Commit Graph

6860 Commits

Author SHA1 Message Date
Geert Uytterhoeven
a00d91ea26 fbdev: sh_mobile_hdmi: Re-init regs before irq re-enable on resume
When the PM domain containing the HDMI hardware block is powered down,
the HDMI register values (incl. interrupt polarity settings) are lost.
During resume, after powering up the PM domain, interrupts are
re-enabled, and an interrupt storm happens due to incorrect interrupt
polarity settings:

    irq 163: nobody cared (try booting with the "irqpoll" option)
    ...
    Disabling IRQ #163

To fix this, re-initialize the interrupt polarity settings, and the
htop1 register block (if present), during resume.

As the .suspend_noirq() and .resume_noirq() callbacks are not called
when using the generic PM domain, the normal .resume() callback is used,
and the device interrupt needs to be disabled/enabled manually.

This fixes resume from s2ram with power down of the A4MP PM domain on
r8a7740/Armadillo.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:42:13 +03:00
Mikulas Patocka
5b789da8a7 framebuffer: fix screen corruption when copying
The function bitcpy_rev has a bug that may result in screen corruption.
The bug happens under these conditions:
* the end of the destination area of a copy operation is aligned on a long
  word boundary
* the end of the source area is not aligned on a long word boundary
* we are copying more than one long word

In this case, the variable shift is non-zero and the variable first is
zero. The statements FB_WRITEL(comp(d0, FB_READL(dst), first), dst) reads
the last long word of the destination and writes it back unchanged
(because first is zero). Correctly, we should write the variable d0 to the
last word of the destination in this case.

This patch fixes the bug by introducing and extra test if first is zero.

The patch also removes the references to fb_memmove in the code that is
commented out because fb_memmove was removed from framebuffer subsystem.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:39:50 +03:00
Mikulas Patocka
f74a289b94 framebuffer: fix border color
The framebuffer code uses the current background color to fill the border
when switching consoles, however, this results in inconsistent behavior.
For example:
- start Midnigh Commander
- the border is black
- switch to another console and switch back
- the border is cyan
- type something into the command line in mc
- the border is cyan
- switch to another console and switch back
- the border is black
- press F9 to go to menu
- the border is black
- switch to another console and switch back
- the border is dark blue

When switching to a console with Midnight Commander, the border is random
color that was left selected by the slang subsystem.

This patch fixes this inconsistency by always using black as the
background color when switching consoles.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:39:16 +03:00
Behan Webster
c8b8888f09 arm, fbdev, omap2, LLVMLinux: Remove nested function from omapfb
Replace the use of nested functions where a normal function will suffice.

Nested functions are not liked by upstream kernel developers in general. Their
use breaks the use of clang as a compiler, and doesn't make the code any
better.

This code now works for both gcc and clang.

Signed-off-by: Behan Webster <behanw@converseincode.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:11:53 +03:00
Behan Webster
032e57f01b arm, fbdev, omap2, LLVMLinux: Remove nested function from omap2 dss
Replace the use of nested functions where a normal function will suffice.

Nested functions are not liked by upstream kernel developers in general. Their
use breaks the use of clang as a compiler, and doesn't make the code any
better.

This code now works for both gcc and clang.

Signed-off-by: Behan Webster <behanw@converseincode.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:11:44 +03:00
Fabian Frederick
8251434bb4 video: fbdev: valkyriefb.c: use container_of to resolve fb_info_valkyrie from fb_info
Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:06:01 +03:00
Fabian Frederick
29ebebb4b5 video: fbdev: pxafb.c: use container_of to resolve pxafb_info/layer from fb_info
Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:06:01 +03:00
Fabian Frederick
46ffbe20d2 video: fbdev: cyber2000fb.c: use container_of to resolve cfb_info from fb_info
Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:06:01 +03:00
Fabian Frederick
c4e423239c video: fbdev: controlfb.c: use container_of to resolve fb_info_control from fb_info
Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:06:00 +03:00
Fabian Frederick
21f7c24703 video: fbdev: sa1100fb.c: use container_of to resolve sa1100fb_info from fb_info
Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:06:00 +03:00
Fabian Frederick
1f17a0fa68 video: fbdev: stifb.c: use container_of to resolve stifb_info from fb_info
Use container_of instead of casting first structure member.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:06:00 +03:00
Rickard Strandqvist
b232e94d28 video: fbdev: sis: sis_main.c: Cleaning up missing null-terminate in conjunction with strncpy
Replacing strncpy with strlcpy to avoid strings that lacks null terminate.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 13:00:01 +03:00
Geert Uytterhoeven
66b330992c video: valkyriefb: Fix unused variable warning in set_valkyrie_clock()
If CONFIG_ADB_CUDA=n:

drivers/video/fbdev/valkyriefb.c: In function ‘set_valkyrie_clock’:
drivers/video/fbdev/valkyriefb.c:267: warning: unused variable ‘i’
drivers/video/fbdev/valkyriefb.c:266: warning: unused variable ‘req’

Move the variable declarations inside the existing #ifdef section to fix
this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-30 12:43:23 +03:00
abdoulaye berthe
88d5e520aa driver:gpio remove all usage of gpio_remove retval in driver
this remove all reference to gpio_remove retval in all driver
except pinctrl and gpio. the same thing is done for gpio and
pinctrl in two different patches.

Signed-off-by: Abdoulaye Berthe <berthe.ab@gmail.com>
Acked-by: Michael Büsch <m@bues.ch>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-09-18 11:03:10 -07:00
Dave Airlie
b2efb3f0a1 Linux 3.17-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJUFjfVAAoJEHm+PkMAQRiGANkIAIU3PNrAz9dIItq8a/rEAhnx
 l2shHoOyEmyNR2apholM3BPUNX50cbsc/HGdi7lZKLkA/ifAj6B9nFD2NzVsIChD
 1QWVcvdkKlVuxXCDd26qbijlfmbTOAWrLw9ntvM+J6ZtECM6zCAZF4MAV/FwogPq
 ETGKD76AxJtVIhBMS99troAiC1YxmQ7DKgEr8CraTOR1qwXEonnPCmN/IZA6x2/G
 EXiihOuQB5me1X7k4PI0V8CDscQOn+3B2CQHIrjRB+KiTF+iKIuI8n6ORC6bpFh+
 U8UZP9wLlIG1BrUHG83pIndglIHotqPcjmtfl1WGrRr2hn7abzVSfV+g5Syo3Vg=
 =Ep+s
 -----END PGP SIGNATURE-----

drm: backmerge tag 'v3.17-rc5' into drm-next

This is requested to get the fixes for intel and radeon into the
same tree for future development work.

i915_display.c: fix missing dev_priv conflict.
2014-09-16 11:38:04 +10:00
Pawel Moll
e4cf39ea47 video: ARM CLCD: Fix color model capabilities for DT platforms
The DT-based panel capabilities selection was picking up
a subset of available modes based on hardware configuration.
This was wrong, as the capabilities describe available
memory models and adapt the display controller to them
that the RGB output is wired up correctly (as in: R and
B components are not swapped).

This patch fixes it by removing the unnecessary limitation.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-12 11:45:10 +03:00
Andy Shevchenko
30296f6115 video: fbdev: use %*ph specifier to dump small buffers
Instead of dereference each byte let's use %*ph specifier in the printk()
calls.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-09 14:03:34 +03:00
Arnd Bergmann
9c8ee3c734 video: mx3fb: always enable BACKLIGHT_LCD_SUPPORT
Commit 7edaa761ee ("video: mx3fb: Add backlight control support")
changed the mx3fb driver so it always selects the BACKLIGHT_CLASS_DEVICE
symbol, but that is hidden behind BACKLIGHT_LCD_SUPPORT in Kconfig, so
we get a Kconfig warning for multi_v5_defconfig, which doesn't have that:

Warning: (DRM_RADEON && DRM_NOUVEAU && DRM_I915 && DRM_GMA500 &&
DRM_SHMOBILE && DRM_TILCDC && FB_BACKLIGHT && FB_MX3 && USB_APPLEDISPLAY
&& FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI &&
EEEPC_LAPTOP && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE
which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)

This makes sure we always enable both symbols together for mx3fb, like
we do for the other drivers that can't be built without backlight
support. Note that a better solution would be to ensure the driver can
work with or without backlight support.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-09-09 13:56:05 +03:00
Masanari Iida
1a84db567a treewide: fix errors in printk
This patch fix spelling typo in printk.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-09-01 11:18:25 +02:00
Linus Torvalds
115619b34f fbdev fixes for 3.17
Minor fbdev fixes for da8xx-fb, atmel_lcdfb, arm clcd and chipsfb.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUAIG5AAoJEPo9qoy8lh71SBcQAJBqtDv+NB+nKIHDvLhneuTz
 RxWGDjZ3MXFmXj08tjIUNAcOH1WXrryN+1P942n5xxjusJfUCeT4Gfbjg3rO6DMW
 5qoCexf5kM8TyCPMMCnonjXF1x7gm1LSQPFsYclQ9u7hAt2Me0liUpQc15rjuQAs
 kqjQroUihesb5EPbB7ygr3kAdg5fpvmwCgkhYUS4VySgfoM9KTzsuy+ckXTwcdeY
 QZGycuZTb2CIECVqoKUXBKeK2KuqAYNXxu2LHuEKGefR+gmBWdPvzQ9D1eTAfTsZ
 MFbQWqRMXYtYv/ueEgmHzyvko0cCJWnuj+75sjuMBceyI25M15uUN7tZ6QAY7DJt
 +exvSTdQwTxD/OEv604Y7glItsRRwHnasO3FtfNGuKRfKnhwzCK79i55/K8LKA32
 JqJhVaVRbgvkufMR3t45U84bROXeA0ccfs8aaCZvFl9B5LoyKDaDA0VpyybKYfqK
 Ze/Uf333EQOyzNCxc4tm/f+XaOyDfEceHfIxO8SStxJLZNRZ3D8BbA2qeFJSBXC7
 y8omdSw2KG7Ae1crATe1KI3RnZm4P03maRIXCmtwyZSGazfpAs+hDKZWnsgFn2j0
 Xky6RNBA3RhMk+9i6d6Li65PqFO5qFOTaRodQLvJTbxdafdsNUUu8m8eaNPjXH9Y
 uftph01uU8N7Pm3HyH1N
 =g8gz
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev fixes from Tomi Valkeinen:
 "Minor fbdev fixes for da8xx-fb, atmel_lcdfb, arm clcd and chipsfb"

* tag 'fbdev-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: da8xx-fb: preserve display width when changing HSYNC
  video: of: display_timing: double free on error
  drivers: video: fbdev: atmel_lcdfb.c: fix error return code
  video: ARM CLCD: Fix calculation of bits-per-pixel
  fbdev: Remove __init from chips_hw_init() to fix build failure
2014-08-29 11:59:46 -07:00
Jingoo Han
b6af73b422 backlight: omap1: add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:27:53 +01:00
Jingoo Han
3e51cd93f5 backlight: jornada720: Remove 'else' after a return
Fixed the following checkpatch warning.

  WARNING: else is not generally useful after a break or return

Suggested-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:26:51 +01:00
Jingoo Han
5b007dfee8 backlight: jornada720: Remove 'else' after a return
Fixed the following checkpatch warning.

  WARNING: else is not generally useful after a break or return

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:26:32 +01:00
Jingoo Han
4876b66497 backlight: wm831x_bl: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:26:21 +01:00
Jingoo Han
51ed5dc253 backlight: tdo24m: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:26:12 +01:00
Jingoo Han
3bf3b79fab backlight: s6e63m0: Remove 'else' after a return
Fixed the following checkpatch warning.

  WARNING: else is not generally useful after a break or return

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:26:02 +01:00
Jingoo Han
c915ae50d6 backlight: pcf50633: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:25:53 +01:00
Jingoo Han
a94cb12604 backlight: lp855x: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:25:44 +01:00
Jingoo Han
b50ffb8a5f backlight: lms501kf03: Remove 'else' after a return
Fixed the following checkpatch warning.

  WARNING: else is not generally useful after a break or return

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:25:33 +01:00
Jingoo Han
3033d2c0dd backlight: lm3639: Remove unnecessary return statements
Fixed the following checkpatch warning.

  WARNING: void function return statements are not generally useful

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:25:23 +01:00
Jingoo Han
e09bceac75 backlight: ld9040: Remove 'else' after a return
Fixed the following checkpatch warning.

  WARNING: else is not generally useful after a break or return

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:25:14 +01:00
Jingoo Han
547f60cee1 backlight: ili922x: Remove 'else' after a return
Fixed the following checkpatch warning.

  WARNING: else is not generally useful after a break or return

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:25:05 +01:00
Jingoo Han
7beeee469a backlight: cr_bllcd: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:24:51 +01:00
Jingoo Han
ff32c2fa81 backlight: corgi_lcd: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:24:40 +01:00
Jingoo Han
5b0d6e1912 backlight: ams369fg06: Remove 'else' after a return
Fixed the following checkpatch warning.

  WARNING: else is not generally useful after a break or return

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:24:28 +01:00
Jingoo Han
fe9a86235d backlight: adp8870: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:24:16 +01:00
Jingoo Han
5e548f0f55 backlight: adp8860: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:24:03 +01:00
Jingoo Han
f9bda39d13 backlight: adp5520: Add blank line after declarations
Fixed the following checkpatch warning.

  WARNING: Missing a blank line after declarations

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-29 08:23:50 +01:00
Fabio Estevam
964a1c4e0e backlight: generic_bl: Remove unused function
genericbl_limit_intensity() is exported, but it is never
called anywhere else.

Fix the following sparse warning:

drivers/video/backlight/generic_bl.c:59:6:
  warning: symbol 'genericbl_limit_intensity' was not declared.
  Should it be static?

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-28 14:10:16 +01:00
Peter Griffin
6728f2b109 backlight: Remove .owner field for drivers using module_platform_driver
This patch removes the superflous .owner field for drivers which
use the module_platform_driver or platform_driver_register api,
as this is overriden in __platform_driver_register.

Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-28 14:09:48 +01:00
Julia Lawall
58678a7702 video: fbdev: au1200fb: delete double assignment
Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:53:35 +03:00
Julia Lawall
a9a3cac690 video: fbdev: sis: delete double assignment
Delete successive assignments to the same location.  The second assignment
is changed to update a different field, as done in other nearby code.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:53:35 +03:00
Julia Lawall
2079a513b0 video: fbdev: intelfb: delete double assignment
Delete successive assignments to the same location.

In the second case, = is converted to |=, which looks appropriate based on
the values involved.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:53:34 +03:00
Julia Lawall
f57eda296d video: fbdev: riva: delete double assignment
Delete successive assignments to the same location.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression i;
@@

*i = ...;
 i = ...;
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:53:34 +03:00
Pramod Gurav
fbaa19df03 msm: msm_fb: Move to using managed resources of kzalloc
Move to managed verion of kzalloc. Also checks return for failure case
which was missing.

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>

CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
CC: Tomi Valkeinen <tomi.valkeinen@ti.com>
CC: Stephen Boyd <sboyd@codeaurora.org>
CC: Jingoo Han <jg1.han@samsung.com>
CC: Rob Clark <robdclark@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:53:33 +03:00
Pramod Gurav
0c46575f7c msm: msm_fb: Add remove function for platform driver for clean unloading
This adds a  remove function to platform driver structure so that
resources are released when driver is unloaded.

Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>

CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
CC: Tomi Valkeinen <tomi.valkeinen@ti.com>
CC: Stephen Boyd <sboyd@codeaurora.org>
CC: Jingoo Han <jg1.han@samsung.com>
CC: Rob Clark <robdclark@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:53:33 +03:00
Geert Uytterhoeven
87306c1d09 video: mx3fb: Update comment for dmaengine_prep_slave_sg() API
Commit 16052827d9 ("dmaengine/dma_slave:
introduce inline wrappers") changed the code to use the new API, but forgot
to update a comment.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jiri Kosina <trivial@kernel.org>
Cc: linux-fbdev@vger.kernel.org
--
v2:
  - New
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:53:33 +03:00
Fabian Frederick
c76031f3ec video: vermilion: remove unnecessary break after goto
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:53:32 +03:00
Julia Lawall
0842446462 video: fbdev: aty: use c99 initializers in structures
Use c99 initializers for structures.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@

struct i1 {
 fs
 T fld;
 ...};

@bad@
identifier decl.i1,i2;
expression e;
initializer list[decl.n] is;
@@

struct i1 i2 = { is,
+ .fld = e
- e
 ,...};
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:52:39 +03:00
Julia Lawall
39917f0872 OMAPDSS: DSI: use c99 initializers in structures
Use c99 initializers for structures.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@

struct i1 {
 fs
 T fld;
 ...};

@bad@
identifier decl.i1,i2;
expression e;
initializer list[decl.n] is;
@@

struct i1 i2 = { is,
+ .fld = e
- e
 ,...};
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:52:39 +03:00
Julia Lawall
1287c5bf21 video: fbdev: matrox: use c99 initializers in structures
Use c99 initializers for structures.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@decl@
identifier i1,fld;
type T;
field list[n] fs;
@@

struct i1 {
 fs
 T fld;
 ...};

@bad@
identifier decl.i1,i2;
expression e;
initializer list[decl.n] is;
@@

struct i1 i2 = { is,
+ .fld = e
- e
 ,...};
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:52:38 +03:00
Julia Lawall
68ecfe2fe2 video: of: display_timing: delete unneeded test before of_node_put
Of_node_put supports NULL as its argument, so the initial test is not
necessary.  Furthermore, native_mode cannot be NULL at this point.

Suggested by Uwe Kleine-König.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e;
@@

-if (e)
   of_node_put(e);
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:52:38 +03:00
Ian Abbott
4d4e2c003b video: da8xx-fb: preserve display width when changing HSYNC
When looking at this driver for a client, I noticed the code that
configures the HSYNC pulse clobbers the display width in the same
register.  It only preserves the MS part of the width in bit 3 and zeros
the LS part of the width in bits 9 to 4.  This doesn't matter during
initialization as the width is configured afterwards, but subsequent use
of the FBIPUT_HSYNC ioctl would clobber the width.

Preserve bits 9 to 0 of LCD_RASTER_TIMING_0_REG when configuring the
horizontal sync.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 15:36:51 +03:00
Dan Carpenter
62795a0d81 video: of: display_timing: double free on error
The display_timings_release() function frees "disp" and we free it
again on the next line.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 14:23:47 +03:00
Julia Lawall
6c131850ec drivers: video: fbdev: atmel_lcdfb.c: fix error return code
Convert a zero return value on error to a negative one, as returned
elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 13:04:15 +03:00
Jon Medhurst (Tixy)
2b6c53b150 video: ARM CLCD: Fix calculation of bits-per-pixel
If the device-tree specifies a max-memory-bandwidth property then the
CLCD driver uses that to calculate the bits-per-pixel supported,
however, this calculation is faulty for two reasons.

1. It doesn't ensure that the result is a sane value, i.e. a power of 2
   and <= 32 as the rest of the code assumes.

2. It uses the displayed resolution and calculates the average bandwidth
   across the whole frame. It should instead calculate the peak
   bandwidth based on the pixel clock.

This patch fixes both the above.

Signed-off-by: Jon Medhurst <tixy@linaro.org>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 12:50:27 +03:00
Pranith Kumar
754d561ab6 fbdev: Remove __init from chips_hw_init() to fix build failure
Fix build failure caused as follows:

The function chipsfb_pci_init() references
the function __init chips_hw_init().
This is often because chipsfb_pci_init lacks a __init
annotation or the annotation of chips_hw_init is wrong.

make: *** [drivers] Error 2

by removing the __init annotation from chips_hw_init(). The other thing that
could have been done was annotating chipsfb_pci_init(). But that cannot be done
since chipsfb_pci_init() is called from non __init functions.

Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-26 12:48:34 +03:00
Dave Airlie
c0ee755fc5 Merge tag 'topic/core-stuff-2014-08-15' of git://anongit.freedesktop.org/drm-intel into drm-next
So small drm stuff all over for 3.18. Biggest one is the cmdline parsing
from Chris with a few fixes from me to make it work for stupid kernel
configs.

Plus the atomic prep series.

Tested for more than a week in -nightly and Ville/Imre indeed discovered
some fun which is now fixed (and i915 vblank patches postponed since the
fixups need this branch plus drm-intel-next merged together).

