Kbuild conventionally uses $(shell cd ... && /bin/pwd) idiom to get
the absolute path of the directory because GNU Make 3.80, the minimal
supported version at that time, did not support $(abspath ...) or
$(realpath ...).
Commit 37d69ee308 ("docs: bump minimal GNU Make version to 3.81")
dropped the GNU Make 3.80 support, so we are now allowed to use those
make-builtin helpers.
This conversion will provide better portability without relying on
the pwd command or its location /bin/pwd.
I am intentionally using $(realpath ...) instead $(abspath ...) in
some places. The difference between the two is $(realpath ...)
returns an empty string if the given path does not exist. It is
convenient in places where we need to error-out if the makefile fails
to create an output directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Thierry Reding <treding@nvidia.com>
mmio_flush_range() suffers from a lack of clearly-defined semantics,
and is somewhat ambiguous to port to other architectures where the
scope of the writeback implied by "flush" and ordering might matter,
but MMIO would tend to imply non-cacheable anyway. Per the rationale
in 67a3e8fe90 ("nd_blk: change aperture mapping from WC to WB"), the
only existing use is actually to invalidate clean cache lines for
ARCH_MEMREMAP_PMEM type mappings *without* writeback. Since the recent
cleanup of the pmem API, that also now happens to be the exact purpose
of arch_invalidate_pmem(), which would be a far more well-defined tool
for the job.
Rather than risk potentially inconsistent implementations of
mmio_flush_range() for the sake of one callsite, streamline things by
removing it entirely and instead move the ARCH_MEMREMAP_PMEM related
definitions up to the libnvdimm level, so they can be shared by NFIT
as well. This allows NFIT to be enabled for arm64.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch adds recovery from false busy state on concurrent attach
operation.
The procedure of attach operation is as below.
1) Find an unused port in /sys/devices/platform/vhci_hcd/status.
(userspace)
2) Request attach found port to driver through
/sys/devices/platform/vhci_hcd/attach. (userspace)
3) Lock table, reserve requested port and unlock table. (vhci driver)
Attaching more than one remote devices concurrently, same unused port
number will be found in step-1. Then one request will succeed and
others will fail even though there are some unused ports.
With this patch, driver returns EBUSY when requested port has already
been used. In this case, attach command retries from step-1: finding
another unused port. If there's no unused port, the attach operation
will fail in step-1. Otherwise it retries automatically using another
unused port.
vhci-hcd's interface (only errno) is changed as following.
Current errno New errno Condition
EINVAL same as left specified port number is in invalid
range
EAGAIN same as left platform_get_drvdata() failed
EINVAL same as left specified socket fd is not valid
EINVAL EBUSY specified port status is not free
The errno EBUSY was not used in userspace
src/usbip_attach.c:import_device(). It is needed to distinguish the
condition to be able to retry from other unrecoverable errors.
It is possible to avoid this failure by introducing userspace exclusive
control. But it's exaggerated for this special condition. The locking
itself has done in driver.
As an alternate solution, userspace doesn't specify port number, driver
searches unused port and it returns port number to the userspace. With
this solution, the interface is much different than this patch.
Signed-off-by: Nobuo Iwata <nobuo.iwata@fujixerox.co.jp>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently these tests won't build with a `--enable-default-pie`
compiler as they require r30 to be clobbered. This gives
an error:
ptrace-tm-spd-gpr.c:41:2: error: PIC register clobbered by 'r30' in 'asm'
This forces these tests to be built no-pie.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
.llong is an undocumented PPC specific directive. The generic
equivalent is .quad, but even better (because it's self describing) is
.8byte.
Convert all .llong directives to .8byte.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Trivial fix to typos in printf error messages:
"conenct" -> "connect"
"listeen" -> "listen"
thanks to Daniel Borkmann for spotting one of these mistakes
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The branch history code has a loop detection function. With this, we can
get the number of iterations by calculating the removed loops.
While it would be nice for knowing the average cycles of iterations.
This patch adds up the cycles in branch entries of removed loops and
save the result to the next branch entry (e.g. branch entry A).
Finally it will display the iteration number and average cycles at the
"from" of branch entry A.
For example:
perf record -g -j any,save_type ./div
perf report --branch-history --no-children --stdio
--22.63%--main div.c:42 (RET CROSS_2M)
compute_flag div.c:28 (cycles:2 iter:173115 avg_cycles:2)
|
--10.73%--compute_flag div.c:27 (RET CROSS_2M)
rand rand.c:28 (cycles:1)
rand rand.c:28 (RET CROSS_2M)
__random random.c:298 (cycles:1)
__random random.c:297 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (COND_BWD CROSS_2M)
__random random.c:295 (cycles:1)
__random random.c:295 (RET CROSS_2M)
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1502111115-18305-1-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnd Bergmann reported the following warning with GCC 7.1.1:
fs/fs_pin.o: warning: objtool: pin_kill()+0x139: stack state mismatch: cfa1=7+88 cfa2=7+96
And the kbuild robot reported the following warnings with GCC 5.4.1:
fs/fs_pin.o: warning: objtool: pin_kill()+0x182: return with modified stack frame
fs/quota/dquot.o: warning: objtool: dquot_alloc_inode()+0x140: stack state mismatch: cfa1=7+120 cfa2=7+128
fs/quota/dquot.o: warning: objtool: dquot_free_inode()+0x11a: stack state mismatch: cfa1=7+112 cfa2=7+120
Those warnings are caused by an unusual GCC non-optimization where it
uses an intermediate register to adjust the stack pointer. It does:
lea 0x8(%rsp), %rcx
...
mov %rcx, %rsp
Instead of the obvious:
add $0x8, %rsp
It makes no sense to use an intermediate register, so I opened a GCC bug
to track it:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81813
But it's not exactly a high-priority bug and it looks like we'll be
stuck with this issue for a while. So for now we have to track register
values when they're loaded with stack pointer offsets.
This is kind of a big workaround for a tiny problem, but c'est la vie.
I hope to eventually create a GCC plugin to implement a big chunk of
objtool's functionality. Hopefully at that point we'll be able to
remove of a lot of these GCC-isms from the objtool code.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/6a41a96884c725e7f05413bb7df40cfe824b2444.1504028945.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch adds a new testcase for the IFE type setting in tc. In case
of user specified the type it will check if the ife is correctly
configured to react on it. If it's not specified the default IFE type
should be used.
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix remote HITM detection for Skylake in 'perf c2c' (Jiri Olsa)
- Fixes for the handling of PERF_RECORD_READ records (Jiri Olsa)
- Fix kprobes blackist symbol lookup in 'perf probe' (Li Bin)
- The PLT header and entry sizes are not the same in !x86, fix it for ARM and
AARCH64 (Li Bin)
- Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace' (Arnaldo Carvalho de Melo)
- Fix CC, AR, LD external definition, allow flex and bison to be
externally defined and other related Makefile fixes (David Carrillo-Cisneros)
- Sync cpu features kernel ABI headers with tooling headers (Arnaldo Carvalho de Melo)
- Fix path to PMU formats in 'perf stat' documentation (Jack Henschel)
- Fix static build with newer toolchains (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=xoPe
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.14-20170829' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Fix remote HITM detection for Skylake in 'perf c2c' (Jiri Olsa)
- Fixes for the handling of PERF_RECORD_READ records (Jiri Olsa)
- Fix kprobes blackist symbol lookup in 'perf probe' (Li Bin)
- The PLT header and entry sizes are not the same in !x86, fix it for ARM and
AARCH64 (Li Bin)
- Beautify pkey_{alloc,free,mprotect} arguments in 'perf trace' (Arnaldo Carvalho de Melo)
- Fix CC, AR, LD external definition, allow flex and bison to be
externally defined and other related Makefile fixes (David Carrillo-Cisneros)
- Sync CPU features kernel ABI headers with tooling headers (Arnaldo Carvalho de Melo)
- Fix path to PMU formats in 'perf stat' documentation (Jack Henschel)
- Fix static build with newer toolchains (Jiri Olsa)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a missing option help line for performing legacy interrupt test.
Signed-off-by: Stan Drozd <drozdziak1@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
On x86, the plt header size is as same as the plt entry size, and can be
identified from shdr's sh_entsize of the plt.
But we can't assume that the sh_entsize of the plt shdr is always the
plt entry size in all architecture, and the plt header size may be not
as same as the plt entry size in some architecure.
On ARM, the plt header size is 20 bytes and the plt entry size is 12
bytes (don't consider the FOUR_WORD_PLT case) that refer to the binutils
implementation. The plt section is as follows:
Disassembly of section .plt:
000004a0 <__cxa_finalize@plt-0x14>:
4a0: e52de004 push {lr} ; (str lr, [sp, #-4]!)
4a4: e59fe004 ldr lr, [pc, #4] ; 4b0 <_init+0x1c>
4a8: e08fe00e add lr, pc, lr
4ac: e5bef008 ldr pc, [lr, #8]!
