Commit Graph

839 Commits

Author SHA1 Message Date
Bart Van Assche
aa3fc09078 tgt: defconfig cleanup
Because of the removal of the scsi_tgt kernel module, the kbuild variables
CONFIG_SCSI_TGT, CONFIG_SCSI_SRP_TGT_ATTRS and CONFIG_SCSI_FC_TGT_ATTRS
are obsolete. This patch removes these variables. This patch is the result
of the following command:

find -name '*defconfig' | while read f; do grep -vwE 'CONFIG_SCSI_TGT|CONFIG_SCSI_SRP_TGT_ATTRS|CONFIG_SCSI_FC_TGT_ATTRS|CONFIG_SRP' $f >/tmp/t && mv /tmp/t $f; done

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
2014-07-17 22:07:44 +02:00
Davidlohr Bueso
3a6bfbc91d arch, locking: Ciao arch_mutex_cpu_relax()
The arch_mutex_cpu_relax() function, introduced by 34b133f, is
hacky and ugly. It was added a few years ago to address the fact
that common cpu_relax() calls include yielding on s390, and thus
impact the optimistic spinning functionality of mutexes. Nowadays
we use this function well beyond mutexes: rwsem, qrwlock, mcs and
lockref. Since the macro that defines the call is in the mutex header,
any users must include mutex.h and the naming is misleading as well.

This patch (i) renames the call to cpu_relax_lowlatency  ("relax, but
only if you can do it with very low latency") and (ii) defines it in
each arch's asm/processor.h local header, just like for regular cpu_relax
functions. On all archs, except s390, cpu_relax_lowlatency is simply cpu_relax,
and thus we can take it out of mutex.h. While this can seem redundant,
I believe it is a good choice as it allows us to move out arch specific
logic from generic locking primitives and enables future(?) archs to
transparently define it, similarly to System Z.

Signed-off-by: Davidlohr Bueso <davidlohr@hp.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bharat Bhushan <r65777@freescale.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Liqin <liqin.linux@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Howells <dhowells@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Cc: Dominik Dingel <dingel@linux.vnet.ibm.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Joe Perches <joe@perches.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Joseph Myers <joseph@codesourcery.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Salter <msalter@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Qiaowei Ren <qiaowei.ren@intel.com>
Cc: Rafael Wysocki <rafael.j.wysocki@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Kuo <rkuo@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Steven Miao <realmz6@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Stratos Karafotis <stratosk@semaphore.gr>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Kulikov <segoon@openwall.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: Waiman Long <Waiman.Long@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: adi-buildroot-devel@lists.sourceforge.net
Cc: linux390@de.ibm.com
Cc: linux-alpha@vger.kernel.org
Cc: linux-am33-list@redhat.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-c6x-dev@linux-c6x.org
Cc: linux-cris-kernel@axis.com
Cc: linux-hexagon@vger.kernel.org
Cc: linux-ia64@vger.kernel.org
Cc: linux@lists.openrisc.net
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-metag@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Cc: linux-sh@vger.kernel.org
Cc: linux-xtensa@linux-xtensa.org
Cc: sparclinux@vger.kernel.org
Link: http://lkml.kernel.org/r/1404079773.2619.4.camel@buesod1.americas.hpqcorp.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-17 12:32:47 +02:00
Linus Torvalds
7ec6131b55 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile changes from Chris Metcalf:
 "These mostly just address smaller issues reported to me"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables
  drivers/tty/hvc/hvc_tile.c: use PTR_ERR_OR_ZERO
  replace strict_strto* call with kstrto*
  tile: Update comments for generic idle conversion
  tile: cleanup the comment in init_pgprot
  tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags
2014-06-11 16:50:01 -07:00
Rickard Strandqvist
50b9ac1813 arch: tile: kernel: unaligned.c: Cleaning up uninitialized variables
There is a risk that the variable will be used without being initialized.

This was largely found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [minor cleanups]
2014-06-07 21:39:11 -04:00
Joe Perches
804bcaf79b tile: convert use of typedef ctl_table to struct ctl_table
This typedef is unnecessary and should just be removed.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:15 -07:00
Linus Torvalds
00170fdd08 Merge branch 'akpm' (patchbomb from Andrew) into next
Merge misc updates from Andrew Morton:

 - a few fixes for 3.16.  Cc'ed to stable so they'll get there somehow.

 - various misc fixes and cleanups

 - most of the ocfs2 queue.  Review is slow...

 - most of MM.  The MM queue is pretty huge this time, but not much in
   the way of feature work.

 - some tweaks under kernel/

 - printk maintenance work

 - updates to lib/

 - checkpatch updates

 - tweaks to init/

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (276 commits)
  fs/autofs4/dev-ioctl.c: add __init to autofs_dev_ioctl_init
  fs/ncpfs/getopt.c: replace simple_strtoul by kstrtoul
  init/main.c: remove an ifdef
  kthreads: kill CLONE_KERNEL, change kernel_thread(kernel_init) to avoid CLONE_SIGHAND
  init/main.c: add initcall_blacklist kernel parameter
  init/main.c: don't use pr_debug()
  fs/binfmt_flat.c: make old_reloc() static
  fs/binfmt_elf.c: fix bool assignements
  fs/efs: convert printk(KERN_DEBUG to pr_debug
  fs/efs: add pr_fmt / use __func__
  fs/efs: convert printk to pr_foo()
  scripts/checkpatch.pl: device_initcall is not the only __initcall substitute
  checkpatch: check stable email address
  checkpatch: warn on unnecessary void function return statements
  checkpatch: prefer kstrto<foo> to sscanf(buf, "%<lhuidx>", &bar);
  checkpatch: add warning for kmalloc/kzalloc with multiply
  checkpatch: warn on #defines ending in semicolon
  checkpatch: make --strict a default for files in drivers/net and net/
  checkpatch: always warn on missing blank line after variable declaration block
  checkpatch: fix wildcard DT compatible string checking
  ...
2014-06-04 16:55:13 -07:00
Mel Gorman
b745bc85f2 mm: page_alloc: convert hot/cold parameter and immediate callers to bool
cold is a bool, make it one.  Make the likely case the "if" part of the
block instead of the else as according to the optimisation manual this is
preferred.

Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:54:09 -07:00
Naoya Horiguchi
c177c81e09 hugetlb: restrict hugepage_migration_support() to x86_64
Currently hugepage migration is available for all archs which support
pmd-level hugepage, but testing is done only for x86_64 and there're
bugs for other archs.  So to avoid breaking such archs, this patch
limits the availability strictly to x86_64 until developers of other
archs get interested in enabling this feature.

Simply disabling hugepage migration on non-x86_64 archs is not enough to
fix the reported problem where sys_move_pages() hits the BUG_ON() in
follow_page(FOLL_GET), so let's fix this by checking if hugepage
migration is supported in vma_migratable().

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Miller <davem@davemloft.net>
Cc: <stable@vger.kernel.org>	[3.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 16:53:51 -07:00
Linus Torvalds
d09cc3659d Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull core irq updates from Thomas Gleixner:
 "The irq department delivers:

   - Another tree wide update to get rid of the horrible create_irq
     interface along with its even more horrible variants.  That also
     gets rid of the last leftovers of the initial sparse irq hackery.
     arch/driver specific changes have been either acked or ignored.

   - A fix for the spurious interrupt detection logic with threaded
     interrupts.

   - A new ARM SoC interrupt controller

   - The usual pile of fixes and improvements all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  Documentation: brcmstb-l2: Add Broadcom STB Level-2 interrupt controller binding
  irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller
  genirq: Improve documentation to match current implementation
  ARM: iop13xx: fix msi support with sparse IRQ
  genirq: Provide !SMP stub for irq_set_affinity_notifier()
  irqchip: armada-370-xp: Move the devicetree binding documentation
  irqchip: gic: Use mask field in GICC_IAR
  genirq: Remove dynamic_irq mess
  ia64: Use irq_init_desc
  genirq: Replace dynamic_irq_init/cleanup
  genirq: Remove irq_reserve_irq[s]
  genirq: Replace reserve_irqs in core code
  s390: Avoid call to irq_reserve_irqs()
  s390: Remove pointless arch_show_interrupts()
  s390: pci: Check return value of alloc_irq_desc() proper
  sh: intc: Remove pointless irq_reserve_irqs() invocation
  x86, irq: Remove pointless irq_reserve_irqs() call
  genirq: Make create/destroy_irq() ia64 private
  tile: Use SPARSE_IRQ
  tile: pci: Use irq_alloc/free_hwirq()
  ...
2014-06-04 15:59:13 -07:00
Linus Torvalds
c84a1e32ee Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into next
Pull scheduler updates from Ingo Molnar:
 "The main scheduling related changes in this cycle were:

   - various sched/numa updates, for better performance

   - tree wide cleanup of open coded nice levels

   - nohz fix related to rq->nr_running use

   - cpuidle changes and continued consolidation to improve the
     kernel/sched/idle.c high level idle scheduling logic.  As part of
     this effort I pulled cpuidle driver changes from Rafael as well.

   - standardized idle polling amongst architectures

   - continued work on preparing better power/energy aware scheduling

   - sched/rt updates

   - misc fixlets and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
  sched/numa: Decay ->wakee_flips instead of zeroing
  sched/numa: Update migrate_improves/degrades_locality()
  sched/numa: Allow task switch if load imbalance improves
  sched/rt: Fix 'struct sched_dl_entity' and dl_task_time() comments, to match the current upstream code
  sched: Consolidate open coded implementations of nice level frobbing into nice_to_rlimit() and rlimit_to_nice()
  sched: Initialize rq->age_stamp on processor start
  sched, nohz: Change rq->nr_running to always use wrappers
  sched: Fix the rq->next_balance logic in rebalance_domains() and idle_balance()
  sched: Use clamp() and clamp_val() to make sys_nice() more readable
  sched: Do not zero sg->cpumask and sg->sgp->power in build_sched_groups()
  sched/numa: Fix initialization of sched_domain_topology for NUMA
  sched: Call select_idle_sibling() when not affine_sd
  sched: Simplify return logic in sched_read_attr()
  sched: Simplify return logic in sched_copy_attr()
  sched: Fix exec_start/task_hot on migrated tasks
  arm64: Remove TIF_POLLING_NRFLAG
  metag: Remove TIF_POLLING_NRFLAG
  sched/idle: Make cpuidle_idle_call() void
  sched/idle: Reflow cpuidle_idle_call()
  sched/idle: Delay clearing the polling bit
  ...
2014-06-03 14:00:15 -07:00
Daniel Walter
b2dfa048ba replace strict_strto* call with kstrto*
remove obsolete calls to strict_strto* and replace them
with kstrto* calls accordingly.

Signed-off-by: Daniel Walter <dwalter@google.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-05-28 15:47:16 -04:00
Geert Uytterhoeven
ba159fd387 tile: Update comments for generic idle conversion
As of commit 0dc8153cfe ("tile: Use generic
idle loop"), this applies to arch_cpu_idle() instead of cpu_idle().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-05-23 13:32:09 -04:00
Thomas Gleixner
b26d851ff1 tile: Use SPARSE_IRQ
Get rid of the private allocator and switch over to sparse IRQs.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20140507154338.423715783@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16 14:05:21 +02:00
Thomas Gleixner
2aa799d891 tile: pci: Use irq_alloc/free_hwirq()
No functional change. Just convert to the new interface.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20140507154338.132662495@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16 14:05:21 +02:00
Thomas Gleixner
6ef40512c5 tile: Implement irq_alloc/free_hwirq() for migration
We want to convert the drivers over to the new interface and finally
tile to sparse irqs. Implement irq_alloc/free_hwirq() for step by step
migration.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Grant Likely <grant.likely@linaro.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20140507154336.947853241@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-05-16 14:05:20 +02:00
Wang Sheng-Hui
e540e835f8 tile: cleanup the comment in init_pgprot
In tile vmlinux, the rodata area start after the _sdata.
The rodata area is included between [_sdata, __end_rodata),
and is handled at an earlier point.
The page walk starts at __end_rodata, not _sdata.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-05-13 11:51:10 -04:00
Peter Zijlstra
b3a8cb18ce sched/idle, tile: Switch from TS_POLLING to TIF_POLLING_NRFLAG
Standardize the idle polling indicator to TIF_POLLING_NRFLAG such that
both TIF_NEED_RESCHED and TIF_POLLING_NRFLAG are in the same word.
This will allow us, using fetch_or(), to both set NEED_RESCHED and
check for POLLING_NRFLAG in a single operation and avoid pointless
wakeups.

Changing from the non-atomic thread_info::status flags to the atomic
thread_info::flags shouldn't be a big issue since most polling state
changes were followed/preceded by a full memory barrier anyway.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/n/tip-35zzwlvwr7cp8xj196y10yyx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-08 09:16:54 +02:00
Vincent Guittot
143e1e28cb sched: Rework sched_domain topology definition
We replace the old way to configure the scheduler topology with a new method
which enables a platform to declare additionnal level (if needed).

We still have a default topology table definition that can be used by platform
that don't want more level than the SMT, MC, CPU and NUMA ones. This table can
be overwritten by an arch which either wants to add new level where a load
balance make sense like BOOK or powergating level or wants to change the flags
configuration of some levels.

For each level, we need a function pointer that returns cpumask for each cpu,
a function pointer that returns the flags for the level and a name. Only flags
that describe topology, can be set by an architecture. The current topology
flags are:

 SD_SHARE_CPUPOWER
 SD_SHARE_PKG_RESOURCES
 SD_NUMA
 SD_ASYM_PACKING

Then, each level must be a subset on the next one. The build sequence of the
sched_domain will take care of removing useless levels like those with 1 CPU
and those with the same CPU span and no more relevant information for
load balancing than its children.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Preeti U Murthy <preeti@linux.vnet.ibm.com>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Jason Low <jason.low2@hp.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux390@de.ibm.com
Cc: linux-ia64@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Link: http://lkml.kernel.org/r/1397209481-28542-2-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-05-07 13:33:49 +02:00
Wang Sheng-Hui
3af1ea5a2e tile: use BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem flags
Use macro flag BOOTMEM_DEFAULT instead of magic number 0 for reserve_bootmem.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-05-02 12:26:32 -04:00
Peter Zijlstra
ce3609f934 arch,tile: Convert smp_mb__*()
Implement the new smp_mb__* ops as per the old ones.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/n/tip-euuabnf5a3u23fy4fq8m3jcg@git.kernel.org
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Chen Gang <gang.chen@asianux.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-18 14:20:45 +02:00
Uwe Kleine-König
ce816fa88c Kconfig: rename HAS_IOPORT to HAS_IOPORT_MAP
If the renamed symbol is defined lib/iomap.c implements ioport_map and
ioport_unmap and currently (nearly) all platforms define the port
accessor functions outb/inb and friend unconditionally.  So
HAS_IOPORT_MAP is the better name for this.

Consequently NO_IOPORT is renamed to NO_IOPORT_MAP.

The motivation for this change is to reintroduce a symbol HAS_IOPORT
that signals if outb/int et al are available.  I will address that at
least one merge window later though to keep surprises to a minimum and
catch new introductions of (HAS|NO)_IOPORT.

The changes in this commit were done using:

	$ git grep -l -E '(NO|HAS)_IOPORT' | xargs perl -p -i -e 's/\b((?:CONFIG_)?(?:NO|HAS)_IOPORT)\b/$1_MAP/'

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-07 16:36:11 -07:00
Linus Torvalds
18a1a7a1d8 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile updates from Chris Metcalf:
 "These fix a few stray build issues seen in linux-next, and also add
  the minimal required support for perf to tilegx"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: remove unused variable 'devcap'
  tile: Fix vDSO compilation issue with allyesconfig
  perf tools: Allow building for tile
  tile/perf: Support perf_events on tilegx and tilepro
  tile: Enable NMIs on return from handle_nmi() without errors
  tile: Add support for handling PMC hardware
  tile: don't use __get_cpu_var() with structure-typed arguments
  tile: avoid overflow in ns2cycles
2014-04-06 08:11:57 -07:00
Chris Metcalf
5eb0bdf844 arch/tile: remove unused variable 'devcap'
Commit 503275bf37 removed the use of the variable but not
the variable itself.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-04-04 13:11:40 -04:00
Kerry Sheh
603eb2cdee tile: Fix vDSO compilation issue with allyesconfig
make allyesconfig give the following build error on tile:
 tilegx-linux-gcc: error: arch/tile/kernel/vdso/vgettimeofday32.o: No such file or directory
 tilegx-linux-objcopy: 'arch/tile/kernel/vdso/vdso32.so.dbg': No such file or directory

In case with CONFIG_MODVERSIONS, cmd_cc_o_c generate .tmp_<file>.o from
<file>.c only. Fix it by execute rule_cc_o_c instead.

Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kerry Sheh <ksheh@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-04-04 13:03:44 -04:00
Linus Torvalds
68114e5eb8 Most of the changes were largely clean ups, and some documentation.
But there were a few features that were added.
 
 Uprobes now work with event triggers and multi buffers.
 Uprobes have support under ftrace and perf.
 
