The adis1648x devices have an internal clock of 2.46 kSPS. The sampling
frequency is calculated by applying a decimation rate which can take the
maximum value of 2047.
Although all adis1648x devices are similar in this regard, devices that
will use this feature will be added in the future.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All supported devices provide internal temperature measurement from -40 C
to +85 C, with +25 C representing value 0x00.
This patch treats the temperature scale in a generic way, similar to the
accelerometer and gyroscope scales. So far, there are no temperature max
scale differences between the supported devices. However, devices that
will make use of this feature will be added in the future.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The driver does not have a struct of_device_id table, but supported
devices are registered via Device Trees. This patch adds OF device ID
table.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The FNCTIO_CTRL register provides configuration control for each I/O pin
(DIO1, DIO2, DIO3 and DIO4).
This patch adds the option to configure each DIOx pin as data ready
indicator with positive or negative polarity by reading the 'interrupts'
and 'interrupt-names' properties from the devicetree. The
'interrupt-names' property is optional, if it is not specified, then the
DIO1 pin is used as default data ready signal.
Although the factory default assigns DIO2 as data ready signal, in the
versions previous this patch, DIO1 pin was used. We should leave this
configuration as is, since some devices might be expecting the interrupt
on the wrong physical pin.
Signed-off-by: Stefan Popa <stefan.popa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Indio->mlock is used for protecting the different iio device modes.
It is currently not being used in this way. Replace the lock with
an internal lock specifically used for protecting the SPI transfer
buffer.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If there are more trigger consumers than
CONFIG_IIO_CONSUMERS_PER_TRIGGER, iio_trigger_attach_poll_func will
silently fail. Add an error message to inform the user that
CONFIG_IIO_CONSUMERS_PER_TRIGGER limit might be exceeded.
Signed-off-by: Mathieu Othacehe <m.othacehe@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.
This patch fixes the following warning:
drivers/iio/accel/mma8452.c: In function ‘mma8452_probe’:
drivers/iio/accel/mma8452.c:1581:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (ret == data->chip_info->chip_id)
^
drivers/iio/accel/mma8452.c:1584:2: note: here
default:
^~~~~~~
Warning level 3 was used: -Wimplicit-fallthrough=3
Notice that, in this particular case, the code comment is modified
in accordance with what GCC is expecting to find.
This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add other sensors to the compatible list.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add other sensors to the compatible list.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
unlikely has already included in IS_ERR(),
so just remove redundant unlikely annotation.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On top of this, a cleanup of kvm_para.h headers, which were exported by
some architectures even though they not support KVM at all. This is
responsible for all the Kbuild changes in the diffstat.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJcoM5VAAoJEL/70l94x66DU3EH/A8sYdsfeqALWElm2Sy9TYas
mntz+oTWsl3vDy8s8zp1ET2NpF7oBlBEMmCWhVEJaD+1qW3VpTRAseR3Zr9ML9xD
k+BQM8SKv47o86ZN+y4XALl30Ckb3DXh/X1xsrV5hF6J3ofC+Ce2tF560l8C9ygC
WyHDxwNHMWVA/6TyW3mhunzuVKgZ/JND9+0zlyY1LKmUQ0BQLle23gseIhhI0YDm
B4VGIYU2Mf8jCH5Ir3N/rQ8pLdo8U7f5P/MMfgXQafksvUHJBg6B6vOhLJh94dLh
J2wixYp1zlT0drBBkvJ0jPZ75skooWWj0o3otEA7GNk/hRj6MTllgfL5SajTHZg=
=/A7u
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A collection of x86 and ARM bugfixes, and some improvements to
documentation.
On top of this, a cleanup of kvm_para.h headers, which were exported
by some architectures even though they not support KVM at all. This is
responsible for all the Kbuild changes in the diffstat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
KVM: doc: Document the life cycle of a VM and its resources
KVM: selftests: complete IO before migrating guest state
KVM: selftests: disable stack protector for all KVM tests
KVM: selftests: explicitly disable PIE for tests
KVM: selftests: assert on exit reason in CR4/cpuid sync test
KVM: x86: update %rip after emulating IO
x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
kvm: don't redefine flags as something else
kvm: mmu: Used range based flushing in slot_handle_level_range
KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
KVM: Reject device ioctls from processes other than the VM's creator
KVM: doc: Fix incorrect word ordering regarding supported use of APIs
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
...
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 updates:
- Prevent exceeding he valid physical address space in the /dev/mem
limit checks.
- Move all header content inside the header guard to prevent compile
failures.
- Fix the bogus __percpu annotation in this_cpu_has() which makes
sparse very noisy.
