Claudiu Manoil says:
====================
enetc: Add mdio support and device tree nodes
This is the missing part to enable PCI probing of the ENETC ethernet
ports on the LS1028A SoC and external traffic on the LS1028A RDB board.
It's one of the first items on the TODO list for the recently merged
ENETC ethernet driver.
v3: Add DT bindings doc for ENETC connections
v4: none
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Define connection bindings (external PHY connections and internal links)
for the ENETC on-chip ethernet controllers.
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Each ENETC PF has its own MDIO interface, the corresponding
MDIO registers are mapped in the ENETC's Port register block.
The current patch adds a driver for these PF level MDIO buses,
so that each PF can manage directly its own external link.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The LS1028A RDB board features an Atheros PHY connected over
SGMII to the ENETC PF0 (or Port0). ENETC Port1 (PF1) has no
external connection on this board, so it can be disabled for now.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The LS1028A SoC features a PCI Integrated Endpoint Root Complex
(IERC) defining several integrated PCI devices, including the ENETC
ethernet controller integrated endpoints (IEPs). The IERC implements
ECAM (Enhanced Configuration Access Mechanism) to provide access
to the PCIe config space of the IEPs. This means the the IEPs
(including ENETC) do not support the standard PCIe BARs, instead
the Enhanced Allocation (EA) capability structures in the ECAM space
are used to fix the base addresses in the system, and the PCI
subsystem uses these structures for device enumeration and discovery.
The "ranges" entries contain basic information from these EA capabily
structures required by the kernel for device enumeration.
The current patch also enables the first 2 ENETC PFs (Physiscal
Functions) and the associated VFs (Virtual Functions), 2 VFs for
each PF. Each of these ENETC PFs has an external ethernet port
on the LS1028A SoC.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One important patch:
- Fix for a memory corruption issue in the Intel VT-d driver
that triggers on hardware with deep PCI hierarchies
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=H9KF
-----END PGP SIGNATURE-----
Merge tag 'iommu-fix-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fix from Joerg Roedel:
"One important fix for a memory corruption issue in the Intel VT-d
driver that triggers on hardware with deep PCI hierarchies"
* tag 'iommu-fix-v5.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dmar: Fix buffer overflow during PCI bus notification
Merge misc fixes from Andrew Morton:
"2 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
hugetlbfs: fix races and page leaks during migration
kasan: turn off asan-stack for clang-8 and earlier
hugetlb pages should only be migrated if they are 'active'. The
routines set/clear_page_huge_active() modify the active state of hugetlb
pages.
When a new hugetlb page is allocated at fault time, set_page_huge_active
is called before the page is locked. Therefore, another thread could
race and migrate the page while it is being added to page table by the
fault code. This race is somewhat hard to trigger, but can be seen by
strategically adding udelay to simulate worst case scheduling behavior.
Depending on 'how' the code races, various BUG()s could be triggered.
To address this issue, simply delay the set_page_huge_active call until
after the page is successfully added to the page table.
Hugetlb pages can also be leaked at migration time if the pages are
associated with a file in an explicitly mounted hugetlbfs filesystem.
For example, consider a two node system with 4GB worth of huge pages
available. A program mmaps a 2G file in a hugetlbfs filesystem. It
then migrates the pages associated with the file from one node to
another. When the program exits, huge page counts are as follows:
node0
1024 free_hugepages
1024 nr_hugepages
node1
0 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
That is as expected. 2G of huge pages are taken from the free_hugepages
counts, and 2G is the size of the file in the explicitly mounted
filesystem. If the file is then removed, the counts become:
node0
1024 free_hugepages
1024 nr_hugepages
node1
1024 free_hugepages
1024 nr_hugepages
Filesystem Size Used Avail Use% Mounted on
nodev 4.0G 2.0G 2.0G 50% /var/opt/hugepool
Note that the filesystem still shows 2G of pages used, while there
actually are no huge pages in use. The only way to 'fix' the filesystem
accounting is to unmount the filesystem
If a hugetlb page is associated with an explicitly mounted filesystem,
this information in contained in the page_private field. At migration
time, this information is not preserved. To fix, simply transfer
page_private from old to new page at migration time if necessary.
