Using struct|enum :c:`type` here sounds a bad idea, as it may be
documenting data types that were already removed. Also, it makes
the file harder to read.
As automarkup.py should be able to handle those cases, let's
just get rid of the markup.
While not required by automarkup, in order to make easier for
grep, both type and names are now at the same line.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several places there where struct was used twice,
on multiple lines, like:
struct
struct ``v4l2_zoomcap``
That's probably done during the DocBook to ReSt conversion.
Probably the cases where "struct struct" were at the same line
was addressed back then, but the multi-line cases are still
there.
Get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As reported by Sphinx:
./Documentation/driver-api/media/v4l2-subdev:490: ./include/media/v4l2-subdev.h:384: WARNING: Unparseable C cross-reference: 'struct'
Invalid C declaration: Expected identifier in nested name, got keyword: struct [error at 6]
struct
------^
The markup there is wrong:
&struct &v4l2_input -> &struct v4l2_input
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The new C domain code on Sphinx 3 is a lot more pedantic.
It only accepts real functions declared as c:function.
So, declarations like this are not valid:
.. c:function::
int (*adap_enable)(struct cec_adapter *adap, bool enable);
Also, no blank lines are allowed after ".. c:function:", and
continuation lines should be like:
.. c:function:
int (void foo, \
int bar);
Change the logic there, in order to avoid lots of warnings
when built with Sphinx 3.x.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are two kernel-doc markups for include/media/v4l2-async.h,
one at v4l2-async.rst and another one at v4l2-subdev.rst.
Sphinx 3.x checks it and complains for duplicated symbols.
So, get rid of one of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The same markup are there twice, causing warnings with
Sphinx 3.x. Drop the second copy.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several :c:type: definitions there, in order to
do cross-references with the driver's documentation.
Those are broken when docs are built with Sphinx 3.x, as
it would require :c:struct: instead.
For Sphinx < 3.x, the automarkup.py extension is able to do the
replacement already, and a future improvement on it should make
it also work with Sphinx 3.x.
So, get rid of the usage of the :c:type: macro there.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Sphinx 3.x is pedantic with glossary entries:
Documentation/userspace-api/media/glossary.rst:17: WARNING: term device driver not found in case sensitive match.made a reference to Device Driver instead.
Documentation/userspace-api/media/glossary.rst:59: WARNING: term media hardware not found in case sensitive match.made a reference to Media Hardware instead.
Documentation/userspace-api/media/glossary.rst:59: WARNING: term IP block not found in case sensitive match.made a reference to IP Block instead.
Documentation/userspace-api/media/glossary.rst:64: WARNING: term hardware component not found in case sensitive match.made a reference to Hardware Component instead.
Documentation/userspace-api/media/glossary.rst:64: WARNING: term ip block not found in case sensitive match.made a reference to IP Block instead.
Documentation/userspace-api/media/glossary.rst:70: WARNING: term peripheral not found in case sensitive match.made a reference to Peripheral instead.
Documentation/userspace-api/media/glossary.rst:130: WARNING: term V4L2 hardware not found in case sensitive match.made a reference to V4L2 Hardware instead.
Documentation/userspace-api/media/glossary.rst:151: WARNING: term hardware peripheral not found in case sensitive match.made a reference to Hardware Peripheral instead.
Documentation/userspace-api/media/glossary.rst:183: WARNING: term device node not found in case sensitive match.made a reference to Device Node instead.
Documentation/userspace-api/media/glossary.rst:191: WARNING: term bridge driver not found in case sensitive match.made a reference to Bridge Driver instead.
While it works with case-insensitive entires, it complains.
Let's fix it, in order to cleanup the warnings. Also, I won't
doubt that a later change on Sphinx will end breaking support
for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Documentation/driver-api/media/camera-sensor.rst:123: WARNING: Inline literal start-string without end-string.
There's a missing blank space over there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Maxime is no more a BayLibre employee, and his e-mail address is now
invalid.
I'll be happy to add him back using another e-mail address if he wants
to continue maintaining this driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The function 'rkisp1_stream_start' calls 'rkisp1_set_next_buf'
which access the buffers, so the call should be protected by
taking the cap->buf.lock.
After this patch, all locks are reviewed and commented so remove
the TODO item "review and comment every lock"
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
When locking, use either 'spin_lock' or 'spin_lock_irq'
according to the context. There is nowhere need to
use 'spin_lock_irqsave'.
Outside of irq context, always use 'spin_lock_irq'
to be on the safe side.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the function 'rkisp1_params_config_parameter' the lock
is taken while applying the default config. But the lock
only needs to protect the buffers list and the 'is_streaming'
field, so move the locking to lock only what is needed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The field stats->is_streaming is written in 'start_streaming' callback
without the stats->lock protection.
