Commit Graph

21 Commits

Author SHA1 Message Date
Thomas Gleixner
d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00
Eugeniy Paltsev
edb64bca50 ARC: u-boot args: check that magic number is correct
In case of devboards we really often disable bootloader and load
Linux image in memory via JTAG. Even if kernel tries to verify
uboot_tag and uboot_arg there is sill a chance that we treat some
garbage in registers as valid u-boot arguments in JTAG case.
E.g. it is enough to have '1' in r0 to treat any value in r2 as
a boot command line.

So check that magic number passed from u-boot is correct and drop
u-boot arguments otherwise. That helps to reduce the possibility
of using garbage as u-boot arguments in JTAG case.

We can safely check U-boot magic value (0x0) in linux passed via
r1 register as U-boot pass it from the beginning. So there is no
backward-compatibility issues.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-25 12:11:01 -08:00
Eugeniy Paltsev
7655146883 ARCv2: Add explcit unaligned access support (and ability to disable too)
As of today we enable unaligned access unconditionally on ARCv2.
Do this under a Kconfig option to allow disable it for test, benchmarking
etc. Also while at it

  - Select HAVE_EFFICIENT_UNALIGNED_ACCESS
  - Although gcc defaults to unaligned access (since GNU 2018.03), add the
    right toggles for enabling or disabling as appropriate
  - update bootlog to prints both HW feature status (exists, enabled/disabled)
    and SW status (used / not used).
  - wire up the relaxed memcpy for unaligned access

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: squashed patches, handle gcc -mno-unaligned-access quick]
2019-02-25 12:10:58 -08:00
Eugeniy Paltsev
493a2f8124 ARC: enable uboot support unconditionally
After reworking U-boot args handling code and adding paranoid
arguments check we can eliminate CONFIG_ARC_UBOOT_SUPPORT and
enable uboot support unconditionally.

For JTAG case we can assume that core registers will come up
reset value of 0 or in worst case we rely on user passing
'-on=clear_regs' to Metaware debugger.

Cc: stable@vger.kernel.org
Tested-by: Corentin LABBE <clabbe@baylibre.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21 11:03:19 -08:00
Eugeniy Paltsev
a66f2e57bd ARC: U-boot: check arguments paranoidly
Handle U-boot arguments paranoidly:
 * don't allow to pass unknown tag.
 * try to use external device tree blob only if corresponding tag
   (TAG_DTB) is set.
 * don't check uboot_tag if kernel build with no ARC_UBOOT_SUPPORT.

NOTE:
If U-boot args are invalid we skip them and try to use embedded device
tree blob. We can't panic on invalid U-boot args as we really pass
invalid args due to bug in U-boot code.
This happens if we don't provide external DTB to U-boot and
don't set 'bootargs' U-boot environment variable (which is default
case at least for HSDK board) In that case we will pass
{r0 = 1 (bootargs in r2); r1 = 0; r2 = 0;} to linux which is invalid.

While I'm at it refactor U-boot arguments handling code.

Cc: stable@vger.kernel.org
Tested-by: Corentin LABBE <clabbe@baylibre.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2019-02-21 11:03:18 -08:00
Eugeniy Paltsev
252f6e8eae ARCv2: Enable unaligned access in early ASM code
It is currently done in arc_init_IRQ() which might be too late
considering gcc 7.3.1 onwards (GNU 2018.03) generates unaligned
memory accesses by default

Cc: stable@vger.kernel.org #4.4+
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
2019-02-21 11:03:15 -08:00
Vineet Gupta
bf02454a74 ARC: smp-boot: Decouple Non masters waiting API from jump to entry point
For run-on-reset SMP configs, non master cores call a routine which
waits until Master gives it a "go" signal (currently using a shared
mem flag). The same routine then jumps off the well known entry point of
all non Master cores i.e. @first_lines_of_secondary

This patch moves out the last part into one single place in early boot
code.

This is better in terms of absraction (the wait API only waits) and
returns, leaving out the "jump off to" part.

In actual implementation this requires some restructuring of the early
boot code as well as Master now jumps to BSS setup explicitly,
vs. falling thru into it before.

Technically this patch doesn't cause any functional change, it just
moves the ugly #ifdef'ry from assembly code to "C"

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-01-24 11:12:28 -08:00
Vineet Gupta
483bcc99c0 ARC: boot: Non Master cpus only need to call EARLY_CPU_SETUP once
With prev fixes, all cores now start via common entry point @stext which
already calls EARLY_CPU_SETUP for all cores - so no need to invoke it
again

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28 16:13:42 +05:30
Vineet Gupta
3971cdc202 ARC: boot: Support Halt-on-reset and Run-on-reset SMP booting modes
For Run-on-reset, non masters need to spin wait. For Halt-on-reset they
can jump to entry point directly.

