Intended for upstream testing so that we can still exercise the LMEM
plumbing and !i915_ggtt_has_aperture paths. Smoke tested on Skull Canyon
device. This works by allocating an intel_memory_region for a reserved
portion of system memory, which we treat like LMEM. For the LMEMBAR we
steal the aperture and 1:1 it map to the stolen region.
To enable simply set the i915 modparam fake_lmem_start= on the kernel
cmdline with the start of reserved region(see memmap=). The size of the
region we can use is determined by the size of the mappable aperture, so
the size of reserved region should be >= mappable_end. For now we only
enable for the selftests. Depends on CONFIG_DRM_I915_UNSTABLE being
enabled.
eg. memmap=2G$16G i915.fake_lmem_start=0x400000000
v2: make fake_lmem_start an i915 modparam
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030173320.8850-1-matthew.auld@intel.com
Commit f2db53f14d ("drm/i915: Replace "_load" with "_probe"
consequently") deliberately left the name of the module parameter
unchanged as that would require a corresponding change on IGT size.
Now as the IGT side change has been submitted, complete the switch to
the "probe" nomenclature.
Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Michał Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Tomasz Lis <tomasz.lis@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20191029102036.6326-3-janusz.krzysztofik@linux.intel.com
If the preempted context takes too long to relinquish control, e.g. it
is stuck inside a shader with arbitration disabled, evict that context
with an engine reset. This ensures that preemptions are reasonably
responsive, providing a tighter QoS for the more important context at
the cost of flagging unresponsive contexts more frequently (i.e. instead
of using an ~10s hangcheck, we now evict at ~100ms). The challenge of
lies in picking a timeout that can be reasonably serviced by HW for
typical workloads, balancing the existing clients against the needs for
responsiveness.
Note that coupled with timeslicing, this will lead to rapid GPU "hang"
detection with multiple active contexts vying for GPU time.
The forced preemption mechanism can be compiled out with
./scripts/config --set-val DRM_I915_PREEMPT_TIMEOUT 0
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191023133108.21401-2-chris@chris-wilson.co.uk
This reverts commit f774f09649.
If GuC firmware is not present on the filesystem driver crashes the
machine on boot.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: f774f09649 ("drm/i915/guc: Turn on GuC/HuC auto mode")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190719094845.6242-2-tvrtko.ursulin@linux.intel.com
Using "enable_guc" modparam auto mode (-1) will let driver
decide on which platforms and in which configuration we want
to use GuC/HuC firmwares.
Today driver will enable HuC firmware authentication by GuC
only on Gen11+ platforms as HuC firmware is required to unlock
advanced video codecs in media driver.
Legacy platforms with GuC/HuC are not affected by this change
as for them driver still defaults to disabled(0) in auto mode.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712111445.21040-3-michal.wajdeczko@intel.com
If LFP backlight type setting from VBT was "VESA eDP AUX Interface".
Driver should check panel capability and try to initialize aux backlight.
No matter i915_modparams.enable_dpcd_backlight was enabled or not.
v2: access dev_priv->vbt.backlight.type directly and remove unused function.
v3: 1. Modify i915.enable_dpcd_backlight type from bool to int and give default
value as 0 (disable).
2. Add a judgement to check LFP backlight type was aux interface or not.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1561045456-12171-1-git-send-email-shawn.c.lee@intel.com
The i915.alpha_support module parameter has caused some confusion along
the way. Add new i915.force_probe parameter to specify PCI IDs of
devices to probe, when the devices are recognized but not automatically
probed by the driver. The name is intended to reflect what the parameter
effectively does, avoiding any overloaded semantics of "alpha" and
"support".
The parameter supports "" to disable, "<pci-id>,[<pci-id>,...]" to
enable force probe for one or more devices, and "*" to enable force
probe for all known devices.
Also add new CONFIG_DRM_I915_FORCE_PROBE config option to replace the
DRM_I915_ALPHA_SUPPORT option. This defaults to "*" if
DRM_I915_ALPHA_SUPPORT=y.