- Disable switch jump tables completely when retpolines are enabled.
- Prevent leaking the trampoline address"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/realmode: Make set_real_mode_mem() static inline
x86/cpufeature: Fix __percpu annotation in this_cpu_has()
x86/mm: Don't exceed the valid physical address space
x86/retpolines: Disable switch jump tables when retpolines are enabled
x86/realmode: Don't leak the trampoline kernel address
x86/boot: Fix incorrect ifdeffery scope
x86/resctrl: Remove unused variable
Pull perf tooling fixes from Thomas Gleixner:
"Core libraries:
- Fix max perf_event_attr.precise_ip detection.
- Fix parser error for uncore event alias
- Fixup ordering of kernel maps after obtaining the main kernel map
address.
Intel PT:
- Fix TSC slip where A TSC packet can slip past MTC packets so that
the timestamp appears to go backwards.
- Fixes for exported-sql-viewer GUI conversion to python3.
ARM coresight:
- Fix the build by adding a missing case value for enumeration value
introduced in newer library, that now is the required one.
tool headers:
- Syncronize kernel headers with the kernel, getting new io_uring and
pidfd_send_signal syscalls so that 'perf trace' can handle them"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf pmu: Fix parser error for uncore event alias
perf scripts python: exported-sql-viewer.py: Fix python3 support
perf scripts python: exported-sql-viewer.py: Fix never-ending loop
perf machine: Update kernel map address and re-order properly
tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources
tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd
tools headers uapi: Update drm/i915_drm.h
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition
tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h
perf evsel: Fix max perf_event_attr.precise_ip detection
perf intel-pt: Fix TSC slip
perf cs-etm: Add missing case value
Pull CPU hotplug fixes from Thomas Gleixner:
"Two SMT/hotplug related fixes:
- Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup
aborts. This is triggered with the 'nosmt' command line option, but
can happen by any abort condition. As the real unplug code is not
compiled in, prevent the fail by keeping the CPU in zombie state.
- Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation
completely. With 'nosmt' being a popular option it's required to
unplug the half brought up sibling CPUs (due to the MCE wreckage)
completely"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y
cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n
Pull locking fixlet from Thomas Gleixner:
"Trivial update to the maintainers file"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove deleted file from futex file pattern
Pull core fixes from Thomas Gleixner:
"A small set of core updates:
- Make the watchdog respect the selected CPU mask again. That was
broken by the rework of the watchdog thread management and caused
inconsistent state and NMI watchdog being unstoppable.
- Ensure that the objtool build can find the libelf location.
- Remove dead kcore stub code"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Respect watchdog cpumask on CPU hotplug
objtool: Query pkg-config for libelf location
proc/kcore: Remove unused kclist_add_remap()
Three non-regression fixes.
Our optimised memcmp could read past the end of one of the buffers and
potentially trigger a page fault leading to an oops.
Some of our code to read energy management data on PowerVM had an endian bug
leading to bogus results.
When reporting a machine check exception we incorrectly reported TLB multihits
as D-Cache multhits due to a missing entry in the array of causes.
Thanks to:
Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar, Segher Boessenkool,
Vaidyanathan Srinivasan.
-----BEGIN PGP SIGNATURE-----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=Ugv6
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Three non-regression fixes.
- Our optimised memcmp could read past the end of one of the buffers
and potentially trigger a page fault leading to an oops.
- Some of our code to read energy management data on PowerVM had an
endian bug leading to bogus results.
- When reporting a machine check exception we incorrectly reported
TLB multihits as D-Cache multhits due to a missing entry in the
array of causes.
Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar,
Segher Boessenkool, Vaidyanathan Srinivasan"
* tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/mce: Fix misleading print for TLB mutlihit
powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes
powerpc/64: Fix memcmp reading past the end of src/dest
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQUwxxKyE5l/npt8ARiEGxRG/Sl2wUCXJ+ymAAKCRBiEGxRG/Sl
2yIKAQCnxxzaaCfoXtnYnpgtSZApKX+ifpkImh1WOvly+HLE4QEA3i3Bg4pb23ck
fClCFU9sahuxJbakWD0pvs4k77I1GQY=
=5KCa
-----END PGP SIGNATURE-----
Merge tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
- fix refcnt leak on interface rename
- use memcpy in device_name_store() to avoid including garbage from a
previous, longer value in the device_name
- fix a potential NULL pointer dereference in case of_match_device()
cannot find a match
* tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: trigger: netdev: use memcpy in device_name_store
leds: pca9532: fix a potential NULL pointer dereference
leds: trigger: netdev: fix refcnt leak on interface rename
Remove parentheses on right hand side of expression. Issue found with
Coccinelle.
