commit 0e43884cca ("ARM: dts: dra71-evm: Select pull
down for mmc1_clk line in default mode") modified mmc1_pins_default
pinctrl group in dra71-evm.dts to change the CLK line to
PIN_INPUT_PULLDOWN. However instead of changing the pinctrl group,
use the new pinctrl group "mmc1_pins_default_no_clk_pu" in
dra7-mmc-iodelay.dtsi added specifically to be used for CLK line
without external pull up.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit 18aa0f4bca ("ARM: dts: am57xx-idk: Select pull down
for mmc1_clk line in default mode") modified mmc1_pins_default
pinctrl group in am57xx-idk-common.dtsi in order to change the CLK
line to PIN_INPUT_PULLDOWN. However instead of modifying the pinctrl
group, use the new pinctrl group "mmc1_pins_default_no_clk_pu" in
dra7-mmc-iodelay.dtsi added specifically to be used for CLK line without
external pull up.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
During a short period when the bus voltage is switched from 3.3v to 1.8v,
(to enumerate UHS mode), the mmc module is disabled and the mmc IO lines
are kept in a state according to the programmed pad mux pull type.
According to 4.2.4.2 Timing to Switch Signal Voltage in "SD Specifications
Part 1 Physical Layer Specification Version 5.00 February 22, 2016", the
host should hold CLK low for at least 5ms.
In order to keep the card line low during voltage switch, the pad mux of
mmc1_clk line should be configured to pull down.
Add a new pinctrl group for clock line without pullup to be used in boards
where mmc1_clk line is not connected to an external pullup.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add "vqmmc-supply" property for mmc2 to indicate the supply connected
to the IO lines.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
mmc specific pinmux is selected from dra72x-mmc-iodelay.dtsi, so remove
it from dra72-evm-common.dtsi.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
commit 8d20b2eae6 ("mmc: sdhci_omap: Add support to set
IODELAY values") stored IODelay values for all MM/SD modes
in pinctrl_state structure member of sdhci_omap_host. However for
DDR mode it gets IODelay values only for 1.8v DDR mode. Since some of
the platforms which uses sdhci-omap has IO lines connected to 3.3v,
get IODelay values for 3.3v DDR mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add pinctrl binding rquired to get the mux mode and IODelay
values from devicetree.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add sdhci_omap_enable_sdio_irq to set CTPL and CLKEXTFREE bits in
MMCHS_CON register required to detect asynchronous card interrupt
on DAT[1].
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the new compatible added specifically to support
k2g's MMC/SD controller.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add binding for the TI's sdhci-omap controller present in K2G.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Errata i834 in AM572x Sitara Processors Silicon Revision 2.0, 1.1
(SPRZ429K July 2014–Revised March 2017 [1]) mentions the maximum
obtainable timeout through MMC host controller is 700ms. And for
commands taking longer than 700ms, hardware timeout should be
disabled and software timeout should be used.
The workaround for Errata i834 can be achieved by adding
SDHCI_QUIRK2_DISABLE_HW_TIMEOUT quirk in sdhci-omap.
[1] -> http://www.ti.com/lit/er/sprz429k/sprz429k.pdf
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sdhci has a 10 second timeout to catch devices that stop responding.
In the case of quirk SDHCI_QUIRK2_DISABLE_HW_TIMEOUT, instead of
programming 10 second arbitrary value, calculate the total time it would
take for the entire transfer to happen and program the timeout value
accordingly.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Factor out the target_timeout calculation so it can be re-used.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add quirk to disable HW timeout if the requested timeout is more than the
maximum obtainable timeout.
Also, if the quirk is set and ->get_max_timeout_count() is not implemented,
max_busy_timeout is set to zero.
Based-on-patch-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The SDHCI controller in a SoC might support HS200/HS400 (indicated
using mmc-hs200-1_8v/mmc-hs400-1_8v dt property), but if the board is
modeled such that the IO lines are not connected to 1.8v then
HS200/HS400 cannot be supported. Disable HS200/HS400 if the board
does not have 1.8v connected to the IO lines. Also Disable DDR/UHS in 1.8v
if the IO lines are not connected to 1.8v.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Invoke sdhci_get_of_property defined in sdhci-pltfm.c to read
sdhci specific properties from dt node.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Errata i843 in AM572x Sitara Processors Silicon Revision 2.0, 1.1
(SPRZ429K July 2014–Revised March 2017 [1]) mentions
PG 1.0/1.1 silicon has limitations w.r.t frequencies at which MMC1/2/3
can operate.
Use soc_device_match() to identify rev 1.0/1.1 silicon and
override mmc->f_max according to the errata workaround.
"max-frequency" dt property cannot be used since the device
tree is added for rev 2.0 silicon.
soc_device_match() is also used in order to get the IODelay values
for rev 1.0/1.1 silicon.
[1] -> http://www.ti.com/lit/er/sprz429k/sprz429k.pdf
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sdhci can directly get ADMA capability from MMCHS_CAPA register.
Remove explicitly setting ADMA here as some instances might not have
ADMA enabled. (sdhci_read_caps() is also removed from here since
sdhci_setup_host() invokes it).
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sdhci_omap_config_iodelay_pinctrl_state() requires caps and caps2 to be
initialized (speed mode capabilities like UHS/HS200) before it is
invoked. While mmc_of_parse() initializes caps/caps2 if capabilities is
populated in device tree, it will remain uninitialized for capabilities
obtained from SDHCI_CAPABILITIES register.
Fix sdhci_omap_config_iodelay_pinctrl_state() to be used even while
getting the capabilities from SDHCI_CAPABILITIES register by invoking
sdhci_setup_host() before sdhci_omap_config_iodelay_pinctrl_state().
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull x86 fixes from Thomas Gleixner:
"Another set of x86 related updates:
- Fix the long broken x32 version of the IPC user space headers which
was noticed by Arnd Bergman in course of his ongoing y2038 work.
