CPUCFG is the instruction for querying processor characteristics on
newer Loongson processors, much like CPUID of x86. Since the instruction
is supposedly designed to provide a unified way to do feature detection
(without having to, for example, parse /proc/cpuinfo which is too
heavyweight), it is important to provide compatibility for older cores
without native support. Fortunately, most of the fields can be
synthesized without changes to semantics. Performance is not really big
a concern, because feature detection logic is not expected to be
invoked very often in typical userland applications.
The instruction can't be emulated on LOONGSON_2EF cores, according to
FlyGoat's experiments. Because the LWC2 opcode is assigned to other
valid instructions on 2E and 2F, no RI exception is raised for us to
intercept. So compatibility is only extended back furthest to
Loongson-3A1000. Loongson-2K is covered too, as it is basically a remix
of various blocks from the 3A/3B models from a kernel perspective.
This is lightly based on Loongson's work on their Linux 3.10 fork, for
being the authority on the right feature flags to fill in, where things
aren't otherwise discoverable.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CP0.Config6 is a Vendor-defined register whose bits definitions are
different from one to another. Recently, Xuerui's Loongson-3 patch and
Serge's P5600 patch make the definitions inconsistency and unclear.
To make life easy, this patch tidy the definition up:
1, Add a _MTI_ infix for proAptiv/P5600 feature bits;
2, Add a _LOONGSON_ infix for Loongson-3 feature bits;
3, Add bit6/bit7 definition for Loongson-3 which will be used later.
All existing users of these macros are updated.
Cc: WANG Xuerui <git@xen0n.name>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add config check in Makefile to only build the subdir of current platform.
E.g. without this patch:
AR arch/mips/built-in.a
AR arch/mips/boot/dts/brcm/built-in.a
AR arch/mips/boot/dts/cavium-octeon/built-in.a
AR arch/mips/boot/dts/img/built-in.a
AR arch/mips/boot/dts/ingenic/built-in.a
AR arch/mips/boot/dts/lantiq/built-in.a
DTC arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb
DTB arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.S
AS arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.o
DTC arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb
DTB arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.S
AS arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.o
AR arch/mips/boot/dts/loongson/built-in.a
AR arch/mips/boot/dts/mscc/built-in.a
AR arch/mips/boot/dts/mti/built-in.a
AR arch/mips/boot/dts/netlogic/built-in.a
AR arch/mips/boot/dts/ni/built-in.a
AR arch/mips/boot/dts/pic32/built-in.a
AR arch/mips/boot/dts/qca/built-in.a
AR arch/mips/boot/dts/ralink/built-in.a
AR arch/mips/boot/dts/xilfpga/built-in.a
AR arch/mips/boot/dts/built-in.a
With this patch:
AR arch/mips/built-in.a
DTC arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb
DTB arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.S
AS arch/mips/boot/dts/loongson/loongson3_4core_rs780e.dtb.o
DTC arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb
DTB arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.S
AS arch/mips/boot/dts/loongson/loongson3_8core_rs780e.dtb.o
AR arch/mips/boot/dts/loongson/built-in.a
AR arch/mips/boot/dts/built-in.a
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The exception handler subroutines are declared as a single char, but
when copied to the required addresses the copy length is 0x80.
When range checks are enabled for memcpy() this results in a build
failure, with error messages such as:
In file included from arch/mips/mti-malta/malta-init.c:15:
In function 'memcpy',
inlined from 'mips_nmi_setup' at arch/mips/mti-malta/malta-init.c:98:2:
include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
376 | __read_overflow2();
| ^~~~~~~~~~~~~~~~~~
Change the declarations to use type char[].
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: YunQiang Su <syq@debian.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Due to being embedded into the CPU cores MIPS count/compare timer
frequency is changed together with the CPU clocks alteration.
In case if frequency really changes the kernel clockevent framework
must be notified, otherwise the kernel timers won't work correctly.