4b0: 00008424 .word 0x00008424
000004b4 <__cxa_finalize@plt>:
4b4: e28fc600 add ip, pc, #0, 12
4b8: e28cca08 add ip, ip, #8, 20 ; 0x8000
4bc: e5bcf424 ldr pc, [ip, #1060]! ; 0x424
000004c0 <printf@plt>:
4c0: e28fc600 add ip, pc, #0, 12
4c4: e28cca08 add ip, ip, #8, 20 ; 0x8000
4c8: e5bcf41c ldr pc, [ip, #1052]! ; 0x41c
On AARCH64, the plt header size is 32 bytes and the plt entry size is 16
bytes. The plt section is as follows:
Disassembly of section .plt:
0000000000000560 <__cxa_finalize@plt-0x20>:
560: a9bf7bf0 stp x16, x30, [sp,#-16]!
564: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
568: f944be11 ldr x17, [x16,#2424]
56c: 9125e210 add x16, x16, #0x978
570: d61f0220 br x17
574: d503201f nop
578: d503201f nop
57c: d503201f nop
0000000000000580 <__cxa_finalize@plt>:
580: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
584: f944c211 ldr x17, [x16,#2432]
588: 91260210 add x16, x16, #0x980
58c: d61f0220 br x17
0000000000000590 <__gmon_start__@plt>:
590: 90000090 adrp x16, 10000 <__FRAME_END__+0xf8a8>
594: f944c611 ldr x17, [x16,#2440]
598: 91262210 add x16, x16, #0x988
59c: d61f0220 br x17
NOTES:
In addition to ARM and AARCH64, other architectures, such as
s390/alpha/mips/parisc/poperpc/sh/sparc/xtensa also need to consider
this issue.
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexis Berlemont <alexis.berlemont@gmail.com>
Cc: David Tolnay <dtolnay@gmail.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Link: http://lkml.kernel.org/r/1496622849-21877-1-git-send-email-huawei.libin@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The commit 9aaf5a5f47 ("perf probe: Check kprobes blacklist when
adding new events"), 'perf probe' supports checking the blacklist of the
fuctions which can not be probed. But the checking condition is wrong,
that the end_addr of the symbol which is the start_addr of the next
symbol can't be included.
Committer notes:
IOW make it match its kernel counterpart in kernel/kprobes.c:
bool within_kprobe_blacklist(unsigned long addr)
Each entry have as its end address not its end address, but the first
address _outside_ that symbol, which for related functions, is the first
address of the next symbol, like these from kernel/trace/trace_probe.c:
0xffffffffbd198df0-0xffffffffbd198e40 print_type_u8
0xffffffffbd198e40-0xffffffffbd198e90 print_type_u16
0xffffffffbd198e90-0xffffffffbd198ee0 print_type_u32
0xffffffffbd198ee0-0xffffffffbd198f30 print_type_u64
0xffffffffbd198f30-0xffffffffbd198f80 print_type_s8
0xffffffffbd198f80-0xffffffffbd198fd0 print_type_s16
0xffffffffbd198fd0-0xffffffffbd199020 print_type_s32
0xffffffffbd199020-0xffffffffbd199070 print_type_s64
0xffffffffbd199070-0xffffffffbd1990c0 print_type_x8
0xffffffffbd1990c0-0xffffffffbd199110 print_type_x16
0xffffffffbd199110-0xffffffffbd199160 print_type_x32
0xffffffffbd199160-0xffffffffbd1991b0 print_type_x64
But not always:
0xffffffffbd1997b0-0xffffffffbd1997c0 fetch_kernel_stack_address (kernel/trace/trace_probe.c)
0xffffffffbd1c57f0-0xffffffffbd1c58b0 __context_tracking_enter (kernel/context_tracking.c)
Signed-off-by: Li Bin <huawei.libin@huawei.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: zhangmengting@huawei.com
Fixes: 9aaf5a5f47 ("perf probe: Check kprobes blacklist when adding new events")
Link: http://lkml.kernel.org/r/1504011443-7269-1-git-send-email-huawei.libin@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a basic test for checking whether kernel is populating
the jited and xlated BPF images. It was used to confirm
the behaviour change from commit d777b2ddbe ("bpf: don't
zero out the info struct in bpf_obj_get_info_by_fd()"),
which made bpf_obj_get_info_by_fd() usable for retrieving
the image dumps.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reuse 'mprotect' beautifiers for 'pkey_mprotect'.
System wide tracing pkey_alloc, pkey_free and pkey_mprotect calls, with
backtraces:
# perf trace -e pkey_alloc,pkey_mprotect,pkey_free --max-stack=5
0.000 ( 0.011 ms): pkey/7818 pkey_alloc(init_val: DISABLE_ACCESS|DISABLE_WRITE) = -1 EINVAL Invalid argument
syscall (/usr/lib64/libc-2.25.so)
pkey_alloc (/home/acme/c/pkey)
0.022 ( 0.003 ms): pkey/7818 pkey_mprotect(start: 0x7f28c3890000, len: 4096, prot: READ|WRITE, pkey: -1) = 0
syscall (/usr/lib64/libc-2.25.so)
pkey_mprotect (/home/acme/c/pkey)
0.030 ( 0.002 ms): pkey/7818 pkey_free(pkey: -1 ) = -1 EINVAL Invalid argument
syscall (/usr/lib64/libc-2.25.so)
pkey_free (/home/acme/c/pkey)
The tools/include/uapi/asm-generic/mman-common.h file is used to find
the access rights defines for the pkey_alloc syscall second argument.
Since we have the detector of changes for the tools/include header files
versus its kernel origin (include/uapi/asm-generic/mman-common.h), we'll
get whatever new flag appears for that argument automatically.
This method should be used in other cases where it is easy to generate
those flags tables because the header has properly namespaced defines
like PKEY_DISABLE_ACCESS and PKEY_DISABLE_WRITE.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3xq5312qlks7wtfzv2sk3nct@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These changes made the tools/arch/x86/include/ headers to drift from its
kernel origins:
910448bbed ("perf/x86/amd/uncore: Rename cpufeatures macro for cache counters")
5442c26995 ("x86/cpufeature, kvm/svm: Rename (shorten) the new "virtualized VMSAVE/VMLOAD" CPUID flag")
cba4671af7 ("x86/mm: Disable PCID on 32-bit kernels")
Which was detected while building perf:
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
This sync causes just these perf object files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And the changes in the above changesets don't entail any need for change
in the above 'perf bench' files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-456aafouj911a4x4zwt8stkm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When building with an external FEATURES_DUMP, bpf complains
that features dump file is not found. Fix it by passing full file path.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-7-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Prior to this patch, make scripts tested for CLANG with ifeq ($(CC),
clang), failing to detect CLANG binaries with different names. Fix it by
testing for the existence of __clang__ macro in the list of compiler
defined macros.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-5-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use already defined values for CC, AR and LD when available.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-4-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow user to define flex and bison binary names by passing FLEX and
BISON variables.
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Paul Turner <pjt@google.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20170827075442.108534-3-davidcc@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There's no big value on displaying counts for every event ID, which is
one per every CPU. Rather than that, displaying the whole sum for the
event.
$ perf record -c 100000 -e cycles:u -s test
$ perf report -T
Before:
# PID TID cycles:u cycles:u cycles:u cycles:u ... [20 more columns of 'cycles:u']
3339 3339 0 0 0 0
3340 3340 0 0 0 0
3341 3341 0 0 0 0
3342 3342 0 0 0 0
Now:
# PID TID cycles:u
3339 3339 19678
3340 3340 18744
3341 3341 17335
3342 3342 26414
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to make sure the array of value pointers are zero initialized,
because we use them in realloc later on and uninitialized non zero value
will cause allocation error and aborted execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-9-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Bailing out in case the allocation failed, not the other way round.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We are taking wrong index (+1) for first thread, which leaves thread
with index 0 unused and uninitialized.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding dump_read function to gather all the dump output of read
function. Adding output of enabled and running times and id if enabled
(3 new lines with '...' prefix below).
$ perf record -s ...
$ perf report -D
958358311769 0x91f8 [0x40]: PERF_RECORD_READ: 3339 3339 cycles:u 0
... time enabled : 958358313731
... time running : 958358313731
... id : 80
Committer note:
Do not use 'read' as a variable name as it breaks the build on older
systems, such as RHEL6:
CC /tmp/build/perf/util/session.o
cc1: warnings being treated as errors
util/session.c: In function 'dump_read':
util/session.c:1132: error: declaration of 'read' shadows a global declaration
/usr/include/bits/unistd.h:35: error: shadowed declaration is here
mv: cannot stat `/tmp/build/perf/util/.session.o.tmp': No such file or directory
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sockmap is a bit different than normal stress tests that can run
in parallel as is. We need to reuse the same socket pool and map
pool to get good stress test cases.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When attaching a program to sockmap we need to check map type
is correct.
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tests packet read/writes and additional skb fields.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add some more sockmap tests to cover,
- forwarding to NULL entries
- more than two maps to test list ops
- forwarding to different map
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the initial sockmap API we provided strparser and verdict programs
using a single attach command by extending the attach API with a the
attach_bpf_fd2 field.
However, if we add other programs in the future we will be adding a
field for every new possible type, attach_bpf_fd(3,4,..). This
seems a bit clumsy for an API. So lets push the programs using two
new type fields.
BPF_SK_SKB_STREAM_PARSER
BPF_SK_SKB_STREAM_VERDICT
This has the advantage of having a readable name and can easily be
extended in the future.
