Setting an alt_speed using the ASYNC_SPD flags has been deprecated since
v2.1.69, and has been broken since v3.10 and commit 6865ff222c ("TTY:
do not warn about setting speed via SPD_*") without anyone noticing.
Drop the broken alt-speed handling altogether, and add a ratelimited
warning about using TIOCCSERIAL to to change speed as being deprecated.
Note that using ASYNC_SPD_CUST is still supported.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Setting an alt_speed using the ASYNC_SPD flags has been deprecated since
v2.1.69, and has been broken since v3.10 and commit 6865ff222c ("TTY:
do not warn about setting speed via SPD_*") without anyone noticing.
Drop the broken alt-speed handling altogether, and add a ratelimited
warning about using TIOCCSERIAL to change speed as being deprecated.
Note that using ASYNC_SPD_CUST is still supported.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver was setting the deprecated and broken alt_speed based on port
flags, but never provided a means to change the flags or to actually
change the speed.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the broken alt_speed code, and warn when trying to set the line
speed using TIOCSSERIAL and SPD flags.
The use of SPD flags to set the line speed has been deprecated since
v2.1.69 and support for alt_speed (e.g. "warp") has even been removed
from TTY core in v3.10 by commit 6865ff222c ("TTY: do not warn about
setting speed via SPD_*"), effectively breaking all driver
implementations of this except for serial core.
Also remove the verbose and outdated comment on how to set baud rates.
Note that setting a custom divisor will continue to work with the
caveat that 38400 must again be selected every time the divisor is
changed since v2.6.24 and commit 669a6db103 ("USB: ftd_sio: cleanups
and updates for new termios work") which started reporting back the
actual baud rate used.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Contrary to what a comment claimed, the ASYNC_SPD flags and custom
divisor can be set by a non-privileged user so rate limit the
deprecation notice as was intended.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When opening the slave end of a PTY, it is not possible for userspace to
safely ensure that /dev/pts/$num is actually a slave (in cases where the
mount namespace in which devpts was mounted is controlled by an
untrusted process). In addition, there are several unresolvable
race conditions if userspace were to attempt to detect attacks through
stat(2) and other similar methods [in addition it is not clear how
userspace could detect attacks involving FUSE].
Resolve this by providing an interface for userpace to safely open the
"peer" end of a PTY file descriptor by using the dentry cached by
devpts. Since it is not possible to have an open master PTY without
having its slave exposed in /dev/pts this interface is safe. This
interface currently does not provide a way to get the master pty (since
it is not clear whether such an interface is safe or even useful).
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Valentin Rothberg <vrothberg@suse.com>
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to avoid future diversions between fs/compat_ioctl.c and
drivers/tty/pty.c, define .compat_ioctl callbacks for the relevant
tty_operations structs. Since both pty_unix98_ioctl() and
pty_bsd_ioctl() are compatible between 32-bit and 64-bit userspace no
special translation is required.
Signed-off-by: Aleksa Sarai <asarai@suse.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commtech adapters apparently need the original setting as outputs, see
https://marc.info/?l=linux-gpio&m=149557425201323&w=2. Account for that.
Fixes: 7dea8165f1 ("serial: exar: Preconfigure xr17v35x MPIOs as output")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
AVR32 is gone. Now it's time to clean up the driver by removing
leftovers that was used by AVR32 related code.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only vgacon and sisusbcon did it right, the rest (via generic code) tried
underline (usually cyan).
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Again, a nice linear transfer that simplifies the code.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A nice big linear transfer, no need to flip stac/PAN/etc every half-entry.
Also, yay __put_user() after checking only read.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Only read access is checked before this call.
Actually, at the moment this is not an issue, as every in-tree arch does
the same manual checks for VERIFY_READ vs VERIFY_WRITE, relying on the MMU
to tell them apart, but this wasn't the case in the past and may happen
again on some odd arch in the future.
If anyone cares about 3.7 and earlier, this is a security hole (untested)
on real 80386 CPUs.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
CC: stable@vger.kernel.org # v3.7-
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus wants to get rid of these functions, and these uses are especially
egregious: they copy a big linear array element by element.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want the tty locking fix in here, so that maybe we can finally get it
fixed for real...