Fix this by calling clockevents_update_freq() for each r4k clockevent
handlers registered per available CPUs.
Traditionally MIPS r4k-clock are clocked with CPU frequency divided by 2.
But this isn't true for some of the platforms. Due to this we have to save
the basic CPU frequency, so then use it to scale the initial timer
frequency (mips_hpt_frequency) and pass the updated value further to the
clockevent framework.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 07d69579e7 ("MIPS: Don't register r4k sched clock when CPUFREQ
enabled") disabled the r4k-clock usage for scheduler ticks counting due
to the scheduler being non-tolerant for unstable clocks sources. For the
same reason the clock should be used in the system clocksource framework
with care. As soon as CPU frequency changes the clocksource framework
should be notified about this by marking the R4K timer being unstable
(which it really is, since the ticks rate has been changed synchronously
with the CPU frequency).
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Loops-per-jiffies is a special number which represents a number of
noop-loop cycles per CPU-scheduler quantum - jiffies. As you
understand aside from CPU-specific implementation it depends on
the CPU frequency. So when a platform has the CPU frequency fixed,
we have no problem and the current udelay interface will work
just fine. But as soon as CPU-freq driver is enabled and the cores
frequency changes, we'll end up with distorted udelay's. In order
to fix this we have to accordinly adjust the per-CPU udelay_val
(the same as the global loops_per_jiffy) number. This can be done
in the CPU-freq transition event handler. We subscribe to that event
in the MIPS arch time-inititalization method.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
On some platforms IO-memory might require to use a proper load/store
instructions (like Baikal-T1 IO-memory). To fix the cps-vec UART debug
printout let's add the CONFIG_CPS_NS16550_WIDTH config to determine which
instructions lb/sb, lh/sh or lw/sw are required for MMIO operations.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are bit fields which persist in the MIPS CONFIG and CONFIG6
registers, but haven't been described in the generic mipsregs.h
header so far. In particular, the generic CONFIG bitfields are
BE - endian mode, BM - burst mode, SB - SimpleBE, OCP interface mode
indicator, UDI - user-defined "CorExtend" instructions, DSP - data
scratch pad RAM present, ISP - instruction scratch pad RAM present,
etc. The core-specific CONFIG6 bitfields are JRCD - jump register
cache prediction disable, R6 - MIPSr6 extensions enable, IFUPerfCtl -
IFU performance control, SPCD - sleep state performance counter, DLSB -
disable load/store bonding. A new exception code reported in the
ExcCode field of the Cause register: 30 - Parity/ECC error exception
happened on either fetch, load or cache refill. Lets add them to the
mipsregs.h header to be used in future platform code, which have them
utilized.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CP0 config register may indicate whether write-through merging
is allowed. Currently there are two types of the merging available:
SysAD Valid and Full modes. Whether each of them are supported by
the core is implementation dependent. Moreover whether the ability
to change the mode also depends on the chip family instance. Taking
into account all of this we created a dedicated mm_config() method
to detect and enable merging if it's supported. It is called for
MIPS-type processors at CPU-probe stage and attempts to detect whether
the write merging is available. If it's known to be supported and
switchable, then switch on the full mode. Otherwise just perform the
CP0.Config.MM field analysis.
In addition there are platforms like InterAptiv/ProAptiv, which do have
the MM bit field set by default, but having write-through cacheing
unsupported makes write-merging also unsupported. In this case we just
ignore the MM field value.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 1aeba347b3 ("MIPS: Hardcode cpu_has_mips* where target ISA
allows") updated the cpu_has_mips* macro to be replaced with a constant
expression where it's possible. By mistake it wasn't done correctly
for cpu_has_mips64r1/cpu_has_mips64r2 macro. They are defined to
be replaced with conditional expression __isa_range_or_flag(), which
means either ISA revision being within the range or the corresponding
CPU options flag was set at the probe stage or both being true at the
same time. But the ISA level value doesn't indicate whether the ISA is
MIPS32 or MIPS64. Due to this if we select MIPS32r1 - MIPS32r5
architectures the __isa_range() macro will activate the
cpu_has_mips64rX flags, which is incorrect. In order to fix the
problem we make sure the 64bits CPU support is enabled by means of
checking the flag cpu_has_64bits aside with proper ISA range and specific
Revision flag being set.
