In the future we will have MMU v2 code, so we need to prepare the
driver for it. The first step is to rename the current MMU file to
mmu_v1.c.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Change the acquiring of a device virtual address for mapping by using the
smallest possible alignment, rather than the biggest, depending on the
page size used by the user for allocating the memory. This will lower the
virtual space memory consumption.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For consistency with GAUDI code, add check of the relevant flag in the
device structure before resetting the GOYA device in case of firmware
event.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
For future ASICs, we increase this field by one nibble. This field was not
used by the current ASICs so this change doesn't break anything.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Because the device CPU compiler aligns structures to 8 bytes,
struct cpucp_info has an alignment issue as some parts
in the structure are not aligned to 8 bytes.
It is preferred that we explicitly insert placeholders inside
the structure to avoid confusion
in order to validate this scenario, we printed both pointers:
__u8 cpucp_version[VERSION_MAX_LEN]; (0xffff899c67ed4cbc)
__le64 dram_size; (0xffff899c67ed4d40)
we see difference of 132 bytes although the first array
is only 128 bytes long, Meaning compiler added a 4 byte padding.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There were a couple of comments where the name ArmCP was still used. Rename
it to CPU-CP.
In addition, rename ArmCP or ARM in log messages to "device CPU".
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
There is a case where the user reaches the maximum number of CS in-flight.
In that case, the driver rejects the new CS of the user with EAGAIN. Count
that event so the user can query the driver later to see if it happened.
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add dma_mmap_coherent() for goya and gaudi to match their use of
dma_alloc_coherent(), see the Link tag for why.
Link: https://lore.kernel.org/lkml/20200609091727.GA23814@lst.de/
Cc: Christoph Hellwig <hch@lst.de>
Cc: Zhang Li <li.zhang@bitmain.com>
Cc: Ding Z Nan <oshack@hotmail.com>
Signed-off-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The driver use vm_pgoff to hold the CB idr handle. Before we actually call
the mapping function, we need to clear the handle so there won't be any
garbage left in vm_pgoff.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Arrange the hl_mmap code to be more structured and expandable for the
future. Add better defines that describe our usage of the vm_pgoff.
Note that I shamelessly took the code and defines from the amdkfd driver
(my previous driver).
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
When shifting a boolean variable by more than 31 bits and putting the
result into a u64 variable, we need to cast the boolean into unsigned 64
bits to prevent possible overflow.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
ArmCP mandates that the device CPU is always an ARM processor, which might
be wrong in the future.
Most of this change is an internal renaming of variables, functions and
defines but there are two entries in sysfs which have armcp in their
names. Add identical cpucp entries but don't remove yet the armcp entries.
Those will be deprecated next year. Add the documentation about it in sysfs
documentation.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Add driver implementation for reading the total energy consumption
from the device ARM FW.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Include linux/bitfield.h only in habanalabs.h, instead of in each and
every file that needs it, as habanalabs.h is already included by all.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
change busy engines bitmask to 64 bits in order to represent
more engines, needed for future ASIC support.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Eliminate following warning:
warning: Shifting signed 32-bit value by 31 bits is undefined behavior
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The driver waits for the TPC vector pipe to be empty before checking if the
TPC kernel has finished executing, but the code doesn't validate that the
pipe was indeed empty, it just wait for it without checking the return
value.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
new_dma_pkt->ctl is assigned a value and then is reassigned a new value
without the first value ever being used.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Use the standard FIELD_PREP() macro instead of << operator to perform
bitmask operations. This ensures type check safety and eliminate compiler
warnings.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Use the standard macros to define bitmasks.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If both parts of if-else are goto statements, we can remove the else and
put the else goto statement after the if statement.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
%u is used for unsigned so we need to cast the int variable to u32 to avoid
compiler warning.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Although the possible values for CB's ID are only 32 bits, there are a few
places in the code where this field is shifted and passed into a function
which expects 64 bits.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
If there is a failure during the testing of a queue,
to ease up debugging - print the queue id.
Signed-off-by: Dotan Barak <dbarak@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Allow user application to write to this register in order
to be able to configure the quiet period of the QMAN between grants.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
driver will now get notified upon any PCI error occurred and
will respond according to the severity of the error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Although the driver defines the first user-available sync manager object
and monitor in habanalabs.h, we would like to also expose this information
via the INFO IOCTL so the runtime can get this information dynamically.
