The standard kernel integer types are [us]{8,16,32}. Use them instead of
the u?int{8,16,32}_t types.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Driver Changes:
- Lift alpha_support protection from Cannonlake (Rodrigo)
* Meaning the driver should mostly work for the hardware we had
at our disposal when testing
* Used to be preliminary_hw_support
- Add missing Cannonlake PCI device ID of 0x5A4C (Rodrigo)
- Cannonlake port register fix (Mahesh)
- Fix Dell Venue 8 Pro black screen after modeset (Hans)
- Fix for always returning zero out-fence from execbuf (Daniele)
- Fix HDMI audio when no no relevant video output is active (Jani)
- Fix memleak of VBT data on driver_unload (Hans)
- Fix for KASAN found locking issue (Maarten)
- RCU barrier consolidation to improve igt/gem_sync/idle (Chris)
- Optimizations to IRQ handlers (Chris)
- vblank tracking improvements (64-bit resolution, PM) (Dhinakaran)
- Pipe select bit corrections (Ville)
- Reduce runtime computed device_info fields (Chris)
- Tune down some WARN_ONs to GEM_BUG_ON now that CI has good coverage (Chris)
- A bunch of kerneldoc warning fixes (Chris)
* tag 'drm-intel-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-intel: (113 commits)
drm/i915: Update DRIVER_DATE to 20180221
drm/i915/fbc: Use PLANE_HAS_FENCE to determine if the plane is fenced
drm/i915/fbdev: Use the PLANE_HAS_FENCE flags from the time of pinning
drm/i915: Move the policy for placement of the GGTT vma into the caller
drm/i915: Also check view->type for a normal GGTT view
drm/i915: Drop WaDoubleCursorLP3Latency:ivb
drm/i915: Set the primary plane pipe select bits on gen4
drm/i915: Don't set cursor pipe select bits on g4x+
drm/i915: Assert that we don't overflow frontbuffer tracking bits
drm/i915: Track number of pending freed objects
drm/i915/: Initialise trans_min for skl_compute_transition_wm()
drm/i915: Clear the in-use marker on execbuf failure
drm/i915: Prune gen8_gt_irq_handler
drm/i915: Track GT interrupt handling using the master iir
drm/i915: Remove WARN_ONCE for failing to pm_runtime_if_in_use
drm: intel_dpio_phy: fix kernel-doc comments at nested struct
drm/i915: Release connector iterator on a digital port conflict.
drm/i915/execlists: Remove too early assert
drm/i915: Assert that we always complete a submission to guc/execlists
drm: move read_domains and write_domain into i915
...
Rename the bundled tilcdc_panel driver from just "panel" to
"tilcdc-panel" to avoid noisy error messages from the driver trying to
probe all device nodes named "panel".
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add support for drm panels to tilcdc. Adding the support on top of the
existing bridge support needs only couple of lines of code when using
using the drm panel bridge helpers.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Add a jump target so that a bit of exception handling can be better reused
at the end of this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Omit an extra message for a memory allocation failure in these functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
- Expose thermal thresholds through hwmon properly
- Rework HDP flushing for rings and CPU
- Improved dual-link DVI handling in DC
- Lots of code clean up
- Additional DC clean up
- Allow scanout from system memory on CZ/BR/ST
- Improved PASID/VM integration
- Expose GPU voltage and power via hwmon
- Initial wattman-like support
- Initial power profiles for use-case optimized performance
- Rework GPUVM TLB flushing
- Rework IP offset handling for SOC15 asics
- Add CRC support in DC
- Fixes for mmhub powergating
- Initial regamma/degamma/CTM support in DC
- ttm cleanups and simplifications
- ttm OOM avoidance fixes
* 'drm-next-4.17' of git://people.freedesktop.org/~agd5f/linux: (348 commits)
Revert "drm/radeon/pm: autoswitch power state when in balanced mode"
drm/radeon: use drm_gem_private_object_init
drm/amdgpu: use drm_gem_private_object_init
drm/amdgpu: mitigate workaround for i915
drm/amdgpu: implement amdgpu_gem_map_(attach/detach)
drm/amdgpu/powerplay/smu7: drop refresh rate checks for mclk switching
drm/amdgpu/cgs: add refresh rate checking to non-DC display code
drm/amd/powerplay/smu7: allow mclk switching with no displays
drm/amd/powerplay/vega10: allow mclk switching with no displays
drm/amd/powerplay: use PP_CAP macro for disable_mclk_switching_for_frame_lock
drm/amd/powerplay: remove unused headers
drm/amdgpu_gem: fix error handling path in amdgpu_gem_va_update_vm
drm/amdgpu: update the PASID mapping only on demand
drm/amdgpu: separate PASID mapping from VM flush v2
drm/amd/display: Fix increment when sampling OTF in DCE
drm/amd/display: De PQ implementation
drm/amd/display: Remove unused dm_pp_ interfaces
drm/amd/display: Add logging for aux DPCD access
drm/amd/display: Set vsc pack revision when DPCD revision is >= 1.2
drm/amd/display: provide an interface to query firmware version
...