GLIBC seems to have non broken private copies of these headers so
this went unnoticed.
- Two microcode fixlets which address some more fallout from the
recent modifications in that area:
- Unconditionally save the microcode patch, which was only saved
when CPU_HOTPLUG was enabled causing failures in the late
loading mechanism
- Make the later loader synchronization finally work under all
circumstances. It was exiting early and causing timeout failures
due to a missing synchronization point.
- Do not use mwait_play_dead() on AMD systems to prevent excessive
power consumption as the CPU cannot go into deep power states from
there.
- Address an annoying sparse warning due to lost type qualifiers of
the vmemmap and vmalloc base address constants.
- Prevent reserving crash kernel region on Xen PV as this leads to
the wrong perception that crash kernels actually work there which
is not the case. Xen PV has its own crash mechanism handled by the
hypervisor.
- Add missing TLB cpuid values to the table to make the printout on
certain machines correct.
- Enumerate the new CLDEMOTE instruction
- Fix an incorrect SPDX identifier
- Remove stale macros"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
x86/setup: Do not reserve a crash kernel region if booted on Xen PV
x86/cpu/intel: Add missing TLB cpuid values
x86/smpboot: Don't use mwait_play_dead() on AMD systems
x86/mm: Make vmemmap and vmalloc base address constants unsigned long
x86/vector: Remove the unused macro FPU_IRQ
x86/vector: Remove the macro VECTOR_OFFSET_START
x86/cpufeatures: Enumerate cldemote instruction
x86/microcode: Do not exit early from __reload_late()
x86/microcode/intel: Save microcode patch unconditionally
x86/jailhouse: Fix incorrect SPDX identifier
Pull x86 pti fixes from Thomas Gleixner:
"A set of updates for the x86/pti related code:
- Preserve r8-r11 in int $0x80. r8-r11 need to be preserved, but the
int$80 entry code removed that quite some time ago. Make it correct
again.
- A set of fixes for the Global Bit work which went into 4.17 and
caused a bunch of interesting regressions:
- Triggering a BUG in the page attribute code due to a missing
check for early boot stage
- Warnings in the page attribute code about holes in the kernel
text mapping which are caused by the freeing of the init code.
Handle such holes gracefully.
- Reduce the amount of kernel memory which is set global to the
actual text and do not incidentally overlap with data.
- Disable the global bit when RANDSTRUCT is enabled as it
partially defeats the hardening.
- Make the page protection setup correct for vma->page_prot
population again. The adjustment of the protections fell through
the crack during the Global bit rework and triggers warnings on
machines which do not support certain features, e.g. NX"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64/compat: Preserve r8-r11 in int $0x80
x86/pti: Filter at vma->vm_page_prot population
x86/pti: Disallow global kernel text with RANDSTRUCT
x86/pti: Reduce amount of kernel text allowed to be Global
x86/pti: Fix boot warning from Global-bit setting
x86/pti: Fix boot problems from Global-bit setting
Pull timer fixes from Thomas Gleixner:
"Two fixes from the timer departement:
- Fix a long standing issue in the NOHZ tick code which causes RB
tree corruption, delayed timers and other malfunctions. The cause
for this is code which modifies the expiry time of an enqueued
hrtimer.
- Revert the CLOCK_MONOTONIC/CLOCK_BOOTTIME unification due to
regression reports. Seems userspace _is_ relying on the documented
behaviour despite our hope that it wont"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert: Unify CLOCK_MONOTONIC and CLOCK_BOOTTIME
tick/sched: Do not mess with an enqueued hrtimer
Pull perf fixes from Thomas Gleixner:
"The perf update contains the following bits:
x86:
- Prevent setting freeze_on_smi on PerfMon V1 CPUs to avoid #GP
perf stat:
- Keep the '/' event modifier separator in fallback, for example when
fallbacking from 'cpu/cpu-cycles/' to user level only, where it
should become 'cpu/cpu-cycles/u' and not 'cpu/cpu-cycles/:u' (Jiri
Olsa)
- Fix PMU events parsing rule, improving error reporting for invalid
events (Jiri Olsa)
- Disable write_backward and other event attributes for !group events
in a group, fixing, for instance this group: '{cycles,msr/aperf/}:S'
that has leader sampling (:S) and where just the 'cycles', the
leader event, should have the write_backward attribute set, in this
case it all fails because the PMU where 'msr/aperf/' lives doesn't
accepts write_backward style sampling (Jiri Olsa)
- Only fall back group read for leader (Kan Liang)
- Fix core PMU alias list for x86 platform (Kan Liang)
- Print out hint for mixed PMU group error (Kan Liang)
- Fix duplicate PMU name for interval print (Kan Liang)
Core:
- Set main kernel end address properly when reading kernel and module
maps (Namhyung Kim)
perf mem:
- Fix incorrect entries and add missing man options (Sangwon Hong)
s/390:
- Remove s390 specific strcmp_cpuid_cmp function (Thomas Richter)
- Adapt 'perf test' case record+probe_libc_inet_pton.sh for s390
- Fix s390 undefined record__auxtrace_init() return value in 'perf
record' (Thomas Richter)"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Don't enable freeze-on-smi for PerfMon V1
perf stat: Fix duplicate PMU name for interval print
perf evsel: Only fall back group read for leader
perf stat: Print out hint for mixed PMU group error
perf pmu: Fix core PMU alias list for X86 platform
perf record: Fix s390 undefined record__auxtrace_init() return value
perf mem: Document incorrect and missing options
perf evsel: Disable write_backward for leader sampling group events
perf pmu: Fix pmu events parsing rule
perf stat: Keep the / modifier separator in fallback
perf test: Adapt test case record+probe_libc_inet_pton.sh for s390
perf list: Remove s390 specific strcmp_cpuid_cmp function
perf machine: Set main kernel end address properly
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlrlM9IACgkQ8vlZVpUN
gaOtrQf+OhNwH0vIfCQwQG36m7DM5DNJ1eiFV6Qp++7B+nzMO7nRaXrINTKty/iO
vSK59a2lCa1Uufjii/vIiVoVjiaiRfVJJt4/WFV6jtESxnBAPTj//nFDGBoQANsR
XxTNDO9Bkra9QlWgasSiqbkyyKd2KFHf23LP1fdfspXuRFrGhu6pYqaZpbx8V0/2
j+TeLS9V8vNx/rWNmvpMK+WopapvrGYoA0YESAZJBCLMNO5uZZ+2qteORPp+Y5oQ
0d0mCLPedYy5gagHUIN4EnpwP4zNh8efQhQA16teEqs+foIHnyp7VnYYG1lJ3z+Y
bYQoQGmKKdnd6Hl+/5sLYct8yZEhXQ==
=EF3H
-----END PGP SIGNATURE-----
Merge tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix misc bugs and a regression for ext4"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add MODULE_SOFTDEP to ensure crc32c is included in the initramfs
ext4: fix bitmap position validation
ext4: set h_journal if there is a failure starting a reserved handle
ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS
The comment claims that this helper will try not to loose bits, but for
64bit long it looses the high bits before hashing 64bit long into 32bit
int. Use the helper hash_long() to do the right thing for 64bit long.