* tag 'topic/core-stuff-2014-08-15' of git://anongit.freedesktop.org/drm-intel:
  drm: Use the type of the array element when reallocating
  drm: Don't return 0 for a value used as a denominator
  drm: Docbook fixes
  drm/irq: Implement a generic vblank_wait function
  drm: Add a plane->reset hook
  drm: trylock modest locking for fbdev panics
  drm: Move ->old_fb from crtc to plane
  drm: Handle legacy per-crtc locking with full acquire ctx
  drm: Move modeset_lock_all helpers to drm_modeset_lock.[hc]
  drm: Add drm_plane/connector_index
  drm: idiot-proof vblank
  drm: Warn when leaking flip events on close
  drm: Perform cmdline mode parsing during connector initialisation
  video/fbdev: Always built-in video= cmdline parsing
  drm: Don't grab an fb reference for the idr
2014-08-26 09:04:03 +10:00
Lothar Waßmann
937222c4dd pwm-backlight: Fix bogus request for GPIO#0 when instantiated from DT
commit 257462dbf3 ("pwm-backlight: switch to gpiod interface")
introduced a regression leading to acquiring a bogus GPIO-0 when
configured from DT without an 'enable-gpios' property.
The driver will happily accept the 0 initialized 'enable_gpio' member
of the struct platform_pwm_backlight_data as valid gpio number, and
request this GPIO as enable pin. In case of multiple driver instances,
the second will fail to register with the error message:
pwm-backlight backlight1.23: failed to request GPIO#0: -16

Fix this by setting enable_gpio in the pdata struct to -EINVAL.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-20 13:23:00 +01:00
Benoit Taine
9baa3c34ac PCI: Remove DEFINE_PCI_DEVICE_TABLE macro use
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to
meet kernel coding style guidelines.  This issue was reported by checkpatch.

A simplified version of the semantic patch that makes this change is as
follows (http://coccinelle.lip6.fr/):

// <smpl>

@@
identifier i;
declarer name DEFINE_PCI_DEVICE_TABLE;
initializer z;
@@

- DEFINE_PCI_DEVICE_TABLE(i)
+ const struct pci_device_id i[]
= z;

// </smpl>

[bhelgaas: add semantic patch]
Signed-off-by: Benoit Taine <benoit.taine@lip6.fr>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-12 12:15:14 -06:00
Linus Torvalds
c8d6637d04 This finally applies the stricter sysfs perms checking we pulled out
before last merge window.  A few stragglers are fixed (thanks linux-next!)
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT6CrEAAoJENkgDmzRrbjx3GoQAI1rt8XbTE8zVGf1PKp0SL10
 gWWL9BnnHtUFriwgIbT4mBa1p0wnavIzJIeUBH0rJb2BNAbf7mBT7CFPrMuS+iV2
 WlRoy/chIFnX5A7m6ddaHnzL8lPhMFvUi8dpvxO6FwpyhhNcUHqmb+uCZeLjTX/m
 Gj5mlOlilvH2NSugKyiTapCgcQMQqaaxcwKxyg1z3FRo12gwKvTBdjzdA3Fg7k4T
 TAEbTG4Fq6Q7DkQYDpJK2KWDkPmJ7hxExHFW/M0m1r7DpxY1oHI95TsugU3Mr2mM
 90S15vA6Sn0l1+bRiv5qHF26VjOpdhC8uQhydjnX+lqzBGBRNoMUE/ubmxd43G4m
 /VlVJ9ZD40HLEmRFdtJI6UZSHYwDh7eruVH7Sjj8KFiqGps/F6nDOhV7fVLOdI+0
 J9pLBbj1mA38pIK/XC3r2k8Z/u9GB/7tJFirzmk5rIVzNb/4GBrn/Cgf+GDX7djz
 r8c2QnLeUIht5fm34qKNnSQ/o+ZBKmG6f2bLuBesntZMsAD2cC5TUEP15NERuF3a
 Wa7Wn1Y9WuonH7O3j+PoUOys/bGLXZeFXfKYS8A8SGroE99xo/QhkRm/sNU0+wEz
 JTN4Sra03imE/YSniFnRyRiAShR3KAVen/yfOx6XPs/r5XrFG14Q7cqCKjp1EjHj
 TX5scRWFM5qntTSloGJt
 =9mjn
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "This finally applies the stricter sysfs perms checking we pulled out
  before last merge window.  A few stragglers are fixed (thanks
  linux-next!)"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  arch/powerpc/platforms/powernv/opal-dump.c: fix world-writable sysfs files
  arch/powerpc/platforms/powernv/opal-elog.c: fix world-writable sysfs files
  drivers/video/fbdev/s3c2410fb.c: don't make debug world-writable.
  ARM: avoid ARM binutils leaking ELF local symbols
  scripts: modpost: Remove numeric suffix pattern matching
  scripts: modpost: fix compilation warning
  sysfs: disallow world-writable files.
  module: return bool from within_module*()
  module: add within_module() function
  modules: Fix build error in moduleloader.h
2014-08-10 21:31:58 -07:00
Linus Torvalds
9e9ac89666 fbdev changes for 3.17
* Much better HDMI infoframe support for OMAP
 * Cirrus Logic CLPS711X framebuffer driver
 * DT support for PL11x CLCD driver
 * Various small fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT5LUrAAoJEPo9qoy8lh71G2kP/RyomOV8mOPErkVgslJukMlW
 iJO/Y47GcnHzosKK+7u8MUXlpbBdZjyoaKJxuh+D1OL0vc/LrSar4IwicqqGcD2C
 l5N8b9NytOf+sjtYuD24xkGo9bLr8vkaVNC3cgPNjE/x1kgRrtHoap1NOlv8vvuT
 OnbSkRdg/oENrdzwWjwJeayvT5a3TxLJY5JM9IMTzw6CKROIYScEmHUsy0jH2h/g
 60OrGPdzmPPutUKA/ZWe8Nu0Mhf4GcOeIl8CZ/u7ZyME7NKezyF0iATpMzn3+ylf
 9GafGbsxwgNW2KwoF379w6CV49UNyQhx4qxlkg8/N2km6ot6s1WoJrb/32qPu05J
 Wydfbovxo9elM/144m47a89TR4xV6Ia35kbSDmwrR7gmKjIDUE34Ruc7RdCLdO8n
 SxIG5724pktKlP1bdOT6gCLFnDq6vFK0gNnWwlCRKWnwg0H+Cyg5S07BNEF7/dvO
 gOkRPuyWz3m4rlpl9dL+TW+jaQR/FQAAgf8pUdjBeUTogUTvWf2NBb3H1bKoAnaE
 4fhLwE1qUxep3rhOqOpLbGzDmpvt0ebcNJzseypaSTO9c8QNbZJkxLLC1jchUjPj
 6FP4/SocuySik3on6Qulj6xGrp4zskBnjsTXOIZzxXjByX6uf/DNWPHEcEM9zIEk
 u0trGuXxlx8JkRkV/7aE
 =gXX+
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev updates from Tomi Valkeinen:
 - much better HDMI infoframe support for OMAP
 - Cirrus Logic CLPS711X framebuffer driver
 - DT support for PL11x CLCD driver
 - various small fixes

* tag 'fbdev-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (35 commits)
  OMAPDSS: DSI: fix depopulating dsi peripherals
  video: hyperv: hyperv_fb: refresh the VM screen by force on VM panic
  video: ARM CLCD: Fix DT-related build problems
  drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.
  video: ARM CLCD: Add DT support
  drm/omap: Add infoframe & dvi/hdmi mode support
  OMAPDSS: HDMI: remove the unused code
  OMAPDSS: HDMI5: add support to set infoframe & HDMI mode
  OMAPDSS: HDMI4: add support to set infoframe & HDMI mode
  OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields
  OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015
  OMAPDSS: add hdmi ops to hdmi_ops and omap_dss_driver
  OMAPDSS: HDMI: remove custom avi infoframe
  OMAPDSS: HDMI5: use common AVI infoframe support
  OMAPDSS: HDMI4: use common AVI infoframe support
  OMAPDSS: Kconfig: select HDMI
  OMAPDSS: HDMI: fix name conflict
  OMAPDSS: DISPC: clean up dispc_mgr_timings_ok
  OMAPDSS: DISPC: reject interlace for lcd out
  OMAPDSS: DISPC: fix debugfs reg dump
  ...
2014-08-08 18:09:33 -07:00
Linus Torvalds
10c8e05620 ARM: SoC driver changes for 3.17
A handful of driver-related changes. We've had a bunch of them going in through
 other branches as well, so it's only a part of what we really have this release.
 
 Larger pieces are:
 
 * Removal of a now unused PWM driver for atmel
   - This includes AVR32 changes that have been appropriately acked.
 * Performance counter support for the arm CCN interconnect
 * OMAP mailbox driver cleanups and consolidation
 * PCI and SATA PHY drivers for SPEAr 13xx platforms
 * Redefinition (with backwards compatibility!) of PCI DT bindings for Tegra to
   better model regulators/power.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DrJAAoJEIwa5zzehBx3wkkP/iwEfEK5mMon9KEe4DcKTKNq
 Z6xyWuMQNHKdfBFpABs6AsHQCKDc7KK6gN3+2zLLHEJ4XGDPZ2g2NaX3oRPJlaay
 BDK7rQfIZyi4tmbOnlEv1BDTYgirYBPMwk9RyNo/04Ug3W+Y67aSVo44zkNFBWaJ
 GbcX/zYsrsfvdawuQMW6V/A835s3Kq5Zhv1ikPr8gDDjswZRBAT6i7FYpBSHQ8K8
 bH6C1891Xit6rxXSLXJyrtM8CAet7PtLTqNr/IKdUaJnGD+fJm5EonxW+g8gvhN8
 gOEkm3nM60++kdDlzZCQVNr0m1+ih6NNCr6bDLO6rIRpAJM2O+YrN1rWuZaJOu1A
 pIvifk+wWHT+o52pXk8g9fK4n/ZJydK3IBzDePHMrIROOEiW5tLE3WA+u3NSfMfH
 WegMt9E2dcB+5gXPeejZ9gFbAHnh2S1oVTZfCYXtuOHrYiEU9U0FA3eRYvJEE2po
 k8sdiOn7Vc65O1QZ+xZNbLABpAHaye7X2evOJyhSutzHE/AtUvT4vuCAZ0tggXyD
 E1qVKngVW/NvcoFbwYeidq4bOVgiAEn3idZgF5gEq1mq7LzetXUQAcZAOQfLWHLQ
 RrXufS7Ez8pSCG74y0AFReVfQH2PgWHPqGUGj99NXgQauexc/vR1Hc5Iqb8liGNJ
 n6i8RqvvQ4KYcmHEXDIT
 =fsP6
 -----END PGP SIGNATURE-----

Merge tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver changes from Olof Johansson:
 "A handful of driver-related changes.  We've had a bunch of them going
  in through other branches as well, so it's only a part of what we
  really have this release.

  Larger pieces are:

   - Removal of a now unused PWM driver for atmel
     [ This includes AVR32 changes that have been appropriately acked ]
   - Performance counter support for the arm CCN interconnect
   - OMAP mailbox driver cleanups and consolidation
   - PCI and SATA PHY drivers for SPEAr 13xx platforms
   - Redefinition (with backwards compatibility!) of PCI DT bindings for
     Tegra to better model regulators/power"

Note: this merge also fixes up the semantic conflict with the new
calling convention for devm_phy_create(), see commit f0ed817638 ("phy:
core: Let node ptr of PHY point to PHY and not of PHY provider") that
came in through Greg's USB tree.

Semantic merge patch by Stephen Rothwell <sfr@canb.auug.org.au> through
the next tree.

* tag 'drivers-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (38 commits)
  bus: arm-ccn: Fix error handling at event allocation
  mailbox/omap: add a parent structure for every IP instance
  mailbox/omap: remove the private mailbox structure
  mailbox/omap: consolidate OMAP mailbox driver
  mailbox/omap: simplify the fifo assignment by using macros
  mailbox/omap: remove omap_mbox_type_t from mailbox ops
  mailbox/omap: remove OMAP1 mailbox driver
  mailbox/omap: use devm_* interfaces
  bus: ARM CCN: add PERF_EVENTS dependency
  bus: ARM CCN PMU driver
  PCI: spear: Remove spear13xx_pcie_remove()
  PCI: spear: Fix Section mismatch compilation warning for probe()
  ARM: tegra: Remove legacy PCIe power supply properties
  PCI: tegra: Remove deprecated power supply properties
  PCI: tegra: Implement accurate power supply scheme
  ARM: SPEAr13xx: Update defconfigs
  ARM: SPEAr13xx: Add pcie and miphy DT nodes
  ARM: SPEAr13xx: Add bindings and dt node for misc block
  ARM: SPEAr13xx: Fix static mapping table
  phy: Add drivers for PCIe and SATA phy on SPEAr13xx
  ...
2014-08-08 11:34:32 -07:00
Linus Torvalds
44c916d58b ARM: SoC cleanups for 3.17
This merge window brings a good size of cleanups on various
 platforms. Among the bigger ones:
 
 * Removal of Samsung s5pc100 and s5p64xx platforms. Both of these have
   lacked active support for quite a while, and after asking around nobody
   showed interest in keeping them around. If needed, they could be
   resurrected in the future but it's more likely that we would prefer
   reintroduction of them as DT and multiplatform-enabled platforms
   instead.
 * OMAP4 controller code register define diet. They defined a lot of registers
   that were never actually used, etc.
 * Move of some of the Tegra platform code (PMC, APBIO, fuse, powergate)
   to drivers/soc so it can be shared with 64-bit code. This also converts them
   over to traditional driver models where possible.
 * Removal of legacy gpio-samsung driver, since the last users have been
   removed (moved to pinctrl)
 
 Plus a bunch of smaller changes for various platforms that sort of
 dissapear in the diffstat for the above. clps711x cleanups, shmobile
 header file refactoring/moves for multiplatform friendliness, some misc
 cleanups, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJT5DYPAAoJEIwa5zzehBx37egQAIiatNiLLqZnfo3rwGADRz/a
 POfPovktj68aPcobyzoyhFtToMqGvi9PpysyFTIQD2HJFG+5BtiIAuqtg0875zDe
 EpBWgsfugrm0YktJWAtUerj60oAmNPbKfaEm1cOOWuM2lb2mV+QkRrwSTAgsqkT7
 927BzMXKKBRPOVLL0RYhoF8EXa0Eg8kCqAHP8fJrzVYkRp+UrZJDnGiUP1XmWJN+
 VXQMu5SEjcPMtqT7+tfX455RfREHJfBcJ1ZN/dPF8HMWDwClQG0lyc6hifh1MxwO
 8DjIZNkfZeKqgDqVyC17re7pc7p8md5HL8WXbrKpK0A9vQ5bRexbPHxcwJ1T/C2Y
 465H+st5XXbuzV1gbMwjK1/ycsH0tCyffckk8Yl/2e1Fs7GgPNbAELtTdl+5vV1Y
 xmDXkyo/9WlRM3LQ23IGKwW7VzN86EfWVuShssfro0fO7xDdb4OOYLdQI+4bCG+h
 ytQYun1vU32OEyNik5RVNQuZaMrv2c93a3bID4owwuPHPmYOPVUQaqnRX/0E51eA
 aHZYbk2GlUOV3Kq5aSS4iyLg1Yj+I9/NeH9U+A4nc+PQ5FlgGToaVSCuYuw4DqbP
 AAG+sqQHbkBMvDPobQz/yd1qZbAb4eLhGy11XK1t5S65rApWI55GwNXnvbyxqt8x
 wpmxJTASGxcfuZZgKXm7
 =gbcE
 -----END PGP SIGNATURE-----

Merge tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Olof Johansson:
 "This merge window brings a good size of cleanups on various platforms.
  Among the bigger ones:

   - Removal of Samsung s5pc100 and s5p64xx platforms.  Both of these
     have lacked active support for quite a while, and after asking
     around nobody showed interest in keeping them around.  If needed,
     they could be resurrected in the future but it's more likely that
     we would prefer reintroduction of them as DT and
     multiplatform-enabled platforms instead.

   - OMAP4 controller code register define diet.  They defined a lot of
     registers that were never actually used, etc.

   - Move of some of the Tegra platform code (PMC, APBIO, fuse,
     powergate) to drivers/soc so it can be shared with 64-bit code.
     This also converts them over to traditional driver models where
     possible.

   - Removal of legacy gpio-samsung driver, since the last users have
     been removed (moved to pinctrl)

  Plus a bunch of smaller changes for various platforms that sort of
  dissapear in the diffstat for the above.  clps711x cleanups, shmobile
  header file refactoring/moves for multiplatform friendliness, some
  misc cleanups, etc"

* tag 'cleanup-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (117 commits)
  drivers: CCI: Correct use of ! and &
  video: clcd-versatile: Depend on ARM
  video: fix up versatile CLCD helper move
  MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  ARM: EXYNOS: Fix build breakge with PM_SLEEP=n
  MAINTAINERS: Remove Kirkwood
  ARM: tegra: Convert PMC to a driver
  soc/tegra: fuse: Set up in early initcall
  ARM: tegra: Always lock the CPU reset vector
  ARM: tegra: Setup CPU hotplug in a pure initcall
  soc/tegra: Implement runtime check for Tegra SoCs
  soc/tegra: fuse: fix dummy functions
  soc/tegra: fuse: move APB DMA into Tegra20 fuse driver
  soc/tegra: Add efuse and apbmisc bindings
  soc/tegra: Add efuse driver for Tegra
  ARM: tegra: move fuse exports to soc/tegra/fuse.h
  ARM: tegra: export apb dma readl/writel
  ARM: tegra: Use a function to get the chip ID
  ARM: tegra: Sort includes alphabetically
  ARM: tegra: Move includes to include/soc/tegra
  ...
2014-08-08 11:00:26 -07:00
Tomi Valkeinen
e4e42b8ad2 OMAPDSS: DSI: fix depopulating dsi peripherals
After v3.16-rc1, devices populated with of_platform_populate() should be
depopulated using of_platform_depopulate(). Failure to do so prevents
the devices from being populated again (e.g. when loading a module).

This patch fixes the problem for the OMAP DSI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-08 14:26:36 +03:00
Linus Torvalds
7385d6fd88 == Changes to existing drivers ==
- Remove get brightness implementations in via-pmu-backlight samsung-q10
         aat2870_bl ams369fg06 bd6107 gpio_backlight ld9040 lp855x_bl lp8788_bl
 	lv5207lp pandora_bl pwm_bl s6e63m0 tps65217_bl aty128fb atyfb_base
 	radeon_backlight s6e8ax0 nv_backlight riva/fbdev
   - Improve error handling in jornada720_lcd
   - Make use of new 'get optional' GPIO command in pwm_bl
   - Fix sparse warning in ipaq_micro_bl
 
  == New drivers/supported devices ==
   - Add new driver for iPAQ
 
  == (Re-)moved drivers ==
   - None
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJT41Q7AAoJEFGvii+H/Hdhon4QAIqwhWkcnGJsNTFY9ap0UzcQ
 e8b3iO0TJ/GJs6tyBZn++lcmQE7GorcJo8lPG6ee8E9c0Ffoq/iNnG6cMYPXuc8O
 AQ+sE3ppudMa8+WbvdyTruEAecZpsHS3qpL/NcC89QteGcbkpkiiOD5TzBwmN8dQ
 keUog+cCWlmtACXM7SsWbhizVtxTh31tMeDaQ6WT6pSKTQkWia0ptMyGje3yErqZ
 ZXfxU0sDH3KA/NY5kUFcZJUBCvSvnwa9wqLw70jnjdLhZHyvyv4jh8Azql5u+S+x
 la8Fc7nfDxGuuZxkIKI1h018x52kAcX/SCzBrzmkus1iVTpYVeyslpdQnsPi/0qS
 ClTO4zr2+uSKnbo3M4f88foNK5vRZG6dl8K/dXCLLrPiQ303i4tEFo+a8dGnBgkF
 1gf8zbkC4RoDziKbANWehXnqv5gYstjSOfCT5WsESRHzx4pGOjJZJlHhsHG83ChQ
 GJ+Dprq2VYrdP13Ln9Uf5U3oWFI/SzolBmJkfrEaavTxuz8npcAIpBhD7VJ+cLdh
 qDIfJ774aaiQNbZX06p+y5VZ/a6pGcV4YmHxMIhOHYBcbzWTE8L2iko6CKHkSSV0
 cjVwPc2gMSLSwBCH1Fray0ws/H3kpaETyh0paHXoDm/5dMnVebPOCG+PSwShczWK
 owkpAZuy151Xlf8vDf0v
 =5Bxr
 -----END PGP SIGNATURE-----

Merge tag 'backlight-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight changes from Lee Jones:
  Changes to existing drivers:
   - remove get brightness implementations in via-pmu-backlight
     samsung-q10 aat2870_bl ams369fg06 bd6107 gpio_backlight ld9040
     lp855x_bl lp8788_bl lv5207lp pandora_bl pwm_bl s6e63m0 tps65217_bl
     aty128fb atyfb_base radeon_backlight s6e8ax0 nv_backlight
     riva/fbdev
   - improve error handling in jornada720_lcd
   - make use of new 'get optional' GPIO command in pwm_bl
   - fix sparse warning in ipaq_micro_bl

  New drivers/supported devices:
   - new driver for iPAQ"

* tag 'backlight-for-linus-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: ipaq_micro: Fix sparse non static symbol warning
  backlight: Add driver for iPAQ micro backlight
  backlight: pwm-backlight: Use devm_gpiod_get_optional()
  backlight: jornada720: Minimise code duplication and handle errors better
  backlight: Show brightness even if get_brightness is not implemented
  backlight: Remove trivial get_brightness implementations
2014-08-07 17:23:16 -07:00
Linus Torvalds
e669830526 Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for 3.17.  It contains:

   - misc Cavium Octeon, BCM47xx, BCM63xx and Alchemy  updates
   - MIPS ptrace updates and cleanups
   - various fixes that will also go to -stable
   - a number of cleanups and small non-critical fixes.
   - NUMA support for the Loongson 3.
   - more support for MSA
   - support for MAAR
   - various FP enhancements and fixes"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits)
  MIPS: jz4740: remove unnecessary null test before debugfs_remove
  MIPS: Octeon: remove unnecessary null test before debugfs_remove_recursive
  MIPS: ZBOOT: implement stack protector in compressed boot phase
  MIPS: mipsreg: remove duplicate MIPS_CONF4_FTLBSETS_SHIFT
  MIPS: Bonito64: remove a duplicate define
  MIPS: Malta: initialise MAARs
  MIPS: Initialise MAARs
  MIPS: detect presence of MAARs
  MIPS: define MAAR register accessors & bits
  MIPS: mark MSA experimental
  MIPS: Don't build MSA support unless it can be used
  MIPS: consistently clear MSA flags when starting & copying threads
  MIPS: 16 byte align MSA vector context
  MIPS: disable preemption whilst initialising MSA
  MIPS: ensure MSA gets disabled during boot
  MIPS: fix read_msa_* & write_msa_* functions on non-MSA toolchains
  MIPS: fix MSA context for tasks which don't use FP first
  MIPS: init upper 64b of vector registers when MSA is first used
  MIPS: save/disable MSA in lose_fpu
  MIPS: preserve scalar FP CSR when switching vector context
  ...
2014-08-07 08:47:00 -07:00
Daniel Vetter
ea6763c104 video/fbdev: Always built-in video= cmdline parsing
In drm/i915 we want to get at the video= cmdline modes even when we
don't have fbdev support enabled, so that users can always override
the kernel's initial mode selection.

