Linux kernel Image can appear as an EFI application With appropriate
PE/COFF header fields in the beginning of the Image header. An EFI
application loader can directly load a Linux kernel Image and an EFI
stub residing in kernel can boot Linux kernel directly.
Add the necessary PE/COFF header.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Link: https://lore.kernel.org/r/20200421033336.9663-3-atish.patra@wdc.com
[ardb: - use C prefix for c.li to ensure the expected opcode is emitted
- align all image sections according to PE/COFF section alignment ]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
UEFI uses early IO or memory mappings for runtime services before
normal ioremap() is usable. Add the necessary fixmap bindings and
pmd mappings for generic ioremap support to work.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, RISC-V reserves 1MB of fixmap memory for device tree. However,
it maps only single PMD (2MB) space for fixmap which leaves only < 1MB space
left for other kernel features such as early ioremap which requires fixmap
as well. The fixmap size can be increased by another 2MB but it brings
additional complexity and changes the virtual memory layout as well.
If we require some additional feature requiring fixmap again, it has to be
moved again.
Technically, DT doesn't need a fixmap as the memory occupied by the DT is
only used during boot. That's why, We map device tree in early page table
using two consecutive PGD mappings at lower addresses (< PAGE_OFFSET).
This frees lot of space in fixmap and also makes maximum supported
device tree size supported as PGDIR_SIZE. Thus, init memory section can be used
for the same purpose as well. This simplifies fixmap implementation.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
asm/thread_info.h is included more than once, Remove the one that isn't
necessary.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
There are no standard CSR registers to provide cache information, the
way for RISC-V is to get this information from DT. Currently, AT_L1I_X,
AT_L1D_X and AT_L2_X are present in glibc header, and sysconf syscall
could use them to get information of cache through AUX vector.
The result of 'getconf -a' as follows:
LEVEL1_ICACHE_SIZE 32768
LEVEL1_ICACHE_ASSOC 8
LEVEL1_ICACHE_LINESIZE 64
LEVEL1_DCACHE_SIZE 32768
LEVEL1_DCACHE_ASSOC 8
LEVEL1_DCACHE_LINESIZE 64
LEVEL2_CACHE_SIZE 2097152
LEVEL2_CACHE_ASSOC 32
LEVEL2_CACHE_LINESIZE 64
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Set cacheinfo.{size,sets,line_size} for each cache node, then we can
get these information from userland through auxiliary vector.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Right now the RISC-V timer driver is convoluted to support:
1. Linux RISC-V S-mode (with MMU) where it will use TIME CSR for
clocksource and SBI timer calls for clockevent device.
2. Linux RISC-V M-mode (without MMU) where it will use CLINT MMIO
counter register for clocksource and CLINT MMIO compare register
for clockevent device.
We now have a separate CLINT timer driver which also provide CLINT
based IPI operations so let's remove CLINT MMIO related code from
arch/riscv directory and RISC-V timer driver.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We add mechanism to set custom IPI operations so that CLINT driver
from drivers directory can provide custom IPI operations.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Tested-by: Emil Renner Berhing <kernel@esmil.dk>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Exception vector is missing on nommu platform and that is an issue.
This patch is tested in Sipeed Maix Bit Dev Board.
Fixes: 79b1feba54 ("RISC-V: Setup exception vector early")
Suggested-by: Anup Patel <anup@brainfault.org>
Suggested-by: Atish Patra <atishp@atishpatra.org>
Signed-off-by: Qiu Wenbo <qiuwenbo@phytium.com.cn>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
We have a lot of new kernel features for this merge window:
* ARCH_SUPPORTS_ATOMIC_RMW, to allow OSQ locks to be enabled.
* The ability to enable NO_HZ_FULL
* Support for enabling kcov, kmemleak, stack protector, and VM debugging.
* JUMP_LABEL support.