For 32bit long, there is no change.
All the callers of end_name_hash() either assign the result to
qstr->hash, which is u32 or return the result as an int value (e.g.
full_name_hash()). Change the helper return type to int to conform to
its users.
[ It took me a while to apply this, because my initial reaction to it
was - incorrectly - that it could make for slower code.
After having looked more at it, I take back all my complaints about
the patch, Amir was right and I was mis-reading things or just being
stupid.
I also don't worry too much about the possible performance impact of
this on 64-bit, since most architectures that actually care about
performance end up not using this very much (the dcache code is the
most performance-critical, but the word-at-a-time case uses its own
hashing anyway).
So this ends up being mostly used for filesystems that do their own
degraded hashing (usually because they want a case-insensitive
comparison function).
A _tiny_ worry remains, in that not everybody uses DCACHE_WORD_ACCESS,
and then this potentially makes things more expensive on 64-bit
architectures with slow or lacking multipliers even for the normal
case.
That said, realistically the only such architecture I can think of is
PA-RISC. Nobody really cares about performance on that, it's more of a
"look ma, I've got warts^W an odd machine" platform.
So the patch is fine, and all my initial worries were just misplaced
from not looking at this properly. - Linus ]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The AFFS filesystem is still in use by m68k community (Link #2), but as
there was no code activity and no maintainer, the filesystem appeared on
the list of candidates for staging/removal (Link #1).
I volunteer to act as a maintainer of AFFS to collect any fixes that
might show up and to guard fs/affs/ against another spring cleaning.
Link: https://lkml.kernel.org/r/20180425154602.GA8546@bombadil.infradead.org
Link: https://lkml.kernel.org/r/1613268.lKBQxPXt8J@merkaba
CC: Martin Steigerwald <martin@lichtvoll.de>
CC: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c fixes from Wolfram Sang:
- two driver fixes
- better parameter check for the core
- Documentation updates
- part of a tree-wide HAS_DMA cleanup
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sprd: Fix the i2c count issue
i2c: sprd: Prevent i2c accesses after suspend is called
i2c: dev: prevent ZERO_SIZE_PTR deref in i2cdev_ioctl_rdwr()
Documentation/i2c: adopt kernel commenting style in examples
Documentation/i2c: sync docs with current state of i2c-tools
Documentation/i2c: whitespace cleanup
i2c: Remove depends on HAS_DMA in case of platform dependency
Pull crypto fixes from Herbert Xu:
- crypto API regression that may cause sporadic alloc failures
- double-free bug in drbg
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: drbg - set freed buffers to NULL
crypto: api - fix finding algorithm currently being tested
-----BEGIN PGP SIGNATURE-----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=U4ba
-----END PGP SIGNATURE-----
Merge tag '4.17-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"A few security related fixes for SMB3, most importantly for SMB3.11
encryption"
* tag '4.17-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6:
cifs: smbd: Avoid allocating iov on the stack
cifs: smbd: Don't use RDMA read/write when signing is used
SMB311: Fix reconnect
SMB3: Fix 3.11 encryption to Windows and handle encrypted smb3 tcon
CIFS: set *resp_buf_type to NO_BUFFER on error
A bunch of fixes, mostly for existing code and going to stable.
Our memory hot-unplug path wasn't flushing the cache before removing memory.
That is a problem now that we are doing memory hotplug on bare metal.
Three fixes for the NPU code that supports devices connected via NVLink (ie.
GPUs). The main one tweaks the TLB flush algorithm to avoid soft lockups for
large flushes.
A fix for our memory error handling where we would loop infinitely, returning
back to the bad access and hard lockup the CPU.
Fixes for the OPAL RTC driver, which wasn't handling some error cases correctly.
A fix for a hardlockup in the powernv cpufreq driver.
And finally two fixes to our smp_send_stop(), required due to a recent change to
use it on shutdown.
Thanks to:
Alistair Popple, Balbir Singh, Laurentiu Tudor, Mahesh Salgaonkar, Mark
Hairgrove, Nicholas Piggin, Rashmica Gupta, Shilpasri G Bhat.
-----BEGIN PGP SIGNATURE-----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=JJLB
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A bunch of fixes, mostly for existing code and going to stable.
Our memory hot-unplug path wasn't flushing the cache before removing
memory. That is a problem now that we are doing memory hotplug on bare
metal.
Three fixes for the NPU code that supports devices connected via
NVLink (ie. GPUs). The main one tweaks the TLB flush algorithm to
avoid soft lockups for large flushes.
A fix for our memory error handling where we would loop infinitely,
returning back to the bad access and hard lockup the CPU.
