Commit Graph

31 Commits

Author SHA1 Message Date
Nicolas Ferre
f72d20fed9 ARM: dts: at91: sama5d2: move UART3 to DMA1
Now that DMA1 is defined, use it to distribute channel usage among the two
controllers.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10 15:42:33 +01:00
Nicolas Ferre
22eb6cc222 ARM: dts: at91: add dma1 definition to sama5d2
The sama5d2 SoC has a second DMA controller and can be used just like DMA0.
By default both DMA controllers are configured as "Secure" in
MATRIX_SPSELR so we can use whichever we want in a "single Secure World"
configuration.
Surprisingly the DMA1 has a lower address than DMA0. To avoid confusion
place it after DMA0 node anyway.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-01-10 15:42:33 +01:00
Alexandre Belloni
d4ce5f44d4 ARM: dts: at91: sama5d2: Add securam node
The sama5d2 has some static RAM that can be erased by the security module,
add its node

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-07 23:37:20 +01:00
Alexandre Belloni
d44432dfc4 ARM: dts: at91: sama5d2: Add secumod node
The sama5d2 has a security module, add its node.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-07 23:35:55 +01:00
Alexandre Belloni
58c016e09c ARM: dts: at91: sama5d2: use correct sckc compatible
the sama5d2 sckc is actually sama5d4 compatible

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-11-07 23:35:55 +01:00
Cyrille Pitchen
54475c8d78 ARM: dts: at91: sama5d2: enable FIFOs for high-speed i2c controllers
This patch enables the RX and TX FIFOs (16 data each) of the two
high-speed i2c controllers (i2c0 and i2c1).

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-10-20 16:40:36 +02:00
Olivier Schonken
e46f48ad86 ARM: dts: at91: sama5d2: add ETM and ETB nodes
Add node to support SAMA5D2 Embedded Trace Macrocell and Embedded
Trace Buffer.

This patch depends on coresight-etm3x: Add ARM ETM-A5 peripheral ID
for proper coresight functionality.
It also depends on clocksource: timer-atmel-pit: enable mck to not
stall SAMA5D2 on bootup.

Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-08-08 12:08:00 +02:00
Linus Torvalds
043248cd4e ARM: DT updates for v4.8
Device tree contents continue to be the largest branches we submit. This
 time around, some of the contents worth pointing out is:
 
 - New SoC platforms:
   - Freescale i.MX 7Solo
   - Broadcom BCM23550
   - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_
   - Hisilicon HI3519
   - Renesas R8A7792
 
 Some of the other delta that is sticking out, line-count wise:
  - Exynos moves of IP blocks under an SoC bus, which causes a large delta due
    to indentation changes
  - A new Tegra K1 board: Apalis
  - A bunch of small updates to many Allwinner platforms; new hardware support,
    some cleanup, etc.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXnnckAAoJEIwa5zzehBx3Ss0P/1hp+n8DMuNCHReof8u2D3xf
 pi9t5vNzfODMq/YrDT3bzQ3txoEZISt+ztEFku26BUywCZbeIEx+XLPewVEj0ODc
 tpWKmW2xNZDIwn2eHRrBD5Y8gJugAnwgwBh9SqfcM8Wtdt2qc7edBvcxLhsiCTuV
 pKPxPoJkan/BMR3vBMfoLIx/+aDcZJgpzUkRRuyLod17JdQ0tnMECu5UPrk6Yun8
 IjDcJTcwZlpZ9gvtBhxyGUENOPtmGH2ZvZuBPisr7Mwih4mDNJJ/9YrnsdfdYWaf
 WAysPGXYMfQy9jMiAC1cBm+jeIPvbIeZpYRzPt3vlFKAHpAZG1sp+r7SLfrT9e7x
 7La/QPNVLMsKTjGMW82/qRzOXBed3htk9v2YPIHQubFIOOz2mXqwSPXCqUHuYKeU
 eqzedvm0FGoeJbYTzpYyRAWU9OQtazOR+WAI8PrZiN4tdaxvYT2F5JJCMztYIoeq
 SJdPUbWTsYxkc/Kj1FagW0LOydO40Aif53JbfrabnzcRYlWsxqQfaSsP8J8G4QDq
 zXZvbt0IMan2B52X7AysDF8Zq4Ti8dVijvA7XNl7b5HFBrRpbOt9Tdhl/4zRiW14
 Y16VswnIR+9qPhtSXiSkdOwB/0cAI6XEiBTgRunYccakGDUfLOEpIVqJJ1zGNHpl
 hqJum3pAMW8i5JX8vl8J
 =C4NU
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "Device tree contents continue to be the largest branches we submit.
  This time around, some of the contents worth pointing out is:

  New SoC platforms:
   - Freescale i.MX 7Solo
   - Broadcom BCM23550
   - Cirrus Logic EP7209 and EP7211 (clps711x platforms)_
   - Hisilicon HI3519
   - Renesas R8A7792

  Some of the other delta that is sticking out, line-count wise:
   - Exynos moves of IP blocks under an SoC bus, which causes a large
     delta due to indentation changes
   - a new Tegra K1 board: Apalis
   - a bunch of small updates to many Allwinner platforms; new hardware
     support, some cleanup, etc"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (426 commits)
  ARM: dts: sun8i: Add dts file for inet86dz board
  ARM: dts: sun8i: Add dts file for Polaroid MID2407PXE03 tablet
  ARM: dts: sun8i: Use sun8i-reference-design-tablet for ga10h dts
  ARM: dts: sun8i: Use sun8i-reference-design-tablet for polaroid mid2809pxe04
  ARM: dts: sun8i: reference-design-tablet: Add drivevbus-supply
  ARM: dts: Copy sun8i-q8-common.dtsi sun8i-reference-design-tablet.dtsi
  ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for utoo p66 dts
  ARM: dts: sun5i: Use sun5i-reference-design-tablet.dtsi for dit4350 dts
  ARM: dts: sun5i: reference-design-tablet: Remove mention of q8
  ARM: dts: sun5i: reference-design-tablet: Set lradc vref to avcc
  ARM: dts: sun5i: Rename sun5i-q8-common.dtsi sun5i-reference-design-tablet.dtsi
  ARM: dts: sun5i: Move q8 display bits to sun5i-a13-q8-tablet.dts
  ARM: dts: sunxi: Rename sunxi-q8-common.dtsi sunxi-reference-design-tablet.dtsi
  ARM: dts: at91: Don't build unnecessary dtbs
  ARM: dts: at91: sama5d3x: separate motherboard gmac and emac definitions
  ARM: dts: at91: at91sam9g25ek: fix isi endpoint node
  ARM: dts: at91: move isi definition to at91sam9g25ek
  ARM: dts: at91: fix i2c-gpio node name
  ARM: dts: at91: vinco: fix regulator name
  ARM: dts: at91: ariag25 : fix onewire node
  ...
2016-08-01 18:37:45 -04:00
Alexandre Belloni
c32b5bcfa3 ARM: dts: at91: Fix USB endpoint nodes
Endpoint nodes have a reg property. Add their mandatory unit-address.

This solves:
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep0 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep1 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep2 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep3 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep4 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep5 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep6 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep7 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep8 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep9 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep10 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep11 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep12 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep13 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep14 has a reg or ranges property, but no unit name
Warning (unit_address_vs_reg): Node /ahb/gadget@00400000/ep15 has a reg or ranges property, but no unit name

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-15 10:23:31 +02:00
Olivier Schonken
fcac40c94d ARM: dts: at91: sama5d2: add PMU node
Add node to support SAMA5D2 Performance Monitor Unit.

Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-07-04 15:59:46 +02:00
Wenyou Yang
cab4328268 ARM: at91/dt: sama5d2: Use new compatible for ohci node
Use compatible "atmel,sama5d2-ohci" to be capable of suspending
ports while sleep to save the power consumption.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-07 22:19:59 -07:00
Linus Torvalds
f7df9be067 ARM: DT updates for v4.7
These are all the updates to device tree files for 32-bit platforms,
 which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
 changesets, 450 files changed, 23340 insertions, 5216 deletions.
 