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes a problem with reading files larger than 2GB from a UFS-2
file system:
https://bugzilla.kernel.org/show_bug.cgi?id=195721
The incorrect UFS s_maxsize limit became a problem as of commit
c2a9737f45 ("vfs,mm: fix a dead loop in truncate_inode_pages_range()")
which started using s_maxbytes to avoid a page index overflow in
do_generic_file_read().
That caused files to be truncated on UFS-2 file systems because the
default maximum file size is 2GB (MAX_NON_LFS) and UFS didn't update it.
Here I simply increase the default to a common value used by other file
systems.
Signed-off-by: Richard Narron <comet.berkeley@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will B <will.brokenbourgh2877@gmail.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: <stable@vger.kernel.org> # v4.9 and backports of c2a9737f45
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Bugfixes include:
- Fix a typo in commit e092693443 that breaks copy offload
- Fix the connect error propagation in xs_tcp_setup_socket()
- Fix a lock leak in nfs40_walk_client_list
- Verify that pNFS requests lie within the offset range of the layout segment.
-----BEGIN PGP SIGNATURE-----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=P2bm
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Bugfixes include:
- Fix a typo in commit e092693443 ("NFS append COMMIT after
synchronous COPY") that breaks copy offload
- Fix the connect error propagation in xs_tcp_setup_socket()
- Fix a lock leak in nfs40_walk_client_list
- Verify that pNFS requests lie within the offset range of the layout
segment"
* tag 'nfs-for-4.12-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
nfs: Mark unnecessarily extern functions as static
SUNRPC: ensure correct error is reported by xs_tcp_setup_socket()
NFSv4.0: Fix a lock leak in nfs40_walk_client_list
pnfs: Fix the check for requests in range of layout segment
xprtrdma: Delete an error message for a failed memory allocation in xprt_rdma_bc_setup()
pNFS/flexfiles: missing error code in ff_layout_alloc_lseg()
NFS fix COMMIT after COPY
Here is a single tty core fix for 4.12-rc4. It reverts a patch that a
lot of people reported as causing lockdep and other warnings. Right
after I reverted this in my tree, it seems like another "correct" fix
might have shown up, but it's too late in the release cycle to be
messing with tty core locking, so let's just revert this for now to go
back how things always have been and try it again for 4.13.
This has not been in linux-next as I only reverted it a few hours ago.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWTQplQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymn+ACgi83/vya8tSJ+J7rWBf8n2Nma3VkAoI/5lT8H
gQJub5tZhfB3o7zZrMp4
=bpSk
-----END PGP SIGNATURE-----
Merge tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single tty core fix for 4.12-rc4. It reverts a patch that a
lot of people reported as causing lockdep and other warnings.
Right after I reverted this in my tree, it seems like another
"correct" fix might have shown up, but it's too late in the release
cycle to be messing with tty core locking, so let's just revert this
for now to go back how things always have been and try it again for
4.13.
This has not been in linux-next as I only reverted it a few hours ago"
* tag 'tty-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: fix port buffer locking"
Pull input subsystem fixes from Dmitry Torokhov:
- a couple of regression fixes in synaptics and axp20x-pek drivers
- try to ease transition from PS/2 to RMI for Synaptics touchpad users
by ensuring we do not try to activate RMI mode when RMI SMBus support
is not enabled, and nag users a bit to enable it
- plus a couple of other changes that seemed worthwhile for this
release
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: axp20x-pek - switch to acpi_dev_present and check for ACPI0011 too
Input: axp20x-pek - only check for "INTCFD9" ACPI device on Cherry Trail
Input: tm2-touchkey - use LEN_ON as boolean value instead of LED_FULL
Input: synaptics - tell users to report when they should be using rmi-smbus
Input: synaptics - warn the users when there is a better mode
Input: synaptics - keep PS/2 around when RMI4_SMB is not enabled
Input: synaptics - clear device info before filling in
Input: silead - disable interrupt during suspend
Change the mailing list address
-----BEGIN PGP SIGNATURE-----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=oMqg
-----END PGP SIGNATURE-----
Merge tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixlet from Alexandre Belloni:
"A single patch, not really a fix but I don't think there is any reason
to delay it.