 The big feature is that the function tracer can now be used within the
 multi buffer instances. That is, you can now trace some functions
 in one buffer, others in another buffer, all functions in a third buffer
 and so on. They are basically agnostic from each other. This only
 works for the function tracer and not for the function graph trace,
 although you can have the function graph tracer running in the top level
 buffer (or any tracer for that matter) and have different function tracing
 going on in the sub buffers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTOthtAAoJEKQekfcNnQGu5c8H/Ana/U+0tmksp1dbHkRHsKSH
 +Fsv4Jeu8gf1NaFKHEhkUTcFtnzE6qAPV2VCrcJwXbhAhhwZm+LjrnWdoy3215S3
 cQW4LftLEonh2cM36Cos74TulMEYN6XmL6dQZV+CILKQkDrWU4qJjQ64okXEkqrd
 9iG3p/mSXyvJcmnyg61ALnMOhZDLsXY3djBhWBPhiTPGS6BRb9zh4Pmw6Zv0n2rJ
 U93Gt/3AQrv1ybu73dUxqP0abp60oXOiWoF/R2jcbKqIM+K9RPJX79unCV3jq3u9
 f+6jMlB9PgAMqQj6ihJdwxKDDuzwyrVdEPnsgvl4jarCBCtVVwhKedBaKN/KS8k=
 =HdXY
 -----END PGP SIGNATURE-----

Merge tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing updates from Steven Rostedt:
 "Most of the changes were largely clean ups, and some documentation.
  But there were a few features that were added:

  Uprobes now work with event triggers and multi buffers and have
  support under ftrace and perf.

  The big feature is that the function tracer can now be used within the
  multi buffer instances.  That is, you can now trace some functions in
  one buffer, others in another buffer, all functions in a third buffer
  and so on.  They are basically agnostic from each other.  This only
  works for the function tracer and not for the function graph trace,
  although you can have the function graph tracer running in the top
  level buffer (or any tracer for that matter) and have different
  function tracing going on in the sub buffers"

* tag 'trace-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
  tracing: Add BUG_ON when stack end location is over written
  tracepoint: Remove unused API functions
  Revert "tracing: Move event storage for array from macro to standalone function"
  ftrace: Constify ftrace_text_reserved
  tracepoints: API doc update to tracepoint_probe_register() return value
  tracepoints: API doc update to data argument
  ftrace: Fix compilation warning about control_ops_free
  ftrace/x86: BUG when ftrace recovery fails
  ftrace: Warn on error when modifying ftrace function
  ftrace: Remove freelist from struct dyn_ftrace
  ftrace: Do not pass data to ftrace_dyn_arch_init
  ftrace: Pass retval through return in ftrace_dyn_arch_init()
  ftrace: Inline the code from ftrace_dyn_table_alloc()
  ftrace: Cleanup of global variables ftrace_new_pgs and ftrace_update_cnt
  tracing: Evaluate len expression only once in __dynamic_array macro
  tracing: Correctly expand len expressions from __dynamic_array macro
  tracing/module: Replace include of tracepoint.h with jump_label.h in module.h
  tracing: Fix event header migrate.h to include tracepoint.h
  tracing: Fix event header writeback.h to include tracepoint.h
  tracing: Warn if a tracepoint is not set via debugfs
  ...
2014-04-03 10:26:31 -07:00
Linus Torvalds
4b1779c2cf PCI changes for the v3.15 merge window:
Enumeration
     - Increment max correctly in pci_scan_bridge() (Andreas Noever)
     - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
     - Assign CardBus bus number only during the second pass (Andreas Noever)
     - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
     - Make sure bus number resources stay within their parents bounds (Andreas Noever)
     - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
     - Check for child busses which use more bus numbers than allocated (Andreas Noever)
     - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
     - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
     - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
     - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
     - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
     - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)
 
   NUMA
     - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
     - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
     - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
     - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
     - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
     - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
     - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
     - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)
 
   Resource management
     - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
     - Add resource_contains() (Bjorn Helgaas)
     - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
     - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
     - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
     - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
     - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
     - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
     - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
     - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
     - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
     - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
     - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
     - Set type in __request_region() (Bjorn Helgaas)
     - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
     - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
     - Log IDE resource quirk in dmesg (Bjorn Helgaas)
     - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)
 
   PCI device hotplug
     - Make check_link_active() non-static (Rajat Jain)
     - Use link change notifications for hot-plug and removal (Rajat Jain)
     - Enable link state change notifications (Rajat Jain)
     - Don't disable the link permanently during removal (Rajat Jain)
     - Don't check adapter or latch status while disabling (Rajat Jain)
     - Disable link notification across slot reset (Rajat Jain)
     - Ensure very fast hotplug events are also processed (Rajat Jain)
     - Add hotplug_lock to serialize hotplug events (Rajat Jain)
     - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
     - Don't turn slot off when hot-added device already exists (Yijing Wang)
 
   MSI
     - Keep pci_enable_msi() documentation (Alexander Gordeev)
     - ahci: Fix broken single MSI fallback (Alexander Gordeev)
     - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
     - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
     - Fix leak of msi_attrs (Greg Kroah-Hartman)
     - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)
 
   Virtualization
     - Device-specific ACS support (Alex Williamson)
 
   Freescale i.MX6
     - Wait for retraining (Marek Vasut)
 
   Marvell MVEBU
     - Use Device ID and revision from underlying endpoint (Andrew Lunn)
     - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
     - Call request_resource() on the apertures (Jason Gunthorpe)
     - Fix potential issue in range parsing (Jean-Jacques Hiblot)
 
   Renesas R-Car
     - Check platform_get_irq() return code (Ben Dooks)
     - Add error interrupt handling (Ben Dooks)
     - Fix bridge logic configuration accesses (Ben Dooks)
     - Register each instance independently (Magnus Damm)
     - Break out window size handling (Magnus Damm)
     - Make the Kconfig dependencies more generic (Magnus Damm)
 
   Synopsys DesignWare
     - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)
 
   Miscellaneous
     - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
     - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
     - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
     - Clean up par-arch object file list (Liviu Dudau)
     - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
     - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
     - Fix pci_bus_b() build failure (Paul Gortmaker)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJTOdAZAAoJEFmIoMA60/r8VYUQALRrReyMBk3pjRt/fKIX4Kwi
 ydSo/YJeeKTN8K93fLw8bb8bdPItJScJFTfEa4Q2SpZezR/ecGXLowisy0BBaPHK
 qtOyB8EqjkLS17GfyecIe9Nd2SIAI2De/0bchK3kDtIX1YlZB/k/tD3eCPMHDnnl
 m8c5kAHKPQYd8g01I+S8nrtGHk/A33grfYpJXPZbcqyhE0lWU3SI8KDAGbcKzNHE
 23Do0yNyd4nHIdixWlhETcNvzHn35Q/O38JJwW9Mf1aI9gusYuml6GFefCgu/iov
 lxqp3CEW7iPZgQEgNbrQ0HzWn/durL2Trd6S/Yh6f2xbm1LGYKWh3LZUFLd3AQDd
 INEpUgKsyb//nF3dtiyGnZlp0QykoqFyLo2AEDrb+ILTd4up5DeRY/m1UpjAXR5p
 QicBmrDksHrSivPmMZwLx1DFQYKjQbdx5lOqy9hQM/Jmsr+N3/l7QBrbQWXks3JZ
 NNAyn4RZHQB7UDQS/MmVPArs+JK5qaEDQD57QuOTlqgP19VY9C9E/l/aEqefjdFo
 XOAm7CwGpB/iBAkIbE6ROEDiJArigRVHEfxLYeE/jtGOdRDCD1deWk+g3S8DWD7m
 ZxWSgIVB00PMAmomczdg59YVFBhocgwPUa8/cw6yqzx2QKP4mWXIFZ/Sjau5I3tn
 WWoxXlUirZfTJc29XnVy
 =3mNS
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Enumeration
   - Increment max correctly in pci_scan_bridge() (Andreas Noever)
   - Clarify the "scan anyway" comment in pci_scan_bridge() (Andreas Noever)
   - Assign CardBus bus number only during the second pass (Andreas Noever)
   - Use request_resource_conflict() instead of insert_ for bus numbers (Andreas Noever)
   - Make sure bus number resources stay within their parents bounds (Andreas Noever)
   - Remove pci_fixup_parent_subordinate_busnr() (Andreas Noever)
   - Check for child busses which use more bus numbers than allocated (Andreas Noever)
   - Don't scan random busses in pci_scan_bridge() (Andreas Noever)
   - x86: Drop pcibios_scan_root() check for bus already scanned (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_with_sysdata() (Bjorn Helgaas)
   - x86: Use pcibios_scan_root() instead of pci_scan_bus_on_node() (Bjorn Helgaas)
   - x86: Merge pci_scan_bus_on_node() into pcibios_scan_root() (Bjorn Helgaas)
   - x86: Drop return value of pcibios_scan_root() (Bjorn Helgaas)

  NUMA
   - x86: Add x86_pci_root_bus_node() to look up NUMA node from PCI bus (Bjorn Helgaas)
   - x86: Use x86_pci_root_bus_node() instead of get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Remove mp_bus_to_node[], set_mp_bus_to_node(), get_mp_bus_to_node() (Bjorn Helgaas)
   - x86: Use NUMA_NO_NODE, not -1, for unknown node (Bjorn Helgaas)
   - x86: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ia64: Use NUMA_NO_NODE, not MAX_NUMNODES, for unknown node (Bjorn Helgaas)
   - ia64: Remove acpi_get_pxm() usage (Bjorn Helgaas)
   - ACPI: Fix acpi_get_node() prototype (Bjorn Helgaas)

  Resource management
   - i2o: Fix and refactor PCI space allocation (Bjorn Helgaas)
   - Add resource_contains() (Bjorn Helgaas)
   - Add %pR support for IORESOURCE_UNSET (Bjorn Helgaas)
   - Mark resources as IORESOURCE_UNSET if we can't assign them (Bjorn Helgaas)
   - Don't clear IORESOURCE_UNSET when updating BAR (Bjorn Helgaas)
   - Check IORESOURCE_UNSET before updating BAR (Bjorn Helgaas)
   - Don't try to claim IORESOURCE_UNSET resources (Bjorn Helgaas)
   - Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit (Bjorn Helgaas)
   - Don't enable decoding if BAR hasn't been assigned an address (Bjorn Helgaas)
   - Add "weak" generic pcibios_enable_device() implementation (Bjorn Helgaas)
   - alpha, microblaze, sh, sparc, tile: Use default pcibios_enable_device() (Bjorn Helgaas)
   - s390: Use generic pci_enable_resources() (Bjorn Helgaas)
   - Don't check resource_size() in pci_bus_alloc_resource() (Bjorn Helgaas)
   - Set type in __request_region() (Bjorn Helgaas)
   - Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region() (Bjorn Helgaas)
   - Change pci_bus_alloc_resource() type_mask to unsigned long (Bjorn Helgaas)
   - Log IDE resource quirk in dmesg (Bjorn Helgaas)
   - Revert "[PATCH] Insert GART region into resource map" (Bjorn Helgaas)

  PCI device hotplug
   - Make check_link_active() non-static (Rajat Jain)
   - Use link change notifications for hot-plug and removal (Rajat Jain)
   - Enable link state change notifications (Rajat Jain)
   - Don't disable the link permanently during removal (Rajat Jain)
   - Don't check adapter or latch status while disabling (Rajat Jain)
   - Disable link notification across slot reset (Rajat Jain)
   - Ensure very fast hotplug events are also processed (Rajat Jain)
   - Add hotplug_lock to serialize hotplug events (Rajat Jain)
   - Remove a non-existent card, regardless of "surprise" capability (Rajat Jain)
   - Don't turn slot off when hot-added device already exists (Yijing Wang)

  MSI
   - Keep pci_enable_msi() documentation (Alexander Gordeev)
   - ahci: Fix broken single MSI fallback (Alexander Gordeev)
   - ahci, vfio: Use pci_enable_msi_range() (Alexander Gordeev)
   - Check kmalloc() return value, fix leak of name (Greg Kroah-Hartman)
   - Fix leak of msi_attrs (Greg Kroah-Hartman)
   - Fix pci_msix_vec_count() htmldocs failure (Masanari Iida)

  Virtualization
   - Device-specific ACS support (Alex Williamson)

  Freescale i.MX6
   - Wait for retraining (Marek Vasut)

  Marvell MVEBU
   - Use Device ID and revision from underlying endpoint (Andrew Lunn)
   - Fix incorrect size for PCI aperture resources (Jason Gunthorpe)
   - Call request_resource() on the apertures (Jason Gunthorpe)
   - Fix potential issue in range parsing (Jean-Jacques Hiblot)

  Renesas R-Car
   - Check platform_get_irq() return code (Ben Dooks)
   - Add error interrupt handling (Ben Dooks)
   - Fix bridge logic configuration accesses (Ben Dooks)
   - Register each instance independently (Magnus Damm)
   - Break out window size handling (Magnus Damm)
   - Make the Kconfig dependencies more generic (Magnus Damm)

  Synopsys DesignWare
   - Fix RC BAR to be single 64-bit non-prefetchable memory (Mohit Kumar)

  Miscellaneous
   - Remove unused SR-IOV VF Migration support (Bjorn Helgaas)
   - Enable INTx if BIOS left them disabled (Bjorn Helgaas)
   - Fix hex vs decimal typo in cpqhpc_probe() (Dan Carpenter)
   - Clean up par-arch object file list (Liviu Dudau)
   - Set IORESOURCE_ROM_SHADOW only for the default VGA device (Sander Eikelenboom)
   - ACPI, ARM, drm, powerpc, pcmcia, PCI: Use list_for_each_entry() for bus traversal (Yijing Wang)
   - Fix pci_bus_b() build failure (Paul Gortmaker)"

* tag 'pci-v3.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (108 commits)
  Revert "[PATCH] Insert GART region into resource map"
  PCI: Log IDE resource quirk in dmesg
  PCI: Change pci_bus_alloc_resource() type_mask to unsigned long
  PCI: Check all IORESOURCE_TYPE_BITS in pci_bus_alloc_from_region()
  resources: Set type in __request_region()
  PCI: Don't check resource_size() in pci_bus_alloc_resource()
  s390/PCI: Use generic pci_enable_resources()
  tile PCI RC: Use default pcibios_enable_device()
  sparc/PCI: Use default pcibios_enable_device() (Leon only)
  sh/PCI: Use default pcibios_enable_device()
  microblaze/PCI: Use default pcibios_enable_device()
  alpha/PCI: Use default pcibios_enable_device()
  PCI: Add "weak" generic pcibios_enable_device() implementation
  PCI: Don't enable decoding if BAR hasn't been assigned an address
  PCI: Enable INTx in pci_reenable_device() only when MSI/MSI-X not enabled
  PCI: Mark 64-bit resource as IORESOURCE_UNSET if we only support 32-bit
  PCI: Don't try to claim IORESOURCE_UNSET resources
  PCI: Check IORESOURCE_UNSET before updating BAR
  PCI: Don't clear IORESOURCE_UNSET when updating BAR
  PCI: Mark resources as IORESOURCE_UNSET if we can't assign them
  ...

Conflicts:
	arch/x86/include/asm/topology.h
	drivers/ata/ahci.c
2014-04-01 15:14:04 -07:00
Bjorn Helgaas
05d58f6075 tile PCI RC: Use default pcibios_enable_device()
We don't need anything arch-specific in pcibios_enable_device(), so drop
the arch implementation and use the default generic one.

Note: pci_enable_resources() checks that r->parent is non-NULL, which
basically checks that pci_claim_resource() or request_resource() has been
called for each BAR.  I don't see where that happens for tile, but this
patch doesn't change that behavior, so if it worked before, it should still
work.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2014-03-19 15:00:15 -06:00
Zhigang Lu
8d61dd7d3e tile/perf: Support perf_events on tilegx and tilepro
Add perf support for tile architecture.

Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-03-07 11:19:48 -05:00
Zhigang Lu
ba67823163 tile: Enable NMIs on return from handle_nmi() without errors
NMI interrupts mask ALL interrupts before calling the handler,
so we need to unmask NMIs according to the value handle_nmi() returns.
If it returns zero, the NMIs should be re-enabled; if it returns
a non-zero error, the NMIs should be disabled.

Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-03-07 11:19:48 -05:00
Zhigang Lu
8e3441ebab tile: Add support for handling PMC hardware
The PMC module is used by perf_events, oprofile and watchdogs.

Signed-off-by: Zhigang Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-03-07 11:19:47 -05:00
Jiri Slaby
3a36cb11ca ftrace: Do not pass data to ftrace_dyn_arch_init
As the data parameter is not really used by any ftrace_dyn_arch_init,
remove that from ftrace_dyn_arch_init. This also removes the addr
local variable from ftrace_init which is now unused.

Note the documentation was imprecise as it did not suggest to set
(*data) to 0.

Link: http://lkml.kernel.org/r/1393268401-24379-4-git-send-email-jslaby@suse.cz

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:14 -05:00
Jiri Slaby
af64a7cb09 ftrace: Pass retval through return in ftrace_dyn_arch_init()
No architecture uses the "data" parameter in ftrace_dyn_arch_init() in any
way, it just sets the value to 0. And this is used as a return value
in the caller -- ftrace_init, which just checks the retval against
zero.

Note there is also "return 0" in every ftrace_dyn_arch_init.  So it is
enough to check the retval and remove all the indirect sets of data on
all archs.

Link: http://lkml.kernel.org/r/1393268401-24379-3-git-send-email-jslaby@suse.cz

Cc: linux-arch@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2014-03-07 10:06:13 -05:00
Chris Metcalf
2e285458e6 tile: don't use __get_cpu_var() with structure-typed arguments
This no longer works with the new per-cpu infrastructure.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-03-06 15:31:59 -05:00
Henrik Austad
767f30210b tile: avoid overflow in ns2cycles
In commit 4cecf6d401 ("sched, x86: Avoid unnecessary overflow in
sched_clock") and in recent patch "clocksource: avoid unnecessary
overflow in cyclecounter_cyc2ns()" https://lkml.org/lkml/2014/3/4/17,
the mult-shift approach is replaced by 2 steps to avoid storing a large,
intermediate value that could overflow.

arch/tile/kernel/time.c has a similar pattern in cycles2ns, and this
copies the same pattern in this function

CC: John Stultz <johnstul@us.ibm.com>
CC: Mike Galbraith <bitbucket@online.de>
CC: Salman Qazi <sqazi@google.com>
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2014-03-06 11:53:12 -05:00
Tim Chen
ddf1d169c0 locking/mcs: Allow architecture specific asm files to be used for contended case
This patch allows each architecture to add its specific assembly optimized
arch_mcs_spin_lock_contended and arch_mcs_spinlock_uncontended for
MCS lock and unlock functions.

