Now that we don't need the intermediate syscon to represent the TCSR
mutexes, update the dts to describe the TCSR mutex directly under /soc.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20200622075956.171058-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The wlan firmware memory is statically mapped in
the Trusted Firmware, hence the wlan driver does
not need to map/unmap this region dynamically.
Hence add the property to indicate the wlan driver
to not map/unamp the firmware memory region
dynamically.
Also add the chain1 voltage supply for wlan.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
Link: https://lore.kernel.org/r/1594615586-17055-1-git-send-email-pillair@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
The WiFi supplies that were added recently can't have done anything
useful because they were missing the "-supply" suffix. Booting
without the "-supply" suffix would give these messages:
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-0.8-cx-mx not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.8-xo not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-1.3-rfa not found, using dummy regulator
ath10k_snoc 18800000.wifi: 18800000.wifi supply vdd-3.3-ch0 not found, using dummy regulator
Let's add the "-supply" suffix.
Tested-by: Rakesh Pillai <pillair@codeaurora.org>
Reviewed-by: Rakesh Pillai <pillair@codeaurora.org>
Fixes: 1e7594a38f ("arm64: dts: qcom: sc7180: Add WCN3990 WLAN module device node")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200625131658.REPOST.1.I32960cd32bb84d6db4127c906d7e371fa29caebf@changeid
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the vendor-specific registers and clock for Qualcomm ICE (Inline
Crypto Engine) to the device tree node for the UFS host controller on
sdm845, so that the ufs-qcom driver will be able to use inline crypto.
Use a separate register range rather than extending the main UFS range
because there's a gap between the two, and the ICE registers are
vendor-specific. (Actually, the hardware claims that the ICE range also
includes the array of standard crypto configuration registers; however,
on this SoC the Linux kernel isn't permitted to access them directly.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200710072013.177481-4-ebiggers@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the power domain supporting performance state and the corresponding
OPP tables for the sdhc device on sc7180.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1593506712-24557-5-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the power domain supporting performance state and the corresponding
OPP tables for the sdhc device on sdm845.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1593506712-24557-4-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
qup has a requirement to vote on the performance state of the CX domain
in sc7180 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1593506712-24557-3-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
qup has a requirement to vote on the performance state of the CX domain
in sdm845 devices. Add OPP tables for these and also add power-domains
property for all qup instances for uart and spi.
i2c does not support scaling and uses a fixed clock.
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1593506712-24557-2-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the power domain supporting performance state and the corresponding
OPP tables for the qspi device on sc7180
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1593769293-6354-4-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the power domain supporting performance state and the corresponding
OPP tables for the qspi device on sdm845
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1593769293-6354-3-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Having a non-MSA (Modem Self-Authentication) SID bypassed breaks modem
sandboxing i.e if a transaction were to originate from it, the hardware
memory protections units (XPUs) would fail to flag them (any transaction
originating from modem are historically termed as an MSA transaction).
Drop the unused non-MSA modem SID on SC7180 SoCs and cheza so that SMMU
continues to block them.
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Fixes: bec71ba243 ("arm64: dts: qcom: sc7180: Update Q6V5 MSS node")
Fixes: 68aee4af5f ("arm64: dts: qcom: sdm845-cheza: Add iommus property")
Cc: stable@vger.kernel.org
Reported-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200630081938.8131-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add a simple-mfd representing IMEM on SDM845 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-6-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add a simple-mfd representing IMEM on QCS404 and define the PIL
relocation info region, so that post mortem tools will be able to locate
the loaded remoteprocs.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20200622191942.255460-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add OPP tables required to scale DDR/L3 per freq-domain on SC7180 SoCs.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20200626190808.8716-1-sibis@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add properties required for the bootloader to select
the correct bootloader blob. They have been removed from
the SoC device tree as they should be set on a per-device
basis.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623224813.297077-11-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add PSCI node to enable multi-processor startup.
Note that not every 8994 device firmware supports PSCI,
and even if, then it can only start the cores and not
shut them down.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623224813.297077-10-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add support for I2C and SPI buses to enable peripherals
such as touchscreens or sensors. Also add DMA nodes,
configuration and BLSP2 UART2 interface.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623224813.297077-8-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Following changes have been made:
- remove name, compatible and msm-id
- wrap clocks in clocks{}
- order nodes by name and by address
- clock_gcc -> gcc
- msmgpio -> tlmm
- qcom,smem -> smem
- remove unit-address from smem
- retire msm8994-pins.dtsi
- add some of the missing pins
- make comments C-style
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200623224813.297077-2-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add remoteproc nodes for the audio, compute and sensor cores, define
glink for each one and enable them on the MTP with appropriate firmware
defined.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-6-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
SMP2P is used for interrupting and being interrupted about remoteproc
state changes related to the audio, compute and sensor subsystems.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200622222747.717306-5-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
PM8150 ldo11 on the MTP is wired to VDD_SSC_CX and controlled in levels,
rather than as a regulator. As such it's available from the rpmhpd as
the SM8250_LCX power domain.