Change the mailing list address"
* tag 'rtc-4.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
MAINTAINERS: update RTC mailing list
This is nine fixes, seven of which are for the qedi driver (new in
4.10) the other two are a use after free in the cxgbi drivers and a
potential NULL dereference in the rdac device handler.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=MYEc
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is nine fixes, seven of which are for the qedi driver (new as of
4.10) the other two are a use after free in the cxgbi drivers and a
potential NULL dereference in the rdac device handler"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: libcxgbi: fix skb use after free
scsi: qedi: Fix endpoint NULL panic during recovery.
scsi: qedi: set max_fin_rt default value
scsi: qedi: Set firmware tcp msl timer value.
scsi: qedi: Fix endpoint NULL panic in qedi_set_path.
scsi: qedi: Set dma_boundary to 0xfff.
scsi: qedi: Correctly set firmware max supported BDs.
scsi: qedi: Fix bad pte call trace when iscsiuio is stopped.
scsi: scsi_dh_rdac: Use ctlr directly in rdac_failover_get()
- Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes
- A few upper layer protocol fixes (IPoIB, iSER, SRP)
- A modest number of core fixes
-----BEGIN PGP SIGNATURE-----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=X6Rg
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"For the most part this is just a minor -rc cycle for the rdma
subsystem. Even given that this is all of the -rc patches since the
merge window closed, it's still only about 25 patches:
- Multiple i40iw, nes, iw_cxgb4, hfi1, qib, mlx4, mlx5 fixes
- A few upper layer protocol fixes (IPoIB, iSER, SRP)
- A modest number of core fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (26 commits)
RDMA/SA: Fix kernel panic in CMA request handler flow
RDMA/umem: Fix missing mmap_sem in get umem ODP call
RDMA/core: not to set page dirty bit if it's already set.
RDMA/uverbs: Declare local function static and add brackets to sizeof
RDMA/netlink: Reduce exposure of RDMA netlink functions
RDMA/srp: Fix NULL deref at srp_destroy_qp()
RDMA/IPoIB: Limit the ipoib_dev_uninit_default scope
RDMA/IPoIB: Replace netdev_priv with ipoib_priv for ipoib_get_link_ksettings
RDMA/qedr: add null check before pointer dereference
RDMA/mlx5: set UMR wqe fence according to HCA cap
net/mlx5: Define interface bits for fencing UMR wqe
RDMA/mlx4: Fix MAD tunneling when SRIOV is enabled
RDMA/qib,hfi1: Fix MR reference count leak on write with immediate
RDMA/hfi1: Defer setting VL15 credits to link-up interrupt
RDMA/hfi1: change PCI bar addr assignments to Linux API functions
RDMA/hfi1: fix array termination by appending NULL to attr array
RDMA/iw_cxgb4: fix the calculation of ipv6 header size
RDMA/iw_cxgb4: calculate t4_eq_status_entries properly
RDMA/iw_cxgb4: Avoid touch after free error in ARP failure handlers
RDMA/nes: ACK MPA Reply frame
...
This reverts commit 925bb1ce47.
It causes lots of warnings and problems so for now, let's just revert
it.
Reported-by: <valdis.kletnieks@vt.edu>
Reported-by: Russell King <linux@armlinux.org.uk>
Reported-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Andrey Konovalov <andreyknvl@google.com>
Acked-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nfs_initialise_sb() and nfs_clone_super() are declared as extern even
though they are used only in fs/nfs/super.c. Mark them as static.
