NVIDIA binary driver appears to, not sure if it's for a good reason, but
grasping at straws for some GDDR5 reclocking issues here.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Time measured from disabling FB to re-enabling, PPWR_IN reveals status of
heads at the end of script. Helps debug various issues (like flicker).
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Needs to be done after wait-for-VBLANK, and NVA3 requires register writes
in between.
Rather than hard-coding register writes, just split out fb_disable and
fb_enable.
v2. Squashed "fb/ramnve0: disable fb before reclocking"
Signed-off-by: Roy Spliet <rspliet@eclipso.eu>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
One of my nv92 has a calibrated internal sensor but it displays 0°C
as the default values use sw calibration values to force the temperature
to 0.
Since we cannot read the temperature from the adt7473 present on this board,
let's re-enable the internal reading!
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
We will use this subdev to disable temperature reading on cards that did not
get a sensor calibration in the factory.
v2:
- rename "nouveau_fuse_rd32" to "gxXXX_fuse_rd32" as adviced by Christian Costa
- fold the code a little as adviced by Emil Velikov
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It can help to remove any ambiguity about which options were passed to Nouveau,
especially in case the user had some options set in /etc/modprobe.d/*.conf that
he forgot about, as they won't appear in a dmesg.
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The problem with the current implementation is that adding a timer improperly
checked which process would time up first by not taking into account how much
time elapsed since their timer got scheduled. Rework the re-scheduling
decision t fix this.
The catch with this fix is that we are limited to scheduling timers of up to
2^31 ticks to avoid any potential overflow. Since we are unlikely to need to
wait for more than a second, this won't be a problem :)
Another possible fix would be to decrement the timeouts of all processes but
it would duplicate a lot of code and dealing with edge cases wasn't pretty
last time I checked.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
For some reason, it is now required to wait a 20 µs after the 0x200 reset of
the engine.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
v2: change the copyright ownership from "Nouveau Community" to myself, as per
Illia's recommendation.
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Re-use the therm-exported fan structure with only two minor modifications:
- pwm_freq: u16 -> u32;
- add fan_type (toggle or PWM)
v2:
- Do not memset the table to 0 as it erases the pre-set default values
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
The allocation algorithm doesn't expect there to be holes in the mm, which
causes its alignment/cutoff calculations to choke (and go negative) when
encountering the last chunk of a block before a hole.
The least expensive solution is to simply fill in any holes with nodes
that are pre-marked as being allocated.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
This is really the wrong thing to do, but at the time it was our only
option to prevent worse issues.
We no longer cause quite so much anger from LTC, so it's not needed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
So here's the header cleanup, rebased on top of drm-next. Two new header
files are created here:
- drivers/gpu/drm/drm_internal.h for non-legacy drm.ko private
declarations.
- include/drm/drm_legacy.h for legacy interfaces used by non-kms drivers.
And of course lots fo stuff gets shuffled into the already existing
drivers/gpu/drm/drm_legacy.h for drm.ko internal stuff.
topic branch smoke-tested in drm-intel-nightly for a bit. And the 0day
tester also worked through it (and found a few places I didn't add a
static to functions).
* tag 'topic/drm-header-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel:
drm: Move DRM_MAGIC_HASH_ORDER into drm_drv.c
drm: Move drm_class to drm_internal.h
drm: Move LOCK_TEST_WITH_RETURN to <drm/drm_legacy.h>
drm: Move legacy buffer structures to <drm/drm_legacy.h>
drm: Move drm_memory.c map support declarations to <drm/drm_legacy.h>
drm: Purge ioctl forward declarations from drmP.h
drm: unexport drm_global_mutex
drm: Move piles of functions from drmP.h to drm_internal.h
drm: Move vblank related module options into drm_irq.c
drm: Drop drm_sysfs_class from drmP.h
drm: Move __drm_pci_free to drm_legacy.h
drm: Create drm legacy driver header
drm: Move drm_legacy_vma_flush into drm_legacy.h
drm: Move sg functions into drm_legacy.h
drm: Move dma functions into drm_legacy.h
Unfortunately we can't move struct drm_lock_data easily since
it's embedded into struct drm_master. And figuring out where exactly
this struct should be allocated isn't that simple ...
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
