As usual a number of changes, among which:
- All the sun5i DTSI has been reworked based on the new documentation and
the IPs that are actually found in all those SoCs. Part of that rework
also brought the GR8 DTSI to include sun5i.dtsi
- Mali devfreq and thermal throttling support on the A33
- AC power supplies for the AXP209 and AXP22X PMIC
- CAN support for the A20
- CPUFreq-based thermal throttling for the A33
- New board: NanoPi NEO Air
-----BEGIN PGP SIGNATURE-----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=m9vZ
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt
Allwinner DT changes for 4.12
As usual a number of changes, among which:
- All the sun5i DTSI has been reworked based on the new documentation and
the IPs that are actually found in all those SoCs. Part of that rework
also brought the GR8 DTSI to include sun5i.dtsi
- Mali devfreq and thermal throttling support on the A33
- AC power supplies for the AXP209 and AXP22X PMIC
- CAN support for the A20
- CPUFreq-based thermal throttling for the A33
- New board: NanoPi NEO Air
* tag 'sunxi-dt-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (38 commits)
ARM: sun8i: sina33: add highest OPP of CPUs
ARM: sun8i: a33: Add devfreq-based GPU cooling
ARM: sun8i: a33: add CPU thermal throttling
ARM: sun8i: a33: add thermal sensor
ARM: dts: sun7i: fix device node ordering
ARM: dts: sun4i: fix device node ordering
ARM: dts: sun7i: Add can0_pins_a pinctrl settings
ARM: dts: sun7i: Add CAN node
ARM: dts: sun4i: Add can0_pins_a pinctrl settings
ARM: dts: sun4i: Add CAN node
ARM: sun7i: cubietruck: enable ACIN und USB power supply subnode
ARM: dts: sun5i: Add interrupt for display backend
dt-bindings: display: sun4i: Add display backend interrupt to device tree binding
ARM: dts: sun7i: Use axp209.dtsi on A20-OLinuXino-Micro
ARM: dts: sun6i: sina31s: Enable SPDIF out
ARM: sun8i: sina33: add cpu-supply
ARM: sun8i: a33: add all operating points
ARM: sun5i: chip: enable ACIN power supply subnode
ARM: dts: sun8i: sina33: enable ACIN power supply subnode
ARM: dtsi: axp22x: add AC power supply subnode
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Clean-up:
- Add clock/memory nodes
- Add labels for CPU nodes
- Remove unused unit names and reg
- Remove unused skeleton.dtsi
- Add support for PMU
- Add QSPI for sodia board
- Add Reset controller for Arria10
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EeLo
-----END PGP SIGNATURE-----
Merge tag 'socfpga_dts_for_v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt
SoCFPGA DTS updates for v4.12
- Clean-up:
- Add clock/memory nodes
- Add labels for CPU nodes
- Remove unused unit names and reg
- Remove unused skeleton.dtsi
- Add support for PMU
- Add QSPI for sodia board
- Add Reset controller for Arria10
* tag 'socfpga_dts_for_v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: dts: socfpga: Add Devkit A10-SR Reset Controller
ARM: dts: socfpga: sodia: enable qspi
ARM: dts: socfpga: Add support for PMU
ARM: dts: socfpga: Add labels for CPU nodes
ARM: dts: socfpga: Do not include skeleton.dtsi
ARM: dts: socfpga: Remove unit name for LEDs in EBV SOCrates
ARM: dts: socfpga: Remove unneeded reg from stmpe_touchscreen
ARM: dts: socfpga: Remove unneeded unit names
ARM: dts: socfpga: Add unit name to memory nodes
ARM: dts: socfpga: Add unit name to clock nodes
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
----------
- ADD RTC support on STM32F746 MCU
- Enable RTC on STM32F746 Eval board
- Enable clocks on STM32F746 MCU
- Enable DMA, pwm1 and pwm3 on STM32F429I Eval
- Add support of STM32H743 MCU and his Eval board