Also remove explicit 'inline' directive from nfs_initialise_sb() and
leave it upto compiler to decide whether inlining is worth it.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GtgN
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"A couple of patches for the aspeed pwm fan driver"
* tag 'hwmon-for-linus-v4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (aspeed-pwm-tacho) make fan/pwm names start with index 1
hwmon: (aspeed-pwm-tacho) Call of_node_put() on a node not claimed
hwmon: (aspeed-pwm-tacho) On read failure return -ETIMEDOUT
hwmon: (aspeed-pwm-tacho) Select REGMAP
NAND updates from Boris:
"""
tango fixes:
* Add missing MODULE_DEVICE_TABLE() in tango_nand.c
* Update the number of corrected bitflips
core fixes:
* Fix a long standing memory leak in nand_scan_tail()
* Fix several bugs introduced by the per-vendor init/detection
infrastructure (introduced in 4.12)
* Add a static specifier to nand_ooblayout_lp_hamming_ops definition
"""
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=y6Ps
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris:
"NAND updates from Boris:
tango fixes:
- Add missing MODULE_DEVICE_TABLE() in tango_nand.c
- Update the number of corrected bitflips
core fixes:
- Fix a long standing memory leak in nand_scan_tail()
- Fix several bugs introduced by the per-vendor init/detection
infrastructure (introduced in 4.12)
- Add a static specifier to nand_ooblayout_lp_hamming_ops definition"
* tag 'for-linus-20170602' of git://git.infradead.org/linux-mtd:
mtd: nand: make nand_ooblayout_lp_hamming_ops static
mtd: nand: tango: Update ecc_stats.corrected
mtd: nand: tango: Export OF device ID table as module aliases
mtd: nand: samsung: warn about un-parseable ECC info
mtd: nand: free vendor-specific resources in init failure paths
mtd: nand: drop unneeded module.h include
mtd: nand: don't leak buffers when ->scan_bbt() fails
Make fan and pwm names in sysfs start with index 1 in accordance to
Documentation/hwmon/sysfs-interface conventions.
Current implementation starts with index 0, making tools such as
sensors(1) skip the first fan.
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a3e ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Call of_node_put() on a node claimed with of_node_get() or by any other
means such as for_each_child_of_node().
Signed-off-by: Stefan Schaeckeler <sschaeck@cisco.com>
Fixes: 2d7a548a3e ("drivers: hwmon: Support for ASPEED PWM/Fan tach")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This patch fixes the kernel doc warnings in the driver.
Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the hooks for an optional reset controller in the 8250 device
tree node.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gsm_cleanup_mux() is called in the line discipline close path which
is called at tty_release() time. At this stage the tty is no longer
operational enough to send any frames. Sending close frames is
therefore not possible and waiting for their answers always times
out.
This patch removes sending close messages and waiting for their answers
from the tty_release path.
This patch makes explicit what previously implicitly had been the case
already: We are not able to tell the modem that we are about to close
the multiplexer on our side. This means the modem will stay in
multiplexer mode and re-establishing the multiplexer later fails. The
only way for userspace to work around this is to manually send a close
frame in N_TTY mode after closing the mux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
sccnxp driver doesn't get the correct uart clock rate, if CONFIG_HAVE_CLOCK
is disabled. Correct usage of clk API to make it work with/without it.
Fixes: 90efa75f7a (serial: sccnxp: Using CLK API for getting UART clock)
Suggested-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Historically the N_TTY driver could never fail but this has become broken over
time. Rather than trying to rewrite half the ldisc layer to fix the breakage
introduce a second level of fallback with an N_NULL ldisc which cannot fail,
and thus restore the guarantees required by the ldisc layer.
We still try and fail to N_TTY first. It's much more useful to find yourself
back in your old ldisc (first attempt) or in N_TTY (second attempt), and while
I'm not aware of any code out there that makes those assumptions it's good to
drive(r) defensively.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Over in the staging tree, N_SPEAKUP is added, so to make life easier for
merging and other development, also reserve it in the tty tree.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
acpi_dev_found checks that there is a matching ACPI node, but it
may be disabled (_STA method returns 0) in which case the
soc_button_array driver will not bind to it and axp20x-pek should
handle the power-button.
This commit switches from acpi_dev_found to acpi_dev_present to
avoid not registering an input-dev for the powerbutton when there
is a disabled PNP0C40 device.
The ACPI-6.0 standard defines a standard gpio button device using
the ACPI0011 HID replacing the custom PNP0C40 gpio device, many
newer devices define both PNP0C40 and ACPI0011 devices enabling one
or the other depending on whether the BIOS thinks it is going to boot
Android or Windows.
This commit adds a check for the ACPI0011 device, so that if
either device is present *and* enabled we don't register an input-dev
for the powerbutton.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 9b13a4ca8d ("Input: axp20x-pek - do not register input device
on some systems") added a check for the INTCFD9 ACPI device which also
handles the powerbutton as on some systems the powerbutton is connected
to both the PMIC, handled by axp20x-pek, and to a gpio on the SoC, handled
by soc_button_array which attaches itself to the INTCFD9 ACPI device.