Fixes for the OPAL RTC driver, which wasn't handling some error cases
correctly.
A fix for a hardlockup in the powernv cpufreq driver.
And finally two fixes to our smp_send_stop(), required due to a recent
change to use it on shutdown.
Thanks to: Alistair Popple, Balbir Singh, Laurentiu Tudor, Mahesh
Salgaonkar, Mark Hairgrove, Nicholas Piggin, Rashmica Gupta, Shilpasri
G Bhat"
* tag 'powerpc-4.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kvm/booke: Fix altivec related build break
powerpc: Fix deadlock with multiple calls to smp_send_stop
cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt
powerpc: Fix smp_send_stop NMI IPI handling
rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops
powerpc/mce: Fix a bug where mce loops on memory UE.
powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large address range
powerpc/powernv/npu: Prevent overwriting of pnv_npu2_init_contex() callback parameters
powerpc/powernv/npu: Add lock to prevent race in concurrent context init/destroy
powerpc/powernv/memtrace: Let the arch hotunplug code flush cache
powerpc/mm: Flush cache on memory hot(un)plug
ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT
-----BEGIN PGP SIGNATURE-----
iQEcBAABCAAGBQJa44lQAAoJEED/6hsPKofo1dIH/3n9AZSWvavgL2V3j6agT8Yy
hxF4nHCFEJd5aqDNwbG9QEzivKw88r3o3mdB2XAQESB2MlCYR1jkTONm7yvVJTs/
/P9gj+DEQbCj2AgT//u3BGsAsZDKFhB9JwfmV2Mp4zDIqWFa6oCOGeq/iPVAGDcN
vUpuYeIicuH9SRoxH7de3z+BEXW0O+gCABXQtvA93FKTMz35yFTgmbDVCnvaV0zL
3B+3/4/jdbTRICW8EX6Li43+gEBUMtnVNkdqxLPTuCtDG8iuPUGfgF02gH99/9gj
hliV3Q4VUZKkSABW5AqKPe4+9rbsHCh9eL0LpHFGI9y+6LeUIOXAX4CtohR8gWE=
=W9Vz
-----END PGP SIGNATURE-----
rMerge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- PSCI selection API, a leftover from 4.16 (for stable)
- Kick vcpu on active interrupt affinity change
- Plug a VMID allocation race on oversubscribed systems
- Silence debug messages
- Update Christoffer's email address (linaro -> arm)
x86:
- Expose userspace-relevant bits of a newly added feature
- Fix TLB flushing on VMX with VPID, but without EPT"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/headers/UAPI: Move DISABLE_EXITS KVM capability bits to the UAPI
kvm: apic: Flush TLB after APIC mode/address change if VPIDs are in use
arm/arm64: KVM: Add PSCI version selection API
KVM: arm/arm64: vgic: Kick new VCPU on interrupt migration
arm64: KVM: Demote SVE and LORegion warnings to debug only
MAINTAINERS: Update e-mail address for Christoffer Dall
KVM: arm/arm64: Close VMID generation race
- Close some potential spectre-v1 vulnerabilities found by smatch
- Add missing list sentinel for CPUs that don't require KPTI
- Removal of unused 'addr' parameter for I/D cache coherency
- Removal of redundant set_fs(KERNEL_DS) calls in ptrace
- Fix single-stepping state machine handling in response to kernel traps
- Clang support for 128-bit integers
- Avoid instrumenting our out-of-line atomics in preparation for enabling
LSE atomics by default in 4.18
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABCgAGBQJa4w6JAAoJELescNyEwWM0P2IIAMLITiYvB+LEwWH6VZ5zl+D0
F1qoQPon6M68fSc86rNNwoOrLzisHPTMMyR3re5+rHe67EwHCMtupkNk3s/+/vi3
PVq3W2Rjw9GTFL/7sDNmaHvJLQ3lG1HAh4uO2WneLbLV6wkbw7/JlmCcwlS48zB0
zxY5fKnZNPCAfAT34TYZGMHINy5rOoo7+H3+/ZB/f4jc3FIatfnsUb3+Mr5B/lZ9
HoOddh9PEt+CY2v5Yr2M6FJuu/oaZdX+KaAUlynd44jyF+XgB5BxXTEHoD4bEO9l
q8CzjqzUqqBn8qSF36r/gdffH4eAKkrFgMCxjdEbPX1cOj67fTquNALBmAhAA7M=
=CIk+
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Nothing too bad, but the spectre updates to smatch identified a few
places that may need sanitising so we've got those covered.