 The three platforms that are added with the "soc" branch are here as well,
 and we add some related machine files:
 
 - For Aspeed AST2400/AST2500, we get the evaluation platform and
   the Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
 - For Oxnas 810SE, the Western Digital "My Book World Edition"
   is added as the only platform at the moment.
 - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7)
   are supported
 
 On the ARM Realview development platform, we now support all machines
 with device tree, previously only the board files were supported, which
 in turn will likely be removed soon.
 
 Qualcomm IPQ4019 is the second generation ARM based "Internet Processor",
 following the IPQ806x that is used in many high-end WiFi routers. This one
 integrates two ath10k wifi radios that were previously on separate chips.
 
 Other boards that got added for existing chips are:
 
 - On Ti OMAP family:
   - Amazon Kindle Fire, first generation, tablet and ebook reader
   - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
   - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
     development systems
 
 - On Samsung EXYNOS platform:
   - Samsung ARTIK5 evaluation board, see
     https://www.artik.io/modules/overview/artik-5/
 
 - On NXP i.MX platforms:
   - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
     TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
     SoM modules
   - Embest MarS Board i.MX6Dual DIY platform
   - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and
     SoloX Nitrogen6sx embedded boards
   - Technexion Pico i.MX6UL compute module
   - ZII VF610 Development Board
 
 - On Marvell embedded (mvebu, orion, kirkwood) platforms:
   - Linksys Viper (E4200v2 / EA4500) WiFi router
   - Buffalo Kurobox Pro NAS
 
 - On Qualcomm Snapdragon:
   - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600
 
 - On Rockchips platform:
   - mqmaker MiQi single-board computer
 
 - On Altera SoCFPGA:
   - samtec VIN|ING 1000 vehicle communication interface
 
 - On Allwinner Sunxi platforms:
   - Dserve DSRV9703C tablet
   - Difrnce DIT4350 tablet
   - Colorfly E708 Q1 tablet
   - Polaroid MID2809PXE04 tablet
   - Olimex A20 OLinuXino LIME2 single board computer
   - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC
     single board computers
 
 Across many platforms, bug fixes went in to address warnings that
 dtc now emits with 'make dtbs W=1'. Further changes for device enablement
 went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router),
 Ti Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
 NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
 rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
 Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
 Versatile Express.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAVzuXhGCrR//JCVInAQJXjhAA1bV0fbREflRQrlXdMb4rNesygH8ikaja
 gOYHE1yO+tSitHZ5g4w2yAFIEK7DzFdO5rz53BEINZfLCj4LO4495/z9ipqZQEjC
 rw5IL89jAn8x4wF791SHjLpmmNRbHN2vjLcsX3ShJIHckip/jIbiU2aFJuohA0TU
 jxpPAZzhaKsu/rDaVzHMS/im4LbZQ2qI3DxUUn6Kt8c468i4Ns22sowqSjh2xO/X
 YiwHD0eAvDrySfMGiNT82wMMTfMF2KfXZGB885isMP4hK8OIDrOnI5nM9rxyRFfu
 N14o0+tN1S2JzBHnqOOpib6JxYyCVr+QTjsKGAyR5X1mGINIhX8f1gy0EvFFxXKT
 rIATc5VTeo4gc1quij8RVtDEp/4iJ8GspH4WGMh1F8tjTe+WUxeSMkxdf6/QY1+Q
 vZKT0KKihoJQu1xI62NjnaRbfbhwx2BSWehwgXVd72lD19dG5LPw+Nj6/8+Bgouc
 YxJahgkB9MMtHoNp8huMg33Gr9a07/yVxc4CztXtf7N9phd0nEXov2iM1aBgazLU
 8IVd3Z9lZA+4iGVcj3oBJ6K1IkiCmg2qoNyF6tcInR5vPjKLECuxyuZw8VKuUuHD
 k/s/rymSGRlDN5i4F0h0r4MvQ9gkYfwk8xiL3ofmwYHwo103Q7b7Cw55XRk88EoB
 appd5QA+pko=
 =Nx46
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Arnd Bergmann:
 "These are all the updates to device tree files for 32-bit platforms,
  which as usual makes up the bulk of the ARM SoC changes: 462 non-merge
  changesets, 450 files changed, 23340 insertions, 5216 deletions.