Testing + comparing DSDTs has shown that this only happens on Cherry
Trail devices with an AXP288 PMIC, the AXP288 PMIC is also used on
Bay Trail devices but there the power button is only connected to
the PMIC and not handled by soc_button_array.
This means that the INTCFD9 check has caused a regression on Bay Trail
devices, causing power-button presses to no longer be seen.
This commit fixes this by limiting the check to devices where the ACPI
node for the AXP288 contains a _HRV (hardware revision) attribute with
a value of 3 which indicates we are dealing with a Cherry Trail platform.
Fixes: 9b13a4ca8d ("Input: axp20x-pek - do not register input ...")
Reported-by: Сергей Трусов <t.rus76@ya.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJZK2lrAAoJEHm+PkMAQRiGm3AH/13F1DlIk05aSXHoDr/idIpR
GMHmk3YF+EuFjsL463Sh6s/SSWmz0Lda8euaoB4wCWvQFX2ZjTE+aOd79XlRiZJQ
OTtLkV9I41eXIJUpEOHia7xZiCsbw+usqcHrm1aBoSh5KKV2iQmEOrnJdibqJVOF
eXUMphNK/zFtAd2bKtQSxkaBnOOqsQUgVQSkr2K9rSg25l0KokFC6c5K5IjLn4x9
QgDY4wmMvHrDz0CtpoqlNM4XqbsDJVrFeZGfg6hlMqSRDeXeg4h3Ol0VfIT496RP
QBdrDb6hWO+HKt9B0M+7Q+8a/Fsw+5dtpqv1W/Wlr0i4CS6euU8NChAmrpkrqGo=
=m5ba
-----END PGP SIGNATURE-----
Merge tag 'v4.12-rc3' into for-linus
Merge with mainline to get acpi_dev_present() needed by patches to
axp20x-pek driver.
- Revert one more commit related to the ACPI-based handling of
laptop lids that changed the default behavior on laptops that
booted with closed lids and introduced a regression there
(Benjamin Tissoires).
- Add a missing acpi_put_table() to the code implementing the
/sys/firmware/acpi/tables interface to prevent a counter in
the ACPICA core from overflowing (Dan Williams).
- Drop error messages printed by ACPICA on acpi_get_table()
reference counting mismatches as they need not indicate real
errors at this point (Lv Zheng).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=5CiR
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert one more problematic commit related to the ACPI-based
handling of laptop lids and make some unuseful error messages coming
from ACPICA go away.
Specifics:
- Revert one more commit related to the ACPI-based handling of laptop
lids that changed the default behavior on laptops that booted with
closed lids and introduced a regression there (Benjamin Tissoires).
- Add a missing acpi_put_table() to the code implementing the
/sys/firmware/acpi/tables interface to prevent a counter in the
ACPICA core from overflowing (Dan Williams).
- Drop error messages printed by ACPICA on acpi_get_table() reference
counting mismatches as they need not indicate real errors at this
point (Lv Zheng)"
* tag 'acpi-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Tables: Fix regression introduced by a too early mechanism enabling
Revert "ACPI / button: Change default behavior to lid_init_state=open"
ACPI / sysfs: fix acpi_get_table() leak / acpi-sysfs denial of service
- Make cpufreq_register_driver() return an error if the ->init()
calls fail for all CPUs to prevent non-functional drivers from
hanging around for no reason (David Arcari).
- Make kirkwood-cpufreq check the return value of clk_prepare_enable()
(which may fail) as appropriate (Arvind Yadav).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dmsR
-----END PGP SIGNATURE-----
Merge tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two bugs in error code paths in the cpufreq core and in the
kirkwood-cpufreq driver.
Specifics:
- Make cpufreq_register_driver() return an error if the ->init()
calls fail for all CPUs to prevent non-functional drivers from
hanging around for no reason (David Arcari).
- Make kirkwood-cpufreq check the return value of
clk_prepare_enable() (which may fail) as appropriate (Arvind
Yadav)"
* tag 'pm-4.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: kirkwood-cpufreq:- Handle return value of clk_prepare_enable()
cpufreq: cpufreq_register_driver() should return -ENODEV if init fails
which can causes crashes in drivers/char/random.c:get_reg().