Signed-off-by: Nishka Dasgupta <nishka.dasgupta@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Challenge suggested by coccinelle.
Return value directly without saving it in a variable and remove that
variable.
Signed-off-by: Payal Kshirsagar <payal.s.kshirsagar.98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Challenge suggested by coccinelle.
Return value directly without saving it in a variable and remove that
variable.
Signed-off-by: Payal Kshirsagar <payal.s.kshirsagar.98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Revert the extended use of gpio_set_config() and think about
how we can do this properly.
- Fix up the SPI CS GPIO handling so it now works properly on
the SPI bus children, as intended.
- Error paths and driver fixes.
-----BEGIN PGP SIGNATURE-----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=6ndO
-----END PGP SIGNATURE-----
Merge tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"As you can see [in the git history] I was away on leave and Bartosz
kindly stepped in and collected a slew of fixes, I pulled them into my
tree in two sets and merged some two more fixes (fixing my own caused
bugs) on top.
Summary:
- Revert the extended use of gpio_set_config() and think about how we
can do this properly.
- Fix up the SPI CS GPIO handling so it now works properly on the SPI
bus children, as intended.
- Error paths and driver fixes"
* tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mockup: use simple_read_from_buffer() in debugfs read callback
gpio: of: Fix of_gpiochip_add() error path
gpio: of: Check for "spi-cs-high" in child instead of parent node
gpio: of: Check propname before applying "cs-gpios" quirks
gpio: mockup: fix debugfs read
Revert "gpio: use new gpio_set_config() helper in more places"
gpio: aspeed: fix a potential NULL pointer dereference
gpio: amd-fch: Fix bogus SPDX identifier
gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input
gpio: exar: add a check for the return value of ida_simple_get fails
If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example
# cat device_name
# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32
I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.
This is also preparation for future patches.
Fixes: 06f502f57d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
In case of_match_device cannot find a match, return -EINVAL to avoid
NULL pointer dereference.
Fixes: fa4191a609 ("leds: pca9532: Add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Here are some small staging driver fixes for 5.1-rc3, and one driver
removal.
The biggest thing here is the removal of the mt7621-eth driver as a
"real" network driver was merged in 5.1-rc1 for this hardware, so this
old driver can now be removed.
Other than that, there are just a number of small fixes, all resolving
reported issues and some potential corner cases for error handling
paths.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXJ8vpg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yksHgCeJATLFpgiWqGvR8K/PfiG2QixudEAoMivMAM2
s1Obj1TFIQK+xTAINt6U
=uJaK
-----END PGP SIGNATURE-----
Merge tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.1-rc3, and one driver
removal.
The biggest thing here is the removal of the mt7621-eth driver as a
"real" network driver was merged in 5.1-rc1 for this hardware, so this
old driver can now be removed.
Other than that, there are just a number of small fixes, all resolving
reported issues and some potential corner cases for error handling
paths.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt6655: Remove vif check from vnt_interrupt
staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()
staging: octeon-ethernet: fix incorrect PHY mode
staging: vc04_services: Fix an error code in vchiq_probe()
staging: erofs: fix error handling when failed to read compresssed data
staging: vt6655: Fix interrupt race condition on device start up.
staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc
staging: rtl8712: uninitialized memory in read_bbreg_hdl()
staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference
staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc
staging, mt7621-pci: fix build without pci support
staging: speakup_soft: Fix alternate speech with other synths
staging: axis-fifo: add CONFIG_OF dependency
staging: olpc_dcon_xo_1: add missing 'const' qualifier
staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest
staging: erofs: fix to handle error path of erofs_vmap()
staging: mt7621-dts: update ethernet settings.
staging: remove mt7621-eth
Here are some small tty and serial driver fixes for 5.1-rc3.
Nothing major here, just a number of potential problems fixes for error
handling paths, as well as some other minor bugfixes for reported issues
with 5.1-rc1.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXJ8wCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylWigCfSPVnxuGsNFTZIN8CUMBH4I5cmjkAnjrN3NdS
Sumt55mskpi/Ht+5UWmw
=LFqo
-----END PGP SIGNATURE-----
Merge tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.1-rc3.
Nothing major here, just a number of potential problems fixes for
error handling paths, as well as some other minor bugfixes for
reported issues with 5.1-rc1.