Instead of replacing i915.alpha_support immediately, let the two coexist
for a while, with a deprecation message, for a transition period.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506134801.28751-1-jani.nikula@intel.com
The normal behaviour is to periodically check for a mmio access error,
and once detected enable mmio access checking. However this is useless
if the error only occurs once during module load, and so we may miss
such errors in CI. To allow ourselves to catch them, allow CI to opt into
always enabling mmio debugging.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530121311.6794-1-chris@chris-wilson.co.uk
We really want to have fastboot enabled by default to avoid an ugly
modeset during boot.
Rather then enabling it everywhere, lets start with enabling it on
Skylake and newer.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190124130114.3967-1-maarten.lankhorst@linux.intel.com
Now that we are confident in providing full-ppgtt where supported,
remove the ability to override the context isolation.
v2: Remove faked aliasing-ppgtt for testing as it no longer is accepted.
v3: s/USES/HAS/ to match usage and reject attempts to load the module on
old GVT-g setups that do not provide support for full-ppgtt.
v4: Insulate ABI ppGTT values from our internal enum (later plans
involve moving ppGTT depth out of the enum, thus potentially breaking
ABI unless we document the current values).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Zhi Wang <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926201222.5643-1-chris@chris-wilson.co.uk
The command parser is feature complete, stable and required by
userspace. In commit 41736a8e33 ("drm/i915: Use the precomputed value
for whether to enable command parsing") I accidentally removed control
from the modparam, and as no one has complained, remove the left
over modparam completely!
References: 41736a8e33 ("drm/i915: Use the precomputed value for whether to enable command parsing")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180517150727.10431-1-chris@chris-wilson.co.uk
Use i915.dmc_firmware_path to override default firmware for the platform
and bypassing version checks.
v2: add missing param struct member declaration (David)
Tested-by: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180424122016.2416-1-jani.nikula@intel.com
Now that we've decoupled logging from relay, GuC log level is only
controlling the GuC behavior - there shouldn't be any impact on i915
behaviour. We're only going to see a single extra interrupt when log
will get half full.
That, and the fact that we're seeing igt/gem_exec_nop/basic-series
failing with non-verbose logging being disabled.
v2: Bring back the "auto" guc_log_level, now that we fixed the log
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180319095348.9716-11-michal.winiarski@intel.com
It looks that GuC log functionality is not fully functional yet and
causes issues when enabled by auto(-1) modparam on debug builds.
For example, but not limited to:
[ 30.062893] ======================================================
[ 30.062894] WARNING: possible circular locking dependency detected
[ 30.062895] 4.15.0-rc8-CI-CI_DRM_3648+ #1 Tainted: G U
[ 30.062896] ------------------------------------------------------
[ 30.062897] debugfs_test/1268 is trying to acquire lock:
[ 30.062898] (&dev->struct_mutex){+.+.}, at: [<00000000e4213449>] i915_mutex_lock_interruptible+0x47/0x130 [i915]
[ 30.062921]
but task is already holding lock:
[ 30.062921] (&mm->mmap_sem){++++}, at: [<00000000dd7adc93>] __do_page_fault+0x106/0x560
[ 30.062924]
which lock already depends on the new lock.
References: 0ed8795353 ("drm/i915/guc: Redefine guc_log_level modparam values")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104693
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104694
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104695
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Saarinen <jani.saarinen@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Cc: Marta Lofstedt <marta.lofstedt@intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180119124926.29844-1-michal.wajdeczko@intel.com
Reviewed-by: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
We dump modparams in few places (debugfs, gpu_error) using different
functions. Lets add reusable function to avoid code duplication.
add/remove: 1/0 grow/shrink: 0/2 up/down: 1096/-2339 (-1243)
Function old new delta
i915_params_dump - 1096 +1096
i915_capabilities 1353 185 -1168
i915_error_state_to_str 5507 4336 -1171
Total: Before=1285716, After=1284473, chg -0.10%
v2: use forward decl rather than include (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171219114346.26308-3-michal.wajdeczko@intel.com
We currently have two module parameters that control GuC:
"enable_guc_loading" and "enable_guc_submission". Whenever
we need submission=1, we also need loading=1. We also need
loading=1 when we want to want to load and verify the HuC.