-----BEGIN PGP SIGNATURE-----
iQEyBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlkxzw8ACgkQ8vlZVpUN
gaMFowf2KbhElx9OO7Nc62adSF8Ni9vJgk9kigOgrHFXCk4AV5L2QtyLBfk9gIOb
QxG62fzs2mnnL26SgnvN+5qbuZch9G0GjZDOQTpAcxvT9EL67oZ5EhM3AJAHckOW
LxSYCJKYBZqvd4dTHZI36gGNfnpYY7O58pRydE1BPPYSftzaQSS0UtMdcBkjCOoc
Kix35I8PpIhXBubgTE2I38FlGHneS442FAGctnMa/8QlqbkCjSqd1V2rdqxvlNvi
lQ4AG+6xLu2r/yCXqwHf18sKjt6XuluqrJTQGdUzarFw20ikURjSxwlu5Rh2PwJk
hyFHMzBlQ7o68XBDk4LzNkNPgBSb
=4W3q
-----END PGP SIGNATURE-----
Merge tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull /dev/random bug fix from Ted Ts'o:
"Fix a race on architectures with prioritized interrupts (such as m68k)
which can causes crashes in drivers/char/random.c:get_reg()"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
fix race in drivers/char/random.c:get_reg()
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
scripts/gdb: make lx-dmesg command work (reliably)
mm: consider memblock reservations for deferred memory initialization sizing
mm/hugetlb: report -EHWPOISON not -EFAULT when FOLL_HWPOISON is specified
mlock: fix mlock count can not decrease in race condition
mm/migrate: fix refcount handling when !hugepage_migration_supported()
dax: fix race between colliding PMD & PTE entries
mm: avoid spurious 'bad pmd' warning messages
mm/page_alloc.c: make sure OOM victim can try allocations with no watermarks once
pcmcia: remove left-over %Z format
slub/memcg: cure the brainless abuse of sysfs attributes
initramfs: fix disabling of initramfs (and its compression)
mm: clarify why we want kmalloc before falling backto vmallock
frv: declare jiffies to be located in the .data section
include/linux/gfp.h: fix ___GFP_NOLOCKDEP value
ksm: prevent crash after write_protect_page fails
lx-dmesg needs access to the log_buf symbol from printk.c.
Unfortunately, the symbol log_buf also exists in BPF's verifier.c and
hence gdb can pick one or the other. If it happens to pick BPF's
log_buf, lx-dmesg doesn't work:
(gdb) lx-dmesg
Python Exception <class 'gdb.MemoryError'> Cannot access memory at address 0x0:
Error occurred in Python command: Cannot access memory at address 0x0
(gdb) p log_buf
$15 = 0x0
Luckily, GDB has a way to deal with this, see
https://sourceware.org/gdb/onlinedocs/gdb/Symbols.html
(gdb) info variables ^log_buf$
All variables matching regular expression "^log_buf$":
File <linux.git>/kernel/bpf/verifier.c:
static char *log_buf;
File <linux.git>/kernel/printk/printk.c:
static char *log_buf;
(gdb) p 'verifier.c'::log_buf
$1 = 0x0
(gdb) p 'printk.c'::log_buf
$2 = 0x811a6aa0 <__log_buf> ""
(gdb) p &log_buf
$3 = (char **) 0x8120fe40 <log_buf>
(gdb) p &'verifier.c'::log_buf
$4 = (char **) 0x8120fe40 <log_buf>
(gdb) p &'printk.c'::log_buf
$5 = (char **) 0x8048b7d0 <log_buf>
By being explicit about the location of the symbol, we can make lx-dmesg
work again. While at it, do the same for the other symbols we need from
printk.c
Link: http://lkml.kernel.org/r/20170526112222.3414-1-git@andred.net
Signed-off-by: André Draszik <git@andred.net>
Tested-by: Kieran Bingham <kieran@bingham.xyz>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have seen an early OOM killer invocation on ppc64 systems with
crashkernel=4096M:
kthreadd invoked oom-killer: gfp_mask=0x16040c0(GFP_KERNEL|__GFP_COMP|__GFP_NOTRACK), nodemask=7, order=0, oom_score_adj=0
kthreadd cpuset=/ mems_allowed=7
CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.4.68-1.gd7fe927-default #1
Call Trace:
dump_stack+0xb0/0xf0 (unreliable)
dump_header+0xb0/0x258
out_of_memory+0x5f0/0x640