Updates to samples and sockmap included here also generalize tests
slightly to support upcoming patch for multiple map support.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Fixes: 174a79ff95 ("bpf: sockmap with sk redirect support")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The value passed into the perf.data file for the CONFIGR register in ETMv4
was incorrectly being set to the command line options/ETMv3 value.
Adds bit definitions and function to remap this value to the correct ETMv4
CONFIGR bit values for all selected options.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Return stack is a programmable option on some ETM and PTM hardware.
Adds the option flags to enable this from the perf event command line.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set read_format for what we expect to get from read event generated by
perf_event_attr::inherit_stat.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824162737.7813-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skylake introduced new mem_remote bit in union perf_mem_data_src [1].
It applies to any other memory level to express Remote unknown level, as
is reported by Skylake.
Adding this extra check to c2c_decode_stats to properly decode remote
HITMs on Skylake.
[1] http://lkml.kernel.org/r/20170816222156.19953-4-andi@firstfloor.org
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20170824085732.28481-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We can't pass --dynamic-list list into static build anymore, because
compilers starts to scream about that. Fedora 26 started to fail build
with following error:
$ make LDFLAGS=-static
...
/usr/bin/ld: dynamic STT_GNU_IFUNC symbol `strcmp' with pointer equality in `/usr/lib/gcc/x86_64-redhat-linux/7/../../../../lib64/libc.a(strcmp.o
+)' can not be used when making an executable; recompile with -fPIE and relink with -pie
There's no sense for --dynamic-list in static build, because there's no
.dynsym table in static binary. Consequently the traceevent plugins have
never worked with static build, but it was quietly passed by.
To fix this in future I think we should add support to compile plugins
within the perf binary directly for static build.
Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/n/tip-jeg6a7ff9j9hlqn8k4gllzvv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As defined in tools/perf/util/pmu.c, the EVENT_SOURCE_DEVICE_PATH is
/sys/bus/event_source/devices/ (no traling 's' in event_source)
This patch corrects the path in the perf stat documentation
Signed-off-by: Jack Henschel <jackdev@mailbox.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jack Henschel <jackdev@mailbox.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: trivial@kernel.org
Link: http://lkml.kernel.org/r/20170824132022.10934-1-jackdev@mailbox.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
transport, improperly bringing down the link if SPADs are corrupted, and
an out-of-order issue regarding link negotiation and data passing.
-----BEGIN PGP SIGNATURE-----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=qmzC
-----END PGP SIGNATURE-----
Merge tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb
Pull NTB fixes from Jon Mason:
"NTB bug fixes to address an incorrect ntb_mw_count reference in the
NTB transport, improperly bringing down the link if SPADs are
corrupted, and an out-of-order issue regarding link negotiation and
data passing"
* tag 'ntb-4.13-bugfixes' of git://github.com/jonmason/ntb:
ntb: ntb_test: ensure the link is up before trying to configure the mws
ntb: transport shouldn't disable link due to bogus values in SPADs
ntb: use correct mw_count function in ntb_tool and ntb_transport
Pull x86 fixes from Ingo Molnar:
"Two fixes: one for an ldt_struct handling bug and a cherry-picked
objtool fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix use-after-free of ldt_struct
objtool: Fix '-mtune=atom' decoding support in objtool 2.0
Change common RUN_TESTS to print messages in user friendly TAP13 format.
This change add TAP13 header at the start of RUN_TESTS target run, and
prints the resulting pass/fail messages with test number information in
the TAP 13 format for each test in the run tests list.
This change covers test scripts as well as test programs. Test programs
have an option to use ksft_ API, however test scripts won't be able to.
With this change, test scripts can print TAP13 format output without any
changes to individual scripts.
Test programs can provide TAP13 format output as needed as some tests
already do. Tests that haven't been converted will benefit from this
change. Tests that are converted benefit from the test counts for all
the tests in each test directory.
Running firmware tests:
make --silent -C tools/testing/selftests/firmware/ run_tests
Before the change:
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
selftests: fw_filesystem.sh [FAIL]
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
selftests: fw_fallback.sh [FAIL]
After the change:
TAP version 13
selftests: fw_filesystem.sh
========================================
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
./fw_filesystem.sh: /sys/devices/virtual/misc/test_firmware not present
You must have the following enabled in your kernel:
CONFIG_TEST_FIRMWARE=y
not ok 1..1 selftests: fw_filesystem.sh [FAIL]
selftests: fw_fallback.sh
========================================
modprobe: ERROR: could not insert 'test_firmware': Operation not
permitted
not ok 1..2 selftests: fw_fallback.sh [FAIL]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change lib.mk RUN_TESTS to take test list as an argument. This will
allow it to be called from individual test makefiles to run additional
tests that aren't suitable for a default kselftest run. As an example,
timers test includes destructive tests that aren't included in the
common run_tests target.
Change times/Makefile to use RUN_TESTS call with destructive test list
as an argument instead of using its own RUN_TESTS target.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Suppress "cd" output from run_tests while running tests to declutter the
test results.
Running efivarfs test:
make --silent -C tools/testing/selftests/efivarfs/ run_tests
Before the change:
skip all tests: must be run as root
selftests: efivarfs.sh [PASS]
/lkml/linux-kselftest/tools/testing/selftests/efivarfs
After the change:
skip all tests: must be run as root
selftests: efivarfs.sh [PASS]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When a test is skipped, instead of using a special exit code of 4, treat
it as pass condition and use exit code of 0. It makes sense to treat skip
as pass since the test couldn't be run as opposed to a failed test.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
clocksource_list array is defined as char [10][30] so
to initialise it we only have to iterate 10 times.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
- Expression parser enhancements for metrics (Andi Kleen)
- Fix buffer overflow while freeing events in 'perf stat' (Andi Kleen)
- Fix static linking with elfutils's libdf and with libunwind
in Debian/Ubuntu (Konstantin Khlebnikov)
- Tighten detection of BPF events, avoiding matching some other PMU
events such as 'cpu/uops_executed.core,cmask=1/' as a .c source
file that ended up being considered a BPF event (Andi Kleen)
- Add Skylake server uncore JSON vendor events (Andi Kleen)
- Add support for printing new mem_info encodings, including
'perf test' checks (Andi Kleen)
- Really install manpages via 'make install-man' (Konstantin Khlebnikov)
- Fix documentation for perf_event_paranoid and perf_event_mlock_kb
sysctls (Konstantin Khlebnikov)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=FjP/
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.14-20170823' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
- Expression parser enhancements for metrics (Andi Kleen)
- Fix buffer overflow while freeing events in 'perf stat' (Andi Kleen)
- Fix static linking with elfutils's libdf and with libunwind
in Debian/Ubuntu (Konstantin Khlebnikov)
- Tighten detection of BPF events, avoiding matching some other PMU
events such as 'cpu/uops_executed.core,cmask=1/' as a .c source
file that ended up being considered a BPF event (Andi Kleen)
- Add Skylake server uncore JSON vendor events (Andi Kleen)
- Add support for printing new mem_info encodings, including
'perf test' checks (Andi Kleen)
- Really install manpages via 'make install-man' (Konstantin Khlebnikov)
- Fix documentation for perf_event_paranoid and perf_event_mlock_kb
sysctls (Konstantin Khlebnikov)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Lguest seems to be rather unused these days. It has seen only patches
ensuring it still builds the last two years and its official state is
"Odd Fixes".
Remove it in order to be able to clean up the paravirt code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: boris.ostrovsky@oracle.com
Cc: lguest@lists.ozlabs.org
Cc: rusty@rustcorp.com.au
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20170816173157.8633-3-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The test makes a read through a map value pointer, then considers pruning
a branch where the register holds an adjusted map value pointer. It
should not prune, but currently it does.
Signed-off-by: Alexei Starovoitov <ast@fb.com>
[ecree@solarflare.com: added test-name and patch description]
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Writes in straight-line code should not prevent reads from propagating
along jumps. With current verifier code, the jump from 3 to 5 does not
add a read mark on 3:R0 (because 5:R0 has a write mark), meaning that
the jump from 1 to 3 gets pruned as safe even though R0 is NOT_INIT.
Verifier output:
0: (61) r2 = *(u32 *)(r1 +0)
1: (35) if r2 >= 0x0 goto pc+1
R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
2: (b7) r0 = 0
3: (35) if r2 >= 0x0 goto pc+1
R0=inv0 R1=ctx(id=0,off=0,imm=0) R2=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff)) R10=fp0
4: (b7) r0 = 0
5: (95) exit
from 3 to 5: safe
from 1 to 3: safe
processed 8 insns, stack depth 0
Signed-off-by: Edward Cree <ecree@solarflare.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Validate the behavior of the combination of various timestamp socket
options, and ensure consistency across ip, udp, and tcp.
Signed-off-by: Mike Maloney <maloney@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove rtctest_setdate from run_destructive_tests target. Leave it in
TEST_GEN_PROGS_EXTENDED to be included in the install targets.
Suggested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When a test exits with skip exit code of 4, "make run_destructive_tests"
halts testing. Fix run_destructive_tests target to handle error exit codes.
Cc: stable <stable@vger.kernel.org> [4.13+]
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Change default arguments for leap-a-day to always set the time
each iteration (rather then waiting for midnight UTC), and to
only run 10 interations (rather then infinite).