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: AswinChandramouleeswaran <aswin@hp.com>
Cc: George Spelvin <linux@horizon.com>
Cc: Rik vanRiel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: MichelLespinasse <walken@google.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Figo.zhang" <figo1802@gmail.com>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1390347382.3138.67.camel@schen9-DESK
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09 21:18:52 +01:00
Tim Chen
b119fa61d4 locking/mcs: Order the header files in Kbuild of each architecture in alphabetical order
We perform a clean up of the Kbuid files in each architecture.
We order the files in each Kbuild in alphabetical order
by running the below script.

for i in arch/*/include/asm/Kbuild
do
        cat $i | gawk '/^generic-y/ {
                i = 3;
                do {
                        for (; i <= NF; i++) {
                                if ($i == "\\") {
                                        getline;
                                        i = 1;
                                        continue;
                                }
                                if ($i != "")
                                        hdr[$i] = $i;
                        }
                        break;
                } while (1);
                next;
        }
        // {
                print $0;
        }
        END {
                n = asort(hdr);
                for (i = 1; i <= n; i++)
                        print "generic-y += " hdr[i];
        }' > ${i}.sorted;
        mv ${i}.sorted $i;
done

Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew R Wilcox <matthew.r.wilcox@intel.com>
Cc: AswinChandramouleeswaran <aswin@hp.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: "Paul E.McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: "Figo.zhang" <figo1802@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Waiman Long <waiman.long@hp.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: George Spelvin <linux@horizon.com>
Cc: MichelLespinasse <walken@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Davidlohr Bueso <davidlohr.bueso@hp.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
[ Fixed build bug. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-02-09 21:17:50 +01:00
Heiko Carstens
5a5e75f471 tile: remove compat_sys_lookup_dcookie declaration to fix compile error
With commit d8d14bd09c ("fs/compat: fix lookup_dcookie() parameter
handling") I changed the type of the len parameter of the
lookup_dcookie() syscall.

However I missed that there was still a stale declaration in
arch/tile/..  which now causes a compile error on tile:

  In file included from fs/dcookies.c:28:0:
  include/linux/compat.h:425:17: error: conflicting types for 'compat_sys_lookup_dcookie'
  fs/dcookies.c:207:1: error: conflicting types for 'compat_sys_lookup_dcookie'

Simply remove the declaration in the tile architecture, which is only a
leftover from before the different compat lookup_dcookie() versions have
been merged.  The correct declaration is now in include/linux/compat.h

The build error was reported by Fenguang's build bot.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-01 10:55:15 -08:00
Linus Torvalds
4ba9920e5e Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:

 1) BPF debugger and asm tool by Daniel Borkmann.

 2) Speed up create/bind in AF_PACKET, also from Daniel Borkmann.

 3) Correct reciprocal_divide and update users, from Hannes Frederic
    Sowa and Daniel Borkmann.

 4) Currently we only have a "set" operation for the hw timestamp socket
    ioctl, add a "get" operation to match.  From Ben Hutchings.

 5) Add better trace events for debugging driver datapath problems, also
    from Ben Hutchings.

 6) Implement auto corking in TCP, from Eric Dumazet.  Basically, if we
    have a small send and a previous packet is already in the qdisc or
    device queue, defer until TX completion or we get more data.

 7) Allow userspace to manage ipv6 temporary addresses, from Jiri Pirko.

 8) Add a qdisc bypass option for AF_PACKET sockets, from Daniel
    Borkmann.

 9) Share IP header compression code between Bluetooth and IEEE802154
    layers, from Jukka Rissanen.

10) Fix ipv6 router reachability probing, from Jiri Benc.

11) Allow packets to be captured on macvtap devices, from Vlad Yasevich.

12) Support tunneling in GRO layer, from Jerry Chu.

13) Allow bonding to be configured fully using netlink, from Scott
    Feldman.

14) Allow AF_PACKET users to obtain the VLAN TPID, just like they can
    already get the TCI.  From Atzm Watanabe.

15) New "Heavy Hitter" qdisc, from Terry Lam.

16) Significantly improve the IPSEC support in pktgen, from Fan Du.

17) Allow ipv4 tunnels to cache routes, just like sockets.  From Tom
    Herbert.

18) Add Proportional Integral Enhanced packet scheduler, from Vijay
    Subramanian.

19) Allow openvswitch to mmap'd netlink, from Thomas Graf.

20) Key TCP metrics blobs also by source address, not just destination
    address.  From Christoph Paasch.

21) Support 10G in generic phylib.  From Andy Fleming.

22) Try to short-circuit GRO flow compares using device provided RX
    hash, if provided.  From Tom Herbert.

The wireless and netfilter folks have been busy little bees too.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2064 commits)
  net/cxgb4: Fix referencing freed adapter
  ipv6: reallocate addrconf router for ipv6 address when lo device up
  fib_frontend: fix possible NULL pointer dereference
  rtnetlink: remove IFLA_BOND_SLAVE definition
  rtnetlink: remove check for fill_slave_info in rtnl_have_link_slave_info
  qlcnic: update version to 5.3.55
  qlcnic: Enhance logic to calculate msix vectors.
  qlcnic: Refactor interrupt coalescing code for all adapters.
  qlcnic: Update poll controller code path
  qlcnic: Interrupt code cleanup
  qlcnic: Enhance Tx timeout debugging.
  qlcnic: Use bool for rx_mac_learn.
  bonding: fix u64 division
  rtnetlink: add missing IFLA_BOND_AD_INFO_UNSPEC
  sfc: Use the correct maximum TX DMA ring size for SFC9100
  Add Shradha Shah as the sfc driver maintainer.
  net/vxlan: Share RX skb de-marking and checksum checks with ovs
  tulip: cleanup by using ARRAY_SIZE()
  ip_tunnel: clear IPCB in ip_tunnel_xmit() in case dst_link_failure() is called
  net/cxgb4: Don't retrieve stats during recovery
  ...
2014-01-25 11:17:34 -08:00
Mark Salter
8b49233fd7 tile: use generic fixmap.h
Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-23 16:36:54 -08:00
Peter Zijlstra
93ea02bb84 arch: Clean up asm/barrier.h implementations using asm-generic/barrier.h
We're going to be adding a few new barrier primitives, and in order to
avoid endless duplication make more agressive use of
asm-generic/barrier.h.

Change the asm-generic/barrier.h such that it allows partial barrier
definitions and fills out the rest with defaults.

There are a few architectures (m32r, m68k) that could probably
do away with their barrier.h file entirely but are kept for now due to
their unconventional nop() implementation.

Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Michael Ellerman <michael@ellerman.id.au>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Victor Kaplansky <VICTORK@il.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131213150640.846368594@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-01-12 10:37:15 +01:00
David S. Miller
e3fec2f74f lib: Add missing arch generic-y entries for asm-generic/hash.h
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-17 21:26:19 -05:00
Linus Torvalds
4007162647 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq cleanups from Ingo Molnar:
 "This is a multi-arch cleanup series from Thomas Gleixner, which we
  kept to near the end of the merge window, to not interfere with
  architecture updates.

  This series (motivated by the -rt kernel) unifies more aspects of IRQ
  handling and generalizes PREEMPT_ACTIVE"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  preempt: Make PREEMPT_ACTIVE generic
  sparc: Use preempt_schedule_irq
  ia64: Use preempt_schedule_irq
  m32r: Use preempt_schedule_irq
  hardirq: Make hardirq bits generic
  m68k: Simplify low level interrupt handling code
  genirq: Prevent spurious detection for unconditionally polled interrupts
2013-11-19 10:40:00 -08:00
Christoph Hellwig
0a06ff068f kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS
We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:22 +09:00
Kirill A. Shutemov
76b3aec332 tile: handle pgtable_page_ctor() fail
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:19 +09:00
Linus Torvalds
2f466d33f5 PCI changes for the v3.13 merge window:
Resource management
     - Fix host bridge window coalescing (Alexey Neyman)
     - Pass type, width, and prefetchability for window alignment (Wei Yang)
 
   PCI device hotplug
     - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)
 
   Power management
     - Remove pci_pm_complete() (Liu Chuansheng)
 
   MSI
     - Fail initialization if device is not in PCI_D0 (Yijing Wang)
 
   MPS (Max Payload Size)
     - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
     - Use pcie_set_readrq() to simplify code (Yijing Wang)
     - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)
 
   SR-IOV
     - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
     - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)
 
   Virtualization
     - Add x86 MSI masking ops (Konrad Rzeszutek Wilk)
 
   Freescale i.MX6
     - Support i.MX6 PCIe controller (Sean Cross)
     - Increase link startup timeout (Marek Vasut)
     - Probe PCIe in fs_initcall() (Marek Vasut)
     - Fix imprecise abort handler (Tim Harvey)
     - Remove redundant of_match_ptr (Sachin Kamat)
 
   Renesas R-Car
     - Support Gen2 internal PCIe controller (Valentine Barshak)
 
   Samsung Exynos
     - Add MSI support (Jingoo Han)
     - Turn off power when link fails (Jingoo Han)
     - Add Jingoo Han as maintainer (Jingoo Han)
     - Add clk_disable_unprepare() on error path (Wei Yongjun)
     - Remove redundant of_match_ptr (Sachin Kamat)
 
   Synopsys DesignWare
     - Add irq_create_mapping() (Pratyush Anand)
     - Add header guards (Seungwon Jeon)
 
   Miscellaneous
     - Enable native PCIe services by default on non-ACPI (Andrew Murray)
     - Cleanup _OSC usage and messages (Bjorn Helgaas)
     - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
     - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
     - Remove unused pci_mem_start (Myron Stowe)
     - Make sysfs functions static (Sachin Kamat)
     - Warn on invalid return from driver probe (Stephen M. Cameron)
     - Remove Intel Haswell D3 delays (Todd E Brandt)
     - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
     - Use pci_is_pcie() to simplify code (Yijing Wang)
     - Use PCIe capability accessors to simplify code (Yijing Wang)
     - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
     - Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
     - Simplify sysfs CPU affinity implementation (Yijing Wang))
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSgUzsAAoJEFmIoMA60/r8wmsQAJhwmtkUYR2L4T1g9smAyjJz
 bLm5zoC6WdywFcbTpTBfsTrS1CHIQG5akRgkEXGdr99epiho5F2lwmagWsUR4ijL
 39Qn3knAUMgtNjoVXXI106h/DfTyxSmkZBfih2AQFyWobJq+0kg7hjQQA3+836b4
 8ssWr1+NSl6JJTqYQ0Paw1kSqvvYoXsu5rWFEfCHk8D0s/1bvr5ldAUpk2jTg93I
 uo9/5+O264yt1YoKZOMqAMZLUfd5DaWY1mV3yeF0Uauy1pBmol5csE8ckqJPDrES
 PRdJT1+PhBeLYWcgXANOBZsW58ddxA0pQ5jQV6VJHQWsm5cE82OBpYJf6xUZ2moV
 o6DZ0KRnCPVA3NllYYR16H+wbMfADwwO83QoA+QTIZJy/WgpDH3Cst+m8KePGqbL
 uFgDdXSws9Bs1BCFs7bfYzAM3OdkBFnn+ac7JoPXKP5ibgAp9nDlurgK2r90zRnp
 j15vHMx0mV+e8B8/iwiW5eRtg7NoCHYiNfFy7JalOlsPmYr2KFazBVKclp13Hng7
 fe/Jy6X4UhWoQPdqsy4ftvSQb0gm1MClxFJeZ3VAt6LY9j8OP6S/Vdf6lpAL85KR
 lAQoQzB+lOhTPdXxFY2xgGkITkqPDOQMjPfowYUYFwybqBuG6BHXZPJobL+niBlb
 Nh+M2WlUUA9Z3V6rWJB6
 =CTPk
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:
 "Resource management
    - Fix host bridge window coalescing (Alexey Neyman)
    - Pass type, width, and prefetchability for window alignment (Wei Yang)

  PCI device hotplug
    - Convert acpiphp, acpiphp_ibm to dynamic debug (Lan Tianyu)

  Power management
    - Remove pci_pm_complete() (Liu Chuansheng)

  MSI
    - Fail initialization if device is not in PCI_D0 (Yijing Wang)

  MPS (Max Payload Size)
    - Use pcie_get_mps() and pcie_set_mps() to simplify code (Yijing Wang)
    - Use pcie_set_readrq() to simplify code (Yijing Wang)
    - Use cached pci_dev->pcie_mpss to simplify code (Yijing Wang)

  SR-IOV
    - Enable upstream bridges even for VFs on virtual buses (Bjorn Helgaas)
    - Use pci_is_root_bus() to avoid catching virtual buses (Wei Yang)

  Virtualization
    - Add x86 MSI masking ops (Konrad Rzeszutek Wilk)

  Freescale i.MX6
    - Support i.MX6 PCIe controller (Sean Cross)
    - Increase link startup timeout (Marek Vasut)
    - Probe PCIe in fs_initcall() (Marek Vasut)
    - Fix imprecise abort handler (Tim Harvey)
    - Remove redundant of_match_ptr (Sachin Kamat)

  Renesas R-Car
    - Support Gen2 internal PCIe controller (Valentine Barshak)

  Samsung Exynos
    - Add MSI support (Jingoo Han)
    - Turn off power when link fails (Jingoo Han)
    - Add Jingoo Han as maintainer (Jingoo Han)
    - Add clk_disable_unprepare() on error path (Wei Yongjun)
    - Remove redundant of_match_ptr (Sachin Kamat)

  Synopsys DesignWare
    - Add irq_create_mapping() (Pratyush Anand)
    - Add header guards (Seungwon Jeon)

  Miscellaneous
    - Enable native PCIe services by default on non-ACPI (Andrew Murray)
    - Cleanup _OSC usage and messages (Bjorn Helgaas)
    - Remove pcibios_last_bus boot option on non-x86 (Bjorn Helgaas)
    - Convert bus code to use bus_, drv_, and dev_groups (Greg Kroah-Hartman)
    - Remove unused pci_mem_start (Myron Stowe)
    - Make sysfs functions static (Sachin Kamat)
    - Warn on invalid return from driver probe (Stephen M. Cameron)
    - Remove Intel Haswell D3 delays (Todd E Brandt)
    - Call pci_set_master() in core if driver doesn't do it (Yinghai Lu)
    - Use pci_is_pcie() to simplify code (Yijing Wang)
    - Use PCIe capability accessors to simplify code (Yijing Wang)
    - Use cached pci_dev->pcie_cap to simplify code (Yijing Wang)
    - Removed unused "is_pcie" from struct pci_dev (Yijing Wang)
    - Simplify sysfs CPU affinity implementation (Yijing Wang)"

* tag 'pci-v3.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (79 commits)
  PCI: Enable upstream bridges even for VFs on virtual buses
  PCI: Add pci_upstream_bridge()
  PCI: Add x86_msi.msi_mask_irq() and msix_mask_irq()
  PCI: Warn on driver probe return value greater than zero
  PCI: Drop warning about drivers that don't use pci_set_master()
  PCI: Workaround missing pci_set_master in pci drivers
  powerpc/pci: Use pci_is_pcie() to simplify code [fix]
  PCI: Update pcie_ports 'auto' behavior for non-ACPI platforms
  PCI: imx6: Probe the PCIe in fs_initcall()
  PCI: Add R-Car Gen2 internal PCI support
  PCI: imx6: Remove redundant of_match_ptr
  PCI: Report pci_pme_active() kmalloc failure
  mn10300/PCI: Remove useless pcibios_last_bus
  frv/PCI: Remove pcibios_last_bus
  PCI: imx6: Increase link startup timeout
  PCI: exynos: Remove redundant of_match_ptr
  PCI: imx6: Fix imprecise abort handler
  PCI: Fail MSI/MSI-X initialization if device is not in PCI_D0
  PCI: imx6: Remove redundant dev_err() in imx6_pcie_probe()
  x86/PCI: Coalesce multiple overlapping host bridge windows
  ...
2013-11-14 14:02:00 +09:00
Thomas Gleixner
00d1a39e69 preempt: Make PREEMPT_ACTIVE generic
No point in having this bit defined by architecture.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130917183629.090698799@linutronix.de
2013-11-13 20:21:47 +01:00
Thomas Gleixner
54197e43a4 hardirq: Make hardirq bits generic
There is no reason for per arch hardirq bits. Make them all generic

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130917183628.534494408@linutronix.de
2013-11-13 20:21:46 +01:00
Linus Torvalds
9bc9ccd7db Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "All kinds of stuff this time around; some more notable parts:

   - RCU'd vfsmounts handling
   - new primitives for coredump handling
   - files_lock is gone
   - Bruce's delegations handling series
   - exportfs fixes

  plus misc stuff all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (101 commits)
  ecryptfs: ->f_op is never NULL
  locks: break delegations on any attribute modification
  locks: break delegations on link
  locks: break delegations on rename
  locks: helper functions for delegation breaking
  locks: break delegations on unlink
  namei: minor vfs_unlink cleanup
  locks: implement delegations
  locks: introduce new FL_DELEG lock flag
  vfs: take i_mutex on renamed file
  vfs: rename I_MUTEX_QUOTA now that it's not used for quotas
  vfs: don't use PARENT/CHILD lock classes for non-directories
  vfs: pull ext4's double-i_mutex-locking into common code
  exportfs: fix quadratic behavior in filehandle lookup
  exportfs: better variable name
  exportfs: move most of reconnect_path to helper function
  exportfs: eliminate unused "noprogress" counter
  exportfs: stop retrying once we race with rename/remove
  exportfs: clear DISCONNECTED on all parents sooner
  exportfs: more detailed comment for path_reconnect
  ...
2013-11-13 15:34:18 +09:00
Al Viro
ce39596048 constify copy_siginfo_to_user{,32}()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-11-09 00:16:29 -05:00
Ingo Molnar
ec0ad3d01f Merge branch 'core/urgent' into sched/core
Merge in asm goto fix, to be able to apply the asm/rmwcc.h fix.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-11 07:39:37 +02:00
Andy Shevchenko
0cc96a7450 arch: tile: re-use kbasename() helper
kbasename() returns the filename part of a pathname.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2013-09-30 10:34:46 -04:00
Chris Metcalf
f862eefec0 tile: use a more conservative __my_cpu_offset in CONFIG_PREEMPT
It turns out the kernel relies on barrier() to force a reload of the
percpu offset value.  Since we can't easily modify the definition of
barrier() to include "tp" as an output register, we instead provide a
definition of __my_cpu_offset as extended assembly that includes a fake
stack read to hazard against barrier(), forcing gcc to know that it
must reread "tp" and recompute anything based on "tp" after a barrier.