Lets combine above module parameters into one "enable_guc"
modparam. New supported bit values are:
0=disable GuC (no GuC submission, no HuC)
1=enable GuC submission
2=enable HuC load
Special value "-1" can be used to let driver decide what
option should be enabled for given platform based on
hardware/firmware availability or preference.
Explicit enabling any of the GuC features makes GuC load
a required step, fallback to non-GuC mode will not be
supported.
v2: Don't use -EIO
v3: define modparam bits (Chris)
v4: rely on implicit cast (Chris)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Sujaritha Sundaresan <sujaritha.sundaresan@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-6-michal.wajdeczko@intel.com
It has been many years since the last confirmed sighting (and fix) of an
RC6 related bug (usually a system hang). Remove the parameter to stop
users from setting dangerous values, as they often set it during triage
and end up disabling the entire runtime pm instead (the option is not a
fine scalpel!).
Furthermore, it allows users to set known dangerous values which were
intended for testing and not for production use. For testing, we can
always patch in the required setting without having to expose ourselves
to random abuse.
v2: Fixup NEEDS_WaRsDisableCoarsePowerGating fumble, and document the
lack of ilk support better.
v3: Clear intel_info->rc6p if we don't support rc6 itself.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171201113030.18360-1-chris@chris-wilson.co.uk
Having disabled the broken semaphores on Sandybridge, there is no need
for a modparam any more, so remove it in favour of a simple
HAS_LEGACY_SEMAPHORES() guard.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-5-chris@chris-wilson.co.uk
Execlists and legacy ringbuffer submission are no longer feature
comparable (execlists now offer greater functionality that should
overcome their performance hit) and obsoletes the unsafe module
parameter, i.e. comparing the two modes of execution is no longer
useful, so remove the debug tool.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> #i915_perf.c
Link: https://patchwork.freedesktop.org/patch/msgid/20171120205504.21892-1-chris@chris-wilson.co.uk
This has been unused since commit afa8ce5b30
("drm/i915: Nuke legacy flip queueing code").
Changes since v1:
- Rebase on top of all the changes to modparams.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
\o/-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004094416.31306-1-maarten.lankhorst@linux.intel.com
Members should be initialized with values of matching types.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925105008.46060-3-michal.wajdeczko@intel.com
By combining default value into helper macro we can initialize
modparams struct in the same automatic way as it was declared.
This will initialize members in the same order as declared
and additionally will disallow declaring new member without
proper default value for it.
v2: make MEMBER macro more robust (Joonas)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925105008.46060-2-michal.wajdeczko@intel.com
We should not add trailing ; after each member to allow other
than statements-style uses of this helper macro.
While here s/func/param for clarity.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170925105008.46060-1-michal.wajdeczko@intel.com
Our global struct with params is named exactly the same way
as new preferred name for the drm_i915_private function parameter.
To avoid such name reuse lets use different name for the global.
v5: pure rename
v6: fix
Credits-to: Coccinelle
@@
identifier n;
@@
(
- i915.n
+ i915_modparams.n
)
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Ville Syrjala <ville.syrjala@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919193846.38060-1-michal.wajdeczko@intel.com
Sometimes it would be most enlightening to debug systems by replacing
the VBT to be used. For example, in the referenced bug the BIOS provides
different VBT depending on the boot mode (UEFI vs. legacy). It would be
interesting to try the failing boot mode with the VBT from the working
boot, and see if that makes a difference.
Add a module parameter to load the VBT using the firmware loader, not
unlike the EDID firmware mechanism.
As a starting point for experimenting, one can pick up the BIOS provided
VBT from /sys/kernel/debug/dri/0/i915_opregion/i915_vbt.
v2: clarify firmware load return value check (Bob)
v3: kfree the loaded firmware blob
References: https://bugs.freedesktop.org/show_bug.cgi?id=97822#c83
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170817115209.25912-1-jani.nikula@intel.com
This patch adds option to enable dynamic backlight for eDP
panel that supports this feature via DPCD register and
set minimum / maximum brightness to 0% and 100% of the
normal brightness.