- Enable USB HS and FS on STM32F469 Disco board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJY4n6WAAoJEH+ayWryHnCFaXYQAKmOBcBrU2RiZt/tn02lhEJI
/BKTjFUBg9CCSMqT8xJvDtCJ3YLUwxqo4HhkvKnTZh7AQ1mSTdVScKrB0Le83271
IOoAFBmCZCn9ShSgclBPiold1q5i7g/hZRagQwNwXHdQXt8GZxhpVzaYgZj7EtQ4
B5ikmQCT9KagPSiY4M6X1pzRPRmqcN6alAYsIO8SoHrFpBXm8/TWqspn5pPhojIM
4oWbGEwAxLR4J86TA2Eu+Yp/8FvGX8+W59tFbarlBPloKueHADZ72MfrTZ72vXf6
y4s4JGctDOiLqRFBR6Pp3i8/F4d2pxtd7GsWHR12Mw8lQGHHkKZWs20vri+s6HiT
qkjKWXdV4mwYis4vUB997NOYClbqTbURcUt7uRvFrDXD2gg3TnRGkP5WynEX8njS
cnRhJ+1rS3iC2rvNtRGE9aadRRtxXVqVQ1HA2EeBeNGpVgFFPbdhPpt2ZDhC2PLf
FRYQnxxVAngionqxNGytwKTHXSsVYufMINPyUZWxqUXN083+HAWemJCUTd6cC1ia
I781iAjQDWyQzrG8jQtsEXPT2rSdrouVzu0CG642EDuU81CkAWz8vBkrjPj9m+9g
fcd8RhRQTvcz0rePNBq/OLRojA7bVsDBBikAJJh6tCnwil8oJlaJ5DSbORe8J8Ez
DlOoNIKk1byGfN6LrxKz
=l7eq
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt
STM32 DT updates for v4.12, round 1
Highlights:
----------
- ADD RTC support on STM32F746 MCU
- Enable RTC on STM32F746 Eval board
- Enable clocks on STM32F746 MCU
- Enable DMA, pwm1 and pwm3 on STM32F429I Eval
- Add support of STM32H743 MCU and his Eval board
- Enable USB HS and FS on STM32F469 Disco board
* tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
dt-bindings: Document the STM32 USB OTG DWC2 core binding
ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco
ARM: dts: stm32: Enable USB FS on stm32f469-disco
ARM: dts: stm32: Add USB FS support for STM32F429 MCU
ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board
ARM: dts: stm32: Enable pwm1 and pwm3 on stm32f429i-eval
ARM: dts: stm32: Enable dma by default on stm32f4 adc
ARM: dts: stm32: enable RTC on stm32746g-eval
ARM: dts: stm32: Add RTC support for STM32F746 MCU
ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f746
dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file
ARM: dts: stm32: Enable clocks for STM32F746 MCU
Signed-off-by: Olof Johansson <olof@lixom.net>
The A33 supports 1.1GHz and 1.2GHz frequencies at 1.32V and the Sinlinx
SinA33 has its cpu-supply property set in the cpu DT node.
Therefore, CPUfreq knows how to handle the regulator in charge of the
CPU and can adjust its voltage to match the OPP.
Add these two CPU frequencies to the CPU OPP table of the Sinlinx
SinA33.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This adds GPU thermal throttling for the Allwinner A33.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
This adds CPU thermal throttling for the Allwinner A33. It uses the
thermal sensor present in the SoC's GPADC.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This adds the DT node for the thermal sensor present in the Allwinner
A33 GPADC.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch changes the device node position of ps20 and ps21 to fix
ordering by rising physical address.
From
uart7: serial@01c29c00
i2c0: i2c@01c2ac00
i2c1: i2c@01c2b000
i2c2: i2c@01c2b400
ps20: ps2@01c2a000
ps21: ps2@01c2a400
to
uart7: serial@01c29c00
ps20: ps2@01c2a000
ps21: ps2@01c2a400
i2c0: i2c@01c2ac00
i2c1: i2c@01c2b000
i2c2: i2c@01c2b400
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A20 SoC has an on-board CAN controller. This patch adds
the pinctrl settings for pins PH20 and PH21.
This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A20 SoC has an on-board CAN controller.
This patch adds the device node.
The CAN controller is inherited from the A10 SoC and uses the same driver.
This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A10 SoC has an on-board CAN controller. This patch adds the
pinctrl settings for pins PH20 and PH21.