If one wants to wait for midnight UTC, they can use the new -w
flag, and we add a note to the argument help that -i -1 will
run infinitely.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org> [4.13+]
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
There is no need to keep timers tests in sync with external timers
repo. Drop support for !KTEST to support for building and running
timers tests without kselftest framework.
Reference: https://lkml.org/lkml/2017/8/10/952
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Acked-by: John Stultz <john.stultz@linaro.org>
* libunwind-x86_64 must be linked before libunwind
* libunwind requires liblzma
* static libunwind conflicts with static libgcc_eh
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322917247.129799.14247751517961953155.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix feature test for static libdw: link required dependencies. Backends
of libebl are not statically linked thus libdl is required.
In Debian/Ubuntu libdw-dev includes libebl.a starting from 0.166-1.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322916720.129772.7959925864494283854.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix misprint CAP_IOC_LOCK -> CAP_IPC_LOCK. This capability have nothing
to do with raw tracepoints. This part is about bypassing mlock limits.
Sysctl kernel.perf_event_paranoid = -1 allows raw and ftrace function
tracepoints without CAP_SYS_ADMIN.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/150322916080.129746.11285255474738558340.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Target install-man builds them but forget to install.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: af3df2cf17 ("perf tools: Try to build Documentation when installing")
Link: http://lkml.kernel.org/r/150322915300.129715.13645857235229756834.stgit@buzz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add some simple tests to perf test to test data source printing.
v2: Make the tests actually checked for the correct name of Forward
v3: Adjust to new encoding
Committer notes:
Avoid the in place declaration to make this build with older compilers,
for instance, in Debian 7 we get:
tests/mem.c: In function 'test__mem':
tests/mem.c:30:5: error: missing initializer [-Werror=missing-field-initializers]
tests/mem.c:30:5: error: (near initialization for '(anonymous).<anonymous>.mem_snoop') [-Werror=missing-field-initializers]
So just zero a struct, then go on building the unions as needed,
reusing settings from the previous test, i.e. local -> remote, etc.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-5-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add decoding for the new "lvlx" and "snoopx" meminfo fields added
earlier to the kernel so that "perf mem report" and other tools can
print it properly.
v2: Merge with persistent memory patch.
Switch to new bit encoding for each combination.
v3: Switch to generic lvlnum field.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816222156.19953-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add JSON uncore events for Skylake Server to perf.
Based on JSON list V1.01
This is a much fuller list than with earlier uncores, including
more low level (but also harder to understand) events. It does not
include the "experimential" events. The previous
high level metric (LLC_* etc.) are still available when applicable.
C state power events are not included at this point.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20170816220553.GA19463@tassilo.jf.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Avoid adding redundant events while parsing an expression. When we add
an "other" event check first if it already exists.
v2: Fix perf test failure.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-10-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some of the upcoming metrics need more than 8 events. Increase the maximum
number the parser supports.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-9-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enhance the expression parser for more complex metric formulas.
- Support python style IF ELSE operators
- Add an #SMT_On magic variable for formulas that depend on the SMT
status.
Example: 4 *( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else cycles
- Support MIN/MAX operations
Example: min(1 , IDQ.MITE_UOPS / ( UPI * 16 * ( ICACHE.HIT + ICACHE.MISSES ) / 4.0 ) )
This is useful to fix up problems caused by multiplexing.
- Support | & ^ operators
- Minor cleanups and fixes
- Support an \ escape for operators. This allows to specify event names
like c2-residency
- Support @ as an alternative for / to be able to specify pmus without
conflicts with operators (like msr/tsc/ as msr@tsc@)
Example: (cstate_core@c3\\-residency@ / msr@tsc@) * 100
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-8-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an smt_on() function to return if SMT is enabled or disabled. Used
in the next patch.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-7-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf stat -e cpu/uops_executed.core,cmask=1/
would be detected as a BPF source event because the .c matches the .c
source BPF pattern.
v2:
Originally I tried to use lex lookahead, but it doesn't seem to work.
This now extends the BPF pattern to match longer events, but then does
an extra check in the C code to reject BPF matches that do not end with
.c/.o/.obj
This uses REJECT, which makes the flex scanner slower, but that
shouldn't be a big problem for the perf events.
Committer testing:
# perf trace -e write -e /home/acme/bpf/tracepoint.c cat /etc/passwd > /dev/null
0.000 ( 0.006 ms): cat/18485 write(fd: 1, buf: 0x7f59eebe1000, count: 3494 ) ...
0.006 ( ): raw_syscalls:sys_enter:NR 1 (1, 7f59eebe1000, da6, 22, 7f59eebe0010, 0))
0.008 ( ): perf_bpf_probe:_write:(ffffffff9626b2c0))
0.000 ( 0.010 ms): cat/18485 ... [continued]: write()) = 3494
#
It continues doing what was expected, i.e. identifying
/home/acme/bpf/tracepoint.c as a BPF event and activates the clang
machinery to build an eBPF object and then uses sys_bpf() to hook it up
to the raw_syscalls:sys_enter tracepoint, etc.
Andi forgot to add Wang to the CC list, fix it.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170811232634.30465-4-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Fix buffer overflow for:
% perf stat -e msr/tsc/,cstate_core/c7-residency/ true
that causes glibc free list corruption. For some reason it doesn't
trigger in valgrind, but it is visible in AS:
=================================================================
==32681==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x603000003f5c at pc 0x0000005671ef bp 0x7ffdaaac9ac0 sp 0x7ffdaaac9ab0
READ of size 4 at 0x603000003f5c thread T0
#0 0x5671ee in perf_evsel__close_fd util/evsel.c:1196
#1 0x56c57a in perf_evsel__close util/evsel.c:1717
#2 0x55ed5f in perf_evlist__close util/evlist.c:1631
#3 0x4647e1 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:749
#4 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#5 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#6 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#7 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#8 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#9 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#10 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
#11 0x428419 in _start (/home/ak/hle/obj-perf/perf+0x428419)
0x603000003f5c is located 0 bytes to the right of 28-byte region [0x603000003f40,0x603000003f5c)
allocated by thread T0 here:
#0 0x7f0675139020 in calloc (/lib64/libasan.so.3+0xc7020)
#1 0x648a2d in zalloc util/util.h:23
#2 0x648a88 in xyarray__new util/xyarray.c:9
#3 0x566419 in perf_evsel__alloc_fd util/evsel.c:1039
#4 0x56b427 in perf_evsel__open util/evsel.c:1529
#5 0x56c620 in perf_evsel__open_per_thread util/evsel.c:1730
#6 0x461dea in create_perf_stat_counter /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:263
#7 0x4637d7 in __run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:600
#8 0x4648e3 in run_perf_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:767
#9 0x46e1bc in cmd_stat /home/ak/hle/linux-hle-2.6/tools/perf/builtin-stat.c:2785
#10 0x52f83d in run_builtin /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:296
#11 0x52fd49 in handle_internal_command /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:348
#12 0x5300de in run_argv /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:392
#13 0x5308f3 in main /home/ak/hle/linux-hle-2.6/tools/perf/perf.c:530
#14 0x7f0672d13400 in __libc_start_main (/lib64/libc.so.6+0x20400)
The event is allocated with cpus == 1, but freed with cpus == real number
When the evsel close function walks the file descriptors it exceeds the
fd xyarray boundaries and reads random memory.
v2:
Now that xyarrays save their original dimensions we can use these to
iterate the two dimensional fd arrays. Fix some users (close, ioctl) in
evsel.c to use these fields directly. This allows simplifying the code
and dropping quite a few function arguments. Adjust all callers by
removing the unneeded arguments.
The actual perf event reading still uses the original values from the
evsel list.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-2-andi@firstfloor.org
[ Fix up xy_max_[xy]() -> xyarray__max_[xy]() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Save the original array dimensions in xyarrays, so that users can
retrieve them later. Add some inline functions to access these fields.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170811232634.30465-1-andi@firstfloor.org
[ As noticed by Jiri, fix up namespacing: xy__method() -> xyarray__method() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add the missing MADV_HWPOISON (100) and MADV_SOFT_OFFLINE (101) defines which
are needed for an upcoming patch which adds page-deallocation for parisc.
Signed-off-by: Helge Deller <deller@gmx.de>
Pull networking fixes from David Miller:
1) Fix IGMP handling wrt VRF, from David Ahern.
2) Fix timer access to freed object in dccp, from Eric Dumazet.
3) Use kmalloc_array() in ptr_ring to avoid overflow cases which are
triggerable by userspace. Also from Eric Dumazet.
4) Fix infinite loop in unmapping cleanup of nfp driver, from Colin Ian
King.
5) Correct datagram peek handling of empty SKBs, from Matthew Dawson.
6) Fix use after free in TIPC, from Eric Dumazet.
7) When replacing a route in ipv6 we need to reset the round robin
pointer, from Wei Wang.