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622190339.142671-4-puthik@chromium.org
Add heuristic to decide that AUX or PWM pin should use for
backlight brightness adjustment and modify i915 param description
to have auto, force disable, and force enable.
The heuristic to determine that using AUX pin is better than using
PWM pin is that the panel support any of the feature list here.
- Regional backlight brightness adjustment
- Backlight PWM frequency set
- More than 8 bits resolution of brightness level
- Backlight enablement via AUX and not by BL_ENABLE pin
Signed-off-by: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170622190339.142671-3-puthik@chromium.org
`guc_firmware_path` and `huc_firmware_path` module parameters are added.
Using the parameter disables version checks and loads desired firmware
instead of the default one.
v2: make params unsafe && notice about disabled fw check (J. Lahtinen)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The alpha_support module option can only take one of two values, so
assign it to a boolean type. The only advantage is in pretty printing
via /sys/module/i915/parameters/alpha_support and elsewhere.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-2-chris@chris-wilson.co.uk
I want to print the struct from the error state and so would like to use
the existing struct definition as the template ala DEV_INFO*
v2: Use MEMBER() rather than p().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-1-chris@chris-wilson.co.uk
As i915.enable_cmd_parser is an unsafe option, make it read-only at
runtime. Now that it is constant, we can use the value determined during
initialisation as to whether we need the cmdparser at execbuffer time.
v2: Remove the inline for its single user, it is clear enough (and
shorter) without!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161124125851.6615-1-chris@chris-wilson.co.uk
The term "preliminary hardware support" has always caused confusion both
among users and developers. It has always been about preliminary driver
support for new hardware, and not so much about preliminary hardware. Of
course, initially both the software and hardware are in early stages,
but the distinction becomes more clear when the user picks up production
hardware and an older kernel to go with it, with just the early support
we had for the hardware at the time the kernel was released. The user
has to specifically enable the alpha quality *driver* support for the
hardware in that specific kernel version.
Rename preliminary_hw_support to alpha_support to emphasize that the
module parameter, config option, and flag are about software, not about
hardware. Improve the language in help texts and debug logging as well.
This appears to be a good time to do the change, as there are currently
no platforms with preliminary^W alpha support.
Cc: Rob Clark <robdclark@gmail.com>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com
We currently capture the GPU state after we detect a hang. This is vital
for us to both triage and debug hangs in the wild (post-mortem
debugging). However, it comes at the cost of running some potentially
dangerous code (since it has to make very few assumption about the state
of the driver) that is quite resource intensive.
This patch introduces both a method to disable error capture at runtime
(for users who hit bugs at runtime and need a workaround) and to disable
error capture at compiletime (for realtime users who want to minimise
any possible latency, and never require error capture, saving ~30k of
code). The cost is that we now have to be wary of (and test!) a kconfig
flag and a module parameter. The effect of the module parameter is easy
to verify through code inspection and runtime testing, but a kconfig flag
needs regular compile checking.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch
Link: http://patchwork.freedesktop.org/patch/msgid/20161012090522.367-2-chris@chris-wilson.co.uk
Add force_reset_modeset_test as a parameter to force the modeset path during gpu reset.
This allows a IGT test to set the knob and trigger a hang to force the gpu reset,
even on platforms that wouldn't otherwise require it.
Changes since v1:
- Split out fix to separate commit.
Changes since v2:
- This commit is purely about force_reset_modeset_test now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Testcase: drv_hangman.reset-with-forced-modeset
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-3-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
This patch introduces the very basic framework of GVT-g device model,
includes basic prototypes, definitions, initialization.
v12:
- Call intel_gvt_init() in driver early initialization stage. (Chris)
v8:
- Remove the GVT idr and mutex in intel_gvt_host. (Joonas)
v7:
- Refine the URL link in Kconfig. (Joonas)
- Refine the introduction of GVT-g host support in Kconfig. (Joonas)
- Remove the macro GVT_ALIGN(), use round_down() instead. (Joonas)
- Make "struct intel_gvt" a data member in struct drm_i915_private.(Joonas)
- Remove {alloc, free}_gvt_device()
- Rename intel_gvt_{create, destroy}_gvt_device()
- Expost intel_gvt_init_host()
- Remove the dummy "struct intel_gvt" declaration in intel_gvt.h (Joonas)
v6:
- Refine introduction in Kconfig. (Chris)
- The exposed API functions will take struct intel_gvt * instead of
void *. (Chris/Tvrtko)
- Remove most memebers of strct intel_gvt_device_info. Will add them
in the device model patches.(Chris)
- Remove gvt_info() and gvt_err() in debug.h. (Chris)
- Move GVT kernel parameter into i915_params. (Chris)
- Remove include/drm/i915_gvt.h, as GVT-g will be built within i915.