  The three platforms that are added with the "soc" branch are here as
  well, and we add some related machine files:

   - For Aspeed AST2400/AST2500, we get the evaluation platform and the
     Tyan Palmetto POWER8 mainboard that uses the AST2400 BMC
   - For Oxnas 810SE, the Western Digital "My Book World Edition" is
     added as the only platform at the moment.
   - For ARM MPS2, the AN385 (Cortex-M3) and AN399 (Cortex-M7) are
     supported

  On the ARM Realview development platform, we now support all machines
  with device tree, previously only the board files were supported,
  which in turn will likely be removed soon.

  Qualcomm IPQ4019 is the second generation ARM based "Internet
  Processor", following the IPQ806x that is used in many high-end WiFi
  routers.  This one integrates two ath10k wifi radios that were
  previously on separate chips.

  Other boards that got added for existing chips are:

  Ti OMAP family:
     - Amazon Kindle Fire, first generation, tablet and ebook reader
     - OnRISC Baltos iR 2110 and 3220 embedded industrial PCs
     - TI AM5728 IDK, TI AM3359 ICE-V2, and TI DRA722 Rev C EVM
       development systems

  Samsung EXYNOS platform:
     - Samsung ARTIK5 evaluation board, see

        https://www.artik.io/modules/overview/artik-5/

  NXP i.MX platforms:
     - Ka-Ro electronics TX6S-8034, TX6S-8035, TX6U-8033, TX6U-81xx,
       TX6Q-1036, TX6Q-1110/-1130, TXUL-0010 and TXUL-0011 industrial
       SoM modules
     - Embest MarS Board i.MX6Dual DIY platform
     - Boundary Devices i.MX6 Quad Plus Nitrogen6_MAX and SoloX
       Nitrogen6sx embedded boards
     - Technexion Pico i.MX6UL compute module
     - ZII VF610 Development Board

  Marvell embedded (mvebu, orion, kirkwood) platforms:
     - Linksys Viper (E4200v2 / EA4500) WiFi router
     - Buffalo Kurobox Pro NAS

  Qualcomm Snapdragon:
     - Arrow DragonBoard 600c (96boards) with APQ8064 Snapdragon 600

  Rockchips platform:
     - mqmaker MiQi single-board computer

  Altera SoCFPGA:
     - samtec VIN|ING 1000 vehicle communication interface

  Allwinner Sunxi platforms:
     - Dserve DSRV9703C tablet
     - Difrnce DIT4350 tablet
     - Colorfly E708 Q1 tablet
     - Polaroid MID2809PXE04 tablet
     - Olimex A20 OLinuXino LIME2 single board computer
     - Xunlong Orange Pi 2, Orange Pi One, and Orange Pi PC single board
       computers