This fixes observed hangs in the slub allocator when we are looping
on a percpu cmpxchg_double.

A similar fix for ARMv7 was made in June in change 509eb76ebf.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-30 10:34:41 -04:00
Chris Metcalf
3f725c5b92 tile: ensure interrupts disabled for preempt_schedule_irq()
When coming from a page fault (for example), interrupts might
be enabled as we enter the code to return from interrupt.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-27 16:09:43 -04:00
Henrik Austad
dd386e03d9 tile: change lock initalization in hardwall
hardwall used __SPIN_LOCK_INITIALIZER directly instead of the preferred
__SPIN_LOCK_UNLOCKED. This also has the benefit that it will compile
when applying the preempt-rt patch series.

Signed-off-by: Henrik Austad <haustad@cisco.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-27 16:09:38 -04:00
Chen Gang
b924a69067 tile: include: asm: use 'long long' instead of 'u64' for atomic64_t and its related functions
atomic* value is signed value, and atomic* functions need also process
signed value (parameter value, and return value), so use 'long long'
instead of 'u64'.

After replacement, it will also fix a bug for atomic64_add_negative():
"u64 is never less than 0".

The modifications are:

  in vim, use "1,% s/\<u64\>/long long/g" command.
  remove redundant '__aligned(8)'.
  be sure of 80 (and macro '\') columns limitation after replacement.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [re-instated const cast]
2013-09-27 16:08:56 -04:00
Peter Zijlstra
a787870924 sched, arch: Create asm/preempt.h
In order to prepare to per-arch implementations of preempt_count move
the required bits into an asm-generic header and use this for all
archs.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/n/tip-h5j0c1r3e3fk015m30h8f1zx@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-09-25 14:07:50 +02:00
Yijing Wang
503275bf37 tile/PCI: use cached pci_dev->pcie_mpss to simplify code
The PCI core caches the "PCIe Max Payload Size Supported" in
pci_dev->pcie_mpss, so use that instead of pcie_capability_read_dword().

Signed-off-by: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-09-24 12:10:04 -06:00
Chris Metcalf
e823acc0a9 tile: remove stray blank space
The compat sys_llseek() definition addition added a bogus space
on an otherwise-blank line.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16 15:47:32 -04:00
Chris Metcalf
88e2692a4d tile: <arch/> header updates from upstream
The hardware architecture descriptor headers have been updated, in
particular to reflect some larger MMIO fields on the mPIPE shims for
controlling the network hardware, from the recent Gx72 release.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16 15:47:26 -04:00
Chris Metcalf
126eb08820 tile: improve gxio iorpc autogenerated code style
Fix some whitespace style issues in some auto-generated files.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16 15:47:20 -04:00
Chris Metcalf
ad2a4bb378 tile: double default VMALLOC space
With per-cpu data as well as loaded kernel modules coming from
the vmalloc arena, we get close to the line all the time and
occasionally need more than we had, so just double it up by default.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-16 15:47:14 -04:00
Chris Metcalf
35fab6118f tile: remove stale arch/tile/kernel/futex_64.S
This should have been removed with commit 47d632f9f8, but
it was overlooked.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13 11:15:24 -04:00
Chris Metcalf
4b12909fd1 tile: remove HUGE_VMAP dead code
A config option to allow a variant vmap() using huge pages that was never
upstreamed had some bits of code related to it scattered around the tile
architecture; the config option was removed downstream and this commit
cleans up the scattered evidence of it from the upstream as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13 11:15:24 -04:00
Chris Metcalf
8629470ef8 tile: use pmd_pfn() instead of casting via pte_t
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13 11:14:25 -04:00
Chris Metcalf
4db30e38ec tile: fix typos in comment in arch/tile/kernel/unaligned.c
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-13 10:57:54 -04:00
Martin Schwidefsky
0244ad004a Remove GENERIC_HARDIRQ config option
After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-09-13 15:09:52 +02:00
Johannes Weiner
759496ba64 arch: mm: pass userspace fault flag to generic fault handler
Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.

Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:01 -07:00
Johannes Weiner
94bce453c7 arch: mm: remove obsolete init OOM protection
The memcg code can trap tasks in the context of the failing allocation
until an OOM situation is resolved.  They can hold all kinds of locks
(fs, mm) at this point, which makes it prone to deadlocking.

This series converts memcg OOM handling into a two step process that is
started in the charge context, but any waiting is done after the fault
stack is fully unwound.

Patches 1-4 prepare architecture handlers to support the new memcg
requirements, but in doing so they also remove old cruft and unify
out-of-memory behavior across architectures.

Patch 5 disables the memcg OOM handling for syscalls, readahead, kernel
faults, because they can gracefully unwind the stack with -ENOMEM.  OOM
handling is restricted to user triggered faults that have no other
option.

Patch 6 reworks memcg's hierarchical OOM locking to make it a little
more obvious wth is going on in there: reduce locked regions, rename
locking functions, reorder and document.

Patch 7 implements the two-part OOM handling such that tasks are never
trapped with the full charge stack in an OOM situation.

This patch:

Back before smart OOM killing, when faulting tasks were killed directly on
allocation failures, the arch-specific fault handlers needed special
protection for the init process.

Now that all fault handlers call into the generic OOM killer (see commit
609838cfed: "mm: invoke oom-killer from remaining unconverted page
fault handlers"), which already provides init protection, the
arch-specific leftovers can be removed.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Acked-by: Vineet Gupta <vgupta@synopsys.com>	[arch/arc bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-12 15:38:01 -07:00
Naoya Horiguchi
83467efbdb mm: migrate: check movability of hugepage in unmap_and_move_huge_page()
Currently hugepage migration works well only for pmd-based hugepages
(mainly due to lack of testing,) so we had better not enable migration of
other levels of hugepages until we are ready for it.

Some users of hugepage migration (mbind, move_pages, and migrate_pages) do
page table walk and check pud/pmd_huge() there, so they are safe.  But the
other users (softoffline and memory hotremove) don't do this, so without
this patch they can try to migrate unexpected types of hugepages.

To prevent this, we introduce hugepage_migration_support() as an
architecture dependent check of whether hugepage are implemented on a pmd
basis or not.  And on some architecture multiple sizes of hugepages are
available, so hugepage_migration_support() also checks hugepage size.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:57:49 -07:00
Linus Torvalds
b4b50fd78b ARM: SoC platform changes for 3.12
This branch contains mostly additions and changes to platform enablement
 and SoC-level drivers. Since there's sometimes a dependency on device-tree
 changes, there's also a fair amount of those in this branch.
 
 Pieces worth mentioning are:
 
 - Mbus driver for Marvell platforms, allowing kernel configuration
   and resource allocation of on-chip peripherals.
 - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
 - Preparation of MSI support for Marvell platforms.
 - Addition of new PCI-e host controller driver for Tegra platforms
 - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
   platforms in the device tree sources and header files.
 - Various suspend/PM updates for Tegra, including LP1 support.
 - Versatile Express support for MCPM, part of big little support.
 - Allwinner platform support for A20 and A31 SoCs (dual and quad Cortex-A7)
 - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.
 
 The code that touches other architectures are patches moving
 MSI arch-specific functions over to weak symbols and removal of
 ARCH_SUPPORTS_MSI, acked by PCI maintainers.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSKhYmAAoJEIwa5zzehBx322AP/1ONYs8o8f7/Gzq6lZvTN6T3
 0pBTApg6Jfioi3lwKvUAEIcsW82YKQ+UZkbW66GQH6+Ri4aZJKZHuz0+JPU67OJ4
 LtSLuzVWrymy2VOOUvAnS/SXkOZw/pHhU4cLNHn1dMndhUL1Uqp9/XwuiHEQyFsP
 uOkpcBtIu0EWElov0PKKZ5SWBg8JJs2vy5ydiViGelWHCrZvDDZkWzIsDcBQxJLQ
 juzT4+JE+KOu7vKmfw78o6iHoCS2TBRAN9YUCajRb8Wl+out1hrTahHnDWaZ5Mce
 EskcQNkJROqFbjD4k3ABN4XGTv2VDmrztIwFe0SEQ7Dz/9ypCrBGT69uI9xIqTXr
 GwVRIwAUFTpMupK0gy93z1ajV3N0CXV79out9+jQNUQybYE+czp8QOyhmuc1tZx0
 8fn9jlBQe9Vy6yrs39gEcE7nUwrayeyQ+6UvqqwsE2pWZabNAnCMSPX5+QIu+T/3
 tQ7+jYmfFeserp1sIDOHOnxfhtW9EI6U9d1h/DUCwrsuFdkL9ha4M/vh9Pwgye98
 tBdz0T4yE39AJQwwFWRkv1jcQKcGu6WqJanmvS4KRBksGwuLWxy+ewOnkz2ifS25
 ZYSyxAryZRBvQRqlOK11rXPfRcbGcY0MG9lkKX96rGcyWEizgE1DdjxXD8HoIleN
 R8heV6GX5OzlFLGX2tKK
 =fJ5x
 -----END PGP SIGNATURE-----

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
 "This branch contains mostly additions and changes to platform
  enablement and SoC-level drivers.  Since there's sometimes a
  dependency on device-tree changes, there's also a fair amount of
  those in this branch.

  Pieces worth mentioning are:

   - Mbus driver for Marvell platforms, allowing kernel configuration
     and resource allocation of on-chip peripherals.
   - Enablement of the mbus infrastructure from Marvell PCI-e drivers.
   - Preparation of MSI support for Marvell platforms.
   - Addition of new PCI-e host controller driver for Tegra platforms
   - Some churn caused by sharing of macro names between i.MX 6Q and 6DL
     platforms in the device tree sources and header files.
   - Various suspend/PM updates for Tegra, including LP1 support.
   - Versatile Express support for MCPM, part of big little support.
   - Allwinner platform support for A20 and A31 SoCs (dual and quad
     Cortex-A7)
   - OMAP2+ support for DRA7, a new Cortex-A15-based SoC.

  The code that touches other architectures are patches moving MSI
  arch-specific functions over to weak symbols and removal of
  ARCH_SUPPORTS_MSI, acked by PCI maintainers"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (266 commits)
  tegra-cpuidle: provide stub when !CONFIG_CPU_IDLE
  PCI: tegra: replace devm_request_and_ioremap by devm_ioremap_resource
  ARM: tegra: Drop ARCH_SUPPORTS_MSI and sort list
  ARM: dts: vf610-twr: enable i2c0 device
  ARM: dts: i.MX51: Add one more I2C2 pinmux entry
  ARM: dts: i.MX51: Move pins configuration under "iomuxc" label
  ARM: dtsi: imx6qdl-sabresd: Add USB OTG vbus pin to pinctrl_hog
  ARM: dtsi: imx6qdl-sabresd: Add USB host 1 VBUS regulator
  ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX
  ARM: dts: i.MX27: Disable AUDMUX in the template
  ARM: dts: wandboard: Add support for SDIO bcm4329
  ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template
  ARM: dts: imx53-qsb: Make USBH1 functional
  ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module
  ARM i.MX6Q: dts: Enable SPI NOR flash on Phytec phyFLEX-i.MX6 Ouad module
  ARM: dts: imx6qdl-sabresd: Add touchscreen support
  ARM: imx: add ocram clock for imx53
  ARM: dts: imx: ocram size is different between imx6q and imx6dl
  ARM: dts: imx27-phytec-phycore-som: Fix regulator settings
  ARM: dts: i.MX27: Remove clock name from CPU node
  ...
2013-09-06 13:30:06 -07:00
Linus Torvalds
4de9ad9bc0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull Tile arch updates from Chris Metcalf:
 "These changes bring in a bunch of new functionality that has been
  maintained internally at Tilera over the last year, plus other stray
  bits of work that I've taken into the tile tree from other folks.

  The changes include some PCI root complex work, interrupt-driven
  console support, support for performing fast-path unaligned data
  fixups by kernel-based JIT code generation, CONFIG_PREEMPT support,
  vDSO support for gettimeofday(), a serial driver for the tilegx
  on-chip UART, KGDB support, more optimized string routines, support
  for ftrace and kprobes, improved ASLR, and many bug fixes.

  We also remove support for the old TILE64 chip, which is no longer
  buildable"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (85 commits)
  tile: refresh tile defconfig files
  tile: rework <asm/cmpxchg.h>
  tile PCI RC: make default consistent DMA mask 32-bit
  tile: add null check for kzalloc in tile/kernel/setup.c
  tile: make __write_once a synonym for __read_mostly
  tile: remove support for TILE64
  tile: use asm-generic/bitops/builtin-*.h
  tile: eliminate no-op "noatomichash" boot argument
  tile: use standard tile_bundle_bits type in traps.c
  tile: simplify code referencing hypervisor API addresses
  tile: change <asm/system.h> to <asm/switch_to.h> in comments
  tile: mark pcibios_init() as __init
  tile: check for correct compiler earlier in asm-offsets.c
  tile: use standard 'generic-y' model for <asm/hw_irq.h>
  tile: use asm-generic version of <asm/local64.h>
  tile PCI RC: add comment about "PCI hole" problem
  tile: remove DEBUG_EXTRA_FLAGS kernel config option
  tile: add virt_to_kpte() API and clean up and document behavior
  tile: support FRAME_POINTER
  tile: support reporting Tilera hypervisor statistics
  ...
2013-09-06 11:14:33 -07:00
Chris Metcalf
06da6629e6 tile: refresh tile defconfig files
These are based on the current shipping versions of the config files
from Tilera, as synced up to the tip, so are a better starting point
for folks who want a default configuration.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 13:06:30 -04:00
Chris Metcalf
6dc9658fa1 tile: rework <asm/cmpxchg.h>
The macrology in cmpxchg.h was designed to allow arbitrary pointer
and integer values to be passed through the routines.  To support
cmpxchg() on 64-bit values on the 32-bit tilepro architecture, we
used the idiom "(typeof(val))(typeof(val-val))".  This way, in the
"size 8" branch of the switch, when the underlying cmpxchg routine
returns a 64-bit quantity, we cast it first to a typeof(val-val)
quantity (i.e. size_t if "val" is a pointer) with no warnings about
casting between pointers and integers of different sizes, then cast
onwards to typeof(val), again with no warnings.  If val is not a
pointer type, the additional cast is a no-op.  We can't replace the
typeof(val-val) cast with (for example) unsigned long, since then if
"val" is really a 64-bit type, we cast away the high bits.

HOWEVER, this fails with current gcc (through 4.7 at least) if "val"
is a pointer to an incomplete type.  Unfortunately gcc isn't smart
enough to realize that "val - val" will always be a size_t type
even if it's an incomplete type pointer.

Accordingly, I've reworked the way we handle the casting.  We have
given up the ability to use cmpxchg() on 64-bit values on tilepro,
which is OK in the kernel since we should use cmpxchg64() explicitly
on such values anyway.  As a result, I can just use simple "unsigned
long" casts internally.

As I reworked it, I realized it would be cleaner to move the
architecture-specific conditionals for cmpxchg and xchg out of the
atomic.h headers and into cmpxchg, and then use the cmpxchg() and
xchg() primitives directly in atomic.h and elsewhere.  This allowed
the cmpxchg.h header to stand on its own without relying on the
implicit include of it that is performed by <asm/atomic.h>.
It also allowed collapsing the atomic_xchg/atomic_cmpxchg routines
from atomic_{32,64}.h into atomic.h.

I improved the tests that guard the allowed size of the arguments
to the routines to use a __compiletime_error() test.  (By avoiding
the use of BUILD_BUG, I could include cmpxchg.h into bitops.h as
well and use the macros there, which is otherwise impossible due
to include order dependency issues.)

The tilepro _atomic_xxx internal methods were previously set up to
take atomic_t and atomic64_t arguments, which isn't as convenient
with the new model, so I modified them to take int or u64 arguments,
which is consistent with how they used the arguments internally
anyway, so provided some nice simplification there too.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-06 13:06:25 -04:00
Linus Torvalds
cc998ff881 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:
 "Noteworthy changes this time around:

   1) Multicast rejoin support for team driver, from Jiri Pirko.

   2) Centralize and simplify TCP RTT measurement handling in order to
      reduce the impact of bad RTO seeding from SYN/ACKs.  Also, when
      both timestamps and local RTT measurements are available prefer
      the later because there are broken middleware devices which
      scramble the timestamp.

      From Yuchung Cheng.

   3) Add TCP_NOTSENT_LOWAT socket option to limit the amount of kernel
      memory consumed to queue up unsend user data.  From Eric Dumazet.

