Commit Graph

768456 Commits

Author SHA1 Message Date
Jordan Crouse
e00e473d98 drm/msm/gpu: Capture the state of the GPU
Add the infrastructure to capture the current state of the GPU and
store it in memory so that it can be dumped later.

For now grab the same basic ringbuffer information and registers
that are provided by the debugfs 'gpu' node but obviously this should
be extended to capture a much larger set of GPU information.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-30 08:49:45 -04:00
Jordan Crouse
5dc634bdbf drm: Add puts callback for the coredump printer
Add a puts function for the coredump printer to bypass printf()
for constant strings for a speed boost. Reorganize the
coredump printf callback to share as much code as possible.

v2: Try to reuse code between print and puts as suggested by
    Chris Wilson

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-30 08:49:41 -04:00
Jordan Crouse
4538d73245 drm: Add a -puts() function for the seq_file printer
Add a puts() function to use seq_puts() to help speed up
up print time for constant strings.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-30 08:49:38 -04:00
Jordan Crouse
63f4cc015b drm: Add drm_puts() to complement drm_printf()
Add drm_puts() for a much faster path to print constant strings
into a drm_printer object with memcpy and friends. This can
have seconds off of really large outputs such as GPU dumps.

If the drm_printer object supports a custom puts function then
use that otherwise fall back to the slower legacy printf call.

v2: Add documentation for drm_puts() per Daniel Vetter

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
[robclark fix minor htmldocs warning]
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-30 08:49:35 -04:00
Jordan Crouse
cfc57a18a3 drm: drm_printer: Add printer for devcoredump
Add a drm printer suitable for use with the read callback for
devcoredump or other suitable buffer based output format that
isn't otherwise covered by seq_file.

v2: Add improved documentation per Daniel Vetter

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-30 08:49:31 -04:00
Jordan Crouse
489cae632f include: Move ascii85 functions from i915 to linux/ascii85.h
The i915 DRM driver very cleverly used ascii85 encoding for their
GPU state file. Move the encode functions to a general header file to
support other drivers that might be interested in the same
functionality.

v4: Make the return value const char * as suggested by Chris Wilson
v3: Fix error_puts -> err_puts pointed out by the 01.org bot
v2: Update API to be cleaner for the caller as suggested by Chris Wilson

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-30 08:49:02 -04:00
Rajesh Yadav
2f2eb723b5 drm/msm: rework vblank event handling in dpu_crtc
The vblank on/off calls were missing in dpu_crtc
leading to "driver forgot to call drm_crtc_vblank_off()"
warning while entering suspend state.
Also handle the state update completion event for
a crtc being disabled in current atomic commit.

This patch depends on https://www.spinics.net/lists/dri-devel/msg182402.html

Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:45:05 -04:00
Jeykumar Sankaran
25fdd5933e drm/msm: Add SDM845 DPU support
SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

       MDSS
      +---------------------------------+
      | +-----------------------------+ |
      | | DPU                         | |
      | |  +--------+  +--------+     | |
      | |  |  SSPP  |  |  SSPP  |     | |
      | |  +----+---+  +----+---+     | |
      | |       |           |         | |
      | |  +----v-----------v---+     | |
      | |  |  Layer Mixer (LM)  |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |    PingPong (PP)   |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |  INTERFACE (VIDEO) |     | |
      | |  +---+----------------+     | |
      | +------|----------------------+ |
      |        |                        |
      | +------|---------------------+  |
      | |      | DISPLAY PERIPHERALS |  |
      | |  +---v-+      +-----+      |  |
      | |  | DSI |      |  DP |      |  |
      | |  +-----+      +-----+      |  |
      | +----------------------------+  |
      +---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
 Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
 capable of performing format conversion, scaling and quality improvement
 for source surfaces.

* Layer Mixer (LM):
 Blend source surfaces together (in requested zorder)

* PingPong (PP):
 This block controls frame done interrupt output, EOL and EOF generation,
 overflow/underflow control.