This is because in future ASICs we won't need to define it statically.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Update firmware header with new API for getting pcie info
such as tx/rx throughput and replay counter.
These counters are needed by customers for monitor and maintenance
of multiple devices.
Add new opcodes to the INFO ioctl to retrieve these counters.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
habanalabs driver uses dma-fence mechanism for synchronization.
dma-fence mechanism was designed solely for GPUs, hence we purpose
a simpler mechanism based on completions to replace current
dma-fence objects.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Future ASIC names are longer than 15 chars so increase the variable length
to 32 chars.
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: Tomer Tayar <ttayar@habana.ai>
uio_register_device() do two things.
1) get an uio id from a global pool, e.g. the id is <A>
2) create file nodes like /sys/class/uio/uio<A>
uio_unregister_device() do two things.
1) free the uio id <A> and return it to the global pool
2) free the file node /sys/class/uio/uio<A>
There is a situation is that one worker is calling uio_unregister_device(),
and another worker is calling uio_register_device().
If the two workers are X and Y, they go as below sequence,
1) X free the uio id <AAA>
2) Y get an uio id <AAA>
3) Y create file node /sys/class/uio/uio<AAA>
4) X free the file note /sys/class/uio/uio<AAA>
Then it will failed at the 3rd step and cause the phenomenon we saw as it
is creating a duplicated file node.
Failure reports as follows:
sysfs: cannot create duplicate filename '/class/uio/uio10'
Call Trace:
sysfs_do_create_link_sd.isra.2+0x9e/0xb0
sysfs_create_link+0x25/0x40
device_add+0x2c4/0x640
__uio_register_device+0x1c5/0x576 [uio]
adf_uio_init_bundle_dev+0x231/0x280 [intel_qat]
adf_uio_register+0x1c0/0x340 [intel_qat]
adf_dev_start+0x202/0x370 [intel_qat]
adf_dev_start_async+0x40/0xa0 [intel_qat]
process_one_work+0x14d/0x410
worker_thread+0x4b/0x460
kthread+0x105/0x140
? process_one_work+0x410/0x410
? kthread_bind+0x40/0x40
ret_from_fork+0x1f/0x40
Code: 85 c0 48 89 c3 74 12 b9 00 10 00 00 48 89 c2 31 f6 4c 89 ef
e8 ec c4 ff ff 4c 89 e2 48 89 de 48 c7 c7 e8 b4 ee b4 e8 6a d4 d7
ff <0f> 0b 48 89 df e8 20 fa f3 ff 5b 41 5c 41 5d 5d c3 66 0f 1f 84
---[ end trace a7531c1ed5269e84 ]---
c6xxvf b002:00:00.0: Failed to register UIO devices
c6xxvf b002:00:00.0: Failed to register UIO devices
Signed-off-by: Lang Dai <lang.dai@intel.com>
Link: https://lore.kernel.org/r/1600054002-17722-1-git-send-email-lang.dai@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
of_parse_phandle() returns device_node with incremented ref count
which needs to be decremented by of_node_put() when device_node
is not used.
Fixes: e2a5402ec7 ("nvmem: Add nvmem_device based consumer apis.")
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917134437.16637-5-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We don't need to specify any ranges when allocating IDs so we can switch
to ida_alloc() and ida_free() instead of the ida_simple_ counterparts.
ida_simple_get(ida, 0, 0, gfp) is equivalent to
ida_alloc_range(ida, 0, UINT_MAX, gfp) which is equivalent to
ida_alloc(ida, gfp). Note: IDR will never actually allocate an ID
larger than INT_MAX.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20200917134437.16637-4-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set type as NVMEM_TYPE_EEPROM to expose this info via
sysfs:
$ cat /sys/bus/nvmem/devices/{DEVICE}/type
EEPROM
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200916170933.20302-4-vadym.kochan@plvision.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Set type as NVMEM_TYPE_EEPROM to expose this info via
sysfs:
$ cat /sys/bus/nvmem/devices/{DEVICE}/type
EEPROM
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Link: https://lore.kernel.org/r/20200916170933.20302-3-vadym.kochan@plvision.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The initialisation code checks TRCIDR4 to determine the number of resource
selectors available on the system. Since ETM v 4.3, the value 0 has a
different meaning. This patch takes into account this change.