__alloc_pages_nodemask+0xa8c/0xc80
kmem_getpages+0x84/0x1a0
fallback_alloc+0x2a4/0x320
kmem_cache_alloc_node+0xc0/0x2e0
copy_process.isra.25+0x260/0x1b30
_do_fork+0x94/0x470
kernel_thread+0x48/0x60
kthreadd+0x264/0x330
ret_from_kernel_thread+0x5c/0xa4
Mem-Info:
active_anon:0 inactive_anon:0 isolated_anon:0
active_file:0 inactive_file:0 isolated_file:0
unevictable:0 dirty:0 writeback:0 unstable:0
slab_reclaimable:5 slab_unreclaimable:73
mapped:0 shmem:0 pagetables:0 bounce:0
free:0 free_pcp:0 free_cma:0
Node 7 DMA free:0kB min:0kB low:0kB high:0kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:52428800kB managed:110016kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:320kB slab_unreclaimable:4672kB kernel_stack:1152kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? yes
lowmem_reserve[]: 0 0 0 0
Node 7 DMA: 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB 0*8192kB 0*16384kB = 0kB
0 total pagecache pages
0 pages in swap cache
Swap cache stats: add 0, delete 0, find 0/0
Free swap = 0kB
Total swap = 0kB
819200 pages RAM
0 pages HighMem/MovableOnly
817481 pages reserved
0 pages cma reserved
0 pages hwpoisoned
the reason is that the managed memory is too low (only 110MB) while the
rest of the the 50GB is still waiting for the deferred intialization to
be done. update_defer_init estimates the initial memoty to initialize
to 2GB at least but it doesn't consider any memory allocated in that
range. In this particular case we've had
Reserving 4096MB of memory at 128MB for crashkernel (System RAM: 51200MB)
so the low 2GB is mostly depleted.
Fix this by considering memblock allocations in the initial static
initialization estimation. Move the max_initialise to
reset_deferred_meminit and implement a simple memblock_reserved_memory
helper which iterates all reserved blocks and sums the size of all that
start below the given address. The cumulative size is than added on top
of the initial estimation. This is still not ideal because
reset_deferred_meminit doesn't consider holes and so reservation might
be above the initial estimation whihch we ignore but let's make the
logic simpler until we really need to handle more complicated cases.
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Link: http://lkml.kernel.org/r/20170531104010.GI27783@dhcp22.suse.cz
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org> [4.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KVM uses get_user_pages() to resolve its stage2 faults. KVM sets the
FOLL_HWPOISON flag causing faultin_page() to return -EHWPOISON when it
finds a VM_FAULT_HWPOISON. KVM handles these hwpoison pages as a
special case. (check_user_page_hwpoison())
When huge pages are involved, this doesn't work so well.
get_user_pages() calls follow_hugetlb_page(), which stops early if it
receives VM_FAULT_HWPOISON from hugetlb_fault(), eventually returning
-EFAULT to the caller. The step to map this to -EHWPOISON based on the
FOLL_ flags is missing. The hwpoison special case is skipped, and
-EFAULT is returned to user-space, causing Qemu or kvmtool to exit.
Instead, move this VM_FAULT_ to errno mapping code into a header file
and use it from faultin_page() and follow_hugetlb_page().
With this, KVM works as expected.
This isn't a problem for arm64 today as we haven't enabled
MEMORY_FAILURE, but I can't see any reason this doesn't happen on x86
too, so I think this should be a fix. This doesn't apply earlier than
stable's v4.11.1 due to all sorts of cleanup.
[james.morse@arm.com: add vm_fault_to_errno() call to faultin_page()]
suggested.