Fixes: 1aeba347b3 ("MIPS: Hardcode cpu_has_mips* where target ISA allows")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This is a MIPS32 Release 5 based IP core with XPA, EVA, dual/quad issue
exec pipes, MMU with two-levels TLB, UCA, MSA, MDU core level features
and system level features like up to six P5600 calculation cores, CM2
with L2 cache, IOCU/IOMMU (though might be unused depending on the
system-specific IP core configuration), GIC, CPC, virtualisation module,
eJTAG and PDtrace.
As being MIPS32 Release 5 based core it provides all the features
available by the CPU_MIPS32_R5 config, while adding a few more like
UCA attribute support, availability of CPU-freq (by means of L2/CM
clock ratio setting), EI/VI GIC modes detection at runtime.
In addition to this if P5600 architecture is enabled modern GNU GCC
provides a specific tuning for P5600 processors with respect to the
classic MIPS32 Release 5. First of all branch-likely avoidance is
activated only when the code is compiled with the speed optimization
(avoidance is always enabled for the pure MIPS32 Release 5
architecture). Secondly the madd/msub avoidance is enabled since
madd/msub utilization isn't profitable due to overhead of getting the
result out of the HI/LO registers. Multiply-accumulate instructions are
activated and utilized together with the necessary code reorder when
multiply-add/multiply-subtract statements are met. Finally load/store
bonding is activated by default. All of these optimizations may make
the code relatively faster than if just MIP32 release 5 architecture
was requested.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are five MIPS32/64 architecture releases currently available:
from 1 to 6 except fourth one, which was intentionally skipped.
Three of them can be called as major: 1st, 2nd and 6th, that not only
have some system level alterations, but also introduced significant
core/ISA level updates. The rest of the MIPS architecture releases are
minor.
Even though they don't have as much ISA/system/core level changes
as the major ones with respect to the previous releases, they still
provide a set of updates (I'd say they were intended to be the
intermediate releases before a major one) that might be useful for the
kernel and user-level code, when activated by the kernel or compiler.
In particular the following features were introduced or ended up being
available at/after MIPS32/64 Release 5 architecture:
+ the last release of the misaligned memory access instructions,
+ virtualisation - VZ ASE - is optional component of the arch,
+ SIMD - MSA ASE - is optional component of the arch,
+ DSP ASE is optional component of the arch,
+ CP0.Status.FR=1 for CP1.FIR.F64=1 (pure 64-bit FPU general registers)
must be available if FPU is implemented,
+ CP1.FIR.Has2008 support is required so CP1.FCSR.{ABS2008,NAN2008} bits
are available.
+ UFR/UNFR aliases to access CP0.Status.FR from user-space by means of
ctc1/cfc1 instructions (enabled by CP0.Config5.UFR),
+ CP0.COnfig5.LLB=1 and eretnc instruction are implemented to without
accidentally clearing LL-bit when returning from an interrupt,
exception, or error trap,
+ XPA feature together with extended versions of CPx registers is
introduced, which needs to have mfhc0/mthc0 instructions available.
So due to these changes GNU GCC provides an extended instructions set
support for MIPS32/64 Release 5 by default like eretnc/mfhc0/mthc0. Even
though the architecture alteration isn't that big, it still worth to be
taken into account by the kernel software. Finally we can't deny that
some optimization/limitations might be found in future and implemented
on some level in kernel or compiler. In this case having even
intermediate MIPS architecture releases support would be more than
useful.