All of these have been in linux-next with no reported issues"
* tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix NULL pointer issue when tty_port ops is not set
Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
dt-bindings: serial: Add compatible for Mediatek MT8183
tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
tty/serial: atmel: Add is_half_duplex helper
serial: sh-sci: Fix setting SCSCR_TIE while transferring data
serial: ar933x_uart: Fix build failure with disabled console
tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup
sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()
tty: mxs-auart: fix a potential NULL pointer dereference
tty: atmel_serial: fix a potential NULL pointer dereference
serial: max310x: Fix to avoid potential NULL pointer dereference
serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
Here are some small USB fixes for 5.1-rc3.
Nothing major at all here, just a small collection of fixes for reported
issues, and potential problems with error handling paths. Also a few
new device ids, as normal.
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXJ8wdQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn4iwCeJJST7rZyr/PO5lD8nm90y6WesawAn0WR2jEZ
TR6natKYdZq5SVfLo0y/
=MFul
-----END PGP SIGNATURE-----
Merge tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.1-rc3.
Nothing major at all here, just a small collection of fixes for
reported issues, and potential problems with error handling paths.
Also a few new device ids, as normal.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Olicard 600
USB: serial: cp210x: add new device id
usb: u132-hcd: fix resource leak
usb: cdc-acm: fix race during wakeup blocking TX traffic
usb: mtu3: fix EXTCON dependency
usb: usb251xb: fix to avoid potential NULL pointer dereference
usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
xhci: Don't let USB3 ports stuck in polling state prevent suspend
usb: xhci: dbc: Don't free all memory with spinlock held
xhci: Fix port resume done detection for SS ports with LPM enabled
USB: serial: mos7720: fix mos_parport refcount imbalance on error path
USB: gadget: f_hid: fix deadlock in f_hidg_write()
usb: gadget: net2272: Fix net2272_dequeue()
usb: gadget: net2280: Fix net2280_dequeue()
usb: gadget: net2280: Fix overrun of OUT messages
usb: dwc3: pci: add support for Comet Lake PCH ID
usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0
usb: common: Consider only available nodes for dr_mode
usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps
...
Correct a previous attempt to make Linux use its own set of ACPI debug
flags different from the upstream ACPICA's default (Erik Schmauss).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=Ze64
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This corrects a previous attempt to make Linux use its own set of ACPI
debug flags different from the upstream ACPICA's default (Erik
Schmauss)"
* tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: use different default debug value than ACPICA
- Fix the ACPI CPPC library to actually follow the specification
when decoding the guaranteed performance register information and
make the intel_pstate driver to fall back to the nominal frequency
when reporting the base frequency if the guaranteed performance
register information is not there (Srinivas Pandruvada).
- Fix use-after-free in the exit callback of the scpi-cpufreq left
after an update during the 5.0 development cycle (Vincent Stehlé).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJcnrgVAAoJEILEb/54YlRxd2gP+wVnP59rau3k6ek+b8E3c0bR
zPTUY4dKH+26gvqNWC1BR65annmUsBB0ow440Gvcr4Azk5H++xtTNmBLHyN3UJYx
V8ioKzOyKAUZ7OvpH2NCdV21kM8D8XpKM2E3+4GtqoxPhEu9SnxMOzk4Cqj462gy
ABVd9wE+okH4PFdtFL6GIhInqlKwgvRX/r/ssrb+dVJok0O6qjlWBOiDqfx18uXY
Z3nf/dpsscVoQKp28FAcXTlCY1Cq9yhd+2BVyA01FiJ3t3P2tyS0CWnSWxEaDgJR
AvrBibv9pKLGkH7MfgozQR9AOHHWFeyytPlbvgvOUjhr/Mg8lnZJXIFdUyKLk6hE
VRCIowqNGgEQxDwFFMlDKl8te7N9ay2K84bwnladI+YVKP4r3DNepD60dlBy90lh
f2+PO+l8Xs+8HGT5uNRk+0gbKL9ZZ/9GsQ0cON0KAO5B5XVJMk/zz+V6/L0jsIeN
sdRMiv+eia/x3uDX9PA4YXX/wRIOqgZSR6QZP2+xibPMdG14DU/tGPKUmPerlAo5
SqA8g2TR45U+fcX+dMvMIscuXVVy3/NuuLDEX6WVx4QxXNvgUdDratpl05wSrYQ3
nJ5WERblXUr/GX3MtWCP2om0/xph3XFJiFpMxLF0NFVJ+EK/+YFoBhDD4gLqx0id
rr47o4gjU0BvVL/hdU9f
=mhtx
-----END PGP SIGNATURE-----
Merge tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix CPU base frequency reporting in the intel_pstate driver and
a use-after-free in the scpi-cpufreq driver.