   4) Add a "physical port ID" abstraction for network devices, from
      Jiri Pirko.

   5) Add a "suppress" operation to influence fib_rules lookups, from
      Stefan Tomanek.

   6) Add a networking development FAQ, from Paul Gortmaker.

   7) Extend the information provided by tcp_probe and add ipv6 support,
      from Daniel Borkmann.

   8) Use RCU locking more extensively in openvswitch data paths, from
      Pravin B Shelar.

   9) Add SCTP support to openvswitch, from Joe Stringer.

  10) Add EF10 chip support to SFC driver, from Ben Hutchings.

  11) Add new SYNPROXY netfilter target, from Patrick McHardy.

  12) Compute a rate approximation for sending in TCP sockets, and use
      this to more intelligently coalesce TSO frames.  Furthermore, add
      a new packet scheduler which takes advantage of this estimate when
      available.  From Eric Dumazet.

  13) Allow AF_PACKET fanouts with random selection, from Daniel
      Borkmann.

  14) Add ipv6 support to vxlan driver, from Cong Wang"

Resolved conflicts as per discussion.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1218 commits)
  openvswitch: Fix alignment of struct sw_flow_key.
  netfilter: Fix build errors with xt_socket.c
  tcp: Add missing braces to do_tcp_setsockopt
  caif: Add missing braces to multiline if in cfctrl_linkup_request
  bnx2x: Add missing braces in bnx2x:bnx2x_link_initialize
  vxlan: Fix kernel panic on device delete.
  net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
  net: mvneta: properly disable HW PHY polling and ensure adjust_link() works
  icplus: Use netif_running to determine device state
  ethernet/arc/arc_emac: Fix huge delays in large file copies
  tuntap: orphan frags before trying to set tx timestamp
  tuntap: purge socket error queue on detach
  qlcnic: use standard NAPI weights
  ipv6:introduce function to find route for redirect
  bnx2x: VF RSS support - VF side
  bnx2x: VF RSS support - PF side
  vxlan: Notify drivers for listening UDP port changes
  net: usbnet: update addr_assign_type if appropriate
  driver/net: enic: update enic maintainers and driver
  driver/net: enic: Exposing symbols for Cisco's low latency driver
  ...
2013-09-05 14:54:29 -07:00
Linus Torvalds
a923874198 PCI changes for the v3.12 merge window:
PCI device hotplug
     - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
     - Assign resources on per-host bridge basis (Yinghai Lu)
 
   MPS (Max Payload Size)
     - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
     - Add warnings about unsafe MPS settings (Yijing Wang)
     - Simplify interface and messages (Bjorn Helgaas)
 
   SR-IOV
     - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
     - Update NumVFs register when disabling SR-IOV (Yijing Wang)
 
   Virtualization
     - Add bus and slot reset support (Alex Williamson)
     - Fix ACS (Access Control Services) issues (Alex Williamson)
 
   Miscellaneous
     - Simplify PCIe Capability accessors (Bjorn Helgaas)
     - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
     - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
     - Delay enabling bridges until they're needed (Yinghai Lu)
     - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
     - Convert class code to use dev_groups (Greg Kroah-Hartman)
     - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
     - Fix bridge I/O window alignment (Bjorn Helgaas)
     - Add pci_wait_for_pending_transaction() (Casey Leedom)
     - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSJiBcAAoJEFmIoMA60/r8xJgQAJML7aDmo3ASfabGrfY12fUR
 10Miud/MzlX8/AjPSVW0BodpPMmyQY/Viqd9nBWVm3OR9JSrBp2Q8a3Qge5c0GsE
 dMpO3bJrjOmexaAP3wqEQ/NNyL+iIO7fVQsjHf0uyYTS359Ed0TMWsLQwjAa+h2d
 bB2Ul1AqNiXywCj8Kxnzz52DLnRn1g2YVwp7hACCXyQ+NDVDqhgbxLBnbEFkQqOr
 jAF38xz6DuyVTF+EzIIUDWsOLuo5s0qC3aai36yrVwUuuppBFFX4QRoUOaerZRwe
 2WCSa8jqI5QnOPU0LYIPr24DJa6LKCtuSJXUE5hKZgz70UsNefRkV3F5lzB/YlXt
 t5PYH9B27fEyokh8gGmyytAKkutbm8RH3+99cjNzf/UKuiJgzZE27qi3A+DEpJft
 Igl4WoIC39/fhDSvmpGfd7BWvEkdz86UKdB9f7Wz6+NpWoDLiYiwqkOGuF0bo7zo
 3vH48s5VAR8avyGeSUPGFcP9Bq+Hi936xzZxq+Hrj0hASPTpOMTLD1XCqomONO26
 x6x0ipHRDTh3TixHN7KENqyIJCkY/vlzt4kDnzytZe4TupJX+hlG74fq98hpoEFy
 y2RPiLB8jahPf+fr4cmltqiv6WAhcUcJuGdcAF+Ht4wlrIDELR8e7AKH4Q04B/5O
 I8FCB6bay8mvW6MMSXql
 =uNEk
 -----END PGP SIGNATURE-----

Merge tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI changes from Bjorn Helgaas:

  PCI device hotplug:
    - Use PCIe native hotplug, not ACPI hotplug, when possible (Neil Horman)
    - Assign resources on per-host bridge basis (Yinghai Lu)

  MPS (Max Payload Size):
    - Allow larger MPS settings below hotplug-capable Root Port (Yijing Wang)
    - Add warnings about unsafe MPS settings (Yijing Wang)
    - Simplify interface and messages (Bjorn Helgaas)

  SR-IOV:
    - Return -ENOSYS on non-SR-IOV devices (Stefan Assmann)
    - Update NumVFs register when disabling SR-IOV (Yijing Wang)

  Virtualization:
    - Add bus and slot reset support (Alex Williamson)
    - Fix ACS (Access Control Services) issues (Alex Williamson)

  Miscellaneous:
    - Simplify PCIe Capability accessors (Bjorn Helgaas)
    - Add pcibios_pm_ops for arch-specific hibernate stuff (Sebastian Ott)
    - Disable decoding during BAR sizing only when necessary (Zoltan Kiss)
    - Delay enabling bridges until they're needed (Yinghai Lu)
    - Split Designware support into Synopsys and Exynos parts (Jingoo Han)
    - Convert class code to use dev_groups (Greg Kroah-Hartman)
    - Cleanup Designware and Exynos I/O access wrappers (Seungwon Jeon)
    - Fix bridge I/O window alignment (Bjorn Helgaas)
    - Add pci_wait_for_pending_transaction() (Casey Leedom)
    - Use devm_ioremap_resource() in Marvell driver (Tushar Behera)

* tag 'pci-v3.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (63 commits)
  PCI/ACPI: Fix _OSC ordering to allow PCIe hotplug use when available
  PCI: exynos: Add I/O access wrappers
  PCI: designware: Drop "addr" arg from dw_pcie_readl_rc()/dw_pcie_writel_rc()
  PCI: Remove pcie_cap_has_devctl()
  PCI: Support PCIe Capability Slot registers only for ports with slots
  PCI: Remove PCIe Capability version checks
  PCI: Allow PCIe Capability link-related register access for switches
  PCI: Add offsets of PCIe capability registers
  PCI: Tidy bitmasks and spacing of PCIe capability definitions
  PCI: Remove obsolete comment reference to pci_pcie_cap2()
  PCI: Clarify PCI_EXP_TYPE_PCI_BRIDGE comment
  PCI: Rename PCIe capability definitions to follow convention
  PCI: Warn if unsafe MPS settings detected
  PCI: Fix MPS peer-to-peer DMA comment syntax
  PCI: Disable decoding for BAR sizing only when it was actually enabled
  PCI: Add comment about needing pci_msi_off() even when CONFIG_PCI_MSI=n
  PCI: Add pcibios_pm_ops for optional arch-specific hibernate functionality
  PCI: Don't restrict MPS for slots below Root Ports
  PCI: Simplify MPS test for Downstream Port
  PCI: Remove unnecessary check for pcie_get_mps() failure
  ...
2013-09-03 16:24:35 -07:00
Chris Metcalf
b40f451d56 tile PCI RC: make default consistent DMA mask 32-bit
This change sets the PCI devices' initial DMA capabilities
conservatively and promotes them at the request of the driver,
as opposed to assuming advanced DMA capabilities. The old design
runs the risk of breaking drivers that assume default capabilities.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:37 -04:00
Wang Sheng-Hui
6d715790ef tile: add null check for kzalloc in tile/kernel/setup.c
Should check the return value of kzalloc first to avoid the null pointer.
Then can dereference the non-null pointer to access the fields of struct
resource.

Signed-off-by: Wang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:34 -04:00
Chris Metcalf
ce61cdc270 tile: make __write_once a synonym for __read_mostly
This was really only useful for TILE64 when we mapped the
kernel data with small pages. Now we use a huge page and we
really don't want to map different parts of the kernel
data in different ways.

We retain the __write_once name in case we want to bring
it back to life at some point in the future.

Note that this change uncovered a latent bug where the
"smp_topology" variable happened to always be aligned mod 8
so we could store two "int" values at once, but when we
eliminated __write_once it ended up only aligned mod 4.
Fix with an explicit annotation.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:32 -04:00
Chris Metcalf
d7c9661115 tile: remove support for TILE64
This chip is no longer being actively developed for (it was superceded
by the TILEPro64 in 2008), and in any case the existing compiler and
toolchain in the community do not support it.  It's unlikely that the
kernel works with TILE64 at this point as the configuration has not been
tested in years.  The support is also awkward as it requires maintaining
a significant number of ifdefs.  So, just remove it altogether.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:29 -04:00
Akinobu Mita
d6a0aa314c tile: use asm-generic/bitops/builtin-*.h
The definisions of __ffs(), __fls(), and ffs() for tile are almost same
as asm-generic/bitops-*.h.  The only difference is that it is defined
as __always_inline or inline.  So this switches to use those headers.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [moved #includes to end]
2013-09-03 14:53:27 -04:00
Chris Metcalf
f6f380dff6 tile: eliminate no-op "noatomichash" boot argument
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:24 -04:00
Chris Metcalf
a0099303cd tile: use standard tile_bundle_bits type in traps.c
We were rolling our own bundle_bits, which is unnecessary.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:22 -04:00
Chris Metcalf
43b7f2fb58 tile: simplify code referencing hypervisor API addresses
There's no need to make up new ways of computing the addresses
of the Tilera hypervisor APIs; just use the standard method
of relying on the symbols to provide the addresses.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:20 -04:00
Chris Metcalf
850a45209d tile: change <asm/system.h> to <asm/switch_to.h> in comments
Also fix mentions of it in #error statements.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:17 -04:00
Chris Metcalf
7b770a6a0a tile: mark pcibios_init() as __init
It was bombed away because it was previously marked as __devinit,
but it should be an __init function.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:15 -04:00
Chris Metcalf
9a55fed473 tile: check for correct compiler earlier in asm-offsets.c
If we wait until after including a bunch of other files, we
will have generated so much warning spew that it's hard to
notice the error about using the wrong compiler.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:53:09 -04:00
Chris Metcalf
729b25a464 tile: use standard 'generic-y' model for <asm/hw_irq.h>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:52:25 -04:00
Chris Metcalf
4c63de8df0 tile: use asm-generic version of <asm/local64.h>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:52:22 -04:00
Chris Metcalf
5e7705df28 tile PCI RC: add comment about "PCI hole" problem
Explain the rationale of not overlapping the 64-bit DMA window
with the PA range.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:52:20 -04:00
Chris Metcalf
bdb8205455 tile: remove DEBUG_EXTRA_FLAGS kernel config option
It isn't used any more by us now that the generic kernel build
offers DEBUG_INFO_REDUCED, so just get rid of it.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:52:17 -04:00
Chris Metcalf
640710a33b tile: add virt_to_kpte() API and clean up and document behavior
We use virt_to_pte(NULL, va) a lot, which isn't very obvious.
I added virt_to_kpte(va) as a more obvious wrapper function,
that also validates the va as being a kernel adddress.

And, I fixed the semantics of virt_to_pte() so that we handle
the pud and pmd the same way, and we now document the fact that
we handle the final pte level differently.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:52:13 -04:00
Chris Metcalf
49cf78ef7b tile: support FRAME_POINTER
Allow enabling frame pointer support; this makes it easier to hook
into the various kernel features that claim they require it without
having to add Kconfig conditionals everywhere (a la mips, ppc, s390,
and microblaze).  When enabled, it basically eliminates leaf functions
as such, and stops optimizing tail and sibling calls.  It adds around
3% to the size of the kernel when enabled.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:52:09 -04:00
Chris Metcalf
80f184108e tile: support reporting Tilera hypervisor statistics
Newer hypervisors have an API for reporting per-cpu statistics
information.  This change allows seeing that information via
/sys/devices/system/cpu/cpuN/hv_stats file for each core.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:51:36 -04:00
Chris Metcalf
8157107b13 tilegx: support KGDB
Enter kernel debugger at boot with:
  --hvd UART_1=1 --hvx kgdbwait --hvx kgdboc=ttyS1,115200
or at runtime with:
  echo ttyS1,115200 > /sys/module/kgdboc/parameters/kgdboc
  echo g > /proc/sysrq-trigger

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:51:26 -04:00
Chris Metcalf
6ec006ede5 tilegx: provide kernel support for the tilegx UART shim
The TILE-Gx chip includes an on-chip UART.  This change adds support
for using the UART from within the kernel.  The UART shim has more
functionality than is exposed here, but to keep the kernel code and
binary simpler, this is a subset of the full API designed to enable
a standard Linux tty serial driver only.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:50:36 -04:00
Chris Metcalf
acbde1db29 tile: parameterize VA and PA space more cleanly
The existing code relied on the hardware definition (<arch/chip.h>)
to specify how much VA and PA space was available.  It's convenient
to allow customizing this for some configurations, so provide symbols
MAX_PA_WIDTH and MAX_VA_WIDTH in <asm/page.h> that can be modified
if desired.

Additionally, move away from the MEM_XX_INTRPT nomenclature to
define the start of various regions within the VA space.  In fact
the cleaner symbol is, for example, MEM_SV_START, to indicate the
start of the area used for supervisor code; the actual address of the
interrupt vectors is not as important, and can be changed if desired.
As part of this change, convert from "intrpt1" nomenclature (which
built in the old privilege-level 1 model) to a simple "intrpt".

Also strip out some tilepro-specific code supporting modifying the
PL the kernel could run at, since we don't actually support using
different PLs in tilepro, only tilegx.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:47:34 -04:00
Chris Metcalf
051168df52 tile: don't assume user privilege is zero
Technically, user privilege is anything less than kernel
privilege.  We modify the existing user_mode() macro to have
this semantic (and use it in a couple of places it wasn't being
used before), and add an IS_KERNEL_EX1() macro to the assembly
code as well.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:45:52 -04:00
Chris Metcalf
309272f99f tile: clean up relocate_kernel_64 debug code
We remove some debug code in relocate_kernel_64.S that made raw
calls to the hv_console_putc Tilera hypervisor API, since everything
should funnel through the early_hv_write() API.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-09-03 14:13:31 -04:00
Chris Metcalf
a718e10cba tile: handle super huge pages in virt_to_pte
This tile-specific API had a minor bug, in that if a super huge (>4GB)
page mapped a particular address range, we wouldn't handle it correctly.
As part of fixing that bug, I also cleaned up some of the pud and pmd
accessors to make them more consistent.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:57:02 -04:00
Chris Metcalf
35f059761c tilegx: change how we find the kernel stack
Previously, we used a special-purpose register (SPR_SYSTEM_SAVE_K_0)
to hold the CPU number and the top of the current kernel stack
by using the low bits to hold the CPU number, and using the high
bits to hold the address of the page just above where we'd want
the kernel stack to be.  That way we could initialize a new SP
when first entering the kernel by just masking the SPR value and
subtracting a couple of words.

However, it's actually more useful to be able to place an arbitrary
kernel-top value in the SPR.  This allows us to create a new stack
context (e.g. for virtualization) with an arbitrary top-of-stack VA.
To make this work, we now store the CPU number in the high bits,
above the highest legal VA bit (42 bits in the current tilegx
microarchitecture).  The full 42 bits are thus available to store the
top of stack value.  Getting the current cpu (a relatively common
operation) is still fast; it's now a shift rather than a mask.

We make this change only for tilegx, since tilepro has too few SPR
bits to do this, and we don't need this support on tilepro anyway.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:58 -04:00
Chris Metcalf
4036c7d354 tile: don't call show_regs_print_info() with corrupt current
We use the validate_current() API to make sure that "current" seems
plausible before using it.  With the new show_regs_print_info()
API, we want to check that current is OK before calling it, since
otherwise we will end up in a recursive panic.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:54 -04:00
Chris Metcalf
6fbeee29a2 tile: fix some -Wsign-compare warnings
Normally the build doesn't include these warnings, but at one
point I built with -Wsign-compare, and noticed a few things that
are technically bugs.  This change fixes those things.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:50 -04:00
Chris Metcalf
e56059f2d3 tile: group .hottext* sections properly in vmlinux.lds
With this change such sections are grouped with regular text
in the vmlinux image; this change puts them at the front,
which is where the standard Linux includes .text.hot*.
This change should fix a recently-observed bug where a bunch of
symbols were being omitted from the /proc/kallsyms output
because they fell between _etext and _sinittext.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:46 -04:00
Chris Metcalf
c0f0601060 tile: fix strncpy_from_user bug
In strncpy_from_user_asm, when the destination buffer length was the
same as the actual string length, we were returning the size of the
destination buffer.  But since it's a NUL terminated string, we should
return the length of the string instead.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:42 -04:00
Chris Metcalf
084fe6a0f5 tile: remove set/clear_fixmap APIs
Nothing in the codebase was using them, and as written they took
"unsigned long" as the physical address rather than "phys_addr_t",
which is wrong on tilepro anyway.  Rather than fixing stale APIs,
just remove them; if there's ever demand for them on this platform,
we can put them back.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:38 -04:00
Chris Metcalf
abe3265a6d tile: do less L1 I-cache eviction
We had been doing an automatic full eviction of the L1 I$
everywhere whenever we did a kernel-space TLB flush.  It turns
out this isn't necessary, since all the callers already handle
doing a flush if necessary.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:34 -04:00
Chris Metcalf
6f0142d501 tile: allow "initrd" boot argument for kexec
This enables support for "kexec --initrd" for tile.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:30 -04:00
Tony Lu
b2eca4274c tile: support ASLR fully
With this change, tile Linux now supports address-space layout
randomization for shared objects, stack, heap and vdso.

Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Tony Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:25 -04:00
Chris Metcalf
9b5bbf729d tile: correct r1 value during syscall tracing
The r1 value is set based on the r0 value as we return to user space.
So tracing tools won't automatically see the right value.  Fix this by
generating the correct r1 value in do_syscall_trace_exit() rather
than trying to tamper with the hot path in syscall return.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:20 -04:00
Chris Metcalf
8d8cf06740 tile: fix panic with large IRQ number
The "available_irqs" value needs to actually reflect the IRQs
available, not just start as an all-ones mask, since we only
have 32 IRQs available even on a 64-bit platform.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:16 -04:00
Chris Metcalf
d4d9eab4ad tile: use proper .align directives on __ex_table sections
This may fix a reported bug where an R_TILEGX_64 in a module was not
pointing to an aligned address.

Reported-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:56:11 -04:00
Tony Lu
3fa17c395b tile: support kprobes on tilegx
This change includes support for Kprobes, Jprobes and Return Probes.

Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Tony Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 11:55:53 -04:00
Tony Lu
a61fd5e366 tile: support ftrace on tilegx
This commit adds support for static ftrace, graph function support,
and dynamic tracer support.

Signed-off-by: Tony Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-30 10:20:13 -04:00
Bjorn Helgaas
a58674ff83 PCI: Simplify pcie_bus_configure_settings() interface
Based on a patch by Jon Mason (see URL below).

All users of pcie_bus_configure_settings() pass arguments of the form
"bus, bus->self->pcie_mpss".  The "mpss" argument is redundant since we
can easily look it up internally.  In addition, all callers check
"bus->self" for NULL, which we can also do internally.

This patch simplifies the interface and the callers.  No functional change.

Reference: http://lkml.kernel.org/r/1317048850-30728-2-git-send-email-mason@myri.com
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2013-08-22 10:47:02 -06:00
Kevin Hilman
bfa664f21b ARM: tegra: core SoC enhancements for 3.12
This branch includes a number of enhancements to core SoC support for
 Tegra devices. The major new features are:
 
 * Adds a new CPU-power-gated cpuidle state for Tegra114.
 * Adds initial system suspend support for Tegra114, initially supporting
   just CPU-power-gating during suspend.
 * Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode
   both gates CPU power, and places the DRAM into self-refresh mode.
 * A new DT-driven PCIe driver to Tegra20/30. The driver is also moved
   from arch/arm/mach-tegra/ to drivers/pci/host/.
 
 The PCIe driver work depends on the following tag from Thomas Petazzoni:
 git://git.infradead.org/linux-mvebu.git mis-3.12.2
 ... which is merged into the middle of this pull request.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJSDlwwAAoJEMzrak5tbycxR68QAJZ/Izc9Izj0JH8hmCEvMNfi
 ub1DQfWAy3oXk0ttkk+BMvuyD8JTvBr8LSK8GqjZs//rFGlW81A4NHTvCwoKZjKe
 hgrRgI2B1wj3Um1sp8le9D0klKrTcfmpXrOxH8ALgz0BIpMge8AGZHkV0SrfQa1z
 bKiISFVAw12WJCVrQ2nbzpZGU51lbyJ/+RghttM1a8LuS2P03CZgt2kqiytk3UVK
 uiGEy3sCkjXLFO3EsUvM6ha623S6BumCAYjNfgDowTVKaoEe1r2TD4bFeU6lGcXJ
 mlVTv0Kywazf4Q2gKzkbDz8UQMArW4hok2iILHzz+sf/Rn0hie5XVqhFlbBlcae8
 vyWsHmqvmE9BJAK2G2RLs9cJCTzEpEyAjUWfE3sIIa3ztSguT5+PHndDLR/d76aS
 j8L3FYReICZ1NuNw1JSQPFs9g2EWJbNRiy+8o9O2elsJMpLDBj/FcV6TVpudbBTI
 z7hvN+XSVYUaCVD4e8ma9YoC3VGseiAZvd+Y8hPd2MFBECVPNpy2bOacieU6Bgxh
 zjSBXZ/URxN3rTkv9+F3BLWAOfVmJYN0rKV9YfM/rqpWjc9iQx30m1fRZDnXWhvd
 ps8eFIYsKqc6v9AAugl/RexFy4Laav9eREjb0k2LA8ClLhK/qLLuiisVmKWS/grh
 lX9tzPEG2nZcjxSYaEjz
 =ve9i
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra into next/soc

From: Stephen Warren:
ARM: tegra: core SoC enhancements for 3.12

This branch includes a number of enhancements to core SoC support for
Tegra devices. The major new features are:

* Adds a new CPU-power-gated cpuidle state for Tegra114.
* Adds initial system suspend support for Tegra114, initially supporting
  just CPU-power-gating during suspend.
* Adds "LP1" suspend mode support for all of Tegra20/30/114. This mode
  both gates CPU power, and places the DRAM into self-refresh mode.
* A new DT-driven PCIe driver to Tegra20/30. The driver is also moved
  from arch/arm/mach-tegra/ to drivers/pci/host/.

The PCIe driver work depends on the following tag from Thomas Petazzoni:
git://git.infradead.org/linux-mvebu.git mis-3.12.2
... which is merged into the middle of this pull request.

* tag 'tegra-for-3.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra: (33 commits)
  ARM: tegra: disable LP2 cpuidle state if PCIe is enabled
  MAINTAINERS: Add myself as Tegra PCIe maintainer
  PCI: tegra: set up PADS_REFCLK_CFG1
  PCI: tegra: Add Tegra 30 PCIe support
  PCI: tegra: Move PCIe driver to drivers/pci/host
  PCI: msi: add default MSI operations for !HAVE_GENERIC_HARDIRQS platforms
  ARM: tegra: add LP1 suspend support for Tegra114
  ARM: tegra: add LP1 suspend support for Tegra20
  ARM: tegra: add LP1 suspend support for Tegra30
  ARM: tegra: add common LP1 suspend support
  clk: tegra114: add LP1 suspend/resume support
  ARM: tegra: config the polarity of the request of sys clock
  ARM: tegra: add common resume handling code for LP1 resuming
  ARM: pci: add ->add_bus() and ->remove_bus() hooks to hw_pci
  of: pci: add registry of MSI chips
  PCI: Introduce new MSI chip infrastructure
  PCI: remove ARCH_SUPPORTS_MSI kconfig option
  PCI: use weak functions for MSI arch-specific functions
  ARM: tegra: unify Tegra's Kconfig a bit more
  ARM: tegra: remove the limitation that Tegra114 can't support suspend
  ...

Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-08-21 10:17:18 -07:00
Chris Metcalf
9ae0983847 tile: provide traceability for hypervisor calls
This change adds infrastructure (CONFIG_TILE_HVGLUE_TRACE) that
provides C code wrappers for the calls the kernel makes to the Tilera
hypervisor.  This allows standard kernel infrastructure like FTRACE to
be able to instrument hypervisor calls.

To allow direct calls to the true API, we export their names with a
leading underscore as well.  This is important for the few contexts
where we need to make hypervisor calls without touching the stack.

As part of this change, we also switch from creating the symbols
with linker magic to creating them with assembler magic.  This lets
us provide a symbol type and generally make them appear more as symbols
and less as just random values in the Elf namespace.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:31 -04:00
Chris Metcalf
fad052dc4b tile: avoid struct vm_struct leak
If ioreamp_prot() fails in ioremap_page_range() due to kernel memory
exhaustion, we previously would leak a struct vm_struct.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:25 -04:00
Chris Metcalf
4a556f4f56 tile: implement gettimeofday() via vDSO
This change creates the framework for vDSO calls, makes the existing
rt_sigreturn() mechanism use it, and adds a fast gettimeofday().
Now that we need to expose the vDSO address to userspace, we add
AT_SYSINFO_EHDR to the set of aux entries provided to userspace.
(You can disable any extra vDSO support by booting with vdso=0,
but the rt_sigreturn vDSO page will still be provided.)

Note that glibc has supported the tile vDSO since release 2.17.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:21 -04:00
Chris Metcalf
0c1d1917c5 tile: support simulator notification for ET_DYN objects
The tile code notifies the simulator of new ET_EXEC objects starting
to execute so that tracing code can properly annotate the objects.
However, we didn't support ET_DYN executables like ld.so, so we
didn't properly load symbols, etc.  This change enables that support;
we use a variant of the SIM_CONTROL_DLOPEN simulator notification
that newer simulators will recognize and use to set the base address
for the next SIM_CONTROL_OS_EXEC notification.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:17 -04:00
Chris Metcalf
70d2b5958a tile: improve illegal translation interrupt handling
First, don't re-enable interrupts blindly in the Linux trap handler.
We already handle page faults this way; synchronous interrupts like
ILL_TRANS will fire even when interrupts are disabled, and we don't
want to re-enable interrupts in that case.

For ILL_TRANS, we now pass the ILL_VA_PC reason into the trap handler
so we can report it properly; this is the address that caused the
illegal translation trap.  We print the address as part of the
pr_alert() message now if it's coming from the kernel.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:13 -04:00
Chris Metcalf
dadf78bf03 tile: make register dumps more readable
It's much easier to read register dumps if you read vertically
rather than horizontally, since the register numbers line up
and lead the eye down more than to the right.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:09 -04:00
Chris Metcalf
ba02f0eb82 tile: improve big-endian support
First, fix a bug in asm/unaligned.h; we need to just use the asm-generic
unaligned.h so we properly choose endian-correct flavors.

Second, keep the hv/hypervisor.h ABI fully "native" in the sense that
we don't have __BIG_ENDIAN__ ifdefs there.  Instead, we use macros in
the head_NN.S assembly code to properly extract two 32-bit structure
members from a 64-bit register holding the structure.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:05 -04:00
Chris Metcalf
bc1a298f4e tile: support CONFIG_PREEMPT
This change adds support for CONFIG_PREEMPT (full kernel preemption).
In addition to the core support, this change includes a number
of places where we fix up uses of smp_processor_id() and per-cpu
variables.  I also eliminate the PAGE_HOME_HERE and PAGE_HOME_UNKNOWN
values for page homing, as it turns out they weren't being used.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:26:01 -04:00
Chris Metcalf
1182b69cb2 tile: remove calls to arch_flush_lazy_mmu_mode()
Since it's a no-op on tile anyway, there's no reason to be calling
it in tile-specific code.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:25:56 -04:00
Chris Metcalf
a0bd12d718 tile: fix some issues in hugepage support
First, in huge_pte_offset(), we were erroneously checking
pgd_present(), which is always true, rather than pud_present(),
which is the thing that tells us if there is a top-level (L0) PTE.
Fixing this means we properly look up huge page entries only when
the Present bit is actually set in the PTE.

Second, use the standard pte_alloc_map() instead of the hand-rolled
pte_alloc_hugetlb() routine that basically was written to avoid
worrying about CONFIG_HIGHPTE.  However, we no longer plan to support
HIGHPTE, so a separate routine was just unnecessary code duplication.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:25:52 -04:00
Chris Metcalf
3ef2311154 tile: avoid recursive backtrace faults
This change adds support for avoiding recursive backtracer crashes;
we haven't seen this in practice other than when things are seriously
corrupt, but it may help avoid losing the root cause of a crash.

Also, don't abort kernel backtracers for invalid userspace PC's.
If we do, we lose the ability to backtrace through a userspace
call to a bad address above PAGE_OFFSET, even though that it can
be perfectly reasonable to continue the backtrace in such a case.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:04:14 -04:00
Chris Metcalf
2f9ac29eec tile: fast-path unaligned memory access for tilegx
This change enables unaligned userspace memory access via a kernel
fast path on tilegx.  The kernel tracks user PC/instruction pairs
per-thread using a direct-mapped cache in userspace.  The cache
maps those PC/instruction pairs to JIT'ed instruction sequences that
load or store using byte-wide load store intructions and then
synthesize 2-, 4- or 8-byte load or store results.  Once an
instruction has been seen to generate an unaligned access once,
subsequent hits on that instruction typically require overhead
of only around 50 cycles if cache and TLB is hot.

We support the prctl() PR_GET_UNALIGN / PR_SET_UNALIGN sys call to
enable or disable unaligned fixups on a per-process basis.

To do this we pull some of the tilepro unaligned support out of the
single_step.c file; tilepro uses instruction disassembly for both
single-step and unaligned access support.  Since tilegx actually has
hardware singlestep support, though, it's cleaner to keep the tilegx
unaligned access code in a separate file.  While we're at it,
properly rename the tilepro-specific types, etc., to have tilepro
suffixes instead of generic tile suffixes.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-13 16:04:10 -04:00
Chris Metcalf
f10da5472c tile: remove unnecessary backslashes in asm-offsets.c
Pointed out by checkpatch.  A few of the DEFINE() lines were
properly written without backslash continuation; fix the rest.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-12 14:46:55 -04:00
Chris Metcalf
e5f7bd4353 tile: fix tilegx vmalloc_sync_all BUG_ON
As specified, the test wasn't correct, and in any case it should
be a BUILD_BUG_ON.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-12 14:46:51 -04:00
Chris Metcalf
b63ea7121c tile: fix comment bug in sys_cmpxchg description
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-12 14:46:47 -04:00
Chris Metcalf
77f8c740d1 tile: support "memmap" boot parameter
This change adds support for the "memmap" boot parameter similar
to what x86 provides.  The tile version supports "memmap=1G$5G",
for example, as a way to reserve a 1 GB range starting at PA 5GB.
The memory is reserved via bootmem during startup, and we create a
suitable "struct resource" marked as "Reserved" so you can see the
range reported by /proc/iomem.  Up to 64 such regions can currently
be reserved on the boot command line.

We do not support the x86 options "memmap=nn@ss" (force some memory
to be available at the given address) since it's pointless to try to
have Linux use memory the Tilera hypervisor hasn't given it.  We do
not support "memmap=nn#ss" to add an ACPI range for later processing,
since we don't support ACPI.  We do not support "memmap=exactmap"
since we don't support reading the e820 information from the BIOS
like x86 does.  I did add support for "memmap=nn" (and the synonym
"mem=nn") which cap the highest PA value at "nn"; these are both
just a synonym for the existing tile boot option "maxmem".

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-12 14:46:43 -04:00
Chris Metcalf
bda0f5bad8 tile: various console improvements
This change improves and cleans up the tile console.

- We enable HVC_IRQ support on tilegx, with the addition of a new
  Tilera hypervisor API for tilegx to allow a console IPI.  If IPI
  support is not available we fall back to the previous polling mode.

- We simplify the earlyprintk code to use CON_BOOT and eliminate some
  of the other supporting earlyprintk code.

- A new tile_console_write() primitive is used to send output to
  the console and is factored out of the hvc_tile driver.
  This lets us support a "sim_console" boot argument to allow using
  simulator hooks to send output to the "console" as a slightly
  faster alternative to emulating the hardware more directly.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-12 14:46:18 -04:00
Thomas Petazzoni
ebd97be635 PCI: remove ARCH_SUPPORTS_MSI kconfig option
Now that we have weak versions for each of the PCI MSI architecture
functions, we can actually build the MSI support for all platforms,
regardless of whether they provide or not architecture-specific
versions of those functions. For this reason, the ARCH_SUPPORTS_MSI
hidden kconfig boolean becomes useless, and this patch gets rid of it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: Daniel Price <daniel.price@gmail.com>
Tested-by: Thierry Reding <thierry.reding@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: linux390@de.ibm.com
Cc: linux-s390@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: linux-ia64@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: David S. Miller <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-08-12 15:26:48 +00:00
Chris Metcalf
7c29b78a0e tile PCI RC: remove stale include of linux/numa.h
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:56:16 -04:00
Chris Metcalf
ae2031fb29 tile PCI RC: reduce driver's vmalloc space usage
We can take advantage of the fact that bit 29 is hard-wired
to zero in register TRIO_TILE_PIO_REGION_SETUP_CFG_ADDR.
This is handy since at the moment we only allocate one 4GB
region for vmalloc, and with this change we can allocate
four or more TRIO MACs without using up all the vmalloc space.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:56:12 -04:00
Chris Metcalf
5026dafa17 tile PCI RC: support PCIe TRIO 0 MAC 0 on Gx72 system
On Tilera Gx72 systems, the logic for figuring out whether
a given port is root complex is slightly different.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:56:08 -04:00
Chris Metcalf
02b67e0954 tile PCI DMA: fix bug in non-page-aligned accessors
The code incorrectly masked with PAGE_OFFSET instead of
PAGE_SIZE-1.  This only matters when trying to do a
non page-aligned DMA; it was noticed during code inspection.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:56:04 -04:00
Chris Metcalf
dc7d5cf2ca tile PCI RC: add dma_get_required_mask()
The standard kernel function dma_get_required_mask() uses the
highest DRAM address to determine if 32-bit or 64-bit DMA addressing
is needed.  This only works on architectures that have direct mapping
between the PA and the PCI address space, i.e. those that don't have
I/O TLBs or have I/O TLB but choose to use direct mapping.  Neither
of these are true for tilegx.  Whether to use 64-bit DMA should depend
on the PCI device's capability only, not on the amount of DRAM
installeds, so we now advertise a 64-bit DMA mask unconditionally.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:56:00 -04:00
Chris Metcalf
8d9e53b93d tile PCI RC: use proper accessor function
Using the low-level hv_dev_pread() API makes assumptions about the
layout of datastructures in the Tilera hypervisor API; it's better to
use the gxio_XXX accessor and the pcie_trio_ports_property struct.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:56 -04:00
Chris Metcalf
eafa5c8a10 tile PCI RC: bomb comments and whitespace format
This change is purely stylistic but improves the readability
of the tile PCI RC driver.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:52 -04:00
Chris Metcalf
f62f73f6ca tile PCI RC: include pci/pcie/Kconfig
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:48 -04:00
Chris Metcalf
1198168733 tile PCI RC: eliminate pci_controller.mem_resources field
The .mem_resources[] field in the pci_controller struct
is now obsoleted by the .mem_space and .io_space fields.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:44 -04:00
Chris Metcalf
1c43649a99 tile PCI RC: restructure TRIO initialization
The TRIO shim initialization is shared with other kernel drivers
such as the endpoint and StreamIO drivers, so reorganize the
initialization flow to ensure that the root complex driver properly
initializes TRIO state regardless of what kind of TRIO driver will
end up using the shim.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:40 -04:00
Chris Metcalf
9b6846cede tile PCI DMA: handle a NULL dev argument properly
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:36 -04:00
Chris Metcalf
cf89c4262b tile PCI RC: support I/O space access
To enable this functionality, configure CONFIG_TILE_PCI_IO.  Without
this flag, the kernel still assigns I/O address ranges to the
devices, but no TRIO resource and mapping support is provided.