So the most of the changes provided by this commit can be split into
either compile- or runtime configs related. The compile-time related
changes are caused by adding the new CONFIG_CPU_MIPS32_R5/CONFIG_CPU_MIPSR5
configs and concern the code activating MIPSR2 or MIPSR6 already
implemented features (like eretnc/LLbit, mthc0/mfhc0). In addition
CPU_HAS_MSA can be now freely enabled for MIPS32/64 release 5 based
platforms as this is done for CPU_MIPS32_R6 CPUs. The runtime changes
concerns the features which are handled with respect to the MIPS ISA
revision detected at run-time by means of CP0.Config.{AT,AR} bits. Alas
these fields can be used to detect either r1 or r2 or r6 releases.
But since we know which CPUs in fact support the R5 arch, we can manually
set MIPS_CPU_ISA_M32R5/MIPS_CPU_ISA_M64R5 bit of c->isa_level and then
use cpu_has_mips32r5/cpu_has_mips64r5 where it's appropriate.
Since XPA/EVA provide too complex alterationss and to have them used with
MIPS32 Release 2 charged kernels (for compatibility with current platform
configs) they are left to be setup as a separate kernel configs.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Indeed according to the MIPS32 Privileged Resource Architecgture the MAAR
pair register address field either takes [12:31] bits for non-XPA systems
and [12:55] otherwise. In any case the current address mask is just
wrong for 64-bit and 32-bits XPA chips. So lets extend it to 59-bits
of physical address value. This shall cover the 64-bits architecture and
systems with XPA enabled, and won't cause any problem for non-XPA 32-bit
systems, since address values exceeding the architecture specific MAAR
mask will be just truncated with setting zeros in the unsupported upper
bits.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit f5ff0a2802 ("[MIPS] Use generic NTP code for all MIPS
platforms"), TICK_SIZE is not used in ip27-timer.c for many years,
remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add missing include which adds the prototype to plat_time_init().
Fixes: f932449c11 ("MIPS: ingenic: Drop obsolete code, merge the rest in setup.c")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 0ce5ebd24d ("mfd: ioc3: Add driver for SGI IOC3 chip"),
the related includes and comment about ioc3 are not used any more in
ip27-timer.c, remove them.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When XPA mode is enabled the normally 32-bits MAAR pair registers
are extended to be of 64-bits width as in pure 64-bits MIPS
architecture. In this case the MAAR registers can enable the
speculative loads/stores for addresses of up to 39-bits width.
But in this case the process of the MAAR initialization changes a bit.
The upper 32-bits of the registers are supposed to be accessed by mean
of the dedicated instructions mfhc0/mthc0 and there is a CP0.MAAR.VH
bit which should be set together with CP0.MAAR.VL as indication
of the boundary validity. All of these peculiarities were taken into
account in this commit so the speculative loads/stores would work
when XPA mode is enabled.
Co-developed-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-pm@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The parameter "cmdline_p" is useless in bootcmdline_init()，remove it.
Signed-off-by: Zhi Li <lizhi01@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 9d0aaf98dc ("MIPS: SGI-IP27: Move all shared IP27
declarations to ip27-common.h"), ip27-common.h is included more
than once in ip27-timer.c, remove it.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove an old macro that no longer exists anywhere else in the tree
that snuck in when IP30 support was added
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 87fcfa7b7f ("MIPS: Loongson64: Add generic dts"),
there already exists the node and property of Loongson CPU UART0
in loongson3-package.dtsi:
cpu_uart0: serial@1fe001e0 {
compatible = "ns16550a";
reg = <0 0x1fe001e0 0x8>;
clock-frequency = <33000000>;
interrupt-parent = <&liointc>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
no-loopback-test;
};
In order to support for serial console on the Loongson platform,
add CONFIG_SERIAL_OF_PLATFORM=y to loongson3_defconfig.
With this patch, we can see the following boot messages:
[ 1.877745] printk: console [ttyS0] disabled
[ 1.881979] 1fe001e0.serial: ttyS0 at MMIO 0x1fe001e0 (irq = 16, base_baud = 2062500) is a 16550A
[ 1.890838] printk: console [ttyS0] enabled
And also, we can login normally from the serial console.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
User space checkpoint and restart tool (CRIU) needs the page's change
to be soft tracked. This allows to do a pre checkpoint and then dump
only touched pages.