Details:
- Close some potential spectre-v1 vulnerabilities found by smatch
- Add missing list sentinel for CPUs that don't require KPTI
- Removal of unused 'addr' parameter for I/D cache coherency
- Removal of redundant set_fs(KERNEL_DS) calls in ptrace
- Fix single-stepping state machine handling in response to kernel
traps
- Clang support for 128-bit integers
- Avoid instrumenting our out-of-line atomics in preparation for
enabling LSE atomics by default in 4.18"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: avoid instrumenting atomic_ll_sc.o
KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_mmio_read_apr()
KVM: arm/arm64: vgic: fix possible spectre-v1 in vgic_get_irq()
arm64: fix possible spectre-v1 in ptrace_hbp_get_event()
arm64: support __int128 with clang
arm64: only advance singlestep for user instruction traps
arm64/kernel: rename module_emit_adrp_veneer->module_emit_veneer_for_adrp
arm64: ptrace: remove addr_limit manipulation
arm64: mm: drop addr parameter from sync icache and dcache
arm64: add sentinel to kpti_safe_list
- Fix display of module section addresses in sysfs, which were getting
hashed with %pK and breaking tools like perf.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ZGdS
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules fix from Jessica Yu:
"Fix display of module section addresses in sysfs, which were getting
hashed with %pK and breaking tools like perf"
* tag 'modules-for-v4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: Fix display of wrong module .text address
messenger layer, marked for stable.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJa4y7RAAoJEEp/3jgCEfOLaOAH/jLawBpY9He0fwyRoDctOZAb
KwZyFfCl7XnThJiejMt864cJ0vjU6iufE+3kxFqUWEhOH4nhXYWNdNJ3Tgn1satY
uwG5PJGYy+El0xL6C7IYeasy+y8wbtvYdjRqYEAnEzTH2xQ99GsN1QPMjySAacvQ
ONz/11Mdj6C8bLfIsth4jcCkkC9TqlWYmyCds4GADN+a/Nw6vwT+ew88kgVDhBcD
JUjFsBpxe+WtR7rKUhldd+lwngiJ3D4YCKLogJgaYAwVBJoK3lbdldd9FH9/JGyf
67Y2j/oOTPWCWnZuXtUw7dEvTCuW5QSMQJyXB1+vndsN1Y3mfWwlVMw1wREtQXs=
=BShN
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.17-rc3' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A CephFS quota follow-up and fixes for two older issues in the
messenger layer, marked for stable"
* tag 'ceph-for-4.17-rc3' of git://github.com/ceph/ceph-client:
libceph: validate con->state at the top of try_write()
libceph: reschedule a tick in finish_hunting()
libceph: un-backoff on tick when we have a authenticated session
ceph: check if mds create snaprealm when setting quota
Here are some small char and misc driver fixes for 4.17-rc3
A variety of small things that have fallen out after 4.17-rc1 was out.
Some vboxguest fixes for systems with lots of memory, amba bus fixes,
some MAINTAINERS updates, uio_hv_generic driver fixes, and a few other
minor things that resolve problems that people reported.
The amba bus fixes took twice to get right, the first time I messed up
applying the patches in the wrong order, hence the revert and later
addition again with the correct fix, sorry about that.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMvtA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynNswCfcg2lXYFZzS1OcMYX4TEyo/cWbHQAniYIU6st
dP0MG/whdUu7q6r6otVc
=l/Bn
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 4.17-rc3
A variety of small things that have fallen out after 4.17-rc1 was out.
Some vboxguest fixes for systems with lots of memory, amba bus fixes,
some MAINTAINERS updates, uio_hv_generic driver fixes, and a few other
minor things that resolve problems that people reported.
The amba bus fixes took twice to get right, the first time I messed up
applying the patches in the wrong order, hence the revert and later
addition again with the correct fix, sorry about that.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
ARM: amba: Fix race condition with driver_override
ARM: amba: Make driver_override output consistent with other buses
Revert "ARM: amba: Fix race condition with driver_override"
ARM: amba: Don't read past the end of sysfs "driver_override" buffer
ARM: amba: Fix race condition with driver_override
virt: vbox: Log an error when we fail to get the host version
virt: vbox: Use __get_free_pages instead of kmalloc for DMA32 memory
virt: vbox: Add vbg_req_free() helper function
virt: vbox: Move declarations of vboxguest private functions to private header
slimbus: Fix out-of-bounds access in slim_slicesize()
MAINTAINERS: add dri-devel&linaro-mm for Android ION
fpga-manager: altera-ps-spi: preserve nCONFIG state
MAINTAINERS: update my email address
uio_hv_generic: fix subchannel ring mmap
uio_hv_generic: use correct channel in isr
uio_hv_generic: make ring buffer attribute for primary channel
uio_hv_generic: set size of ring buffer attribute
ANDROID: binder: prevent transactions into own process.
Here are some small driver core and firmware fixes for 4.17-rc3
There's a kobject WARN() removal to make syzkaller a lot happier about
some "normal" error paths that it keeps hitting, which should reduce the
number of false-positives we have been getting recently.
There's also some fimware test and documentation fixes, and the
coredump() function signature change that needed to happen after -rc1
before drivers started to take advantage of it.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMxrw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFpQCg1JM62/W8e6mQ4vdZNQmAzgMKMEMAniOMcVRX
/oDWXp64mYwJu+GTxnIJ
=+9Gk
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg Kroah-Hartman:
"Here are some small driver core and firmware fixes for 4.17-rc3
There's a kobject WARN() removal to make syzkaller a lot happier about
some "normal" error paths that it keeps hitting, which should reduce
the number of false-positives we have been getting recently.
There's also some fimware test and documentation fixes, and the
coredump() function signature change that needed to happen after -rc1
before drivers started to take advantage of it.
All of these have been in linux-next with no reported issues"
* tag 'driver-core-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: some documentation fixes
selftests:firmware: fixes a call to a wrong function name
kobject: don't use WARN for registration failures
firmware: Fix firmware documentation for recent file renames
test_firmware: fix setting old custom fw path back on exit, second try
test_firmware: Install all scripts
drivers: change struct device_driver::coredump() return type to void
Here are some tty and serial driver fixes for reported issues for
4.17-rc3.
Nothing major, but a number of small things:
- device tree fixes/updates for serial ports
- earlycon fixes
- n_gsm fixes
- tty core change reverted to help resolve syszkaller reports
- other serial driver small fixes
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuM0Vg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksXgCgqT2E9Ah5O/uZp3yGAjRILKjX294AoI46+t3W
Xy8WA1Fw1NCMBvfvCVIv
=gBd0
-----END PGP SIGNATURE-----
Merge tag 'tty-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty and serial driver fixes for reported issues for
4.17-rc3.
