The common kernel pattern is to check for error, not success. Flip the if
statement accordingly and keep the main flow unindented.
Link: https://lore.kernel.org/r/20200706120343.10816-2-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Michael Guralnik says:
====================
This series handles IPoIB child interface creation with setting
interface's HW address.
In current implementation, lladdr requested by user is ignored and
overwritten. Child interface gets the same GID as the parent interface and
a QP number which is assigned by the underlying drivers.
In this series we fix this behavior so that user's requested address is
assigned to the newly created interface.
As specific QP number request is not supported for all vendors, QP number
requested by user will still be overwritten when this is not supported.
Behavior of creation of child interfaces through the sysfs mechanism or
without specifying a requested address, stays the same.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.
* branch 'mlx5_ipoib_qpn':
RDMA/ipoib: Handle user-supplied address when creating child
net/mlx5: Enable QP number request when creating IPoIB underlay QP
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Use the address supplied by user when creating a child interface.
Previously, the address requested by the user was ignored and overridden
with parent's GID and the random QP number assigned to the child.
Link: https://lore.kernel.org/r/20200623110105.1225750-3-leon@kernel.org
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If in the process of creating the underlay QP for an IPoIB interface
the user has set the address and specifically the 1st-3rd bytes
representing the QP number, use the requested QP number when creating
the underlay QP.
For a user to be able to request a QP number on QP creation, the MKEY_BY_NAME
NVCONFIG should be set. As mkey_by_name and qp_by_name are coupled in FW.
This requires driver to query the mkey_by_name max cap during initialization
and set the current cap if it was enabled in FW.
Signed-off-by: Michael Guralnik <michaelgur@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
For debugging purpose it will be easier to understand if prefetch works
okay if it has its own counter. Introduce ODP prefetch counter and count
per MR the total number of prefetched pages.
In addition remove comment which is not relevant anymore and anyway not in
the correct place.
Link: https://lore.kernel.org/r/20200621104147.53795-1-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ib_unregister_device_queued() can only be used by drivers using the new
dealloc_device callback flow, and it has a safety WARN_ON to ensure
drivers are using it properly.
However, if unregister and register are raced there is a special
destruction path that maintains the uniform error handling semantic of
'caller does ib_dealloc_device() on failure'. This requires disabling the
dealloc_device callback which triggers the WARN_ON.
Instead of using NULL to disable the callback use a special function
pointer so the WARN_ON does not trigger.
Fixes: d0899892ed ("RDMA/device: Provide APIs from the core code to help unregistration")
Link: https://lore.kernel.org/r/0-v1-a36d512e0a99+762-syz_dealloc_driver_jgg@nvidia.com
Reported-by: syzbot+4088ed905e4ae2b0e13b@syzkaller.appspotmail.com
Suggested-by: Hillf Danton <hdanton@sina.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
ipoib_mcast_carrier_on_task() insanely open codes a rtnl_lock() such that
the only time flush_workqueue() can be called is if it also clears
IPOIB_FLAG_OPER_UP.
Thus the flush inside ipoib_flush_ah() will deadlock if it gets unlucky
enough, and lockdep doesn't help us to find it early:
CPU0 CPU1 CPU2
__ipoib_ib_dev_flush()
down_read(vlan_rwsem)
ipoib_vlan_add()
rtnl_trylock()
down_write(vlan_rwsem)
ipoib_mcast_carrier_on_task()
while (!rtnl_trylock())
msleep(20);
ipoib_flush_ah()
flush_workqueue(priv->wq)
Clean up the ah_reaper related functions and lifecycle to make sense:
- Start/Stop of the reaper should only be done in open/stop NDOs, not in
any other places
- cancel and flush of the reaper should only happen in the stop NDO.
cancel is only functional when combined with IPOIB_STOP_REAPER.
- Non-stop places were flushing the AH's just need to flush out dead AH's
synchronously and ignore the background task completely. It is fully
locked and harmless to leave running.
Which ultimately fixes the ABBA deadlock by removing the unnecessary
flush_workqueue() from the problematic place under the vlan_rwsem.
