Upon receipt of the NETDEV_REGISTER event from the netdev notifier chain,
the IB stack registration is spawned off to a workqueue since that also
requires an rtnl lock.
There could be 2 kinds of races between the NETDEV_REGISTER and the
NETDEV_UNREGISTER event handling.
a)The NETDEV_UNREGISTER event is received in rapid succession after
the NETDEV_REGISTER event even before the work queue got a chance to run.
b)The NETDEV_UNREGISTER event is received while the workqueue that handles
registration with the IB stack is still in progress.
Handle both the races with a bit flag that is set just before the work item
is queued and cleared in the workqueue after the event is handled just
before the workqueue item is freed.
While adding the new flag, it was noted that the flags are all used in
*_bit() operations which expect a bit number and not a literal constant
with a bit set. So change the numbers to be bit numbers.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Clean up all devices added to the bnxt_re_dev_list in the
module_exit entry point.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Driver must assign the user supplied compare/swap values in
the wqe to successfully complete the atomic compare and
swap operation.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Once a cmd to FW times out(after 20s) it is reasonable to
assume the FW or atleast the control path is dead.
No point issuing further cmds to the FW as each subsequent cmd
with another 20s timeout will cascade resulting in unnecessary
traces and/or NMI Lockups.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The MTU value in the qplib_qp.mtu should be
consistent with whatever mtu was set during
INIT to RTR.The Next PSN and number of packets
are calculated based on this member in the qplib_qp structure.
Signed-off-by: Narender Reddy <narender.reddy@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
During OpenMPI scale up testing, we observe rdma_connect
failures if ports are reused on multiple connections.
This is because the Control Queue-Pair (CQP) command to add
the reused port to Accelerated Port Bit VectorTable (APBVT)
fails as there already exists an entry.
Check for duplicate port before invoking the CQP command
to add APBVT entry and delete the entry only if the port
is not in use.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Set the VLAN priority which is in the upper 3 bits of the VLAN
tag field in the QP context.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If QP modify to closing/terminate/error fails, connection is
not torn down as there is no corresponding asynchronous
event that will initiate the teardown.
Add explicit call to i40iw_cm_disconn if not waiting in
modify QP, otherwise schedule it in CM timer.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Check number of available MSI-X vectors for i40iw.
If there are no available vectors, fail the open.
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reduce stack size by dynamically allocating memory instead
of declaring large struct on the stack:
drivers/infiniband/hw/bnxt_re/ib_verbs.c: In function ‘bnxt_re_query_qp’:
drivers/infiniband/hw/bnxt_re/ib_verbs.c:1600:1: warning: the frame size of 1216 bytes is larger than 1024 bytes [-Wframe-larger-than=]
}
^
Cc: Selvin Xavier <selvin.xavier@broadcom.com>
Fixes: 1ac5a40479 ("RDMA/bnxt_re: Add bnxt_re RoCE driver")
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If delay_drop_debugfs_init() fails in any of the operations to create
debugfs, it is calling delay_drop_debugfs_cleanup() as part of its
cleanup. But delay_drop_debugfs_cleanup() checks for 'dbg' and since
we have not yet pointed 'dbg' to the debugfs we need to cleanup, the
cleanup fails and we are left with stray debugfs elements and also a
memory leak.
Fixes: 4a5fd5d296 ("IB/mlx5: Add necessary delay drop assignment")
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the case where mbox_status is OCRDMA_MBX_STATUS_FAILED and
add_status is OCRDMA_MBX_STATUS_FAILED err_num is assigned -EAGAIN
however the case OCRDMA_MBX_STATUS_FAILED is missing a break and
falls through to the default case which then re-assigns err_num
to -EFAULT. Fix this so that err_num is assigned to -EAGAIN
for the add_status OCRDMA_MBX_STATUS_FAILED case and -EFAULT
otherwise.
Detected by CoverityScan CID#703125 ("Missing break in switch")
Fixes: fe2caefcdf ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
IPoIB doesn't support transport/rnr retry schemes as per
RFC so those errors are expected. No need to flood the
log files with them.
Tested-by: Michael Nowak <michael.nowak@oracle.com>
Tested-by: Rafael Alejandro Peralez <rafael.peralez@oracle.com>
Tested-by: Liwen Huang <liwen.huang@oracle.com>
Tested-by: Hong Liu <hong.x.liu@oracle.com>
Reviewed-by: Mukesh Kacker <mukesh.kacker@oracle.com>
Reported-by: Rajiv Raja <rajiv.raja@oracle.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If a listen create fails, then the server tid (stid) is incorrectly left
in the stid idr table, which can cause a touch-after-free if the stid
is looked up and the already freed endpoint is touched. So make sure
and remove it in the error path.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the thread waiting for a CLOSE_LISTSRV_RPL times out and bails,
then we need to handle a subsequent CPL if it arrives and the stid has
been released. In this case silently drop it.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The listening endpoint should always be dereferenced at the end of
pass_accept_req().
