Move object release into a separate worker. Releasing objects requires
sending commands to the host. Doing that in the dequeue worker will
cause deadlocks in case the command queue gets filled up, because the
dequeue worker is also the one which will free up slots in the command
queue.
Reported-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Tested-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190830060116.10476-1-kraxel@redhat.com
virtio-gpu basically needs a sg_table for the bo, to tell the host where
the backing pages for the object are. So the gem shmem helpers are a
perfect fit. Some drm_gem_object_funcs need thin wrappers to update the
host state, but otherwise the helpers handle everything just fine.
Once the fencing was sorted the switch was surprisingly easy and for the
most part just removing the ttm code.
v4: fix drm_gem_object_funcs name.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-15-kraxel@redhat.com
Rework fencing workflow. Stop using ttm helpers, use the
virtio_gpu_array_* helpers instead.
Due to using the gem reservation object it is initialized and ready for
use before calling ttm_bo_init. So we can simply use the standard
fencing workflow and drop the tricky logic which checks whenever the
command is in flight still.
v6: rewrite most of the patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-10-kraxel@redhat.com
Rework fencing workflow, starting with virtio_gpu_execbuffer_ioctl.
Stop using ttm helpers, use the virtio_gpu_array_* helpers (which work
on the reservation objects directly) instead.
Also store the object array in struct virtio_gpu_vbuffer, so we
explicitly keep a reference of all buffers used instead of depending
on ttm_bo_put() checking whenever the object is actually idle before
releasing it.
New workflow:
(1) All gem objects needed by a command are added to a
virtio_gpu_object_array.
(2) All reservation objects will be locked (virtio_gpu_array_lock_resv).
(3) virtio_gpu_fence_emit() completes fence initialization.
(4) fence gets added to the objects, reservation objects are unlocked
(virtio_gpu_array_add_fence, virtio_gpu_array_unlock_resv).
(5) virtio command is submitted to the host.
(6) The completion callback (virtio_gpu_dequeue_ctrl_func)
will drop object references and free virtio_gpu_object_array.
v6: rewrite most of the patch.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-9-kraxel@redhat.com
Some helper functions to manage an array of gem objects.
v9: use dma_resv_lock_interruptible.
v6:
- add ticket to struct virtio_gpu_object_array.
- add virtio_gpu_array_{lock,unlock}_resv helpers.
- add virtio_gpu_array_add_fence helper.
v5: some small optimizations (Chia-I Wu).
v4: make them virtio-private instead of generic helpers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-8-kraxel@redhat.com
Use drm_gem_reservation_object_wait() in virtio_gpu_wait_ioctl().
This also makes the ioctl run lockless.
v9: fix return value.
v5: handle lookup failure.
v2: use reservation_object_test_signaled_rcu for VIRTGPU_WAIT_NOWAIT.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-3-kraxel@redhat.com
With this gem and ttm will use the same reservation object,
so mixing and matching ttm / gem reservation helpers should
work fine.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190829103301.3539-2-kraxel@redhat.com
Declare local pointer to the drm_dp_link_address_ack_reply struct
instead of constantly dereferencing it through the union in
txmsg->reply. Then, invert the order of conditionals so we don't have to
do the bulk of the work inside them, and can wrap lines even less. Then
finally, rearrange variable declarations a bit.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-16-lyude@redhat.com
* Remove the big ugly have_eomt conditional
* Store &mgr->down_rep_recv.initial_hdr in a var to make line wrapping
easier
* Remove duplicate memset() calls
* Actually wrap lines
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-14-lyude@redhat.com
There's a couple of changes here, so to summarize:
* Remove the big ugly mgr->up_req_recv.have_eomt conditional to save on
indenting
* Store &mgr->up_req_recv.initial_hdr in a variable so we don't keep
going over 80 character long lines
* De-duplicate code for calling drm_dp_send_up_ack_reply() and getting
the MSTB via it's GUID
* Remove all of the duplicate calls to memset() and just use a goto
instead
* Actually do line wrapping
* Remove the unnecessary if (mstb) check before calling
drm_dp_mst_topology_put_mstb() - we are guaranteed to always have
mstb != NULL at that point in the function
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-13-lyude@redhat.com
And it's helper, we'll be using this in just a moment.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-12-lyude@redhat.com
Which reduces indentation and makes this function more legible.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-11-lyude@redhat.com
Use more pointers so we don't have to write out
txmsg->reply.u.path_resources each time. Also, fix line wrapping +
rearrange local variables.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-10-lyude@redhat.com
Unfortunately the DP MST helpers do not have much in the way of
debugging utilities. So, let's add some!
