Commit Graph

25 Commits

Author SHA1 Message Date
Christoph Hellwig
ce65d36f3e sparc: remove the sparc32_dma_ops indirection
There is no good reason to have a double indirection for the sparc32
dma ops, so remove the sparc32_dma_ops and define separate dma_map_ops
instance for the different IOMMU types.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>
2018-12-11 14:45:29 +01:00
Greg Kroah-Hartman
b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Sam Ravnborg
6e6e41879e sparc32: fix build with STRICT_MM_TYPECHECKS
Based on recent thread on linux-arch (some weeks ago) I
decided to check how much work was required to build sparc32
with STRICT_MM_TYPECHECKS enabled.

The resulting binary (checked srmmu.o) was to my suprise smaller with
STRICT_MM_TYPECHECKS defined, than without.

As I have no working gear to test sparc32 bits at for the moment,
I did not enable STRICT_MM_TYPECHECKS - but was tempeted to do so.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20 17:55:42 -07:00
Sam Ravnborg
1918660b90 sparc32: fix sparse warning in io-unit.c
Fix following warning:
io-unit.c:56:13: warning: incorrect type in assignment (different address spaces)

The page table for the io unit resides in __iomem.
Fix up all users of the io unit page table.
Introduce sbus helers for all read/write operations.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-18 19:01:26 -07:00
David S. Miller
d894d964ff sparc32: Convert mmu_* interfaces from btfixup to method ops.
This set of changes displays one major danger of btfixup, interface
signatures are not always type checked fully.  As seen here the iounit
variant of the map_dma_area routine had an incorrect type for one of
it's arguments.

It turns out to be harmless in this case, but just imagine trying to
debug something involving this kind of problem.  No thanks.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 13:57:05 -07:00
David S. Miller
679bea5e43 sparc: Kill mmu_{un,}lockarea().
These were used on sun4c during floppy data transfers since on that
chip we had to lock the cpu mappings into the TLB because we cannot
take a TLB miss during the assembler floppy interrupt handler that
does the data transfer.

That is no longer necessary since we've removed sun4c support, thus
this stuff can disappear completely.

Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-13 13:23:16 -07:00
Grant Likely
cd4cd7306a sparc: remove references to of_device and to_of_device
of_device is just a #define alias to platform_device.  This patch
replaces all references to it with platform_device.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: David S. Miller <davem@davemloft.net>
2010-07-24 09:58:22 -06:00
Robert Reif
aa83a26a19 sparc: use sparc64 version of scatterlist.h
Use sparc64 version of scatterlist.h.

There are three main differences:
    dma_addr_t replaces __u32
    dma_address replaces dvma_address
    dma_length replaces dvma_length

dma_addr_t is a u32 on sparc32.

Boot tested on sparc32.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-11 20:24:58 -08:00
David S. Miller
9dc69230a9 sparc: Kill now spurious includes of sbus.h
In order to make this week I also had to add an include
of linux/dma-mapping.h to asm/pci_32.h because drivers/pci/pci.c
really depends upon getting this header somehow.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:15:23 -07:00
David S. Miller
0ad626a2a4 sparc32: Kill iounit_map_dma_*().
Unused.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:15:23 -07:00
David S. Miller
046e26a8ba sparc: Remove generic SBUS probing layer.
The individual SBUS IOMMU arch code now sets the IOMMU information
directly into the OF device objects.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:15:21 -07:00
David S. Miller
4b1c5df2af sparc32: Make mmu_map_dma_area and mmu_unmap_dma_area take a device pointer.
This lets us kill this "map it in every IOMMU" crazy code, and also
some of the final references to sbus_root.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:15:07 -07:00
David S. Miller
b1387c35be sparc32: Kill mmu_translate_dvma and implementations.
No longer used.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:15:03 -07:00
David S. Miller
260489fa8a sparc32: Make mmu_{get,release}_*() take a struct device pointer.
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:13:13 -07:00
David S. Miller
e003934876 sparc32: Make IOMMU and IO-UNIT init work with device nodes.
And stick the iommu archdata pointer into the generic OF device tree
of_device struct as well.

We still have to pass the sbus_bus object down into the routines so
that the SBUS bus objects get the iommu cookies set properly.  After
drivers get converted to being pure OF drivers, that can go away.

Signed-off-by: David S. Miller <davem@davemloft.net>
2008-08-29 02:13:11 -07:00
Adrian Bunk
88278ca27a sparc: remove CVS keywords
This patch removes the CVS keywords that weren't updated for a long time
from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-05-20 00:33:44 -07:00
David S. Miller
6ee4e28be8 [SPARC32]: Fix build-warning in io-unit.c
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-27 00:54:14 -07:00
Jens Axboe
58b053e4ce Update arch/ to use sg helpers
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22 21:19:59 +02:00
Jens Axboe
0912a5db0e SPARC: sg chaining support
This updates the sparc iommu/pci dma mappers to sg chaining.

Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-16 11:27:32 +02:00
Robert Reif
3ac4c949e0 [SPARC32]: Remove iommu from struct sbus_bus and use archdata like sparc64.
Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-10 15:52:06 -07:00
David S. Miller
d4accd60d2 [SPARC]: Check kzalloc() return value in SUN4D irq/iommu init.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:40:10 -08:00
Yan Burman
c80892d150 [SPARC]: Replace kmalloc+memset with kzalloc
Replace kmalloc+memset with kzalloc

Signed-off-by: Yan Burman <burman.yan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-12-10 02:40:00 -08:00
Raymond Burns
2f72ba4358 [SPARC]: Initialize iounit spinlock in iounit_init().
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-21 14:18:13 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds
1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00