The increment operator of pointer in be32_to_cpu() is not explicitly.
It made the warning from clang:
drivers/power/supply/power_supply_core.c:674:36: error: multiple
unsequenced modifications to 'list' [-Werror,-Wunsequenced]
drivers/power/supply/power_supply_core.c:675:41: error: multiple
unsequenced modifications to 'list' [-Werror,-Wunsequenced]
Link: https://github.com/ClangBuiltLinux/linux/issues/460
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The existing POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT and
POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX properties
don't have documentation. I add that documentation here.
v5 changes:
- Split this commit out from the previous two commits.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD
and POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD properties, to expand
the existing CHARGE_CONTROL_* properties. I am adding them in order
to support a new Chrome OS device, but these properties should be
general enough that they can be used on other devices.
When the charge_type is "Custom", the charge controller uses the
POWER_SUPPLY_PROP_CHARGE_CONTROL_* properties as configuration for some
other algorithm. For example, in the use case that I am supporting,
this means the battery begins charging when the percentage
level drops below POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD and
charging ceases when the percentage level goes above
POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD.
v5 changes:
- Add the other missing CHARGE_CONTROL_* properties documentation in
a separate commit
- Split up adding the charge types and adding the
POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD and
POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD properties into
two different commits.
v4 changes:
- Add documentation for the new properties, and add documentation for
the the previously missing charge_control_limit and
charge_control_limit_max properties.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add "Standard", "Adaptive", and "Custom" modes to the charge_type
property, to expand the existing "Trickle" and "Fast" modes.
I am adding them in order to support a new Chrome OS device,
but these properties should be general enough that they can be
used on other devices.
The meaning of "Standard" is obvious, but "Adaptive" and "Custom" are
more tricky: "Adaptive" means that the charge controller uses some
custom algorithm to change the charge type automatically, with no
configuration needed. "Custom" means that the charge controller uses the
POWER_SUPPLY_PROP_CHARGE_CONTROL_* properties as configuration for some
other algorithm.
v5 changes:
- Split up adding the charge types and adding the
POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD and
POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD properties into
two different commits.
v4 changes:
- Add documentation for the new properties, and add documentation for
the the previously missing charge_control_limit and
charge_control_limit_max properties.
Signed-off-by: Nick Crews <ncrews@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The ACEPC T8 and T11 Cherry Trail Z8350 mini PCs use an AXP288 and as PCs,
rather then portables, they does not have a battery. Still for some
reason the AXP288 not only thinks there is a battery, it actually
thinks it is discharging while the PC is running, slowly going to
0% full, causing userspace to shutdown the system due to the battery
being critically low after a while.
This commit adds the ACEPC T8 and T11 to the axp288 fuel-gauge driver
blacklist, so that we stop reporting bogus battery readings on this device.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1690852
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
User-space might be interested in receiving uevents when the charging
starts/stops or if conditions of battery changes (e.g.
over-temperature). Notify about changes in battery also when the flags
change, not only SoC.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This immutable branch contains the changes required for OLPC
1.75 battery, which touches x86 and power-supply and is based
on v5.1-rc1.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-----BEGIN PGP SIGNATURE-----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=wNRw
-----END PGP SIGNATURE-----
Merge tag 'psy-olpc-1.75-battery-signed' into psy-next
This immutable branch contains the changes required for OLPC
1.75 battery, which touches x86 and power-supply and is based
on v5.1-rc1.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The power framework gained ability to register groups of sysfs
attributes in commit cef8fe6a38 ("power: supply: core: add support for
custom sysfs attributes").
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Suggested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The battery and the protocol are essentially the same as OLPC XO 1.5,
but the responses from the EC are LSB first.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This wouldn't work on the DT-based ARM platform. Let's read the EC version
directly from the EC driver instead.