There are also a handful of cleanups.
next points out a trivial Kconfig merge conflict. I don't see any way to have
done this better: the symbols are sorted, it just happens that
HAVE_COPY_THREAD_TLS was in the middle of two new symbols. In case it helps
any, here's a pretty current conflict resolution:
diff --cc arch/riscv/Kconfig
index bc37241a6875,6c4bce7cad8a..7b5905529146
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@@ -57,9 -54,6 +59,8 @@@ config RISC
select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_ASM_MODVERSIONS
+ select HAVE_CONTEXT_TRACKING
- select HAVE_COPY_THREAD_TLS
+ select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_CONTIGUOUS if MMU
select HAVE_EBPF_JIT if MMU
select HAVE_FUTEX_CMPXCHG if FUTEX
-----BEGIN PGP SIGNATURE-----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=asH5
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.9-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"We have a lot of new kernel features for this merge window:
- ARCH_SUPPORTS_ATOMIC_RMW, to allow OSQ locks to be enabled
- The ability to enable NO_HZ_FULL
- Support for enabling kcov, kmemleak, stack protector, and VM
debugging
- JUMP_LABEL support
There are also a handful of cleanups"
* tag 'riscv-for-linus-5.9-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (24 commits)
riscv: disable stack-protector for vDSO
RISC-V: Fix build warning for smpboot.c
riscv: fix build warning of mm/pageattr
riscv: Fix build warning for mm/init
RISC-V: Setup exception vector early
riscv: Select ARCH_HAS_DEBUG_VM_PGTABLE
riscv: Use generic pgprot_* macros from <linux/pgtable.h>
mm: pgtable: Make generic pgprot_* macros available for no-MMU
riscv: Cleanup unnecessary define in asm-offset.c
riscv: Add jump-label implementation
riscv: Support R_RISCV_ADD64 and R_RISCV_SUB64 relocs
Replace HTTP links with HTTPS ones: RISC-V
riscv: Add STACKPROTECTOR supported
riscv: Fix typo in asm/hwcap.h uapi header
riscv: Add kmemleak support
riscv: Allow building with kcov coverage
riscv: Enable context tracking
riscv: Support irq_work via self IPIs
riscv: Enable LOCKDEP_SUPPORT & fixup TRACE_IRQFLAGS_SUPPORT
riscv: Fixup lockdep_assert_held with wrong param cpu_running
...
Pull ptrace regset updates from Al Viro:
"Internal regset API changes:
- regularize copy_regset_{to,from}_user() callers
- switch to saner calling conventions for ->get()
- kill user_regset_copyout()
The ->put() side of things will have to wait for the next cycle,
unfortunately.
The balance is about -1KLoC and replacements for ->get() instances are
a lot saner"
* 'work.regset' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (41 commits)
regset: kill user_regset_copyout{,_zero}()
regset(): kill ->get_size()
regset: kill ->get()
csky: switch to ->regset_get()
xtensa: switch to ->regset_get()
parisc: switch to ->regset_get()
nds32: switch to ->regset_get()
nios2: switch to ->regset_get()
hexagon: switch to ->regset_get()
h8300: switch to ->regset_get()
openrisc: switch to ->regset_get()
riscv: switch to ->regset_get()
c6x: switch to ->regset_get()
ia64: switch to ->regset_get()
arc: switch to ->regset_get()
arm: switch to ->regset_get()
sh: convert to ->regset_get()
arm64: switch to ->regset_get()
mips: switch to ->regset_get()
sparc: switch to ->regset_get()
...
Currently, building the vDSO with clang leads assembler errors like the
following:
/tmp/vgettimeofday-1ae0d2.s: Assembler messages:
/tmp/vgettimeofday-1ae0d2.s:28: Error: bad expression
/tmp/vgettimeofday-1ae0d2.s:28: Error: illegal operands `auipc a2,%got_pcrel_hi(__stack_chk_guard)'
Disable the stack-protector for vDSO to fix these.
Link: https://github.com/ClangBuiltLinux/linux/issues/1112
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The following warnings are reported by kbuild with W=1.