Fixes: efc82eeeae ("IB/ipoib: No longer use flush as a parameter")
Link: https://lore.kernel.org/r/20200625174219.290842-1-kamalheib1@gmail.com
Reported-by: Kamal Heib <kheib@redhat.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
pcie_speeds() and restore_pci_variables() returns PCIBIOS_ error codes
from PCIe capability accessors.
PCIBIOS_ error codes have positive values. Passing on these values is
inconsistent with functions which return only a negative value on failure.
Before passing on the return value of PCIe capability accessors, call
pcibios_err_to_errno() to convert any positive PCIBIOS_ error codes to
negative generic error values.
Link: https://lore.kernel.org/r/20200615073225.24061-3-refactormyself@gmail.com
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Bolarinwa Olayemi Saheed <refactormyself@gmail.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add explicit WQE segment structures for the TLS static and progress
params.
According to the HW spec, TISN is not part of the progress params context,
take it out of it.
Rename the control segment tisn field as it could hold either a TIS or
a TIR number.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The RWQ table is used for RSS uverbs and not in used for the kernel
consumers, delete ib_create_rwq_ind_table() routine that is not
called at all.
Link: https://lore.kernel.org/r/20200624105422.1452290-5-leon@kernel.org
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The cancel_delayed_work can be called under lock since it doesn't sleep.
This makes the RMPP_STATE_CANCELING state not needed anymore, remove it.
Link: https://lore.kernel.org/r/20200621104738.54850-5-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The refcount API provides better safety than atomics API. Therefore,
change atomic functions to refcount functions.
Link: https://lore.kernel.org/r/20200621104738.54850-4-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Replace calls of atomic_dec() to mad_agent_priv->refcount with calls to
deref_mad_agent() in order to issue complete. Most likely the refcount is
> 1 at these points, but it is difficult to prove. Performance is not
important on these paths, so be obviously correct.
Link: https://lore.kernel.org/r/20200621104738.54850-3-leon@kernel.org
Signed-off-by: Shay Drory <shayd@mellanox.com>
Reviewed-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Maor Gottlieb says:
====================
The following series adds support to get the RDMA resource data in RAW
format. The main motivation for doing this is to enable vendors to return
the entire QP/CQ/MR data without a need from the vendor to set each
field separately.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies
* branch 'raw_dumps':
RDMA/mlx5: Add support to get MR resource in RAW format
RDMA/mlx5: Add support to get CQ resource in RAW format
RDMA/mlx5: Add support to get QP resource in RAW format
RDMA: Add support to dump resource tracker in RAW format
RDMA: Add dedicated CM_ID resource tracker function
RDMA: Add dedicated QP resource tracker function
RDMA: Add a dedicated CQ resource tracker function
RDMA: Add dedicated MR resource tracker function
RDMA/core: Don't call fill_res_entry for PD
net/mlx5: Add support in query QP, CQ and MKEY segments
net/mlx5: Export resource dump interface
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to get MR (mkey) resource dump in RAW format.
Link: https://lore.kernel.org/r/20200623113043.1228482-12-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to get CQ resource dump in RAW format.
Link: https://lore.kernel.org/r/20200623113043.1228482-11-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add a generic function to use the resource dump mechanism to get the
QP resource data.
Link: https://lore.kernel.org/r/20200623113043.1228482-10-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to get resource dump in raw format. It enable drivers to
return the entire device specific QP/CQ/MR context without a need from the
driver to set each field separately.
The raw query returns only the device specific data, general data is still
returned by using the existing queries.
Example:
$ rdma res show mr dev mlx5_1 mrn 2 -r -j
[{"ifindex":7,"ifname":"mlx5_1",
"data":[0,4,255,254,0,0,0,0,0,0,0,0,16,28,0,216,...]}]
Link: https://lore.kernel.org/r/20200623113043.1228482-9-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a cm id,
add a dedicated callback function. In addition remove fill_res_entry which
is not used anymore.
Link: https://lore.kernel.org/r/20200623113043.1228482-8-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a QP, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-7-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a CQ, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-6-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In order to avoid double multiplexing of the resource when it is a MR, add
a dedicated callback function.