This adds basic debugging output for down sideband requests that we send
from the driver, so that we can actually discern what's happening when
sideband requests timeout.
Since there wasn't really a good way of testing that any of this worked,
I ended up writing simple selftests that lightly test sideband message
encoding and decoding as well. Enjoy!
Changes since v1:
* Clean up DO_TEST() and sideband_msg_req_encode_decode() - danvet
* Get rid of pr_fmt(), just define a prefix string instead and use
drm_printf()
* Check highest bit of VCPI in drm_dp_decode_sideband_req() - danvet
* Make the switch case order between drm_dp_decode_sideband_req() and
drm_dp_encode_sideband_req() the same - danvet
* Only check DRM_UT_DP - danvet
* Clean up sideband_msg_req_equal() from selftests a bit, and add
comments explaining why we can't just use memcmp - danvet
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-8-lyude@redhat.com
Noticed this while working on adding a drm_dp_decode_sideband_req().
DP_POWER_DOWN_PHY/DP_POWER_UP_PHY both use the same struct as
DP_ENUM_PATH_RESOURCES, so we can just combine their cases.
Changes since v2:
* Fix commit message
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903215702.16984-1-lyude@redhat.com
A simple convienence function that returns a drm_printer which prints
using pr_err()
Changes since v1:
* Make __drm_printfn_err() more consistent with DRM_ERROR() - danvet
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-6-lyude@redhat.com
Yes, apparently we've been testing this for every single driver load for
quite a long time now. At least that means our PBN calculation is solid!
Anyway, introduce self tests for MST and move this into there.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-5-lyude@redhat.com
This seems to be some leftover detritus from before the port/mstb kref
cleanup and doesn't do anything anymore, so get rid of it.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-3-lyude@redhat.com
Makes things easier to read.
Cc: Juston Li <juston.li@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <hwentlan@amd.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190903204645.25487-2-lyude@redhat.com
We can reduce the critical section in vkms_vblank_simulate under
output->lock quite a lot:
- hrtimer_forward_now just needs to be ordered correctly wrt
drm_crtc_handle_vblank. We already access the hrtimer timestamp
without locks. While auditing that I noticed that we don't correctly
annotate the read there, so sprinkle a READ_ONCE to make sure the
compiler doesn't do anything foolish.
- drm_crtc_handle_vblank must stay under the lock to avoid races with
drm_crtc_arm_vblank_event.
- The access to vkms_ouptut->crc_state also must stay under the lock.
- next problem is making sure the output->state structure doesn't get
freed too early. First we rely on a given hrtimer being serialized:
If we call drm_crtc_handle_vblank, then we are guaranteed that the
previous call to vkms_vblank_simulate has completed. The other side
of the coin is that the atomic updates waits for the vblank to
happen before it releases the old state. Both taken together means
that by the time the atomic update releases the old state, the
hrtimer won't access it anymore (it might be accessing the new state
at the same time, but that's ok).
- state is invariant, except the few fields separate protected by
state->crc_lock. So no need to hold the lock for that.
- finally the queue_work. We need to make sure there's no races with
the flush_work, i.e. when we call flush_work we need to guarantee
that the hrtimer can't requeue the work again. This is guaranteed by
the same vblank/hrtimer ordering guarantees like the reasoning above
why state won't be freed too early: flush_work on the old state is
called after wait_for_flip_done in the atomic commit code.
Therefore we can also move everything after the output->crc_state out
of the critical section.
Motivated by suggestions from Rodrigo.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719152314.7706-3-daniel.vetter@ffwll.ch
It's the recommended version, wait_for_vblanks is a bit a hacky
interim thing that predates all the flip_done tracking. It's
unfortunately still the default ...
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190719152314.7706-2-daniel.vetter@ffwll.ch
Noticed while reviewing code. I'm not sure whether this might or might
not explain some of the missed vblank hilarity we've been seeing on
various drivers (but those got tracked down to driver issues, at least
mostly). I think those all go through the vblank completion event,
which has unconditional barriers - it always takes the spinlock.