* Display interface (INTF):
 Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
  - Dual pipe: Output from two LMs combined to single display.
  - Split display: Output from two LMs connected to two separate
                   interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:45:04 -04:00
Jeykumar Sankaran
036bfeb33b drm/msm: Add pm_suspend/resume callbacks to msm_kms
Used by the dpu driver for custom suspend/resume.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this out of the megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Jeykumar Sankaran
2b7ac1a898 drm/msm: Add .commit() callback to msm_kms functions
Called right before wait_for_commit_done() to perform kickoff for
active crtcs.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this out of the megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Jeykumar Sankaran
7305a0ceec drm/msm: #define MAX_<OBJECT> in msm_drv.h
dpu uses these elsewhere in the driver (in addition to increasing
MAX_PLANES, that'll come later), so pull them out into #define.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul pulled this out of the dpu megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Jeykumar Sankaran
77050c3feb drm/msm: Use labels for unwinding in the error path
This simplifies cleanup, to make sure nothing drops out in case of
error.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split out of dpu megapatch and renamed labels]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Jeykumar Sankaran
aaded2e3a1 drm/msm: #define MDP version numbers
Useful for incoming DPU support

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this from the dpu megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Sean Paul
74312fc734 drm/msm: Clean up dangling atomic_wq
I missed this during the atomic conversion

Changes in v3:
- None

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Abhinav Kumar
2d0b10fc51 drm/msm: higher values of pclk can exceed 32 bits when multiplied by a factor
Make the pclk_rate u64 to accommodate higher pixel clock
rates.

Changes in v3:
- Converted pclk_rate to u32 (Archit)
- Rebase on dsi cleanup set in msm-next

Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Jeykumar Sankaran
bb676df12b drm/msm: enable zpos normalization
Enable drm core zpos normalization for planes.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Rajesh Yadav
bc3220be22 drm/msm/mdp5: subclass msm_mdss for mdp5
SoCs having mdp5 or dpu have identical tree like
device hierarchy where MDSS top level wrapper manages
common power resources for all child devices.

Subclass msm_mdss so that msm_mdss includes common defines
and mdp5/dpu mdss derivations to include any extensions.

Add mdss helper interface (msm_mdss_funcs) to msm_mdss
base for mdp5/dpu mdss specific implementation calls.

This change subclasses msm_mdss for mdp5, dpu specific
changes will be done separately.

Changes in v3:
- Added Archit's R-b

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
[seanpaul rebased on msm-next and resolved conflicts]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Sean Paul
a5c6b59904 drm/msm: Move wait_for_vblanks into mdp complete_commit() hooks
DPU doesn't use this, so push it into the mdp drivers.

Changes in v3:
- None

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Abhinav Kumar
425a2d24d5 drm/msm/dsi: set encoder mode for DRM bridge explicitly
Currently, DRM bridge for DPU relies on the default video
mode setting to set the encoder mode.

Add an explicit call to set the encoder mode for bridges.

Changes in v3:
- None

Reviewed-by: Archit Taneja <architt@codeauorora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:14 -04:00
Rajesh Yadav
7a296796fd drm/msm/dsi: initialize postdiv_lock before use for 10nm pll
postdiv_lock spinlock was used before initialization
for 10nm pll. It causes following spin_bug:
	"BUG: spinlock bad magic on CPU#0".
Initialize spinlock before its usage.

Changes in v3:
- Added Archit's R-b

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:14 -04:00
Chandan Uddaraju
8b03ad30e3 drm/msm/dsi: Use one connector for dual DSI mode
Current DSI driver uses two connectors for dual DSI case even
though we only have one panel. Fix this by implementing one
connector/bridge for dual DSI use case. Use master DSI
controllers to register one connector/bridge.

Changes in v3:
- None

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
[seanpaul removed unused local var causing a build warning]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:14 -04:00
Chandan Uddaraju
ed9976a09b drm/msm/dsi: adjust dsi timing for dual dsi mode
For dual dsi mode, the horizontal timing needs
to be divided by half since both the dsi controllers
will be driving this panel. Adjust the pixel clock and
DSI timing accordingly.

Changes in v3:
- Added Archit's R-b
- Rebase on dsi cleanup set in msm-next

Cc: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:14 -04:00
Jeykumar Sankaran
2a8536f6e8 drm: add msm compressed format modifiers
Qualcomm Snapdragon chipsets uses compressed format
to optimize BW across multiple IP's. This change adds
needed modifier support in drm for a simple 4x4 tile
based compressed variants of base formats.

Changes in v3:
- Removed duplicate entry for DRM_FORMAT_MOD_QCOM_COMPRESSED (Rob Clark)
Changes in v4:
- Remove all modifiers aside from COMPRESSED, this includes tiled and
  10-bit

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:39:21 -04:00
vkorjani
ea107a183b drm: Add support for pps and compression mode command packet
After enabling DSC we need to send compression mode command packet
and pps data packet, for which 2 new data types are added
07h  Compression Mode Data Type Write , short write, 2 parameters
0Ah  PPS Long Write (word count determines number of bytes)
This patch adds support to send these packets.