There is a related race with removing a huge page from a file and
migration. When a huge page is removed from the pagecache, the
page_mapping() field is cleared, yet page_private remains set until the
page is actually freed by free_huge_page(). A page could be migrated
while in this state. However, since page_mapping() is not set the
hugetlbfs specific routine to transfer page_private is not called and we
leak the page count in the filesystem.
To fix that, check for this condition before migrating a huge page. If
the condition is detected, return EBUSY for the page.
Link: http://lkml.kernel.org/r/74510272-7319-7372-9ea6-ec914734c179@oracle.com
Link: http://lkml.kernel.org/r/20190212221400.3512-1-mike.kravetz@oracle.com
Fixes: bcc5422230 ("mm: hugetlb: introduce page_huge_active")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
[mike.kravetz@oracle.com: v2]
Link: http://lkml.kernel.org/r/7534d322-d782-8ac6-1c8d-a8dc380eb3ab@oracle.com
[mike.kravetz@oracle.com: update comment and changelog]
Link: http://lkml.kernel.org/r/420bcfd6-158b-38e4-98da-26d0cd85bd01@oracle.com
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building an arm64 allmodconfig kernel with clang results in over 140
warnings about overly large stack frames, the worst ones being:
drivers/gpu/drm/panel/panel-sitronix-st7789v.c:196:12: error: stack frame size of 20224 bytes in function 'st7789v_prepare'
drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td028ttec1.c:196:12: error: stack frame size of 13120 bytes in function 'td028ttec1_panel_enable'
drivers/usb/host/max3421-hcd.c:1395:1: error: stack frame size of 10048 bytes in function 'max3421_spi_thread'
drivers/net/wan/slic_ds26522.c:209:12: error: stack frame size of 9664 bytes in function 'slic_ds26522_probe'
drivers/crypto/ccp/ccp-ops.c:2434:5: error: stack frame size of 8832 bytes in function 'ccp_run_cmd'
drivers/media/dvb-frontends/stv0367.c:1005:12: error: stack frame size of 7840 bytes in function 'stv0367ter_algo'
None of these happen with gcc today, and almost all of these are the
result of a single known issue in llvm. Hopefully it will eventually
get fixed with the clang-9 release.
In the meantime, the best idea I have is to turn off asan-stack for
clang-8 and earlier, so we can produce a kernel that is safe to run.
I have posted three patches that address the frame overflow warnings
that are not addressed by turning off asan-stack, so in combination with
this change, we get much closer to a clean allmodconfig build, which in
turn is necessary to do meaningful build regression testing.
It is still possible to turn on the CONFIG_ASAN_STACK option on all
versions of clang, and it's always enabled for gcc, but when
CONFIG_COMPILE_TEST is set, the option remains invisible, so
allmodconfig and randconfig builds (which are normally done with a
forced CONFIG_COMPILE_TEST) will still result in a mostly clean build.
Link: http://lkml.kernel.org/r/20190222222950.3997333-1-arnd@arndb.de
Link: https://bugs.llvm.org/show_bug.cgi?id=38809
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Qian Cai <cai@lca.pw>
Reviewed-by: Mark Brown <broonie@kernel.org>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kostya Serebryany <kcc@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=TtJZ
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2019-03-01' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Three final fixes, one for a feature that is new in this kernel, one
bochs fix for qemu riscv and one atomic modesetting fix.
I've left a few of the other late fixes until next as I didn't want to
throw in anything that wasn't really necessary"
* tag 'drm-fixes-2019-03-01' of git://anongit.freedesktop.org/drm/drm:
drm/bochs: Fix the ID mismatch error
drm: Block fb changes for async plane updates
drm/amd/display: Use vrr friendly pageflip throttling in DC.
The dasd_eckd_restore_device() function calls dasd_generic_read_dev_chars
with a temporary buffer on the stack. With CONFIG_VMAP_STACK=y this is
a vmalloc address but dasd_generic_restore_device() uses the address of
the buffer as I/O address. Circumvent this by using the already allocated
cqr->data buffer for the RDC data.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The reset of the prefix to zero in swsusp_arch_resume uses a 4 byte stack
slot. With CONFIG_VMAP_STACK=y this is now in the vmalloc area, this works
only with DAT enabled. Move the DAT disable in swsusp_arch_resume after
the prefix reset.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In bpf/syscall.c, map_create() first set map->usercnt to 1, a file
descriptor is supposed to return to userspace. When bpf_map_new_fd()
fails, drop the refcount.