Therefore no cc stable.
v2:
- Barrriers are hard, put them in in the right order (Chris).
- Improve the comments a bit.
v3:
Ville noticed that on 32bit we might be breaking up the load/stores,
now that the vblank counter has been switched over to be 64 bit. Fix
that up by switching to atomic64_t. This this happens so rarely in
practice I figured no need to cc: stable ...
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Keith Packard <keithp@keithp.com>
References: 570e86963a ("drm: Widen vblank count to 64-bits [v3]")
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190723131337.22031-1-daniel.vetter@ffwll.ch
Store the timestamp of the current vblank in the new field 'time' of the
vblank trace event. If the timestamp is calculated by a driver that
supports high-precision vblank timing, set the field 'high-prec' to
'true'.
User space can now access actual hardware vblank times via the tracing
infrastructure. Tracing applications (such as GPUVis, see [0] for
related discussion), can use the newly added information to conduct a
more accurate analysis of display timing.
v2 Fix author name (missing last name)
[0] https://github.com/mikesart/gpuvis/issues/30
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Heinrich Fink <heinrich.fink@daqri.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902142412.27846-2-heinrich.fink@daqri.com
The sti_hdmi.c file include <linux/of_gpio.h> despite not even
using any GPIOs.
What it does use is devm_ioremap_nocache() which comes from
<linux/io.h> implicitly by including that header.
Fix this up by including the right header instead.
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823071428.6155-1-linus.walleij@linaro.org
Use the new cec_notifier_conn_(un)register() functions to
(un)register the notifier for the HDMI connector, and fill
in the cec_connector_info.
Changes since v2:
Don't invalidate physical address before unregistering the
notifier.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190814104520.6001-7-darekm@google.com
In the designware databook, the sequence of enabling audio clock and
setting format is not clearly specified.
Currently, audio clock is enabled in the end of hw_param ops after
setting format.
On some monitors, there is a possibility that audio does not come out.
Fix this by enabling audio clock in audio_startup ops
before hw_param ops setting format.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190902035435.44463-1-cychiang@chromium.org
This is part of our attempt to make the bridge chain a double-linked
list based on the generic list helpers. In order to do that, we must
patch all drivers manipulating the encoder->bridge field directly.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-9-boris.brezillon@collabora.com
We are about to add a drm_bridge_state that inherits from
drm_private_state which is defined in drm_atomic.h. Problem is,
drm_atomic.h includes drm_crtc.h which in turn includes drm_bridge.h,
leading to "drm_private_state has incomplete type" error.
Let's force all users of the drm_bridge API to explicitly include
drm_bridge.h.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190826152649.13820-2-boris.brezillon@collabora.com
Add the suspend and resume hooks to:
- save and disable the entire DRM driver on suspend
- re-init the entire VPU subsystem on resume, to recover CRTC and pixel
generator functionnal usage after DDR suspend, then recover DRM driver
state
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-3-narmstrong@baylibre.com
Add the suspend and resume hooks to:
- reset the whole HDMI glue and HDMI controller on suspend
- re-init the HDMI glue and HDMI controller on resume
The HDMI glue init is refactored to be re-used from the resume hook.
It makes usage of dw_hdmi_resume() to recover a functionnal DDC bus.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed typo in commit log, and rebased on drm-misc-next]
Link: https://patchwork.freedesktop.org/patch/msgid/20190827095825.21015-2-narmstrong@baylibre.com
Split virtqueue_kick() call into virtqueue_kick_prepare(), which
requires serialization, and virtqueue_notify(), which does not. Move
the virtqueue_notify() call out of the critical section protected by the
queue lock. This avoids triggering a vmexit while holding the lock and
thereby fixes a rather bad spinlock contention.
Suggested-by: Chia-I Wu <olvaffe@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190813082509.29324-3-kraxel@redhat.com
Fill in the connector info, allowing userspace to associate
the CEC device with the drm connector.
Tested on a Raspberry Pi 3B.
Signed-off-by: Dariusz Marcinkiewicz <darekm@google.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823112427.42394-2-hverkuil-cisco@xs4all.nl