Fixes: f86fac79af ("RDMA/iw_cxgb4: atomic find and reference for listening endpoints")
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add CONFIG_INFINIBAND_EXP_USER_ACCESS that enables the ioctl
interface. This interface is experimental and is subject to change.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to use the parsing tree, we need to assign the root
to all drivers. Currently, we just assign the default parsing
tree via ib_uverbs_add_one. The driver could override this by
assigning a parsing tree prior to registering the device.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Adding CQ ioctl actions:
1. create_cq
2. destroy_cq
This requires adding the following:
1. A specification describing the method
a. Handler
b. Attributes specification
Each attribute is one of the following:
a. PTR_IN - input data
Note: This could be encoded inlined for
data < 64bit
b. PTR_OUT - response data
c. IDR - idr based object
d. FD - fd based object
Blobs attributes (clauses a and b) contain their type,
while objects specifications (clauses c and d)
contains the expected object type (for example, the
given id should be UVERBS_TYPE_PD) and the required
access (READ, WRITE, NEW or DESTROY). If a NEW is
required, the new object's id will be assigned to this
attribute. All attributes could get UA_FLAGS
attribute. Currently we support stating that an
attribute is mandatory or that the specification size
corresponds to a lower bound (and that this attribute
could be extended).
We currently add both default attributes and the two
generic UHW_IN and UHW_OUT driver specific attributes.
2. Handler
A handler gets a uverbs_attr_bundle. The handler developer uses
uverbs_attr_get to fetch an attribute of a given id.
Each of these attribute groups correspond to the specification
group defined in the action (clauses 1.b and 1.c respectively).
The indices of these arrays corresponds to the attribute ids
declared in the specifications (clause 2).
The handler is quite simple. It assumes the infrastructure fetched
all objects and locked, created or destroyed them as required by
the specification. Pointer (or blob) attributes were validated to
match their required sizes. After the handler finished, the
infrastructure commits or rollbacks the objects.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In this phase, we don't want to change all the drivers to use
flexible driver's specific attributes. Therefore, we add two default
attributes: UHW_IN and UHW_OUT. These attributes are optional in some
methods and they encode the driver specific command data. We add
a function that extract this data and creates the legacy udata over
it.
Driver's data should start from UVERBS_UDATA_DRIVER_DATA_FLAG. This
turns on the first bit of the namespace, indicating this attribute
belongs to the driver's namespace.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add a new ib_user_ioctl_verbs.h which exports all required ABI
enums and structs to the user-space.
Export the default types to user-space through this file.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When some objects are destroyed, we need to extract their status at
destruction. After object's destruction, this status
(e.g. events_reported) relies in the uobject. In order to have the
latest and correct status, the underlying object should be destroyed,
but we should keep the uobject alive and read this information off the
uobject. We introduce a rdma_explicit_destroy function. This function
destroys the class type object (for example, the IDR class type which
destroys the underlying object as well) and then convert the uobject
to be of a null class type. This uobject will then be destroyed as any
other uobject once uverbs_finalize_object[s] is called.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds macros for declaring objects, methods and
attributes. These definitions are later used by downstream patches
to declare some of the default types.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Different drivers support different features and even subset of the
common uverbs implementation. Currently, this is handled as bitmask
in every driver that represents which kind of methods it supports, but
doesn't go down to attributes granularity. Moreover, drivers might
want to add their specific types, methods and attributes to let
their user-space counter-parts be exposed to some more efficient
abstractions. It means that existence of different features is
validated syntactically via the parsing infrastructure rather than
using a complex in-handler logic.
In order to do that, we allow defining features and abstractions
as parsing trees. These per-feature parsing tree could be merged
to an efficient (perfect-hash based) parsing tree, which is later
used by the parsing infrastructure.
To sum it up, this makes a parse tree unique for a device and
represents only the features this particular device supports.
This is done by having a root specification tree per feature.
Before a device registers itself as an IB device, it merges
all these trees into one parsing tree. This parsing tree
is used to parse all user-space commands.
A future user-space application could read this parse tree. This
tree represents which objects, methods and attributes are
supported by this device.
This is based on the idea of
Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This adds the DEVICE object. This object supports creating the context
that all objects are created from. Moreover, it supports executing
methods which are related to the device itself, such as QUERY_DEVICE.
This is a singleton object (per file instance).
All standard objects are put in the root structure. This root will later
on be used in drivers as the source for their whole parsing tree.
Later on, when new features are added, these drivers could mix this root
with other customized objects.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Switch all uverbs_type_attrs_xxxx with DECLARE_UVERBS_OBJECT
macros. This will be later used in order to embed the object
specific methods in the objects as well.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In this ioctl interface, processing the command starts from
properties of the command and fetching the appropriate user objects
before calling the handler.