But that gives us a direct depency upon the parsing code in the fbdev
subsystem. Since it's so little code just extract these 2 functions
and always build them in.

Whiel at it fix the checkpatch fail in this code.

v2: Also move fb_mode_option. Spotted by the kbuild.

v3: Review from Geert:
- Keep the old copyright notice from fb_mem.c, although I have no
idea what exactly applies.
- Only compile this when needed.

Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

--

I prefer if we can merge this through drm-next since we'll use it
there in follow-up patches.
-Daniel
2014-08-06 14:50:02 +02:00
Rusty Russell
82867936b0 drivers/video/fbdev/s3c2410fb.c: don't make debug world-writable.
We don't want random users to be able to spam the logs, and commit
37549e94c7 (sysfs: disallow
world-writable files.) finally makes this a build error.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-06 10:24:05 +09:30
Linus Torvalds
f74ad8df4e PCI changes for the v3.17 merge window:
Resource management
     - Support BAR sizes up to 128GB (Yinghai Lu)
     - Keep original resource if we fail to expand it (Guo Chao)
     - Return conventional error values from pci_revert_fw_address() (Bjorn Helgaas)
     - Tidy resource assignment messages (Bjorn Helgaas)
     - Don't exclude low BIOS area for non-PCI cards (Christoph Schulz)
 
   PCI device hotplug
     - Prevent NULL dereference during pciehp probe (Andreas Noever)
     - Make pciehp pcie_wait_cmd() self-contained (Bjorn Helgaas)
     - Wait for pciehp hotplug command completion lazily (Bjorn Helgaas)
     - Compute pciehp timeout from hotplug command start time (Bjorn Helgaas)
     - Remove pciehp assumptions about which commands cause completion events (Bjorn Helgaas)
     - Clear pciehp Data Link Layer State Changed during init (Myron Stowe)
     - Remove pciehp struct controller.no_cmd_complete (Rajat Jain)
     - Remove cpqphp unnecessary null test (Fabian Frederick)
     - Remove "invalid IRQ" warning for hot-added PCIe ports (Jiang Liu)
 
   IOMMU
     - Add DMA alias quirk for Intel 82801 bridge (Alex Williamson)
 
   MSI
     - Add internal msix_clear_and_set_ctrl() (Yijing Wang)
     - Remove unused msi_enabled_mask() (Yijing Wang)
     - Cache Multiple Message Capable in struct msi_desc (Yijing Wang)
     - Add msi_setup_entry() to clean up initialization (Yijing Wang)
     - Remove unused msi_remove_pci_irq_vectors() (Yijing Wang)
     - Retrieve first MSI IRQ from msi_desc rather than pci_dev (Yijing Wang)
     - Remove unused list access in __pci_restore_msix_state() (Yijing Wang)
     - Use irq_get_msi_desc() to simplify code (Yijing Wang)
 
   Generic host bridge driver
     - Fix GPL v2 license string typo (Bjorn Helgaas)
 
   Marvell MVEBU
     - Fix GPL v2 license string typo (Thierry Reding)
 
   NVIDIA Tegra
     - Use correct initial HW settings (Phil Edworthy)
     - Remove rcar_pcie_setup_window() resource argument (Phil Edworthy)
     - Fix GPL v2 license string typo (Thierry Reding)
 
   Renesas R-Car
     - Remove redundant config accessor register checks (Sergei Shtylyov)
     - Fix GPL v2 license string typo (Bjorn Helgaas)
 
   Virtualization
     - Factor secondary bus reset logic (Gavin Shan)
     - Remove duplicate powerpc reset logic (Gavin Shan)
 
   Miscellaneous
     - Rework default VGA detection for EFI (Bruno Prémont)
     - Fix sysfs "acpi_index" and "label" errors for NIC renaming (Simone Gotti)
     - Configure ASPM at pci_enable_device()-time (Vidya Sagar)
     - Add include/linux/pci_ids.h include guard (Rasmus Villemoes)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTzppBAAoJEFmIoMA60/r8mtQP/jgVWCSU+0ulHjoxVSRLu4Lc
 UGKQFjS03oWWflHdvW6wZFqN82Ynva9fYCLMtiKdPg7cgTosSRT3I4DjAIm80ZI/
 kZvHxSmi6DBYmchZBsWzj60zxNiYZeEgd7CevzcJRHuwbKNMr2y12s6hjJbyl5lF
 ygaXWpDveKjsEDjyk9vKjUGwul/NJKynar253Yh178XaoypdGuiEIw3D1lQFMZZp
 ADcRijIi+CD2BENtDr6fbldbj+yQ93yyUSloEnaKtWZD+Ao5IsHngN0IyRu+l1Wl
 LFob0AsopeYVFKdw22Gn1KAq9Jj01acsSBRXjgrauU+tLY512Vkbp1lFYl85B/38
 /Z0VNHncmIh29rq9Tl2xQwEeI3Ja27FfnMjC70dLM5YjWf8vsYnDEQZHyxAAe15D
 p3H3YuuDjmvHkoSrHY/68DLfDl9ubw3/BFUlCMqijL7444ZWLXathrnCV8ZJimmr
 PlF/m7GtXYF4wIw19m9KQqNBUPJJEsVHExKzICOY4v5/nMlvx4ZkBDR3tPNEH1sk
 3AYKjLDw21Nle7yKcAlxDI/TYWZqxuph23UpevzlQd16tutq2i2FqpauiqI3DFm4
 VfYVbOVQwfeUJt11VOCgxvE7RsTxCk5QefB+YKVAdVK6vMZHeZxsetYvrCDptnea
 cId/NfiEFnmr+u3mAyPM
 =U5Ip
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:
 "I'll be on vacation until Aug 11, and I suspect the merge window will
  open before then, so I'm sending this to you early.  There are more
  things I'd like to get into v3.17, so I hope to send another pull
  request soon after I return.

  The most notable pieces here are:

   - Support BARs up to 128GB (up from 8GB)
   - Fix SR-IOV resource assignment when we fail to expand a resource
   - Rework pciehp to handle a common hardware erratum
   - Cleanup MSI
   - Fix NIC renaming issue
   - Fix VGA default device issue on EFI systems
   - Fix ASPM configuration (previously we didn't enable it as expected)

  Alex Williamson has graciously agreed to take care of any major issues
  with this if you take it before I return.

  Details:

  Resource management
    - Support BAR sizes up to 128GB (Yinghai Lu)
    - Keep original resource if we fail to expand it (Guo Chao)
    - Return conventional error values from pci_revert_fw_address() (Bjorn Helgaas)
    - Tidy resource assignment messages (Bjorn Helgaas)
    - Don't exclude low BIOS area for non-PCI cards (Christoph Schulz)

  PCI device hotplug
    - Prevent NULL dereference during pciehp probe (Andreas Noever)
    - Make pciehp pcie_wait_cmd() self-contained (Bjorn Helgaas)
    - Wait for pciehp hotplug command completion lazily (Bjorn Helgaas)
    - Compute pciehp timeout from hotplug command start time (Bjorn Helgaas)
    - Remove pciehp assumptions about which commands cause completion events (Bjorn Helgaas)
    - Clear pciehp Data Link Layer State Changed during init (Myron Stowe)
    - Remove pciehp struct controller.no_cmd_complete (Rajat Jain)
    - Remove cpqphp unnecessary null test (Fabian Frederick)
    - Remove "invalid IRQ" warning for hot-added PCIe ports (Jiang Liu)

  IOMMU
    - Add DMA alias quirk for Intel 82801 bridge (Alex Williamson)

  MSI
    - Add internal msix_clear_and_set_ctrl() (Yijing Wang)
    - Remove unused msi_enabled_mask() (Yijing Wang)
    - Cache Multiple Message Capable in struct msi_desc (Yijing Wang)
    - Add msi_setup_entry() to clean up initialization (Yijing Wang)
    - Remove unused msi_remove_pci_irq_vectors() (Yijing Wang)
    - Retrieve first MSI IRQ from msi_desc rather than pci_dev (Yijing Wang)
    - Remove unused list access in __pci_restore_msix_state() (Yijing Wang)
    - Use irq_get_msi_desc() to simplify code (Yijing Wang)

  Generic host bridge driver
    - Fix GPL v2 license string typo (Bjorn Helgaas)

  Marvell MVEBU
    - Fix GPL v2 license string typo (Thierry Reding)

  NVIDIA Tegra
    - Use correct initial HW settings (Phil Edworthy)
    - Remove rcar_pcie_setup_window() resource argument (Phil Edworthy)
    - Fix GPL v2 license string typo (Thierry Reding)

  Renesas R-Car
    - Remove redundant config accessor register checks (Sergei Shtylyov)
    - Fix GPL v2 license string typo (Bjorn Helgaas)

  Virtualization
    - Factor secondary bus reset logic (Gavin Shan)
    - Remove duplicate powerpc reset logic (Gavin Shan)

  Miscellaneous
    - Rework default VGA detection for EFI (Bruno Prémont)
    - Fix sysfs "acpi_index" and "label" errors for NIC renaming (Simone Gotti)
    - Configure ASPM at pci_enable_device()-time (Vidya Sagar)
    - Add include/linux/pci_ids.h include guard (Rasmus Villemoes)"

* tag 'pci-v3.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (38 commits)
  PCI/MSI: Use irq_get_msi_desc() to simplify code
  PCI/MSI: Remove unused list access in __pci_restore_msix_state()
  PCI/MSI: Retrieve first MSI IRQ from msi_desc rather than pci_dev
  PCI/MSI: Remove unused function msi_remove_pci_irq_vectors()
  PCI/MSI: Add msi_setup_entry() to clean up MSI initialization
  PCI: Configure ASPM when enabling device
  x86: don't exclude low BIOS area when allocating address space for non-PCI cards
  PCI: generic: Fix GPL v2 license string typo
  PCI: rcar: Fix GPL v2 license string typo
  PCI: tegra: Fix GPL v2 license string typo
  PCI: mvebu: Fix GPL v2 license string typo
  PCI: Add include guard to include/linux/pci_ids.h
  x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()
  PCI: Tidy resource assignment messages
  PCI: Return conventional error values from pci_revert_fw_address()
  PCI: Cleanup control flow
  PCI: Support BAR sizes up to 128GB
  PCI: cpqphp: Remove unnecessary null test before debugfs_remove()
  PCI: pciehp: Clear Data Link Layer State Changed during init
  PCI: Add bridge DMA alias quirk for Intel 82801 bridge
  ...
2014-08-04 09:29:37 -07:00
Tomi Valkeinen
be92abea82 Merge branch '3.17/hdmi-infoframe' into for-next 2014-08-04 09:50:07 +03:00
Dexuan Cui
3686fe9642 video: hyperv: hyperv_fb: refresh the VM screen by force on VM panic
Currently the VSC has no chance to notify the VSP of the dirty rectangle on VM
panic because the notification work is done in a workqueue, and in panic() the
kernel typically ends up in an infinite loop, and a typical kernel config has
CONFIG_PREEMPT_VOLUNTARY=y and CONFIG_PREEMPT is not set, so a context switch
can't happen in panic() and the workqueue won't have a chance to run. As a
result, the VM Connection window can't refresh until it's closed and we
re-connect to the VM.

We can register a handler on panic_notifier_list: the handler can notify
the VSC and switch the framebuffer driver to a "synchronous mode", meaning
the VSC flushes any future framebuffer change to the VSP immediately.

v2: removed the MS-TFS line in the commit message
v3: remove some 'unlikely' markings
v4: avoid global variables as Tomi Valkeinen suggested

Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-04 09:35:27 +03:00
Pawel Moll
1d5167b72c video: ARM CLCD: Fix DT-related build problems
This patch fixes the following error when !CONFIG_OF:

drivers/video/fbdev/amba-clcd.c:800:54: warning: ‘struct amba_dev’ declared inside parameter list [enabled by default]
 static struct clcd_board *clcdfb_of_get_board(struct amba_dev *dev)
                                                      ^
and adds a missing Kconfig select causing this
when CONFIG_OF && !CONFIG_FB_MODE_HELPERS:

drivers/video/fbdev/amba-clcd.c:567: undefined reference to `fb_videomode_from_videomode'

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-08-04 09:31:35 +03:00
Wei Yongjun
87464cdba2 backlight: ipaq_micro: Fix sparse non static symbol warning
Fixes the following sparse warnings:

drivers/video/backlight/ipaq_micro_bl.c:73:24: warning:
 symbol 'micro_backlight_device_driver' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-31 10:31:22 +01:00
Manuel Lauss
ecc2ea3bd8 MIPS: Alchemy: au1200fb: use clk framework
minimal patch to replace direct clock register hackery with clock
framework calls.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7472/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 14:11:18 +02:00
Manuel Lauss
6b1889c14b MIPS: Alchemy: au1100fb: use clk framework
Use the clock framework to en/disable the clock to the au1100
framebuffer device.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7474/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 14:10:39 +02:00
Manuel Lauss
2f73bfbe08 MIPS: Alchemy: remove au_read/write/sync
replace au_read/write/sync with __raw_read/write and wmb.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7465/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 13:56:34 +02:00
Manuel Lauss
1d09de7dc7 MIPS: Alchemy: introduce helpers to access SYS register block.
This patch changes all absolute SYS_XY registers to offsets from the
SYS block base, prefixes them with AU1000 to avoid silent failures due
to changed addresses, and introduces helper functions to read/write
them.

No functional changes, comparing assembly of a few select functions shows
no differences.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/7464/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-07-30 13:53:28 +02:00
Michael Welling
d7aa64c32b drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.
The code has a variable to change the polarity of the PWM backlight control but
it was not being initialized. This patch adds a devicetree entry to set the
variable if required.

Signed-off-by: Michael Welling <mwelling@ieee.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-30 14:13:33 +03:00
Pawel Moll
d10715be03 video: ARM CLCD: Add DT support
This patch adds basic DT bindings for the PL11x CLCD cells
and make their fbdev driver use them.

Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-29 14:12:12 +03:00
Mark Brown
94f30477fc video: clcd-versatile: Depend on ARM
The Versatile CLCD helpers call dma_alloc_writecombine() which is only
available on ARM and AVR32, meaning they won't build on other platforms
including arm64. Unfortunately the current Kconfig enables the symbol
by default if ARCH_VEXPRESS is defined which means that it is enabled on
arm64 when building for the ARM reference platforms and models for ARMv8
since they have many hardware similarities with their pre-ARMv8 systems.

Since all the systems that need the helpers are ARM systems fix this by
adding a dependency on ARM.

Signed-off-by: Mark Brown <broonie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-28 10:53:52 +02:00
Linus Walleij
2188a988bb backlight: Add driver for iPAQ micro backlight
This adds a driver for the backlight controlled by the microcontroller
on the Compaq iPAQ series of handheld computers: h3100, h3600
and h3700.

Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-25 15:16:36 +01:00
Arnd Bergmann
ec4c4d877b video: fix up versatile CLCD helper move
commit 11c32d7b62 ("video: move Versatile CLCD helpers")
moved files out of the plat-versatile directory but in the process
got a few of the dependencies wrong:

- If CONFIG_FB is not set, the file no longer gets built, resulting
  in a link error
- If CONFIG_FB or CONFIG_FB_ARMCLCD are disabled, we also get a
  Kconfig warning for incorrect dependencies due to the symbol
  being 'select'ed from the platform Kconfig.
- When the file is not built, we also get a link error for missing
  symbols.

This patch should fix all three, by removing the 'select' statements,
changing the Kconfig description of the symbol to be enabled in
exactly the right configurations, and adding inline stub functions
for the case when the framebuffer driver is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2014-07-23 17:41:00 +02:00
Alexandre Courbot
ff9c5422d8 backlight: pwm-backlight: Use devm_gpiod_get_optional()
Make use of the new devm_gpiod_get_optional() to simplify the probe
code.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-18 08:40:06 +01:00
Lee Jones
1e3b097012 backlight: jornada720: Minimise code duplication and handle errors better
Rickard Strandqvi's ran a code analysis application which found that
jornada_lcd_get_contrast(() and jornada_lcd_set_contrast() contained
some code duplication (calling the same functions during various
code execution paths) and failed to return errors in a consistent
manner.  This patch aims to simplify the code, coercing it into
behaving at a level expected of a driver in the Linux kernel.

Suggested-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Reviewed-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-07-18 08:39:42 +01:00
Olof Johansson
e1adcba9c8 Some minor cleanups to the Ux500 core. DT-only probe path and
some constification from static code analysis.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTvm0dAAoJEEEQszewGV1z0+QQALK+SJvPRMum4lBaorNmmdQs
 2rz760astlUwGqojk4Fd3YilkQobXTe9Tv4tQiMb7p6XSbuktSYPZzGzG4EHarwn
 nyWxJSTdXNwljEg1LykwddTin1MBLxWpUyPb8IKoebcO1Bsxz93pdVqkViiiUfgi
 8auTQRCzt2bSRtYq2wLq7tot6vMW2thI7f8TtayXJEA+MkuDEx+F280dnpyJrXVM
 +dxzYwJVfe3wjPuJ2cL8tkib4FbPftlv/jgj4RpegFqzmxQkzcPxEm53IW8rhuZH
 R6LxRiqPvHvCtaXYQYbqhSa2DODIH2hNIUo2VgX8dOEFHbz5Ti72V4dVV3rdhRUJ
 EM5EnI30kStB/qA9pY1nmGYybnmZlUzeouzy/DbwPAl5kW1+EieXPQXtsLYDBMFm
 Tz09Hw+xLq+iqBOOreu2ohpcrUEsbSPiV5fx5K93G2/wcxOTBoO5UAlWpYhDaYTD
 aP5u7YQEubgwk2Pqggs3NJxfwISUflw7m+V628Zqr2g3+g3UvBHDTxN7/6qDraVa
 IgpnYLDUEnDmgPFjdTT5Ybcgs2D4uSo6xTN+O4F1AcKbE2G56x9Qt6YUvyPZalyH
 elQc9egDvZkVt1eO/HWW1qfmEU2LYaXsJYxhIjkxKQ0GdFq4E2IKq+0Ydz5p0omG
 2NGSFWxlTgqN/I0zWPbD
 =OmbF
 -----END PGP SIGNATURE-----

Merge tag 'ux500-core-for-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/cleanup

Merge "Ux500 core changes for v3.17 take 1" from Linus Walleij:

Some minor cleanups to the Ux500 core. DT-only probe path and
some constification from static code analysis.