This removes x86 specific bits that would prevent this driver from being
used with the EC of ARM-based OLPC XO 1.75.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The global variables for private data are not too nice. I'd like some
more, and that would clutter the global name space even further.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Avoid using the x86 OLPC platform specific call to get the board
version. That wouldn't work on FDT-based ARM MMP2 platform.
Add the XO 1.5 compatible string too. This is actually not completely
necessary as the battery nodes on XO 1.5 claim to be compatible with
"olpc,xo1-battery", but there are, in fact, differencies.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The XO-1 and XO-1.5 batteries apparently differ in an ability to report
ambient temperature. We need to use a different compatible string for the
XO-1.5 battery.
Previously olpc_dt_fixup() used the presence of the battery node's
compatible property to decide whether the DT is up to date. Now we need
to look for a particular value in the compatible string, to decide
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This makes the following patch more concise.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
It was pointed out in a review, and checkpatch.pl complains about this.
Breaking it down into multiple ofw evaluations works just as well and
reads better.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The XO-1 and XO-1.5 batteries apparently differ in an ability to report
ambient temperature.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add a driver for battery present on Ingenic JZ47xx SoCs.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add documentation for the ingenic-battery driver, used on JZ47xx SoCs.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Merge immutable branch containing the IIO changes required
for the new Ingenic JZ47xx battery fuel gauge driver.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
This adds support for AXP813 PMIC. It is almost the same as AXP22X but
has a different current limit.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
To prepare for a new PMIC, factor out the code responsible of returning
the maximum current to axp20x_get_current_max.
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
On AXP221 and later AXP PMICs that have the N_VBUSEN pin, when this pin
is high, either due to the PMIC driving it high or as an input, the VBUS
detection related interrupt mechanisms are disabled.
Previously this was worked around in the phy-sun4i-usb driver, which
needed to sense VBUS changes and report them to the musb driver in a
timely matter. However this workaround was only for the A31 and A33 type
USB PHYs. To support newer platforms we would have to enable it for
almost all the post-A31 SoCs.
However, since this is actually the result of the PMIC's behavior, the
workaround would be better if done in the PMIC driver, in this case the
VBUS power supply driver.
Add the same workqueue-based polling to the VBUS power supply driver.
The polling interval is chosen to be the debounce interval from the USB
PHY driver, as this short interval is needed in some cases, but the
power supply driver would not know when.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The VBUS current limit value macros have VBUS typed as VBUC, while
the bitmask macro is named correctly. Fix it.
Fixes: 69fb4dcada ("power: Add an axp20x-usb-power driver")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
This adds the "x-powers,axp813-usb-power-supply" to the list of
compatibles for AXP20X VBUS power supply driver.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./drivers/power/supply/power_supply_core.c:601:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 595, but without a corresponding object release within this function.
./drivers/power/supply/power_supply_core.c:604:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 595, but without a corresponding object release within this function.
./drivers/power/supply/power_supply_core.c:632:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 595, but without a corresponding object release within this function.
./drivers/power/supply/power_supply_core.c:635:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 595, but without a corresponding object release within this function.
./drivers/power/supply/power_supply_core.c:653:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 595, but without a corresponding object release within this function.
./drivers/power/supply/power_supply_core.c:664:3-9: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 595, but without a corresponding object release within this function.
./drivers/power/supply/power_supply_core.c:673:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 595, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
492 int ab8500_bm_of_probe(struct device *dev,
493 struct device_node *np,
494 struct abx500_bm_data *bm)
495 {
496 const struct batres_vs_temp *tmp_batres_tbl;
497 struct device_node *battery_node;
...
501 /* get phandle to 'battery-info' node */
502 battery_node = of_parse_phandle(np, "battery", 0);
...
509 if (!btech) {
510 dev_warn(dev, "missing property battery-name/type\n");
511 return -EINVAL; ---> leaked here
512 }
...