Fixes: bd5f5f4ecb ("bpf: Add BPF_MAP_GET_FD_BY_ID")
Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Merge the ipv4 and ipv6 nat chain type. This is the last
missing piece which allows to provide inet family support
for nat in a follow patch.
The kconfig knobs for ipv4/ipv6 nat chain are removed, the
nat chain type will be built unconditionally if NFT_NAT
expression is enabled.
Before:
text data bss dec hex filename
1576 896 0 2472 9a8 nft_chain_nat_ipv4.ko
1697 896 0 2593 a21 nft_chain_nat_ipv6.ko
After:
text data bss dec hex filename
1832 896 0 2728 aa8 nft_chain_nat.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The family specific masq modules are way too small to warrant
an extra module, just place all of them in nft_masq.
before:
text data bss dec hex filename
1001 832 0 1833 729 nft_masq.ko
766 896 0 1662 67e nft_masq_ipv4.ko
764 896 0 1660 67c nft_masq_ipv6.ko
after:
2010 960 0 2970 b9a nft_masq.ko
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
before:
text data bss dec hex filename
990 832 0 1822 71e nft_redir.ko
697 896 0 1593 639 nft_redir_ipv4.ko
713 896 0 1609 649 nft_redir_ipv6.ko
after:
text data bss dec hex filename
1910 960 0 2870 b36 nft_redir.ko
size is reduced, all helpers from nft_redir.ko can be made static.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use struct device_attribute instead of struct idletimer_tg_attr, and
the correct callback function type to avoid indirect call mismatches
with Control Flow Integrity checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
CONNTRACK_LOCKS is divisor when computer array index, if it is power of
2, compiler will optimize modulo operation as bitwise AND, or else
modulo will lower performance.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Check the result of dereferencing base_chain->stats, instead of result
of this_cpu_ptr with NULL.
base_chain->stats maybe be changed to NULL when a chain is updated and a
new NULL counter can be attached.
And we do not need to check returning of this_cpu_ptr since
base_chain->stats is from percpu allocator if it is non-NULL,
this_cpu_ptr returns a valid value.
And fix two sparse error by replacing rcu_access_pointer and
rcu_dereference with READ_ONCE under rcu_read_lock.
Thanks for Eric's help to finish this patch.
Fixes: 009240940e ("netfilter: nf_tables: don't assume chain stats are set when jumplabel is set")
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Followup to a173f066c7 ("netfilter: bridge: Don't sabotage nf_hook
calls from an l3mdev"). Some packets (e.g., ndisc) do not have the skb
device flipped to the l3mdev (e.g., VRF) device. Update ip_sabotage_in
to not drop packets for slave devices too. Currently, neighbor
solicitation packets for 'dev -> bridge (addr) -> vrf' setups are getting
dropped. This patch enables IPv6 communications for bridges with an
address that are enslaved to a VRF.
Fixes: 73e20b761a ("net: vrf: Add support for PREROUTING rules on vrf device")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
sctp_csum_check() is called by sctp_s/dnat_handler() where it calls
skb_make_writable() to ensure sctphdr to be linearized.
So there's no need to get sctphdr by calling skb_header_pointer()
in sctp_csum_check().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The proto in struct xt_match and struct xt_target is u16, when
calling xt_check_target/match, their proto argument is u8,
and will cause truncation, it is harmless to ip packet, since
ip proto is u8
if a etable's match/target has proto that is u16, will cause
the check failure.
and convert be16 to short in bridge/netfilter/ebtables.c
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The metadata_dst does not initialize the dst_cache field, this causes
problems to ip_md_tunnel_xmit() since it cannot use this cache, hence,
Triggering a route lookup for every packet.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
TCP resets cause instant transition from established to closed state
provided the reset is in-window. Endpoints that implement RFC 5961
require resets to match the next expected sequence number.
RST segments that are in-window (but that do not match RCV.NXT) are
ignored, and a "challenge ACK" is sent back.
Main problem for conntrack is that its a middlebox, i.e. whereas an end
host might have ACK'd SEQ (and would thus accept an RST with this
sequence number), conntrack might not have seen this ACK (yet).