  Across many platforms, bug fixes went in to address warnings that dtc
  now emits with 'make dtbs W=1'.  Further changes for device enablement
  went into Ti OMAP, bcm283x (Raspberry Pi), bcm47xx (wifi router), Ti
  Davinci, Samsung EXYNOS, Marvell mvebu/kirkwood/orion, NXP i.MX/Vybrid
  NXP LPC18xx, NXP LPC32xx, Renesas shmobile/r-mobile/r-car, Rockchips
  rk3xxx, ST Ux500, ST STi, Atmel AT91/SAMA5, Altera SoCFPGA, Allwinner
  Sunxi, Sigma Designs Tango, NVIDIA Tegra, Socionext Uniphier and ARM
  Versatile Express"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (458 commits)
  ARM: dts: tango4: Import watchdog node
  ARM: dts: tango4: Update cpus node for cpufreq
  ARM: dts: tango4: Update DT to match clk driver
  ARM: dts: tango4: Initial thermal support
  arm/dst: Add Aspeed ast2500 device tree
  arm/dts: Add Aspeed ast2400 device tree
  ARM: sun7i: dt: Add pll3 and pll7 clocks
  ARM: dts: sunxi: Add a olinuxino-lime2-emmc
  ARM: dts: at91: sama5d4: add trng node
  ARM: dts: at91: sama5d3: add trng node
  ARM: dts: at91: sama5d2: add trng node
  ARM: dts: at91: at91sam9g45 family: reduce the trng register map size
  ARM: sun4i: dt: Add pll3 and pll7 clocks
  ARM: sun5i: chip: Enable the TV Encoder
  ARM: sun5i: r8: Add display blocks to the DTSI
  ARM: sun5i: a13: Add display and TCON clocks
  ARM: dts: ux500: configure the accelerometers open drain
  ARM: mx5: dts: Enable USB OTG on M53EVK
  ARM: dts: imx6ul-14x14-evk: Add audio support
  ARM: dts: imx6qdl: Remove unneeded unit-addresses
  ...
2016-05-18 12:48:46 -07:00
Wenyou Yang
b8453d4ee9 ARM: dts: at91: sama5d2: use "atmel,sama5d3-nfc" compatible for nfc
An error in documentation of the NAND Flash Controller (NFC) led to choose
another compatibility string for sama5d2 with an impact on the NAND flash
ready/busy information. It was producing the error message:

atmel_nand 80000000.nand: Time out to wait for interrupt: 0x08000000

and had an impact on performance.

So, switch back to the classical "atmel,sama5d3-nfc" compatibility string for
this SoC which gives the proper ready/busy bit information. The NAND flash
driver will be updated to remove the support for this different
implementation.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Romain Izard <romain.izard.pro@gmail.com>
[nicolas.ferre@atmel.com: change commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-10 09:09:47 +02:00
Mike Williams
02eb8d6827 ARM: dts: at91: sama5d2: add trng node
Add node to support SAMA5D2 hardware random number generator.

Signed-off-by: Mike Williams <mike@mikebwilliams.com>
[nicolas.ferre@atmel.com: reduce the register map size]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-05-06 15:35:28 +02:00
Nicolas Ferre
517550075c ARM: dts: at91: sama5d2: add slow clock to watchdog node
As the watchdog timer needs the slow clock, add it to the currently defined
wdt node.

Reported-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-04-27 14:08:58 +02:00
Nicolas Ferre
e4b9a21b25 ARM: dts: at91: sama5d2: add shutdown controller node
Add the SAMA5D2-Compatible Shutdown Controller node to sama5d2.dtsi
and the use of it in the sama5d2 Xplained board dts file.

Enable the RTC wakeup event and the "wake up" button support through the
input "0" that is present on the board.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-04-27 14:08:57 +02:00
Nicolas Ferre
fd718627b3 ARM: dts: at91: sama5d2: add LCD controller
Add LCD controller node that binds to the atmel_hlcdc DRM driver.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-29 16:32:33 +02:00
Ludovic Desroches
d77c23874f ARM: dts: at91: sama5d2: add chipid node
Add node for chipid device in order to have access to the CIDR and EXID
values.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-29 16:32:27 +02:00
Cyrille Pitchen
c8f26c2696 ARM: dts: at91: sama5d2: add SFR node
This SFR node is looked up by the I2S controller driver to tune the
SFR_I2SCLKSEL register.

Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-29 15:37:30 +02:00
Arnd Bergmann
9c8add4c4a Second 4.6 DT series, all patches for sama5d2 and its Xplained board:
- addition of the NAND flash node
 - addition of the dma properties for UART/USART nodes
 - one update of the sama5d2 Xplained phy node
 - addition of USB pinmux, button and leds
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQEcBAABAgAGBQJW1w1UAAoJEAf03oE53VmQmkAIALy7FfwfsXwV4EBMjrkyBbHF
 6fODom/DihCOaATD1tOaKaW0imyNXRu6qsnV5PZNRU7SCbJffolcY852iAW8I6hL
 qmdTumHGQszMJu95Nz+au04l9rqGvzeQ3v136YueMFtn6oQydF/6ttQzjjcCRKPy
 0FRTk6IKroKZ2qRl4dbvnMF1QJW+3eSe5U3mULEkTdc2Fup60cfwP9Z8uzzYIYgf
 CnMwyakQxqp/Y9tYTIMS/RKj+VuQxI0+nN6f8dWKsWbIKIEk6n8W+RtrKdYl1GZ2
 VT0GsCJ/qw+EHqk3dD45tFFIvdiXIc9UElB4p+s7CLqX4GAShN1JNkidkBrTgKw=
 =7QLe
 -----END PGP SIGNATURE-----