>> arch/riscv/kernel/smpboot.c:109:5: warning: no previous prototype for
'start_secondary_cpu' [-Wmissing-prototypes]
109 | int start_secondary_cpu(int cpu, struct task_struct *tidle)
| ^~~~~~~~~~~~~~~~~~~
arch/riscv/kernel/smpboot.c:146:34: warning: no previous prototype for
'smp_callin' [-Wmissing-prototypes]
146 | asmlinkage __visible void __init smp_callin(void)
| ^~~~~~~~~~
Fix the warnings by marking the local functions static and adding the prototype
for the global function.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXyge/QAKCRCRxhvAZXjc
oildAQCCWpnTeXm6hrIE3VZ36X5npFtbaEthdBVAUJM7mo0FYwEA8+Wbnubg6jCw
mztkXCnTfU7tApUdhKtQzcpEws45/Qk=
=REE/
-----END PGP SIGNATURE-----
Merge tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull fork cleanups from Christian Brauner:
"This is cleanup series from when we reworked a chunk of the process
creation paths in the kernel and switched to struct
{kernel_}clone_args.
High-level this does two main things:
- Remove the double export of both do_fork() and _do_fork() where
do_fork() used the incosistent legacy clone calling convention.
Now we only export _do_fork() which is based on struct
kernel_clone_args.
- Remove the copy_thread_tls()/copy_thread() split making the
architecture specific HAVE_COYP_THREAD_TLS config option obsolete.
This switches all remaining architectures to select
HAVE_COPY_THREAD_TLS and thus to the copy_thread_tls() calling
convention. The current split makes the process creation codepaths
more convoluted than they need to be. Each architecture has their own
copy_thread() function unless it selects HAVE_COPY_THREAD_TLS then it
has a copy_thread_tls() function.
The split is not needed anymore nowadays, all architectures support
CLONE_SETTLS but quite a few of them never bothered to select
HAVE_COPY_THREAD_TLS and instead simply continued to use copy_thread()
and use the old calling convention. Removing this split cleans up the
process creation codepaths and paves the way for implementing clone3()
on such architectures since it requires the copy_thread_tls() calling
convention.
After having made each architectures support copy_thread_tls() this
series simply renames that function back to copy_thread(). It also
switches all architectures that call do_fork() directly over to
_do_fork() and the struct kernel_clone_args calling convention. This
is a corollary of switching the architectures that did not yet support
it over to copy_thread_tls() since do_fork() is conditional on not
supporting copy_thread_tls() (Mostly because it lacks a separate
argument for tls which is trivial to fix but there's no need for this
function to exist.).
The do_fork() removal is in itself already useful as it allows to to
remove the export of both do_fork() and _do_fork() we currently have
in favor of only _do_fork(). This has already been discussed back when
we added clone3(). The legacy clone() calling convention is - as is
probably well-known - somewhat odd:
#
# ABI hall of shame
#
config CLONE_BACKWARDS
config CLONE_BACKWARDS2
config CLONE_BACKWARDS3
that is aggravated by the fact that some architectures such as sparc
follow the CLONE_BACKWARDSx calling convention but don't really select
the corresponding config option since they call do_fork() directly.
So do_fork() enforces a somewhat arbitrary calling convention in the
first place that doesn't really help the individual architectures that
deviate from it. They can thus simply be switched to _do_fork()
enforcing a single calling convention. (I really hope that any new
architectures will __not__ try to implement their own calling
conventions...)
Most architectures already have made a similar switch (m68k comes to
mind).
Overall this removes more code than it adds even with a good portion
of added comments. It simplifies a chunk of arch specific assembly
either by moving the code into C or by simply rewriting the assembly.
Architectures that have been touched in non-trivial ways have all been
actually boot and stress tested: sparc and ia64 have been tested with
Debian 9 images. They are the two architectures which have been
touched the most. All non-trivial changes to architectures have seen
acks from the relevant maintainers. nios2 with a custom built
buildroot image. h8300 I couldn't get something bootable to test on
but the changes have been fairly automatic and I'm sure we'll hear
people yell if I broke something there.
