There is no need for `ni_ai_cmdtest()` or `ni_ao_cmdtest()` to set the
`CMDF_WRITE` flag to the correct state as it has already been done by
the core comedi module.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The low-level Comedi drivers shouldn't change the `flags` member of
`struct comedi_cmd` as the Comedi core also uses some of those flags.
They should just ignore the flags they don't understand.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most comedi subdevices that support asynchronous commands only support
data transfer in either the "read" or "write" direction, as indicated by
the `SDF_CMD_READ` and `SDF_CMD_WRITE` subdevice flags, although a few
support both directions on the same subdevice (though not
simultaneously). The `struct comedi_cmd` structure passed via ioctl
call to set up the command contains a `CMDF_WRITE` flag that can be used
to choose the direction if the subdevice supports both directions, but
the flag is optional if the subdevice only supports data transfer in one
direction.
If the subdevice only supports asynchronous data transfer in a sing
direction, set the `CMDF_WRITE` flag to the correct state so that Comedi
can make use of it later. In the case of the `COMEDI_CMDTEST` ioctl,
the updated flag will be written back to the `struct comedi_cmd` in
user-space. In the case of the `COMEDI_CMD` ioctl, the flag only gets
written back if an error is detected while testing the command, or if
the `CMDF_BOGUS` command flag is set. Since `__comedi_get_user_cmd()`
is called for both ioctls, that's a good place to set the flag.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1) We can tighten up the code a little by returning directly and it
makes the code more future proof and easier to read.
2) "free" is a better name than "exit".
3) sizeof(priv_cmd) is shorter and more clear than sizeof(struct
android_wifi_priv_cmd).
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The original code had two bugs:
1) It didn't check if the string was zero length so it could oops when
it tried to dereference the ZERO_SIZE_PTR.
2) It didn't enforce that the string was NUL terminated.
It was also messy as pants.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to forward declare 'struct imx_drm_crtc' because the
"imx-drm.h" header file already includes it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call drm_panel_enable/disable in reaction to encoder_commit
and encoder_disable callbacks.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As long as only IPUv3 is supported in imx-drm, hide the separate
DRM_IMX_IPUV3 option and make DRM_IMX depend on IMX_IPUV3_CORE.
Reported-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the DMA channel is running, it is not allowed to change anything
but the inactive (double) buffer base address, so resizing a plane or
changing to a frame buffer with different pixel format is not possible.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This allows to update the buffer base address while the DMA
channel is running. It is needed to flip the frame buffer of
an active plane.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting the stride can only be done on inactive channels, while
the buffer base address can also be updated for running channels
using the hardware double buffering feature.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For the overlay plane scanning out a framebuffer with an alpha component,
enable the DP local alpha feature on the partial plane.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This function currently fails if the number of samples to add would
overflow the async buffer. Modify it to add the samples that fit so
at least some of the sample data is returned to the user.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of function put_unaligned_le32.
This is done using Coccinelle and semantic patch used is as follows:
@@ identifier tmp; expression ptr; expression y,e; type T; @@
- tmp = cpu_to_le32(y);
<+... when != tmp
- memcpy(ptr, (T)&tmp, ...);
+ put_unaligned_le32(y,ptr);
...+>
? tmp = e
@@ type T; identifier tmp; @@
- T tmp;
...when != tmp
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes a definition that was not used in driver xgifb
Signed-off-by: Sarah Khan <sarahjmi07@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A comment about a pre-existing bug data structure definition is added.
This bug was evidently introduced by Xiong Zhou in the patch
bd471258f2 ("staging: android: logger: use kuid_t instead of uid_t")
where the code was changed to hide a valid build warning instead of
solving the bug that was identified by it.
Signed-off-by: Somya Anand <somyaanand214@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WARNING: void function return statements are not generally useful
Signed-off-by: Surya Seetharaman <suryaseetharaman.9@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WARNING: msleep < 20ms can sleep for up to 20ms; see Documentation/timers/timers-howto.txt
Signed-off-by: Surya Seetharaman <suryaseetharaman.9@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of function put_unaligned_le16.
This is done using Coccinelle and semantic patch used is as follows:
@@ identifier tmp; expression ptr; expression y,e; type T; @@
- tmp = cpu_to_le16(y);
<+... when != tmp
- memcpy(ptr, (T)&tmp, ...);
+ put_unaligned_le16(y,ptr);
...+>
? tmp = e
@@ type T; identifier tmp; @@
- T tmp;
...when != tmp
Here, unnecessory comment after change is removed too.
This patch also fixes sparse warnings in file ieeee80211_softmac.c.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of function put_unaligned_le16.
This is done using Coccinelle and semantic patch used is as follows:
@@ identifier tmp; expression ptr; expression y,e; type T; @@
- tmp = cpu_to_le16(y);
<+... when != tmp
- memcpy(ptr, (T)&tmp, ...);
+ put_unaligned_le16(y,ptr);
...+>
? tmp = e
@@ type T; identifier tmp; @@
- T tmp;
...when != tmp
Here, to be compatible with the change header file is added too.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the static functions bthci_CmdSetEventFilter,
bthci_CmdReadRSSI and bthci_CmdHostNumberOfCompletedPackets, since their
body only consists of 'return HCI_STATUS_SUCCESS'.
Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces the use of function put_unaligned_le64.
This is done using Coccinelle and semantic patch used is as follows:
@@ identifier tmp; expression ptr; expression y,e; type T; @@
- tmp = cpu_to_le64(y);
<+... when != tmp
- memcpy(ptr, (T)&tmp, ...);
+ put_unaligned_le64(y,ptr);
...+>
? tmp = e
@@ type T; identifier tmp; @@
- T tmp;
...when != tmp
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ksock_net_t uses a __u64 quantity as an 'incarnation' timestamp. This is also
passed on in hello messages and used to detect if a reboot has occurred.
This 'incarnation' is obtained using do_gettimeofday.It is only used in equality
checks, so the absolute value does not matter.
This patch replaces do_gettimeofday with ktime_get_ns for the following reasons:
1. ktime_get_ns returns a __u64 which is safer than 'struct timeval'
which will overflow on 32-bit systems in year 2038 and beyond.
2. Reduced compute: ktime_get_ns is faster than the multiply/add
combination used in this function
Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch.pl warning in files of rtl8188eu
WARNING: else is not generally useful after a break or return
Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes some unneeded white space after casts within the
channel.c file. The checkpatch script was run after these changes,
and no further checks or warnings were seen.
Signed-off-by: Ken Depro <kenneth.depro@unisys.com>
Signed-off-by: Ben Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the following local variables in virtpci_device_add()
pIoChan changed to io_chan
pDev changed to dev
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the following local variables in fix_vbus_dev_info()
Change pChan to chan
Change devInfo to dev_info
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename pDev to dev in delete_vbus_device()
Signed-off-by: Bryan Thompson <bryan.thompson@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete the macros and related preprocessor code for DBG_GETFILE_PAYLOAD(),
DBG_GETFILE(), and DBG_PUTFILE().
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No one is using this definition so remove it.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Delete visorchipset_get_switch_info() and visorchipset_get_externalport_info()
as these functions were declared but not defined, or used.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
