Set one of the planes for each crtc driver as a cursor plane enabled
window managers to fully work on exynos.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Define DEFAULT_WIN as zero to help set the primary plane on all CRTCs.
Some CRTCs were defining a variable to store the default window, but that
is not necessary as the default (primary) window is always the window zero.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fimd_dp_clock_enable() was setting the always to enabled,
this patch fix this to actually use the value that is set to 'val'.
Reported-by: Emilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The only thing mode_fixup was doing was set the adjusted_mode->vrefresh to
60, but it already has the value of 60 when the fimd_mode_fixup() is
called. That means this call is actually pointless and can be removed.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Exynos DRM reported that all planes for all supported sub-devices supports
only three pixel formats: XRGB24, ARGB24 and NV12. This patch lets each
Exynos DRM sub-drivers to provide the list of supported pixel formats
and registers this list to DRM core.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fimd_update_plane() programs BUF_START[win] and during the update
BUF_START[win] is copied to BUF_START_S[win] (its shadow register)
and starts scanning out, then it raises a irq.
The fimd_irq_handler, in the case we have a pending_fb, will check
the fb value was copied to START_S register and finish the update
in case of success.
Based on patch from Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The current code was ignoring the end of update for all overlay planes,
caring only for the primary plane update in case of pageflip.
This change adds a change to start to check for pending updates for all
planes through exynos_plane->pending_fb. At the start of plane update the
pending_fb is set with the fb to be shown on the screen. Then only when to
fb is already presented in the screen we set pending_fb to NULL to
signal that the update was finished.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
fixup! drm/exynos: check for pending fb before finish update
Only set/clear the update bit in the CRTC's .atomic_begin()/flush()
so all planes are really committed at the same time.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Unify handling of finished plane update to prepare for a following patch
that will check for the START and START_S regs to really make sure that
the plane was updated.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct exynos_drm_encoder was justing wrapping struct drm_encoder, it had
only a drm_encoder member and the internal exynos_drm_encoders ops that
was directly mapped to the drm_encoder helper funcs.
So now exynos DRM uses struct drm_encoder directly, this removes
completely the struct exynos_drm_encoder.
v2: add empty .mode_fixup() and .mode_set() to DSI and DPI to avoid null
pointer.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This functions was just hiding the encoder and connector creation in
a way that was less clean than if we get rid of it. For example,
exynos_encoder ops had .create_connector() defined only because we were
handing off the encoder and connector creation to
exynos_drm_create_enc_conn(). Without this function we can directly call
the create_connector function internally in the code, without the need of
any vtable access.
It also does some refactoring in the code like creating a bind function
for dpi devices.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This struct was just representing encoder information, it was a member of
struct exynos_drm_encoder, so any code trying to access encoder data would
have to go through the encoder struct, get the display struct and then get
the data it want.
During this patchset we also realized that the only data
exynos_drm_encoder needs to store is the drm_encoder parent and the
exynos_drm_encoder_ops.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Rename crtc_{widht,height} to crtc_{w,h} and src_{width,height} to
src_{w,h} to make it similar to the atomic state names.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
For some fields the use of struct exynos_drm_plane filled with data from
the plane state just creates a source of duplicated information and
overhead. Here we change the crtc drivers to access the plane state
directly simplifying the code by not relying on a exynos internal struct.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We already have the plane pointer in before calling .update_plane() or
disable_plane() so pass it directly to those calls avoiding a new
conversion from zpos to struct exynos_drm_plane.
v2: don't remove check for suspended in FIMD (comment by Joonyoung)
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The same check is placed twice in fimd/decon_update_plane(), remove
one of them.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Get rid of legacy DRM vblank function that are less clear to use.
The new ones basically requires only the crtc as parameters.
It also clean ups exynos_drm_crtc_finish_pageflip() parameters as a
consequence.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Reviewed-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This is simplest solution about reported problem[1]. It's no problem to
clear channel only when iommu is enabled, if we consider that we cannot
recognize iommu errors when iommu is disabled and it have been valid
until now. But this cannot be nice solution.
[1] https://lkml.org/lkml/2015/7/21/404
Reported-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Already drm_iommu_attach_device checks whether support iommu internally.
It should clear channels always regardless iommu support. We didn't know
because we can detect the problem when iommu is enabled, so we don't
have to use drm_iommu_attach_device_if_possible and then we can remove
drm_iommu_attach_device_if_possible and clear_channels function pointer.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Already drm_iommu_attach_device and drm_iommu_detach_device check
whether support iommu internally, so we don't have to call
is_drm_iommu_supported before call them.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Every CRTC drivers in Exynos DRM implements the code which checks
whether IOMMU is supported or not, and if supported enable it.
