 0x%x\n", __func__,
result_code);
}
return result;
}
/*
* Turn off the SBus and fabric serdes spicos.
*
* + Must be called with Sbus fast mode turned on.
* + Must be called after fabric serdes broadcast is set up.
* + Must be called before the 8051 is loaded - assumes 8051 is not loaded
* when using MISC_CFG_FW_CTRL.
*/
static void turn_off_spicos(struct hfi1_devdata *dd, int flags)
{
/* only needed on A0 */
if (!is_ax(dd))
return;
dd_dev_info(dd, "Turning off spicos:%s%s\n",
flags & SPICO_SBUS ? " SBus" : "",
flags & SPICO_FABRIC ? " fabric" : "");
write_csr(dd, MISC_CFG_FW_CTRL, ENABLE_SPICO_SMASK);
/* disable SBus spico */
if (flags & SPICO_SBUS)
sbus_request(dd, SBUS_MASTER_BROADCAST, 0x01,
WRITE_SBUS_RECEIVER, 0x00000040);
/* disable the fabric serdes spicos */
if (flags & SPICO_FABRIC)
sbus_request(dd, fabric_serdes_broadcast[dd->hfi1_id],
0x07, WRITE_SBUS_RECEIVER, 0x00000000);
write_csr(dd, MISC_CFG_FW_CTRL, 0);
}
/*
* Reset all of the fabric serdes for this HFI in preparation to take the
* link to Polling.
*
* To do a reset, we need to write to to the serdes registers. Unfortunately,
* the fabric serdes download to the other HFI on the ASIC will have turned
* off the firmware validation on this HFI. This means we can't write to the
* registers to reset the serdes. Work around this by performing a complete
* re-download and validation of the fabric serdes firmware. This, as a
* by-product, will reset the serdes. NOTE: the re-download requires that
* the 8051 be in the Offline state. I.e. not actively trying to use the
* serdes. This routine is called at the point where the link is Offline and
* is getting ready to go to Polling.
*/
void fabric_serdes_reset(struct hfi1_devdata *dd)
{
int ret;
if (!fw_fabric_serdes_load)
return;
ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT);
if (ret) {
dd_dev_err(dd,
"Cannot acquire SBus resource to reset fabric SerDes - perhaps you should reboot\n");
return;
}
set_sbus_fast_mode(dd);
if (is_ax(dd)) {
/* A0 serdes do not work with a re-download */
u8 ra = fabric_serdes_broadcast[dd->hfi1_id];
/* place SerDes in reset and disable SPICO */
sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011);
/* wait 100 refclk cycles @ 156.25MHz => 640ns */
udelay(1);
/* remove SerDes reset */
sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010);
/* turn SPICO enable on */
sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002);
} else {
turn_off_spicos(dd, SPICO_FABRIC);
/*
* No need for firmware retry - what to download has already
* been decided.
* No need to pay attention to the load return - the only
* failure is a validation failure, which has already been
* checked by the initial download.
*/
(void)load_fabric_serdes_firmware(dd, &fw_fabric);
}
clear_sbus_fast_mode(dd);
release_chip_resource(dd, CR_SBUS);
}
/* Access to the SBus in this routine should probably be serialized */
int sbus_request_slow(struct hfi1_devdata *dd,
u8 receiver_addr, u8 data_addr, u8 command, u32 data_in)
{
u64 reg, count = 0;
/* make sure fast mode is clear */
clear_sbus_fast_mode(dd);
sbus_request(dd, receiver_addr, data_addr, command, data_in);
write_csr(dd, ASIC_CFG_SBUS_EXECUTE,
ASIC_CFG_SBUS_EXECUTE_EXECUTE_SMASK);
/* Wait for both DONE and RCV_DATA_VALID to go high */
reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
while (!((reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) &&
(reg & ASIC_STS_SBUS_RESULT_RCV_DATA_VALID_SMASK))) {
if (count++ >= SBUS_MAX_POLL_COUNT) {
u64 counts = read_csr(dd, ASIC_STS_SBUS_COUNTERS);
/*
* If the loop has timed out, we are OK if DONE bit
* is set and RCV_DATA_VALID and EXECUTE counters
* are the same. If not, we cannot proceed.