All other architectures that have been touched in trivial ways have
been compile tested for each single patch of the series via git rebase
-x "make ..." v5.8-rc2. arm{64} and x86{_64} have been boot tested
even though they have just been trivially touched (removal of the
HAVE_COPY_THREAD_TLS macro from their Kconfig) because well they are
basically "core architectures" and since it is trivial to get your
hands on a useable image"
* tag 'fork-v5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
arch: rename copy_thread_tls() back to copy_thread()
arch: remove HAVE_COPY_THREAD_TLS
unicore: switch to copy_thread_tls()
sh: switch to copy_thread_tls()
nds32: switch to copy_thread_tls()
microblaze: switch to copy_thread_tls()
hexagon: switch to copy_thread_tls()
c6x: switch to copy_thread_tls()
alpha: switch to copy_thread_tls()
fork: remove do_fork()
h8300: select HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
nios2: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
ia64: enable HAVE_COPY_THREAD_TLS, switch to kernel_clone_args
sparc: unconditionally enable HAVE_COPY_THREAD_TLS
sparc: share process creation helpers between sparc and sparc64
sparc64: enable HAVE_COPY_THREAD_TLS
fork: fold legacy_clone_args_valid() into _do_fork()
The trap vector is set only in trap_init which may be too late in some
cases. Early ioremap/efi spits many warning messages which may be useful.
Setup the trap vector early so that any warning/bug can be handled before
generic code invokes trap_init.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
- TASK_THREAD_SP is duplicated define
- TASK_STACK is no use at all
- Don't worry about thread_info's offset in task_struct, have
a look on comment in include/linux/sched.h:
struct task_struct {
/*
* For reasons of header soup (see current_thread_info()), this
* must be the first element of task_struct.
*/
struct thread_info thread_info;
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add jump-label implementation based on the ARM64 version
and add CONFIG_JUMP_LABEL=y to the defconfigs.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Björn Töpel <bjorn.topel@gmail.com>
Tested-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
These are needed for the __jump_table in modules using
static keys/jump-labels with the layout from
HAVE_ARCH_JUMP_LABEL_RELATIVE on 64bit kernels.
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Björn Töpel <bjorn.topel@gmail.com>
Tested-by: Björn Töpel <bjorn.topel@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The -fstack-protector & -fstack-protector-strong features are from
gcc. The patch only add basic kernel support to stack-protector
feature and some arch could have its own solution such as
ARM64_PTR_AUTH.
After enabling STACKPROTECTOR and STACKPROTECTOR_STRONG, the .text
size is expanded from 0x7de066 to 0x81fb32 (only 5%) to add canary
checking code.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add ARCH_HAS_KCOV and HAVE_GCC_PLUGINS to the riscv Kconfig.
Also disable instrumentation of some early boot code and vdso.
Boot-tested on QEMU's riscv64 virt machine.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This patch implements and enables context tracking for riscv (which is a
prerequisite for CONFIG_NO_HZ_FULL support)
It adds checking for previous state in the entry that all excepttions and
interrupts goes to and calls context_tracking_user_exit() if it comes from
user space. It also calls context_tracking_user_enter() if it will return
to user space before restore_all.
This patch is tested with the dynticks-testing testcase in
qemu-system-riscv64 virt machine and Unleashed board.
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/dynticks-testing.git
We can see the log here. The tick got mostly stopped during the execution
of the user loop.