Therefore we can't simply flag RSTs with non-exact match as invalid.
This updates RST processing as follows:
1. If the connection is in a state other than ESTABLISHED, nothing is
changed, RST is subject to normal in-window check.
2. If the RSTs sequence number either matches exactly RCV.NXT,
connection state moves to CLOSE.
3. The same applies if the RST sequence number aligns with a previous
packet in the same direction.
In all other cases, the connection remains in ESTABLISHED state.
If the normal-in-window check passes, the timeout will be lowered
to that of CLOSE.
If the peer sends a challenge ack, connection timeout will be reset.
If the challenge ACK triggers another RST (RST was valid after all),
this 2nd RST will match expected sequence and conntrack state changes to
CLOSE.
If no challenge ACK is received, the connection will time out after
CLOSE seconds (10 seconds by default), just like without this patch.
Packetdrill test case:
0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
0.000 bind(3, ..., ...) = 0
0.000 listen(3, 1) = 0
0.100 < S 0:0(0) win 32792 <mss 1460,sackOK,nop,nop,nop,wscale 7>
0.100 > S. 0:0(0) ack 1 win 64240 <mss 1460,nop,nop,sackOK,nop,wscale 7>
0.200 < . 1:1(0) ack 1 win 257
0.200 accept(3, ..., ...) = 4
// Receive a segment.
0.210 < P. 1:1001(1000) ack 1 win 46
0.210 > . 1:1(0) ack 1001
// Application writes 1000 bytes.
0.250 write(4, ..., 1000) = 1000
0.250 > P. 1:1001(1000) ack 1001
// First reset, old sequence. Conntrack (correctly) considers this
// invalid due to failed window validation (regardless of this patch).
0.260 < R 2:2(0) ack 1001 win 260
// 2nd reset, but too far ahead sequence. Same: correctly handled
// as invalid.
0.270 < R 99990001:99990001(0) ack 1001 win 260
// in-window, but not exact sequence.
// Current Linux kernels might reply with a challenge ack, and do not
// remove connection.
// Without this patch, conntrack state moves to CLOSE.
// With patch, timeout is lowered like CLOSE, but connection stays
// in ESTABLISHED state.
0.280 < R 1010:1010(0) ack 1001 win 260
// Expect challenge ACK
0.281 > . 1001:1001(0) ack 1001 win 501
// With or without this patch, RST will cause connection
// to move to CLOSE (sequence number matches)
// 0.282 < R 1001:1001(0) ack 1001 win 260
// ACK
0.300 < . 1001:1001(0) ack 1001 win 257
// more data could be exchanged here, connection
// is still established
// Client closes the connection.
0.610 < F. 1001:1001(0) ack 1001 win 260
0.650 > . 1001:1001(0) ack 1002
// Close the connection without reading outstanding data
0.700 close(4) = 0
// so one more reset. Will be deemed acceptable with patch as well:
// connection is already closing.
0.701 > R. 1001:1001(0) ack 1002 win 501
// End packetdrill test case.
With patch, this generates following conntrack events:
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 120 FIN_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 60 CLOSE_WAIT src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5437 dport=80 [ASSURED]
Without patch, first RST moves connection to close, whereas socket state
does not change until FIN is received.
[NEW] 120 SYN_SENT src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [UNREPLIED]
[UPDATE] 60 SYN_RECV src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80
[UPDATE] 432000 ESTABLISHED src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
[UPDATE] 10 CLOSE src=10.0.2.1 dst=10.0.0.1 sport=5141 dport=80 [ASSURED]
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Change the data type of the following variables from int to bool
across ipvs code:
- found
- loop
- need_full_dest
- need_full_svc
- payload_csum
Also change the following functions to use bool full_entry param
instead of int:
- ip_vs_genl_parse_dest()
- ip_vs_genl_parse_service()
This patch does not change any functionality but makes the source
code slightly easier to read.
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The original purpose of the code I fix is to replace max_discard with
max_trim if max_trim is less than max_discard. When max_discard is 0
we should replace max_discard with max_trim as well, because
max_discard equals 0 happens only when the max_do_calc_max_discard
process is overflowed, so if mmc_can_trim(card) is true, max_discard
should be replaced by an available max_trim.