* tag 'ux500-core-for-v3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
  ARM: ux500: remove pointless cache setup complexity
  ARM: ux500: storage class should be before const qualifier
  ARM: ux500: Staticize ab8505_regulators
  ARM: ux500: Staticize local symbols in cpu-db8500.c
  ARM: ux500: Staticise ux500_soc_attr
  + Linux 3.16-rc4

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12 21:41:09 -07:00
Olof Johansson
db6d842b84 Cleanup S5P SoCs for 3.17
- removing s5p64x0 SoCs and s5pc100 SoC in mainline because
   no more user and if it is required next time, it will be
   supported with DT.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTwbhUAAoJEA0Cl+kVi2xq1cMP/1GmlTA/rgYF8qj+HkeEv8+H
 APu4RFbDgqIaoq3FMaXRKIOYtlBfxKCj0bq4MSFEpcKJV0A9sE5RRJOM3x4i62t+
 I0I454FGWhZ7Qn8AE6CwW3+f5wI9wADYWnv2PAk3K1Clk6CejiGOzYN5S8QazJvh
 slC2dyQkJVmT9lv5bloef5btFyjH34vcWbOA+C9jPzyNC+s0d55MLM+gFe96IX3G
 6EkDXbvLx1ZmQE6HRvLW8yjQKsPEC52Ak4kfoISG29ZP7aDTsltDVU+FORA/ed5z
 58Era6Z+QGBVI+Px8JAY7FtJjGOk+pVZzLOtGL7iuWW6LvU12wG2bZSN+wrMezoD
 A2xR1fJo91iPGMAVovJTtzOR6/1ROvsjrsHE8HS+Nw+bxUzfzXuNw36HBPvf2hML
 HvYigH/0mtRQpTnGp/LPpynfWMOMJzcJ1/r/r/QxAbCtYRFyP2tu0da4gYHJmhy1
 zC01OfdECYvsNove069KgX+j2R7FRhzjPOe6N03AvpFOVaYbyfseVbDtIoDaYYyh
 ssUSHJ561p++y9NuI5m3UHLbRzI4j/Vj4hCGF73rDBO+KYfa120m02aBmefVNJa3
 aigekaZIJ9hmJgD3+nNYm6rVjbsTT1KF+Ie/vcAKN/ujNtgcpvRg4Icppy5zj2TW
 trRU5G5ylUCsHKg5FQlc
 =CFpb
 -----END PGP SIGNATURE-----

Merge tag 's5p-cleanup-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup

Merge "Samsung cleanup 2nd version for S5P SoCs for 3.17" from Kukjin Kim:

Cleanup S5P SoCs for 3.17
- removing s5p64x0 SoCs and s5pc100 SoC in mainline because
  no more user and if it is required next time, it will be
  supported with DT.

* tag 's5p-cleanup-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  video: fbdev: s3c-fb: remove s5pc100 related fimd and fb codes
  mtd: onenand: remove s5pc100 related onenand codes
  spi: s3c64xx: remove s5pc100 related spi codes
  gpio: samsung: remov s5pc100 related gpio codes
  ARM: S5PC100: no more support S5PC100 SoC
  video: fbdev: s3c-fb: remove s5p64x0 related fimd codes
  spi: s3c64xx: remove s5p64x0 related spi codes
  gpio: samsung: remove s5p64x0 related gpio codes
  ARM: S5P64X0: no more support S5P6440 and S5P6450 SoCs

Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-12 21:20:47 -07:00
Kukjin Kim
f86e0add81 video: fbdev: s3c-fb: remove s5pc100 related fimd and fb codes
This patch removes fimd and fb codes for s5pc100 SoC.

Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-13 07:35:15 +09:00
Kukjin Kim
8340417c66 video: fbdev: s3c-fb: remove s5p64x0 related fimd codes
This patch removes fimd codes for s5p6440 and s5p6450 SoCs.

Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-13 07:35:10 +09:00
Bruno Prémont
20cde69402 x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()
Commit b4aa016305 ("efifb: Implement vga_default_device() (v2)") added
efifb vga_default_device() so EFI systems that do not load shadow VBIOS or
setup VGA get proper value for boot_vga PCI sysfs attribute on the
corresponding PCI device.

Xorg doesn't detect devices when boot_vga=0, e.g., on some EFI systems such
as MacBookAir2,1.  Xorg detects the GPU and finds the DRI device but then
bails out with "no devices detected".

Note: When vga_default_device() is set boot_vga PCI sysfs attribute
reflects its state.  When unset this attribute is 1 whenever
IORESOURCE_ROM_SHADOW flag is set.

With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete
while having native drivers for the GPU also makes selecting sysfb/efifb
optional.

Remove the efifb implementation of vga_default_device() and initialize
vgaarb's vga_default_device() with the PCI GPU that matches boot
screen_info in pci_fixup_video().

[bhelgaas: remove unused "dev" in efifb_setup()]
Fixes: b4aa016305 ("efifb: Implement vga_default_device() (v2)")
Tested-by: Anibal Francisco Martinez Cortina <linuxkid.zeuz@gmail.com>
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Matthew Garrett <matthew.garrett@nebula.com>
CC: stable@vger.kernel.org	# v3.5+
2014-07-10 16:48:48 -06:00
Alexandre Belloni
ec38846ad5 backlight: atmel-pwm-bl: remove obsolete driver
The atmel-pwm-bl driver is now obsolete. It is not used by any mainlined boards
and is replaced by the generic pwm_bl with the pawm-atmel driver using the
generic PWM framework.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-09 15:13:34 +02:00
Tomi Valkeinen
3ddd605e8d OMAPDSS: HDMI: remove the unused code
We no longer need the horrible driver internal videmode tables, which
were used to decide if a given videomode is a HDMI or DVI mode. So
remove all related code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:59 +03:00
Tomi Valkeinen
769dcb114e OMAPDSS: HDMI5: add support to set infoframe & HDMI mode
Instead of using hardcoded AVI infoframe, and a custom HDMI/DVI mode
selection based in internal videomode tables, add support to set the
infoframe and HDMI/DVI mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
ab0aee9526 OMAPDSS: HDMI4: add support to set infoframe & HDMI mode
Instead of using hardcoded AVI infoframe, and a custom HDMI/DVI mode
selection based in internal videomode tables, add support to set the
infoframe and HDMI/DVI mode.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
c9d2c79944 OMAPDSS: HDMI: add infoframe and hdmi_dvi_mode fields
Add infoframe and hdmi_dvi_mode fields to 'struct hdmi_config' which
will be used in the following patches for OMAP4 and OMAP5 HDMI.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
9fb1737dff OMAPDSS: add hdmi ops to hdmi-connector and tpd12s015
Add pass-through functions for set_infoframe and set_hdmi_mode to
hdmi-connector and tpd12s015 drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
bbcc14ebf9 OMAPDSS: HDMI: remove custom avi infoframe
We now use the common AVI infoframe support, so the OMAP specific AVI
infoframe code can be removed.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
d0678c303f OMAPDSS: HDMI5: use common AVI infoframe support
Instead of using OMAP specific AVI infoframe structs, use the common one
from include/linux/hdmi.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
db85ca7ca5 OMAPDSS: HDMI4: use common AVI infoframe support
Instead of using OMAP specific AVI infoframe structs, use the common one
from include/linux/hdmi.h.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
89a2d6183b OMAPDSS: Kconfig: select HDMI
Select HDMI support to be able to use HDMI infoframe helpers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:58 +03:00
Tomi Valkeinen
d27d20c88d OMAPDSS: HDMI: fix name conflict
OMAP HDMI driver has an 'enum hdmi_audio_sample_size', which conflicts
with the common include/linux/hdmi.h.

Change the name of the OMAP specific enum with '_omap" postfix.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:57 +03:00
Tomi Valkeinen
eadd33bb95 OMAPDSS: DISPC: clean up dispc_mgr_timings_ok
dispc_mgr_timings_ok() is a bit confusing how it handles the return
value.

Change the function to just return immediately when a timing is deemed
not valid, making the code much easier to follow.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:57 +03:00
Tomi Valkeinen
beb8384d4a OMAPDSS: DISPC: reject interlace for lcd out
OMAP2/3 does not support interlace for LCD out. OMAP4+ does, but is not
supported by the driver at the moment.

The driver still accepts interlaced mode for LCD out, causing broken
display output.

This patch makes dispc reject interlace for LCD out.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:57 +03:00
Tomi Valkeinen
21d9ca9063 OMAPDSS: DISPC: fix debugfs reg dump
DISPC reg dump prints a few registers twice. Remove the extra prints.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:17:57 +03:00
Alexander Shiyan
b1f46dd107 video: clps711x: Fix sparse warnings
This patch fixes below warning:

  drivers/video/fbdev/clps711x-fb.c:314:17: warning: incorrect type in initializer (different address spaces)
  drivers/video/fbdev/clps711x-fb.c:314:17:    expected void *__p
  drivers/video/fbdev/clps711x-fb.c:314:17:    got char [noderef] <asn:2>*screen_base

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:04:45 +03:00
Alexander Shiyan
6471b30f42 video: clps711x: Fix driver build for CONFIG_FB=m
This patch fixes building CLPS711X FB driver if the framebuffer
core is used as a module.

LD      init/built-in.o
  drivers/built-in.o: In function `clps711x_fb_remove':
  :(.text+0x44a8): undefined reference to `unregister_framebuffer'
  drivers/built-in.o: In function `clps711x_fb_probe':
  :(.text+0x44cc): undefined reference to `fb_get_options'
  :(.text+0x45d8): undefined reference to `fb_alloc_cmap'
  :(.text+0x45e4): undefined reference to `register_framebuffer'
make: *** [vmlinux] Error 1

Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-04 11:04:04 +03:00
Vasily Khoruzhick
1add035307 video: fbdev: s3c2410fb: Move to clk_prepare_enable/clk_disable_unprepare
Use clk_prepare_enable/clk_disable_unprepare to make the driver
work properly with common clock framework.

Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01 13:32:32 +03:00
Rasmus Villemoes
621f58cc3a drivers/video/fbdev/sis: Add missing else
The surrounding code and the fact that the previous two if's are
rendered useless without this "else" (since SIS_340==55 and XGI_20==75
are greater than SIS_661==15) suggests that the "else" is indeed
missing.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01 13:32:31 +03:00
Joe Perches
0d0b4b4d1d fbdev: da8xx-fb: Use dma_zalloc_coherent
Use the zeroing function instead of dma_alloc_coherent & memset(,0,)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01 13:32:31 +03:00
Dan Carpenter
350f8ebab1 video/mbx: indent some if statements
Checkpatch.pl worries that we have left off the conditional bit because
it isn't indented correctly.

WARNING: suspect code indent for conditional statements (24, 24)

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01 13:32:30 +03:00
Scott Jiang
0b479c3db6 fb: adv7393: add missing semicolon
Commit f8bd493456 by Jingoo Han
introduced this problem. This makes bfin_adv7393fb.c failed to compile.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-07-01 13:18:38 +03:00
Linus Walleij
11c32d7b62 video: move Versatile CLCD helpers
This moves the Versatile-specific helper code and panel database
down into the drivers/video folder next to the CLCD driver
itself, preserving the config symbol but also moving the header
to platform data.

This is necessary to rid the Integrator of this final <plat/*>
inclusion dependency and get us one less user of the
plat-versatile folder.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-06-27 10:15:22 +02:00
Sachin Kamat
06f7d79317 video: omapdss: Fix potential null pointer dereference
kmalloc can return null. Add a check to avoid potential null
pointer dereference error when the pointer is accessed later.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-26 14:40:15 +03:00
Emil Goode
74c0554ac7 video: vt8500lcdfb: Remove kfree call since devm_kzalloc() is used
We use devm_kzalloc() to allocate memory for the struct vt8500lcd_info
pointer fbi, so there is no need to free it in vt8500lcd_remove().

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-26 14:40:07 +03:00
Himangi Saraogi
cb6ec182c1 drivers/video/fbdev : dereference without an error test
After a variable is assigned the result of backlight_device_register, an
error test should be performed before a dereference.

A simplified version of the semantic match that finds this problem is
as follows:

// <smpl>
@def0@
expression x;
position p0;
@@

x@p0 = backlight_device_register(...)

@protected@
expression def0.x,E;
position def0.p0;
position p;
statement S;
@@
x@p0
... when != x = E
if (!IS_ERR(x) && ...) {<... x@p ...>} else S

@unprotected@
expression def0.x,E;
identifier fld;
position def0.p0;
position p != protected.p;
@@
x@p0
... when != x = E
* x@p->fld
// </smpl>

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-26 13:48:00 +03:00
Fabian Frederick
7f8b9db7dd drivers/video/fbdev/sis/sis_main.c: remove unnecessary test on unsigned value
unsigned value is never < 0

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 10:55:18 +03:00
Paul Bolle
8c5a6d835e video: 68328fb: remove check for CONFIG_FB_68328_INVERT
Since v2.6.7 the 68328 frame buffer driver contains a check for
CONFIG_FB_68328_INVERT. But the Kconfig symbol FB_68328_INVERT was never
added to the tree. Remove this check and do some related cleaning up.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 10:55:13 +03:00
Emil Goode
c80a39d677 video: vt8500lcdfb: Remove kfree call since devm_kzalloc() is used
We use devm_kzalloc() to allocate memory for the struct vt8500lcd_info
pointer fbi, so there is no need to free it in vt8500lcd_remove().

Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 10:55:02 +03:00
Himangi Saraogi
6a90230593 video: msm: Introduce the use of the managed version of kzalloc
This patch moves data allocated using kzalloc to managed data allocated
using devm_kzalloc and cleans now unnecessary kfrees in probe and remove
functions. Also, linux/device.h is added to make sure the devm_*()
routine declarations are unambiguously available. The function
mddi_dummy_remove is removed as it is no longer required after
removing the kfree. The variable ret is also done away with.

The following Coccinelle semantic patch was used for making a part of
the change:

@platform@
identifier p, probefn, removefn;
@@
struct platform_driver p = {
  .probe = probefn,
  .remove = removefn,
};

@prb@
identifier platform.probefn, pdev;
expression e, e1, e2;
@@
probefn(struct platform_device *pdev, ...) {
  <+...
- e = kzalloc(e1, e2)
+ e = devm_kzalloc(&pdev->dev, e1, e2)
  ...
?-kfree(e);
  ...+>
}

@rem depends on prb@
identifier platform.removefn;
expression e;
@@
removefn(...) {
  <...
- kfree(e);
  ...>
}

Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 10:54:41 +03:00
Alexander Shiyan
ef74d46a4e video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driver
This adds support for the framebuffer available in the Cirrus
Logic CLPS711X CPUs.
FB features:
- 1-2-4 bits per pixel.
- Programmable panel size to a maximum of 1024x256 at 4 bps.
- Relocatible Frame Buffer (SRAM or SDRAM).
- Programmable refresh rates.
- 16 gray scale values.
This new driver is designed to usage with devicetree only.
The driver have been tested with custom board equipped
Cirrus Logic EP7312.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-24 10:54:27 +03:00
Andrzej Hajda
b3de3402e5 backlight: Show brightness even if get_brightness is not implemented
Many implementations of get_brightness operation returns only value
of props.brightness field. This change makes such implementations
unnecessary.

Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-23 13:26:02 +01:00
Andrzej Hajda
a5d8e2e73c backlight: Remove trivial get_brightness implementations
Since backlight core returns props.brightness in case get_brightness
is not implemented trivial implementations are not needed anymore.

Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-23 13:24:22 +01:00
Michael Welling
4bc8cad5e1 drivers:video:fbdev atmel_lcdfb.c power GPIO registration bug
A list that was intended for storing power control GPIOs was never
initialized correctly or filled. Without these lines of added code
the kernel hangs when trying to access an uninitialized list when a
power control GPIO is registered with the device tree.

Signed-off-by: Michael Welling <mwelling@ieee.org>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-06-23 14:45:49 +03:00
Linus Torvalds
0c9bc27530 Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
 "This looks bigger than it is, as one of the nouveau firmware fixes
  ("drm/gf100-/gr: report class data to host on fwmthd failure")
  regenerates a bunch of the firmware files after changing the assembly
  by a few lines, without that, its more of a

    36 files changed, 370 insertions(+), 129 deletions(-)

  It contains some vt.c fixes acked by Greg, for rare hard hangs on i915
  loading, that also fixes hangs on reload and spurious register write
  errors.

  drm core: one fix for uninit memory

  nouveau: displayport rework caused a few regressions, Ben has been
     fixing them as the appear, along with some other fixes

  radeon: pageflipping regression fix, deep color fix, mode validation
     fixes

  i915: fbc disable, vga console kick off, backlight fix, divide-by-zero
     fix"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (33 commits)
  drm: fix uninitialized acquire_ctx fields (v2)
  drm/radeon: Fix radeon_irq_kms_pflip_irq_get/put() imbalance
  Revert "drm/radeon: remove drm_vblank_get|put from pflip handling"
  drm/radeon: improve dvi_mode_valid
  drm/radeon: update mode_valid testing for DP
  drm/radeon: Use dce5/6 hdmi deep color clock setup also on dce8+
  drm/nouveau/disp: fix oops in destructor with headless cards
  drm/gf117/i2c: no aux channels on this chipset
  drm/nouveau/doc: update the thermal documentation
  drm/nouveau/pwr: fix typo in fifo wrap handling
  drm/nv50/disp: fix a potential oops in supervisor handling
  drm/nouveau/disp/dp: don't touch link config after success
  drm/nouveau/kms: reference vblank for crtc during pageflip.
  drm/gk104/fb/ram: fixups from an earlier search+replace
  drm/nv50/gr: remove an unneeded write while initialising PGRAPH
  drm/nv50/gr: fix overlap while zeroing zcull regions
  drm/gf100-/gr: report class data to host on fwmthd failure
  drm/gk104/ibus: increase various random timeouts
  drm/gk104/clk: only touch divider for mode we'll be using
  drm/radeon: Bypass hw lut's for > 8 bpc framebuffer scanout.
  ...
2014-06-19 18:40:36 -10:00
Dave Airlie
884d6147ba Merge tag 'drm-intel-fixes-2014-06-17' of git://anongit.freedesktop.org/drm-intel into drm-next
First round of fixes for 3.16-rc, mostly cc: stable, and the vt/vgacon
fixes from Daniel [1] to avoid hangs and unclaimed register errors on
module load/reload.

* tag 'drm-intel-fixes-2014-06-17' of git://anongit.freedesktop.org/drm-intel:
  drm/i915/bdw: remove erroneous chv specific workarounds from bdw code
  drm/i915: fix possible refcount leak when resetting forcewake
  drm/i915: Reorder semaphore deadlock check
  drm/i95: Initialize active ring->pid to -1
  drm/i915: set backlight duty cycle after backlight enable for gen4
  drm/i915: Avoid div-by-zero when pixel_multiplier is zero
  drm/i915: Disable FBC by default also on Haswell and later
  drm/i915: Kick out vga console
  drm/i915: Fixup global gtt cleanup
  vt: Don't ignore unbind errors in vt_unbind
  vt: Fix up unregistration of vt drivers
  vt: Fix replacement console check when unbinding
2014-06-19 10:54:35 +10:00
Benjamin Herrenschmidt
68986c9f0f Revert "offb: Add palette hack for little endian"
This reverts commit e1edf18b20.

This patch was a misguided attempt at fixing offb for LE ppc64
kernels on BE qemu but is just wrong ... it breaks real LE/LE
setups, LE with real HW, and existing mixed endian systems
that did the fight thing with the appropriate device-tree
property. Bad reviewing on my part, sorry.

The right fix is to either make qemu change its endian when
the guest changes endian (working on that) or to use the
existing foreign endian support.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.13+]
---
2014-06-16 19:45:45 +10:00
Linus Torvalds
af76004cf8 This pull-request merely contains some very basic build/run-time bug fixes.
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTmWOeAAoJEFGvii+H/HdhA38P/1mp7qIEy8k7t2hvBETjYPSt
 l846xJPgmzhoAlrvulaRSCOU2Z/G2VQUBV5kz3oGve6ZZPvU8Hs76mxJkLtYP44B
 3foSShfnGpXqUlP6oVjSAlwfiWZe6A9mjFpKboXEVqhWprxOBEp8QubqTxKOtd64
 FyRk/REbebNPmyggQwIGl2NxMr2LI2wDhVAVAJ2orFc+oShustFVwaUA/qSjy0Tc
 Cqed18w7R7cLdemgCHTF7kQDBqKL9wtta1oRl1TxhOgbOnroJfpos1SpIBZXQZ8u
 LoQQ1gljafqccj9HrV1JY7+BI1XePzrG/8Amu26/IkU/eVX+6tfK60BjM1hjb51Y
 MVuSvTn65T6ZqIPZ3Z9av5o0ZQJMmFQhRqQv+AM56eXEyNUXrS36HsajjtYK99a6
 rVg2G8qdQdQr7K19FoFmWnUy+NDfWeAaNRUG8DcNISaV5V3mw9XEJ3Yyh/7MnFde
 MmWDtV2R01WtBeSWkifn52gg4253SNxmHkWXqSWSvTyqnNPuPCJec15eYjaLvomC
 Ue3lcMCD0NdQpaID7CHIHdnazYbKwPnH7QJkrjmJ0pYIkNwYY+t/t2+90psjp3+3
 e4F3evYAj7vLdEwHaLEOmuvj4k/0z7Kf7gdugLKPeAmw9+T0PUJqbPvhn2lXMETN
 pQWlLA8PXTZR76b+X2+m
 =6hH0
 -----END PGP SIGNATURE-----

Merge tag 'backlight-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight fixes from Lee Jones:
 "This merely contains some very basic build/run-time bug fixes"

* tag 'backlight-for-linus-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: gpio-backlight: Fix warning when the GPIO is on a I2C chip
  video/backlight: s6e63m0: Fix string type mismatch
  video/backlight: LP8788 needs PWM
  video/backlight: LP855X needs PWM
  video/pxa: LCD_CORGI needs BACKLIGHT_CLASS_DEVICE
  video/backlight: LM3630A needs PWM
2014-06-12 12:45:50 -07:00
Linus Torvalds
682b7c1c8e Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main drm merge window pull request, changes all over the
  place, mostly normal levels of churn.