Signed-off-by: Mike Leach <mike.leach@linaro.org>
[Removed '.' in patch title, added stable]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-17-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member @nr_resource represents how many resource selector pairs,
and the pair 0 is always implemented and reserved.
So let's multiply by 2 when resetting the selector configuration.
And also update the validation of the input @idx.
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
[Fixed typographical error in changelog, added stable]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-16-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Coresight driver assumes sink is common across all the ETMs,
and tries to build a path between ETM and the first enabled
sink found using bus based search. This breaks sysFS usage
on implementations that has multiple per core sinks in
enabled state.
To fix this, coresight_get_enabled_sink API is updated to
do a connection based search starting from the given source,
instead of bus based search.
With sink selection using sysfs depecrated for perf interface,
provision for reset is removed as well in this API.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
[Fixed indentation problem and removed obsolete comment]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-15-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When using the perf interface, sink selection using sysfs is
deprecated.
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-14-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add CoreSight mailing list so that people can participate in patch
reviews and know what features are coming next.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-13-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The TRCSEQEVR(3) is reserved, using '@nrseqstate - 1' instead to avoid
accessing the reserved register.
Fixes: f188b5e76a ("coresight: etm4x: Save/restore state across CPU low power states")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
[Fixed capital letter in title]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-12-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the specified/hinted sink is not reachable from a subset of the CPUs,
we could end up unable to trace the event on those CPUs. This
is the best effort we could do until we support 1:1 configurations.
Fail gracefully in such cases avoiding a WARN_ON, which can be easily
triggered by the user on certain platforms (Arm N1SDP), with the following
trace paths :
CPU0
\
-- Funnel0 --> ETF0 -->
/ \
CPU1 \
MainFunnel
CPU2 /
\ /
-- Funnel1 --> ETF1 -->
/
CPU1
$ perf record --per-thread -e cs_etm/@ETF0/u -- <app>
could trigger the following WARNING, when the event is scheduled
on CPU2.
[10919.513250] ------------[ cut here ]------------
[10919.517861] WARNING: CPU: 2 PID: 24021 at
drivers/hwtracing/coresight/coresight-etm-perf.c:316 etm_event_start+0xf8/0x100
...
[10919.564403] CPU: 2 PID: 24021 Comm: perf Not tainted 5.8.0+ #24
[10919.570308] pstate: 80400089 (Nzcv daIf +PAN -UAO BTYPE=--)
[10919.575865] pc : etm_event_start+0xf8/0x100
[10919.580034] lr : etm_event_start+0x80/0x100
[10919.584202] sp : fffffe001932f940
[10919.587502] x29: fffffe001932f940 x28: fffffc834995f800
[10919.592799] x27: 0000000000000000 x26: fffffe0011f3ced0
[10919.598095] x25: fffffc837fce244c x24: fffffc837fce2448
[10919.603391] x23: 0000000000000002 x22: fffffc8353529c00
[10919.608688] x21: fffffc835bb31000 x20: 0000000000000000
[10919.613984] x19: fffffc837fcdcc70 x18: 0000000000000000
[10919.619281] x17: 0000000000000000 x16: 0000000000000000
[10919.624577] x15: 0000000000000000 x14: 00000000000009f8
[10919.629874] x13: 00000000000009f8 x12: 0000000000000018
[10919.635170] x11: 0000000000000000 x10: 0000000000000000
[10919.640467] x9 : fffffe00108cd168 x8 : 0000000000000000
[10919.645763] x7 : 0000000000000020 x6 : 0000000000000001
[10919.651059] x5 : 0000000000000002 x4 : 0000000000000001
[10919.656356] x3 : 0000000000000000 x2 : 0000000000000000
[10919.661652] x1 : fffffe836eb40000 x0 : 0000000000000000
[10919.666949] Call trace:
[10919.669382] etm_event_start+0xf8/0x100
[10919.673203] etm_event_add+0x40/0x60
[10919.676765] event_sched_in.isra.134+0xcc/0x210
[10919.681281] merge_sched_in+0xb0/0x2a8
[10919.685017] visit_groups_merge.constprop.140+0x15c/0x4b8
[10919.690400] ctx_sched_in+0x15c/0x170
[10919.694048] perf_event_sched_in+0x6c/0xa0
[10919.698130] ctx_resched+0x60/0xa0
[10919.701517] perf_event_exec+0x288/0x2f0
[10919.705425] begin_new_exec+0x4c8/0xf58
[10919.709247] load_elf_binary+0x66c/0xf30
[10919.713155] exec_binprm+0x15c/0x450
[10919.716716] __do_execve_file+0x508/0x748
[10919.720711] __arm64_sys_execve+0x40/0x50
[10919.724707] do_el0_svc+0xf4/0x1b8
[10919.728095] el0_sync_handler+0xf8/0x124
[10919.732003] el0_sync+0x140/0x180
Even though we don't support using separate sinks for the ETMs yet (e.g,
for 1:1 configurations), we should at least honor the user's choice and
handle the limitations gracefully, by simply skipping the tracing on ETMs
which can't reach the requested sink.