However, in the original code, there are two lines of code interfere
the right process.
1) if (max_discard && mmc_can_trim(card))
when max_discard is 0, it skips the process checking if max_discard
needs to be replaced with max_trim.
2) if (max_trim < max_discard)
the condition is false when max_discard is 0. it also skips the process
that replaces max_discard with max_trim, in fact, we should replace the
0-valued max_discard with max_trim.
Signed-off-by: Jiong Wu <Lohengrin1024@gmail.com>
Fixes: b305882fbc (mmc: core: optimize mmc_calc_max_discard)
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add a warning about removing required architecture level set facilities
via "facilities=" command line option.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add "facilities=" command line option which allows to override
facility bits returned by stfle. The main purpose of that is debugging
aids which allows to test specific kernel behaviour depending on
specific facilities presence. It also affects CPU alternatives.
"facilities=" command line option format is comma separated list of
integer values to be additionally set or cleared (if value is starting
with "!"). Values ranges are also supported. e.g.:
facilities=!130-160,159,167-169
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Facilities list in the lowcore is initially set up by verify_facilities
from als.c and later initializations are redundant, so cleaning them up.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Reuse __stfle call instead of in-place implementation. __stfle is using
memcpy and memset functions but they are safe to use, since mem.S is
built with -march=z900.
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Andrii Nakryiko says:
====================
This patchset fixes a bug in btf_dedup() algorithm, which under specific
hash collision causes infinite loop. It also exposes ability to tune BTF
deduplication table size, with double purpose of allowing applications to
adjust size according to the size of BTF data, as well as allowing a simple
way to force hash collisions by setting table size to 1.
- Patch #1 fixes bug in btf_dedup testing code that's checking strings
- Patch #2 fixes pointer arg formatting in btf.h
- Patch #3 adds option to specify custom dedup table size
- Patch #4 fixes aforementioned bug in btf_dedup
- Patch #5 adds test that validates the fix
v1->v2:
- remove "Fixes" from formatting change patch
- extract roundup_pow2_max func for dedup table size
- btf_equal_struct -> btf_shallow_equal_struct
- explain in comment why we can't rely on just btf_dedup_is_equiv
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds a btf_dedup test exercising logic of STRUCT<->FWD
resolution and validating that STRUCT is not resolved to a FWD. It also
forces hash collisions, forcing both FWD and STRUCT to be candidates for
each other. Previously this condition caused infinite loop due to FWD
pointing to STRUCT and STRUCT pointing to its FWD.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
When checking available canonical candidates for struct/union algorithm
utilizes btf_dedup_is_equiv to determine if candidate is suitable. This
check is not enough when candidate is corresponding FWD for that
struct/union, because according to equivalence logic they are
equivalent. When it so happens that FWD and STRUCT/UNION end in hashing
to the same bucket, it's possible to create remapping loop from FWD to
STRUCT and STRUCT to same FWD, which will cause btf_dedup() to loop
forever.
This patch fixes the issue by additionally checking that type and
canonical candidate are strictly equal (utilizing btf_equal_struct).
Fixes: d5caef5b56 ("btf: add BTF types deduplication algorithm")
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Default size of dedup table (16k) is good enough for most binaries, even
typical vmlinux images. But there are cases of binaries with huge amount
of BTF types (e.g., allyesconfig variants of kernel), which benefit from
having bigger dedup table size to lower amount of unnecessary hash
collisions. Tools like pahole, thus, can tune this parameter to reach
optimal performance.
This change also serves double purpose of allowing tests to force hash
collisions to test some corner cases, used in follow up patch.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Fix invalid formatting of pointer arg.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
btf_dedup testing code doesn't account for length of struct btf_header
when calculating the start of a string section. This patch fixes this
problem.
Fixes: 49b57e0d01 ("tools/bpf: remove btf__get_strings() superseded by raw data API")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The "ref_type_id" variable needs to be signed for the error handling
to work.
Fixes: d5caef5b56 ("btf: add BTF types deduplication algorithm")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Jakub Kicinski says:
====================
This set is next part of a quest to get rid of the bpf_load
ELF loader. It fixes some minor issues with the samples and
starts the conversion.
First patch fixes ping invocations, ping localhost defaults
to IPv6 on modern setups. Next load_sock_ops sample is removed
and users are directed towards using bpftool directly.