Also while at it, made reset vector handler as "the" entry point for
kernel including host debugger based boot (which uses the ELF header
entry point)

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-10-28 16:08:17 +05:30
Vineet Gupta
1f6ccfff63 ARCv2: Support for ARCv2 ISA and HS38x cores
The notable features are:
    - SMP configurations of upto 4 cores with coherency
    - Optional L2 Cache and IO-Coherency
    - Revised Interrupt Architecture (multiple priorites, reg banks,
        auto stack switch, auto regfile save/restore)
    - MMUv4 (PIPT dcache, Huge Pages)
    - Instructions for
	* 64bit load/store: LDD, STD
	* Hardware assisted divide/remainder: DIV, REM
	* Function prologue/epilogue: ENTER_S, LEAVE_S
	* IRQ enable/disable: CLRI, SETI
	* pop count: FFS, FLS
	* SETcc, BMSKN, XBFU...

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-22 14:06:55 +05:30
Vineet Gupta
036b2c5664 ARC: explicit'ify uboot support
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-06-19 18:09:27 +05:30
Vineet Gupta
435abb6daf ARC: RIP @running_on_hw
* No active users of this flag anymore

* flag itself was no longer usable with new simualtor which acts just like
  hardware, not providing the special chip-id = 0xffff which good old
  ISS used to do.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-10-13 14:46:17 +05:30
Vineet Gupta
bef444a330 ARC: optimize kernel bss clearing in early boot code
using ARC ZOL which reduces tot num of instructions by half

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-06-26 10:14:05 +05:30
Vineet Gupta
ef680cdc24 ARC: Disable caches in early boot if so configured
Requested-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-06-03 15:14:48 +05:30
Vineet Gupta
c3441edd2d ARC: [SMP] General Fixes
-Pass the expected arg to non-boot park'ing routine
 (It worked so far because existing SMP backends don't use the arg)

-CONFIG_DEBUG_PREEMPT warning
2014-04-05 14:46:42 +05:30
Vineet Gupta
59ed941353 ARC: [cmdline] uboot cmdline handling rework
* Moved cmdline copy from asm to "C" - allows for more robust checking
  of pointer validity etc.

* Remove the Kconfig option to do so, base it on a runtime value passed
  by u-boot

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2014-01-16 18:49:38 +05:30
Chen Gang
8f5d221b06 arc: remove '__init' for first_lines_of_secondary()
first_lines_of_secondary() is a '__init' function, but it may be called
by __cpu_up() by _cpu_up() by cpu_up() which is a normal export symbol
function. So recommend to remove '__init'.

The related warning (with allmodconfig):

    MODPOST vmlinux.o
  WARNING: vmlinux.o(.text+0x315c): Section mismatch in reference from the function __cpu_up() to the function .init.text:first_lines_of_secondary()
  The function __cpu_up() references
  the function __init first_lines_of_secondary().
  This is often because __cpu_up lacks a __init
  annotation or the annotation of first_lines_of_secondary is wrong.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
2013-11-06 10:41:43 +05:30
Noam Camus
c3567f8a35 ARC: SMP failed to boot due to missing IVT setup
Commit 05b016ecf5 "ARC: Setup Vector Table Base in early boot" moved
the Interrupt vector Table setup out of arc_init_IRQ() which is called
for all CPUs, to entry point of boot cpu only, breaking booting of others.

Fix by adding the same to entry point of non-boot CPUs too.

read_arc_build_cfg_regs() printing IVT Base Register didn't help the
casue since it prints a synthetic value if zero which is totally bogus,
so fix that to print the exact Register.

[vgupta: Remove the now stale comment from header of arc_init_IRQ and
also added the commentary for halt-on-reset]

Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Cc: <stable@vger.kernel.org> #3.11
Signed-off-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 07:40:08 -07:00
Vineet Gupta
05b016ecf5 ARC: Setup Vector Table Base in early boot
Otherwise early boot exceptions such as instructions errors due to
configuration mismatch between kernel and hardware go off to la-la land,
as opposed to hitting the handler and panic()'ing properly.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2013-06-26 15:30:51 +05:30
Vineet Gupta
41195d236e ARC: SMP support
ARC common code to enable a SMP system + ISS provided SMP extensions.

ARC700 natively lacks SMP support, hence some of the core features are
are only enabled if SoCs have the necessary h/w pixie-dust. This
includes:
-Inter Processor Interrupts (IPI)
-Cache coherency
-load-locked/store-conditional
...

The low level exception handling would be completely broken in SMP
because we don't have hardware assisted stack switching. Thus a fair bit
of this code is repurposing the MMU_SCRATCH reg for event handler
prologues to keep them re-entrant.

Many thanks to Rajeshwar Ranga for his initial "major" contributions to
SMP Port (back in 2008), and to Noam Camus and Gilad Ben-Yossef for help
with resurrecting that in 3.2 kernel (2012).

Note that this platform code is again singleton design pattern - so
multiple SMP platforms won't build at the moment - this deficiency is
addressed in subsequent patches within this series.

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Rajeshwar Ranga <rajeshwar.ranga@gmail.com>
Cc: Noam Camus <noamc@ezchip.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
2013-02-15 23:16:02 +05:30
Vineet Gupta
c121c5063c ARC: Boot #1: low-level, setup_arch(), /proc/cpuinfo, mem init
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
2013-02-15 23:15:54 +05:30