  Highlights:

  Core drm:
     More cleanups, fix race on connector/encoder naming, docs updates,
     object locking rework in prep for atomic modeset

  i915:
     mipi DSI support, valleyview power fixes, cursor size fixes,
     execlist refactoring, vblank improvements, userptr support, OOM
     handling improvements

  radeon:
     GPUVM tuning and large page size support, gart fixes, deep color
     HDMI support, HDMI audio cleanups

  nouveau:
     - displayport rework should fix lots of issues
     - initial gk20a support
     - gk110b support
     - gk208 fixes

  exynos:
     probe order fixes, HDMI changes, IPP consolidation

  msm:
     debugfs updates, misc fixes

  ast:
     ast2400 support, sync with UMS driver

  tegra:
     cleanups, hdmi + hw cursor for Tegra 124.

  panel:
     fixes existing panels add some new ones.

  ipuv3:
     moved from staging to drivers/gpu"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits)
  drm/nouveau/disp/dp: fix tmds passthrough on dp connector
  drm/nouveau/dp: probe dpcd to determine connectedness
  drm/nv50-: trigger update after all connectors disabled
  drm/nv50-: prepare for attaching a SOR to multiple heads
  drm/gf119-/disp: fix debug output on update failure
  drm/nouveau/disp/dp: make use of postcursor when its available
  drm/g94-/disp/dp: take max pullup value across all lanes
  drm/nouveau/bios/dp: parse lane postcursor data
  drm/nouveau/dp: fix support for dpms
  drm/nouveau: register a drm_dp_aux channel for each dp connector
  drm/g94-/disp: add method to power-off dp lanes
  drm/nouveau/disp/dp: maintain link in response to hpd signal
  drm/g94-/disp: bash and wait for something after changing lane power regs
  drm/nouveau/disp/dp: split link config/power into two steps
  drm/nv50/disp: train PIOR-attached DP from second supervisor
  drm/nouveau/disp/dp: make use of existing output data for link training
  drm/gf119/disp: start removing direct vbios parsing from supervisor
  drm/nv50/disp: start removing direct vbios parsing from supervisor
  drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
  drm/nouveau/disp/dp: create subclass for dp outputs
  ...
2014-06-12 11:32:30 -07:00
Linus Torvalds
4251c2a670 Most of this is cleaning up various driver sysfs permissions so we can
re-add the perm check (we unified the module param and sysfs checks, but
 the module ones were stronger so we weakened them temporarily).
 
 Param parsing gets documented, and also "--" now forces args to be
 handed to init (and ignored by the kernel).
 
 Module NX/RO protections get tightened: we now set them before calling
 parse_args().
 
 Cheers,
 Rusty.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTl+oJAAoJENkgDmzRrbjxtUEP/jIXml01jE2HquOJ/DfrCJOt
 ry5L5Iy8wVBRotTszrXqlD6+W8fLYsEdhM65Wof1H7X1qjaulqYZmrL7bQn4rIGN
 YPUmO5rOzECeAPNW5+e2JLnR4bmS99gVcWzJFCHUBd7Z8ceKaoIk7/XvUg6Mdjg7
 v0kJ5X+U9da2sVYYcZ71euth4ADLFDRNRexA1mPI6mKzJLOBgfvCBWZnkFVdBcjd
 VmL6ceFo/yP9Ed4pgG/4uXq1dZ4ZttpjPusDmNcjq+snOzsQb4tW+KB2Pr6iTwQy
 TDt7lQm5+xfUXgUG/S5L6PYn10P44Voo7AEJa+QK5YPSOY/eRVA0h4/ayP0vqDaJ
 LpZjqXbW77G4yOgEV9KRFLLXiFXykTh2TyCPYL5G2XVXQp1OmViu2f21JWJLFLgL
 mqOXYWdowOGVOOoTgwxIdxczCFCATJUaU5Ig6ay8C02E2mCwIV+IaGSdpsCiyjz/
 dNNumMxWg0NMo/c0YG4K3Ake6ZaGrwbnuJYijaEj6mgpifhh7k4yhFciXGLpkLnS
 Yuo4ORO0GX34z1+bX0iwrgMGPdy7+BnbXsDdWJsbsnwnKKes/Sp44fNl4lPwdM3n
 siaPsxmfAtl9EGqbkU1Fk+x5+X/Lv2I/7/nX5n53520RLkJJpbeMDfHUqpbrqeUN
 JNUTOZ9o72EqDVKnn175
 =IxSN
 -----END PGP SIGNATURE-----

Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux

Pull module updates from Rusty Russell:
 "Most of this is cleaning up various driver sysfs permissions so we can
  re-add the perm check (we unified the module param and sysfs checks,
  but the module ones were stronger so we weakened them temporarily).

  Param parsing gets documented, and also "--" now forces args to be
  handed to init (and ignored by the kernel).

  Module NX/RO protections get tightened: we now set them before calling
  parse_args()"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  module: set nx before marking module MODULE_STATE_COMING.
  samples/kobject/: avoid world-writable sysfs files.
  drivers/hid/hid-picolcd_fb: avoid world-writable sysfs files.
  drivers/staging/speakup/: avoid world-writable sysfs files.
  drivers/regulator/virtual: avoid world-writable sysfs files.
  drivers/scsi/pm8001/pm8001_ctl.c: avoid world-writable sysfs files.
  drivers/hid/hid-lg4ff.c: avoid world-writable sysfs files.
  drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files.
  drivers/mtd/devices/docg3.c: avoid world-writable sysfs files.
  speakup: fix incorrect perms on speakup_acntsa.c
  cpumask.h: silence warning with -Wsign-compare
  Documentation: Update kernel-parameters.tx
  param: hand arguments after -- straight to init
  modpost: Fix resource leak in read_dump()
2014-06-11 16:09:14 -07:00
Linus Torvalds
7f33e7241d pwm: Changes for v3.16-rc1
The majority of these changes are cleanups and fixes across all drivers.
 Redundant error messages are removed and more PWM controllers set the
 .can_sleep flag to signal that they can't be used in atomic context.
 
 Support is added for the Broadcom Kona family of SoCs and the Intel LPSS
 driver can now probe PCI devices in addition to ACPI devices. Upon shut-
 down, the pwm-backlight driver will now power off the backlight. It also
 uses the new descriptor-based GPIO API for more concise GPIO handling.
 
 A large chunk of these changes also converts platforms to use the lookup
 mechanism rather than relying on the global number space to reference
 PWM devices. This is largely in preparation for more unification and
 cleanups in future patches. Eventually it will allow the legacy PWM API
 to be removed.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABAgAGBQJTl/AqAAoJEN0jrNd/PrOhoZsP/1yLaSK3NuBXWg3VdpH9i8so
 GXBeh3dbKAmC5MYQlhh5XTvuNBbfOoSp6dGdL3pV9GjcffbqzTynn5YszrbanezX
 +fqBF1NvW+jb2sUfQmedh9y30O1ADZM0p+FXW/R7e2khiE+8VF2ox35Hc3LLBqk8
 SiZoy1UEzIo0BAHgtgCw2VXUYUSYX/KYGoF/t8TCCObKVC3wQ7pW5tN3Ekj14yNL
 NspM0Q8OsITCQO0PdOfHw1gBmy4iLSuoNpPKP12BQVx5seZ4LBaIz9Wh0jFu89hq
 zI1gFpGptMsxsaAn/zk6Nr9lHDkqxkhnuYA+dgkA6k0KI9jS1Me20WQEmvM9H9xs
 BJ8QOfMQP7AHCZeW61J+iPTtCyMwFejRSPMtPjNMfaOQduWJw7+o0GaA30F39dw0
 3Cki1C44o9KfwCdC9OcmLignHt5TC1FEJgJL4OY695x0za7XcVgEN6nTg70AQfaz
 pcm4PeCqtM9jvXdJQdDGDI7gVzT33kpBnGatqQ2bUqMDx8HeHIkdEXehLwsYP46m
 FX0RJb5ue40esbVWZDGYWJqkdInpHt6deahTW+Jq9Exo4ZMr5/DVkMQCl8oF3/em
 Y5ED67dnAQ4au1MhElnDTPKk4Uh28aWTYwo8HSO6rt+8jcguH1KvXvLa+z2BcaMv
 ZVN0ZPy2813ix6Q0yO3D
 =BDxR
 -----END PGP SIGNATURE-----

Merge tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm changes from Thierry Reding:
 "The majority of these changes are cleanups and fixes across all
  drivers.  Redundant error messages are removed and more PWM
  controllers set the .can_sleep flag to signal that they can't be used
  in atomic context.

  Support is added for the Broadcom Kona family of SoCs and the Intel
  LPSS driver can now probe PCI devices in addition to ACPI devices.
  Upon shutdown, the pwm-backlight driver will now power off the
  backlight.  It also uses the new descriptor-based GPIO API for more
  concise GPIO handling.

  A large chunk of these changes also converts platforms to use the
  lookup mechanism rather than relying on the global number space to
  reference PWM devices.  This is largely in preparation for more
  unification and cleanups in future patches.  Eventually it will allow
  the legacy PWM API to be removed"

* tag 'pwm/for-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (38 commits)
  pwm: fsl-ftm: set pwm_chip can_sleep flag
  pwm: ab8500: Fix wrong value shift for disable/enable PWM
  pwm: samsung: do not set manual update bit in pwm_samsung_config
  pwm: lp3943: Set pwm_chip can_sleep flag
  pwm: atmel: set pwm_chip can_sleep flag
  pwm: mxs: set pwm_chip can_sleep flag
  pwm: tiehrpwm: inline accessor functions
  pwm: tiehrpwm: don't build PM related functions when not needed
  pwm-backlight: retrieve configured PWM period
  leds: leds-pwm: retrieve configured PWM period
  ARM: pxa: hx4700: use PWM_LOOKUP to initialize struct pwm_lookup
  ARM: shmobile: armadillo: use PWM_LOOKUP to initialize struct pwm_lookup
  ARM: OMAP3: Beagle: use PWM_LOOKUP to initialize struct pwm_lookup
  pwm: modify PWM_LOOKUP to initialize all struct pwm_lookup members
  ARM: pxa: hx4700: initialize all the struct pwm_lookup members
  ARM: OMAP3: Beagle: initialize all the struct pwm_lookup members
  pwm: renesas-tpu: remove unused struct tpu_pwm_platform_data
  ARM: shmobile: armadillo: initialize all struct pwm_lookup members
  pwm: add period and polarity to struct pwm_lookup
  pwm: twl: Really disable twl6030 PWMs
  ...
2014-06-11 14:06:55 -07:00
Jani Nikula
ce9557b9fe Merge remote-tracking branch 'drm-intel/topic/kicking-dogs-and-vgacon' into drm-intel-fixes
vt/vgacon fixes to avoid hangs, unclaimed register errors on module
load, reload:

vt: Fix replacement console check when unbinding
vt: Fix up unregistration of vt drivers
vt: Don't ignore unbind errors in vt_unbind
drm/i915: Fixup global gtt cleanup
drm/i915: Kick out vga console

Link: http://lkml.kernel.org/r/1401980308-5116-1-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2014-06-11 11:38:41 +03:00
Daniel Vetter
a4de05268e drm/i915: Kick out vga console
Touching the VGA resources on an IVB EFI machine causes hard hangs when
we then kick out the efifb. Ouch.

Apparently this also prevents unclaimed register errors on hsw and
hard machine hangs on my i855gm when trying to unbind fbcon.

Also, we want this to make I915_FBDEV=n safe.

v2: Rebase and pimp commit message.

v3: We also need to unregister the vga console, otherwise the unbind
of the fb console before module unload might resurrect it again.

v4: Ignore errors when the vga console is already unregistered - this
can happen when e.g. reloading i915.ko.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67813
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v1)
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-09 21:03:47 +02:00
Tony Lindgren
ab1e59b4dc backlight: gpio-backlight: Fix warning when the GPIO is on a I2C chip
If the GPIO for the backlight is on an I2C chip, we currently
get nasty warnings like this during the boot:

WARNING: CPU: 0 PID: 6 at drivers/gpio/gpiolib.c:2364 gpiod_set_raw_value+0x40/0x4c()
Modules linked in:
CPU: 0 PID: 6 Comm: kworker/u2:0 Not tainted 3.15.0-rc4-12393-gcde9f4e #400
Workqueue: deferwq deferred_probe_work_func
[<c0014cbc>] (unwind_backtrace) from [<c001191c>] (show_stack+0x10/0x14)
[<c001191c>] (show_stack) from [<c0566ae0>] (dump_stack+0x80/0x9c)
[<c0566ae0>] (dump_stack) from [<c003f61c>] (warn_slowpath_common+0x68/0x8c)
[<c003f61c>] (warn_slowpath_common) from [<c003f65c>] (warn_slowpath_null+0x1c/0x24)
[<c003f65c>] (warn_slowpath_null) from [<c02f7e10>] (gpiod_set_raw_value+0x40/0x4c)
[<c02f7e10>] (gpiod_set_raw_value) from [<c0308fbc>] (gpio_backlight_update_status+0x4c/0x74)
[<c0308fbc>] (gpio_backlight_update_status) from [<c030914c>] (gpio_backlight_probe+0x168/0x254)
[<c030914c>] (gpio_backlight_probe) from [<c0378fa8>] (platform_drv_probe+0x18/0x48)
[<c0378fa8>] (platform_drv_probe) from [<c0377c40>] (driver_probe_device+0x10c/0x238)
[<c0377c40>] (driver_probe_device) from [<c0376330>] (bus_for_each_drv+0x44/0x8c)
[<c0376330>] (bus_for_each_drv) from [<c0377afc>] (device_attach+0x74/0x8c)
[<c0377afc>] (device_attach) from [<c03771c4>] (bus_probe_device+0x88/0xb0)
[<c03771c4>] (bus_probe_device) from [<c03775c8>] (deferred_probe_work_func+0x64/0x94)
[<c03775c8>] (deferred_probe_work_func) from [<c00572e8>] (process_one_work+0x1b4/0x4bc)
[<c00572e8>] (process_one_work) from [<c00579d0>] (worker_thread+0x11c/0x398)
[<c00579d0>] (worker_thread) from [<c005dfd8>] (kthread+0xc8/0xe4)
[<c005dfd8>] (kthread) from [<c000e768>] (ret_from_fork+0x14/0x2c)

Fix this by using gpio_set_value_cansleep() as suggested in
drivers/gpio/gpiolib.c:2364. This is what the other backlight drivers
are also doing.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-06-05 10:00:53 +01:00
Linus Torvalds
15b5883031 fbdev changes for 3.16 (omap)
* DT support for the panel drivers that were still missing it
 * TI AM43xx support
 * TI OMAP5 support
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTju5gAAoJEPo9qoy8lh71iXgP/iZFTyOJkQamsmjfsjcPS42y
 KzDfYuivqdferqCWG8jcTfWjEhVmaM7A66rmFleZ3vf7nB9KPK1HyME9Kdp9vv7x
 xhIi+BsPYkmeeQ+5P/eMcQykFvyya42wO5VrUdjVrKvhmXWhmHyWMAY+Ms3Bmk/2
 Z7GqsRuGr5pCqJqjiNg0WaT8n1L/15HvRAiXTgia8QWOPLoJkNHmop9DoElu+vfM
 hSXTk1ieBPZzWftpf79APjcfsWyrCE00Yls0Y0MQ2kK1F/PvlbuSz7nl16Zb1g/v
 ArpZKuh/hDL/b1dUeBFfIf0IyRZcZqblqbx/rWC/yYFOH+SWYmdWOF6D6xxe++Pm
 CQtl21+z4ns6rqEyhIpD82JNxezo2Aj0OwmQgL25AEp3ej7gyobAMVMjFrKBp/XY
 b79KBWwHtVHc9irHS6s1VoNVo6W4r0ZtCnF1H1Qf58w2UuUPau9rdVV3duAyTCsm
 XngUlgCTFcH2MpPz/EIXXQjpwHSGB0R5PtwddoxMR0viqZrkgx8FrhuvmNvHu+Om
 HsR9F/vyfwS+9yLT0sWW7OUCOR4v0/zmwgIMn58bkY+IKYm0jGTazKx7YqERzpgn
 SBjNAblKJczr57Mn18AXAB6mFO/IuDF6IMLKJfl9igKP+iU8/v41TPFoirq2s8Fq
 xtPa8LscVtM+HS35FiS/
 =QKsH
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into next

Pull omap fbdev changes from Tomi Valkeinen:
 - DT support for the panel drivers that were still missing it
 - TI AM43xx support
 - TI OMAP5 support

* tag 'fbdev-omap-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (46 commits)
  OMAPDSS: move 'compatible' converter to omapdss driver
  OMAPDSS: HDMI: fix devm_ioremap_resource error checks
  OMAPDSS: HDMI: remove unused defines
  OMAPDSS: HDMI: cleanup WP ioremaps
  OMAPDSS: panel NEC-NL8048HL11 DT support
  Doc/DT: Add DT binding documentation for TPO td043mtea1 panel
  OMAPDSS: Panel TPO-TD043MTEA1 DT support
  Doc/DT: Add DT binding documentation for SHARP LS037V7DW01
  OMAPDSS: panel sharp-ls037v7dw01 DT support
  OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod
  Doc/DT: Add binding doc for lgphilips,lb035q02.txt
  OMAPDSS: panel-lgphilips-lb035q02: Add DT support
  OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
  OMAPDSS: hdmi5_core: Fix compilation with OMAP5_DSS_HDMI_AUDIO
  OMAPDSS: panel-dpi: enable-gpio
  OMAPDSS: Fix writes to DISPC_POL_FREQ
  Doc/DT: Add OMAP5 DSS DT bindings
  OMAPDSS: HDMI: cleanup ioremaps
  OMAPDSS: HDMI: Add OMAP5 HDMI support
  OMAPDSS: HDMI: PLL changes for OMAP5
  ...
2014-06-04 09:07:08 -07:00
Linus Torvalds
d55696af8d fbdev changes for 3.16 (main part)
Mainly fixes and small improvements. The biggest change seems to be backlight
 control support for mx3fb.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJTju0rAAoJEPo9qoy8lh71hsEP/03g4O1AmV0j+dDhemaQXZTg
 OVTMPhjWF77RRApp/aneX48/+F1qaQyVbdyBWrlVFlRhPOCvkDC/JCU2PhqI9399
 wRVOeL01q2IJHzh3S7jvQqF79WejO3VOfK/LbkztVnJMVHw8h5uaGEqHrOu4IpdU
 tsLeSrNPsfJd0e1bmTAXOWft+I5hekRmLqbWbGzV6l1TElLo0tJjN3sbUUe7wTQF
 gsS3svnH8LAS0njpcuskWRNz9XpMkIJl/CGaB5kRqvswPbeFPgzwHXsH4N7LFNFm
 xyw/xgRTOWGhbKAdzylp1Ko15S36iVTuWzwi0KJ4CNd6f1LXlPvznR6a+m722C1K
 GuCIbLH6vqNW/EAxmpMYyvMlEYIrgu4fuFh0+V6dEv3zPFY/1XWjx3Un7mhfryXi
 zmDeZfMpkDyTMHlzGpuCaC5jp92LqEN+Ys1AWGJFwpUSMQcP3GoyPh4tLnC2C+/t
 hf9TCQ4V2C7ongLIImiI2plhgAE173L2ZkIJjgcVYOO/DP+Eq7fI0dTFy6E49Mwk
 Zwc7MlYg50/eoRkaZ7gLvaVuzoPr+EoMdKXI/p+5/4rIpomZQ9Ndu2hswvzjd9WY
 Hf0fT6NJQ+wLPl3MtACwsdxSnq0ige1sv5awVUAWvP436mFExtbuXnM/B1NnwECI
 TcRqEYMINo3u8cbhHUVW
 =Gfjc
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-main-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into next

Pull main fbdev changes from Tomi Valkeinen:
 "Mainly fixes and small improvements.  The biggest change seems to be
  backlight control support for mx3fb"

* tag 'fbdev-main-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (31 commits)
  drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap
  video: fbdev: s3fb.c: Fix for possible null pointer dereference
  video: fbdev: grvga.c: Fix for possible null pointer dereference
  matroxfb: perform a dummy read of M_STATUS
  video: of: display_timing: fix default native-mode setting
  video: delete unneeded call to platform_get_drvdata
  video: mx3fb: Add backlight control support
  video: omap: delete support for early fbmem allocation
  video: of: display_timing: remove two unsafe error messages
  fbdev: fbmem: remove positive test on unsigned values
  fbcon: Fix memory leak in con2fb_release_oldinfo()
  video: Kconfig: Add a dependency to the Goldfish framebuffer driver
  video: exynos: Add a dependency to the menu
  video: mx3fb: Use devm_kzalloc
  video/nuc900: allow modular build
  video: atmel needs FB_BACKLIGHT
  video: export fb_prepare_logo
  video/mbx: fix building debugfs support
  video/omap: fix modular build
  video: clarify I2C dependencies
  ...
2014-06-04 09:05:12 -07:00
Linus Torvalds
4dc4226f99 ACPI and power management updates for 3.16-rc1
- ACPICA update to upstream version 20140424.  That includes a
    number of fixes and improvements related to things like GPE
    handling, table loading, headers, memory mapping and unmapping,
    DSDT/SSDT overriding, and the Unload() operator.  The acpidump
    utility from upstream ACPICA is included too.  From Bob Moore,
    Lv Zheng, David Box, David Binderman, and Colin Ian King.
 