*/
if ((reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) &&
(SBUS_COUNTER(counts, RCV_DATA_VALID) ==
SBUS_COUNTER(counts, EXECUTE)))
break;
return -ETIMEDOUT;
}
udelay(1);
reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
}
count = 0;
write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0);
/* Wait for DONE to clear after EXECUTE is cleared */
reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
while (reg & ASIC_STS_SBUS_RESULT_DONE_SMASK) {
if (count++ >= SBUS_MAX_POLL_COUNT)
return -ETIME;
udelay(1);
reg = read_csr(dd, ASIC_STS_SBUS_RESULT);
}
return 0;
}
static int load_fabric_serdes_firmware(struct hfi1_devdata *dd,
struct firmware_details *fdet)
{
int i, err;
const u8 ra = fabric_serdes_broadcast[dd->hfi1_id]; /* receiver addr */
dd_dev_info(dd, "Downloading fabric firmware\n");
/* step 1: load security variables */
load_security_variables(dd, fdet);
/* step 2: place SerDes in reset and disable SPICO */
sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000011);
/* wait 100 refclk cycles @ 156.25MHz => 640ns */
udelay(1);
/* step 3: remove SerDes reset */
sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000010);
/* step 4: assert IMEM override */
sbus_request(dd, ra, 0x00, WRITE_SBUS_RECEIVER, 0x40000000);
/* step 5: download SerDes machine code */
for (i = 0; i < fdet->firmware_len; i += 4) {
sbus_request(dd, ra, 0x0a, WRITE_SBUS_RECEIVER,
*(u32 *)&fdet->firmware_ptr[i]);
}
/* step 6: IMEM override off */
sbus_request(dd, ra, 0x00, WRITE_SBUS_RECEIVER, 0x00000000);
/* step 7: turn ECC on */
sbus_request(dd, ra, 0x0b, WRITE_SBUS_RECEIVER, 0x000c0000);
/* steps 8-11: run the RSA engine */
err = run_rsa(dd, "fabric serdes", fdet->signature);
if (err)
return err;
/* step 12: turn SPICO enable on */
sbus_request(dd, ra, 0x07, WRITE_SBUS_RECEIVER, 0x00000002);
/* step 13: enable core hardware interrupts */
sbus_request(dd, ra, 0x08, WRITE_SBUS_RECEIVER, 0x00000000);
return 0;
}
static int load_sbus_firmware(struct hfi1_devdata *dd,
struct firmware_details *fdet)
{
int i, err;
const u8 ra = SBUS_MASTER_BROADCAST; /* receiver address */
dd_dev_info(dd, "Downloading SBus firmware\n");
/* step 1: load security variables */
load_security_variables(dd, fdet);
/* step 2: place SPICO into reset and enable off */
sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x000000c0);
/* step 3: remove reset, enable off, IMEM_CNTRL_EN on */
sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000240);
/* step 4: set starting IMEM address for burst download */
sbus_request(dd, ra, 0x03, WRITE_SBUS_RECEIVER, 0x80000000);
/* step 5: download the SBus Master machine code */
for (i = 0; i < fdet->firmware_len; i += 4) {
sbus_request(dd, ra, 0x14, WRITE_SBUS_RECEIVER,
*(u32 *)&fdet->firmware_ptr[i]);
}
/* step 6: set IMEM_CNTL_EN off */
sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000040);
/* step 7: turn ECC on */
sbus_request(dd, ra, 0x16, WRITE_SBUS_RECEIVER, 0x000c0000);
/* steps 8-11: run the RSA engine */
err = run_rsa(dd, "SBus", fdet->signature);
if (err)
return err;
/* step 12: set SPICO_ENABLE on */
sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000140);
return 0;
}
static int load_pcie_serdes_firmware(struct hfi1_devdata *dd,
struct firmware_details *fdet)
{
int i;
const u8 ra = SBUS_MASTER_BROADCAST; /* receiver address */
dd_dev_info(dd, "Downloading PCIe firmware\n");
/* step 1: load security variables */
load_security_variables(dd, fdet);
/* step 2: assert single step (halts the SBus Master spico) */
sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000001);
/* step 3: enable XDMEM access */
sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000d40);
/* step 4: load firmware into SBus Master XDMEM */
/*
* NOTE: the dmem address, write_en, and wdata are all pre-packed,
* we only need to pick up the bytes and write them
*/
for (i = 0; i < fdet->firmware_len; i += 4) {
sbus_request(dd, ra, 0x04, WRITE_SBUS_RECEIVER,
*(u32 *)&fdet->firmware_ptr[i]);
}
/* step 5: disable XDMEM access */
sbus_request(dd, ra, 0x01, WRITE_SBUS_RECEIVER, 0x00000140);
/* step 6: allow SBus Spico to run */
sbus_request(dd, ra, 0x05, WRITE_SBUS_RECEIVER, 0x00000000);
/*
* steps 7-11: run RSA, if it succeeds, firmware is available to
* be swapped
*/
return run_rsa(dd, "PCIe serdes", fdet->signature);
}
/*
* Set the given broadcast values on the given list of devices.
*/
static void set_serdes_broadcast(struct hfi1_devdata *dd, u8 bg1, u8 bg2,
const u8 *addrs, int count)
{
while (--count >= 0) {
/*
* Set BROADCAST_GROUP_1 and BROADCAST_GROUP_2, leave
* defaults for everything else. Do not read-modify-write,
* per instruction from the manufacturer.