540 of_node_put(battery_node); ---> released here
541
542 return 0;
543 }
Detected by coccinelle with the following warnings:
./drivers/power/supply/ab8500_bmdata.c:511:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 502, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
With loadable modules we may get the following during init:
could not initialize VBUS or ID IIO: -517
Let's not print any pointless error messages for deferred probe.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
With loadable modules we may get the following during init:
could not initialize VBUS or ID IIO: -517
Let's not print any pointless error messages for deferred probe.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
We should not use measured current value for average since we have proper
coulomb counter values available. Using measured current value should
be only used when the value is queried at a higher rate than the 250 ms
rate the coulomb counter is configured to run at.
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The coulomb counter calibration is not CCO, it's CCM. And the CCM is
nine bits wide signed register, so let's use sign_extend32() for it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The accumulator sample register is signed 32-bits wide register on
droid 4. And only the earlier version of cpcap has a signed 24-bits
wide register. We're currently passing it around as unsigned, so
let's fix that and use sign_extend32() for the earlier revision.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
We need to check current instead of the charge counter to see if
a charger is connected. The charge counter shows the cumulated value
instead of the current charge current and can be negative or positive.
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Introduce optional support of POWER_SUPPLY_PROP_STATUS for chargers
which provide charging status GPIO.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add documentation for the "charge-status-gpios" property.
Update the "gpios" property with a valid example.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There is a spelling mistake in ps_get_cur_charge_cntl_limit function so
replace 'chrage' for 'charge'.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Convert "iio_read_avail_channel_raw" over to a wrapper around
"iio_read_avail_channel_attribute".
With the introduction of "iio_read_avail_channel_attribute",
the necessity of having a separate call to read raw channel values
became redundant.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Extend the inkern API with a function for reading available
attribute values of iio channels.
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If called fast enough so samples do not increment, we can get
division by zero in kernel:
__div0
cpcap_battery_cc_raw_div
cpcap_battery_get_property
power_supply_get_property.part.1
power_supply_get_property
power_supply_show_property
power_supply_uevent
Fixes: 874b2adbed ("power: supply: cpcap-battery: Add a battery driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
rename only - no functional changes
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
There never was a device called LTC3651, it always was just LT3651.
This circumstance makes it pretty difficult to identify what this
driver is meant to control.channges since
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Explicitly cancel/sync the irq_work delayed work, otherwise
there's a chance that it will run after the device is removed,
which would result in a use-after-free.
Note that cancel/sync should happen:
- after irq's have been disabled, as the isr re-schedules the work
- before the power supply is unregistered, because the work func
uses the power supply handle.
Cc: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Call order on probe():
- max14656_hw_init() enables interrupts on the chip
- devm_request_irq() starts processing interrupts, isr
could be called immediately
- isr: schedules delayed work (irq_work)
- irq_work: calls power_supply_changed()
- devm_power_supply_register() registers the power supply
Depending on timing, it's possible that power_supply_changed()
is called on an unregistered power supply structure.
Fix by registering the power supply before requesting the irq.
Cc: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Add support for SAM9X60 shutdown controller.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Fix the example documentation which is missing a semi-colon.
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently there is no check on platform_get_irq() return value
in case it fails, hence never actually reporting any errors and
causing unexpected behavior when using such value as argument
for function regmap_irq_get_virq().
Fix this by adding a proper check, a message reporting any errors
and returning *pirq*
Addresses-Coverity-ID: 1443940 ("Improper use of negative value")
Fixes: 843735b788 ("power: axp288_charger: axp288 charger driver")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Commit c08b1f45d7 ("power: supply: core: Add power_supply_battery_info
and API") introduced code to parse the simple-battery node and express
battery charging constraints. However, it parsed that node using the
properties constant_charge_current_max_microamp and
constant_charge_voltage_max_microvolt, while the device tree binding for
the simple-battery node uses dashes to separate the words in those
properties (constant-charge-current-max-microamp and
constant-charge-voltage-max-microvolt).
Let's make the code match the binding.
Fixes: c08b1f45d7 ("power: supply: core: Add power_supply_battery_info and API")
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