  - Fixes and cleanups related to ACPI video and backlight interfaces
    from Hans de Goede.  That includes blacklist entries for some new
    machines and using native backlight by default.
 
  - ACPI device enumeration changes to create platform devices
    rather than PNP devices for ACPI device objects with _HID by
    default.  PNP devices will still be created for the ACPI device
    object with device IDs corresponding to real PNP devices, so
    that change should not break things left and right, and we're
    expecting to see more and more ACPI-enumerated platform devices
    in the future.  From Zhang Rui and Rafael J Wysocki.
 
  - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing
    it to handle system suspend/resume on Asus T100 correctly.
    From Heikki Krogerus and Rafael J Wysocki.
 
  - PM core update introducing a mechanism to allow runtime-suspended
    devices to stay suspended over system suspend/resume transitions
    if certain additional conditions related to coordination within
    device hierarchy are met.  Related PM documentation update and
    ACPI PM domain support for the new feature.  From Rafael J Wysocki.
 
  - Fixes and improvements related to the "freeze" sleep state. They
    affect several places including cpuidle, PM core, ACPI core, and
    the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.
 
  - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
    Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.
 
  - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
    Aggregator Device) drivers from Baoquan He, Manuel Schölling,
    Tony Camuso, and Toshi Kani.
 
  - System suspend/resume optimization in the ACPI battery driver from
    Lan Tianyu.
 
  - OPP (Operating Performance Points) subsystem updates from
    Chander Kashyap, Mark Brown, and Nishanth Menon.
 
  - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
    Stratos Karafotis, and Viresh Kumar.
 
  - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
    s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
    Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
    Viresh Kumar.
 
  - intel_pstate driver fixes and cleanups from Dirk Brandewie,
    Doug Smythies, and Stratos Karafotis.
 
  - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.
 
  - Fix for the cpuidle menu governor from Chander Kashyap.
 
  - New ARM clps711x cpuidle driver from Alexander Shiyan.
 
  - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
    Fabian Frederick, Pali Rohár, and Sebastian Capella.
 
  - Intel RAPL (Running Average Power Limit) driver updates from
    Jacob Pan.
 
  - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.
 
  - devfreq core updates from Chanwoo Choi and Paul Bolle.
 
  - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
    Bartlomiej Zolnierkiewicz.
 
  - turbostat tool fix from Jean Delvare.
 
  - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
    and Thomas Renninger.
 
  - New ACPI ec_access.c tool for poking at the EC in a safe way
    from Thomas Renninger.
 
 /
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQIcBAABCAAGBQJTjl16AAoJEILEb/54YlRxeKgP/RRQSV7lFtf582Dw/5M/iWOg
 qYeNtuYFLArEmJ7SpxHdKsU1ZRm3CahAS1j7grvQMQasUxTzoavMcSBNZefeaoNK
 d01LVNqcyKCZs3+izRezk5N1IY+AjdrOcqCdIk8rfgFnc6kOttYUrVcIzKuIKAvJ
 MsJ5s/uqP8G69FsAA3Ttdtr0HKiQhN4skSt424wntQRDeJNZPBs74mPKBGh8bxlO
 Zr/VCDibKQ2Z8jS7x+TzwZrOxgE1/9x0Cub6GAdTvAfS8A+utPwSkneUyopNqpQ+
 tJ5rz5R+HpmPMerizBuU+5s+tvjDPtH4/OZvOPSpYraQSFLOwx3hAm+a5k7fOGmc
 XWjXnXWT0i0V3iQkwrspTNjX1RgywbsHbmXrcWn192HResvMQ9zk2gH2ch6m8JhN
 yTV5V51dOZicpPuaTCvIkJpsV33p6vRz+EdPBiXoEdua5KKtOg8EnQ470dNaMR92
 3ZtWmIvSgGlyPyHlSHLfGXbPUwTYvDNV3aheIoXp9E6WY3WJN9J3WXm4EHKBNVaI
 H83kwuk1s92cgqh22H5Pcb0CmDcrbkUdP6hhsPS/aL80/EJMljRP2AYW1Y+l1LAf
 pzMLmekHFqQEDjFQltwGvFV/EjFeMHnqOgQONx9ygMaayCGGTYSDx3FbRDesf8t9
 qhoFcTPSxoo0XjrGrR6b
 =tpdF
 -----END PGP SIGNATURE-----

Merge tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into next

Pull ACPI and power management updates from Rafael Wysocki:
 "ACPICA is the leader this time (63 commits), followed by cpufreq (28
  commits), devfreq (15 commits), system suspend/hibernation (12
  commits), ACPI video and ACPI device enumeration (10 commits each).

  We have no major new features this time, but there are a few
  significant changes of how things work.  The most visible one will
  probably be that we are now going to create platform devices rather
  than PNP devices by default for ACPI device objects with _HID.  That
  was long overdue and will be really necessary to be able to use the
  same drivers for the same hardware blocks on ACPI and DT-based systems
  going forward.  We're not expecting fallout from this one (as usual),
  but it's something to watch nevertheless.

  The second change having a chance to be visible is that ACPI video
  will now default to using native backlight rather than the ACPI
  backlight interface which should generally help systems with broken
  Win8 BIOSes.  We're hoping that all problems with the native backlight
  handling that we had previously have been addressed and we are in a
  good enough shape to flip the default, but this change should be easy
  enough to revert if need be.

  In addition to that, the system suspend core has a new mechanism to
  allow runtime-suspended devices to stay suspended throughout system
  suspend/resume transitions if some extra conditions are met
  (generally, they are related to coordination within device hierarchy).
  However, enabling this feature requires cooperation from the bus type
  layer and for now it has only been implemented for the ACPI PM domain
  (used by ACPI-enumerated platform devices mostly today).

  Also, the acpidump utility that was previously shipped as a separate
  tool will now be provided by the upstream ACPICA along with the rest
  of ACPICA code, which will allow it to be more up to date and better
  supported, and we have one new cpuidle driver (ARM clps711x).

  The rest is improvements related to certain specific use cases,
  cleanups and fixes all over the place.

  Specifics:

   - ACPICA update to upstream version 20140424.  That includes a number
     of fixes and improvements related to things like GPE handling,
     table loading, headers, memory mapping and unmapping, DSDT/SSDT
     overriding, and the Unload() operator.  The acpidump utility from
     upstream ACPICA is included too.  From Bob Moore, Lv Zheng, David
     Box, David Binderman, and Colin Ian King.

   - Fixes and cleanups related to ACPI video and backlight interfaces
     from Hans de Goede.  That includes blacklist entries for some new
     machines and using native backlight by default.

   - ACPI device enumeration changes to create platform devices rather
     than PNP devices for ACPI device objects with _HID by default.  PNP
     devices will still be created for the ACPI device object with
     device IDs corresponding to real PNP devices, so that change should
     not break things left and right, and we're expecting to see more
     and more ACPI-enumerated platform devices in the future.  From
     Zhang Rui and Rafael J Wysocki.

   - Updates for the ACPI LPSS (Low-Power Subsystem) driver allowing it
     to handle system suspend/resume on Asus T100 correctly.  From
     Heikki Krogerus and Rafael J Wysocki.

   - PM core update introducing a mechanism to allow runtime-suspended
     devices to stay suspended over system suspend/resume transitions if
     certain additional conditions related to coordination within device
     hierarchy are met.  Related PM documentation update and ACPI PM
     domain support for the new feature.  From Rafael J Wysocki.

   - Fixes and improvements related to the "freeze" sleep state.  They
     affect several places including cpuidle, PM core, ACPI core, and
     the ACPI battery driver.  From Rafael J Wysocki and Zhang Rui.

   - Miscellaneous fixes and updates of the ACPI core from Aaron Lu,
     Bjørn Mork, Hanjun Guo, Lan Tianyu, and Rafael J Wysocki.

   - Fixes and cleanups for the ACPI processor and ACPI PAD (Processor
     Aggregator Device) drivers from Baoquan He, Manuel Schölling, Tony
     Camuso, and Toshi Kani.

   - System suspend/resume optimization in the ACPI battery driver from
     Lan Tianyu.

   - OPP (Operating Performance Points) subsystem updates from Chander
     Kashyap, Mark Brown, and Nishanth Menon.

   - cpufreq core fixes, updates and cleanups from Srivatsa S Bhat,
     Stratos Karafotis, and Viresh Kumar.

   - Updates, fixes and cleanups for the Tegra, powernow-k8, imx6q,
     s5pv210, nforce2, and powernv cpufreq drivers from Brian Norris,
     Jingoo Han, Paul Bolle, Philipp Zabel, Stratos Karafotis, and
     Viresh Kumar.

   - intel_pstate driver fixes and cleanups from Dirk Brandewie, Doug
     Smythies, and Stratos Karafotis.

   - Enabling the big.LITTLE cpufreq driver on arm64 from Mark Brown.

   - Fix for the cpuidle menu governor from Chander Kashyap.

   - New ARM clps711x cpuidle driver from Alexander Shiyan.

   - Hibernate core fixes and cleanups from Chen Gang, Dan Carpenter,
     Fabian Frederick, Pali Rohár, and Sebastian Capella.

   - Intel RAPL (Running Average Power Limit) driver updates from Jacob
     Pan.

   - PNP subsystem updates from Bjorn Helgaas and Fabian Frederick.

   - devfreq core updates from Chanwoo Choi and Paul Bolle.

   - devfreq updates for exynos4 and exynos5 from Chanwoo Choi and
     Bartlomiej Zolnierkiewicz.

   - turbostat tool fix from Jean Delvare.

   - cpupower tool updates from Prarit Bhargava, Ramkumar Ramachandra
     and Thomas Renninger.

   - New ACPI ec_access.c tool for poking at the EC in a safe way from
     Thomas Renninger"

* tag 'pm+acpi-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (187 commits)
  ACPICA: Namespace: Remove _PRP method support.
  intel_pstate: Improve initial busy calculation
  intel_pstate: add sample time scaling
  intel_pstate: Correct rounding in busy calculation
  intel_pstate: Remove C0 tracking
  PM / hibernate: fixed typo in comment
  ACPI: Fix x86 regression related to early mapping size limitation
  ACPICA: Tables: Add mechanism to control early table checksum verification.
  ACPI / scan: use platform bus type by default for _HID enumeration
  ACPI / scan: always register ACPI LPSS scan handler
  ACPI / scan: always register memory hotplug scan handler
  ACPI / scan: always register container scan handler
  ACPI / scan: Change the meaning of missing .attach() in scan handlers
  ACPI / scan: introduce platform_id device PNP type flag
  ACPI / scan: drop unsupported serial IDs from PNP ACPI scan handler ID list
  ACPI / scan: drop IDs that do not comply with the ACPI PNP ID rule
  ACPI / PNP: use device ID list for PNPACPI device enumeration
  ACPI / scan: .match() callback for ACPI scan handlers
  ACPI / battery: wakeup the system only when necessary
  power_supply: allow power supply devices registered w/o wakeup source
  ...
2014-06-04 08:57:16 -07:00
Philipp Zabel
39b9004d1f gpu: ipu-v3: Move i.MX IPUv3 core driver out of staging
The i.MX Image Processing Unit (IPU) contains a number of image processing
blocks that sit right in the middle between DRM and V4L2. Some of the modules,
such as Display Controller, Processor, and Interface (DC, DP, DI) or CMOS
Sensor Interface (CSI) and their FIFOs could be assigned to either framework,
but others, such as the dma controller (IDMAC) and image converter (IC) can
be used by both.
The IPUv3 core driver provides an internal API to access the modules, to be
used by both DRM and V4L2 IPUv3 drivers.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-06-04 11:06:52 +02:00
Linus Torvalds
49eb7b0750 TTY/Serial driver patches for 3.16-rc1
Here is the big tty / serial driver pull request for 3.16-rc1.
 
 A variety of different serial driver fixes and updates and additions,
 nothing huge, and no real major core tty changes at all.
 
 All have been in linux-next for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iEYEABECAAYFAlONXgoACgkQMUfUDdst+ymdSwCgwL0xmWjFYr/UbJ4LslOZ29Q4
 BFQAoKyYe9LsfEyodBPabxJjKUtj1htz
 =ZGSN
 -----END PGP SIGNATURE-----

Merge tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty into next

Pull tty/serial driver updates from Greg KH:
 "Here is the big tty / serial driver pull request for 3.16-rc1.

  A variety of different serial driver fixes and updates and additions,
  nothing huge, and no real major core tty changes at all.

  All have been in linux-next for a while"

* tag 'tty-3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (84 commits)
  Revert "serial: imx: remove the DMA wait queue"
  serial: kgdb_nmi: Improve console integration with KDB I/O
  serial: kgdb_nmi: Switch from tasklets to real timers
  serial: kgdb_nmi: Use container_of() to locate private data
  serial: cpm_uart: No LF conversion in put_poll_char()
  serial: sirf: Fix compilation failure
  console: Remove superfluous readonly check
  console: Use explicit pointer type for vc_uni_pagedir* fields
  vgacon: Fix & cleanup refcounting
  ARM: tty: Move HVC DCC assembly to arch/arm
  tty/hvc/hvc_console: Fix wakeup of HVC thread on hvc_kick()
  drivers/tty/n_hdlc.c: replace kmalloc/memset by kzalloc
  vt: emulate 8- and 24-bit colour codes.
  printk/of_serial: fix serial console cessation part way through boot.
  serial: 8250_dma: check the result of TX buffer mapping
  serial: uart: add hw flow control support configuration
  tty/serial: at91: add interrupts for modem control lines
  tty/serial: at91: use mctrl_gpio helpers
  tty/serial: Add GPIOLIB helpers for controlling modem lines
  ARM: at91: gpio: implement get_direction
  ...
2014-06-03 09:01:02 -07:00
Takashi Iwai
e4bdab70dd console: Use explicit pointer type for vc_uni_pagedir* fields
The vc_data.vc_uni_pagedir filed is currently long int, supposedly to
be served generically.  This, however, leads to lots of cast to
pointer, and rather it worsens the readability significantly.

Actually, we have now only a single uni_pagedir map implementation,
and this won't change likely.  So, it'd be much more simple and
error-prone to just use the exact pointer for struct uni_pagedir
instead of long.

Ditto for vc_uni_pagedir_loc.  It's a pointer to the uni_pagedir, thus
it can be changed similarly to the exact type.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28 13:37:21 -07:00
Takashi Iwai
0f2893f0d1 vgacon: Fix & cleanup refcounting
The vgacon driver prepares a two element array of uni_pagedir_loc and
uses the second item as its own reference counter for sharing the
uni_pagedir.  And the code assumes blindly that the second item is
available if the assigned vc_uni_pagedir isn't the standard one, which
might be wrong (although currently it's so).

This patch fixes that wrong assumption, and gives a slight cleanup
along with it: namely, instead of array, just give the uni_pagedir_loc
and a separate refcount variable.  It makes the code a bit more
understandable at first glance.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-28 13:37:21 -07:00
Tomi Valkeinen
f2dd36ac99 OMAPDSS: move 'compatible' converter to omapdss driver
Move the panel/encoder driver compatible-string converter from
arch/arm/mach-omap2/display.c to omapdss driver. That is a more logical
place for it, as it's really an omapdss internal hack.

The code is rewritten to follow the video node graph, starting from
omapdss. This removes the need to have the device compatible-string
database.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-28 09:25:15 +03:00
Hans de Goede
3cc6919bd6 backlight: Add backlight device (un)registration notification
Some firmware drivers, ie acpi-video want to get themselves out of the
way (in some cases) when their also is a raw backlight device available.

Due to module loading ordering being unknown, acpi-video cannot be certain
that the backlight_device_registered(BACKLIGHT_RAW) it does for this is
the final verdict wrt there being a BACKLIGHT_RAW device.

By adding notification acpi-video can listen for backlight devices showing
up after it has loaded, and unregister its backlight device if desired.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-05-27 01:29:01 +02:00
Michael Schmitz
cf8c8781d9 m68k/atari - atafb: convert allocation of fb ram to new interface
The new atari_stram_alloc interface returns kernel virtual addresses
even if the kernel runs in FastRAM. These addresses are not
guaranteed to be identical with the physical addresses. Since ST-RAM
mappings have not been set up by mem_init, virt_to_phys() and its
cousin do not work and the atari_stram_to_phys() etc. helpers must
be used to determine physical addresses.

fb.fix->smem_start needs physical addresses, fb.par->screen_base
needs virtual addresses. Take care of the virt-to-phys conversion
both on fb init and par changes.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2014-05-26 22:41:24 +02:00
Tomi Valkeinen
2b22df835b OMAPDSS: HDMI: fix devm_ioremap_resource error checks
devm_ioremap_resource returns ERR_PTR on error, not NULL. Fix the
error checks in the driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 14:50:09 +03:00
Tomi Valkeinen
2dcfdc3066 OMAPDSS: HDMI: remove unused defines
Remove some unused defines from the HDMI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 14:40:47 +03:00
Tomi Valkeinen
fc2daf3b1d OMAPDSS: HDMI: cleanup WP ioremaps
Commit 59b3d38a36 missed cleaning up the
hdmi_wp.c file.

Clean up hdmi_wp.c the same way as the others.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 14:37:44 +03:00
Zhichuang SUN
fbc6c4a13b drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap
Function unifb_mmap calls functions which are defined in linux/mm.h
and asm/pgtable.h

The related error (for unicore32 with unicore32_defconfig):
	CC      drivers/video/fbdev/fb-puv3.o
	drivers/video/fbdev/fb-puv3.c: In function 'unifb_mmap':
	drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of
				      function 'vm_iomap_memory'
	drivers/video/fbdev/fb-puv3.c:646: error: implicit declaration of
				      function 'pgprot_noncached'

Signed-off-by: Zhichuang Sun <sunzc522@gmail.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Joe Perches <joe@perches.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: linux-fbdev@vger.kernel.org
Acked-by: Xuetao Guan <gxt@mprc.pku.edu.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 13:51:10 +03:00
Rickard Strandqvist
0c641bff31 video: fbdev: s3fb.c: Fix for possible null pointer dereference
There is otherwise a risk of a possible null pointer dereference.

Was largely found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 13:47:31 +03:00
Rickard Strandqvist
d9a5f87c8f video: fbdev: grvga.c: Fix for possible null pointer dereference
There is otherwise a risk of a possible null pointer dereference.

Was largely found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 13:47:31 +03:00
Mikulas Patocka
972754cfae matroxfb: perform a dummy read of M_STATUS
I had occasional screen corruption with the matrox framebuffer driver and
I found out that the reason for the corruption is that the hardware
blitter accesses the videoram while it is being written to.

The matrox driver has a macro WaitTillIdle() that should wait until the
blitter is idle, but it sometimes doesn't work. I added a dummy read
mga_inl(M_STATUS) to WaitTillIdle() to fix the problem. The dummy read
will flush the write buffer in the PCI chipset, and the next read of
M_STATUS will return the hardware status.

Since applying this patch, I had no screen corruption at all.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 13:44:25 +03:00
Boris BREZILLON
80c68c1e2e video: of: display_timing: fix default native-mode setting
Set native mode to the first child node of the display-timings node and not
the first child node of the display-timings parent node.

Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-23 13:31:19 +03:00
Alexandre Belloni
16fc3352ea pwm-backlight: retrieve configured PWM period
The PWM core is now able to initialize the PWM period from a lookup
table defined by board files. Use it if available and fallback to the
value supplied in pwm_period_ns.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-21 11:19:45 +02:00
Tomi Valkeinen
b36250d8b5 OMAPDSS: panel NEC-NL8048HL11 DT support
We don't have any working boards using this panel right now, and the
panel driver looks odd compared to the panel specs. For example, the
panel spec does not mention any QVGA pin.

So, while this patch adds DT support to the driver, it's not really
supported and there are not bindings documentation for the panel until
someone can verify how the panel actually works.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Erik Gilling <konkers@android.com>
2014-05-20 14:39:47 +03:00
Tomi Valkeinen
597cc1e451 OMAPDSS: Panel TPO-TD043MTEA1 DT support
Add DT support for panel TPO-TD043MTEA1.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Grazvydas Ignotas <notasas@gmail.com>
2014-05-20 14:39:46 +03:00
Tony Lindgren
be88c16a22 OMAPDSS: panel sharp-ls037v7dw01 DT support
Add DT support for sharp-ls037v7dw01.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-20 14:39:45 +03:00
Tony Lindgren
9522f9fe86 OMAPDSS: panel-sharp-ls037v7dw01: update to use gpiod
Using gpiod will make it easier to add device tree support
for this panel in the following patches.

Note that all the GPIOs for this panel are optional, any
of the the GPIOs could be configured with external pulls
instead of GPIOs, so let's not error out if GPIOs are not
found to make the panel more generic.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-20 14:39:45 +03:00
Tomi Valkeinen
1b71f1047e OMAPDSS: panel-lgphilips-lb035q02: Add DT support
Add DT support for panel-lgphilips-lb035q02.

We disable the use of the backlight_gpio as it should be handled via
backlight framework with DT boots.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Florian Vaussard <florian.vaussard@epfl.ch>
2014-05-20 14:39:39 +03:00
Tomi Valkeinen
fbf7309823 OMAPDSS: panel-lgphilips-lb035q02: use gpiod for enable gpio
The new gpiod API supports automatic handling of active-high/active-low
with DT. To make it possible to use that when booting with DT, change
the driver's handling of the enable GPIO to use gpiod.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-20 09:35:40 +03:00
Jyri Sarha
e2ccb0eee5 OMAPDSS: hdmi5_core: Fix compilation with OMAP5_DSS_HDMI_AUDIO
Use correct variable name for base address.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-19 16:27:07 +03:00
Tomi Valkeinen
c6e29d26df OMAPDSS: panel-dpi: enable-gpio
The enable gpio should be optional, but the driver returns an error if
it doesn't get the gpio.

So change the driver to accept -ENOENT error.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Joachim Eastwood <manabian@gmail.com>
2014-05-19 16:26:58 +03:00
Julia Lawall
3f513f4cc4 video: delete unneeded call to platform_get_drvdata
Platform_get_drvdata is an accessor function, and has no purpose if its
result is not used.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
type T;
@@
- T x = platform_get_drvdata(...);
... when != x
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-19 16:03:57 +03:00
Alexander Stein
7edaa761ee video: mx3fb: Add backlight control support
This patch add backlight control support to allow dimming the backlight
using the internal PWM. Currently the brightness is set fixed to a
maximum of 255.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-16 11:58:39 +03:00
Aaro Koskinen
7ceb1892c0 video: omap: delete support for early fbmem allocation
Commit 1e434f9318 (OMAPFB: remove early mem
alloc from old omapfb) deleted the support for early fbmem allocation
from the platform code, but some code still remains in the driver side.
Delete this code now, as it repotedly causes build issues on !MMU.

The patch was tested on Amstrad E3 and Nokia 770 and framebuffer
functionality is not affected.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-16 11:56:12 +03:00
Lucas Stach
dc42715faf video: of: display_timing: remove two unsafe error messages
The error message would try to dereference the pointer that
just has been tested to be NULL. As those messages don't
really add any value without the info that the np could
provide, just remove them.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-15 13:47:11 +03:00
Rusty Russell
43d910ff15 drivers/video/fbdev/sm501fb.c: avoid world-writable sysfs files.
In line with practice for module parameters, we're adding a build-time
check that sysfs files aren't world-writable.

Cc: Vincent Sanders <vince@simtec.co.uk>
Cc: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-05-14 10:53:54 +09:30
Tomi Valkeinen
d80e02ef34 OMAPDSS: Fix writes to DISPC_POL_FREQ
When omapdss writes to DISPC_POL_FREQ register, it always ORs the bits
with the current contents of the register, never clearing the old ones,
causing wrong signal polarity settings.

As we write all the bits in DISPC_POL_FREQ, we don't need to care about
the current contents of the register. So fix the issue by constructing
new register value from scratch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:28:39 +03:00
Tomi Valkeinen
59b3d38a36 OMAPDSS: HDMI: cleanup ioremaps
Now that all the boards using OMAP HDMI are using DT boot, we can remove
the hacks for getting the ioresources with non-DT boot.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:30 +03:00
Tomi Valkeinen
f5bab22291 OMAPDSS: HDMI: Add OMAP5 HDMI support
This adds a new driver to omapdss for OMAP5 HDMI. However, the new
driver uses common HDMI files which are shared with OMAP4 HDMI driver.

OMAP5 HDMI has a different HDMI core IP compared to OMAP4, but has very
similar PLL and PHY IPs which can be handled with common code.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:30 +03:00
Archit Taneja
2d64b1b314 OMAPDSS: HDMI: PLL changes for OMAP5
Add a features struct to differentiate between the HDMI PLLs on OMAP4
and OMAP5. The OMAP5 PLL is more sensitive when it comes to locking.  We
need to ensure that the DCO freq isn't too low for lower pixel clocks.

Modify the PLL computation slightly to ensure the HDMI PLL locks for lower
frequencies. This will be later replaced by a more complex computation
which makes sure all the PLL constraints are met.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:29 +03:00
Archit Taneja
19289fdcbe OMAPDSS: HDMI: PHY changes for OMAP5
OMAP5 HDMI PHY has some differences compared to OMAP4 HDMI PHY. This
patch creates a features struct which help the driver configure the PHY
based on what SoC it is.

Some of the features aren't currenlty used, but will come in use later.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:29 +03:00
Archit Taneja
8955b727af OMAPDSS: HDMI: support larger register offsets for OMAP5 HDMI core
The HDMI core IP on OMAP5 has a wider address range for registers. The offsets
for the later registers can't fit into the u16 type currently used for hdmi
register read and write functions. Use u32 for offsets instead.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:29 +03:00
Tomi Valkeinen
dcf5f7299e OMAPDSS: HDMI: move irq & phy pwr handling
HDMI IRQ handling was moved into hdmi_phy.c when restructuring the HDMI
driver. While this worked fine, it's not correct.

The HDMI IRQ handling should be either in the hdmi_wp, or in the main
hdmi driver. This patch moves the handling to the main hdmi driver, as I
feel it's a more appropriate choice.

This move also requires changing the handling of the PHY power, as that
was partly handled in the IRQ handler. The PHY power is handled via the
WP module. An option would be to give HDMI PHY driver function pointers
that it could use to manage the PHY power, but as the PHY power is not
needed to access the PHY registers, the handling was also moved to the
main HDMI driver. This could be changed later if need be.

Note that there's slightly similar power issue with the PLL: the HDMI
PLLs power is also handled via the WP module. For now, the PLL power
handling is still done inside the PLL driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:28 +03:00
Tomi Valkeinen
543e761fb9 OMAPDSS: HDMI: improve Makefile
We'll soon add support for OMAP5 HDMI, which uses some of the same files
as OMAP4 HDMI does.

This patch adds a new config entry "OMAP2_DSS_HDMI_COMMON", which both
OMAP4 and OMAP5 HDMI config entries can select. OMAP2_DSS_HDMI_COMMON
will cause the common HDMI files to be compiled.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:28 +03:00
Tomi Valkeinen
bd3ad6a4fc OMAPDSS: DSI: Add OMAP5 DSI module IDs
Add OMAP5 DSI module ID support to the OMAP DSI driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:28 +03:00
Tomi Valkeinen
35fd32d600 OMAPDSS: DPI: fix LCD3 DSI source
At the moment the dpi driver does not handle LCD3 clock source at all.

LCD3 channel gets the DSI PLL clock from DSI2 instance. Add support for
LCD3's clock source in the dpi driver.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:28 +03:00
Tomi Valkeinen
5b3075ced1 OMAPDSS: features: fix OMAP5 features
OMAP5 has LCD3 overlay manager, and total 4 overlay managers. These are
not correctly defined in the dss features. Fix them.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:27 +03:00
Tomi Valkeinen
2e7e6b6892 OMAPDSS: DSS & DISPC DT support for OMAP5
Add omap5 entries to dispc's and dss's of_device_id tables.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:27 +03:00
Sathya Prakash M R
d6279d4ae1 OMAPDSS: Add DSS features for AM43xx
Add DSS features for AM43xx.

Signed-off-by: Sathya Prakash M R <sathyap@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 15:11:26 +03:00
Tomi Valkeinen
246def36e2 OMAPDSS: remove venc_panel.c
The use of venc_panel.c was removed in
09d2e7cdeb (OMAPDSS: VENC: remove code
related to old panel model), but the file itself was left behind. Remove
the unused file.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 13:24:10 +03:00
Archit Taneja
0059277276 omapdss: remove check for simpler port/endpoint binding
The support for simpler port/endpoint binding was removed in the merged version
of omapdss DT. But dss_init_ports still tries to get to an endpoint even if no
port exists. Remove this as this doesn't work.

Signed-off-by: Archit Taneja <archit@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:58:04 +03:00
Fabian Frederick
a41ca72e57 OMAPDSS: add __exit to dss_uninit_ports
dss_uninit_ports is only called by __exit omap_dsshw_remove

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-omap@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:56:32 +03:00
Fabian Frederick
34bdb666f4 fbdev: fbmem: remove positive test on unsigned values
fb_image.dx, fb_image.dy and fbconf2bmap.framebuffer are __u32

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:49 +03:00
Masami Ichikawa
7a966fbd78 fbcon: Fix memory leak in con2fb_release_oldinfo()
kmemleak reported a memory leak as below.

unreferenced object 0xffff8800dab6d8d8 (size 96):
  comm "swapper/0", pid 1, jiffies 4294877598 (age 38.483s)
  hex dump (first 32 bytes):
    00 00 00 00 00 01 00 00 08 00 00 00 10 00 00 00  ................
    07 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814e8f2e>] kmemleak_alloc+0x4e/0xb0
    [<ffffffff811a0600>] __kmalloc+0x280/0x320
    [<ffffffff81309b61>] soft_cursor+0x231/0x290
    [<ffffffff81309393>] bit_cursor+0x613/0x650
    [<ffffffff8130556b>] fbcon_cursor+0x13b/0x1c0
    [<ffffffff813755f8>] hide_cursor+0x28/0xa0
    [<ffffffff81376e98>] redraw_screen+0x168/0x240
    [<ffffffff81303891>] fbcon_prepare_logo+0x381/0x420
    [<ffffffff81303c7e>] fbcon_init+0x34e/0x590
    [<ffffffff81375828>] visual_init+0xb8/0x120
    [<ffffffff81377c93>] do_bind_con_driver+0x163/0x380
    [<ffffffff81378494>] do_take_over_console+0x114/0x1c0
    [<ffffffff81303f23>] do_fbcon_takeover+0x63/0xd0
    [<ffffffff813086dd>] fbcon_event_notify+0x68d/0x7e0
    [<ffffffff814ff7ac>] notifier_call_chain+0x4c/0x70
    [<ffffffff8108c85d>] __blocking_notifier_call_chain+0x4d/0x70

This memory leak cause is, fbcon_ops's cursor_src is allocated in
soft_cursor() but not released in con2fb_release_oldinfo().
so, cursor_src is needed to be released when oldinfo is going to be
released.

Signed-off-by: Masami Ichikawa <masami256@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:49 +03:00
Jean Delvare
632de707b7 video: Kconfig: Add a dependency to the Goldfish framebuffer driver
All other Goldfish drivers depend on GOLDFISH, I see no reason why the
framebuffer driver would be an exception.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:48 +03:00
Jean Delvare
5fb7652beb video: exynos: Add a dependency to the menu
All drivers under menu EXYNOS_VIDEO depend on either ARCH_S5PV210 or
ARCH_EXYNOS, so add these as dependencies to the menu itself. This
avoids presenting an empty and useless menu on other architectures.

Then drivers under the menu only need a dependency if they depend on
one of the supported architectures specifically.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:48 +03:00
Denis Carikli
c58f66165d video: mx3fb: Use devm_kzalloc
Replace kzalloc by devm_kzalloc and remove the kfree() calls.

Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:48 +03:00
Arnd Bergmann
e3e11f5163 video/nuc900: allow modular build
The frame buffer core may be a loadable module, and in this
case, the nuc900 driver cannot be built-in. Turning it into
a tristate option lets Kconfig work out the dependency and
avoid broken builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:47 +03:00
Arnd Bergmann
3cdd153717 video: atmel needs FB_BACKLIGHT
The atmel frame buffer driver doesn't build if FB_BACKLIGHT
is disabled, so select it here as we do for lots of other
drivers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:47 +03:00
Arnd Bergmann
23e51f87f3 video: export fb_prepare_logo
Some drivers that may be loadable modules use the fb_prepare_logo
function, so we have to export it. Found during randconfig
builds with mmpfb.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:47 +03:00
Arnd Bergmann
fabd3152fb video/mbx: fix building debugfs support
The mbx framebuffer debugfs support apparently hasn't been able
to build for a long time, at least since 2006 when the u.generic_ip
field in the inode was removed. This fixes the obvious bug, and
also makes it possible to build the driver as a module when
debugfs support is enabled, by simply including the C file.
It's ugly, but it won't make the driver any worse than it
already is, and doesn't require a more invasive change that
might break it further.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Raphael Assenat <raph@8d.com>
Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:46 +03:00
Arnd Bergmann
81c44c2b2c video/omap: fix modular build
The framebuffer layer can be a loadable module, which forces
omapfb to be a module as well. However, this breaks the lcd
drivers, which are linked into the omapfb driver but each
have their own module_init() function. To solve this,
we split out the lcd drivers into separate modules and
export omapfb_register_panel, which is the only interface
required between the main omapfb driver and the lcd panel
drivers.

We also have to introduce a new Kconfig symbol for H3, since
that lcd driver has a dependency on TPS65010, which we can
express better in Kconfig than Makefile syntax.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:46 +03:00
Arnd Bergmann
f7200b6834 video: clarify I2C dependencies
We can only use I2C support in frame buffer drivers if
Either I2C is built-in, or both I2C and the driver itself
are loadable modules.

Fix this dependency for MB862XX and CyberPro frame buffers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:45 +03:00
Arnd Bergmann
24f13a6679 video: omap2dss: fix LPAE warnings
If LPAE is enabled, dma_addr_t is 64 bit, so we have to
change a few type for everything in this driver to match
again.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Cc: linux-omap@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:55:18 +03:00
Marek Belisko
c84d95058a omapdss: panel-tpo-td028ec1: Add module alias
Add module alias string to make it working when panel is compiled as module.
Without this change panel module is not probed thus display is not working.

Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:35:51 +03:00
Marek Belisko
1f32450911 omapdss: panel-tpo-td028ec1: Add DT support.
Signed-off-by: Marek Belisko <marek@goldelico.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-09 12:35:51 +03:00
Masanari Iida
39a6ec28bd video/backlight: s6e63m0: Fix string type mismatch
Fix string type mismatch in s6e63m0_sysfs_show_gamma_table().
gamma_table_count is defined as unsigned int.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-05-07 11:12:51 +01:00
Arnd Bergmann
423431a3b5 video: sh_mobile_lcdcfb depends on meram
The sh_mobile_lcdcfb driver calls interfaces provided
by the corresponding "meram" helper. This fails if meram
is a module but lcdcfb is built-in.

To work around it, this uses special Kconfig magic to
only allow lcdcfb to be built if
a) both are modules,
b) meram is built-in, or
c) meram is disabled and the helpers stubbed out

Changing meram from 'y' to 'm' now forces clcd to
be a module as well, which seems to be the desired
behavior.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: linux-sh@vger.kernel.org
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07 12:16:33 +03:00
Tomi Valkeinen
02b7a32083 OMAPDSS: DSI: set regulator voltage to 1.8V
Set the DSI vdd regulator voltage to the required 1.8V.

This is required for the case when the regulator in the DT data defines
a range of allowed voltages. In this case it's required to set the
voltage, as otherwise enabling the voltage fails.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07 11:31:27 +03:00
Tomi Valkeinen
818a053c54 OMAPDSS: HDMI4: set regulator voltage to 1.8V
Set the HDMI vdda regulator voltage to the required 1.8V.

This is required for the case when the regulator in the DT data defines
a range of allowed voltages. In this case it's required to set the
voltage, as otherwise enabling the voltage fails.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07 11:31:23 +03:00
Tomi Valkeinen
2f5dc676bf OMAPDSS: HDMI: lane config support
Add support to configure the pins used for the HDMI lanes. The order and
polarity of the lanes can be defined in the DT data.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07 11:31:11 +03:00
Tomi Valkeinen
2c75e3cb6e OMAPDSS: connector-hdmi: hpd support
Add support to handle HPD GPIO in the HDMI connector driver. For the
time being, the driver only uses HPD GPIO to report is the cable is
connected via detect() calll.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07 11:29:38 +03:00
Alexandre Courbot
257462dbf3 pwm-backlight: switch to gpiod interface
Switch to the new gpiod interface, which allows to handle GPIO
properties such as active low transparently and removes a whole bunch of
code.

There are still a couple of users of this driver that rely on passing
the enable GPIO number through platform data, so a fallback mechanism
using a GPIO number is still available to avoid breaking them. It will
be removed once current users have switched to the GPIO lookup tables
provided by the gpiod interface.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2014-05-07 10:15:31 +02:00
Tomi Valkeinen
4843a0582b OMAPDSS: panel-dpi: Add DT support
Add DT support for panel-dpi.

We disable the use of the backlight_gpio as it should be handled via
backlight framework with DT boots.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Archit Taneja <archit@ti.com>
2014-05-07 11:00:04 +03:00
Tomi Valkeinen
56610d9c11 OMAPDSS: panel-dpi: use gpiod for enable gpio
The new gpiod API supports automatic handling of active-high/active-low
with DT. To make it possible to use that when booting with DT, change
the panel-dpi's handling of the enable GPIO to use gpiod.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-05-07 10:58:22 +03:00
Thierry Reding
5f33b89624 pwm-backlight: Disable backlight on shutdown
When a device is shut down, make sure to disable the backlight. If it
stays lit, it gives the impression that the device hasn't turned off.
Furthermore keeping the backlight on may consume power, which is not
what users expect when they shut down a device.

Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-05-02 13:25:59 +02:00
Jean Delvare
81fe17b94b fbdev: Fix tmiofb driver dependencies
The tmiofb driver should not depend on MFD_CORE but on MFD_TMIO.
Without the tmio_core driver, tmiofb has no platform device to bind
to and is thus useless.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30 14:04:48 +03:00
Jingoo Han
9b22b8c52f video: pxa3xx-gcu: use devm_ioremap_resource()
Use devm_ioremap_resource() because devm_request_and_ioremap() is
obsoleted by devm_ioremap_resource().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30 14:02:15 +03:00
Dan Carpenter
a513ad2d6d video: mmpfb: cleanup some static checker warnings in probe()
Sparse complains about using zero instead of NULL for pointers.
Probably, if we enabled the warning, then GCC would complain about the
unused initializers.  I've just removed them.

Smatch complains that we first check if "fbi" is NULL and then
dereference it in the error handling.  It turns out that "fbi" can't be
NULL so I've removed the check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30 13:57:29 +03:00
Richard Weinberger
c150a2803d video: mmp: Remove references to CPU_PXA988
References to the Kconfig symbol CPU_PXA988 were added to the tree in
v3.9. But that Kconfig symbol has never been part of the tree. So get
rid of these references.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30 11:36:48 +03:00
Richard Weinberger
6e860a1aed video: mmp: Remove references to CPU_MMP3
References to the Kconfig symbol CPU_MMP3 were added to the tree since
v3.6. But that Kconfig symbol has never been part of the tree. So get
rid of these references.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30 11:36:38 +03:00
Masanari Iida
7e81b9ddf2 video: fbdev: Fix format string mismatch in gbefb.c
Fix format string mismatch in gbefb_show_memsize().

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30 11:24:40 +03:00
Masanari Iida
3ea4ccd004 video: fbdev: Fix format string mismatch in wm8505fb.c
Fix format string mismatch in contrast_show().

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-30 11:24:40 +03:00
Peter Griffin
513199368a video/backlight: LP8788 needs PWM
The LP8788 driver cannot be successfully built if we don't
enable the PWM subsystem. This patch makes that dependency
explicit in Kconfig and prevents broken randconfig builds.