This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A10 SoC has an on-board CAN controller.
This patch adds the device node.
This patch is adapted from the description in
Documentation/devicetree/bindings/net/can/sun4i_can.txt
Signed-off-by: Patrick Menschel <menschel.p@posteo.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Cubietruck has an AXP209 PMIC and can be power-supplied by ACIN via
the CHG-IN pin or by USB.
This enables the ACIN and the USB power supply subnode in the DT.
Signed-off-by: Alexander Syring <alex@asyring.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch enables USB HS working in FS mode on stm32f429-disco
with 5V VBUS enable.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
This patch enables USB FS on stm32f469-disco with 5V VBUS enable.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
This patch adds the USB pins and nodes for USB FS core.
Signed-off-by: Bruno Herrera <bruherrera@gmail.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
There was a little conflict between the v4.11 bugfixes and the new changes for 4.12,
this merges the fixes into the 4.12 branch to avoid having to resolve it again.
* Broadcom fixes in mainline
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: BCM5301X: Fix memory start address
ARM: dts: BCM5301X: Fix UARTs on bcm953012k
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add hecc node for am35x
- Add onenand support for omap3-igep
- Add bluetooth binding for n900/n9/n950
- Configure clocks and SATA for dm81xx
- Update operating points tables for am33xx, am43xx and dra7
- Update SPI flash documentation for w25q64
- Configure SPI NOR for am335x-icev2
- Mux uart0 for am437x-gp-evm
- Add thermal zones for omap3, omap4, omap5, dra7
- Configure LEDs for am335x-baltos
- A series of droid 4 changes to configure various devices
such as keypad, regulators, gpio-keys, rtc, power button,
compass, accelerometer, touchscreen, backlight, poweroff,
tmp105, HDMI, LCD panel and LEDs, EHCI, and micro-SD
-----BEGIN PGP SIGNATURE-----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=CRcK
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.12/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "Devicetree changes for omaps for v4.12 merge window" from Tony Lindgren:
- Add hecc node for am35x
- Add onenand support for omap3-igep
- Add bluetooth binding for n900/n9/n950
- Configure clocks and SATA for dm81xx
- Update operating points tables for am33xx, am43xx and dra7
- Update SPI flash documentation for w25q64
- Configure SPI NOR for am335x-icev2
- Mux uart0 for am437x-gp-evm
- Add thermal zones for omap3, omap4, omap5, dra7
- Configure LEDs for am335x-baltos
- A series of droid 4 changes to configure various devices
such as keypad, regulators, gpio-keys, rtc, power button,
compass, accelerometer, touchscreen, backlight, poweroff,
tmp105, HDMI, LCD panel and LEDs, EHCI, and micro-SD
* tag 'omap-for-v4.12/dt-v2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits)
ARM: dts: am335x-baltos: add LED support
ARM: dts: omap4-droid4: Fix MMC1 card for detect GPIO and regulator
ARM: dts: OMAP4460: Thermal: Add slope and offset values
ARM: dts: OMAP443x: Thermal: Add slope and offset values
ARM: dts: OMAP5: Thermal: Add slope and offset values
ARM: dts: DRA7: Thermal: Add slope and offset values
ARM: dts: omap3: Add cpu_thermal zone
ARM: dts: am437x-gp-evm: Add pinmux for uart0
ARM: dts: am335x-icev2: Add SPI based NOR
Documentation: devicetree: mtd: add w25q64 to list of supported SPI flashes
ARM: dts: dra7: Add updated operating-points-v2 table for cpu
ARM: dts: am4372: Update operating-points-v2 table for cpu
ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu
ARM: dts: am33xx: Add updated operating-points-v2 table for cpu
ARM: dts: dm8168-evm: add SATA node
ARM: dts: dm8168-evm: add the external reference clock for SATA
ARM: dts: N9/N950: add bluetooth
ARM: dts: N900: Add bluetooth
ARM: dts: omap4-droid4: Configure EHCI so modems can be accessed
ARM: dts: motorola-cpcap-mapphone: add LEDs
...