Nothing major, but a number of small things:
- device tree fixes/updates for serial ports
- earlycon fixes
- n_gsm fixes
- tty core change reverted to help resolve syszkaller reports
- other serial driver small fixes
All of these have been in linux-next with no reported issues"
* tag 'tty-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Use __GFP_NOFAIL for tty_ldisc_get()
tty: serial: xuartps: Setup early console when uartclk is also passed
tty: Don't call panic() at tty_ldisc_init()
tty: Avoid possible error pointer dereference at tty_ldisc_restore().
dt-bindings: mvebu-uart: DT fix s/interrupts-names/interrupt-names/
tty: serial: qcom_geni_serial: Use signed variable to get IRQ
earlycon: Use a pointer table to fix __earlycon_table stride
serial: sh-sci: Document r8a77470 bindings
dt-bindings: meson-uart: DT fix s/clocks-names/clock-names/
serial: imx: fix cached UCR2 read on software reset
serial: imx: warn user when using unsupported configuration
serial: mvebu-uart: Fix local flags handling on termios update
tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
Move DISABLE_EXITS KVM capability bits to the UAPI just like the rest of
capabilities.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Here are 2 staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that you
pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuMyew8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymXxACffYtMbj0Vg5pD0yAPqRzJ2iVMVE0AnRkp4BYQ
kXgAjDeSyrdKPUwQ7Hl2
=UNuF
-----END PGP SIGNATURE-----
Merge tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two staging driver fixups for 4.17-rc3.
The first is the remaining stragglers of the irda code removal that
you pointed out during the merge window. The second is a fix for the
wilc1000 driver due to a patch that got merged in 4.17-rc1.
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: wilc1000: fix NULL pointer exception in host_int_parse_assoc_resp_info()
staging: irda: remove remaining remants of irda code removal
Here are a number of USB driver fixes for reported problems for
4.17-rc3.
The "largest" here is a number of phy core changes for reported problems
with the -rc1 release. There's also the usual musb and xhci fixes, as
well as new device id updates. There are also some usbip fixes for
reported problems as more people start to use that code with containers.
All of these have been in linux-next with no reported issues, except the
last few new device ids, which are "obviously correct" :)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWuM0+g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynJ0QCfShhVDAuE1neAmu4vF9HFY8eoe3UAn1b71qRn
UJ5VIrtn1cS0bB3tPwmu
=sdc6
-----END PGP SIGNATURE-----
Merge tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of USB driver fixes for reported problems for
4.17-rc3.
The "largest" here is a number of phy core changes for reported
problems with the -rc1 release. There's also the usual musb and xhci
fixes, as well as new device id updates. There are also some usbip
fixes for reported problems as more people start to use that code with
containers.
All of these have been in linux-next with no reported issues, except
the last few new device ids, which are "obviously correct" :)"
* tag 'usb-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: musb: dsps: drop duplicate phy initialisation
USB: musb: host: prevent core phy initialisation
usb: core: phy: add the SPDX-License-Identifier and include guard
xhci: Fix Kernel oops in xhci dbgtty
usb: select USB_COMMON for usb role switch config
usb: core: phy: add missing forward declaration for "struct device"
usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled
usb: core: use phy_exit during suspend if wake up is not supported
usb: core: split usb_phy_roothub_{init,alloc}
usb: core: phy: fix return value of usb_phy_roothub_exit()
usb: typec: ucsi: Increase command completion timeout value
Revert "xhci: plat: Register shutdown for xhci_plat"
usb: core: Add quirk for HP v222w 16GB Mini
Documentation: typec.rst: Use literal-block element with ascii art
usb: typec: ucsi: fix tracepoint related build error
usbip: usbip_event: fix to not print kernel pointer address
usbip: usbip_host: fix to hold parent lock for device_attach() calls
usbip: vhci_hcd: Fix usb device and sockfd leaks
usbip: vhci_hcd: check rhport before using in vhci_hub_control()
USB: Increment wakeup count on remote wakeup.
...
A significant amount of fixes have been piled up at this time.
- Possible Spectre v1 coverage in OSS sequencer API, control API,
HD-audio hwdep ioctl, ASIHPI hwdep ioctl, OPL3, and HDSPM/RME
channel_info API.
- A regression fix in PCM delay reporting that happened at the code
refactoring for the set_fs() removal
- The long-standing bug in PCM sync_ptr ioctl that missed the audio
timestamp field
- USB-audio regression fixes due to the recent UAC2 jack support
- vm_fault_t conversions in a couple of places
- ASoC topology API fixes
- Assorted driver fixes:
* ASoC rsnd, FSL, Intel SST, DMIC, AMD, ADAU17x1, Realtek codec
* FireWire typo fix
* HD-audio quirks and USB-audio Dell fixup
* USB-audio UAC3 corrections
-----BEGIN PGP SIGNATURE-----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=eSik
-----END PGP SIGNATURE-----
Merge tag 'sound-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A significant amount of fixes have been piled up at this time.
- Possible Spectre v1 coverage in OSS sequencer API, control API,
HD-audio hwdep ioctl, ASIHPI hwdep ioctl, OPL3, and HDSPM/RME
channel_info API.
- A regression fix in PCM delay reporting that happened at the code
refactoring for the set_fs() removal
- The long-standing bug in PCM sync_ptr ioctl that missed the audio
timestamp field
- USB-audio regression fixes due to the recent UAC2 jack support
- vm_fault_t conversions in a couple of places
- ASoC topology API fixes
- Assorted driver fixes:
* ASoC rsnd, FSL, Intel SST, DMIC, AMD, ADAU17x1, Realtek codec
* FireWire typo fix
* HD-audio quirks and USB-audio Dell fixup
* USB-audio UAC3 corrections"
* tag 'sound-4.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (35 commits)
ALSA: dice: fix error path to destroy initialized stream data
ALSA: hda - Skip jack and others for non-existing PCM streams
ALSA: hda/realtek - change the location for one of two front mics
ALSA: rme9652: Hardening for potential Spectre v1
ALSA: hdspm: Hardening for potential Spectre v1
ALSA: asihpi: Hardening for potential Spectre v1
ALSA: opl3: Hardening for potential Spectre v1
ALSA: hda: Hardening for potential Spectre v1
ALSA: control: Hardening for potential Spectre v1
ALSA: seq: oss: Hardening for potential Spectre v1
ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device
ALSA: hda/realtek - Update ALC255 depop optimize
ALSA: hda/realtek - Add some fixes for ALC233
ALSA: pcm: Change return type to vm_fault_t
ALSA: usx2y: Change return type to vm_fault_t
ALSA: usb-audio: ADC3: Fix channel mapping conversion for ADC3.