Cross-subsystem Changes:
- Backlight helpers to enable/disable and find devices in dt (Meghana)
Core Changes:
- Documentation improvements (Chris/Daniel/Jani)
- simple_kms_helper: Add mode_valid() support (Linus)
- mm: Fix bug in interval_tree causing nodes to be out-of-order (Chris)
Driver Changes:
- tinydrm/panel: Use the new backlight helpers (Meghana)
- rockchip: Support gem_prime_import_sg_table + some fixes (Various)
- sun4i: Add A83T HDMI support using dw-hdmi (Jernej)
Cc: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlqN15UACgkQlvcN/ahK
BwrQZwf/UMzK235ccIKn5OQRd2t4bi8aTTqa1Rfh0+t6Vw6gJvNG6aIuj4Nb5SUd
9PNJJOX3ENBuTEiQiuENF0oXBGU3bsZNb5TcasEg9ShhD6b59gS9k1HI+Qwzr4uB
xHL85yVPaOP2vNCywwDoWhPjNMySv0PDScEVVLK2CTqpllZuB0FzEOOUknRk7Phn
1jeVeAe0sfx27EJSOtandNewa3JvAtSRAjeFQ3EBfbc43opi1LxURnOig8Gz3csf
b7x46lYtweZ9NH0Ybg584nLppAdG6hUnb7VPsAJK+KiR5Bn57J6et1g7WEzaRhSI
hO6B5AcMspsFRMkWcyPiIEdqv9mVkQ==
=kZmv
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 4.17:
Cross-subsystem Changes:
- Backlight helpers to enable/disable and find devices in dt (Meghana)
Core Changes:
- Documentation improvements (Chris/Daniel/Jani)
- simple_kms_helper: Add mode_valid() support (Linus)
- mm: Fix bug in interval_tree causing nodes to be out-of-order (Chris)
Driver Changes:
- tinydrm/panel: Use the new backlight helpers (Meghana)
- rockchip: Support gem_prime_import_sg_table + some fixes (Various)
- sun4i: Add A83T HDMI support using dw-hdmi (Jernej)
Cc: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
* tag 'drm-misc-next-2018-02-21' of git://anongit.freedesktop.org/drm/drm-misc: (41 commits)
drm/omapdrm: Use of_find_backlight helper
drm/panel: Use of_find_backlight helper
drm/omapdrm: Use backlight_enable/disable helpers
drm/panel: Use backlight_enable/disable helpers
drm/tinydrm: Call devres version of of_find_backlight
drm/tinydrm: Replace tinydrm_of_find_backlight with of_find_backlight
drm/tinydrm: Convert tinydrm_enable/disable_backlight to backlight_enable/disable
drm: add documentation for tv connector state margins
drm/doc: Use new substruct support
drm/doc: Polish for drm_mode_parse_command_line_for_connector
drm/docs: Document "scaling mode" property better
drm/docs: Align layout of optional plane blending properties
drm/docs: Discourage adding more to kms-properties.csv
drm: simple_kms_helper: Add mode_valid() callback support
drm/todo: Add idr_init_base todo
drm: Use idr_init_base(1) when using id==0 for invalid
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
drm: NULL pointer dereference [null-pointer-deref] (CWE 476) problem
dma-buf/sw_sync: Fix kerneldoc warnings
drm: Fix kerneldoc warnings for drm_lease
...