Link: https://lore.kernel.org/r/20200623113043.1228482-5-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
None of the drivers implement it, remove it.
Link: https://lore.kernel.org/r/20200623113043.1228482-4-leon@kernel.org
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Introduce new resource dump segments - PRM_QUERY_QP,
PRM_QUERY_CQ and PRM_QUERY_MKEY. These segments contains the resource
dump in PRM query format.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Export some of the resource dump API. mlx5_ib driver will use
it in downstream patches.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Silence documentation build warnings by correcting kernel-doc comments.
./drivers/infiniband/core/verbs.c:1004: warning: Function parameter or member 'uobject' not described in 'ib_create_srq_user'
./drivers/infiniband/core/verbs.c:1004: warning: Function parameter or member 'udata' not described in 'ib_create_srq_user'
./drivers/infiniband/core/umem_odp.c:161: warning: Function parameter or member 'ops' not described in 'ib_umem_odp_alloc_child'
./drivers/infiniband/core/umem_odp.c:225: warning: Function parameter or member 'ops' not described in 'ib_umem_odp_get'
./drivers/infiniband/sw/rdmavt/ah.c:104: warning: Excess function parameter 'ah_attr' description in 'rvt_create_ah'
./drivers/infiniband/sw/rdmavt/ah.c:104: warning: Excess function parameter 'create_flags' description in 'rvt_create_ah'
./drivers/infiniband/ulp/iser/iscsi_iser.h:363: warning: Function parameter or member 'all_list' not described in 'iser_fr_desc'
./drivers/infiniband/ulp/iser/iscsi_iser.h:377: warning: Function parameter or member 'all_list' not described in 'iser_fr_pool'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd0' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd1' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd2' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd3' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:148: warning: Function parameter or member 'rsvd4' not described in 'opa_vesw_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd0' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd1' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd2' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:205: warning: Function parameter or member 'rsvd3' not described in 'opa_per_veswport_info'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:342: warning: Function parameter or member 'reserved' not described in 'opa_veswport_summary_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd0' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd1' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd2' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd3' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd4' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd5' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd6' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd7' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd8' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:394: warning: Function parameter or member 'rsvd9' not described in 'opa_veswport_error_counters'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:460: warning: Function parameter or member 'reserved' not described in 'opa_vnic_vema_mad'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:485: warning: Function parameter or member 'reserved' not described in 'opa_vnic_notice_attr'
./drivers/infiniband/ulp/opa_vnic/opa_vnic_encap.h:500: warning: Function parameter or member 'reserved' not described in 'opa_vnic_vema_mad_trap'
Link: https://lore.kernel.org/r/5373936.DvuYhMxLoT@laptop.coltonlewis.name
Signed-off-by: Colton Lewis <colton.w.lewis@protonmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
-----BEGIN PGP SIGNATURE-----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=nILH
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"Three small patches to fix problems in the SELinux code, all found via
clang.
Two patches fix potential double-free conditions and one fixes an
undefined return value"
* tag 'selinux-pr-20200621' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix undefined return of cond_evaluate_expr
selinux: fix a double free in cond_read_node()/cond_read_list()
selinux: fix double free
- Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
twice without a unique irqchip struct.
- Use the noirq variants of the suspend and resume callbacks in
the Tegra driver.
- Clean up the errorpath on the MCP23s08 driver.
- Revert the use of devm_of_iomap() in the Freescale driver as
it was regressing the platform.
- Add some missing pins in the Qualcomm IPQ6018 driver.
- Fix a simple documentation bug in the pinctrl-single driver.
-----BEGIN PGP SIGNATURE-----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=g/Xm
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
"Some early fixes collected during the first week after the merge
window, all pretty self-evident, with the details below. The revert is
the crucial thing.