8) Fix bug in pci_find_pcie_root_port() which was unearthed by the
relaxed ordering changes, from Thierry Redding. I made sure to get
an explicit ACK from Bjorn this time around :-)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (27 commits)
ipv6: repair fib6 tree in failure case
net_sched: fix order of queue length updates in qdisc_replace()
tools lib bpf: improve warning
switchdev: documentation: minor typo fixes
bpf, doc: also add s390x as arch to sysctl description
net: sched: fix NULL pointer dereference when action calls some targets
rxrpc: Fix oops when discarding a preallocated service call
irda: do not leak initialized list.dev to userspace
net/mlx4_core: Enable 4K UAR if SRIOV module parameter is not enabled
PCI: Allow PCI express root ports to find themselves
tcp: when rearming RTO, if RTO time is in past then fire RTO ASAP
net: check and errout if res->fi is NULL when RTM_F_FIB_MATCH is set
ipv6: reset fn->rr_ptr when replacing route
sctp: fully initialize the IPv6 address in sctp_v6_to_addr()
tipc: fix use-after-free
tun: handle register_netdevice() failures properly
datagram: When peeking datagrams with offset < 0 don't skip empty skbs
bpf, doc: improve sysctl knob description
netxen: fix incorrect loop counter decrement
nfp: fix infinite loop on umapping cleanup
...
With '-mtune=atom', which is enabled with CONFIG_MATOM=y, GCC uses some
unusual instructions for setting up the stack.
Instead of:
mov %rsp, %rbp
it does:
lea (%rsp), %rbp
And instead of:
add imm, %rsp
it does:
lea disp(%rsp), %rsp
Add support for these instructions to the objtool decoder.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/4ea1db896e821226efe1f8e09f270771bde47e65.1501188854.git.jpoimboe@redhat.com
[ This is a cherry-picked version of upcoming commit 5b8de48e82. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Eric Leblond <eric@regit.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
New device support:
* ak8974
- support the AMI306.
* st_magnetometer
- add support for the LIS2MDL with bindings.
* rockchip-saradc
- add binding for rv1108 SoC (no driver change).
* srf08
- add srf02 (i2c only) and srf10 support.
* stm32-timer
- support for the STM32H7 to existing driver.
Features:
* tools
- move over to the tools buildsystem rather than hand rolling.
- add an install section to the build.
* ak8974
- use serial number to add device randomness.
- add AMI306 calibration data output.
* ccs811
- triggered buffer support.
* srf08
- add a device tree table as the old style i2c probing is going away,
- add triggered buffer support
* st32-adc
- add optional st,min-sample-time-nsecs binding to allow control of
sampling against analog circuitry.
* stm32-timer
- add output compare triggers.
* ti-ads1015
- add threshold event support.
* ti-ads7950
- Allow use on ACPI platforms including providing a default reference
voltage as there is no way to obtain this on ACPI currently.
Cleanup and fixes:
* ad7606
- fix an error return code in probe.
* ads1015
- fix incorrect data rate setting update when capture in progress,
- fix wrong scale information for the ADS1115,
- make conversions work when CONFIG_PM is not set,
- make sure we don't get a stale result after a runtime resume by
ensuring we wait long enough,
- avoid returning a false error form the buffer setup callbacks,
- add enough wait time to get the correct conversion,
- remove an unnecessary config register update,
- add a helper to set conversion mode reducing repeated boilerplate,
- use devm_iio_triggered_buffer_setup to simplify error and remove
paths,
- use iio_device_claim_direct_mode instead of opencoding the same.
* ak8974
- mark the INT_CLEAR register as precious to prevent debugfs access.
* apds9300
- constify the i2c_device_id.
* at91-sama5 adc
- add missing Kconfig dependency.
* bma180 accel
- constify the i2c_device_id.
* rockchip_saradc
- explicitly request exclusive reset control as part of the reset rework
on going throughout the kernel.
* st_accel
- fix drdy configuration for a load of accelerometers that only have
the int1 line. Fix is unimportant as presumably no deviec tree actually
used the non existent hardware line.
* st_pressure
- fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
as they don't have this. Fix is unimportant as presumably no device tree
actually used the non existent hardware line.
* stm32-dac
- explicitly request exclusive reset control (part of reset being reworked).
* tsl2583
- constify the i2c_device_id.
* xadc
- coding style fixes.
-----BEGIN PGP SIGNATURE-----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=b6g8
-----END PGP SIGNATURE-----
Merge tag 'iio-for-4.14b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanup for the 4.14 cycle.
New device support:
* ak8974
- support the AMI306.
* st_magnetometer
- add support for the LIS2MDL with bindings.
* rockchip-saradc
- add binding for rv1108 SoC (no driver change).
* srf08
- add srf02 (i2c only) and srf10 support.
* stm32-timer
- support for the STM32H7 to existing driver.
Features:
* tools
- move over to the tools buildsystem rather than hand rolling.
- add an install section to the build.
* ak8974
- use serial number to add device randomness.
- add AMI306 calibration data output.
* ccs811
- triggered buffer support.
* srf08
- add a device tree table as the old style i2c probing is going away,
- add triggered buffer support
* st32-adc
- add optional st,min-sample-time-nsecs binding to allow control of
sampling against analog circuitry.
* stm32-timer
- add output compare triggers.
* ti-ads1015
- add threshold event support.
* ti-ads7950
- Allow use on ACPI platforms including providing a default reference
voltage as there is no way to obtain this on ACPI currently.
Cleanup and fixes:
* ad7606
- fix an error return code in probe.
* ads1015
- fix incorrect data rate setting update when capture in progress,
- fix wrong scale information for the ADS1115,
- make conversions work when CONFIG_PM is not set,
- make sure we don't get a stale result after a runtime resume by
ensuring we wait long enough,
- avoid returning a false error form the buffer setup callbacks,
- add enough wait time to get the correct conversion,
- remove an unnecessary config register update,
- add a helper to set conversion mode reducing repeated boilerplate,
- use devm_iio_triggered_buffer_setup to simplify error and remove
paths,
- use iio_device_claim_direct_mode instead of opencoding the same.
* ak8974
- mark the INT_CLEAR register as precious to prevent debugfs access.
* apds9300
- constify the i2c_device_id.
* at91-sama5 adc
- add missing Kconfig dependency.
* bma180 accel
- constify the i2c_device_id.
* rockchip_saradc
- explicitly request exclusive reset control as part of the reset rework
on going throughout the kernel.
* st_accel
- fix drdy configuration for a load of accelerometers that only have
the int1 line. Fix is unimportant as presumably no deviec tree actually
used the non existent hardware line.
* st_pressure
- fix drdy configuration for LPS22HB and LPS25H by dropping int2 support
as they don't have this. Fix is unimportant as presumably no device tree
actually used the non existent hardware line.
* stm32-dac
- explicitly request exclusive reset control (part of reset being reworked).
* tsl2583
- constify the i2c_device_id.
* xadc
- coding style fixes.
Pull timekeepig updates from John Stultz
- kselftest improvements
- Use the proper timekeeper in the debug code
- Prevent accessing an unavailable wakeup source in the alarmtimer sysfs
interface.
This patch makes the needed changes to allow each process of
the INNER_LRU_HASH_PREALLOC test to provide its numa node id
when creating the lru map.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The descriptions were reversed, correct this.
Link: http://lkml.kernel.org/r/20170809234635.13443-4-mcgrof@kernel.org
Fixes: 64b671204a ("test_sysctl: add generic script to expand on tests")
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Reported-by: Daniel Mentz <danielmentz@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Colin Ian King <colin.king@canonical.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: David Binderman <dcb314@hotmail.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Matt Redfearn <matt.redfearn@imgetc.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Michal Marek <mmarek@suse.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using the existing 't' hotkey, support the three views: percent, total
period and number of samples on the annotate TUI browser, circulating
them like below:
Percent -> Total Period -> Nr Samples -> Percent ...
Committer notes:
Removed new 'e' hotkey, should be resubmitted as a separate patch, with
proper justification for its inclusion.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/1503046028-5691-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support the --show-nr-samples in the TUI browser.
Committer notes:
Lift the restriction about --tui but leave it for --gtk:
$ export LD_LIBRARY_PATH=~/lib64
$ perf annotate --gtk --show-nr-samples --show-nr-samples is not available in --gtk mode at this time
$
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1503046023-5646-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the --show-total-period option was introduced we forgot to add an
entry in the man page, fix it.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Fixes: 0c4a5bcea4 ("perf annotate: Display total number of samples with --show-total-period")
Link: http://lkml.kernel.org/r/1503046013-5555-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --show-nr-samples option to "perf annotate" so that it matches "perf
report".
Committer note:
Note that it can't be used together with --show-total-period, which
seems like a silly limitation, that can be lifted at some point.
Made it bail out if not on --stdio.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1503046008-5511-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Several architectures don't need to define it since the string is the
same as the default one, so nuke them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-v1e1jr1u474w9xcelpaoxamu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since 1955643902 ("perf_counter: kerneltop: simplify data_head read")
we do not use it, and this was way back in 2009, remove it before some
other arch maintainer adds its implementation, like so many did,
needlessly :-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3l2su9c58eaq4twjzrf9uu08@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Calling them just "data" is too vague, call it 'perf_state', to make it
clearer, for instance, when looking at patch hunks.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-rnhk5yb05wem77rjpclrh7so@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andi reported problems when parse errors were detected with vendor
events (json), because in the yyparse/parse_events_parse function we
dereferenced the _data parameter to two different structs, with
different layouts, which ended up making parse_events_evlist->error to
point to random stack addresses.