Cc: David Airlie <airlied@linux.ie>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org

Changes in v3:
- None

Signed-off-by: vkorjani <vikas.korjani@intel.com>
[seanpaul removed pps_write_buffer fn, added types to packet_format helpers]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25 07:51:05 -04:00
Carsten Behling
23f9455157 drm/msm/mdp5: negative x/y in cursor move
modesetting X11 driver may provide negative x/y cordinates in
mdp5_crtc_cursor_move call when rotation is enabled.

Cursor buffer can overlap down to its negative width/height.

ROI has to be recalculated for negative x/y indicating using the
lower/right corner of the cursor buffer and hotspot must be set
in MDP5_LM_CURSOR_XY_SRC_Y MDP5_LM_CURSOR_XY_SRC_X.

Signed-off-by: Carsten Behling <carsten.behling@gmail.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25 07:51:05 -04:00
Sibi Sankar
8f7ca54090 drm/msm/dsi: replace version checks with helper functions
Replace version checks with the helper functions bound to
cfg_handler for DSI v2, DSI 6G 1.x and DSI 6G v2.0+ controllers

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25 07:51:05 -04:00
Sibi Sankar
c4d8cfe516 drm/msm/dsi: add implementation for helper functions
Add dsi host helper function implementation for DSI v2
DSI 6G 1.x and DSI 6G v2.0+ controllers

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25 07:51:04 -04:00
Sibi Sankar
e18177cc57 drm/msm/dsi: add dsi host helper functions support
Add dsi host helper functions support for DSI v2 and DSI 6G 1.x
controllers that are under version checks

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25 07:51:04 -04:00
Rob Clark
6e8bed6a3e drm/msm/mdp5: fix missing CTL flush
f9cb8d8d83 fixed various race conditions with CTL flush, in particular
flushing and sending the START signal before encoder state was updated.
But it did this a little too well in some cases that don't trigger
encoder->enable(), and CTL[n].FLUSH would never be set.  When page flips
happen it would paper over the bug, since the first plag flip would
flush out the state to the hardware.

The issue could be reproduced with, for example, modetest (without the
'-v' argument).

Fixes: f9cb8d8d83 drm/msm/mdp5: rework CTL START signal handling
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
2018-07-25 07:51:04 -04:00
Jordan Crouse
64709686db drm/msm/gpu: Increase the pm runtime autosuspend for 5xx
Experimentation shows that resuming power quickly after suspending
ends up forcing a system hang for unknown reasons on 5xx targets.
To avoid cycling the power too much (especially during init)
turn up the autosuspend time for a5xx to 250ms and use
pm_runtime_put_autosuspend() when applicable.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25 07:51:04 -04:00
Daniel Mack
6666e1a66f drm/msm/adreno: Add power management functions for system sleep
When a msm8016 based system is woken up from suspend, the firmware in
the adreno device hangs.

[   83.903416] qcom-iommu-ctx 1f09000.iommu-ctx: Unhandled context fault: fsr=0x202, iova=0x0000000000000000, fsynr=0x2, cb=1
[   85.853633] msm 1a00000.mdss: A306: hangcheck detected gpu lockup rb 0!
[   85.853661] msm 1a00000.mdss: A306:     completed fence: 370
[   85.859073] msm 1a00000.mdss: A306:     submitted fence: 372
[   85.865113] msm 1a00000.mdss: A306: hangcheck recover!

Fix this by adding pm_runtime_force_suspend/pm_runtime_force_resume
as sleep ops.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25 07:51:04 -04:00
Daniel Mack
ec446d0936 drm/msm: call drm_atomic_helper_suspend() and drm_atomic_helper_resume()
To make suspend and resume work on msm8916 platforms, call into the generic
helpers and preserve the state across suspends.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-25 07:51:04 -04:00
Dave Airlie
500775074f Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next
More features for 4.19:
- Map processes to vmids for debugging GPUVM faults
- Raven gfxoff fixes
- Initial gfxoff support for vega12
- Use defines for interrupt sources rather than magic numbers
- DC aux fixes
- Finish DC logging TODO
- Add more DC debugfs interfaces for conformance testing
- Add CRC support for DCN
- Scheduler rework in preparation for load balancing
- Unify common smu9 code
- Clean up UVD instancing support
- ttm cleanups
- Misc fixes and cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194001.3488-1-alexander.deucher@amd.com
2018-07-20 14:54:31 +10:00
Dave Airlie
ef8e0ff97a On GEM side:
- GuC related fixes (Chris, Michal)
 - GTT read-only pages support (Jon, Chris)
 - More selftests fixes (Chris)
 - More GPU reset improvements (Chris)
 - Flush caches after GGTT writes (Chris)
 - Handle recursive shrinker for vma->last_active allocation (Chris)
 - Other execlists fixes (Chris)
 