- Fix a warning on the Qualcomm SPMI GPIO chip being instatiated
twice without a unique irqchip struct
- Use the noirq variants of the suspend and resume callbacks in the
Tegra driver
- Clean up the errorpath on the MCP23s08 driver
- Revert the use of devm_of_iomap() in the Freescale driver as it was
regressing the platform
- Add some missing pins in the Qualcomm IPQ6018 driver
- Fix a simple documentation bug in the pinctrl-single driver"
* tag 'pinctrl-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: single: fix function name in documentation
pinctrl: qcom: ipq6018 Add missing pins in qpic pin group
Revert "pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'"
pinctrl: mcp23s08: Split to three parts: fix ptr_ret.cocci warnings
pinctrl: tegra: Use noirq suspend/resume callbacks
pinctrl: qcom: spmi-gpio: fix warning about irq chip reusage
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable compile
option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl7vkn4VHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsG69MP/Raf/dW6GEHsUu7McIM3/HmNkjKh
6oBaD3NyY2TTjL/BtM18GmUuQTfeLG60UitPYVwvzVom/88JLQYzKmLFcwEH+KMz
7Bv/UukTXq4OjcmafG/h47BMYZTZ3No4Z+kMWzHe8HU8w+adfMh578nK5JeDz/1/
wY/xn+/OeXGcpEyjpR/rS9XCxKTYdEF6NwPknHhjGK3+byn3oqsZ3yRc+WwYumOD
UvXT2KE8krCJjTQ4kKUY3Q+jzZiKEuHEEcWI6AdHLXADpUll60DBc/5OgW75+6NA
FYOU2Ocuq+D8Q8wifMBKXjhN5ci/I8/h+aGvE2M05IbXN9BqMw6sbf/SEY0j2Saq
+p2AB4hbCzrFMtUTK2Al+bhV5tPYukQQqKpIRnhZe3NwJwX3EMtmAokbBtR/oD4i
yN28JZhosCggVV3o/9wFyWzq6fr376SSoHDogAtPOefvJVRQKHmavdnHk68ixkAk
itntVrMS2T/wB5esnAMiiCY4zdWwXd+OTceN2sxgdxxXZ+IklAbJG5IemUnys9Ts
eZ1IbIaopTKriWyOIjmlKP4dVbSqHVkHSovZFACu4PcKyvpIJtZhigFQJyXIDGho
GDsrgXRRykYiG42wu1l4zHyI9O76XXqweCJobyURN/JmQ2wUPahczEROH0rPJG5H
SEr1yjd7KaMxu5mx
=IAng
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix -gz=zlib compiler option test for CONFIG_DEBUG_INFO_COMPRESSED
- improve cc-option in scripts/Kbuild.include to clean up temp files
- improve cc-option in scripts/Kconfig.include for more reliable
compile option test
- do not copy modules.builtin by 'make install' because it would break
existing systems
- use 'userprogs' syntax for watch_queue sample
* tag 'kbuild-fixes-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
samples: watch_queue: build sample program for target architecture
Revert "Makefile: install modules.builtin even if CONFIG_MODULES=n"
scripts: Fix typo in headers_install.sh
kconfig: unify cc-option and as-option
kbuild: improve cc-option to clean up all temporary files
Makefile: Improve compressed debug info support detection
One fix for the interrupt rework we did last release which broke KVM-PR.
Three commits fixing some fallout from the READ_ONCE() changes interacting badly
with our 8xx 16K pages support, which uses a pte_t that is a structure of 4
actual PTEs.
A cleanup of the 8xx pte_update() to use the newly added pmd_off().
A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is enabled.
A minor fix for the SPU syscall generation.