Fix it by making _data to always be struct parse_events_state, changing
the only place where 'struct parse_events_term' was used in
parse_events.y.
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bc27lshz823hxl8n9nkelcgh@git.kernel.org
Fixes: 90e2b22dee ("perf/tool: Add support to reuse event grammar to parse out terms")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename it from 'parse_events_evlist' to 'parse_events_state' to better
state that this is parsing state that has to be passed around.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dursqtg2h2w98ztaa297u43x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Those are just casting a void pointer to a struct to then pass them to
functions, i.e. remove the local variables and pass the void pointer
directly, the casting will be done and the code will be shorter.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bzfodzr3mb46gy7u7v0mqad6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We need to consider the null terminator, oops, fix it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 017037ff3d ("perf trace: Allow specifying list of syscalls and events in -e/--expr/--event")
Link: http://lkml.kernel.org/n/tip-j79jpqqe91gvxqmsgxgfn2ni@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Skylake server uncore IIO events need new FCMask/PortMask fields. Support
those in the json parser and pass it through as a filter.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20170816220201.19182-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Makefile verifies the same file exists twice:
test -f ../../../include/uapi/linux/bpf.h -a \
-f ../../../include/uapi/linux/bpf.h
The purpose of the check is to ensure the diff (immediately after the
test) doesn't fail with these two files:
tools/include/uapi/linux/bpf.h
include/uapi/linux/bpf.h
Same recipe for bpf_common:
test -f ../../../include/uapi/linux/bpf_common.h -a \
-f ../../../include/uapi/linux/bpf_common.h
This corrects the location of the tests.
Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1502814810-960-1-git-send-email-daniel.diaz@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These testcases are motivated by a recent alarmtimer regression, which
caused one-shot CLOCK_{BOOTTIME,REALTIME}_ALARM timers to become
periodic timers.
The new testcases are very similar to the existing testcases for
repeating timers. But rather than waiting for 5 alarms, they wait for 5
seconds and verify that the alarm fired exactly once.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Rather than printing an error inside the alarm signal handler, set a
flag that we check later. This keeps the test from spamming the console
every time the alarm fires early. It also fixes the test exiting with
error code 0 if this was the only test failure.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Fixes the following build warning:
freq-step.c: In function ‘main’:
freq-step.c:271:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
By returning the return values from ksft_success/fail.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
On some systems, the kernel headers haven't been updated to include
ADJ_SETOFFSET, so define it in the test if needed.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
The actual use of TASKS_RCU is only when PREEMPT, otherwise RCU-sched
is used instead. This commit therefore makes synchronize_rcu_tasks()
and call_rcu_tasks() available always, but mapped to synchronize_sched()
and call_rcu_sched(), respectively, when !PREEMPT. This approach also
allows some #ifdefs to be removed from rcutorture.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
The tm-resched-dscr self test can, in some situations, run for
several minutes before being successfully interrupted by the context
switch it needs in order to perform the test. This often seems to
occur when the test is being run in a virtual machine.
Improve the test by running it under eat_cpu() to guarantee
contention for the CPU and increase the chance of a context switch.
In practice this seems to reduce the test time, in some cases, from
more than two minutes to under a second.
Also remove the "progress dots" so that if the test does run for a
long time, it doesn't produce large amounts of unnecessary output.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
New features:
- Support exporting Intel PT data to sqlite3 with python perf scripts,
this is in addition to the postgresql support that was already there (Adrian Hunter)
Infrastructure:
- Handle perf tool builds with less features in perf shell tests, such
as those with NO_LIBDWARF=1 or even without 'perf probe' (Arnaldo Carvalho de Melo)
- Replace '|&' with '2>&1 |' to work with more shells in the just
introduced perf test shell harness (Kim Phillips)
Architecture related fixes:
- Fix endianness problem when loading parameters in the BPF prologue
generated by perf, noticed using 'perf test BPF' in s390x systems (Wang Nan, Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----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=I7uv
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-4.14-20170816' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf core improvements and fixes:
New features:
- Support exporting Intel PT data to sqlite3 with python perf scripts,
this is in addition to the postgresql support that was already there (Adrian Hunter)
Infrastructure changes:
- Handle perf tool builds with less features in perf shell tests, such
as those with NO_LIBDWARF=1 or even without 'perf probe' (Arnaldo Carvalho de Melo)
- Replace '|&' with '2>&1 |' to work with more shells in the just
introduced perf test shell harness (Kim Phillips)
Architecture related fixes:
- Fix endianness problem when loading parameters in the BPF prologue
generated by perf, noticed using 'perf test BPF' in s390x systems (Wang Nan, Thomas Richter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The rtc-generic and opal-rtc are failing to run this test as they do not
support all the features. Let's treat the error returns and skip to the
following test.
Theoretically the test_DATE should be also adjusted, but as it's enabled
on demand I think it makes sense to fail in such case.
Signed-off-by: Lukáš Doktor <ldoktor@redhat.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
For only one online cpu case, 'make run_tests' try to offline the cpu0 that will
always fail since the host can't offline this unique online cpu.
this patch will skip the test to avoid this failure.
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Previously, 'make run_tests -C cpu-hotplug' always PASS since cpu-on-off-test.sh
always exits 0 even though the test got some unexpected errors like below:
root@debian9:/home/lizhijian/chroot/linux/tools/testing/selftests/cpu-hotplug# make run_tests
pid 878's current affinity mask: 1
pid 878's new affinity mask: 1
CPU online/offline summary:
Cpus in online state: 0
Cpus in offline state: 0
Limited scope test: one hotplug cpu
(leaves cpu in the original state):
online to offline to online: cpu 0
./cpu-on-off-test.sh: line 83: /sys/devices/system/cpu/cpu0/online: Permission denied
offline_cpu_expect_success 0: unexpected fail
./cpu-on-off-test.sh: line 78: /sys/devices/system/cpu/cpu0/online: Permission denied
online_cpu_expect_success 0: unexpected fail
selftests: cpu-on-off-test.sh [PASS]
after this patch, the test will exit with failure once it occurs some unexpected behaviors
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Convert test to use ksft TAP13 framework to print user friendly
test output which is consistent across kselftest suite.
Acked-by: Darren Hart (VMware) <dvhart@infradead.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Since we do not specify bash (and/or zsh) as a requirement, use the
standard error redirection that is more widely supported.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Link: http://lkml.kernel.org/n/tip-ji5mhn3iilgch3eaay6csr6z@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This generates a set of sockets, attaches BPF programs, and sends some
simple traffic using basic send/recv pattern. Additionally, we do a bunch
of negative tests to ensure adding/removing socks out of the sockmap fail
correctly.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds tests to access new __sk_buff members from sk skb program
type.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This program binds a program to a cgroup and then matches hard
coded IP addresses and adds these to a sockmap.
This will receive messages from the backend and send them to
the client.
client:X <---> frontend:10000 client:X <---> backend:10001
To keep things simple this is only designed for 1:1 connections
using hard coded values. A more complete example would allow many
backends and clients.
To run,
# sockmap <cgroup2_dir>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently this warning is triggered when compiling hv_fcopy_daemon:
hv_fcopy_daemon.c:216:4: warning: dereferencing type-punned pointer will break
strict-aliasing rules [-Wstrict-aliasing]
kernel_modver = *(__u32 *)buffer;
Convert the send/receive buffer to a union and pass individual members as
needed. This also gives the correct size for the buffer.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase buffer size so that "_{-INT_MAX}" will fit.
Spotted by the gcc7 snprintf checker.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since a loop device is backed by a file, a backup will already result in
its parent filesystem being frozen. It's sufficient to just freeze the
parent filesystem, so we can skip the loop device.
This avoids a situation where a loop device and its parent filesystem are
both frozen and then thawed out of order. For example, if the loop device
is enumerated first, we would thaw it while its parent filesystem is still
frozen. The thaw operation fails and the loop device remains frozen.
Signed-off-by: Alex Ng <alexng@messages.microsoft.com>
Signed-off-by: Vyronas Tsingaras <vyronas@vtsingaras.me>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Perf's BPF prologue generator unconditionally fetches 8 bytes for
function parameters, which causes problems on big endian machines. Thomas
gives a detailed analysis for this problem:
http://lkml.kernel.org/r/968ebda5-abe4-8830-8d69-49f62529d151@linux.vnet.ibm.com
---- 8< ----
I investigated perf test BPF for s390x and have a question regarding
the 38.3 subtest (bpf-prologue test) which fails on s390x.
When I turn on trace_printk in tests/bpf-script-test-prologue.c
I see this output in /sys/kernel/debug/tracing/trace:
[root@s8360047 perf]# cat /sys/kernel/debug/tracing/trace
perf-30229 [000] d..2 170161.535791: : f_mode 2001d00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535809: : f_mode 6001f00000000 offset:0 orig:0
perf-30229 [000] d..2 170161.535815: : f_mode 6001f00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535819: : f_mode 2001d00000000 offset:1 orig:0
perf-30229 [000] d..2 170161.535822: : f_mode 2001d00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535825: : f_mode 6001f00000000 offset:2 orig:1
perf-30229 [000] d..2 170161.535828: : f_mode 6001f00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535832: : f_mode 2001d00000000 offset:3 orig:1
perf-30229 [000] d..2 170161.535835: : f_mode 2001d00000000 offset:4 orig:0
perf-30229 [000] d..2 170161.535841: : f_mode 6001f00000000 offset:4 orig:0
[...]