- Remove the redundant struct i915_gvt *, as the functions in i915
will directly take struct intel_gvt *.
- Add more comments for reviewer.
v5:
Take Tvrtko's comments:
- Fix the misspelled words in Kconfig
- Let functions take drm_i915_private * instead of struct drm_device *
- Remove redundant prints/local varible initialization
v3:
Take Joonas' comments:
- Change file name i915_gvt.* to intel_gvt.*
- Move GVT kernel parameter into intel_gvt.c
- Remove redundant debug macros
- Change error handling style
- Add introductions for some stub functions
- Introduce drm/i915_gvt.h.
Take Kevin's comments:
- Move GVT-g host/guest check into intel_vgt_balloon in i915_gem_gtt.c
v2:
- Introduce i915_gvt.c.
It's necessary to introduce the stubs between i915 driver and GVT-g host,
as GVT-g components is configurable in kernel config. When disabled, the
stubs here do nothing.
Take Joonas' comments:
- Replace boolean return value with int.
- Replace customized info/warn/debug macros with DRM macros.
- Document all non-static functions like i915.
- Remove empty and unused functions.
- Replace magic number with marcos.
- Set GVT-g in kernel config to "n" by default.
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-5-git-send-email-zhi.a.wang@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
This reverts the following patches:
d55dbd06bb drm/i915: Allow nonblocking update of pageflips.
15c86bdb76 drm/i915: Check for unpin correctness.
95c2ccdc82 Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates"
a6747b7304 drm/i915: Make unpin async.
03f476e1fc drm/i915: Prepare connectors for nonblocking checks.
2099deffef drm/i915: Pass atomic states to fbc update functions.
ee7171af72 drm/i915: Remove reset_counter from intel_crtc.
2ee004f7c5 drm/i915: Remove queue_flip pointer.
b8d2afae55 drm/i915: Remove use_mmio_flip kernel parameter.
8dd634d922 drm/i915: Remove cs based page flip support.
143f73b3bf drm/i915: Rework intel_crtc_page_flip to be almost atomic, v3.
84fc494b64 drm/i915: Add the exclusive fence to plane_state.
6885843ae1 drm/i915: Convert flip_work to a list.
aa420ddd8e drm/i915: Allow mmio updates on all platforms, v2.
afee4d8707 Revert "drm/i915: Avoid stalling on pending flips for legacy cursor updates"
"drm/i915: Allow nonblocking update of pageflips" should have been
split up, misses a proper commit message and seems to cause issues in
the legacy page_flip path as demonstrated by kms_flip.
"drm/i915: Make unpin async" doesn't handle the unthrottled cursor
updates correctly, leading to an apparent pin count leak. This is
caught by the WARN_ON in i915_gem_object_do_pin which screams if we
have more than DRM_I915_GEM_OBJECT_MAX_PIN_COUNT pins.
Unfortuantely we can't just revert these two because this patch series
came with a built-in bisect breakage in the form of temporarily
removing the unthrottled cursor update hack for legacy cursor ioctl.
Therefore there's no other option than to revert the entire pile :(
There's one tiny conflict in intel_drv.h due to other patches, nothing
serious.
Normally I'd wait a bit longer with doing a maintainer revert, but
since the minimal set of patches we need to revert (due to the bisect
breakage) is so big, time is running out fast. And very soon
(especially after a few attempts at fixing issues) it'll be really
hard to revert things cleanly.
Lessons learned:
- Not a good idea to rush the review (done by someone fairly new to
the area) and not make sure domain experts had a chance to read it.