Parsing and validation is done according to a specifier declared by
the driver's code. In the driver, all supported objects are declared.
These objects are separated to different object namepsaces. Dividing
objects to namespaces is done at initialization by using the higher
bits of the object ids. This initialization can mix objects declared
in different places to one parsing tree using in this ioctl interface.
For each object we list all supported methods. Similarly to objects,
methods are separated to method namespaces too. Namespacing is done
similarly to the objects case. This could be used in order to add
methods to an existing object.
Each method has a specific handler, which could be either a default
handler or a driver specific handler.
Along with the handler, a bunch of attributes are specified as well.
Similarly to objects and method, attributes are namespaced and hashed
by their ids at initialization too. All supported attributes are
subject to automatic fetching and validation. These attributes include
the command, response and the method's related objects' ids.
When these entities (objects, methods and attributes) are used, the
high bits of the entities ids are used in order to calculate the hash
bucket index. Then, these high bits are masked out in order to have a
zero based index. Since we use these high bits for both bucketing and
namespacing, we get a compact representation and O(1) array access.
This is mandatory for efficient dispatching.
Each attribute has a type (PTR_IN, PTR_OUT, IDR and FD) and a length.
Attributes could be validated through some attributes, like:
(*) Minimum size / Exact size
(*) Fops for FD
(*) Object type for IDR
If an IDR/fd attribute is specified, the kernel also states the object
type and the required access (NEW, WRITE, READ or DESTROY).
All uobject/fd management is done automatically by the infrastructure,
meaning - the infrastructure will fail concurrent commands that at
least one of them requires concurrent access (WRITE/DESTROY),
synchronize actions with device removals (dissociate context events)
and take care of reference counting (increase/decrease) for concurrent
actions invocation. The reference counts on the actual kernel objects
shall be handled by the handlers.
objects
+--------+
| |
| | methods +--------+
| | ns method method_spec +-----+ |len |
+--------+ +------+[d]+-------+ +----------------+[d]+------------+ |attr1+-> |type |
| object +> |method+-> | spec +-> + attr_buckets +-> |default_chain+--> +-----+ |idr_type|
+--------+ +------+ |handler| | | +------------+ |attr2| |access |
| | | | +-------+ +----------------+ |driver chain| +-----+ +--------+
| | | | +------------+
| | +------+
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+--------+
[d] = Hash ids to groups using the high order bits
The right types table is also chosen by using the high bits from
the ids. Currently we have either default or driver specific groups.
Once validation and object fetching (or creation) completed, we call
the handler:
int (*handler)(struct ib_device *ib_dev, struct ib_uverbs_file *ufile,
struct uverbs_attr_bundle *ctx);
ctx bundles attributes of different namespaces. Each element there
is an array of attributes which corresponds to one namespaces of
attributes. For example, in the usually used case:
ctx core
+----------------------------+ +------------+
| core: +---> | valid |
+----------------------------+ | cmd_attr |
| driver: | +------------+
|----------------------------+--+ | valid |
| | cmd_attr |
| +------------+
| | valid |
| | obj_attr |
| +------------+
|
| drivers
| +------------+
+> | valid |
| cmd_attr |
+------------+
| valid |
| cmd_attr |
+------------+
| valid |
| obj_attr |
+------------+
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We should report the network header type in the work completion so that
the kernel can infer the right RoCE type headers.
Reviewed-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For RoCE, ib_init_ah_from_wc() can follow the path
ib_init_ah_from_wc() ->
rdma_addr_find_l2_eth_by_grh() ->
rdma_resolve_ip()
and rdma_resolve_ip() will sleep in kzalloc() and wait_for_completion().
However, developers will not see any warnings if they use ib_init_ah_from_wc()
in an atomic context and test only on IB, because the function doesn't
sleep in that case.
Add a might_sleep() so that lockdep will catch bugs no matter what hardware is
used to test.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A couple of places in the CM do
spin_lock_irq(&cm_id_priv->lock);
...
if (cm_alloc_response_msg(work->port, work->mad_recv_wc, &msg))
However when the underlying transport is RoCE, this leads to a sleeping function
being called with the lock held - the callchain is
cm_alloc_response_msg() ->
ib_create_ah_from_wc() ->
ib_init_ah_from_wc() ->
rdma_addr_find_l2_eth_by_grh() ->
rdma_resolve_ip()
and rdma_resolve_ip() starts out by doing
req = kzalloc(sizeof *req, GFP_KERNEL);
not to mention rdma_addr_find_l2_eth_by_grh() doing
wait_for_completion(&ctx.comp);
to wait for the task that rdma_resolve_ip() queues up.