We assign disjoint I/O address ranges to separate PCIe domains.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:32 -04:00
Chris Metcalf
a3c4f2fb26 tile PCI RC: gentler warning for missing plug-in PCI
Besides using pr_info() to print the linkdown status for a plug-in
slot, add extra indication that this is expected if the slot is empty.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:28 -04:00
Chris Metcalf
90d9dd6695 tile PCI RC: support more MSI-X interrupt vectors
To support PCIe devices with higher number of MSI-X interrupt vectors,
e.g. 16 for the LSI RAID card, enhance the Gx RC stack to provide more
MSI-X vectors by using the TRIO Scatter Queues, which provide 8 more
vectors in addition to ~10 from the Map Mem regions.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:55:24 -04:00
Chris Metcalf
803c874abe tile: support LSI MEGARAID SAS HBA hybrid dma_ops
The LSI MEGARAID SAS HBA suffers from the problem where it can do
64-bit DMA to streaming buffers but not to consistent buffers.
In other words, 64-bit DMA is used for disk data transfers and 32-bit
DMA must be used for control message transfers. According to LSI,
the firmware is not fully functional yet. This change implements a
kind of hybrid dma_ops to support this.

Note that on most other platforms, the 64-bit DMA addressing space is the
same as the 32-bit DMA space and they overlap the physical memory space.
No special arrangement is needed to support this kind of mixed DMA
capability.  On TILE-Gx, the 64-bit DMA space is completely separate
from the 32-bit DMA space.  Due to the use of the IOMMU, the 64-bit DMA
space doesn't overlap the physical memory space.  On the other hand,
the 32-bit DMA space overlaps the physical memory space under 4GB.
The separate address spaces make it necessary to have separate dma_ops.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-06 12:52:33 -04:00
Chris Metcalf
26cde05a2c tile PCI RC: handle case that PCI link is already up
If we are rebooting (e.g. via kexec) then the PCI RC link may
already be up.  In that case, we don't want to do the software
fixup to force the link up, since that can degrade it to Gen1.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-05 16:13:08 -04:00
Chris Metcalf
b3ad73a33e tile PCI RC: tweak the the pcie_rc_delay support
Allow longer delays if requested, and print the info messages
as we are performing the delay, not when parsing the arguments.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-05 16:13:03 -04:00
Chris Metcalf
2be705523f tile PCI RC: support pci=off boot arg for tilepro
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-05 16:12:57 -04:00
Chris Metcalf
523c178edf tile PCI RC: tilepro conflict with PCI and RAM addresses
Fix a bug in the tilepro PCI resource allocation code that could make
the bootmem allocator unhappy if 4GB is installed on mshim 0.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-05 16:12:51 -04:00
Chris Metcalf
9bbb08faa9 tile PCI RC: cleanups for tilepro PCI RC
- remove unneeded <linux/bootmem.h> include in pci.c
- eliminate unused pci_controller.first_busno field
- prefer msleep to mdelay
- remove stale comment about pci_scan_bus_parented()

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-05 16:12:38 -04:00
Ken Steele
5916700c76 tile: optimize strnlen using SIMD instructions
Using strlen as a model, add length checking to create strnlen.

Signed-off-by: Ken Steele <ken@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-01 20:08:51 -04:00
Chris Metcalf
9ab5ec59c8 tile: support PTP using the tilegx mPIPE (IEEE 1588)
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 14:35:51 -07:00
Chris Metcalf
f3286a3af8 tile: support multiple mPIPE shims in tilegx network driver
The initial driver support was for a single mPIPE shim on the chip
(as is the case for the Gx36 hardware).  The Gx72 chip has two mPIPE
shims, so we extend the driver to handle that case.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 14:35:50 -07:00
Chris Metcalf
2628e8af31 tile: support jumbo frames in the tilegx network driver
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01 14:35:50 -07:00
Chris Metcalf
c53c70a90f tile: optimize and clean up string functions
This change cleans up the string code in a number of ways:

- For memcpy(), fix bug in prefetch and increase distance to 3 lines;
  optimize for unaligned data; do all loads before wh64 to make memcpy
  safe for forward-overlapping calls; etc.  Performance is improved.

- Use new copy_byte() function on tilegx to spread a single byte value
  out into a full word using the shufflebytes instruction.

- Clean up header include ordering to be more canonical, and remove
  spurious #undefs of function names.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-08-01 16:23:12 -04:00
Chris Metcalf
dd78bc11fb tile: convert uses of "inv" to "finv"
The "inv" (invalidate) instruction is generally less safe than "finv"
(flush and invalidate), as it will drop dirty data from the cache.
It turns out we have almost no need for "inv" (other than for the
older 32-bit architecture in some limited cases), so convert to
"finv" where possible and delete the extra "inv" infrastructure.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-07-31 11:51:19 -04:00
Chris Metcalf
7d937719e3 tile: various minor cleanups to hardwall subsystem
First, clean up active hardwalls in exit_thread().  This is a better
place than in arch_release_thread_info().

Second, mask out any non-online cpus from the cpumask after
validating any required semantics of the cpu set.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-07-31 11:49:48 -04:00
Hanjun Guo
e70b091512 tile / cpu topology: remove stale Macro arch_provides_topology_pointers
Macro arch_provides_topology_pointers is pointless now, remove it.

Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-29 13:12:45 -07:00
Chen Gang
cf3a13d790 arch: tile: include: asm: add cmpxchg64() definition
Need add cmpxchg64(), or will cause compiling issue.

Need define it as cmpxchg() only for 64-bit operation, since cmpxchg()
can support 8 bytes.

The related error (with allmodconfig):

  drivers/block/blockconsole.c: In function ‘bcon_advance_console_bytes’:
  drivers/block/blockconsole.c:164:2: error: implicit declaration of function ‘cmpxchg64’ [-Werror=implicit-function-declaration]

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-07-17 12:45:38 -04:00
Paul Gortmaker
18f894c145 tile: delete __cpuinit usage from all tile files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/tile uses of the __cpuinit macros from
all C files.  Currently tile does not have any __CPUINIT used in
assembly files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:54 -04:00
Michel Lespinasse
98d1e64f95 mm: remove free_area_cache
Since all architectures have been converted to use vm_unmapped_area(),
there is no remaining use for the free_area_cache.

Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-10 18:11:34 -07:00
Johannes Weiner
609838cfed mm: invoke oom-killer from remaining unconverted page fault handlers
A few remaining architectures directly kill the page faulting task in an
out of memory situation.  This is usually not a good idea since that
task might not even use a significant amount of memory and so may not be
the optimal victim to resolve the situation.

Since 2.6.29's 1c0fe6e ("mm: invoke oom-killer from page fault") there
is a hook that architecture page fault handlers are supposed to call to
invoke the OOM killer and let it pick the right task to kill.  Convert
the remaining architectures over to this hook.

To have the previous behavior of simply taking out the faulting task the
vm.oom_kill_allocating_task sysctl can be set to 1.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>   [arch/arc bits]
Cc: James Hogan <james.hogan@imgtec.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Cc: Lennox Wu <lennox.wu@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 10:33:20 -07:00
Linus Torvalds
e61aca5158 Merge branch 'kconfig-diet' from Dave Hansen
Merge Kconfig menu diet patches from Dave Hansen:
 "I think the "Kernel Hacking" menu has gotten a bit out of hand.  It is
  over 120 lines long on my system with everything enabled and options
  are scattered around it haphazardly.

        http://sr71.net/~dave/linux/kconfig-horror.png

  Let's try to introduce some sanity.  This set takes that 120 lines
  down to 55 and makes it vastly easier to find some things.  It's a
  start.

  This set stands on its own, but there is plenty of room for follow-up
  patches.  The arch-specific debug options still end up getting stuck
  in the top-level "kernel hacking" menu.  OPTIMIZE_INLINING, for
  instance, could obviously go in to the "compiler options" menu, but
  the fact that it is defined in arch/ in a separate Kconfig file keeps
  it on its own for the moment.

  The Signed-off-by's in here look funky.  I changed employers while
  working on this set, so I have signoffs from both email addresses"

* emailed patches from Dave Hansen <dave@sr71.net>:
  hang and lockup detection menu
  kconfig: consolidate printk options
  group locking debugging options
  consolidate compilation option configs
  consolidate runtime testing configs
  order memory debugging Kconfig options
  consolidate per-arch stack overflow debugging options
2013-07-04 11:25:51 -07:00
Dave Hansen
d1a1dc0be8 consolidate per-arch stack overflow debugging options
Original posting:

	http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com

Several architectures have similar stack debugging config options.
They all pretty much do the same thing, some with slightly
differing help text.

This patch changes the architectures to instead enable a Kconfig
boolean, and then use that boolean in the generic Kconfig.debug
to present the actual menu option.  This removes a bunch of
duplication and adds consistency across arches.

Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: H. Peter Anvin <hpa@zytor.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile]
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 11:25:39 -07:00
Jiang Liu
3f29c33194 mm/tile: prepare for removing num_physpages and simplify mem_init()
Prepare for removing num_physpages and simplify mem_init().

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:37 -07:00
Jiang Liu
40a3b8df7b tile: normalize global variables exported by vmlinux.lds
Normalize global variables exported by vmlinux.lds to conform usage
guidelines from include/asm-generic/sections.h.

1) Use _text to mark the start of the kernel image including the head
text, and _stext to mark the start of the .text section.
2) Export mandatory global variables __init_begin and __init_end.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:34 -07:00
Jiang Liu
0c98853473 mm: concentrate modification of totalram_pages into the mm core
Concentrate code to modify totalram_pages into the mm core, so the arch
memory initialized code doesn't need to take care of it.  With these
changes applied, only following functions from mm core modify global
variable totalram_pages: free_bootmem_late(), free_all_bootmem(),
free_all_bootmem_node(), adjust_managed_page_count().

With this patch applied, it will be much more easier for us to keep
totalram_pages and zone->managed_pages in consistence.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Jiang Liu
abd1b6d65f mm/tile: use common help functions to free reserved pages
Use common help functions to free reserved pages.

Signed-off-by: Jiang Liu <jiang.liu@huawei.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Wen Congyang <wency@cn.fujitsu.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: <sworddragon2@aol.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Michel Lespinasse <walken@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tang Chen <tangchen@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-03 16:07:33 -07:00
Linus Torvalds
e13053f506 Merge branch 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull voluntary preemption fixes from Ingo Molnar:
 "This tree contains a speedup which is achieved through better
  might_sleep()/might_fault() preemption point annotations for uaccess
  functions, by Michael S Tsirkin:

  1. The only reason uaccess routines might sleep is if they fault.
     Make this explicit for all architectures.

  2. A voluntary preemption point in uaccess functions means compiler
     can't inline them efficiently, this breaks assumptions that they
     are very fast and small that e.g.  net code seems to make.  Remove
     this preemption point so behaviour matches with what callers
     assume.

  3. Accesses (e.g through socket ops) to kernel memory with KERNEL_DS
     like net/sunrpc does will never sleep.  Remove an unconditinal
     might_sleep() in the might_fault() inline in kernel.h (used when
     PROVE_LOCKING is not set).

  4. Accesses with pagefault_disable() return EFAULT but won't cause
     caller to sleep.  Check for that and thus avoid might_sleep() when
     PROVE_LOCKING is set.

  These changes offer a nice speedup for CONFIG_PREEMPT_VOLUNTARY=y
  kernels, here's a network bandwidth measurement between a virtual
  machine and the host:

   before:
        incoming: 7122.77   Mb/s
        outgoing: 8480.37   Mb/s

   after:
        incoming: 8619.24   Mb/s   [ +21.0% ]
        outgoing: 9455.42   Mb/s   [ +11.5% ]

  I kept these changes in a separate tree, separate from scheduler
  changes, because it's a mixed MM and scheduler topic"

* 'sched-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm, sched: Allow uaccess in atomic with pagefault_disable()
  mm, sched: Drop voluntary schedule from might_fault()
  x86: uaccess s/might_sleep/might_fault/
  tile: uaccess s/might_sleep/might_fault/
  powerpc: uaccess s/might_sleep/might_fault/
  mn10300: uaccess s/might_sleep/might_fault/
  microblaze: uaccess s/might_sleep/might_fault/
  m32r: uaccess s/might_sleep/might_fault/
  frv: uaccess s/might_sleep/might_fault/
  arm64: uaccess s/might_sleep/might_fault/
  asm-generic: uaccess s/might_sleep/might_fault/
2013-07-02 16:19:24 -07:00
Linus Torvalds
2d722f6d56 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes:

   - load-calculation cleanups and improvements, by Alex Shi
   - various nohz related tidying up of statisics, by Frederic
     Weisbecker
   - factor out /proc functions to kernel/sched/proc.c, by Paul
     Gortmaker
   - simplify the RT policy scheduler, by Kirill Tkhai
   - various fixes and cleanups"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
  sched/debug: Remove CONFIG_FAIR_GROUP_SCHED mask
  sched/debug: Fix formatting of /proc/<PID>/sched
  sched: Fix typo in struct sched_avg member description
  sched/fair: Fix typo describing flags in enqueue_entity
  sched/debug: Add load-tracking statistics to task
  sched: Change get_rq_runnable_load() to static and inline
  sched/tg: Remove tg.load_weight
  sched/cfs_rq: Change atomic64_t removed_load to atomic_long_t
  sched/tg: Use 'unsigned long' for load variable in task group
  sched: Change cfs_rq load avg to unsigned long
  sched: Consider runnable load average in move_tasks()
  sched: Compute runnable load avg in cpu_load and cpu_avg_load_per_task
  sched: Update cpu load after task_tick
  sched: Fix sleep time double accounting in enqueue entity
  sched: Set an initial value of runnable avg for new forked task
  sched: Move a few runnable tg variables into CONFIG_SMP
  Revert "sched: Introduce temporary FAIR_GROUP_SCHED dependency for load-tracking"
  sched: Don't mix use of typedef ctl_table and struct ctl_table
  sched: Remove WARN_ON(!sd) from init_sched_groups_power()
  sched: Fix memory leakage in build_sched_groups()
  ...
2013-07-02 16:17:25 -07:00
Linus Torvalds
63580e51bb Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS patches (part 1) from Al Viro:
 "The major change in this pile is ->readdir() replacement with
  ->iterate(), dealing with ->f_pos races in ->readdir() instances for
  good.

  There's a lot more, but I'd prefer to split the pull request into
  several stages and this is the first obvious cutoff point."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (67 commits)
  [readdir] constify ->actor
  [readdir] ->readdir() is gone
  [readdir] convert ecryptfs
  [readdir] convert coda
  [readdir] convert ocfs2
  [readdir] convert fatfs
  [readdir] convert xfs
  [readdir] convert btrfs
  [readdir] convert hostfs
  [readdir] convert afs
  [readdir] convert ncpfs
  [readdir] convert hfsplus
  [readdir] convert hfs
  [readdir] convert befs
  [readdir] convert cifs
  [readdir] convert freevxfs
  [readdir] convert fuse
  [readdir] convert hpfs
  reiserfs: switch reiserfs_readdir_dentry to inode
  reiserfs: is_privroot_deh() needs only directory inode, actually
  ...
2013-07-02 09:28:37 -07:00
Ingo Molnar
2fd1b48788 Linux 3.10
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQEcBAABAgAGBQJR0K2gAAoJEHm+PkMAQRiGWsEH+gMZSN1qRm34hZ82q1Tx7HvL
 Eb/Gsl3Qw/7G2TlTqgjBUs36IdqV9O2cui/aa3/TfXvdvrx+0GlhRkEwQPc+ygcO
 Mvoyoke4tT4+4jVFdCg1J8avREsa28/6oaHs0ZZxuVmJBBLTJH7aXaNsGn6eU1q9
 9+p798MQis6naIiPC63somlZcCIiBhsuWCPWpEfLMn8G1HWAFTM3xXIbNBqe/brS
 bmIOfhomlIZ5dcdaXGvjtP3+KJhkNDwhkPC4tVYu8JqqgSlrE+a+EGyEuuGqKk10
 U+swiqyuD31uBI9ga54u/2FzSqDiAu6YOcMXevjo/m3g9XLdYbYLvN+nvN8alCQ=
 =Ob6Z
 -----END PGP SIGNATURE-----

Merge tag 'v3.10' into sched/core

Merge in a recent upstream commit:

  c2853c8df5 include/linux/math64.h: add div64_ul()

because:

  72a4cf20cb sched: Change cfs_rq load avg to unsigned long

relies on it.