Signed-off-by: Guoyun Sun <sunguoyun@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
These are exposed to userland alternatively via the new CPUCFG
instruction on Loongson-3A R4 and above. Add definitions for readback
on older cores.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the constants for easier and maintainable composition of CPUCFG
values.
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix some symbol names to align with Loongson's User Manual wording. Also
correct the comment in csr_readq() suggesting the wrong instruction in
use.
Fixes: 6a6f9b7daf ("MIPS: Loongson: Add CFUCFG&CSR support")
Signed-off-by: WANG Xuerui <git@xen0n.name>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When CONFIG_HAVE_STD_PC_SERIAL_PORT is set, there exists build errors
of 8250-platform.c due to linux/module.h is not included.
CONFIG_HAVE_STD_PC_SERIAL_PORT is not used in arch/mips for many years,
8250-platform.c is also not built and used, so it is not necessary to
fix the build errors, just remove the not used file 8250-platform.c and
the related code in Kconfig and Makefile.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When ATI Radeon GPU driver has been compiled directly into the kernel
instead of as a module, we should make sure the firmware for the model
(check available ones in /lib/firmware/radeon) is built-in to the kernel
as well, otherwise there exists the following fatal error during GPU init,
change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it.
[ 1.900997] [drm] Loading RS780 Microcode
[ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2
[ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin"
[ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware!
[ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init
[ 1.931729] [drm] radeon: finishing device.
Fixes: 024e6a8b5b ("MIPS: Loongson: Add a Loongson-3 default config file")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
schema violation was detected by the dtbs_check
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fit led nodes to the latest naming schema.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The attached patch wraps several of the macros in IP27's spaces.h
header file with the _AC() macro. This matches most of the other
spaces.h files in the MIPS tree.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With the change of platform file inclusion object were included via
platform-y and core-y. Remove the core-y part to fix it.
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Changing inclusion of Platform files, broke VR41xx platforms. Add Makefile
to vr41xx directory and traverse subdirs from it.
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the following coccicheck warning:
arch/mips/kvm/tlb.c:472:2-3: Unneeded semicolon
arch/mips/kvm/tlb.c:489:2-3: Unneeded semicolon
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the following coccicheck warning:
arch/mips/kvm/mips.c:82:1-28: WARNING: Assignment of 0/1 to bool
variable
arch/mips/kvm/mips.c:88:1-28: WARNING: Assignment of 0/1 to bool
variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This is an add-on patch to the main SoC Sparx5 series
(Message-ID: <20200513125532.24585-1-lars.povlsen@microchip.com>).
This changes the miim pinctrl function name from "miim1" to "miim" due
to refactoring in the driver, obsoleting the instance number.
The change in the driver was to better fit new platforms, as the
instance number is redundant information. Specifically, support for
the Microchip Sparx5 SoC is being submitted, where this change became
necessary.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 26bff9eb49 ("MIPS: Only include the platformfile needed")
moves platform-(CONFIG_XYZ) from arch/mips/xyz/Platform to arch/mips/
Kbuild.platforms. This change causes an error when "make clean":
./scripts/Makefile.clean:15: arch/mips/vr41xx/Makefile: No such file or directory
make[3]: *** No rule to make target `arch/mips/vr41xx/Makefile'. Stop.
make[2]: *** [arch/mips/vr41xx] Error 2
make[1]: *** [_clean_arch/mips] Error 2
make: *** [sub-make] Error 2
Clean-files are defined in arch/mips/Kbuild:
obj- := $(platform-)
Due to the movement of platform-(CONFIG_XYZ), "make clean" will enter
arch/mips/vr41xx/ whether CONFIG_MACH_VR41XX is defined or not. Because
there is no Makefile in arch/mips/vr41xx/, "make clean" fails. I don't
know what is the best way to fix it, but it seems like we can avoid this
error by changing the obj- definition:
obj- := $(platform-y)
Fixes: 26bff9eb49 ("MIPS: Only include the platformfile needed")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 26bff9eb49 ("MIPS: Only include the platform file needed")
misspelled "txx9" to "tx99", so fix it.