Thanks to:
Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike Rapoport,
Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAl7vNVsTHG1wZUBlbGxl
cm1hbi5pZC5hdQAKCRBR6+o8yOGlgO3rD/46cXJQ9AMQqtZh3+sgWu95Zd6JOviL
vfhWeH/kbt/p6OGPoLXoYChoFD44Mf7BmTEDflslYICrxvhu9zI2lYN+948zfrEY
lIjjP+Dd6fr1D2o3+hnOOX/LHAVyyZJTsZp5i6ehTOXeUw8KOCF1ulVB3o5GgQK0
I/0oewL/SXNFnZS5qLgF2/OFS/BH3OnDG6mpICxCetZC9mNbHrTzos403ijyrvcX
AsE4JSzI2UM9kT0pWXLa9QR3RgfBZ4wtMrnKAwdGI/E+YqAa7TuHZatPDAqoCJYY
aePEZdweaeLWHQaQYSqlNP7YLAHuSdvZ2SvU65c2EKaaXug9sZJImyboJl/fo0Xo
EtZiVbfaTfqsyi7EVQnsLMFYmtquacXoUH//nIoTro4pRkeMsM94BiK2HISa+8Bs
KGQxBsnK2UaTgWERZHiK2VaKY/Tl1vGs09u7R21GiE2aD25ly+/q1Uo+WUr6iRKh
1v42AsH1VCeEZKAog43gBGOr7bCez8/90GNtTJnKTKndSRSybCH68ME/zBKdNACn
A7M9E0CNNjTOQNJyQ2UhyiBJzUK6kT/5g+C4mEH5WG4FkO6YHT1JyEusvsfj6Oe9
RwDr98iNuM8AhaT30XmUXithDAl6JA5+3S0OcC2bL2xQ0O/VBPGZhIzgSFU8T7BY
qpDj8l/8zk64Fw==
=qws5
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- One fix for the interrupt rework we did last release which broke
KVM-PR
- Three commits fixing some fallout from the READ_ONCE() changes
interacting badly with our 8xx 16K pages support, which uses a pte_t
that is a structure of 4 actual PTEs
- A cleanup of the 8xx pte_update() to use the newly added pmd_off()
- A fix for a crash when handling an oops if CONFIG_DEBUG_VIRTUAL is
enabled
- A minor fix for the SPU syscall generation
Thanks to Aneesh Kumar K.V, Christian Zigotzky, Christophe Leroy, Mike
Rapoport, Nicholas Piggin.
* tag 'powerpc-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/8xx: Provide ptep_get() with 16k pages
mm: Allow arches to provide ptep_get()
mm/gup: Use huge_ptep_get() in gup_hugepte()
powerpc/syscalls: Use the number when building SPU syscall table
powerpc/8xx: use pmd_off() to access a PMD entry in pte_update()
powerpc/64s: Fix KVM interrupt using wrong save area
powerpc: Fix kernel crash in show_instructions() w/DEBUG_VIRTUAL
This userspace program includes UAPI headers exported to usr/include/.
'make headers' always works for the target architecture (i.e. the same
architecture as the kernel), so the sample program should be built for
the target as well. Kbuild now supports 'userprogs' for that.
I also guarded the CONFIG option by 'depends on CC_CAN_LINK' because
$(CC) may not provide libc.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit e0b250b57d,
which broke build systems that need to install files to a certain
path, but do not set INSTALL_MOD_PATH when invoking 'make install'.
$ make INSTALL_PATH=/tmp/destdir install
mkdir: cannot create directory ‘/lib/modules/5.8.0-rc1+/’: Permission denied
Makefile:1342: recipe for target '_builtin_inst_' failed
make: *** [_builtin_inst_] Error 1
While modules.builtin is useful also for CONFIG_MODULES=n, this change
in the behavior is quite unexpected. Maybe "make modules_install"
can install modules.builtin irrespective of CONFIG_MODULES as Jonas
originally suggested.
Anyway, that commit should be reverted ASAP.
