Commit Graph

7 Commits

Author SHA1 Message Date
Philippe Schenker
24ffaa23ce ARM: dts: imx6-apalis: Add touchscreens used on Toradex eval boards
This commit adds the touchscreen from Toradex so one can enable it.
It is disabled by default because the pins are also used for PWM<B>,
PWM<C>, aka pwm2, pwm3 which is the standard use for colibri boards.

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-10-02 09:09:50 +08:00
Stefan Agner
78f10734f9 ARM: dts: imx6q-apalis: mux RESET_MOCI# signal
The pinctrl properties on the IOMUXC node get overwritten by the
carrier board level device tree, hence the pinctrl_reset_moci
pinctrl does not get applied.

Associate the pinctrl_reset_moci pinctrl with the PCIe node where
we also make use of the pin as a reset GPIO.

Since the pin is muxed as a GPIO by default not muxing it explicitly
worked fine in practise.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-09-10 09:08:57 +08:00
Stefan Agner
5780acda81 ARM: dts: imx6q-apalis-eval: add carrier board 3.3V supply
Add the 3.3V main supply on the carrier board. Currently as a fixed
supply since not all consumer are modeled yet. This gets also rid of
some missing supply warnings.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-11 21:00:42 +08:00
Stefan Agner
6c74366b8d ARM: dts: imx6q-apalis: add chosen node
Add Apalis UART1 as default serial console.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2018-07-11 21:00:27 +08:00
Stefan Agner
c53bec16b1 ARM: dts: colibri/apalis: use correct compatible for RTC
All Toradex Carrier Boards use a st,m41t0 compatible RTC. Compared
to a st,m41t00 this RTC has also an oscillator fail bit which allows
to detect when the RTC lost track of time.

Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-12-26 16:15:44 +08:00
Marco Franchi
792d4edda0 ARM: dts: imx: Fix incorrect display nodes notation
The following build warnings are seen with W=1:

Warning (unit_address_vs_reg): Node /display@di0 has a unit name, but no reg property
Warning (unit_address_vs_reg): Node /display@di1 has a unit name, but no reg property

Fix all these warnings by changing 'display@diX' to 'dispX'.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-10-13 15:58:24 +08:00
Sanchayan Maity
c6a9f13819 ARM: dts: imx6q-apalis-eval: add support for Apalis Evaluation Board
Add support for the Toradex Apalis Evaluation Board.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-08-14 09:29:43 +08:00