Link: http://lkml.kernel.org/r/20170525171035.16359-1-james.morse@arm.com
[akpm@linux-foundation.org: coding-style fixes]
Link: http://lkml.kernel.org/r/20170524160900.28786-1-james.morse@arm.com
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: <stable@vger.kernel.org> [4.11.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kefeng reported that when running the follow test, the mlock count in
meminfo will increase permanently:
[1] testcase
linux:~ # cat test_mlockal
grep Mlocked /proc/meminfo
for j in `seq 0 10`
do
for i in `seq 4 15`
do
./p_mlockall >> log &
done
sleep 0.2
done
# wait some time to let mlock counter decrease and 5s may not enough
sleep 5
grep Mlocked /proc/meminfo
linux:~ # cat p_mlockall.c
#include <sys/mman.h>
#include <stdlib.h>
#include <stdio.h>
#define SPACE_LEN 4096
int main(int argc, char ** argv)
{
int ret;
void *adr = malloc(SPACE_LEN);
if (!adr)
return -1;
ret = mlockall(MCL_CURRENT | MCL_FUTURE);
printf("mlcokall ret = %d\n", ret);
ret = munlockall();
printf("munlcokall ret = %d\n", ret);
free(adr);
return 0;
}
In __munlock_pagevec() we should decrement NR_MLOCK for each page where
we clear the PageMlocked flag. Commit 1ebb7cc6a5 ("mm: munlock: batch
NR_MLOCK zone state updates") has introduced a bug where we don't
decrement NR_MLOCK for pages where we clear the flag, but fail to
isolate them from the lru list (e.g. when the pages are on some other
cpu's percpu pagevec). Since PageMlocked stays cleared, the NR_MLOCK
accounting gets permanently disrupted by this.
Fix it by counting the number of page whose PageMlock flag is cleared.
Fixes: 1ebb7cc6a5 (" mm: munlock: batch NR_MLOCK zone state updates")
Link: http://lkml.kernel.org/r/1495678405-54569-1-git-send-email-xieyisheng1@huawei.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joern Engel <joern@logfs.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michel Lespinasse <walken@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Cc: zhongjiang <zhongjiang@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On failing to migrate a page, soft_offline_huge_page() performs the
necessary update to the hugepage ref-count.
But when !hugepage_migration_supported() , unmap_and_move_hugepage()
also decrements the page ref-count for the hugepage. The combined
behaviour leaves the ref-count in an inconsistent state.
This leads to soft lockups when running the overcommitted hugepage test
from mce-tests suite.
Soft offlining pfn 0x83ed600 at process virtual address 0x400000000000
soft offline: 0x83ed600: migration failed 1, type 1fffc00000008008 (uptodate|head)
INFO: rcu_preempt detected stalls on CPUs/tasks:
Tasks blocked on level-0 rcu_node (CPUs 0-7): P2715
(detected by 7, t=5254 jiffies, g=963, c=962, q=321)
thugetlb_overco R running task 0 2715 2685 0x00000008
Call trace:
dump_backtrace+0x0/0x268
show_stack+0x24/0x30
sched_show_task+0x134/0x180
rcu_print_detail_task_stall_rnp+0x54/0x7c
rcu_check_callbacks+0xa74/0xb08
update_process_times+0x34/0x60
tick_sched_handle.isra.7+0x38/0x70
tick_sched_timer+0x4c/0x98
__hrtimer_run_queues+0xc0/0x300
hrtimer_interrupt+0xac/0x228
arch_timer_handler_phys+0x3c/0x50
handle_percpu_devid_irq+0x8c/0x290
generic_handle_irq+0x34/0x50
__handle_domain_irq+0x68/0xc0
gic_handle_irq+0x5c/0xb0
Address this by changing the putback_active_hugepage() in
soft_offline_huge_page() to putback_movable_pages().
This only triggers on systems that enable memory failure handling
(ARCH_SUPPORTS_MEMORY_FAILURE) but not hugepage migration
(!ARCH_ENABLE_HUGEPAGE_MIGRATION).
I imagine this wasn't triggered as there aren't many systems running
this configuration.
[akpm@linux-foundation.org: remove dead comment, per Naoya]
Link: http://lkml.kernel.org/r/20170525135146.32011-1-punit.agrawal@arm.com
Reported-by: Manoj Iyer <manoj.iyer@canonical.com>
Tested-by: Manoj Iyer <manoj.iyer@canonical.com>
Suggested-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