Reported-by: Douglas Anderson <dianders@chromium.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Cc: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
One minor fix and two patches reworking the ata dma drain for the
!CONFIG_LIBATA case. The latter is a regression fix for cc97923a5b
("block: move dma drain handling to scsi")
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCXu5JliYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcWzAP0SdVNo
4pWvdzaqxBqdoe0UlKygfyDUI2/d2682v9qcsgEA1mfpI6NHbmwAftO63t6kF+ll
PPNnsJKcjYph5MrJzkk=
=+54z
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"One minor fix and two patches reworking the ata dma drain for the
!CONFIG_LIBATA case. The latter is a 5.7 regression fix"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers
scsi: libata: Provide an ata_scsi_dma_need_drain stub for !CONFIG_ATA
scsi: ufs-bsg: Fix runtime PM imbalance on error
Pull i2c fixes from Wolfram Sang:
- a small collection of remaining API conversion patches (all acked)
which allow to finally remove the deprecated API
- some documentation fixes and a MAINTAINERS addition
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add robert and myself as qcom i2c cci maintainers
i2c: smbus: Fix spelling mistake in the comments
Documentation/i2c: SMBus start signal is S not A
i2c: remove deprecated i2c_new_device API
Documentation: media: convert to use i2c_new_client_device()
video: backlight: tosa_lcd: convert to use i2c_new_client_device()
x86/platform/intel-mid: convert to use i2c_new_client_device()
drm: encoder_slave: use new I2C API
drm: encoder_slave: fix refcouting error for modules
Use the correct the function name in the documentation for
"pcs_parse_one_pinctrl_entry()".
"smux_parse_one_pinctrl_entry()" appears to be an artifact from the
development of a prior patch series ("simple pinmux driver") which
transformed into pinctrl-single.
Signed-off-by: Drew Fustini <drew@beagleboard.org>
Link: https://lore.kernel.org/r/20200612112758.GA3407886@x1
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXu1jrRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoCMAP91nOccE3X+Nvc3zET3isDWnl1tWJxk
icsBgN/JwBRuTAD/dnWTHIWM2/5lTiagvyVsmINdJHP6JLr8T7dpN9tlxAQ=
=Cuo7
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Have recordmcount work with > 64K sections (to support LTO)
- kprobe RCU fixes
- Correct a kprobe critical section with missing mutex
- Remove redundant arch_disarm_kprobe() call
- Fix lockup when kretprobe triggers within kprobe_flush_task()
- Fix memory leak in fetch_op_data operations
- Fix sleep in atomic in ftrace trace array sample code
- Free up memory on failure in sample trace array code
- Fix incorrect reporting of function_graph fields in format file
- Fix quote within quote parsing in bootconfig
- Fix return value of bootconfig tool
- Add testcases for bootconfig tool
- Fix maybe uninitialized warning in ftrace pid file code
- Remove unused variable in tracing_iter_reset()
- Fix some typos
* tag 'trace-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Fix maybe-uninitialized compiler warning
tools/bootconfig: Add testcase for show-command and quotes test
tools/bootconfig: Fix to return 0 if succeeded to show the bootconfig
tools/bootconfig: Fix to use correct quotes for value
proc/bootconfig: Fix to use correct quotes for value
tracing: Remove unused event variable in tracing_iter_reset
tracing/probe: Fix memleak in fetch_op_data operations
trace: Fix typo in allocate_ftrace_ops()'s comment
tracing: Make ftrace packed events have align of 1
sample-trace-array: Remove trace_array 'sample-instance'
sample-trace-array: Fix sleeping function called from invalid context
kretprobe: Prevent triggering kretprobe from within kprobe_flush_task
kprobes: Remove redundant arch_disarm_kprobe() call
kprobes: Fix to protect kick_kprobe_optimizer() by kprobe_mutex
kprobes: Use non RCU traversal APIs on kprobe_tables if possible
kprobes: Suppress the suspicious RCU warning on kprobes
recordmcount: support >64k sections
- Fix the visibility of the region 'align' attribute. The new unit tests
for region alignment handling caught a corner case where the alignment
cannot be specified if the region is converted from static to dynamic
provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver. This includes both the standard
sysfs "health flags" that the nfit persistent memory driver publishes
and a mechanism for the ndctl tool to retrieve a health-command payload.
-----BEGIN PGP SIGNATURE-----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=qVy4
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"A feature (papr_scm health retrieval) and a fix (sysfs attribute
visibility) for v5.8.
Vaibhav explains in the merge commit below why missing v5.8 would be
painful and I agreed to try a -rc2 pull because only cosmetics kept
this out of -rc1 and his initial versions were posted in more than
enough time for v5.8 consideration:
'These patches are tied to specific features that were committed to
customers in upcoming distros releases (RHEL and SLES) whose
time-lines are tied to 5.8 kernel release.