definitions for the mmc resets in the socs reset controller, sound
support for the Rock2, dma support for mmc controllers on the rk3188
and a led-fix for the MiQi board and and irq-fix for older Cortex-A9 socs.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAljY6NUQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgTORB/49/3AhQ9neAjN5igVGMxv2PX5OPkYz07wJ
AgPPyUDBchXIU2teAuPzv/T9rS0wAJR58qLL7JiYjYz+II/XE3qWJUjiT5p5mjsp
ko4ijesWraf5C7z2ltL0T25lIyZwkjCJgjMzIxLMOsDgF4nN1yBxYh18CXXyc3sL
G3GYVGwEAhM9EwFjzrpyL7guFe2ZiKAZ7QmVeLmsDT9goECgz1XebuM+3idbOwJB
JjhmOmiSuUAHZO6o3soOZiDzb6xD9MELp/5a6MAoyoBWfnzHFtvsGwD/npDBEFB8
7JP9z4tc+LgKlIjg3QWUU52FVm1vEKA8p7jMNLpZmlMkc7pNPjLf
=oPg4
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt
Pull "Rockchip dts32 updates for 4.12 part1" from Heiko Stübner:
Contains one new board, the Tinkerboard from Asus based on the rk3288,
definitions for the mmc resets in the socs reset controller, sound
support for the Rock2, dma support for mmc controllers on the rk3188
and a led-fix for the MiQi board and and irq-fix for older Cortex-A9 socs.
* tag 'v4.12-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: setup DMA-channels for mmc0 and emmc for rk3188
ARM: dts: rockchip: fix PPI misconfiguration on Cortex-A9 socs
ARM: dts: rockchip: add rk322x dw-mmc resets
ARM: dts: rockchip: add rk3066/rk3188 dw-mmc resets
ARM: dts: rockchip: add rk3036 dw-mmc resets
ARM: dts: rockchip: add rk3288 dw-mmc resets
ARM: dts: rockchip: add dts for RK3288-Tinker board
dt-bindings: add rk3288-based Asus Tinker board
ARM: dts: rockchip: fix the MiQi board's LED definition
ARM: dts: rockchip: Add support for ES8388 to the Radxa Rock 2
- Add the power controller to the DTS.
- Augment the GPIO nodes to also include the Faraday
compatible.
- Add the PCI bus host and config to the Gemini device trees.
-----BEGIN PGP SIGNATURE-----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=AkSm
-----END PGP SIGNATURE-----
Merge tag 'gemini-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt
Pull "DTS updates for the Gemini on top of the multiplatform base" from Linus Walleij:
- Add the power controller to the DTS.
- Augment the GPIO nodes to also include the Faraday
compatible.
- Add the PCI bus host and config to the Gemini device trees.
* tag 'gemini-dts-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: add PCI to the Gemini device trees
ARM: dts: augment Gemini GPIO nodes
ARM: dts: add power controller to the Gemini DTS
4.12, please pull the following:
- Rafal:
* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
a bunch of BCM43602 radios.
* updates the BCM5301X DTS and DTS include file and moves the serial
console parameters to the DTS include file since all BCM5301X that we have so
far are consistent in using the same UART. He also does the same for the
BCM53573 DTS.
* makes some updates to the Tenda AC9 platform by describing its
PCIe controllers and endpoints in order to be able to represent GPIOs attached
to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
to one of these GPIOs.
* re-licenses the DTS files he created to the ISC license
* removes the use of the non-existend "default-off" LED trigger in the
BCM53573 and BCM5301X DTS files
- Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness
- Jon:
* adds NAND controller Device Tree nodes to the BCM953012K reference board
* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
Device Tree nodes.
* fixes the GIC PPI interrupt flags that the kernel now
reports about.
* adds ARM TWD watchdog entries to the BCM5301X DTS include file
* adds I2C entries to the BCM5301X DTS include files.
* disables i2c by default in the Northstar Plus DTS include file, and
,enables it at the board level instead.
* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
include files.
- Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
aliases to the BCM53012HR board since some bootloaders require that for MAC address
patching.
- Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
but leaves them disabled by default (overlays should take care of enabling it)
- Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs
- Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs
- Rob fixes the iProc msi-controller name and unit address now that DTC can produce
additional errors
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJY1VzSAAoJEIfQlpxEBwcEI+EQALcm2qF0IP/y3xYB4kmNBf3b
Xnb81oMhMcfFHj6CSQDdSObj8lv9FU4RoktosNtqYUTgvZUGsf/5GqWcwoYekH7W
+1yrHdX9Cjx9B8A5FyQDIRyYZVbQ3yON0MhEo7X9gIPbi03uAdsIEOW4v+5DbRat
X1aPhy0NkybhpDKzSudFejvIIM0IdjhhnUuBg3JtBC1mAMX0cnh+/lzxdxFXRMlV
YvHGi3KYSGR4hEYnAlyHlFJsuTHYNN9rHKO0QyMTMGF2GyrLUuo9kO68kxmRzxEU
LEcDFG/6oPQlzmc/KRIQHWjW+jBRvTn6n3cqwBHbwJc4P0S+f7b0UlG/uEwsfeD/
jf8vIMFTa/IOgP4cabnDms8NW+x5Dl4ppizB5WB/3lFG09iSFJNNHBHnFLPF/N7A
aw70ui47SbPbNxstAenHd/yJrkkNleitr1YQTQLLORof9+h0bePgxphM0AKgBrFU
fEiC916fDkuyIj7+Qq2TUUiJnhfUA1bT6Vav+L3Hc4mWMS+xDuOLYIZv+Isf1eam
duOQ3ECHHqP9VXf2qug4xwsAHalu3FTZT+FJEgJsFJ47mUnA4v7ySN0//Ta1crX3
4P2Stt/0x0Ai/8Gx4DhqAI7CsIsRpb9FJ0KOUJTad/AlO5NAQvvzQoDjvVUQR7Km
wIZiU2hq+PrtjLlc7bot
=VFXn
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.12" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree updates for
4.12, please pull the following:
- Rafal:
* adds basic support for the Linksys EA9200, Linksys EA6300 V1, Linksys
EA9500, TP-Link Archer C5 V2 which are all based on BCM470x SoCs with
a bunch of BCM43602 radios.
* updates the BCM5301X DTS and DTS include file and moves the serial
console parameters to the DTS include file since all BCM5301X that we have so
far are consistent in using the same UART. He also does the same for the
BCM53573 DTS.
* makes some updates to the Tenda AC9 platform by describing its
PCIe controllers and endpoints in order to be able to represent GPIOs attached
to the on-chip Wi-Fi module. Once done, he adds the 2Ghz LED which is connected
to one of these GPIOs.
* re-licenses the DTS files he created to the ISC license
* removes the use of the non-existend "default-off" LED trigger in the
BCM53573 and BCM5301X DTS files
- Aditya adds missing Netgear R8000 LEDS and keys for WAN status LEDS and brightness
- Jon:
* adds NAND controller Device Tree nodes to the BCM953012K reference board
* converts the BCM5301X SoC to use the recently introduced Broadcom QSPI controller
Device Tree nodes.
* fixes the GIC PPI interrupt flags that the kernel now
reports about.
* adds ARM TWD watchdog entries to the BCM5301X DTS include file
* adds I2C entries to the BCM5301X DTS include files.
* disables i2c by default in the Northstar Plus DTS include file, and
,enables it at the board level instead.
* adds USB (OHCI & EHCI) Device Tree nodes to the Northstar Plus DTS
include files.
- Steven adds the mailbox (PDC) unit and the crytographic unit (SPU) to the
Broadcom Northstar Plus SoC DTS include file. Steven also adds proper ethernet
aliases to the BCM53012HR board since some bootloaders require that for MAC address
patching.