*
* Register 0xfd:
* bits what
* ----- ---------------------------------
* 0 IGNORE_BROADCAST (default 0)
* 11:4 BROADCAST_GROUP_1 (default 0xff)
* 23:16 BROADCAST_GROUP_2 (default 0xff)
*/
sbus_request(dd, addrs[count], 0xfd, WRITE_SBUS_RECEIVER,
(u32)bg1 << 4 | (u32)bg2 << 16);
}
}
int acquire_hw_mutex(struct hfi1_devdata *dd)
{
unsigned long timeout;
int try = 0;
u8 mask = 1 << dd->hfi1_id;
u8 user = (u8)read_csr(dd, ASIC_CFG_MUTEX);
if (user == mask) {
dd_dev_info(dd,
"Hardware mutex already acquired, mutex mask %u\n",
(u32)mask);
return 0;
}
retry:
timeout = msecs_to_jiffies(HM_TIMEOUT) + jiffies;
while (1) {
write_csr(dd, ASIC_CFG_MUTEX, mask);
user = (u8)read_csr(dd, ASIC_CFG_MUTEX);
if (user == mask)
return 0; /* success */
if (time_after(jiffies, timeout))
break; /* timed out */
msleep(20);
}
/* timed out */
dd_dev_err(dd,
"Unable to acquire hardware mutex, mutex mask %u, my mask %u (%s)\n",
(u32)user, (u32)mask, (try == 0) ? "retrying" : "giving up");
if (try == 0) {
/* break mutex and retry */
write_csr(dd, ASIC_CFG_MUTEX, 0);
try++;
goto retry;
}
return -EBUSY;
}
void release_hw_mutex(struct hfi1_devdata *dd)
{
u8 mask = 1 << dd->hfi1_id;
u8 user = (u8)read_csr(dd, ASIC_CFG_MUTEX);
if (user != mask)
dd_dev_warn(dd,
"Unable to release hardware mutex, mutex mask %u, my mask %u\n",
(u32)user, (u32)mask);
else
write_csr(dd, ASIC_CFG_MUTEX, 0);
}
/* return the given resource bit(s) as a mask for the given HFI */
static inline u64 resource_mask(u32 hfi1_id, u32 resource)
{
return ((u64)resource) << (hfi1_id ? CR_DYN_SHIFT : 0);
}
static void fail_mutex_acquire_message(struct hfi1_devdata *dd,
const char *func)
{
dd_dev_err(dd,
"%s: hardware mutex stuck - suggest rebooting the machine\n",
func);
}
/*
* Acquire access to a chip resource.
*
* Return 0 on success, -EBUSY if resource busy, -EIO if mutex acquire failed.
*/
static int __acquire_chip_resource(struct hfi1_devdata *dd, u32 resource)
{
u64 scratch0, all_bits, my_bit;
int ret;
if (resource & CR_DYN_MASK) {
/* a dynamic resource is in use if either HFI has set the bit */
if (dd->pcidev->device == PCI_DEVICE_ID_INTEL0 &&
(resource & (CR_I2C1 | CR_I2C2))) {
/* discrete devices must serialize across both chains */
all_bits = resource_mask(0, CR_I2C1 | CR_I2C2) |
resource_mask(1, CR_I2C1 | CR_I2C2);
} else {
all_bits = resource_mask(0, resource) |
resource_mask(1, resource);
}
my_bit = resource_mask(dd->hfi1_id, resource);
} else {
/* non-dynamic resources are not split between HFIs */
all_bits = resource;
my_bit = resource;
}
/* lock against other callers within the driver wanting a resource */
mutex_lock(&dd->asic_data->asic_resource_mutex);
ret = acquire_hw_mutex(dd);
if (ret) {
fail_mutex_acquire_message(dd, __func__);
ret = -EIO;
goto done;
}
scratch0 = read_csr(dd, ASIC_CFG_SCRATCH);
if (scratch0 & all_bits) {
ret = -EBUSY;
} else {
write_csr(dd, ASIC_CFG_SCRATCH, scratch0 | my_bit);
/* force write to be visible to other HFI on another OS */
(void)read_csr(dd, ASIC_CFG_SCRATCH);
}
release_hw_mutex(dd);
done:
mutex_unlock(&dd->asic_data->asic_resource_mutex);
return ret;
}
/*
* Acquire access to a chip resource, wait up to mswait milliseconds for
* the resource to become available.
*
* Return 0 on success, -EBUSY if busy (even after wait), -EIO if mutex
* acquire failed.
*/
int acquire_chip_resource(struct hfi1_devdata *dd, u32 resource, u32 mswait)
{
unsigned long timeout;
int ret;
timeout = jiffies + msecs_to_jiffies(mswait);
while (1) {
ret = __acquire_chip_resource(dd, resource);
if (ret != -EBUSY)
return ret;
/* resource is busy, check our timeout */
if (time_after_eq(jiffies, timeout))
return -EBUSY;
usleep_range(80, 120); /* arbitrary delay */
}
}
/*
* Release access to a chip resource
*/
void release_chip_resource(struct hfi1_devdata *dd, u32 resource)
{
u64 scratch0, bit;
/* only dynamic resources should ever be cleared */
if (!(resource & CR_DYN_MASK)) {
dd_dev_err(dd, "%s: invalid resource 0x%x\n", __func__,
resource);
return;
}
bit = resource_mask(dd->hfi1_id, resource);
/* lock against other callers within the driver wanting a resource */
mutex_lock(&dd->asic_data->asic_resource_mutex);
if (acquire_hw_mutex(dd)) {
fail_mutex_acquire_message(dd, __func__);
goto done;
}
scratch0 = read_csr(dd, ASIC_CFG_SCRATCH);
if ((scratch0 & bit) != 0) {
scratch0 &= ~bit;
write_csr(dd, ASIC_CFG_SCRATCH, scratch0);
/* force write to be visible to other HFI on another OS */
(void)read_csr(dd, ASIC_CFG_SCRATCH);
} else {
dd_dev_warn(dd, "%s: id %d, resource 0x%x: bit not set\n",
__func__, dd->hfi1_id, resource);
}
release_hw_mutex(dd);
done:
mutex_unlock(&dd->asic_data->asic_resource_mutex);
}
/*
* Return true if resource is set, false otherwise. Print a warning
* if not set and a function is supplied.