_-----=> irqs-off
/ _----=> need-resched
| / _---=> hardirq/softirq
|| / _--=> preempt-depth
||| / delay
TASK-PID CPU# |||| TIMESTAMP FUNCTION
| | | |||| | |
<idle>-0 [001] d..2 604.183512: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=taskset next_pid=273 next_prio=120
user_loop-273 [001] d.h1 604.184788: hrtimer_expire_entry: hrtimer=000000002eda5fab function=tick_sched_timer now=604176096300
user_loop-273 [001] d.s2 604.184897: workqueue_queue_work: work struct=00000000383402c2 function=vmstat_update workqueue=00000000f36d35d4 req_cpu=1 cpu=1
user_loop-273 [001] dns2 604.185039: tick_stop: success=0 dependency=SCHED
user_loop-273 [001] dn.1 604.185103: tick_stop: success=0 dependency=SCHED
user_loop-273 [001] d..2 604.185154: sched_switch: prev_comm=taskset prev_pid=273 prev_prio=120 prev_state=R+ ==> next_comm=kworker/1:1 next_pid=46 next_prio=120
<...>-46 [001] .... 604.185194: workqueue_execute_start: work struct 00000000383402c2: function vmstat_update
<...>-46 [001] d..2 604.185266: sched_switch: prev_comm=kworker/1:1 prev_pid=46 prev_prio=120 prev_state=I ==> next_comm=taskset next_pid=273 next_prio=120
user_loop-273 [001] d.h1 604.188812: hrtimer_expire_entry: hrtimer=000000002eda5fab function=tick_sched_timer now=604180133400
user_loop-273 [001] d..1 604.189050: tick_stop: success=1 dependency=NONE
user_loop-273 [001] d..2 614.251386: sched_switch: prev_comm=user_loop prev_pid=273 prev_prio=120 prev_state=X ==> next_comm=swapper/1 next_pid=0 next_prio=120
<idle>-0 [001] d..2 614.315391: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=taskset next_pid=276 next_prio=120
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Support for arch_irq_work_raise() and arch_irq_work_has_interrupt() was
missing from riscv (a prerequisite for FULL_NOHZ).
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Lockdep is needed by proving the spinlocks and rwlocks. To suupport
it, we need fixup TRACE_IRQFLAGS_SUPPORT in kernel/entry.S. This
patch follow Documentation/irqflags-tracing.txt.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The cpu_running is not a lock-class, it lacks the dep_map member in
completion. It causes the error as follow:
arch/riscv/kernel/smpboot.c: In function '__cpu_up':
./include/linux/lockdep.h:364:52: error: 'struct completion' has no member named 'dep_map'
364 | #define lockdep_is_held(lock) lock_is_held(&(lock)->dep_map)
| ^~
./include/asm-generic/bug.h:113:25: note: in definition of macro 'WARN_ON'
113 | int __ret_warn_on = !!(condition); \
| ^~~~~~~~~
./include/linux/lockdep.h:390:27: note: in expansion of macro 'lockdep_is_held'
390 | WARN_ON(debug_locks && !lockdep_is_held(l)); \
| ^~~~~~~~~~~~~~~
arch/riscv/kernel/smpboot.c:118:2: note: in expansion of macro 'lockdep_assert_held'
118 | lockdep_assert_held(&cpu_running);
There are a lot of archs which use cpu_running in smpboot.c (arm,
arm64, openrisc, xtensa, s390, x86, mips), but none of them try
lockdep_assert_held(&cpu_running.wait.lock). So Just remove it.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Some functions are only used in the kgdb.c file. Add static properities
to these functions to avoid "no previous prototype" compile warnings
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Now that HAVE_COPY_THREAD_TLS has been removed, rename copy_thread_tls()
back simply copy_thread(). It's a simpler name, and doesn't imply that only
tls is copied here. This finishes an outstanding chunk of internal process
creation work since we've added clone3().
Cc: linux-arch@vger.kernel.org
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>A
Acked-by: Stafford Horne <shorne@gmail.com>
Acked-by: Greentime Hu <green.hu@gmail.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>A
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Store the smp_processor_id() in a local variable to save some
pointer chasing.
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add extern declarations for vDSO time-related functions to notify the
compiler these functions will be used in somewhere to avoid
"no previous prototype" compile warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The time related vDSO functions use a variable, vdso_data, to access the
vDSO data page to get the system time information. Because the vdso_data
for CFLAGS_vgettimeofday.o is an external variable defined in vdso.o,
the CFLAGS_vgettimeofday.o should be compiled with -fPIC to ensure
that vdso_data is addressable.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
This contains three fixes that I'd like to target for rc2:
* A workaround for a compiler surprise related to the "r" inline assembly that
allows LLVM to boot.