Fixes: f9d81a657b ("coresight: perf: Allow tracing on hotplugged CPUs")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Reported-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-11-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deadlock as below is triggered by one CPU holds drvdata->spinlock
and calls cti_enable_hw(). Smp_call_function_single() is called
in cti_enable_hw() and tries to let another CPU write CTI registers.
That CPU is trying to get drvdata->spinlock in cti_cpu_pm_notify()
and doesn't response to IPI from smp_call_function_single().
[ 988.335937] CPU: 6 PID: 10258 Comm: sh Tainted: G W L
5.8.0-rc6-mainline-16783-gc38daa79b26b-dirty #1
[ 988.346364] Hardware name: Thundercomm Dragonboard 845c (DT)
[ 988.352073] pstate: 20400005 (nzCv daif +PAN -UAO BTYPE=--)
[ 988.357689] pc : smp_call_function_single+0x158/0x1b8
[ 988.362782] lr : smp_call_function_single+0x124/0x1b8
...
[ 988.451638] Call trace:
[ 988.454119] smp_call_function_single+0x158/0x1b8
[ 988.458866] cti_enable+0xb4/0xf8 [coresight_cti]
[ 988.463618] coresight_control_assoc_ectdev+0x6c/0x128 [coresight]
[ 988.469855] coresight_enable+0x1f0/0x364 [coresight]
[ 988.474957] enable_source_store+0x5c/0x9c [coresight]
[ 988.480140] dev_attr_store+0x14/0x28
[ 988.483839] sysfs_kf_write+0x38/0x4c
[ 988.487532] kernfs_fop_write+0x1c0/0x2b0
[ 988.491585] vfs_write+0xfc/0x300
[ 988.494931] ksys_write+0x78/0xe0
[ 988.498283] __arm64_sys_write+0x18/0x20
[ 988.502240] el0_svc_common+0x98/0x160
[ 988.506024] do_el0_svc+0x78/0x80
[ 988.509377] el0_sync_handler+0xd4/0x270
[ 988.513337] el0_sync+0x164/0x180
This change write CTI registers directly in cti_enable_hw().
Config->hw_powered has been checked to be true with spinlock holded.
CTI is powered and can be programmed until spinlock is released.
Fixes: 6a0953ce7d ("coresight: cti: Add CPU idle pm notifer to CTI devices")
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
[Re-ordered variable declaration]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-10-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The member @nr_addr_cmp is not a bool value, using operator '>'
instead to avoid unexpected failure.
Fixes: a77de2637c ("coresight: etm4x: moving sysFS entries to a dedicated file")
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Jonathan Zhou <jonathan.zhouwen@huawei.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-9-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moving from using an address filter to trace the default "all addresses"
range to no filtering to acheive the same result, has caused the perf
filtering of kernel/user address spaces from not working unless an
explicit address filter was used.
This is due to the original code using a side-effect of the address
filtering rather than setting the global TRCVICTLR exception level
filtering.
The use of the mode sysfs file is also similarly affected.
A helper function is added to fix both instances.
Fixes: ae2041510d ("coresight: etmv4: Update default filter and initialisation")
Reported-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20200916191737.4001561-8-mathieu.poirier@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