Fix this by moving the AH creation out of the lock.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The new ioctl based infrastructure either commits or rollbacks
all objects of the method as one transaction. In order to do
that, we introduce a notion of dealing with a collection of
objects that are related to a specific method.
This also requires adding a notion of a method and attribute.
A method contains a hash of attributes, where each bucket
contains several attributes. The attributes are hashed according
to their namespace which resides in the four upper bits of the id.
For example, an object could be a CQ, which has an action of CREATE_CQ.
This action has multiple attributes. For example, the CQ's new handle
and the comp_channel. Each layer in this hierarchy - objects, methods
and attributes is split into namespaces. The basic example for that is
one namespace representing the default entities and another one
representing the driver specific entities.
When declaring these methods and attributes, we actually declare
their specifications. When a method is executed, we actually
allocates some space to hold auxiliary information. This auxiliary
information contains meta-data about the required objects, such
as pointers to their type information, pointers to the uobjects
themselves (if exist), etc.
The specification, along with the auxiliary information we allocated
and filled is given to the finalize_objects function.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The ioctl infrastructure treats all user-objects in the same manner.
It gets objects ids from the user-space and by using the object type
and type attributes mentioned in the object specification, it executes
this required method. Passing an object id from the user-space as
an attribute is carried out in three stages. The first is carried out
before the actual handler and the last is carried out afterwards.
The different supported operations are read, write, destroy and create.
In the first stage, the former three actions just fetches the object
from the repository (by using its id) and locks it. The last action
allocates a new uobject. Afterwards, the second stage is carried out
when the handler itself carries out the required modification of the
object. The last stage is carried out after the handler finishes and
commits the result. The former two operations just unlock the object.
Destroy calls the "free object" operation, taking into account the
object's type and releases the uobject as well. Creation just adds the
new uobject to the repository, making the object visible to the
application.
In order to abstract these details from the ioctl infrastructure
layer, we add uverbs_get_uobject_from_context and
uverbs_finalize_object functions which corresponds to the first
and last stages respectively.
Signed-off-by: Matan Barak <matanb@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add document providing definitions of terms and core explanations
for tag matching (TM) protocols, eager and rendezvous,
TM application header, tag list manipulations and matching process.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pass to mlx5_core flag to enable rendezvous offload, list_size and CQ
when SRQ created with IB_SRQT_TM.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add support to new XRQ(eXtended shared Receive Queue)
hardware object. It supports SRQ semantics with addition
of extended receive buffers topologies and offloads.
Currently supports tag matching topology and rendezvouz offload.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add new SRQ type capable of new tag matching feature.
When SRQ receives a message it will search through the matching list
for the corresponding posted receive buffer. The process of searching
the matching list is called tag matching.
In case the tag matching results in a match, the received message will
be placed in the address specified by the receive buffer. In case no
match was found the message will be placed in a generic buffer until the
corresponding receive buffer will be posted. These messages are called
unexpected and their set is called an unexpected list.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add tm_list_size parameter to struct ib_uverbs_create_xsrq.
If SRQ type is tag-matching this field defines maximum size
of tag matching list. Otherwise, it is expected to be zero.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds new SRQ type - IB_SRQT_TM. The new SRQ type supports tag
matching and rendezvous offloads for MPI applications.
When SRQ receives a message it will search through the matching list
for the corresponding posted receive buffer. The process of searching
the matching list is called tag matching.
In case the tag matching results in a match, the received message will
be placed in the address specified by the receive buffer. In case no
match was found the message will be placed in a generic buffer until the
corresponding receive buffer will be posted. These messages are called
unexpected and their set is called an unexpected list.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Before this change CQ attached to SRQ was part of XRC specific extension.
Moving CQ handle out makes it available to other types extending SRQ
functionality.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds following TM XRQ capabilities:
* max_rndv_hdr_size - Max size of rendezvous request message
* max_num_tags - Max number of entries in tag matching list
* max_ops - Max number of outstanding list operations
* max_sge - Max number of SGE in tag matching entry
* flags - the following flags are currently defined:
- IB_TM_CAP_RC - Support tag matching on RC transport
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Yossi Itigin <yosefe@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Without this fix, ports configured on top of ixgbe miss link up
notifications. ibv_query_port() will continue to return IBV_PORT_DOWN even
though the port is up and working.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The current process is to first calculate the CRC and then copy the client
data into the packet. This leaves a window in which the packet contents and
CRC can get out of sync, if the client changes the data after the CRC is
calculated but before the data is copied.
By copying the data into the packet and then calculating the CRC directly
from the packet contents we eliminate the window.
This can be seen with qperf's ud_bi_bw test. This seems like very
strange/reckless client behavior, but whether the client has mangled its
data or not RXE should be able to transfer it reliably.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This fixes another path in rxe_requester() that might overlook stale SKBs,
preventing cleanup.
Fixes: 1217197142 ("rxe: fix broken receive queue draining")
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