*/
bool check_chip_resource(struct hfi1_devdata *dd, u32 resource,
const char *func)
{
u64 scratch0, bit;
if (resource & CR_DYN_MASK)
bit = resource_mask(dd->hfi1_id, resource);
else
bit = resource;
scratch0 = read_csr(dd, ASIC_CFG_SCRATCH);
if ((scratch0 & bit) == 0) {
if (func)
dd_dev_warn(dd,
"%s: id %d, resource 0x%x, not acquired!\n",
func, dd->hfi1_id, resource);
return false;
}
return true;
}
static void clear_chip_resources(struct hfi1_devdata *dd, const char *func)
{
u64 scratch0;
/* lock against other callers within the driver wanting a resource */
mutex_lock(&dd->asic_data->asic_resource_mutex);
if (acquire_hw_mutex(dd)) {
fail_mutex_acquire_message(dd, func);
goto done;
}
/* clear all dynamic access bits for this HFI */
scratch0 = read_csr(dd, ASIC_CFG_SCRATCH);
scratch0 &= ~resource_mask(dd->hfi1_id, CR_DYN_MASK);
write_csr(dd, ASIC_CFG_SCRATCH, scratch0);
/* force write to be visible to other HFI on another OS */
(void)read_csr(dd, ASIC_CFG_SCRATCH);
release_hw_mutex(dd);
done:
mutex_unlock(&dd->asic_data->asic_resource_mutex);
}
void init_chip_resources(struct hfi1_devdata *dd)
{
/* clear any holds left by us */
clear_chip_resources(dd, __func__);
}
void finish_chip_resources(struct hfi1_devdata *dd)
{
/* clear any holds left by us */
clear_chip_resources(dd, __func__);
}
void set_sbus_fast_mode(struct hfi1_devdata *dd)
{
write_csr(dd, ASIC_CFG_SBUS_EXECUTE,
ASIC_CFG_SBUS_EXECUTE_FAST_MODE_SMASK);
}
void clear_sbus_fast_mode(struct hfi1_devdata *dd)
{
u64 reg, count = 0;
reg = read_csr(dd, ASIC_STS_SBUS_COUNTERS);
while (SBUS_COUNTER(reg, EXECUTE) !=
SBUS_COUNTER(reg, RCV_DATA_VALID)) {
if (count++ >= SBUS_MAX_POLL_COUNT)
break;
udelay(1);
reg = read_csr(dd, ASIC_STS_SBUS_COUNTERS);
}
write_csr(dd, ASIC_CFG_SBUS_EXECUTE, 0);
}
int load_firmware(struct hfi1_devdata *dd)
{
int ret;
if (fw_fabric_serdes_load) {
ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT);
if (ret)
return ret;
set_sbus_fast_mode(dd);
set_serdes_broadcast(dd, all_fabric_serdes_broadcast,
fabric_serdes_broadcast[dd->hfi1_id],
fabric_serdes_addrs[dd->hfi1_id],
NUM_FABRIC_SERDES);
turn_off_spicos(dd, SPICO_FABRIC);
do {
ret = load_fabric_serdes_firmware(dd, &fw_fabric);
} while (retry_firmware(dd, ret));
clear_sbus_fast_mode(dd);
release_chip_resource(dd, CR_SBUS);
if (ret)
return ret;
}
if (fw_8051_load) {
do {
ret = load_8051_firmware(dd, &fw_8051);
} while (retry_firmware(dd, ret));
if (ret)
return ret;
}
dump_fw_version(dd);
return 0;
}
int hfi1_firmware_init(struct hfi1_devdata *dd)
{
/* only RTL can use these */
if (dd->icode != ICODE_RTL_SILICON) {
fw_fabric_serdes_load = 0;
fw_pcie_serdes_load = 0;
fw_sbus_load = 0;
}
/* no 8051 or QSFP on simulator */
if (dd->icode == ICODE_FUNCTIONAL_SIMULATOR)
fw_8051_load = 0;
if (!fw_8051_name) {
if (dd->icode == ICODE_RTL_SILICON)
fw_8051_name = DEFAULT_FW_8051_NAME_ASIC;
else
fw_8051_name = DEFAULT_FW_8051_NAME_FPGA;
}
if (!fw_fabric_serdes_name)
fw_fabric_serdes_name = DEFAULT_FW_FABRIC_NAME;
if (!fw_sbus_name)
fw_sbus_name = DEFAULT_FW_SBUS_NAME;
if (!fw_pcie_serdes_name)
fw_pcie_serdes_name = DEFAULT_FW_PCIE_NAME;
return obtain_firmware(dd);
}
/*
* This function is a helper function for parse_platform_config(...) and
* does not check for validity of the platform configuration cache
* (because we know it is invalid as we are building up the cache).