There are 3 parameters the eBPF program tests/bpf-script-test-prologue.c
accesses: f_mode (member of struct file at offset 140) offset and orig. They
are parameters of the lseek() system call triggered in this test case in
function llseek_loop().
What is really strange is the value of f_mode. It is an 8 byte value, whereas
in the probe event it is defined as a 4 byte value. The lower 4 bytes are all
zero and do not belong to member f_mode. The correct value should be 2001d for
read-only and 6001f for read-write open mode.
Here is the output of the 'perf test -vv bpf' trace:
Try to find probe point from debuginfo.
Matched function: null_lseek [2d9310d]
Probe point found: null_lseek+0
Searching 'file' variable in context.
Converting variable file into trace event.
converting f_mode in file
f_mode type is unsigned int.
Opening /sys/kernel/debug/tracing//README write=0
Searching 'offset' variable in context.
Converting variable offset into trace event.
offset type is long long int.
Searching 'orig' variable in context.
Converting variable orig into trace event.
orig type is int.
Found 1 probe_trace_events.
Opening /sys/kernel/debug/tracing//kprobe_events write=1
Writing event: p:perf_bpf_probe/func _text+8794224 f_mode=+140(%r2):x32
---- 8< ----
This patch parses the type of each argument and converts data from memory to
expected type.
Now the test runs successfully on 4.13.0-rc5:
[root@s8360046 perf]# ./perf test bpf
38: BPF filter :
38.1: Basic BPF filtering : Ok
38.2: BPF pinning : Ok
38.3: BPF prologue generation : Ok
38.4: BPF relocation checker : Ok
[root@s8360046 perf]#
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20170815092159.31912-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for SQLite 3 to the call-graph-from-sql.py script. The SQL
statements work as is, so just detect the database type by checking if the
SQLite 3 file exists.
Committer notes:
Tested collecting the PT data on a RHEL7.4, generating the SQLite3
database there and then moving it to a Fedora 26 system where the
call-graph-from-sql.py script was run, using python-pyside version
1.2.2-7fc26 to see the callgraphs using Qt4.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1501749090-20357-6-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This update consists of important compile and run-time error fixes to
timers/freq-step, kmod, and sysctl tests.
-----BEGIN PGP SIGNATURE-----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=ZTw2
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-4.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"This update consists of important compile and run-time error fixes to
timers/freq-step, kmod, and sysctl tests"
* tag 'linux-kselftest-4.13-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: timers: freq-step: fix compile error
selftests: futex: fix run_tests target
test_sysctl: fix sysctl.sh by making it executable
test_kmod: fix kmod.sh by making it executable
Add support for exporting to SQLite 3 the same data as the PostgreSQL
export.
Committer note:
Tested on RHEL 7.4 using the 1.2.2-4el python-pyside packages from EPEL.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/r/1501749090-20357-4-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The export does not work if only branches are exported because of a
missing column in the samples table. Fix by adding the missing
call_path_id.
Fixes: 3521f3bc9d ("perf script: Update export-to-postgresql to support callchain export")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: http://lkml.kernel.org/r/1501749090-20357-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If that is the case, or if the required lib is not present, e.g.
elfutils-devel in Fedora systems, then just skip the tests requiring
DWARF analysis.
Before:
# rpm -e elfutils-devel
# perf test ping vfs_getname
60: Use vfs_getname probe to get syscall args filenames : FAILED!
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: FAILED!
63: Add vfs_getname probe to get syscall args filenames : FAILED!
#
After:
# perf test vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Skip
62: Check open filename arg using perf trace + vfs_getname: Skip
63: Add vfs_getname probe to get syscall args filenames : Skip
#
Then, reinstalling elfutils-devel, rebuilding the tool and running
again:
# perf test vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-d67tvn401fxrwr97pu5ihfb1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a library function that checks if 'perf probe' is built into the
tool being tested, skipping tests that need it.
Testing it on a system after removing the library needed to build
'probe' as a perf subcommand:
# perf test ping vfs_getname
59: Use vfs_getname probe to get syscall args filenames : Skip
60: probe libc's inet_pton & backtrace it with ping : Skip
61: Check open filename arg using perf trace + vfs_getname: Skip
62: Add vfs_getname probe to get syscall args filenames : Skip
# perf probe
perf: 'probe' is not a perf-command. See 'perf --help'.
#
Now reinstalling elfutils-libelf-devel on this Fedora 26 system to
rebuild perf and then retest this:
# perf test ping vfs_getname
60: Use vfs_getname probe to get syscall args filenames : Ok
61: probe libc's inet_pton & backtrace it with ping : Ok
62: Check open filename arg using perf trace + vfs_getname: Ok
63: Add vfs_getname probe to get syscall args filenames : Ok
#
Reported-by: Kim Phillips <kim.phillips@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ctdck2gzsskqhjzu3ebb62zm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3zxjswdbs2au3ih0rino0iy1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This verifies that SECCOMP_RET_KILL_PROCESS is higher priority than
SECCOMP_RET_KILL_THREAD. (This also moves a bunch of defines up earlier
in the file to use them earlier.)
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
In preparation for adding SECCOMP_RET_KILL_PROCESS, rename SECCOMP_RET_KILL
to the more accurate SECCOMP_RET_KILL_THREAD.
The existing selftest values are intentionally left as SECCOMP_RET_KILL
just to be sure we're exercising the alias.
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new action, SECCOMP_RET_LOG, that logs a syscall before allowing
the syscall. At the implementation level, this action is identical to
the existing SECCOMP_RET_ALLOW action. However, it can be very useful when
initially developing a seccomp filter for an application. The developer
can set the default action to be SECCOMP_RET_LOG, maybe mark any
obviously needed syscalls with SECCOMP_RET_ALLOW, and then put the
application through its paces. A list of syscalls that triggered the
default action (SECCOMP_RET_LOG) can be easily gleaned from the logs and
that list can be used to build the syscall whitelist. Finally, the
developer can change the default action to the desired value.
This provides a more friendly experience than seeing the application get
killed, then updating the filter and rebuilding the app, seeing the
application get killed due to a different syscall, then updating the
filter and rebuilding the app, etc.
The functionality is similar to what's supported by the various LSMs.
SELinux has permissive mode, AppArmor has complain mode, SMACK has
bring-up mode, etc.
SECCOMP_RET_LOG is given a lower value than SECCOMP_RET_ALLOW as allow
while logging is slightly more restrictive than quietly allowing.
Unfortunately, the tests added for SECCOMP_RET_LOG are not capable of
inspecting the audit log to verify that the syscall was logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if action == RET_LOG && RET_LOG in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new filter flag, SECCOMP_FILTER_FLAG_LOG, that enables logging for
all actions except for SECCOMP_RET_ALLOW for the given filter.
SECCOMP_RET_KILL actions are always logged, when "kill" is in the
actions_logged sysctl, and SECCOMP_RET_ALLOW actions are never logged,
regardless of this flag.
This flag can be used to create noisy filters that result in all
non-allowed actions to be logged. A process may have one noisy filter,
which is loaded with this flag, as well as a quiet filter that's not
loaded with this flag. This allows for the actions in a set of filters
to be selectively conveyed to the admin.
Since a system could have a large number of allocated seccomp_filter
structs, struct packing was taken in consideration. On 64 bit x86, the
new log member takes up one byte of an existing four byte hole in the
struct. On 32 bit x86, the new log member creates a new four byte hole
(unavoidable) and consumes one of those bytes.
Unfortunately, the tests added for SECCOMP_FILTER_FLAG_LOG are not
capable of inspecting the audit log to verify that the actions taken in
the filter were logged.
With this patch, the logic for deciding if an action will be logged is:
if action == RET_ALLOW:
do not log
else if action == RET_KILL && RET_KILL in actions_logged:
log
else if filter-requests-logging && action in actions_logged:
log
else if audit_enabled && process-is-being-audited:
log
else:
do not log
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Userspace needs to be able to reliably detect the support of a filter
flag. A good way of doing that is by attempting to enter filter mode,
with the flag bit(s) in question set, and a NULL pointer for the args
parameter of seccomp(2). EFAULT indicates that the flag is valid and
EINVAL indicates that the flag is invalid.
This patch adds a selftest that can be used to test this method of
detection in userspace.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Userspace code that needs to check if the kernel supports a given action
may not be able to use the /proc/sys/kernel/seccomp/actions_avail
sysctl. The process may be running in a sandbox and, therefore,
sufficient filesystem access may not be available. This patch adds an
operation to the seccomp(2) syscall that allows userspace code to ask
the kernel if a given action is available.
If the action is supported by the kernel, 0 is returned. If the action
is not supported by the kernel, -1 is returned with errno set to
-EOPNOTSUPP. If this check is attempted on a kernel that doesn't support
this new operation, -1 is returned with errno set to -EINVAL meaning
that userspace code will have the ability to differentiate between the
two error cases.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Suggested-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Kees Cook <keescook@chromium.org>
This refactors the errno tests (since they all use the same pattern for
their filter) and adds a RET_DATA field ordering test.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
This attempts to produce a comparison between native getpid() and a
RET_ALLOW-filtered getpid(), to measure the overhead cost of using
seccomp().