- Eric adds the DSI and its corresponding clock nodes to the BCM283x DTS files
but leaves them disabled by default (overlays should take care of enabling it)
- Boris adds support for HDMI audio and related DMA channels to the BCM283x SoCs
- Gerd adds support for the BCM2835 specific SDHCI controller to the BCM283x SoCs
- Rob fixes the iProc msi-controller name and unit address now that DTC can produce
additional errors
* tag 'arm-soc/for-4.12/devicetree' of http://github.com/Broadcom/stblinux: (27 commits)
ARM: dts: bcm: fix msi-controller name and unit address
ARM: dts: BCM53573: Specify serial console parameters
ARM: dts: BCM5301X: Specify serial console params in dtsi files
ARM: dts: NSP: Add crypto (SPU) to dtsi
ARM: dts: NSP: Add mailbox (PDC) to NSP
ARM: dts: BCM953012HR: Add ethernet aliases
ARM: dts: BCM5301X: Add support for TP-LINK Archer C5 V2
ARM: dts: NSP: disable i2c DT entry by default
ARM: dts: NSP: Add EHCI/OHCI USB nodes to device tree
ARM: dts: BCM5301X: Add I2C support to the DT
ARM: dts: BCM5301X: Add TWD WD Support to DT
ARM: dts: BCM5301X: Correct GIC_PPI interrupt flags
ARM: dts: bcm2835: add sdhost controller to devicetree
ARM: dts: bcm283x: Add HDMI audio related properties
ARM: dts: BCM5301X: Don't use nonexistent "default-off" LED trigger
ARM: dts: BCM53573: Don't use nonexistent "default-off" LED trigger
ARM: dts: BCM5301X: Add missing Netgear R8000 LEDs and Keys
ARM: dts: BCM5301X: Relicense DTS files I created to the ISC
ARM: dts: bcm2835: Add the DSI module nodes and clocks.
ARM: dts: BCM53573: Add Tenda AC9 2 GHz LED
...
- Add node lable for Armada 38x
- Add support for Synology DS116 NAS and Linksys WRT1900ACS
- Update mbus controller description on Armada 38x allowing entering in standby
- Add default trigger for sata led on various linksys boards
- Update newly added armada-xp-98dx3236
- Enable hardware buffer manager support for the devices in the
Linksys WRT AC Serie
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWNVVVyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71f1XAJ0WIMcrTJPA
uiYAEbN2f+InledW9wCeOD5+hJTSEFFznZSfbzN4Morh0tw=
=+cen
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.12 (part 1)" from Gregory CLEMENT:
- Add node lable for Armada 38x
- Add support for Synology DS116 NAS and Linksys WRT1900ACS
- Update mbus controller description on Armada 38x allowing entering in standby
- Add default trigger for sata led on various linksys boards
- Update newly added armada-xp-98dx3236
- Enable hardware buffer manager support for the devices in the
Linksys WRT AC Serie
* tag 'mvebu-dt-4.12-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: mvebu: linksys: enable buffer manager support
ARM: dts: mvebu: remove unnecessary PCI range from 98dx3236
ARM: dts: mvebu: Move mv98dx3236 clock bindings
ARM: dts: Use armada-370-xp as a base for armada-xp-98dx3236
ARM: dts: armada-xp-98dx3236: combine dfx server nodes
ARM: dts: armada: Add default trigger for sata led
ARM: dts: armada-38x: Adjust mbus controller description on Armada 38x
ARM: dts: armada-385: add support for the Linksys WRT1900ACS (Shelby)
ARM: dts: armada-385-synology-ds116: add support for Synology DS116 NAS
ARM: dts: armada-38x add node labels
Video display on DA850 along with some
whitespace clean-up.
Also, enables sound and ADC support on
Lego EV3.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DFR4
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DT updates for v4.12" from Sekhar Nori:
DaVinci device tree updates to enable
Video display on DA850 along with some
whitespace clean-up.
Also, enables sound and ADC support on
Lego EV3.
* tag 'davinci-for-v4.12/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-evm: add the output port to the vpif node
ARM: dts: da850-evm: add IO expander node on UI card
ARM: dts: da850: add vpif video display pins
ARM: dts: da850-evm: fix whitespace errors
ARM: da850-lego-ev3: Add device tree node for sound
ARM: da850-lego-ev3: Add device tree node for A/DC
The Moxa ART GPIO is a Faraday FTGPIO010. Augment the DTS node
to indicate both compatible values for the SoC and the IP part.
Also increase the register range to 0x100, it has at least 0x48
bytes of registers, and a few extra will not hurt.
Tested-by: Jonas Jensen <jonas.jensen@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This moves the spi0_cs3_pin pinconf node from the LEGO EV3 file to the
common DA850 include file. This node is applicable to any board, and
therefore belongs in the common file.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The two st231-rproc nodes have the same name; Due to that it was
impossible to distinguish them in remoteproc sysfs and debugfs
interface.