* A fix to avoid WX-only mappings, which the ISA does not allow. While this
probably manifests in many ways, the bug was found in stress-ng.
* A missing lock in set_direct_map_*(), which due to a recent lockdep change
started asserting.
-----BEGIN PGP SIGNATURE-----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=ZAlD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- a workaround for a compiler surprise related to the "r" inline
assembly that allows LLVM to boot.
- a fix to avoid WX-only mappings, which the ISA does not allow. While
this probably manifests in many ways, the bug was found in stress-ng.
- a missing lock in set_direct_map_*(), which due to a recent lockdep
change started asserting.
* tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Acquire mmap lock before invoking walk_page_range
RISC-V: Don't allow write+exec only page mapping request in mmap
riscv/atomic: Fix sign extension for RV64I
As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the
RISC-V instruction set manual[0], the PTE permission bit combination of
"write+exec only" is reserved for future use. Hence, don't allow such
mapping request in mmap call.
An issue is been reported by David Abdurachmanov, that while running
stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V
specific kernel.
This issue arises when the stress-sysbadaddr request for pages with
"write+exec only" permission bits and then passes the address obtain
from this mmap call to various system call. For the riscv kernel, the
mmap call should fail for this particular combination of permission bits
since it's not valid.
[0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf
Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
[Palmer: Refer to the latest ISA specification at the only link I could
find, and update the terminology.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Better describe what this helper does, and match the naming of
copy_from_kernel_nofault.
Also switch the argument order around, so that it acts and looks
like get_user().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Select statements are now sorted alphanumerically.
* Our first-level interrupts are now handled via a full irqchip driver.
* CPU hotplug is fixed.
* Our vDSO calls now use the common vDSO infrastructure.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl7hq3QTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiRcXD/9dEmZ/UgKNGE1BYlQoLbS4o3u4dt6K
aZkl4AvadpgxlmCl5OAqv/8+UIsMmzhJ4y8bQL1FOdPhRQfModFlQFwzDiUbPguU
Fgh+wXF+/iDywtfA2fVm7OaMBKpftzTBF+YKRsZHdrUF1l3es9f99mxfelcZWx2h
nMrOdKFjmEeqhPlkF17Wr30elKGO7NqT3caBam9X/do1bgGnJ9sLfehr4b7dXdzk
QWm6cp8xmSM7A2jKUT8l7WKmZn3a8DDTDws/yKDuFr+2UxfXspPtc+XzN36zRSAd
DkL3Zwp+egld4y43019BaK2yY4sQ59HzJYRD+4Z0BiRltBs2gexVqkFy2k8kGemh
X4kLe2opNQdsh9tcAM+s2VnBuwuiKPXc6AtNXaQKzeuZ6286axweYlCcYufTgzXP
oEu1haDMjsZz9/mXNiQhvGIPMU/obXSRdJYvryhIwpDOqR3cvbpeQTtC/16raNwd
OjE0qFE7AtI9pa7+oCQPfcJurjm6cPkv25b+L2SQ+dW9WkE6QzIP5ynMuxdhxg2m
OxKbuV0mZ3MgbdK+nEc72gUtbUjdb3t/1a9GwoNNLW78eKER3uXl4vxAyIqSKgf7
RViL0/CzEPqU97S/3qVPC27KhsBbqvXwM7gE1MVnm1HiEUiKnlZkLjzFqkorLUMz
emv+mW+kdjZ1aQ==
=FQnf
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
- Kconfig select statements are now sorted alphanumerically
- first-level interrupts are now handled via a full irqchip driver
- CPU hotplug is fixed
- vDSO calls now use the common vDSO infrastructure
* tag 'riscv-for-linus-5.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: set the permission of vdso_data to read-only
riscv: use vDSO common flow to reduce the latency of the time-related functions
riscv: fix build warning of missing prototypes
RISC-V: Don't mark init section as non-executable
RISC-V: Force select RISCV_INTC for CONFIG_RISCV
RISC-V: Remove do_IRQ() function
clocksource/drivers/timer-riscv: Use per-CPU timer interrupt
irqchip: RISC-V per-HART local interrupt controller driver
RISC-V: Rename and move plic_find_hart_id() to arch directory
RISC-V: self-contained IPI handling routine
RISC-V: Sort select statements alphanumerically
The original vdso_data page is empty, so the permission of the vdso_data
page can be the same with the vdso text page. After introducing the vDSO
common flow, the vdso_data is not empty and the permission should be
changed to read-only.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Even if RISC-V has supported the vDSO feature, the latency of the functions
for obtaining the system time is still expensive. It is because these
functions still trigger a corresponding system call in the process, which