Being able to track the health of an nvdimm is critical for our
customers that are running workloads leveraging papr-scm nvdimms.
Missing the 5.8 kernel would mean missing the distro timelines and
shifting forward the availability of this feature in distro kernels
by at least 6 months'
Summary:
- Fix the visibility of the region 'align' attribute.
The new unit tests for region alignment handling caught a corner
case where the alignment cannot be specified if the region is
converted from static to dynamic provisioning at runtime.
- Add support for device health retrieval for the persistent memory
supported by the papr_scm driver.
This includes both the standard sysfs "health flags" that the nfit
persistent memory driver publishes and a mechanism for the ndctl
tool to retrieve a health-command payload"
* tag 'libnvdimm-for-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/region: always show the 'align' attribute
powerpc/papr_scm: Implement support for PAPR_PDSM_HEALTH
ndctl/papr_scm,uapi: Add support for PAPR nvdimm specific methods
powerpc/papr_scm: Improve error logging and handling papr_scm_ndctl()
powerpc/papr_scm: Fetch nvdimm health information from PHYP
seq_buf: Export seq_buf_printf
powerpc: Document details on H_SCM_HEALTH hcall
The patch adds missing qpic data pins to qpic pingroup. These pins are
necessary for the qpic nand to work.
Fixes: ef1ea54eab ("pinctrl: qcom: Add ipq6018 pinctrl driver")
Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Link: https://lore.kernel.org/r/1592541089-17700-1-git-send-email-sivaprak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit ba40324261.
After commit 26d8cde526 ("pinctrl: freescale: imx: add shared
input select reg support"). i.MX7D has two iomux controllers
iomuxc and iomuxc-lpsr which share select_input register for
daisy chain settings.
If use 'devm_of_iomap()', when probe the iomuxc-lpsr, will call
devm_request_mem_region() for the region <0x30330000-0x3033ffff>
for the first time. Then, next time when probe the iomuxc, API
devm_platform_ioremap_resource() will also use the API
devm_request_mem_region() for the share region <0x30330000-0x3033ffff>
again, then cause issue, log like below:
[ 0.179561] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver
[ 0.191742] imx7d-pinctrl 30330000.pinctrl: can't request region for resource [mem 0x30330000-0x3033ffff]
[ 0.191842] imx7d-pinctrl: probe of 30330000.pinctrl failed with error -16
Fixes: ba40324261 ("pinctrl: freescale: imx: Use 'devm_of_iomap()' to avoid a resource leak in case of error in 'imx_pinctrl_probe()'")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/1591673223-1680-1-git-send-email-haibo.chen@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings.
- Cleanup unused pm callbacks in virtio ccw.
- Replace kmalloc + memset with kzalloc in crypto.
- Use $(LD) for vDSO linkage to make clang happy.
- Fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res().
- Fix workqueue cpumask warning when NUMA=n and nr_node_ids=2.
- Reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio.
- Few fixes to use scnprintf() instead of snprintf().