Signed-off-by: Kees Cook <keescook@chromium.org>
This adds tests for using only ptrace to perform syscall changes, just
to validate matching behavior between seccomp events and ptrace events.
Signed-off-by: Kees Cook <keescook@chromium.org>
Kernel test robot reports error when running test_xdp_redirect.sh.
Check if ip tool supports xdpgeneric, if not, skip the test.
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Installs a probe on libc's inet_pton function, that will use uprobes,
then use 'perf trace' on a ping to localhost asking for just one packet
with the a backtrace 3 levels deep, check that it is what we expect.
This needs no debuginfo package, all is done using the libc ELF symtab
and the CFI info in the binaries.
Testing it:
# perf test ping
61: probe libc's inet_pton & backtrace it with ping : Ok
In verbose mode:
# perf test -v ping
61: probe libc's inet_pton & backtrace it with ping :
--- start ---
test child forked, pid 1007
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7f75fce12a20))
__GI___inet_pton (/usr/lib64/libc-2.24.so)
getaddrinfo (/usr/lib64/libc-2.24.so)
_init (/usr/bin/ping)
test child finished with 0
---- end ----
probe libc's inet_pton & backtrace it with ping: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-idrntt4nbg15aafu8hjmv7sk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf report' tool does not display the addresses of kernel module
symbols correctly.
For example symbol qeth_send_ipa_cmd in kernel module qeth.ko has this
relative address for function qeth_send_ipa_cmd():
[root@s8360047 linux]# nm -g drivers/s390/net/qeth.ko | fgrep send_ipa_cmd
0000000000013088 T qeth_send_ipa_cmd
The module is loaded at address:
[root@s8360047 linux]# cat /sys/module/qeth/sections/.text
0x000003ff80296d20
[root@s8360047 linux]#
This should result in a start address of:
0x13088 + 0x3ff80296d20 = 0x3ff802a9da8
Using crash to verify the address on a live system:
[root@s8360046 linux]# crash vmlinux
crash 7.1.9++
Copyright (C) 2002-2016 Red Hat, Inc.
Copyright (C) 2004, 2005, 2006, 2010 IBM Corporation
[...]
crash> mod -s qeth drivers/s390/net/qeth.ko
MODULE NAME SIZE OBJECT FILE
3ff8028d700 qeth 151552 drivers/s390/net/qeth.ko
crash> sym qeth_send_ipa_cmd
3ff802a9da8 (T) qeth_send_ipa_cmd [qeth] /root/linux/drivers/s390/net/qeth_core_main.c: 2944
crash>
Now perf report displays the address of symbol qeth_send_ipa_cmd:
symbol__new:
qeth_send_ipa_cmd 0x130f0-0x132ce
There is a difference of 0x68 between the entry in the symbol table (see
nm command above) and perf. The difference is from the offset the .text
segment of qeth.ko:
[root@s8360047 perf]# readelf -a drivers/s390/net/qeth.ko
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
[ 0] NULL 0000000000000000 00000000
0000000000000000 0000000000000000 0 0 0
[ 1] .note.gnu.build-i NOTE 0000000000000000 00000040
0000000000000024 0000000000000000 A 0 0 4
[ 2] .text PROGBITS 0000000000000000 00000068
000000000001c8a0 0000000000000000 AX 0 0 8
As seen the .text segment has an offset of 0x68 with start address 0x0.
Therefore 0x68 is added to the address of qeth_send_ipa_cmd and thus
0x13088 + 0x68 = 0x130f0 is displayed.
This is wrong, perf report needs to display the start address of symbol
qeth_send_ipa_cmd at 0x13088 + qeth.ko.text section start address.
The qeth.ko module .text start address is available in the qeth.ko DSO
map. Just identify the kernel module symbols and correct the addresses.
With the fix I see this correct address for symbol: symbol__new:
qeth_send_ipa_cmd 0x3ff802a9da8-0x3ff802a9f86
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-1-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-q8lktlpoxb5e3dj52u1s1rw4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During work on perf report for s390 I ran into the following issue:
0 0x318 [0x78]: PERF_RECORD_MMAP -1/0:
[0x3ff804d6990(0xfffffc007fb2966f) @ 0]:
x /lib/modules/4.12.0perf1+/kernel/drivers/s390/net/qeth_l2.ko
This is a PERF_RECORD_MMAP entry of the perf.data file with an invalid
module size for qeth_l2.ko (the s390 ethernet device driver).
Even a mainframe does not have 0xfffffc007fb2966f bytes of main memory.
It turned out that this wrong size is created by the perf record
command. What happens is this function call sequence from
__cmd_record():
perf_session__new():
perf_session__create_kernel_maps():
machine__create_kernel_maps():
machine__create_modules(): Creates map for all loaded kernel modules.
modules__parse(): Reads /proc/modules and extracts module name and
load address (1st and last column)
machine__create_module(): Called for every module found in /proc/modules.
Creates a new map for every module found and enters
module name and start address into the map. Since the
module end address is unknown it is set to zero.
This ends up with a kernel module map list sorted by module start
addresses. All module end addresses are zero.
Last machine__create_kernel_maps() calls function map_groups__fixup_end().
This function iterates through the maps and assigns each map entry's
end address the successor map entry start address. The last entry of the
map group has no successor, so ~0 is used as end to consume the remaining
memory.
Later __cmd_record calls function record__synthesize() which in turn calls
perf_event__synthesize_kernel_mmap() and perf_event__synthesize_modules()
to create PERF_REPORT_MMAP entries into the perf.data file.
On s390 this results in the last module qeth_l2.ko
(which has highest start address, see module table:
[root@s8360047 perf]# cat /proc/modules
qeth_l2 86016 1 - Live 0x000003ff804d6000
qeth 266240 1 qeth_l2, Live 0x000003ff80296000
ccwgroup 24576 1 qeth, Live 0x000003ff80218000
vmur 36864 0 - Live 0x000003ff80182000
qdio 143360 2 qeth_l2,qeth, Live 0x000003ff80002000
[root@s8360047 perf]# )
to be the last entry and its map has an end address of ~0.
When the PERF_RECORD_MMAP entry is created for kernel module qeth_l2.ko
its start address and length is written. The length is calculated in line:
event->mmap.len = pos->end - pos->start;
and results in 0xffffffffffffffff - 0x3ff804d6990(*) = 0xfffffc007fb2966f
(*) On s390 the module start address is actually determined by a __weak function
named arch__fix_module_text_start() in machine__create_module().
I think this improvable. We can use the module size (2nd column of /proc/modules)
to get each loaded kernel module size and calculate its end address.
Only for map entries which do not have a valid end address (end is still zero)
we can use the heuristic we have now, that is use successor start address or ~0.
Signed-off-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Cc: Zvonko Kosic <zvonko.kosic@de.ibm.com>
LPU-Reference: 20170803134902.47207-2-tmricht@linux.vnet.ibm.com
Link: http://lkml.kernel.org/n/tip-nmoqij5b5vxx7rq2ckwu8iaj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we get a non-null, but empty, string for the filename from
bfd. This then results in srclines of the form ":0", which is different
from the canonical SRCLINE_UNKNOWN in the form "??:0". Set the file to
NULL if it is empty to fix this.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-14-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The input string is not modified and thus can be passed in as a pointer
to const data.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/20170806212446.24925-3-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf trace' using 'touch' to write to a temp
file, then checks that that was captured by the vfs_getname was used by
'perf trace', that already handles "probe:vfs_getname" if present, and
used in the "open" syscall "filename" argument beautifier.
Testing it:
# perf test "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname: Ok
#
# perf test -v "trace + vfs_getname"
61: Check open filename arg using perf trace + vfs_getname:
--- start ---
test child forked, pid 30846
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
2.237 ( 0.012 ms): touch/30855 open(filename: /tmp/temporary_file.kmoWQ, flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3
test child finished with 0
---- end ----
Check open filename arg using perf trace + vfs_getname: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-j02nobfvvn9c7yrphdsnbqx0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test uses the 'perf test shell' library to add probe:vfs_getname to the
system then use it with 'perf record' using 'touch' to write to a temp file,
then checks that that was captured by the vfs_getname probe in the generated
perf.data file, with the temp file name as the pathname argument.
Using it:
# perf test "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames: Ok
# perf test -v "Use vfs_getname"
60: Use vfs_getname probe to get syscall args filenames:
--- start ---
test child forked, pid 16414
Added new event:
probe:vfs_getname (on getname_flags:72 with pathname=result->name:string)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_getname -aR sleep 1
Recording open file:
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.022 MB /tmp/vaca.perf.data.QZsn7 (13 samples) ]
Looking at perf.data file for vfs_getname records for the file we touched:
touch 16421 [002] 1255152.879561: probe:vfs_getname: (ffffffffa626e608) pathname="/tmp/vaca.l10SL"
test child finished with 0
---- end ----
Use vfs_getname probe to get syscall args filenames: Ok
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-t555fnhbcbxnukltk23dqxur@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Multiple tests will be able to reuse these functions, to test things
like perf report, 'trace', etc, using this probe.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-48xagvozhouhyi8fjota6o2d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