ALSA: dice: fix OUI for TC group
ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
ALSA: usb-audio: Fix missing endian conversion
ALSA: usb-audio: Fix forgotten conversion of control query functions
...
This round of fixes has two larger changes that came in last week:
- A set of a couple of patches all intended to finally turn on
USB support on various Amlogic SoC based boards. The respective
driver were not finalized until very late before the merge window
and the DT portion is the last bit now.
- A defconfig update for gemini that had repeatedly missed the
cut but that is required to actually boot any real machines
with the default build.
The rest are the usual small changes:
- A fix for a nasty build regression on the OMAP memory drivers
- A fix for a boot problem on Intel/Altera SocFPGA
- A MAINTAINER file update
- A couple of fixes for issues found by automated testing
(kernelci, coverity, sparse, ...)
- A few incorrect DT entries are updated to match the hardware
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJa4uqUAAoJEGCrR//JCVInP3IP/AoWoaUPZfnQQai9xJZnphAv
n0z24NJD7HikPN2zmZjZkjfF15aa9RCyYGcJFwVPAWl9uky/8NIR/3mu7s4fbuOR
aiVo2wjQDFA0UPdHw+4W+hDnMtlNvpxsycp13oJ3JSoZhgM9aqOki2xanYVB/l8I
Yd5dySR52DMs8rYJZ0HwQQHqnld6zhjxuKQzHDhr292rka+6y2WTzA1bcrpDcqQZ
8VRA2cIsaY703Gb/UvR3i+7j3fmlDjAVNDwECW06zohsXCCBMBwdlbnM02SLoCFy
oSRM7v6ypdh99JSASaMvWDog5feaTlTmJos0BHT+vkH5Rs0eGI7KLv5hrOcnbGCv
1OsI51B0jnbu680YyNo6XnJOGfPo3RjsoYrUTXRDxz6dnu6sp1Mj5Re/HCdmnEFI
l5LGjzlyYah7l+jGErItW4Tf/mSrboJpdrpS3f8ZxveFAyQMqIMt0I83OpPogtjN
7EWtEzw+FtCiCH7RHMP4tH5HLeLvJXSAkD2eRj622+r8L0Q9xWzFOoVhufNYYB80
Q9Fb6zJ/GQG9azDN84k19lPk/I0DgQMcjolTtBUVKre96AP3SUpR+YuAsUztpig8
CHZok8NolXzRqFSsNQiwSr0GOrKETNbgshepolHpuKZ4PTVTJcqRxvxK6sFmKmx/
BfKYsx/0iQYDSpnRF74g
=Zhll
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This round of fixes has two larger changes that came in last week:
- a couple of patches all intended to finally turn on USB support on
various Amlogic SoC based boards. The respective driver were not
finalized until very late before the merge window and the DT
portion is the last bit now.
- a defconfig update for gemini that had repeatedly missed the cut
but that is required to actually boot any real machines with the
default build.
The rest are the usual small changes:
- a fix for a nasty build regression on the OMAP memory drivers
- a fix for a boot problem on Intel/Altera SocFPGA
- a MAINTAINER file update
- a couple of fixes for issues found by automated testing (kernelci,
coverity, sparse, ...)
- a few incorrect DT entries are updated to match the hardware"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: defconfig: Update Gemini defconfig
ARM: s3c24xx: jive: Fix some GPIO names
HISI LPC: Add Kconfig MFD_CORE dependency
ARM: dts: Fix NAS4220B pin config
MAINTAINERS: Remove myself as maintainer
arm64: dts: correct SATA addresses for Stingray
ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller
ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller
ARM64: dts: meson-gxl-s905x-libretech-cc: enable the USB controller
ARM64: dts: meson-gx-p23x-q20x: enable the USB controller
ARM64: dts: meson-gxl-s905x-p212: enable the USB controller
ARM64: dts: meson-gxm: add GXM specific USB host configuration
ARM64: dts: meson-gxl: add USB host support
ARM: OMAP2+: Fix build when using split object directories
soc: bcm2835: Make !RASPBERRYPI_FIRMWARE dummies return failure
soc: bcm: raspberrypi-power: Fix use of __packed
ARM: dts: Fix cm2 and prm sizes for omap4
ARM: socfpga_defconfig: Remove QSPI Sector 4K size force
firmware: arm_scmi: remove redundant null check on array
arm64: dts: juno: drop unnecessary address-cells and size-cells properties
e7bfb3fdbd ("mtd: Stop updating erase_info->state and calling
mtd_erase_callback()")
* Fix a memory leak in the Tango NAND controller driver
* Fix read/write to a suspended erase block in the CFI driver
* Fix the DT parsing logic in the Marvell NAND controller driver
-----BEGIN PGP SIGNATURE-----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=myWm
-----END PGP SIGNATURE-----
Merge tag 'mtd/fixes-for-4.17-rc3' of git://git.infradead.org/linux-mtd
Pull mtd fixes from Boris Brezillon:
- Fix nanddev_mtd_erase() function to match the changes done in
e7bfb3fdbd ("mtd: Stop updating erase_info->state and calling
mtd_erase_callback()")
- Fix a memory leak in the Tango NAND controller driver
- Fix read/write to a suspended erase block in the CFI driver
- Fix the DT parsing logic in the Marvell NAND controller driver
* tag 'mtd/fixes-for-4.17-rc3' of git://git.infradead.org/linux-mtd:
mtd: rawnand: marvell: fix the chip-select DT parsing logic
mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block.
mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug.
mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.