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAl7uJy8ACgkQjYWKoQLX
FBitMwgAovHP6O19ZS2RE2Ps20CjM+z0sLLGHF6aMrV7OqmOWrNnFzN4jT2j42Ck
idSZ6sehVd3Uj6K8NnzrlSS3sjGRhVaQJEjjN+rLyw0HBwxspJJfW5HgcoMtqNH1
oo+nt+zw5jk+6MqHx4QEwTxN5rgGs6UMhiLIAIlkDu4bivgohvGUxe4RUrN/mINx
cdYqomCkvovLT5sBTaWyXKNCDAdAWgNpOfdqc9MjOUXSbUg3lrUol0gUULzenPo7
wUN+sZ0di0Ox0+2+4m8LU1av/kMTLSSvnR9DW5KdpGTon1nwpZcdJnhI5o1v7uaU
pIaMOYNieEHJ2DnieR9iBBSbGoNCmw==
=gkgN
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- a few ptrace fixes mostly for strace and seccomp_bpf kernel tests
findings
- cleanup unused pm callbacks in virtio ccw
- replace kmalloc + memset with kzalloc in crypto
- use $(LD) for vDSO linkage to make clang happy
- fix vDSO clock_getres() to preserve the same behaviour as
posix_get_hrtimer_res()
- fix workqueue cpumask warning when NUMA=n and nr_node_ids=2
- reduce SLSB writes during input processing, improve warnings and
cleanup qdio_data usage in qdio
- a few fixes to use scnprintf() instead of snprintf()
* tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix syscall_get_error for compat processes
s390/qdio: warn about unexpected SLSB states
s390/qdio: clean up usage of qdio_data
s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES
s390/vdso: fix vDSO clock_getres()
s390/vdso: Use $(LD) instead of $(CC) to link vDSO
s390/protvirt: use scnprintf() instead of snprintf()
s390: use scnprintf() in sys_##_prefix##_##_name##_show
s390/crypto: use scnprintf() instead of snprintf()
s390/zcrypt: use kzalloc
s390/virtio: remove unused pm callbacks
s390/qdio: reduce SLSB writes during Input Queue processing
selftests/seccomp: s390 shares the syscall and return value register
s390/ptrace: fix setting syscall number
s390/ptrace: pass invalid syscall numbers to tracing
s390/ptrace: return -ENOSYS when invalid syscall is supplied
s390/seccomp: pass syscall arguments via seccomp_data
s390/qdio: fine-tune SLSB update
This contains three fixes that I'd like to target for rc2:
* A workaround for a compiler surprise related to the "r" inline assembly that
allows LLVM to boot.
* A fix to avoid WX-only mappings, which the ISA does not allow. While this
probably manifests in many ways, the bug was found in stress-ng.
* A missing lock in set_direct_map_*(), which due to a recent lockdep change
started asserting.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl7tRxkTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiaJZD/9hzS6fxNlcLaLyBLLroWLlWnwGAi7r
T3hTyNVo3EG/hHw0NGEWzqVuqjnuo0MAHDlTfkD7SuuBtj2PtZHVdX5JA9QsJF1j
KF3hz14GbbGuzOWlt6m+6KMU4r9+qX+0L3aqu0ShXVZhsHjKyuYTSHlwIRLzCzlQ
jcCVnrIQtq0pAcGylmL5s/9kVFGrpE6m1+Xm+mpPbgQCbqFMYCBVx8sb2EnEPv/X
TzgCzS8sjRG0FYIrquwxuHtKg+AlgmmaQw96fWOq9R4mJtNvcDFbaTT5MEqQYP6B
kljNf3DAdKG0QqKCtNC5BvgE+45BpQ67ZIUypG00Y0zViY2ZOjNGqGi7kzzIqOWG
IwwB6Gcb6CJnOWRJ2OlkDDdOe1VOvrE/ap+WEYE8Fb/TRQhdOjcHMzd9d/0JXe9R
XySr5gtpppKABJjBWmzGfqLRXby7qQFXR4BqnpPGuqR1Z0l5MaihN2mlpOZrDbMS
Y0j1vQuINBkoBqXBfqxCZb5gvwxHI+5lwFNy8chw8JZTOuvLYJ0s5bK8AF9fAGk8
7NCv+JCt2mrjMLRoZw7EFu4wqBTjjDXKP5AiiKHOCG9y4lokqLdATWirlWwScTt0
TvikaMYsDdiuhRpg0D0YCKGzQ9Cl23XvGe9fm6Ajhhkn6lONJD0/V/1i0MfY0+Nm
7TI46cNfvsUsWw==
=ZAlD
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- a workaround for a compiler surprise related to the "r" inline
assembly that allows LLVM to boot.
- a fix to avoid WX-only mappings, which the ISA does not allow. While
this probably manifests in many ways, the bug was found in stress-ng.
- a missing lock in set_direct_map_*(), which due to a recent lockdep
change started asserting.
* tag 'riscv-for-linus-5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Acquire mmap lock before invoking walk_page_range
RISC-V: Don't allow write+exec only page mapping request in mmap
riscv/atomic: Fix sign extension for RV64I