* As such, this should not be called from anywhere other than
* parse_platform_config
*/
static int check_meta_version(struct hfi1_devdata *dd, u32 *system_table)
{
u32 meta_ver, meta_ver_meta, ver_start, ver_len, mask;
struct platform_config_cache *pcfgcache = &dd->pcfg_cache;
if (!system_table)
return -EINVAL;
meta_ver_meta =
*(pcfgcache->config_tables[PLATFORM_CONFIG_SYSTEM_TABLE].table_metadata
+ SYSTEM_TABLE_META_VERSION);
mask = ((1 << METADATA_TABLE_FIELD_START_LEN_BITS) - 1);
ver_start = meta_ver_meta & mask;
meta_ver_meta >>= METADATA_TABLE_FIELD_LEN_SHIFT;
mask = ((1 << METADATA_TABLE_FIELD_LEN_LEN_BITS) - 1);
ver_len = meta_ver_meta & mask;
ver_start /= 8;
meta_ver = *((u8 *)system_table + ver_start) & ((1 << ver_len) - 1);
if (meta_ver < 4) {
dd_dev_info(
dd, "%s:Please update platform config\n", __func__);
return -EINVAL;
}
return 0;
}
int parse_platform_config(struct hfi1_devdata *dd)
{
struct platform_config_cache *pcfgcache = &dd->pcfg_cache;
struct hfi1_pportdata *ppd = dd->pport;
u32 *ptr = NULL;
u32 header1 = 0, header2 = 0, magic_num = 0, crc = 0, file_length = 0;
u32 record_idx = 0, table_type = 0, table_length_dwords = 0;
int ret = -EINVAL; /* assume failure */
/*
* For integrated devices that did not fall back to the default file,
* the SI tuning information for active channels is acquired from the
* scratch register bitmap, thus there is no platform config to parse.
* Skip parsing in these situations.
*/
if (ppd->config_from_scratch)
return 0;
if (!dd->platform_config.data) {
dd_dev_err(dd, "%s: Missing config file\n", __func__);
goto bail;
}
ptr = (u32 *)dd->platform_config.data;
magic_num = *ptr;
ptr++;
if (magic_num != PLATFORM_CONFIG_MAGIC_NUM) {
dd_dev_err(dd, "%s: Bad config file\n", __func__);
goto bail;
}
/* Field is file size in DWORDs */
file_length = (*ptr) * 4;
/*
* Length can't be larger than partition size. Assume platform
* config format version 4 is being used. Interpret the file size
* field as header instead by not moving the pointer.
*/
if (file_length > MAX_PLATFORM_CONFIG_FILE_SIZE) {
dd_dev_info(dd,
"%s:File length out of bounds, using alternative format\n",
__func__);
file_length = PLATFORM_CONFIG_FORMAT_4_FILE_SIZE;
} else {
ptr++;
}
if (file_length > dd->platform_config.size) {
dd_dev_info(dd, "%s:File claims to be larger than read size\n",
__func__);
goto bail;
} else if (file_length < dd->platform_config.size) {
dd_dev_info(dd,
"%s:File claims to be smaller than read size, continuing\n",
__func__);
}
/* exactly equal, perfection */
/*
* In both cases where we proceed, using the self-reported file length
* is the safer option. In case of old format a predefined value is
* being used.
*/
while (ptr < (u32 *)(dd->platform_config.data + file_length)) {
header1 = *ptr;
header2 = *(ptr + 1);
if (header1 != ~header2) {
dd_dev_err(dd, "%s: Failed validation at offset %ld\n",
__func__, (ptr - (u32 *)
dd->platform_config.data));
goto bail;
}
record_idx = *ptr &
((1 << PLATFORM_CONFIG_HEADER_RECORD_IDX_LEN_BITS) - 1);
table_length_dwords = (*ptr >>
PLATFORM_CONFIG_HEADER_TABLE_LENGTH_SHIFT) &
((1 << PLATFORM_CONFIG_HEADER_TABLE_LENGTH_LEN_BITS) - 1);
table_type = (*ptr >> PLATFORM_CONFIG_HEADER_TABLE_TYPE_SHIFT) &
((1 << PLATFORM_CONFIG_HEADER_TABLE_TYPE_LEN_BITS) - 1);
/* Done with this set of headers */
ptr += 2;
if (record_idx) {
/* data table */
switch (table_type) {
case PLATFORM_CONFIG_SYSTEM_TABLE:
pcfgcache->config_tables[table_type].num_table =
1;
ret = check_meta_version(dd, ptr);
if (ret)
goto bail;
break;
case PLATFORM_CONFIG_PORT_TABLE:
pcfgcache->config_tables[table_type].num_table =
2;
break;
case PLATFORM_CONFIG_RX_PRESET_TABLE:
/* fall through */
case PLATFORM_CONFIG_TX_PRESET_TABLE:
/* fall through */
case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
/* fall through */
case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
pcfgcache->config_tables[table_type].num_table =
table_length_dwords;
break;
default:
dd_dev_err(dd,
"%s: Unknown data table %d, offset %ld\n",