mtd: spi-nor: cadence-quadspi: Fix page fault kernel panic
mtd: nand: Fix nanddev_mtd_erase()
mtd: rawnand: tango: Fix struct clk memory leak
-----BEGIN PGP SIGNATURE-----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=hboJ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.17-rc3' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Pretty run of the mill for this stage in the cycle: msm, i915, amdgpu,
qxl, virtio-gpu, sun4i fixes.
i915:
- Black screen fixes
- Display w/a fix
- HDA codec interop fix
sun4i:
- tbsa711 tablet regression fix
qxl:
- Regression fixes due to changes in TTM
virtio:
- Fix wait event condition
msm:
- DSI display fixes
amdgpu:
- fix hang on Carrizo
- DP MST hang fixes
- irq handling deadlock in DC.
amdkfd:
- Fix Kconfig issue
- Clock retrieval fix
- Sparse fixes"
* tag 'drm-fixes-for-v4.17-rc3' of git://people.freedesktop.org/~airlied/linux: (27 commits)
drm/edid: Reset more of the display info
drm/virtio: fix vq wait_event condition
qxl: keep separate release_bo pointer
qxl: fix qxl_release_{map,unmap}
Revert "drm/sun4i: add lvds mode_valid function"
drm/amd/display: Check dc_sink every time in MST hotplug
drm/amd/display: Update MST edid property every time
drm/amd/display: Don't read EDID in atomic_check
drm/amd/display: Disallow enabling CRTC without primary plane with FB
drm/amd/display: Fix deadlock when flushing irq
drm/i915/fbdev: Enable late fbdev initial configuration
drm/i915: Use ktime on wait_for
drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shaders
drm/amdkfd: fix build, select MMU_NOTIFIER
drm/amdkfd: fix clock counter retrieval for node without GPU
drm/amdkfd: Fix the error return code in kfd_ioctl_unmap_memory_from_gpu()
drm/amdkfd: kfd_dev_is_large_bar() can be static
drm/i915: Enable display WA#1183 from its correct spot
drm/i915/audio: set minimum CD clock to twice the BCLK
drm/msm: don't deref error pointer in the msm_fbdev_create error path
...
Currently, KVM flushes the TLB after a change to the APIC access page
address or the APIC mode when EPT mode is enabled. However, even in
shadow paging mode, a TLB flush is needed if VPIDs are being used, as
specified in the Intel SDM Section 29.4.5.
So replace vmx_flush_tlb_ept_only() with vmx_flush_tlb(), which will
flush if either EPT or VPIDs are in use.
Signed-off-by: Junaid Shahid <junaids@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
32-bit user code that uses int $80 doesn't care about r8-r11. There is,
however, some 64-bit user code that intentionally uses int $0x80 to invoke
32-bit system calls. From what I've seen, basically all such code assumes
that r8-r15 are all preserved, but the kernel clobbers r8-r11. Since I
doubt that there's any code that depends on int $0x80 zeroing r8-r11,
change the kernel to preserve them.
I suspect that very little user code is broken by the old clobber, since
r8-r11 are only rarely allocated by gcc, and they're clobbered by function
calls, so they only way we'd see a problem is if the same function that
invokes int $0x80 also spills something important to one of these
registers.
The current behavior seems to date back to the historical commit
"[PATCH] x86-64 merge for 2.6.4". Before that, all regs were
preserved. I can't find any explanation of why this change was made.
Update the test_syscall_vdso_32 testcase as well to verify the new
behavior, and it strengthens the test to make sure that the kernel doesn't
accidentally permute r8..r15.
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Link: https://lkml.kernel.org/r/d4c4d9985fbe64f8c9e19291886453914b48caee.1523975710.git.luto@kernel.org
A bugfix broke the x32 shmid64_ds and msqid64_ds data structure layout
(as seen from user space) a few years ago: Originally, __BITS_PER_LONG
was defined as 64 on x32, so we did not have padding after the 64-bit
__kernel_time_t fields, After __BITS_PER_LONG got changed to 32,
applications would observe extra padding.
In other parts of the uapi headers we seem to have a mix of those
expecting either 32 or 64 on x32 applications, so we can't easily revert
the path that broke these two structures.
Instead, this patch decouples x32 from the other architectures and moves
it back into arch specific headers, partially reverting the even older
commit 73a2d096fd ("x86: remove all now-duplicate header files").
It's not clear whether this ever made any difference, since at least
glibc carries its own (correct) copy of both of these header files,
so possibly no application has ever observed the definitions here.
Based on a suggestion from H.J. Lu, I tried out the tool from
https://github.com/hjl-tools/linux-header to find other such
bugs, which pointed out the same bug in statfs(), which also has
a separate (correct) copy in glibc.
Fixes: f4b4aae182 ("x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H . J . Lu" <hjl.tools@gmail.com>
Cc: Jeffrey Walton <noloader@gmail.com>
Cc: stable@vger.kernel.org
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20180424212013.3967461-1-arnd@arndb.de
Xen PV domains cannot shut down and start a crash kernel. Instead,
the crashing kernel makes a SCHEDOP_shutdown hypercall with the
reason code SHUTDOWN_crash, cf. xen_crash_shutdown() machine op in
arch/x86/xen/enlighten_pv.c.
A crash kernel reservation is merely a waste of RAM in this case. It
may also confuse users of kexec_load(2) and/or kexec_file_load(2).
When flags include KEXEC_ON_CRASH or KEXEC_FILE_ON_CRASH,
respectively, these syscalls return success, which is technically
correct, but the crash kexec image will never be actually used.
Signed-off-by: Petr Tesarik <ptesarik@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Dou Liyang <douly.fnst@cn.fujitsu.com>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: xen-devel@lists.xenproject.org
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jean Delvare <jdelvare@suse.de>
Link: https://lkml.kernel.org/r/20180425120835.23cef60c@ezekiel.suse.cz
We found the I2C controller count register is unreliable sometimes,
that will cause I2C to lose data. Thus we can read the data count
from 'i2c_dev->count' instead of the I2C controller count register.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