LVDS startup fixes, enable VSP compositor on GEN3
* 'drm/next/du' of git://linuxtv.org/pinchartl/media:
drm: rcar-du: lvds: Refactor LVDS startup
drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen3
drm: rcar-du: lvds: Fix LVDS startup on R-Car Gen2
drm: rcar-du: lvds: Fix LVDS clock frequency range
drm: rcar-du: lvds: Fix LVDCR1 for R-Car gen3
drm: rcar-du: Enable VSP compositor by default on Gen3
drm: rcar-du: Calculate DPLLCR to be more small jitter
drm: rcar-du: Use 1000 to avoid misunderstanding in rcar_du_dpll_divider()
drm: rcar-du: Remove zpos field from rcar_du_vsp_plane_state structure
We use our own backing store and don't need the shmem file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We use our own backing store and don't need the shmem file.
Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To be able to use DRI_PRIME with amdgpu and i915 we add all our fences
only as exclusive ones.
Disable that behavior when sharing between amdgpu itself cause it
hinders concurrent execution.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of the pin/unpin callback implement the attach/detach ones.
Functional identical, but allows us access to the attachment.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than trusting the cached value of plane_state->vma->fence to
imply whether the plane_state itself holds a reference on the
framebuffer's fence, use the information provided in the
plane_state->flags (PLANE_HAS_FENCE). Note that we still assume that FBC
is entirely bounded by the plane_state active life span; it's not clear
if that is a safe assumption.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-4-chris@chris-wilson.co.uk
Use the information about the fence state from the time of pinning to
determine if the fbdev writes are going through a fence. This avoids any
confusion in cases where the fence may appear or disappear unconnected
to the use by fbdev.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-3-chris@chris-wilson.co.uk
We cannot simply use !view as shorthand for all normal GGTT views as a
few callers will always populate a i915_ggtt_view struct and set the
type to NORMAL instead. So check for (!view || view->type == NORMAL)
inside i915_gem_object_ggtt_pin().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220134208.24988-1-chris@chris-wilson.co.uk
i965 and g4x still have the pipe select bits in the plane control
registers, they're just hardcoded to select a specific pipe. However
plane C on i965 can still move between the pipes, thus we should
program the pipe select bits on i965 if we want to expose plane C
some day.
Since there is no harm in programming the bits on any plane on
i965/g4x let's just always set them. This will also make our
pre-computed register value match what the hardware register
would read, should we want to cross check the two.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130203807.13721-2-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
G4x cursor control registers still allow us to write to the pipe select
bits even though cursors are supposed to be fixed to a specific pipe.
Bspec tells us that we should only ever write 0 to these bits. Let's
follow that recommendation. On ilk+ the bits become hardwired to 0.
Also looks like ICL repurposes these bits for some other use, so
we had better stop setting them to bogus values there.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180130203807.13721-1-ville.syrjala@linux.intel.com
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Add some compile time assrts to the frontbuffer tracking to make sure
that we have enough bits per pipe to cover all the planes, and that we
have enough total bits to cover all the planes across all pipes.
We'll ignore any potential clash between the overlay bit and the
plane bits because that will allow us to keep using a total of 32
bits for the foreseeable future.
While at it change the macros to use BIT() and GENMASK(). The latter
gets rid of the hardcoded 0xff and thus means we can change the
number of bits per pipe by just changing
INTEL_FRONTBUFFER_BITS_PER_PIPE.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180124183642.32549-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Use backlight_enable/disable helpers instead of changing
the property and calling backlight_update_status for cleaner
and simpler code and also to avoid repetitions.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/bc80cdb5cf1a6638dce9fb9f8da674e361e3b749.1516810725.git.meghana.madhyastha@gmail.com
Remove tinydrm_of_find_backlight from tinydrm-helpers.c. We now have
a generic of_find_backlight defined in backlight.c. Let the callers
of tinydrm_of_find_backlight call of_find_backlight. Also, remove
select BACKLIGHT_LCD_SUPPORT and select BACKLIGHT_CLASS_DEVICE from
tinydrm/Kconfig as it is a hack that is no longer needed.