The isr might run together with the callback so 'spin_lock_irq'
should be used.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The signal RKISP1_CIF_ISP_FRAME_IN is not used in the isr so
there is no need to enable it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The signal RKISP1_CIF_ISP_FRAME is set when the ISP completes
outputting the frame to the next block in the pipeline.
In order to keep buffer synchronization we assume that the
RKISP1_CIF_ISP_V_START signal never arrives together with the
RKISP1_CIF_ISP_FRAME signal.
In case those signals arrive together then the code is not able to
tell if the RKISP1_CIF_ISP_FRAME signal relates to the frame of
the current v-start or the previous. This patch adds a WARN_ONCE
and a debugfs var to catch it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The isp.frame_sequence is now read only from the irq handlers
that are all fired from the same interrupt, so there is not need
for atomic operation.
In addition, the frame seq incrementation is moved from
rkisp1_isp_queue_event_sof to rkisp1_isp_isr to make the code
clearer and the incorrect inline comment is removed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The params isr is called when the ISP finishes processing a frame
(RKISP1_CIF_ISP_FRAME). Configurations performed in the params isr
will be applied on the next frame. Since frame_sequence is updated
on the vertical sync signal, we should use frame_sequence + 1 as
the vb.sequence of the params buffer to indicate to userspace on
which frame these parameters are being applied.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently, the first buffer queued in the params node is returned
immediately to userspace and a copy of it is saved in the field
'cur_params'. The copy is later used for the first configuration
when the stream is initiated by one of selfpath/mainpath capture nodes.
There are 3 problems with this implementation:
- The first params buffer is applied and returned to userspace even if
userspace never calls to streamon on the params node.
- If the first params buffer is queued after the stream started on the
params node then it will return to userspace but will never be used.
- The frame_sequence of the first buffer is set to -1 if the main/selfpath
did not start streaming.
A correct implementation is to apply the first params buffer when stream
is started from mainpath/selfpath and only if params is also streaming.
The patch adds a new function 'rkisp1_params_apply_params_cfg' which takes
a buffer from the buffers queue, apply it and returns it to userspace.
The function is called from the irq handler and when main/selfpath stream
starts - in the function 'rkisp1_params_config_parameter'
Also remove the fields 'cur_params', 'is_first_params' which are no
more needed.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The cproc (color processing) configuration needs to know if
an image effect is configured. The code uses the image effect
in 'cur_params' which is the first params buffer queued in the stream.
This is the wrong place to read the value. The value should be
taken from the current params buffer.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the code in the isr checks if the buffer list is not
empty before referencing a buffer and then check again if the
buffer is not NULL. Instead we can save one 'if' statement by
returning if the buffers list is empty.
Also remove non-helpful inline doc 'get one empty buffer'
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The code in '.stop_streaming' callback releases and acquire the lock
at each iteration when returning the buffers.
Holding the lock disables interrupts so it should be minimized.
To make the code cleaner and still minimize holding the lock,
the buffer list is first moved to a local list and
then can be iterated without the lock.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Documentation on how to call the subdev ops is currently in the middle of
synchronous and asynchronous registration. Move it to a dedicated
subsection after the registration methods.
Also move the final paragraph "The advantage of using v4l2_subdev..." to
the beginning of the new section as it has an introductory content.
[hverkuil: correct accidental deletion of the last part of a sentence]
Suggested-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The subdev registration topic is pretty lengthy, and takes more than
half of the "V4L2 sub-devices" section. Help readers in finding their
way through the document by dedicating a subsection to
"Subdev registration".
Each of the two registration methods takes many paragraphs, but since
adding a subsubsection would be overkill, just emphasize them in bold.
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
sg_init_table zeroes its first argument, so the allocation of that argument
doesn't have to.
the semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x,n,flags;
@@
x =
- kcalloc
+ kmalloc_array
(n,sizeof(struct scatterlist),flags)
...
sg_init_table(x,n)
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Extend the list of supported formats to include all RGB layouts of RAW8.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Extend the list of supported formats to include all RGB layouts of RAW8.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add linux,autosuspend-period property for gpio ir receiver. Some cpuidle
systems wake from idle may take a bit long time, for such case, need
disable cpuidle temporarily.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
GPIO IR receive is much rely on interrupt response, uneven interrupt
latency will lead to incorrect timing, so the decoder fails to decode
it. The issue is particularly acute on some systems which support
cpuidle, not all, dynamically disable and enable cpuidle can solve this
problem to a great extent.
However, there is a downside to this approach, the measurement of header
on the first frame may incorrect. Test on i.MX8M serials, when enable
cpuidle, interrupt latency could be about 500us.