slows down the response time. If we want to remove the system call to
reduce the latency, the kernel should have the ability to output the system
clock information to userspace. This patch introduces the vDSO common flow
to enable the kernel to achieve the above feature and uses "rdtime"
instruction to obtain the current time in the user space. Under this
condition, the latency cost by the ecall from U-mode to S-mode can be
eliminated. After applying this patch, the latency of gettimeofday()
measured on the HiFive unleashed board can be reduced by %61.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Add the missing header in file, it was lost in original implementation.
The warning message as follows:
- no previous prototype for 'patch_text_nosync' [-Wmissing-prototypes]
- no previous prototype for 'patch_text' [-Wmissing-prototypes]
Changed in v2:
- Correct the typo of commit message.
Signed-off-by: Zong Li <zong.li@sifive.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The only thing do_IRQ() does is call handle_arch_irq function
pointer. We can very well call handle_arch_irq function pointer
directly from assembly and remove do_IRQ() function hence this
patch.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The RISC-V per-HART local interrupt controller manages software
interrupts, timer interrupts, external interrupts (which are routed
via the platform level interrupt controller) and other per-HART
local interrupts.
We add a driver for the RISC-V local interrupt controller, which
eventually replaces the RISC-V architecture code, allowing for a
better split between arch code and drivers.
The driver is compliant with RISC-V Hart-Level Interrupt Controller
DT bindings located at:
Documentation/devicetree/bindings/interrupt-controller/riscv,cpu-intc.txt
Co-developed-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
[Palmer: Cleaned up warnings]
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
The plic_find_hart_id() can be useful to other interrupt controller
drivers (such as RISC-V local interrupt driver) so we rename this
function to riscv_of_parent_hartid() and place it in arch directory
along with riscv_of_processor_hartid().
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, the IPI handling routine riscv_software_interrupt() does
not take any argument and also does not perform irq_enter()/irq_exit().
This patch makes IPI handling routine more self-contained by:
1. Passing "pt_regs *" argument
2. Explicitly doing irq_enter()/irq_exit()
3. Explicitly save/restore "pt_regs *" using set_irq_regs()
With above changes, IPI handling routine does not depend on caller
function to perform irq_enter()/irq_exit() and save/restore of
"pt_regs *" hence its more self-contained. This also enables us
to call IPI handling routine from IRQCHIP drivers.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.
Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: consolidate definitions of page table accessors", v2.
The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once. For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.
Most of these definitions are actually identical and typically it boils
down to, e.g.
static inline unsigned long pmd_index(unsigned long address)
{
return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}
static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}
These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.
For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.
These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.
This patch (of 12):
The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g. pte_alloc() and
pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.
The include statements in such cases are remove with a simple loop:
for f in $(git grep -l "include <linux/mm.h>") ; do
sed -i -e '/include <asm\/pgtable.h>/ d' $f
done
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, the log-level of show_stack() depends on a platform
realization. It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).
Furthermore, it forces the logic decision from user to an architecture
side. In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages. And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.
Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers. Also, it will consolidate
printings with headers.
Introduce show_stack_loglvl(), that eventually will substitute
show_stack().
[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Link: http://lkml.kernel.org/r/20200418201944.482088-28-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