[ We don't rebase sched/core for this, because the handful of
  followup commits after the broken commit are not behavioral
  changes so are unlikely to be needed during bisection. ]

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-01 11:18:53 +02:00
Al Viro
40d158e618 consolidate io_remap_pfn_range definitions
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-29 12:46:35 +04:00
Viresh Kumar
0a0fca9d83 sched: Rename sched.c as sched/core.c in comments and Documentation
Most of the stuff from kernel/sched.c was moved to kernel/sched/core.c long time
back and the comments/Documentation never got updated.

I figured it out when I was going through sched-domains.txt and so thought of
fixing it globally.

I haven't crossed check if the stuff that is referenced in sched/core.c by all
these files is still present and hasn't changed as that wasn't the motive behind
this patch.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/cdff76a265326ab8d71922a1db5be599f20aad45.1370329560.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-06-19 12:58:42 +02:00
Chris Metcalf
3cb3f839d3 tilepro: work around module link error with gcc 4.7
gcc 4.7.x is emitting calls to __ffsdi2 where previously
it used to inline the appropriate ctz instructions.
While this needs to be fixed in gcc, it's also easy to avoid
having it cause build failures when building with those
compilers by exporting __ffsdi2 to modules.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: stable@kernel.org
2013-06-15 16:47:47 -04:00
Michael S. Tsirkin
f8abe86cc4 tile: uaccess s/might_sleep/might_fault/
The only reason uaccess routines might sleep
is if they fault. Make this explicit.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1369577426-26721-8-git-send-email-mst@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-05-28 09:41:09 +02:00
Linus Torvalds
b32729b1ee Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull tile update from Chris Metcalf:
 "The interesting bug fix is support for the upcoming "4.2" release of
  the Tilera hypervisor, which by default launches Linux at privilege
  level 2 instead of 1.  The fix lets new and old hypervisors and
  Linuxes interoperate more smoothly, so I've tagged it for
  stable@kernel.org so that older Linuxes will be able to boot under the
  newer hypervisor."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  usb: tilegx: fix memleak when create hcd fail
  arch/tile: remove inline marking of EXPORT_SYMBOL functions
  rtc: rtc-tile: add missing platform_device_unregister() when module exit
  tile: support new Tilera hypervisor
2013-05-09 14:34:58 -07:00
Denis Efremov
4833d7f0a8 arch/tile: remove inline marking of EXPORT_SYMBOL functions
EXPORT_SYMBOL and inline directives are contradictory to each other.
The patch fixes this inconsistency.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Denis Efremov <yefremov.denis@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-05-09 13:53:45 -04:00
Chris Metcalf
c539914dcd tile: support new Tilera hypervisor
The Tilera hypervisor shipped in releases up through MDE 4.1 launches
the client operating system (i.e. Linux) at privilege level 1 (PL1).
Starting with MDE 4.2, as part of the work to enable KVM, the
Tilera hypervisor launches Linux at PL2 instead.

This commit makes the KERNEL_PL option default to 2 for tilegx, while
still saying at 1 for tilepro, which doesn't have an updated hypervisor.
It also explains how and when you might want to choose another value.
In addition, we change a small buglet in the on-chip Ethernet driver,
where we were failing to use the KERNEL_PL constant in an API call.

To make the transition cleaner, this change also provides the updated
hv_init() API for the new hypervisor that supports announcing Linux's
compiled-in PL, so the hypervisor can generate a suitable error in the
case of a mismatched hypervisor and Linux binary.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: stable@vger.linux.org
2013-05-02 16:20:31 -04:00
Linus Torvalds
20b4fb4852 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull VFS updates from Al Viro,

Misc cleanups all over the place, mainly wrt /proc interfaces (switch
create_proc_entry to proc_create(), get rid of the deprecated
create_proc_read_entry() in favor of using proc_create_data() and
seq_file etc).

7kloc removed.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits)
  don't bother with deferred freeing of fdtables
  proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h
  proc: Make the PROC_I() and PDE() macros internal to procfs
  proc: Supply a function to remove a proc entry by PDE
  take cgroup_open() and cpuset_open() to fs/proc/base.c
  ppc: Clean up scanlog
  ppc: Clean up rtas_flash driver somewhat
  hostap: proc: Use remove_proc_subtree()
  drm: proc: Use remove_proc_subtree()
  drm: proc: Use minor->index to label things, not PDE->name
  drm: Constify drm_proc_list[]
  zoran: Don't print proc_dir_entry data in debug
  reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show()
  proc: Supply an accessor for getting the data from a PDE's parent
  airo: Use remove_proc_subtree()
  rtl8192u: Don't need to save device proc dir PDE
  rtl8187se: Use a dir under /proc/net/r8180/
  proc: Add proc_mkdir_data()
  proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h}
  proc: Move PDE_NET() to fs/proc/proc_net.c
  ...
2013-05-01 17:51:54 -07:00
Linus Torvalds
8a72f3820c Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull tile arch changes from Chris Metcalf:
 "These are some minor new feature work and other changes that didn't
  merit getting pushed up after the 3.9 merge window closed.

  There should be a lot more activity in the 3.11 merge window"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: Fix syscall return value passed to tracepoint
  tile: comment assumption about __insn_mtspr for <asm/irqflags.h>
  tile: ns2cycles should use __raw_get_cpu_var
  arch: remove KCORE_ELF again [tile]
  tile: remove two outdated Kconfig entries
  tile: support atomic64_dec_if_positive()
  tile: support TIF_SYSCALL_TRACEPOINT; select HAVE_SYSCALL_TRACEPOINTS
  tile: Add definition of NR_syscalls
  tile: move declaration of sys_call_table to <asm/syscall.h>
  arch/tile: Enable HAVE_ARCH_TRACEHOOK
  arch/tile: Call tracehook_report_syscall_{entry,exit} in syscall trace
2013-05-01 10:48:34 -07:00
Linus Torvalds
08d7676083 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal
Pull compat cleanup from Al Viro:
 "Mostly about syscall wrappers this time; there will be another pile
  with patches in the same general area from various people, but I'd
  rather push those after both that and vfs.git pile are in."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal:
  syscalls.h: slightly reduce the jungles of macros
  get rid of union semop in sys_semctl(2) arguments
  make do_mremap() static
  sparc: no need to sign-extend in sync_file_range() wrapper
  ppc compat wrappers for add_key(2) and request_key(2) are pointless
  x86: trim sys_ia32.h
  x86: sys32_kill and sys32_mprotect are pointless
  get rid of compat_sys_semctl() and friends in case of ARCH_WANT_OLD_COMPAT_IPC
  merge compat sys_ipc instances
  consolidate compat lookup_dcookie()
  convert vmsplice to COMPAT_SYSCALL_DEFINE
  switch getrusage() to COMPAT_SYSCALL_DEFINE
  switch epoll_pwait to COMPAT_SYSCALL_DEFINE
  convert sendfile{,64} to COMPAT_SYSCALL_DEFINE
  switch signalfd{,4}() to COMPAT_SYSCALL_DEFINE
  make SYSCALL_DEFINE<n>-generated wrappers do asmlinkage_protect
  make HAVE_SYSCALL_WRAPPERS unconditional
  consolidate cond_syscall and SYSCALL_ALIAS declarations
  teach SYSCALL_DEFINE<n> how to deal with long long/unsigned long long
  get rid of duplicate logics in __SC_....[1-6] definitions
2013-05-01 07:21:43 -07:00
Stephen Boyd
446f24d119 Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS
The help text for this config is duplicated across the x86, parisc, and
s390 Kconfig.debug files.  Arnd Bergman noted that the help text was
slightly misleading and should be fixed to state that enabling this
option isn't a problem when using pre 4.4 gcc.

To simplify the rewording, consolidate the text into lib/Kconfig.debug
and modify it there to be more explicit about when you should say N to
this config.

Also, make the text a bit more generic by stating that this option
enables compile time checks so we can cover architectures which emit
warnings vs.  ones which emit errors.  The details of how an
architecture decided to implement the checks isn't as important as the
concept of compile time checking of copy_from_user() calls.

While we're doing this, remove all the copy_from_user_overflow() code
that's duplicated many times and place it into lib/ so that any
architecture supporting this option can get the function for free.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Helge Deller <deller@gmx.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:09 -07:00
Tejun Heo
a43cb95d54 dump_stack: unify debug information printed by show_regs()
show_regs() is inherently arch-dependent but it does make sense to print
generic debug information and some archs already do albeit in slightly
different forms.  This patch introduces a generic function to print debug
information from show_regs() so that different archs print out the same
information and it's much easier to modify what's printed.

show_regs_print_info() prints out the same debug info as dump_stack()
does plus task and thread_info pointers.

* Archs which didn't print debug info now do.

  alpha, arc, blackfin, c6x, cris, frv, h8300, hexagon, ia64, m32r,
  metag, microblaze, mn10300, openrisc, parisc, score, sh64, sparc,
  um, xtensa

* Already prints debug info.  Replaced with show_regs_print_info().
  The printed information is superset of what used to be there.

  arm, arm64, avr32, mips, powerpc, sh32, tile, unicore32, x86

* s390 is special in that it used to print arch-specific information
  along with generic debug info.  Heiko and Martin think that the
  arch-specific extra isn't worth keeping s390 specfic implementation.
  Converted to use the generic version.

Note that now all archs print the debug info before actual register
dumps.

An example BUG() dump follows.

 kernel BUG at /work/os/work/kernel/workqueue.c:4841!
 invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
 Modules linked in:
 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7
 Hardware name: empty empty/S3992, BIOS 080011  10/26/2007
 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000
 RIP: 0010:[<ffffffff8234a07e>]  [<ffffffff8234a07e>] init_workqueues+0x4/0x6
 RSP: 0000:ffff88007c861ec8  EFLAGS: 00010246
 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001
 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a
 RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a
 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
 CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
 Stack:
  ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650
  0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d
  ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760
 Call Trace:
  [<ffffffff81000312>] do_one_initcall+0x122/0x170
  [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8
  [<ffffffff81c47760>] ? rest_init+0x140/0x140
  [<ffffffff81c4776e>] kernel_init+0xe/0xf0
  [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0
  [<ffffffff81c47760>] ? rest_init+0x140/0x140
  ...

v2: Typo fix in x86-32.

v3: CPU number dropped from show_regs_print_info() as
    dump_stack_print_info() has been updated to print it.  s390
    specific implementation dropped as requested by s390 maintainers.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>		[tile bits]
Acked-by: Richard Kuo <rkuo@codeaurora.org>		[hexagon bits]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:02 -07:00
Linus Torvalds
8700c95adb Merge branch 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP/hotplug changes from Ingo Molnar:
 "This is a pretty large, multi-arch series unifying and generalizing
  the various disjunct pieces of idle routines that architectures have
  historically copied from each other and have grown in random, wildly
  inconsistent and sometimes buggy directions:

   101 files changed, 455 insertions(+), 1328 deletions(-)

  this went through a number of review and test iterations before it was
  committed, it was tested on various architectures, was exposed to
  linux-next for quite some time - nevertheless it might cause problems
  on architectures that don't read the mailing lists and don't regularly
  test linux-next.

  This cat herding excercise was motivated by the -rt kernel, and was
  brought to you by Thomas "the Whip" Gleixner."

* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
  idle: Remove GENERIC_IDLE_LOOP config switch
  um: Use generic idle loop
  ia64: Make sure interrupts enabled when we "safe_halt()"
  sparc: Use generic idle loop
  idle: Remove unused ARCH_HAS_DEFAULT_IDLE
  bfin: Fix typo in arch_cpu_idle()
  xtensa: Use generic idle loop
  x86: Use generic idle loop
  unicore: Use generic idle loop
  tile: Use generic idle loop
  tile: Enter idle with preemption disabled
  sh: Use generic idle loop
  score: Use generic idle loop
  s390: Use generic idle loop
  powerpc: Use generic idle loop
  parisc: Use generic idle loop
  openrisc: Use generic idle loop
  mn10300: Use generic idle loop
  mips: Use generic idle loop
  microblaze: Use generic idle loop
  ...
2013-04-30 07:50:17 -07:00
Thomas Gleixner
d0380e6c3c early_printk: consolidate random copies of identical code
The early console implementations are the same all over the place.  Move
the print function to kernel/printk and get rid of the copies.

[akpm@linux-foundation.org: arch/mips/kernel/early_printk.c needs kernel.h for va_list]
[paul.gortmaker@windriver.com: sh4: make the bios early console support depend on EARLY_PRINTK]
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Richard Weinberger <richard@nod.at>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 18:28:13 -07:00
Joonsoo Kim
ef93247325 mm, vmalloc: change iterating a vmlist to find_vm_area()
This patchset removes vm_struct list management after initializing
vmalloc.  Adding and removing an entry to vmlist is linear time
complexity, so it is inefficient.  If we maintain this list, overall
time complexity of adding and removing area to vmalloc space is O(N),
although we use rbtree for finding vacant place and it's time complexity
is just O(logN).

And vmlist and vmlist_lock is used many places of outside of vmalloc.c.
It is preferable that we hide this raw data structure and provide
well-defined function for supporting them, because it makes that they
cannot mistake when manipulating theses structure and it makes us easily
maintain vmalloc layer.

For kexec and makedumpfile, I export vmap_area_list, instead of vmlist.
This comes from Atsushi's recommendation.  For more information, please
refer below link.  https://lkml.org/lkml/2012/12/6/184

This patch:

The purpose of iterating a vmlist is finding vm area with specific virtual
address.  find_vm_area() is provided for this purpose and more efficient,
because it uses a rbtree.  So change it.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Atsushi Kumagai <kumagai-atsushi@mxc.nes.nec.co.jp>
Cc: Dave Anderson <anderson@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:33 -07:00
Gerald Schaefer
106c992a5e mm/hugetlb: add more arch-defined huge_pte functions
Commit abf09bed3c ("s390/mm: implement software dirty bits")
introduced another difference in the pte layout vs.  the pmd layout on
s390, thoroughly breaking the s390 support for hugetlbfs.  This requires
replacing some more pte_xxx functions in mm/hugetlbfs.c with a
huge_pte_xxx version.

This patch introduces those huge_pte_xxx functions and their generic
implementation in asm-generic/hugetlb.h, which will now be included on
all architectures supporting hugetlbfs apart from s390.  This change
will be a no-op for those architectures.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Hillf Danton <dhillf@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.cz>	[for !s390 parts]
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-29 15:54:33 -07:00
Simon Marchi
9fc1894c98 arch/tile: Fix syscall return value passed to tracepoint
Currently the syscall number is passed, but it should be the return
value, which is kept in r0.

Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> [using a raw 0 value]
2013-04-24 16:45:55 -04:00
Thomas Gleixner
d190e8195b idle: Remove GENERIC_IDLE_LOOP config switch
All archs are converted over. Remove the config switch and the
fallback code.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-17 10:39:38 +02:00
Al Viro
d9dda78bad procfs: new helper - PDE_DATA(inode)
The only part of proc_dir_entry the code outside of fs/proc
really cares about is PDE(inode)->data.  Provide a helper
for that; static inline for now, eventually will be moved
to fs/proc, along with the knowledge of struct proc_dir_entry
layout.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09 14:13:32 -04:00
Chris Metcalf
3e2e0d2c22 tile: comment assumption about __insn_mtspr for <asm/irqflags.h>
The arch_local_irq_save(), etc., routines are required to function
as compiler barriers.  They do, but it's subtle and requires knowing
that the gcc builtin __insn_mtspr() is marked as a memory clobber.
Provide a comment explaining the assumption.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
[ This came about from me wondering about the synchronization rules of
  __insn_mtspr()   - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-09 10:08:14 -07:00
Chris Metcalf
ffae3d0e36 tile: comment assumption about __insn_mtspr for <asm/irqflags.h>
The arch_local_irq_save(), etc., routines are required to function
as compiler barriers.  They do, but it's subtle and requires knowing
that the gcc builtin __insn_mtspr() is marked as a memory clobber.
Provide a comment explaining the assumption.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2013-04-09 12:33:07 -04:00
Thomas Gleixner
0dc8153cfe tile: Use generic idle loop
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20130321215235.348460344@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08 17:39:28 +02:00
Thomas Gleixner
e26ef8fe72 tile: Enter idle with preemption disabled
cpu_idle() needs to be called with preemption disabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Link: http://lkml.kernel.org/r/20130321215235.280451779@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08 17:39:28 +02:00
Thomas Gleixner
ee761f629d arch: Consolidate tsk_is_polling()
Move it to a common place. Preparatory patch for implementing
set/clear for the idle need_resched poll implementation.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Link: http://lkml.kernel.org/r/20130321215233.446034505@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-08 17:39:22 +02:00
Linus Torvalds
3658f36040 Merge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile fix from Chris Metcalf:
 "This change allows newer Tilera boot tools to work correctly with
  current (and stable) kernels by using the right filename to get the
  initramfs from the Tilera hypervisor filesystem."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: expect new initramfs name from hypervisor file system
2013-04-01 08:17:09 -07:00