 On Display side:
 
 - GLK HDMI fix (Clint)
 - Rework and cleanup around HPD pin (Ville)
 - Preparation work for Display Stream Compression support coming on ICL (Anusha)
 - Nuke LVDS lid notification (Ville)
 - Assume eDP is always connected (Ville)
 - Kill intel panel detection (Ville)
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJbULORAAoJEPpiX2QO6xPKevQH/3qlk9S2G3Vg4iBR9FDzYvLr
 KDPKnve7V11Fr7rGVRSGEK+ISiuABi79uzstNqX1VqbI/Mw/LNxmHvJ5LsrXPewp
 HVbT6GT2GlAy1tV2yDJHOGO6E4qk+5/rz1H+zIKMne9sU/PtSnxVzu0AxSVt0Jd2
 2aQASbHE2yAOA+7Pvvn3GMGr9n0cf6rHE2P7hFbMbjEtobnM3Lq3NL/3e8cz8vxF
 4AcUhZvwp1KlYNTKz5bdIuQpHonsYEcKu0DLLAas1NalH7cJryW6erMrtWZiPlon
 qdQyiyiqqGJsJA2dXIJCS9QmkX/JCxt7ojJQCz72a4nCB6yAd3hvLJ+/W2eU3iM=
 =QWE6
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-next-2018-07-19' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

On GEM side:

- GuC related fixes (Chris, Michal)
- GTT read-only pages support (Jon, Chris)
- More selftests fixes (Chris)
- More GPU reset improvements (Chris)
- Flush caches after GGTT writes (Chris)
- Handle recursive shrinker for vma->last_active allocation (Chris)
- Other execlists fixes (Chris)

On Display side:

- GLK HDMI fix (Clint)
- Rework and cleanup around HPD pin (Ville)
- Preparation work for Display Stream Compression support coming on ICL (Anusha)
- Nuke LVDS lid notification (Ville)
- Assume eDP is always connected (Ville)
- Kill intel panel detection (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>

# gpg: Signature made Fri 20 Jul 2018 01:51:45 AM AEST
# gpg:                using RSA key FA625F640EEB13CA
# gpg: Good signature from "Rodrigo Vivi <rodrigo.vivi@intel.com>"
# gpg:                 aka "Rodrigo Vivi <rodrigo.vivi@gmail.com>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6D20 7068 EEDD 6509 1C2C  E2A3 FA62 5F64 0EEB 13CA

# Conflicts:
#	drivers/gpu/drm/i915/intel_lrc.c
Link: https://patchwork.freedesktop.org/patch/msgid/20180719171257.GA12199@intel.com
2018-07-20 12:29:24 +10:00
Dave Airlie
294f96ae8a drm-misc-next for 4.19:
Core Changes:
 - add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
 - more doc updates (Daniel Vetter)
 - fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
 - dma-buf: correctly place BUG_ON (Michel Dänzer)
 
 Driver Changes:
 - more vkms support(Rodrigo Siqueira)
 - many fixes and small improments to all drivers
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJbT52JAAoJEEN0HIUfOBk06UsQAIy5YwUQ9l+8GdS5bKU299KW
 ZMMi0pTgB/bg0uuqGqN1zf23kpyRTNBGu2UMZgHWTcM4gjTP9qxb5GPFyOhr5he4
 pkp0p13fcn85Mkpt6ZQQD4ErMnhJSodzPRRT+ypnM+HzcWWehQOnSbLWCTOpaCeg
 5SsSFT7RfpDcICXzZZKAHFwHAp1y1y6V027RWu0/amUTwoZPn+ktU/s0thGIdqFk
 EGb/dP4K0PAHE4ZnhZOHPFlYbVQWp0J8X7+NmkXvPgwVPahLvKbNMBfG9M3mGcku
 cMwW8phngd0ih9gd1rblG3J8pdISArg6EgqAwwUV6p8tHUBQff5mL/RTh5zrUs6D
 seLqzRM4V74WDp2meMSYogISo2b+39RiL1IhayTytdW/oaterXloSChAwKUz4pi/
 Nj3/Kn59m9DH9NoAh3DYvDg+e06U9csR6TUJZ0B6BlXIwju9/QLybsDbUdmjtSW+
 yqttEs8m4k2gB2ZRo9y2RVi/XCNv0t+GYa2HQcTGrYVZpIxKioT6WdnlobQZ6L2E
 9CClacN6v2e27cQUbZEFuU7phUkM/nw18dROFrIwJ0OxsA5nElO1DTiOy+KDwzAU
 E+l4DqZZknyxEfTxUq79+9J2HmhqA7ikQbgNJMQyQ25iRFrkvYsI7XfF4ix5z+a5
 I0/CkPP3UsTibnVhM7wn
 =HyBh
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2018-07-18' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 4.19:

Core Changes:
- add support for DisplayPort CEC-Tunneling-over-AUX (Hans Verkuil)
- more doc updates (Daniel Vetter)
- fourcc: Add is_yuv field to drm_format_info (Ayan Kumar Halder)
- dma-buf: correctly place BUG_ON (Michel Dänzer)

Driver Changes:
- more vkms support(Rodrigo Siqueira)
- many fixes and small improments to all drivers

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180718200826.GA20165@juma
2018-07-20 10:46:49 +10:00
Dave Airlie
090cbdd073 Merge branch 'linux-4.19' of git://github.com/skeggsb/linux into drm-next
misc fixes and cleanups for next.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv55CfRonQ0bo2XiitkCiWTjKwhsP=+ZFhoa-BaJ72Ryew@mail.gmail.com
2018-07-20 10:34:33 +10:00
Christian König
5c675bf2c6 drm/amdgpu: clean up UVD instance handling v2
The whole handle, filp and entity handling is superfluous here.

We should have reviewed that more thoughtfully. It looks like somebody
just made the code instance aware without knowing the background.

v2: fix one more missed case in amdgpu_uvd_suspend

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming  Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-19 13:56:44 -05:00
Christian König
58c24b7c89 drm/amdgpu: remove superflous UVD encode entity
Not sure what that was every used for, but now it is completely unused.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Chunming  Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-19 13:56:44 -05:00
Michel Dänzer
4841203102 drm/amdgpu/display: Replace CONFIG_DRM_AMD_DC_DCN1_0 with CONFIG_X86
Allowing CONFIG_DRM_AMD_DC_DCN1_0 to be disabled on X86 was an
opportunity for display with Raven Ridge accidentally not working.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-19 13:56:43 -05:00
Evan Quan
1ce0688f3f drm/amd/powerplay: fixed uninitialized value
The 'result' is not initialized correctly. It causes the API
return an error code even on success.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
2018-07-19 13:56:43 -05:00
Alex Deucher
c64fb6dade drm/amdgpu/powerplay: use irq source defines for smu7 sources
Use the newly added irq source defines rather than magic numbers
for smu7 thermal interrupts.

Rewiewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Rex Zhu <rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2018-07-19 13:53:55 -05:00
Rodrigo Vivi
ef821e3f14 drm/i915: Update DRIVER_DATE to 20180719
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-19 08:47:59 -07:00
Ville Syrjälä
d81be4f379 drm/i915: Remove intel_panel_detect()
With neither LVDS or eDP no longer using intel_panel_detect() we can
kill it, and the accompanying modparam.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-3-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-19 18:39:31 +03:00
Ville Syrjälä
b93b41afce drm/i915: Assume eDP is always connected
We never registered any kind of lid notifier for eDP, so looking at the
lid status is pretty much bonkers. Let's just consider eDP always
connected instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-2-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-19 18:39:31 +03:00
Ville Syrjälä
05c72e77cc drm/i915: Nuke the LVDS lid notifier
We broke the LVDS notifier resume thing in (presumably) commit
e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.") as
we no longer duplicate the current state in the LVDS notifier and
thus we never resume it properly either.

Instead of trying to fix it again let's just kill off the lid
notifier entirely. None of the machines tested thus far have
apparently needed it. Originally the lid notifier was added to
work around cases where the VBIOS was clobbering some of the
hardware state behind the driver's back, mostly on Thinkpads.
We now have a few report of Thinkpads working just fine without
the notifier. So maybe it was misdiagnosed originally, or
something else has changed (ACPI video stuff perhaps?).

If we do end up finding a machine where the VBIOS is still causing
problems I would suggest that we first try setting various bits in
the VBIOS scratch registers. There are several to choose from that
may instruct the VBIOS to steer clear.