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Meghana Madhyastha <meghana.madhyastha@gmail.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/11dd1cabd098a730d07ab04c5987b139d14d8b21.1516810725.git.meghana.madhyastha@gmail.com
Move it out of the csv dungeon.
While at it add the missing link to the helper functions for setting
up the "panel rotation" property.
Also OCD how we list enum property values and their corresponding docs.
Going for a nest definition list seams cleanest, no need for also making
it an uordered list.
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219225356.24996-3-daniel.vetter@ffwll.ch
During igt, we frequently call into the driver to reset both HW and
driver state (idling the device, waiting for it to become idle and
freeing off old objects) to ensure that we start each test/subtest/pass
from known state. This process incurs an RCU barrier or two to ensure
that any such pending frees are indeed flushed before we return.
However, unconditionally waiting on the RCU barrier adds needless delay
to many callers, which adds up to several seconds when repeated thousands
of times. We can skip the rcu_barrier() if by tracking how many outstanding
frees we have, we know there are none.
The same path is used along suspend, where we may be able to save the
unconditional RCU barrier.
To put it into perspective with a completely meaningless
microbenchmark, igt/gem_sync/idle is improved from 50ms to 30us on bdw.
v2: Remove the extra synchronize_rcu() inside i915_drop_caches_set()
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219220631.25001-1-chris@chris-wilson.co.uk
The PL111 needs to filter valid modes based on memory bandwidth.
I guess it is a pretty simple operation, so we can still claim
the DRM KMS helper pipeline is simple after adding this (optional)
vtable callback.
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220072859.3386-1-linus.walleij@linaro.org
clang spots
drivers/gpu/drm/i915/intel_pm.c:4655:6: warning: variable 'trans_min' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
if (INTEL_GEN(dev_priv) >= 10)
but fortunately for us we skip the function unless on a gen10+ device.
However, to keep the function generic in case we do want to re-enable it
for gen9 again, initialise trans_min to 0.
References: ca47667f52 ("drm/i915/gen10: Calculate and enable transition WM")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171115105036.1094-3-chris@chris-wilson.co.uk
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If we fail to unbind the vma (due to a signal on an active buffer that
needs to be moved for the next execbuf), then we need to clear the
persistent tracking state we setup for this execbuf.
Fixes: c7c6e46f91 ("drm/i915: Convert execbuf to use struct-of-array packing for critical fields")
Testcase: igt/gem_fenced_exec_thrash/no-spare-fences-busy*
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180219140144.24004-1-chris@chris-wilson.co.uk
The logic has moved to cgs. mclk switching with DC at higher refresh
rates should work.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Clamp the vblank period to 0 if the refresh rate is larger than
120 hz for non-DC. This allows us to remove the refresh rate
checks from powerplay for mclk switching.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there are no displays attached, there is no reason to disable
mclk switching.
Fixes mclks getting set to high when there are no displays attached.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
If there are no displays attached, there is no reason to disable
mclk switching.
Fixes mclks getting set to high when there are no displays attached.
Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
All thoses headers are not used by any source files.
Lets just remove them.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, if amdgpu_vm_bo_update() fails, the returned error
is being ignored.
Fix this by properly checking _r_ after calling amdgpu_vm_bo_update.
Also, remove redundant code just before label _error_.
Addresses-Coverity-ID: 1464280 ("Unused value")
Fixes: 0abc6878fc ("drm/amdgpu: update VM PDs after the PTs")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Updating the PASID is rather heavyweight and shouldn't be done all the
time.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stuffing the PASID mapping into the VM flush isn't flexible enough since
the PASID mapping changes not as often as we need a VM flush.
v2: add missing use of gmc_v7_0_emit_pasid_mapping
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously, the number of software segmets per region was reduced to 16.
This needs to be reflected in the sampling distance (increment) used when
translating to the hardware format.
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some refactoring and optimizations in color module.
Added de gamma 2.2 & 2.4, also re gamma 2.2.
Added interface for diagnostic for de gamma & de pq.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add basic logging for DPCD access. Does not print
by default.
Currently only prints first byte of the data accessed.
Technical debt: Need to make it so that the entire
data block accessed is printed. Also need to log
address space that's not DPCD.
Signed-off-by: Eric Yang <Eric.Yang2@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