Merge tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt

Merge "at91: dt for 4.6 #2" from Nicolas Ferre:

Second 4.6 DT series, all patches for sama5d2 and its Xplained board:
- addition of the NAND flash node
- addition of the dma properties for UART/USART nodes
- one update of the sama5d2 Xplained phy node
- addition of USB pinmux, button and leds

* tag 'at91-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
  ARM: dts: at91: sama5d2 Xplained: add leds node
  ARM: dts: at91: sama5d2 Xplained: add user push button
  ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
  ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
  ARM: dts: at91: sama5d2: add dma properties to UART nodes
  ARM: dts: at91: sama5d2 Xplained: Correct the macb irq pinctrl node
2016-03-02 21:45:58 +01:00
Romain Izard
28fe80077e ARM: dts: at91: sama5d2: add nand0 and nfc0 nodes
Both nodes are required to access NAND Flash memory. Additional
settings will be necessary at the board level to use it.

Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-01 13:31:04 +01:00
Nicolas Ferre
b1708b72a0 ARM: dts: at91: sama5d2: add dma properties to UART nodes
The dmas/dma-names properties are added to the UART nodes. Note that additional
properties are needed to enable them at the board level: check bindings for
details.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2016-03-01 13:31:03 +01:00
Ludovic Desroches
aea14e1496 ARM: dts: at91: sama5d2: add adc device
Add the ADC device, and remove the adc_op_clk which is useless since the
adc sampling frequency is configured with sysfs.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2016-02-18 03:09:54 +01:00
Songjun Wu
70450d4d58 ARM: at91/dt: sama5d2: add pdmic node
Add pdmic node.

Signed-off-by: Songjun Wu <songjun.wu@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-12-22 10:37:30 +01:00
Wenyou Yang
92bd7aa413 ARM: at91/dt: sama5d2: add watchdog node
Add watchdog node to support SAMA5D4 watchdog.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-12-15 11:12:07 +01:00
Linus Torvalds
c0d6fe2f01 ARM: DT updates for v4.4
As usual, this is the massive branch we have for each release. Lots of
 various updates and additions of hardware descriptions on existing hardware,
 as well as the usual additions of new boards and SoCs.
 
 This is also the first release where we've started mixing 64- and 32-bit
 DT updates in one branch.
 
 (Specific details on what's actually here and new is pretty easy to tell
 from the diffstat, so there's little point in duplicating listing it here.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQT2WAAoJEIwa5zzehBx37tgQAIBe5eDJFXFihTlyOQ2plL3q
 vVH4OCzXIHELfM1J8CGZNah1wCQqNOts8RAmDCzxr+zSYuLOwJOEDZ6NKmErMxl0
 NTj3+BsqKO3NRym970ofPqU9JRLQmpZ8K7dzk8Nwj2+r1WZHFu/j6Jv44n/Ns0lw
 7+wxnG322lTm7SnvALCMD5lD4Y7VpThooWy5SdFtRoAetn+cLbVCJIeeQvO6Vxkp
 NooeJR0t2e8cpbAND5Jwu6eeWRcIbrvgjYDe0omhrIY05i9yNvIsC2HuQFGjF43z
 p2CnQvcKnhOXTZw3yse1Fx5igA7jqwVjjC/lVeDyxhusAtLpmuB6qbSaj7DpqkSQ
 nJxX1d49WKm68K+aknmee1kYRrvc4DE/kORI4IxXnsVNMu16ifTVLnxKgUhwzukb
 eZdTP6rsqgNozaYvh0k1vfSFd+CNSkBg+E9nrI3tU95yo3LOIhobVBCvBcWlmUvQ
 JdavRztqosChjIx3a9i1eCNKJtCg9p4m+gWjUqVVWsxBHe/3HojzjZnsBSynIQMA
 uGIVm0TKhNl1Svxl3oJo9257UCUK7+5PqJHK9IHrcWDULYx05JGSjuZcyvNS6Fo+
 u1DMf0ud4gXJYhecFBa7b3zRjk5YxptgCCTjeEEOTUJbbhZqDjGFZlNuFi6dmqD3
 ILJ2QMe/DGiPIlUmCfsx
 =qY1q
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM DT updates from Olof Johansson:
 "As usual, this is the massive branch we have for each release.  Lots
  of various updates and additions of hardware descriptions on existing
  hardware, as well as the usual additions of new boards and SoCs.