With the notifier gone we'll also stop looking at the panel status
in ->detect().

v2: Nuke enum modeset_restore (Rodrigo)

Cc: stable@vger.kernel.org
Cc: Wolfgang Draxinger <wdraxinger.maillist@draxit.de>
Cc: Vito Caputo <vcaputo@pengaru.com>
Cc: kitsunyan <kitsunyan@airmail.cc>
Cc: Joonas Saarinen <jza@saunalahti.fi>
Tested-by: Vito Caputo <vcaputo@pengaru.com> # Thinkapd X61s
Tested-by: kitsunyan <kitsunyan@airmail.cc> # ThinkPad X200
Tested-by: Joonas Saarinen <jza@saunalahti.fi> # Fujitsu Siemens U9210
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105902
References: https://lists.freedesktop.org/archives/intel-gfx/2018-June/169315.html
References: https://bugs.freedesktop.org/show_bug.cgi?id=21230
Fixes: e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717174216.22252-1-ville.syrjala@linux.intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-07-19 18:39:31 +03:00
Chris Wilson
d78d3343dc drm/i915/execlists: Move the assertion we have the rpm wakeref down
There's a race between idling the engine and finishing off the last
tasklet (as we may kick the tasklets after declaring an individual
engine idle). However, since we do not need to access the device until
we try to submit to the ELSP register (processing the CSB just requires
normal CPU access to the HWSP, and when idle we should not need to
submit!) we can defer the assertion unto that point. The assertion is
still useful as it does verify that we do hold the longterm GT wakeref
taken from request allocation until request completion.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107274
Fixes: 9512f985c3 ("drm/i915/execlists: Direct submission of new requests (avoid tasklet/ksoftirqd)")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719075029.28643-1-chris@chris-wilson.co.uk
2018-07-19 13:23:43 +01:00
Chris Wilson
46b1063f91 drm/i915: Handle recursive shrinker for vma->last_active allocation
If we call into the shrinker for direct relcaim inside kmalloc, it will
retire the requests. If we retire the vma->last_active while processing a
new i915_vma_move_to_active() we can upset the delicate bookkeeping
required for the cache. After the possible invocation of the shrinker, we
need to double check the vma->last_active is still valid.

Fixes: 8b293eb53a ("drm/i915: Track the last-active inside the i915_vma")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105600#c39
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719072206.16015-1-chris@chris-wilson.co.uk
2018-07-19 12:27:46 +01:00
Chris Wilson
209b7955e5 drm/i915/guc: Keep guc submission permanently engaged
We make a decision at module load whether to use the GuC backend or not,
but lose that setup across set-wedge. Currently, the guc doesn't
override the engine->set_default_submission hook letting execlists sneak
back in temporarily on unwedging leading to an unbalanced park/unpark.

v2: Remove comment about switching back temporarily to execlists on
guc_submission_disable(). We currently only call disable on shutdown,
and plan to also call disable before suspend and reset, in which case we
will either restore guc submission or mark the driver as wedged, making
the reset back to execlists pointless.
v3: Move reset.prepare across

Fixes: 63572937ce ("drm/i915/execlists: Flush pending preemption events during reset")
Testcase: igt/drv_module_reload/basic-reload-inject
Testcase: igt/gem_eio
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180717202932.1423-1-chris@chris-wilson.co.uk
2018-07-19 10:13:26 +01:00
Ben Skeggs
d00ddd9da7 drm/nouveau/kms/nv50-: allocate push buffers in vidmem on pascal
Workaround for issues seen on systems with large amounts of RAM, caused
by display not supporting the same physical address limits as the other
parts of the GPU.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2018-07-19 14:38:09 +10:00
Anusha Srivatsa
c7d2959f03 i915/dp/dsc: Add Rate Control Range Parameter Registers
RC model has these parameters that correspond with each of
15 ranges of RC buffer threshold value in the RC model.
The three elements are range_min_qp, range_max_qp and
range_bpg_offset.

Add the Rate Control range values for eDP/MIPI and DP case.
The actual values are calculated usung a helper function.
This patch adds the shifts to registers where the value will
be written during atomic commit.

v2:
- Use _MMIO_PIPE() instead of _MMIO(_PICK()) (Manasi)
- Combine shifts (Manasi)

Cc: Jose Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531861861-10950-4-git-send-email-anusha.srivatsa@intel.com
2018-07-18 17:47:53 -07:00