Making new helper for it generalize each CRTC drivers.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch resolves page fault issue with iommu and atomic feature
when modetest test application is terminated.
ENWIN_F field of WINCONx register enables or disable a dma channel to
each hardware overlay - the value of the field will be updated to real
register after vsync.
So this patch makes sure the dma channel is disabled by waiting for vsync
one time after clearing shadow registers to all dma channels.
Below shows the page fault issue:
setting mode 720x1280-60Hz@XR24 on connectors 31, crtc 29
freq: 59.99Hz
[ 34.831025] PAGE FAULT occurred at 0x20400000 by 11e20000.sysmmu(Page
table base: 0x6e324000)
[ 34.838072] Lv1 entry: 0x6e92dc01
[ 34.841489] ------------[ cut here ]------------
[ 34.846058] kernel BUG at drivers/iommu/exynos-iommu.c:364!
[ 34.851614] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
[ 34.857428] Modules linked in:
<--snip-->
[ 35.210894] [<c02880d0>] (exynos_sysmmu_irq) from [<c00608f8>]
(handle_irq_event_percpu+0x78/0x134)
[ 35.219914] [<c00608f8>] (handle_irq_event_percpu) from [<c00609f0>]
(handle_irq_event+0x3c/0x5c)
[ 35.228768] [<c00609f0>] (handle_irq_event) from [<c0063698>]
(handle_level_irq+0xc4/0x13c)
[ 35.237101] [<c0063698>] (handle_level_irq) from [<c005ff7c>]
(generic_handle_irq+0x2c/0x3c)
[ 35.245521] [<c005ff7c>] (generic_handle_irq) from [<c02214ec>]
(combiner_handle_cascade_irq+0x94/0x100)
[ 35.254980] [<c02214ec>] (combiner_handle_cascade_irq) from
[<c005ff7c>] (generic_handle_irq+0x2c/0x3c)
[ 35.264353] [<c005ff7c>] (generic_handle_irq) from [<c0060248>]
(__handle_domain_irq+0x7c/0xec)
[ 35.273034] [<c0060248>] (__handle_domain_irq) from [<c0009434>]
(gic_handle_irq+0x30/0x68)
[ 35.281366] [<c0009434>] (gic_handle_irq) from [<c0012ec0>]
(__irq_svc+0x40/0x74)
Signed-off-by: Inki Dae <inki.dae@samsung.com>
One should not do any assumptions on the stare of the fimd hardware
during driver initialization, so to properly reset fimd before enabling
IOMMU, one should ensure that all power domains and clocks are really
enabled. This patch adds pm_runtime and clocks management in the
fimd_clear_channel() function to ensure that any access to fimd
registers will be performed with clocks and power domains enabled.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When the fimd is disabled by fimd_disable(), enabled overlay layers also
are disabled. If clocks for fimd are enabled by fimd_enable() on this
case, it can lead IOMMU page fault. The reason is that VIDCON0_ENVID and
VIDCON0_ENVID_F bits of VIDCON0 register are set still even though fimd
is disabled, so it may continue display output of prior when clocks for
fimd are enabled again.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
With atomic modesetting all the control for CRTC, Planes, Encoders and
Connectors should come from DRM core, so the driver is not allowed to
enable or disable planes from inside the crtc_enable()/disable() call.
But it needs to disable planes with crtc_disable in exynos driver
internally. Because crtc is disabled before plane is disabled, it means
plane_disable just returns without any register changes, then we cannot
be sure setting register to disable plane when crtc is disable.
This patch removes this chainned calls to enable plane from exynos hw
drivers code letting only DRM core touch planes except to disable plane.
Also it leads eliminable enabled and resume of struct exynos_drm_plane.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In case there are multiple pipelines and deferred probe occurs, only components
of the first pipeline were bound. As a result only one pipeline was available.
The main cause of this issue was dynamic generation of component match table -
every component driver during probe registered itself on helper list, if there
was at least one pipeline present on this list component match table were
created without deferred components.
This patch removes this helper list, instead it creates match table from
existing devices requiring exynos_drm KMS drivers. This way match table do not
depend on probe/deferral order and contains all KMS components.
As a side effect patch makes the code cleaner and significantly smaller.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
To follow more closely the new atomic API we split the dpms()
helper into the enable() and disable() helper to get exactly the
same semantics.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Handle changes by removing copy from adjusted_mode to mode as using
adjusted_mode of crtc_state.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The index for the hardware layer is always >=0. Previous
code that also used -1 as special index is now gone.