__func__, table_type,
(ptr - (u32 *)
dd->platform_config.data));
goto bail; /* We don't trust this file now */
}
pcfgcache->config_tables[table_type].table = ptr;
} else {
/* metadata table */
switch (table_type) {
case PLATFORM_CONFIG_SYSTEM_TABLE:
/* fall through */
case PLATFORM_CONFIG_PORT_TABLE:
/* fall through */
case PLATFORM_CONFIG_RX_PRESET_TABLE:
/* fall through */
case PLATFORM_CONFIG_TX_PRESET_TABLE:
/* fall through */
case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
/* fall through */
case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
break;
default:
dd_dev_err(dd,
"%s: Unknown meta table %d, offset %ld\n",
__func__, table_type,
(ptr -
(u32 *)dd->platform_config.data));
goto bail; /* We don't trust this file now */
}
pcfgcache->config_tables[table_type].table_metadata =
ptr;
}
/* Calculate and check table crc */
crc = crc32_le(~(u32)0, (unsigned char const *)ptr,
(table_length_dwords * 4));
crc ^= ~(u32)0;
/* Jump the table */
ptr += table_length_dwords;
if (crc != *ptr) {
dd_dev_err(dd, "%s: Failed CRC check at offset %ld\n",
__func__, (ptr -
(u32 *)dd->platform_config.data));
goto bail;
}
/* Jump the CRC DWORD */
ptr++;
}
pcfgcache->cache_valid = 1;
return 0;
bail:
memset(pcfgcache, 0, sizeof(struct platform_config_cache));
return ret;
}
static void get_integrated_platform_config_field(
struct hfi1_devdata *dd,
enum platform_config_table_type_encoding table_type,
int field_index, u32 *data)
{
struct hfi1_pportdata *ppd = dd->pport;
u8 *cache = ppd->qsfp_info.cache;
u32 tx_preset = 0;
switch (table_type) {
case PLATFORM_CONFIG_SYSTEM_TABLE:
if (field_index == SYSTEM_TABLE_QSFP_POWER_CLASS_MAX)
*data = ppd->max_power_class;
else if (field_index == SYSTEM_TABLE_QSFP_ATTENUATION_DEFAULT_25G)
*data = ppd->default_atten;
break;
case PLATFORM_CONFIG_PORT_TABLE:
if (field_index == PORT_TABLE_PORT_TYPE)
*data = ppd->port_type;
else if (field_index == PORT_TABLE_LOCAL_ATTEN_25G)
*data = ppd->local_atten;
else if (field_index == PORT_TABLE_REMOTE_ATTEN_25G)
*data = ppd->remote_atten;
break;
case PLATFORM_CONFIG_RX_PRESET_TABLE:
if (field_index == RX_PRESET_TABLE_QSFP_RX_CDR_APPLY)
*data = (ppd->rx_preset & QSFP_RX_CDR_APPLY_SMASK) >>
QSFP_RX_CDR_APPLY_SHIFT;
else if (field_index == RX_PRESET_TABLE_QSFP_RX_EMP_APPLY)
*data = (ppd->rx_preset & QSFP_RX_EMP_APPLY_SMASK) >>
QSFP_RX_EMP_APPLY_SHIFT;
else if (field_index == RX_PRESET_TABLE_QSFP_RX_AMP_APPLY)
*data = (ppd->rx_preset & QSFP_RX_AMP_APPLY_SMASK) >>
QSFP_RX_AMP_APPLY_SHIFT;
else if (field_index == RX_PRESET_TABLE_QSFP_RX_CDR)
*data = (ppd->rx_preset & QSFP_RX_CDR_SMASK) >>
QSFP_RX_CDR_SHIFT;
else if (field_index == RX_PRESET_TABLE_QSFP_RX_EMP)
*data = (ppd->rx_preset & QSFP_RX_EMP_SMASK) >>
QSFP_RX_EMP_SHIFT;
else if (field_index == RX_PRESET_TABLE_QSFP_RX_AMP)
*data = (ppd->rx_preset & QSFP_RX_AMP_SMASK) >>
QSFP_RX_AMP_SHIFT;
break;
case PLATFORM_CONFIG_TX_PRESET_TABLE:
if (cache[QSFP_EQ_INFO_OFFS] & 0x4)
tx_preset = ppd->tx_preset_eq;
else
tx_preset = ppd->tx_preset_noeq;
if (field_index == TX_PRESET_TABLE_PRECUR)
*data = (tx_preset & TX_PRECUR_SMASK) >>
TX_PRECUR_SHIFT;
else if (field_index == TX_PRESET_TABLE_ATTN)
*data = (tx_preset & TX_ATTN_SMASK) >>
TX_ATTN_SHIFT;
else if (field_index == TX_PRESET_TABLE_POSTCUR)
*data = (tx_preset & TX_POSTCUR_SMASK) >>
TX_POSTCUR_SHIFT;
else if (field_index == TX_PRESET_TABLE_QSFP_TX_CDR_APPLY)
*data = (tx_preset & QSFP_TX_CDR_APPLY_SMASK) >>
QSFP_TX_CDR_APPLY_SHIFT;
else if (field_index == TX_PRESET_TABLE_QSFP_TX_EQ_APPLY)
*data = (tx_preset & QSFP_TX_EQ_APPLY_SMASK) >>
QSFP_TX_EQ_APPLY_SHIFT;
else if (field_index == TX_PRESET_TABLE_QSFP_TX_CDR)
*data = (tx_preset & QSFP_TX_CDR_SMASK) >>
QSFP_TX_CDR_SHIFT;
else if (field_index == TX_PRESET_TABLE_QSFP_TX_EQ)
*data = (tx_preset & QSFP_TX_EQ_SMASK) >>
QSFP_TX_EQ_SHIFT;
break;
case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
default:
break;
}
}
static int get_platform_fw_field_metadata(struct hfi1_devdata *dd, int table,