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Fixes: ec13d5c23a ("arm64: dts: qcom: sm8250-mtp: Add pm8150, pm8150l and pm8009")
Link: https://lore.kernel.org/r/20200622222747.717306-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add device tree support for the Sony Xperia 10 and 10
Plus smartphones. They are all based on the Sony Ganges
platform (sdm630/636) and share a lot of common code.
The differences are really minor, so a Ganges-common DTSI
has been created to reduce clutter.
10 - Kirin
10 Plus - Mermaid
This platform is based on SoMC Nile, but there are some
major differences when it comes to pin configuration and
panel setup (among others).
The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Martin Botka <martin.botka1@gmail.com>
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Tested-by: Martin Botka <martin.botka1@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-7-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add device tree support for the Sony Xperia XA2, XA2 Plus and
XA2 Ultra smartphones. They are all based on the Sony Nile
platform (sdm630) and share a lot of common code. The
differences are really minor, so a Nile-common DTSI
has been created to reduce clutter.
XA2 - Pioneer
XA2 Plus - Voyager
XA2 Ultra - Discovery
The boards currently support:
* Screen console
* SDHCI
* I2C
* pstore log dump
* GPIO keys
* PSCI idle states
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Tested-by: Łukasz Patron <priv.luk@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-6-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add devicetree files for SDM630 SoC and its pin configuration.
This commit adds basic nodes like cpu, psci and other required
configuration for booting up from eMMC to the serial console.
Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
Link: https://lore.kernel.org/r/20200622192558.152828-5-konradybcio@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Much like SDM845 each serial engine has 4 pins attached. Add all
possible I2C and SPI nodes for all 20 serial engines.
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200606131300.3874987-1-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the TLMM pinctrl node for SM8250 and reserve pins 28-31 and 40-43 on
the MTP as firmware does not allow Linux to touch these pins.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200430181716.3797842-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add temperature alarm and thermal zone configuration to all three
pm8150 instances. Configuration is largely based on the msm-4.19 tree.
These alarms use main adc of the pmic. Separate temperature adc is not
supported yet.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20200621192824.2069145-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
sm8150 has 27 thermal sensors split across two tsens controllers. Add
the thermal zones to expose them and wireup the cpus to throttle their
frequencies on crossing passive temperature thresholds.
Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/1cdbebe6f7f69ccd8468a4138b56e8a200289d95.1591684754.git.amit.kucheria@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add nodes for the network-on-chip interconnect buses present on
MSM8916-based platforms.
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Link: https://lore.kernel.org/r/20200617134515.25229-1-georgi.djakov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
apq8016-sbc.dtsi uses spaces on some lines instead of tabs.
Make this consistent by converting them to tabs.
Also remove some redundant comments from the DAI link definitions
- this is already visible from the comment block before the "sound"
node or the device node entries itself.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-4-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
msm8916-pins.dtsi specifies "bias-pull-none" for most of the audio
pin configurations. This was likely copied from the qcom kernel fork
where the same property was used for these audio pins.
However, "bias-pull-none" actually does not exist at all - not in
mainline and not in downstream. I can only guess that the original
intention was to configure "no pull", i.e. bias-disable.
Change it to that instead.
Fixes: 143bb9ad85 ("arm64: dts: qcom: add audio pinctrls")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
As of commit 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD lines
configurable"), lpass now supports children nodes to configure the
MI2S SD lines to use for one of the I2S ports. For example:
lpass@7708000 {
dai@3 {
reg = <MI2S_QUATERNARY>;
qcom,playback-sd-lines = <1>;
};
};
The "reg" property refers to the DAI number in this case,
so we need to set #address-cells and #size-cells appropriately
to avoid DTC warnings.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200605185916.318494-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
By specifying the modem firmware files, we can boot the modem subsystem
which also gives us wifi.
Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>
Link: https://lore.kernel.org/r/20200528185341.4891-1-jeffrey.l.hugo@gmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