Also apply this to 'ch_enabled' (decon/fimd), since the
variable is on the same line (and is again always unsigned).
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Simplify the code and remove superfluous return statement. Just return
the result of fimd_iommu_attach_devices().
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The Exynos DRM code does not modify the ops provided by CRTC driver in
exynos_drm_crtc_create() call.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Disabling the CONFIG_DRM_EXYNOS_FIMD (e.g. by enabling of CONFIG_FB_S3C)
leads to build error:
drivers/built-in.o: In function `exynos_dp_dpms':
binder.c:(.text+0xd6a840): undefined reference to `fimd_dp_clock_enable'
binder.c:(.text+0xd6ab54): undefined reference to `fimd_dp_clock_enable'
Fix this by changing direct call to fimd_dp_clock_enable() into optional
call to exynos_drm_crtc_ops->clock_enable(). Only the DRM_EXYNOS_FIMD
implements this op.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Commit adacb228d7 ("drm: Exynos: Respect framebuffer pitch for
FIMD/Mixer") fixed the buffer size calculation by using the FB
pitch value but later commit 26b9c2813ede1 ("drm/exynos: remove
struct *_win_data abstraction on planes") added a regression so
fix the buffer size calculation again.
Tested on Chromebook Snow / Peach Pit.
Fixes: 26b9c2813ede1 ("drm/exynos: remove struct *_win_data abstraction on planes")
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
After adding display power domain for Exynos5250 in commit
2d2c9a8d0a ("ARM: dts: add display power domain for exynos5250") the
display on Chromebook Snow and others stopped working after boot.
The reason for this suggested Andrzej Hajda: the DP clock was disabled.
This clock is required by Display Port and is enabled by bootloader.
However when FIMD driver probing was deferred, the display power domain
was turned off. This effectively reset the value of DP clock enable
register.
When exynos-dp is later probed, the clock is not enabled and display is
not properly configured:
exynos-dp 145b0000.dp-controller: Timeout of video streamclk ok
exynos-dp 145b0000.dp-controller: unable to config video
Fixes: 2d2c9a8d0a ("ARM: dts: add display power domain for exynos5250")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reported-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
>From the commit "drm/exynos: fix the execution order in FIMD
initialization" (598285bfdce46d7c47632a2ba4b980f60be4a677), the error
checking code is removed improperly. This patch fix the regression.
Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It's more reasonable to use src_x and src_y to represent source as
counterpart of destination(crtc). Already we are using src_width and
src_height for width and height of source.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Usually userspace don't want to have two overlay planes on the same zpos
so this change assign a different zpos for each plane. Before this change
a zpos of value zero was created for all planes so the userspace had to
set up the zpos of every plane it wanted to use.
Also all places that were storing zpos positions are now unsigned int.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
struct {fimd,mixer,vidi}_win_data was just keeping the same data
as struct exynos_drm_plane thus get ride of it and use exynos_drm_plane
directly.
It changes how planes are created and remove .win_mode_set() callback
that was only filling all *_win_data structs.
v2: check for return of exynos_plane_init()
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
XR24 planes were not shown properly, so now set the right registers
to correctly enable displaying these planes.
It also moves the alpha register settings to fimd_win_set_pixfmt()
to keep all pixel format stuff together.
v2: remove leftover var alpha
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
When performing a modeset, use the framebuffer pitch value to set FIMD
IMG_SIZE and Mixer SPAN registers. These are both defined as pitch - the
distance between contiguous lines (bytes for FIMD, pixels for mixer).
Fixes display on Snow (1366x768).
Signed-off-by: Daniel Stone <daniels@collabora.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use driver internal struct as argument instead of struct exynos_drm_crtc
except functions of exynos_drm_crtc_ops and instead of struct
exynos_drm_display except functions of exynos_drm_display_ops.
It can reduce unnecessary variable declaration.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
We get wrong pipe value for crtc since commit 93bca243ec ("drm/exynos:
remove struct exynos_drm_manager"). We should should increase pipe value
before call exynos_drm_crtc_create.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
check error status for drm_iommu_attach_device() and make sure
it propagates till the caller.
Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>
We can safely use the mode stored in the crtc.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
exynos_drm_manager was just a redundant struct to represent the crtc as
well. In this commit we merge exynos_drm_manager into exynos_drm_crtc to
remove an unnecessary level of indirection easing the understand of the
flow on exynos.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
manager-drm_dev is only accessed by exynos_drm_crtc_create() so this patch
pass drm_dev as argument on exynos_drm_crtc_create() and remove it from
struct exynos_drm_manager.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
'type' is now part of the struct exynos_drm_crtc. This is just another
step in the struct exynos_drm_manager removal.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