Specifics:
- Fix the ACPI CPPC library to actually follow the specification when
decoding the guaranteed performance register information and make
the intel_pstate driver to fall back to the nominal frequency when
reporting the base frequency if the guaranteed performance register
information is not there (Srinivas Pandruvada).
- Fix use-after-free in the exit callback of the scpi-cpufreq left
after an update during the 5.0 development cycle (Vincent Stehlé)"
* tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scpi: Fix use after free
cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency
ACPI / CPPC: Fix guaranteed performance handling
Pull security layer fixes from James Morris:
"Yama and LSM config fixes"
* 'fixes-v5.1-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig"
Yama: mark local symbols as static
Removes unnecessary parentheses while returning an expression.Issue
found using coccinelle.
Semantic patch used to solve the problem is as follows:
@@
expression e;
@@
return
-(
e
-)
;
Signed-off-by: Vatsala Narang <vatsalanarang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move the constant to the right side of comparison to get rid of
checkpatch warning.
Signed-off-by: Vatsala Narang <vatsalanarang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove unnecessary space after a cast to get rid of checkpatch warning.
Signed-off-by: Vatsala Narang <vatsalanarang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add trailing */ on a separate line for block comments to get rid of
checkpatch warning.
Signed-off-by: Vatsala Narang <vatsalanarang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Challenge suggested by coccinelle.
Remove unnecessary parentheses around the right hand side of an
assignment.
Signed-off-by: Payal Kshirsagar <payal.s.kshirsagar.98@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge misc fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
fs: fs_parser: fix printk format warning
checkpatch: add %pt as a valid vsprintf extension
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
drivers/block/zram/zram_drv.c: fix idle/writeback string compare
mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()
mm/memory_hotplug.c: fix notification in offline error path
ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK
fs/proc/kcore.c: make kcore_modules static
include/linux/list.h: fix list_is_first() kernel-doc
mm/debug.c: fix __dump_page when mapping->host is not set
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
include/linux/hugetlb.h: convert to use vm_fault_t
iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging
mm: add support for kmem caches in DMA32 zone
ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
mm/hotplug: fix offline undo_isolate_page_range()
fs/open.c: allow opening only regular files during execve()
mailmap: add Changbin Du
mm/debug.c: add a cast to u64 for atomic64_read()
...
request_standard_resources(), the latter being limited to the low 4G
memory range on arm64.
-----BEGIN PGP SIGNATURE-----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=c25Z
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Use memblock_alloc() instead of memblock_alloc_low() in
request_standard_resources(), the latter being limited to the low 4G
memory range on arm64"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: replace memblock_alloc_low with memblock_alloc
Including:
- Fix a bug in the AMD IOMMU driver not handling exclusion ranges
correctly. In fact the driver did not reserve these ranges for
IOVA allocations, so that dma-handles could be allocated in an
exclusion range, leading to data corruption. Exclusion ranges
have not been used by any firmware up to now, so this issue
remained undiscovered for quite some time.
- Fix wrong warning messages that the IOMMU core code prints
when it tries to allocate the default domain for an iommu
group and the driver does not support any of the default
domain types (like Intel VT-d).
-----BEGIN PGP SIGNATURE-----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=HY4V
-----END PGP SIGNATURE-----
Merge tag 'iommu-fixes-v5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a bug in the AMD IOMMU driver not handling exclusion ranges
correctly. In fact the driver did not reserve these ranges for IOVA
allocations, so that dma-handles could be allocated in an exclusion
range, leading to data corruption. Exclusion ranges have not been
used by any firmware up to now, so this issue remained undiscovered
for quite some time.
- Fix wrong warning messages that the IOMMU core code prints when it
tries to allocate the default domain for an iommu group and the
driver does not support any of the default domain types (like Intel
VT-d).
* tag 'iommu-fixes-v5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Reserve exclusion range in iova-domain
iommu: Don't print warning when IOMMU driver only supports unmanaged domains
Here is a single driver core patch for 5.1-rc3.
After 5.1-rc1, all of the users of BUS_ATTR() are finally removed, so we
can now drop this macro from include/linux/device.h so that no more new
users will be created.
This patch has been in linux-next for a while, with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXJ5skg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylp3wCfT73IbPPjeSxWZjyPLOBiz31YfTEAnjajShZl
gQk7H0O5Ovv5ntsyk0bM
=CRS4
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core patch for 5.1-rc3.
After 5.1-rc1, all of the users of BUS_ATTR() are finally removed, so
we can now drop this macro from include/linux/device.h so that no more
new users will be created.
This patch has been in linux-next for a while, with no reported
issues"
* tag 'driver-core-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: remove BUS_ATTR()