With this patch:
1. has no side effect on non-cpuidle system, even runtime pm api won't
be invoked to avoid a bunch of pm busy work for devices that do not need
it, including spinlocks, ktime, etc.
2. latency is still much longer for the first gpio interrupt on cpuidle
system, so the first frame may not be decoded. Generally, RC would transmit
multiple frames at once press, we can sacrifice the first frame.
3. add "linux,autosuspend-period" property in device tree if you also
suffer this cpuidle issue.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Constify a number of static structs that were not modified. In order to
be able to do that, const input arguments to a couple of functions that
not modify their argument. This allows the compiler to put them in
read-only memory, resulting in about 6k memory being read-only, and the
resulting module is 400 bytes smaller.
Before:
text data bss dec hex filename
15492 6873 0 22365 575d drivers/media/dvb-frontends/tda18271c2dd.ko
After:
text data bss dec hex filename
21021 897 0 21918 559e drivers/media/dvb-frontends/tda18271c2dd.ko
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
usb_free_coherent() is safe with NULL addr and this check is
not required.
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Make sure the endpoint is ISOC in and do not hard code USB_DIR_IN.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The .suspend() and .resume() callbacks are not defined for this driver.
Thus, just the unlisting of PM pointers in the struct initializer will make
no change in its behavior. Still unlisting is necessary so as to get rid of
.suspend and .resume pointers as they are part of the legacy framework and
should not be used in the driver code explicitly.
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If you do sanity checks, you should do them for both endpoints.
Hence introduce checking for endpoint type for the output
endpoint, too.
Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If rtl2832_sdr_probe() encounters an unsupported tuner it cleans up
everything and returns 0. This can result in various bad things later.
The patch sets the error code on the corresponding path.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As per spec, the CAPTURE resolution should be automatically set based on
the OUTPUT resolution. This patch properly propagate width/height to the
capture when the OUTPUT format is set and override the user provided
width/height with configured OUTPUT resolution when the CAPTURE fmt is
updated.
This also prevents userspace from selecting a CAPTURE resolution that is
too small, avoiding kernel oops.
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Tested-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the files:
Documentation/admin-guide/media/rkisp1.rst
Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst
to the Rockchip ISP driver entry in the MAINTAINERS file.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The metadata formats V4L2_META_FMT_RK_ISP1_PARAMS,
V4L2_META_FMT_RK_ISP1_STAT_3A are currently described in
two files under
drivers/staging/media/rkisp1/Documentation/media/uapi/v4l
This patch moves the description to one file:
Documentation/userspace-api/media/v4l/pixfmt-meta-rkisp1.rst
The patch also extends the description and adds the rst file to
toctree.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch changes the device configuration to support capture
of V4L2_PIX_FMT_GREY video. The 'write_format' field of the format
description should be planar.
Also the array 'pixm->plane_fmt' that describes the planes should
be memset to 0 before filling it since the the cb, cr planes should
be 0.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The capture has a mapping of the mbus code needed for each pixelformat.
This can be used to simplify the link validation by comparing the mbus
code in the capture with the code in the resizer.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add support to more YUV encoded media bus formats on the resizer's
source pad. The patch defines an array rkisp1_rsz_yuv_formats[]
with the list of supported YUV media bus formats and their {hv}div
values. The {hv}div are used in the function 'rkisp1_rsz_config'
instead of the macros RKISP1_MBUS_FMT_(HV)DIV, and instead of
checking the capture format.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the resizer outputs the same media bus format
as the input. This is wrong since the resizer is also used
to downscale YUV formats. This patch changes the enumeration
of the supported formats. The supported formats on the sink pad
should be taken from the isp entity and the supported formats on
the source pad should be taken from the capture entity.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add a function 'rkisp1_cap_enum_mbus_codes' that receive
a pointer to 'v4l2_subdev_mbus_code_enum' and returns the
next supported mbus format of the capture. The function
assumes that pixel formats with identical 'mbus' are grouped
together in the hardcoded arrays, therefore the order of the
entries in the array 'rkisp1_sp_fmts' are adjusted.
This function is a helper for the media bus enumeration of
the source pad of the resizer entity.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The capture devices supports YUV, RGB, and Bayer formats.
Adding V4L2_CAP_IO_MC capability will reflect userspace
what format should be set on the resizer in order to stream
each of the video formats.
The patch adds a 'mbus' field to the struct
'rkisp1_capture_fmt_cfg' which maps the video format
to the needed mbus format.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The selfpath capture does not support bayer formats.
Therefore there is no reason to support bayer formats
on the selfpath resizer. The selfpath resizer should
support only MEDIA_BUS_FMT_YUYV8_2X8.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
It is not clear if the device is able to support format
V4L2_PIX_FMT_YUV444M so remove it.
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