Patch 4 removes the use of bpf_load from samples which don't
need the auto-attachment functionality at all.
Patch 5 improves symbol counting in libbpf, it's not currently
an issue but it will be when anyone adds a symbol with a long
name. Let's make sure that person doesn't have to spend time
scratching their head and wondering why .a and .so symbol
counts don't match.
v2: - specify prog_type where possible (Andrii).
====================
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
readelf truncates its output by default to attempt to make it more
readable. This can lead to function names getting aliased if they
differ late in the string. Use --wide parameter to avoid
truncation.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Some samples don't really need the magic of bpf_load,
switch them to libbpf.
v2: - specify program types.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
For historical reasons the helper to loop over maps in an object
is called bpf_map__for_each while it really should be called
bpf_object__for_each_map. Rename and add a correctly named
define for backward compatibility.
Switch all in-tree users to the correct name (Quentin).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpftool can do all the things load_sock_ops used to do, and more.
Point users to bpftool instead of maintaining this sample utility.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
ping localhost may default of IPv6 on modern systems, but
samples are trying to only parse IPv4. Force IPv4.
samples/bpf/tracex1_user.c doesn't interpret the packet so
we don't care which IP version will be used there.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Older GCC (<4.8) isn't smart enough to optimize !__builtin_constant_p()
branch in bpf_htons.
I recently fixed it for pkt_v4 and pkt_v6 in commit a0517a0f7e
("selftests/bpf: use __bpf_constant_htons in test_prog.c"), but
later added another bunch of bpf_htons in commit bf0f0fd939
("selftests/bpf: add simple BPF_PROG_TEST_RUN examples for flow
dissector").
Fixes: bf0f0fd939 ("selftests/bpf: add simple BPF_PROG_TEST_RUN examples for flow dissector")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This header defines the BPF functions enumerated in uapi/linux.bpf.h
in a callable format. Expand to include all registered functions.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
wrap bpf_stats_enabled sysctl with #ifdef
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: 492ecee892 ("bpf: enable program stats")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
- Fix 16b cmpxchg() operations which could erroneously fail if bits 15:8
of the old value are non-zero. In practice I'm not aware of any actual
users of 16b cmpxchg() on MIPS, but this fixes the support for it was
was introduced in v4.13.
- Provide a struct device to dma_alloc_coherent for Lantiq XWAY systems
with a "Voice MIPS Macro Core" (VMMC) device.
- Provide DMA masks for BCM63xx ethernet devices, fixing a regression
introduced in v4.19.
- Fix memblock reservation for the kernel when the system has a non-zero
PHYS_OFFSET, correcting the memblock conversion performed in v4.20.
-----BEGIN PGP SIGNATURE-----
iIsEABYIADMWIQRgLjeFAZEXQzy86/s+p5+stXUA3QUCXHhqjBUccGF1bC5idXJ0
b25AbWlwcy5jb20ACgkQPqefrLV1AN3ZaAD/SFgi3dS9bSWhDhiy83llLaWiCGPb
i09uzo3rpWoKSwQBAIwLEfmaHz/sYdliKRlE13uaxYWzwaN+VHXIPjlzbYMB
=cDlO
-----END PGP SIGNATURE-----
Merge tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Paul Burton:
"A few more MIPS fixes:
- Fix 16b cmpxchg() operations which could erroneously fail if bits
15:8 of the old value are non-zero. In practice I'm not aware of
any actual users of 16b cmpxchg() on MIPS, but this fixes the
support for it was was introduced in v4.13.
- Provide a struct device to dma_alloc_coherent for Lantiq XWAY
systems with a "Voice MIPS Macro Core" (VMMC) device.
- Provide DMA masks for BCM63xx ethernet devices, fixing a regression
introduced in v4.19.
- Fix memblock reservation for the kernel when the system has a
non-zero PHYS_OFFSET, correcting the memblock conversion performed
in v4.20"
* tag 'mips_fixes_5.0_4' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: fix memory setup for platforms with PHYS_OFFSET != 0
MIPS: BCM63XX: provide DMA masks for ethernet devices
MIPS: lantiq: pass struct device to DMA API functions
MIPS: fix truncation in __cmpxchg_small for short values