This patch provides them a name related to their functionality.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
The display backend on sun5i shares the same interrupt line as the
display frontend. Add it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
All three devices provide GPIO based LEDs named power,
wlan and app.
Place LEDs definition into a separate dtsi file as not all
devices including am335x-baltos.dtsi have the same LED layout.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
There's a typo, it should be GPIO176 and not GPIO106.
And it seems I messed up the regulators at some point while trying
to figure out what devices the regulators are used. The correct
regulator for MMC1 is vwlan2.
Fixes: 0d4cb3ccee ("ARM: dts: Configure regulators for droid 4")
Reported-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit makes use of the axp209.dtsi file to define the
AXP209 PMIC. While here, define the rails that are enabled on
this board.
Tested checking the regulator voltage varies according to the
CPU frequency.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The SinA31s has a coaxial SPDIF output. Enable it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This adds the cpu-supply DT property to the cpu0 DT node needed by
the board to adapt the regulator voltage depending on the currently used
OPP.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This adds almost all operating points allowed for the A33 as defined by
fex files available at:
https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33
There are more possible frequencies in this patch than there are in the
fex files because the fex files only give an interval of possible
frequencies for a given voltage. All supported frequencies are defined
in the original driver code in Allwinner vendor tree.
There are two missing frequencies though: 1104MHz and 1200MHz which
require the CPU to have 1.32V supplied, which is higher than the default
voltage.
Without all A33 boards defining the CPU regulator, we cannot have these
two frequencies as it would cause the CPU to try to run a higher
frequency without "overvolting" which is very likely to crash the CPU.
Therefore, these two frequencies must be enabled on a per-board basis.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The NextThing Co. CHIP has an AXP209 PMIC and can be power-supplied by
ACIN via the CHG-IN pin.
This enables the ACIN power supply subnode in the DT.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Sinlinx SinA33 has an AXP223 PMIC and an ACIN connector, thus, we
enable the ACIN power supply in its Device Tree.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The X-Powers AXP22X PMIC exposes the status of AC power supply.
This adds the AC power supply subnode for the AXP22X PMIC.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The X-Powers AXP20X PMIC exposes the status of AC power supply, the
current current and voltage supplied to the board by the AC power
supply.
This adds the AC power supply subnode for AXP20X PMIC.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
All dts files for the sunxi platform have been switched to the generic
pinconf bindings. As a result, the sunxi specific pinctrl macros are
no longer used.
Remove the #include entry with the following command:
sed --follow-symlinks -i -e '/pinctrl\/sun4i-a10.h/D' \
arch/arm/boot/dts/sun?i*.*
arch/arm/boot/dts/sun9i-a80.dtsi was then edited to remove the extra
empty line.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The old sunxi specific pinctrl bindings are deprecated, in favor of
the new generic pinconf bindings. Also, we are moving towards handling
GPIO pinmux settings that don't require extra bias or drive strength
settings to use the GPIO bindings only.
This patch removes the last instance of the sunxi specific pinctrl
bindings that use the pinctrl header by dropping the pinmux setting
for the audio codec's PA (external amplifier) control GPIO. The pin
is pulled down externally.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Cortina Gemini has an internal PCI root bus, add this to
the device tree, and add interrupt mapping (swizzling) to the
relevant systems device trees.
Cc: Janos Laube <janos.dev@gmail.com>
Cc: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Feng-Hsin Chiang <john453@faraday-tech.com>
Cc: Greentime Hu <green.hu@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Raspberry Pi, and nodes to describe the DSI and SDHOST hardware
modules (which are still disabled by default).
-----BEGIN PGP SIGNATURE-----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=bTSQ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cLA3
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-next-2017-03-21' into devicetree/next
This pull request brings in the DT nodes for enabling HDMI audio on
Raspberry Pi, and nodes to describe the DSI and SDHOST hardware
modules (which are still disabled by default).
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently the slope and offset values for calculating the
hot spot temperature of a particular thermal zone is part
of driver data. Pass them here instead and obtain the values
while of node parsing.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