int field, u32 *field_len_bits,
u32 *field_start_bits)
{
struct platform_config_cache *pcfgcache = &dd->pcfg_cache;
u32 *src_ptr = NULL;
if (!pcfgcache->cache_valid)
return -EINVAL;
switch (table) {
case PLATFORM_CONFIG_SYSTEM_TABLE:
/* fall through */
case PLATFORM_CONFIG_PORT_TABLE:
/* fall through */
case PLATFORM_CONFIG_RX_PRESET_TABLE:
/* fall through */
case PLATFORM_CONFIG_TX_PRESET_TABLE:
/* fall through */
case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
/* fall through */
case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
if (field && field < platform_config_table_limits[table])
src_ptr =
pcfgcache->config_tables[table].table_metadata + field;
break;
default:
dd_dev_info(dd, "%s: Unknown table\n", __func__);
break;
}
if (!src_ptr)
return -EINVAL;
if (field_start_bits)
*field_start_bits = *src_ptr &
((1 << METADATA_TABLE_FIELD_START_LEN_BITS) - 1);
if (field_len_bits)
*field_len_bits = (*src_ptr >> METADATA_TABLE_FIELD_LEN_SHIFT)
& ((1 << METADATA_TABLE_FIELD_LEN_LEN_BITS) - 1);
return 0;
}
/* This is the central interface to getting data out of the platform config
* file. It depends on parse_platform_config() having populated the
* platform_config_cache in hfi1_devdata, and checks the cache_valid member to
* validate the sanity of the cache.
*
* The non-obvious parameters:
* @table_index: Acts as a look up key into which instance of the tables the
* relevant field is fetched from.
*
* This applies to the data tables that have multiple instances. The port table
* is an exception to this rule as each HFI only has one port and thus the
* relevant table can be distinguished by hfi_id.
*
* @data: pointer to memory that will be populated with the field requested.
* @len: length of memory pointed by @data in bytes.
*/
int get_platform_config_field(struct hfi1_devdata *dd,
enum platform_config_table_type_encoding
table_type, int table_index, int field_index,
u32 *data, u32 len)
{
int ret = 0, wlen = 0, seek = 0;
u32 field_len_bits = 0, field_start_bits = 0, *src_ptr = NULL;
struct platform_config_cache *pcfgcache = &dd->pcfg_cache;
struct hfi1_pportdata *ppd = dd->pport;
if (data)
memset(data, 0, len);
else
return -EINVAL;
if (ppd->config_from_scratch) {
/*
* Use saved configuration from ppd for integrated platforms
*/
get_integrated_platform_config_field(dd, table_type,
field_index, data);
return 0;
}
ret = get_platform_fw_field_metadata(dd, table_type, field_index,
&field_len_bits,
&field_start_bits);
if (ret)
return -EINVAL;
/* Convert length to bits */
len *= 8;
/* Our metadata function checked cache_valid and field_index for us */
switch (table_type) {
case PLATFORM_CONFIG_SYSTEM_TABLE:
src_ptr = pcfgcache->config_tables[table_type].table;
if (field_index != SYSTEM_TABLE_QSFP_POWER_CLASS_MAX) {
if (len < field_len_bits)
return -EINVAL;
seek = field_start_bits / 8;
wlen = field_len_bits / 8;
src_ptr = (u32 *)((u8 *)src_ptr + seek);
/*
* We expect the field to be byte aligned and whole byte
* lengths if we are here
*/
memcpy(data, src_ptr, wlen);
return 0;
}
break;
case PLATFORM_CONFIG_PORT_TABLE:
/* Port table is 4 DWORDS */
src_ptr = dd->hfi1_id ?
pcfgcache->config_tables[table_type].table + 4 :
pcfgcache->config_tables[table_type].table;
break;
case PLATFORM_CONFIG_RX_PRESET_TABLE:
/* fall through */
case PLATFORM_CONFIG_TX_PRESET_TABLE:
/* fall through */
case PLATFORM_CONFIG_QSFP_ATTEN_TABLE:
/* fall through */
case PLATFORM_CONFIG_VARIABLE_SETTINGS_TABLE:
src_ptr = pcfgcache->config_tables[table_type].table;
if (table_index <
pcfgcache->config_tables[table_type].num_table)
src_ptr += table_index;
else
src_ptr = NULL;
break;
default:
dd_dev_info(dd, "%s: Unknown table\n", __func__);
break;
}
if (!src_ptr || len < field_len_bits)
return -EINVAL;
src_ptr += (field_start_bits / 32);
*data = (*src_ptr >> (field_start_bits % 32)) &
((1 << field_len_bits) - 1);
return 0;
}
/*
* Download the firmware needed for the Gen3 PCIe SerDes. An update
* to the SBus firmware is needed before updating the PCIe firmware.