  This is also the first release where we've started mixing 64- and
  32-bit DT updates in one branch.

  (Specific details on what's actually here and new is pretty easy to
  tell from the diffstat, so there's little point in duplicating listing
  it here)"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (499 commits)
  ARM: dts: uniphier: add system-bus-controller nodes
  ARM64: juno: disable NOR flash node by default
  ARM: dts: uniphier: add outer cache controller nodes
  arm64: defconfig: Enable PCI generic host bridge by default
  arm64: Juno: Add support for the PCIe host bridge on Juno R1
  Documentation: of: Document the bindings used by Juno R1 PCIe host bridge
  ARM: dts: uniphier: add I2C aliases for ProXstream2 boards
  dts/Makefile: Add build support for LS2080a QDS & RDB board DTS
  dts/ls2080a: Add DTS support for LS2080a QDS & RDB boards
  dts/ls2080a: Update Simulator DTS to add support of various peripherals
  dts/ls2080a: Remove text about writing to Free Software Foundation
  dts/ls2080a: Update DTSI to add support of various peripherals
  doc: DTS: Update DWC3 binding to provide reference to generic bindings
  doc/bindings: Update GPIO devicetree binding documentation for LS2080A
  Documentation/dts: Move FSL board-specific bindings out of /powerpc
  Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards
  arm64: Rename FSL LS2085A SoC support code to LS2080A
  arm64: Use generic Layerscape SoC family naming
  ARM: dts: uniphier: add ProXstream2 Vodka board support
  ARM: dts: uniphier: add ProXstream2 Gentil board support
  ...
2015-11-10 15:06:26 -08:00
Ludovic Desroches
512fc048e4 ARM: at91/dt: sama5d2: add missing devices
Big update of the sama5d2.dtsi file since many patches have reached te
mainline:
- add generated clocks
- enable crypto devices
- add flexcom devices
- add tdes device
- add sdmmc devices

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-19 21:22:21 +02:00
Alexandre Belloni
620f503322 ARM: at91/dt: use syscon for PMC
The PMC is not only used to drive the clocks but also has some registers
related to other functions. One of those is for example the USB gadget
bias.
Using a syscon allows to properly separate those functions.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-10-19 17:57:41 +02:00
Ludovic Desroches
f6c804b08c ARM: at91/dt: sama5d2: add pio controller node
Add pio4 controller node to enable pinmux and gpio.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-21 11:24:28 -07:00
Alexandre Belloni
761c5867ef ARM: at91/dt: sama5d2: use slow clock where necessary
The watchdog, the reset controller, the RTC, the shutdown controller, the
timer counters and the LCD PWM need the slow clock, add it to the currently
defined nodes.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-08-07 17:33:54 +02:00
Ludovic Desroches
e30cf8d322 ARM: at91/dt: add basic dtsi for sama5d2 SoC
Only the basic support for this new Atmel Cortex-A5 SoC. A subset of the
peripherals is setup to allow booting.
IRQ, clocks, USB, crypto, timers, rtc, ethernet, spi/i2c and
uart/usart peripheral nodes are added.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-30 18:44:44 +02:00