Based on Arnd Bergmann patch but split out into seperate
commits per driver based on feedback.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Acked-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-28 11:22:01 +01:00
Arnd Bergmann
91a57dc134 video/backlight: LP855X needs PWM
The LP855X driver cannot be successfully built if we don't
enable the PWM subsystem. This patch makes that dependency
explicit in Kconfig and prevents broken randconfig builds.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Acked-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-28 11:21:25 +01:00
Arnd Bergmann
e6162f3ece video/pxa: LCD_CORGI needs BACKLIGHT_CLASS_DEVICE
This fixes a randconfig build error when BACKLIGHT_CLASS_DEVICE
is disabled, by describing the dependency in Kconfig,
as we do for the other drivers in this directory.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-28 11:21:03 +01:00
Peter Griffin
05c4cc0f95 video/backlight: LM3630A needs PWM
The LM3630A driver cannot be successfully built if we don't
enable the PWM subsystem. This patch makes that dependency
explicit in Kconfig and prevents broken randconfig builds.

Based on Arnd Bergmann patch but split out into seperate
commits per driver based on feedback.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Bryan Wu <cooloney@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-28 11:19:52 +01:00
David Ung
e6853aafd4 video: Check EDID for HDMI connection
Check EDID Vendor Specific Data Block bytes to see if the connection
is HDMI and set FB_MISC_HDMI.

Signed-off-by: David Ung <davidu@nvidia.com>
Signed-off-by: Christopher Freeman <cfreeman@nvidia.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-22 08:51:29 +03:00
Jon Ringle
f474f0e1fb video: da8xx-fb: Add support for Densitron 84-0023-001T
Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-22 08:51:27 +03:00
Tomi Valkeinen
776bbb97e0 video: Kconfig: move drm and fb into separate menus
At the moment the "Device Drivers / Graphics support" kernel config page
looks rather messy, with DRM and fbdev driver selections on the same
page, some on the top level Graphics support page, some under their
respective subsystems.

If I'm not mistaken, this is caused by the drivers depending on other
things than DRM or FB, which causes Kconfig to arrange the options in
not-so-neat manner.

Both DRM and FB have a main menuconfig option for the whole DRM or FB
subsystem. Optimally, this would be enough to arrange all DRM and FB
options under the respective subsystem, but for whatever reason this
doesn't work reliably.

This patch adds an explicit submenu for DRM and FB, making it much
clearer which options are related to FB, and which to DRM.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17 08:10:20 +03:00
Tomi Valkeinen
19757fc843 fbdev: move fbdev core files to separate directory
Instead of having fbdev framework core files at the root fbdev
directory, mixed with random fbdev device drivers, move the fbdev core
files to a separate core directory. This makes it much clearer which of
the files are actually part of the fbdev framework, and which are part
of device drivers.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17 08:10:19 +03:00
Tomi Valkeinen
f7018c2135 video: move fbdev to drivers/video/fbdev
The drivers/video directory is a mess. It contains generic video related
files, directories for backlight, console, linux logo, lots of fbdev
device drivers, fbdev framework files.

Make some order into the chaos by creating drivers/video/fbdev
directory, and move all fbdev related files there.

No functionality is changed, although I guess it is possible that some
subtle Makefile build order related issue could be created by this
patch.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Rob Clark <robdclark@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-04-17 08:10:19 +03:00
Steven Miao
c26ef3eb3c video: bf54x-lq043fb: fix build error
Fix build error by including linux/gpio.h. Also drop asm/gpio.h which is
not needed.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-15 12:44:16 +03:00
Jyri Sarha
5c348ba96c OMAPDSS: Change struct reg_field to dispc_reg_field
Avoid colision with regmap's struct reg_field definition by renaming
omapdss's struct reg_field to dispc_reg_field, and moving it inside
dispc.c as that's the only place it is used.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-14 16:42:49 +03:00
Jyri Sarha
a57a22c817 OMAPDSS: Take pixelclock unit change into account in hdmi_compute_acr()
Pixelclock unit change from kHz to Hz should be taken into account
in CTS value calculations in hdmi_compute_acr().

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-14 16:17:26 +03:00
Tomi Valkeinen
0925afc9a4 OMAPDSS: fix shared irq handlers
DSS uses shared irq handlers for DISPC and DSI, because on OMAP3, the
DISPC and DSI share the same irq line.

However, the irq handlers presume that the hardware is enabled, which,
in theory, may not be the case with shared irq handlers. So if an
interrupt happens while the DISPC/DSI is off, the kernel will halt as
the irq handler tries to access the DISPC/DSI registers.

In practice that should never happen, as both DSI and DISPC are in the
same power domain. So if there's an IRQ for one of them, the other is
also enabled. However, if CONFIG_DEBUG_SHIRQ is enabled, the kernel will
generate a spurious IRQ, which then causes the problem.

This patch adds an is_enabled field for both DISPC and DSI, which is
used to track if the HW is enabled. For DISPC the code is slightly more
complex, as the users of DISPC can register the interrupt handler, and
we want to hide the is_enabled handling from the users of DISPC.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-14 14:52:08 +03:00
Alexander Shiyan
25e475e11d video: imxfb: Select LCD_CLASS_DEVICE unconditionally
FB driver uses lowlevel controls for LCD powering and contrast changing.
Since LCD class cannot be used as an optional feature and should be
compiled for using in the driver, this patch selects LCD_CLASS_DEVICE
symbol for the driver.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-14 14:52:08 +03:00
Tomi Valkeinen
d0e224f996 OMAPDSS: fix rounding when calculating fclk rate
"clk: divider: fix rate calculation for fractional rates" patch (and
similar for TI specific divider) fixes the clk-divider's rounding. This
patch updates the DSS driver to round the rates accordingly.

This fixes the DSS's warnings about clock rate mismatch, and also fixes
the wrong fclk rate being set.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Tested-by: Marek Belisko <marek@goldelico.com>
2014-04-14 14:52:08 +03:00
Jon Ringle
8d018647e0 video: da8xx-fb: Fix casting of info->pseudo_palette
The casting to (u16 *) on info->pseudo_palette is wrong and causes the
display to show a blue (garbage) vertical line on every other pixel column

Signed-off-by: Jon Ringle <jringle@gridpoint.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-14 14:52:07 +03:00
Linus Torvalds
edf2377c47 - Call put_device() instead of kfree() - core
- Add DT support - gpio-backlight
  - Use managed resources - lm3639_bl
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTRTU4AAoJEFGvii+H/HdhAe8QAK9E9DwDMItv0HNCtbEe/FUd
 SU4cXvZXaBe+Zr0xc7qA4Z71PCdrf7R9UfGay7DikuO47BzQ5idwGSjcSyyg7IJL
 QHjkjGIRea1JuYMCXcFjBUsnsXBcb4E5masYijcOwuKMewnlwwTteDN8czEkAKN7
 aKTEHcTWcJkVl7HcFiKn+QoqXvnPb7EXGCB//dug3jbo/F9xQ3Zn6zpNbc1fm9Ge
 rgsy0mg4idxqWj0hcnmIvKBFbmzpwwSJHGZfQcpwCB/T4fCf+bHm07DUhub54biA
 n8/EwFaGkFZ58QjwRcnkcKw2zzTd2OnyB9CtuZY3ByEysknQMEvazZcqaRyoXZIa
 09qiFanYD4WblUJtK9ArCc8iiYTstYYzVf42G7Hb4Zb313vJgeisYTPh5PBB5Y1x
 9LdF4YCFnGyqbtAHG7P600l++2ogjqpbU/NugqYaSPgugPEjit5zePxepHVehDvY
 CNkEgfkq0WlkmcTI1CgKqsJphslGkY3KsWgcSadCpf21tLOhtu7r1bNzartVrbR9
 THr+I60c4++z0/r/BYEvdnviLUX+nBd1zeH4KQ6aFTJYQ9S/tv/OTGTU2cirDSL6
 mq37nd1Ky4tjXGJBZOjJLJAGB5S645YCOlgCQ7lBvMnN2jCawgCrY16FN3JadpOm
 dizYOK7hDq0WDpmMioKY
 =qva8
 -----END PGP SIGNATURE-----

Merge tag 'backlight-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight

Pull backlight changes from Lee Jones:
 - core: call put_device() instead of kfree()
 - gpio-backlight: add DT support
 - lm3639_bl driver: use managed resources

* tag 'backlight-for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: lm3639: Use devm_backlight_device_register()
  backlight: gpio-backlight: Add DT support
  backlight: core: Replace kfree with put_device
2014-04-10 08:52:35 -07:00
Linus Torvalds
e9f37d3a8d Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "Highlights:

   - drm:

     Generic display port aux features, primary plane support, drm
     master management fixes, logging cleanups, enforced locking checks
     (instead of docs), documentation improvements, minor number
     handling cleanup, pseudofs for shared inodes.

   - ttm:

     add ability to allocate from both ends

   - i915:

     broadwell features, power domain and runtime pm, per-process
     address space infrastructure (not enabled)

   - msm:

     power management, hdmi audio support

   - nouveau:

     ongoing GPU fault recovery, initial maxwell support, random fixes

   - exynos:

     refactored driver to clean up a lot of abstraction, DP support
     moved into drm, LVDS bridge support added, parallel panel support

   - gma500:

     SGX MMU support, SGX irq handling, asle irq work fixes

   - radeon:

     video engine bringup, ring handling fixes, use dp aux helpers

   - vmwgfx:

     add rendernode support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (849 commits)
  DRM: armada: fix corruption while loading cursors
  drm/dp_helper: don't return EPROTO for defers (v2)
  drm/bridge: export ptn3460_init function
  drm/exynos: remove MODULE_DEVICE_TABLE definitions
  ARM: dts: exynos4412-trats2: enable exynos/fimd node
  ARM: dts: exynos4210-trats: enable exynos/fimd node
  ARM: dts: exynos4412-trats2: add panel node
  ARM: dts: exynos4210-trats: add panel node
  ARM: dts: exynos4: add MIPI DSI Master node
  drm/panel: add S6E8AA0 driver
  ARM: dts: exynos4210-universal_c210: add proper panel node
  drm/panel: add ld9040 driver
  panel/ld9040: add DT bindings
  panel/s6e8aa0: add DT bindings
  drm/exynos: add DSIM driver
  exynos/dsim: add DT bindings
  drm/exynos: disallow fbdev initialization if no device is connected
  drm/mipi_dsi: create dsi devices only for nodes with reg property
  drm/mipi_dsi: add flags to DSI messages
  Skip intel_crt_init for Dell XPS 8700
  ...
2014-04-08 09:52:16 -07:00
Daniel Jeong
f1740e4cff backlight: lm3639: Use devm_backlight_device_register()
Change to use devm_backlight_device_register() for simple cleanup.

Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-08 13:20:41 +01:00
Denis Carikli
9a6adb339e backlight: gpio-backlight: Add DT support
Signed-off-by: Denis Carikli <denis@eukrea.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-08 13:20:40 +01:00
Levente Kurusa
35762a47c0 backlight: core: Replace kfree with put_device
As per the comments on device_register, we shouldn't call kfree()
right after a device_register() failure. Instead call put_device(),
which in turn will call bl_device_release resulting in a kfree to the
full structure.

Signed-off-by: Levente Kurusa <levex@linux.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-04-08 13:20:39 +01:00
Linus Torvalds
0af9fb6391 fbdev changes for 3.15 (OMAP)
This contains OMAP related fbdev changes for 3.15. The bulk of the patches are
 for adding Device Tree support for OMAP Display Subsystem:
 
 * SoCs: OMAP2/3/4
 
 * Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM, OMAP3
   IGEP0020, OMAP3 N900
 
 * Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony acx565akm panel,
   MIPI DSI Command mode panel and HDMI, DVI and Analog TV connectors
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTQmaWAAoJEPo9qoy8lh71LS8P+QHkUWD22XhPqt2NaeIxFhzU
 rq7uW7iMtzIawb+y2+GLHykk4obmJKzpanhe+p3dZMSEG8O4s6IyRx8LoJGLeWoP
 LtnV77Fbh3p9Bn1nLkDmszbcdSSbH8VseykfV5yCJ0lhTPjUXwm3JBFJ57AtOqeF
 ya/13NCKR0v2FFCy89rOc9Iu+dYbVVNakTWcN1qcZOSjNQ6cLWyq97OmC4BD2mkC
 H9u4XC/+UC6WJZT0PVs9cPn7D2QCt1ZR8eULmSL3YO2rXdLLfL87brtCS1uMNXk2
 MUq9KVS1Iw+6yk248F9AyHkg5nZOzWoeXxZj0m48kaLlFBfkGuuiRSJZhc5qgBtm
 61X6eQDclJUo1tgEmtH1wCFe4M3vZ0ImK21bX3PXO+IBgz4Zb3e3uqOAJy4LREJk
 KZnjfwn/Gyp0D21YSZvquAZ+qZeZMttiwIlZVD26+Xt7GincC5e/HPi58nJ5IcQQ
 BuUsjI8fjFcYTf5O2DqdAaYo3cpt8tfUwCXL6Iw32SYi4xz1Rocmxe/xnGCUxZHk
 j3qAT5NkHcQL5xSMZgNQUyyqST1Ey9lgmLlQmnxknRPCOW35tbRo621CNz+5Z0MR
 TJDu5REahAS7jEmeAjD1m1Xs4X0tYltiPgnbCwFtNHCvTdnw3R916quqRcQKaP6d
 Irzufbo2EoTG8cVhvE8e
 =Mnc1
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull OMAP fbdev changes from Tomi Valkeinen:
 "This is based on the already pulled fbdev-main changes, and this also
  merges .dts branch from Tony Lindgren (which has also been pulled), so
  that I was able to add the display related .dts changes.

  This contains OMAP related fbdev changes for 3.15.  The bulk of the
  patches are for adding Device Tree support for OMAP Display Subsystem:

   - SoCs: OMAP2/3/4

   - Boards: OMAP4 Panda, OMAP4 SDP, OMAP3 Beagle, OMAP3 Beagle-xM,
     OMAP3 IGEP0020, OMAP3 N900

   - Devices: TFP410 Encoder, tpd12s015 HDMI companion chip, Sony
     acx565akm panel, MIPI DSI Command mode panel and HDMI, DVI and
     Analog TV connectors"

* tag 'fbdev-omap-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (45 commits)
  OMAPDSS: HDMI: fix interlace output
  OMAPDSS: add missing __init for dss_init_ports
  ARM: OMAP2+: remove pdata quirks for displays
  OMAPDSS: remove DT hacks for regulators
  Doc/DT: Add DT binding documentation for tpd12s015 encoder
  Doc/DT: Add DT binding documentation for TFP410 encoder
  Doc/DT: Add DT binding documentation for Sony acx565akm panel
  Doc/DT: Add DT binding documentation for MIPI DSI CM Panel
  Doc/DT: Add DT binding documentation for HDMI Connector
  Doc/DT: Add DT binding documentation for DVI Connector
  Doc/DT: Add DT binding documentation for Analog TV Connector
  ARM: omap3-n900.dts: add display information
  ARM: omap3-igep0020.dts: add display information
  ARM: omap3-beagle-xm.dts: add display information
  ARM: omap3-beagle.dts: add display information
  ARM: omap4-sdp.dts: add display information
  Doc/DT: Add DT binding documentation for OMAP DSS
  OMAPDSS: acx565akm: Add DT support
  OMAPDSS: connector-analog-tv: Add DT support
  OMAPDSS: hdmi-connector: Add DT support
  ...
2014-04-07 10:47:51 -07:00
Linus Torvalds
8e0c083234 fbdev changes for 3.15 (main part)
Various fbdev fixes and improvements, but nothing big.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJTPoIDAAoJEPo9qoy8lh71ScsQAI4sxk8ci/Al6uh3aOw90M+b
 Iy3MnBfjcItmtpmNUm8JJQ7ce5hfX2H8+uONu5iQCVLXZZyqDsIUtoJlZn2XCnEV
 3WFtHE12UwdiAiTYdinK6PH42A5G2U5RC2QMtPxAdm/QoKJgxI3ngsWJydFqWsRc
 wT7cFZ90ZybFc1+n5gcoXqoSfIm9ve/jTAVIzYCWRpqVUpsHbFGmK3t+MRaw4d6V
 AhJVYAwF5OJkB/QiKOiAmP1QytC7mKDtGy/GlQAZhrr924OK+/EVM1gUTdJEiE7x
 j1cZhQh5w/zisQE7N05ch5BTAZZRWMa5eUc/BbPal8sNwu3oK+WE5VOxClGLhCr/
 x3zq5Dzxr9r3xwonXILzUBqpGgmPuKPa0mAeknE0/tAgtqRvbLBttc1bp/sJj6/8
 6eNMEVg1SOg4387kR/kF4dRgeiLF9enrwNxVgm3rlJOXQQcpmqC7F4e9yiGdfqyr
 ZVzGYIvwErTLL/T/UBc6OTyGoG7Ifake1PEV8H0GWaF5uzIEZXoFJrEx7o9j9SR/
 H7qOcz7lm3YSmKB0tdgfBGMOnkOaWn+GMTW8N4M071PHyVEyJmz9uxLHQSiRRuMc
 Fwr1r2SyuxP1TmyIGT/Kyk2rApx/KP1TH/Z8MbFNL7J6VwgBzNrkIj1DbkngCODf
 VcbZiq04uICNKw8QsHtg
 =bavN
 -----END PGP SIGNATURE-----

Merge tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

Pull fbdev changes from Tomi Valkeinen:
 "Various fbdev fixes and improvements, but nothing big"

* tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (38 commits)
  fbdev: Make the switch from generic to native driver less alarming
  Video: atmel: avoid the id of fix screen info is overwritten
  video: imxfb: Add DT default contrast control register property.
  video: atmel_lcdfb: ensure the hardware is initialized with the correct mode
  fbdev: vesafb: add dev->remove() callback
  fbdev: efifb: add dev->remove() callback
  video: pxa3xx-gcu: switch to devres functions
  video: pxa3xx-gcu: provide an empty .open call
  video: pxa3xx-gcu: pass around struct device *
  video: pxa3xx-gcu: rename some symbols
  sisfb: fix 1280x720 resolution support
  video: fbdev: uvesafb: Remove impossible code path in uvesafb_init_info
  video: fbdev: uvesafb: Remove redundant NULL check in uvesafb_remove
  fbdev: FB_OPENCORES should depend on HAS_DMA
  OMAPDSS: convert pixel clock to common videomode style
  OMAPDSS: Remove unused get_context_loss_count support
  OMAPDSS: use DISPC register to detect context loss
  video: da8xx-fb: Use "SIMPLE_DEV_PM_OPS" macro
  video: imxfb: Convert to SIMPLE_DEV_PM_OPS
  video: imxfb: Resolve mismatch between backlight/contrast
  ...
2014-04-04 21:28:36 -07:00
Tomi Valkeinen
0f5d9d2e7d OMAPDSS: HDMI: fix interlace output
The HDMI output video format's yres needs to be divided by two for
interlace. Fix it.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-04 09:56:19 +03:00
Tomi Valkeinen
5f0bc7a9ee OMAPDSS: add missing __init for dss_init_ports
dss_init_ports() is missing __init, so fix that.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-04 09:55:18 +03:00
Tomi Valkeinen
931d4bd664 OMAPDSS: remove DT hacks for regulators
For booting Panda and 4430SDP with DT, while DSS did not support DT, we
had to had small hacks in the omapdss driver to get the regulators. With
DT now supported in DSS, we can remove those hacks.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2014-04-04 09:55:17 +03:00
Jingoo Han
3d8e4b401c backlight: tps65217_bl: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:11 -07:00
Jingoo Han
c6915be435 backlight: platform_lcd: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:11 -07:00
Jingoo Han
e1094f9f74 backlight: lms283gf05: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Marek Vasut <marex@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:11 -07:00
Jingoo Han
44d516f99b backlight: lm3533_bl: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Johan Hovold <jhovold@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:11 -07:00
Jingoo Han
1bd04820b9 backlight: l4f00242t03: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:11 -07:00
Jingoo Han
a82bdcfb3b backlight: ili9320: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:10 -07:00
Jingoo Han
619e1b491b backlight: ili922x: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:10 -07:00
Jingoo Han
aff70f9ab1 backlight: hx8357: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:10 -07:00
Jingoo Han
3b20b894d4 backlight: corgi_lcd: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:10 -07:00
Jingoo Han
0167a95698 backlight: adp8870: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:10 -07:00
Jingoo Han
ba464d0c88 backlight: adp8860: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:10 -07:00
Jingoo Han
78b35cf81e backlight: aat2870: remove unnecessary OOM messages
The site-specific OOM messages are unnecessary, because they duplicate
the MM subsystem generic OOM message.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Jinyoung Park <jinyoungp@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-03 16:21:09 -07:00