- Patches should be properly split up. I only looked at the two
patches that should be reverted in detail, but both look like the
mix up different things in one patch.
- Patches really should have proper commit messages. Especially when
doing more than one thing, and especially when touching critical and
tricky core code.
- Building a patch series and r-b stamping it when it has a built-in
bisect breakage is not a good idea.
- I also think we need to stop building up technical debt by
postponing atomic igt testcases even longer. I think it's clear that
there's enough corner cases in this beast that we really need to
have the testcases _before_ the next step lands.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Acked-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Split the function of "enable_guc_submission" into two separate
options. The new one ("enable_guc_loading") controls only the
*fetching and loading* of the GuC firmware image. The existing
one is redefined to control only the *use* of the GuC for batch
submission once the firmware is loaded.
In addition, the degree of control has been refined from a simple
bool to an integer key, allowing several options:
-1 (default) whatever the platform default is
0 DISABLE don't load/use the GuC
1 BEST EFFORT try to load/use the GuC, fallback if not available
2 REQUIRE must load/use the GuC, else leave the GPU wedged
The new platform default (as coded here) will be to attempt to
load the GuC iff the device has a GuC that requires firmware,
but not yet to use it for submission. A later patch will change
to enable it if appropriate.
v4:
Changed some error-message levels, mostly ERROR->INFO, per
review comments by Tvrtko Ursulin.
v5:
Dropped one more error message, disabled GuC submission on
hypothetical firmware-free devices [Tvrtko Ursulin].
v6:
Logging tidy by Tvrtko Ursulin:
* Do not log falling back to execlists when wedging the GPU.
* Do not log fw load errors when load was disabled by user.
* Pass down some error code from fw load for log message to
make more sense.
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com>
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nick Hoath <nicholas.hoath@intel.com> (v6)
This patch adds support for eDP backlight control using DPCD registers to
backlight hooks in intel_panel.
It checks for backlight control over AUX channel capability and sets up
function pointers to get and set the backlight brightness level if
supported.
v2: Moved backlight functions from intel_dp.c into a new file
intel_dp_aux_backlight.c. Also moved reading of eDP display control
registers to intel_dp_get_dpcd
v3: Correct some formatting mistakes
v4: Updated to use AUX backlight control if PWM control is not possible
(Jani)
v5: Moved call to initialize backlight registers to dp_aux_setup_backlight
v6: Check DP_EDP_BACKLIGHT_PIN_ENABLE_CAP is disabled before setting up AUX
backlight control. To fix BLM_PWM_ENABLE igt test warnings on bdw_ultra
v7: Add enable_dpcd_backlight module parameter.
v8: Rebase onto latest drm-intel-nightly branch
v9: Remove changes to intel_dp_dpcd_read_wake
Split addition edp_dpcd variable into a separate patch
Cc: Bob Paauwe <bob.j.paauwe@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Yetunde Adebisi <yetundex.adebisi@intel.com>
[Jani: whitepace changes to appease checkpatch]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-4-git-send-email-yetundex.adebisi@intel.com
Add support for forcing an error at selected places in the driver. As an
example add 4 options to fail during driver loading.
Requested by Chris.
v2:
- Add fault point for modeset initialization
- Print debug message when injecting an error
v3:
- Rename inject_fault to inject_load_failure, rename the related macros
and helper accordingly (Chris)
- Use a counter instead of a mask to identify the failure point (Daniel)
- Mark the module option as _unsafe and keep i915_params ordered (Joonas)
v4:
- Rebase on latest -nightly
v5:
- Use DRM_INFO instead of DRM_DEBUG_DRIVER, making it clearer in CI reports
that a following error message is expected (IRC r-b from Chris on v5)
CC: Chris Wilson <chris@chris-wilson.co.uk>
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915
drm driver: "enable_dp_mst", which is enabled by default. Disabling the
parameter forces newly connected DisplayPort sinks to report as not
supporting multi-stream transport (MST), thus "forcing" the use of
single-stream transport (SST).
v2: rename parameter to conform to style
v3: add signoff
Signed-off-by: Nathan Schulte <nmschulte@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com