*
* Note: caller must be holding the SBus resource.
*/
int load_pcie_firmware(struct hfi1_devdata *dd)
{
int ret = 0;
/* both firmware loads below use the SBus */
set_sbus_fast_mode(dd);
if (fw_sbus_load) {
turn_off_spicos(dd, SPICO_SBUS);
do {
ret = load_sbus_firmware(dd, &fw_sbus);
} while (retry_firmware(dd, ret));
if (ret)
goto done;
}
if (fw_pcie_serdes_load) {
dd_dev_info(dd, "Setting PCIe SerDes broadcast\n");
set_serdes_broadcast(dd, all_pcie_serdes_broadcast,
pcie_serdes_broadcast[dd->hfi1_id],
pcie_serdes_addrs[dd->hfi1_id],
NUM_PCIE_SERDES);
do {
ret = load_pcie_serdes_firmware(dd, &fw_pcie);
} while (retry_firmware(dd, ret));
if (ret)
goto done;
}
done:
clear_sbus_fast_mode(dd);
return ret;
}
/*
* Read the GUID from the hardware, store it in dd.
*/
void read_guid(struct hfi1_devdata *dd)
{
/* Take the DC out of reset to get a valid GUID value */
write_csr(dd, CCE_DC_CTRL, 0);
(void)read_csr(dd, CCE_DC_CTRL);
dd->base_guid = read_csr(dd, DC_DC8051_CFG_LOCAL_GUID);
dd_dev_info(dd, "GUID %llx",
(unsigned long long)dd->base_guid);
}
/* read and display firmware version info */
static void dump_fw_version(struct hfi1_devdata *dd)
{
u32 pcie_vers[NUM_PCIE_SERDES];
u32 fabric_vers[NUM_FABRIC_SERDES];
u32 sbus_vers;
int i;
int all_same;
int ret;
u8 rcv_addr;
ret = acquire_chip_resource(dd, CR_SBUS, SBUS_TIMEOUT);
if (ret) {
dd_dev_err(dd, "Unable to acquire SBus to read firmware versions\n");
return;
}
/* set fast mode */
set_sbus_fast_mode(dd);
/* read version for SBus Master */
sbus_request(dd, SBUS_MASTER_BROADCAST, 0x02, WRITE_SBUS_RECEIVER, 0);
sbus_request(dd, SBUS_MASTER_BROADCAST, 0x07, WRITE_SBUS_RECEIVER, 0x1);
/* wait for interrupt to be processed */
usleep_range(10000, 11000);
sbus_vers = sbus_read(dd, SBUS_MASTER_BROADCAST, 0x08, 0x1);
dd_dev_info(dd, "SBus Master firmware version 0x%08x\n", sbus_vers);
/* read version for PCIe SerDes */
all_same = 1;
pcie_vers[0] = 0;
for (i = 0; i < NUM_PCIE_SERDES; i++) {
rcv_addr = pcie_serdes_addrs[dd->hfi1_id][i];
sbus_request(dd, rcv_addr, 0x03, WRITE_SBUS_RECEIVER, 0);
/* wait for interrupt to be processed */
usleep_range(10000, 11000);
pcie_vers[i] = sbus_read(dd, rcv_addr, 0x04, 0x0);
if (i > 0 && pcie_vers[0] != pcie_vers[i])
all_same = 0;
}
if (all_same) {
dd_dev_info(dd, "PCIe SerDes firmware version 0x%x\n",
pcie_vers[0]);
} else {
dd_dev_warn(dd, "PCIe SerDes do not have the same firmware version\n");
for (i = 0; i < NUM_PCIE_SERDES; i++) {
dd_dev_info(dd,
"PCIe SerDes lane %d firmware version 0x%x\n",
i, pcie_vers[i]);
}
}
/* read version for fabric SerDes */
all_same = 1;
fabric_vers[0] = 0;
for (i = 0; i < NUM_FABRIC_SERDES; i++) {
rcv_addr = fabric_serdes_addrs[dd->hfi1_id][i];
sbus_request(dd, rcv_addr, 0x03, WRITE_SBUS_RECEIVER, 0);
/* wait for interrupt to be processed */
usleep_range(10000, 11000);
fabric_vers[i] = sbus_read(dd, rcv_addr, 0x04, 0x0);
if (i > 0 && fabric_vers[0] != fabric_vers[i])
all_same = 0;
}
if (all_same) {
dd_dev_info(dd, "Fabric SerDes firmware version 0x%x\n",
fabric_vers[0]);
} else {
dd_dev_warn(dd, "Fabric SerDes do not have the same firmware version\n");
for (i = 0; i < NUM_FABRIC_SERDES; i++) {
dd_dev_info(dd,
"Fabric SerDes lane %d firmware version 0x%x\n",
i, fabric_vers[i]);
}
}
clear_sbus_fast_mode(dd);
release_chip_resource(dd, CR_SBUS);
}
Reference in New Issue View Git Blame Copy Permalink