Fixes: 26bff9eb49 ("MIPS: Only include the platform file needed")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Instead of including all Platform files, we simply include the
needed one and avoid clashes with makefile variables.
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently, when linking with ld.lld, this warning pops up:
arch/mips/vdso/Makefile:70: MIPS VDSO requires binutils >= 2.25
CONFIG_LD_VERSION is set with scripts/ld-version.sh, which is specific
to GNU ld. It returns 0 for ld.lld so CONFIG_MIPS_LD_CAN_LINK_VDSO does
not set.
ld.lld has a completely different versioning scheme (as it follows
LLVM's versioning) and it does not have the issue mentioned in the
comment block so it should be allowed to link the VDSO.
With this patch, the VDSO successfully links and shows P_MIPS_PC32 in
vgettimeofday.o.
$ llvm-objdump -Dr arch/mips/vdso/vgettimeofday.o | grep R_MIPS_PC32
00000024: R_MIPS_PC32 _start
000000b0: R_MIPS_PC32 _start
000002bc: R_MIPS_PC32 _start
0000036c: R_MIPS_PC32 _start
00000468: R_MIPS_PC32 _start
Reported-by: Dmitry Golovin <dima@golovin.in>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/785
Link: e364e2e9ce
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Currently, the VDSO is being linked through $(CC). This does not match
how the rest of the kernel links objects, which is through the $(LD)
variable.
When clang is built in a default configuration, it first attempts to use
the target triple's default linker then the system's default linker,
unless told otherwise through -fuse-ld=... We do not use -fuse-ld=
because it can be brittle and we have support for invoking $(LD)
directly. See commit fe00e50b2d ("ARM: 8858/1: vdso: use $(LD)
instead of $(CC) to link VDSO") and commit 691efbedc6 ("arm64: vdso:
use $(LD) instead of $(CC) to link VDSO") for examples of doing this in
the VDSO.
Do the same thing here. Replace the custom linking logic with $(cmd_ld)
and ldflags-y so that $(LD) is respected. We need to explicitly add two
flags to the linker that were implicitly passed by the compiler:
-G 0 (which comes from ccflags-vdso) and --eh-frame-hdr.
Before this patch (generated by adding '-v' to VDSO_LDFLAGS):
<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/collect2 \
-plugin <gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/liblto_plugin.so \
-plugin-opt=<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/lto-wrapper \
-plugin-opt=-fresolution=/tmp/ccGEi5Ka.res \
--eh-frame-hdr \
-G 0 \
-EB \
-mips64r2 \
-shared \
-melf64btsmip \
-o arch/mips/vdso/vdso.so.dbg.raw \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0/64 \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0 \
-L<gcc_prefix>/lib/gcc/mips64-linux/9.3.0/../../../../mips64-linux/lib \
-Bsymbolic \
--no-undefined \
-soname=linux-vdso.so.1 \
-EB \
--hash-style=sysv \
--build-id \
-T arch/mips/vdso/vdso.lds \
arch/mips/vdso/elf.o \
arch/mips/vdso/vgettimeofday.o \
arch/mips/vdso/sigreturn.o
After this patch:
<gcc_prefix>/bin/mips64-linux-ld \
-m elf64btsmip \
-Bsymbolic \
--no-undefined \
-soname=linux-vdso.so.1 \
-EB \
-nostdlib \
-shared \
-G 0 \
--eh-frame-hdr \
--hash-style=sysv \
--build-id \
-T arch/mips/vdso/vdso.lds \
arch/mips/vdso/elf.o \
arch/mips/vdso/vgettimeofday.o
arch/mips/vdso/sigreturn.o \
-o arch/mips/vdso/vdso.so.dbg.raw
Note that we leave behind -mips64r2. Turns out that ld ignores it (see
get_emulation in ld/ldmain.c). This is true of current trunk and 2.23,
which is the minimum supported version for the kernel:
https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/ldmain.c;hb=aa4209e7b679afd74a3860ce25659e71cc4847d5#l593https://sourceware.org/git/?p=binutils-gdb.git;a=blob;f=ld/ldmain.c;hb=a55e30b51bc6227d8d41f707654d0a5620978dcf#l641
Before this patch, LD=ld.lld did nothing:
$ llvm-readelf -p.comment arch/mips/vdso/vdso.so.dbg | sed 's/(.*//'
String dump of section '.comment':
[ 0] ClangBuiltLinux clang version 11.0.0
After this patch, it does:
$ llvm-readelf -p.comment arch/mips/vdso/vdso.so.dbg | sed 's/(.*//'
String dump of section '.comment':
[ 0] Linker: LLD 11.0.0
[ 62] ClangBuiltLinux clang version 11.0.0
Link: https://github.com/ClangBuiltLinux/linux/issues/785
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This was all done to work around a GCC bug that has been fixed after
4.2. The kernel requires GCC 4.6 or newer so remove all of these hacks
and just use the traditional flags.
$ mips64-linux-gcc --version | head -n1
mips64-linux-gcc (GCC) 4.6.3
$ mips64-linux-gcc -EB -dM -E -C -x c /dev/null | grep MIPSE
#define MIPSEB 1
#define __MIPSEB__ 1
#define _MIPSEB 1
#define __MIPSEB 1
$ mips64-linux-gcc -EL -dM -E -C -x c /dev/null | grep MIPSE
#define __MIPSEL__ 1
#define MIPSEL 1
#define _MIPSEL 1
#define __MIPSEL 1
This is necessary when converting the MIPS VDSO to use $(LD) instead of
$(CC) to link because the OUTPUT_FORMAT is defaulted to little endian
and only flips to big endian when '-EB' is set on the command line.
There is no issue currently because the compiler explicitly passes
'-EB' or '-EL' to the linker regardless of whether or not it was
provided by the user. Passing '-v' to VDSO_LDFLAGS shows:
<gcc_prefix>/libexec/gcc/mips64-linux/9.3.0/collect2 ... -EB ...
even though '-EB' is nowhere to be found in KBUILD_CFLAGS. The VDSO
Makefile already supports getting '-EB' or '-EL' from KBUILD_CFLAGS
through a filter directive but '-EB' or '-EL' is not always present.
If we do not do this, we will see the following error when compiling
for big endian:
$ make -j$(nproc) ARCH=mips CROSS_COMPILE=mips64-linux- \
64r2el_defconfig arch/mips/vdso/
...
mips64-linux-ld: arch/mips/vdso/elf.o: compiled for a big endian system
and target is little endian
mips64-linux-ld: arch/mips/vdso/elf.o: endianness incompatible with that
of the selected emulation
mips64-linux-ld: failed to merge target specific data of file
arch/mips/vdso/elf.o
...
Remove this legacy hack and just use '-EB' and '-EL' unconditionally.
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After commit 9553d16fa6 ("init/kconfig: Add LD_VERSION Kconfig"), we
have access to GNU ld's version at configuration time. As a result, we
can make it clearer under what configuration circumstances the MIPS VDSO
needs to be disabled.
This is a prerequisite for getting rid of the MIPS VDSO binutils
warning and linking the VDSO when LD is ld.lld. Wrapping the call to
ld-ifversion with CONFIG_LD_IS_LLD does not work because the config
values are wiped away during 'make clean'.
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Similarly to the CC_IS_CLANG config, add LD_IS_LLD to avoid GNU ld
specific logic such as ld-version or ld-ifversion and gain the
ability to select potential features that depend on the linker at
configuration time such as LTO.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
[nc: Reword commit message]
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
__flush_icache_user_range is not used in modular code, so unexport it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
