the following:
- Rafal adds back the abort handler hook on BCM5301x which is required to silence
errors forwared from the PCIe controller that cannot be silenced at the PCIe RC level
-----BEGIN PGP SIGNATURE-----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=RdSo
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.10/soc' of http://github.com/Broadcom/stblinux into next/soc
Merge "Broadcom soc changes for 4.10" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoC changes for 4.10, please pull
the following:
- Rafal adds back the abort handler hook on BCM5301x which is required to silence
errors forwared from the PCIe controller that cannot be silenced at the PCIe RC level
* tag 'arm-soc/for-4.10/soc' of http://github.com/Broadcom/stblinux:
ARM: BCM5301X: Add back handler ignoring external imprecise aborts
* Identify SoC and register with the SoC bus
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=DnnT
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Merge "Renesas ARM Based SoC Match Updates for v4.10" from Simon Horman:
* Identify SoC and register with the SoC bus
* tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: Identify SoC and register with the SoC bus
ARM: shmobile: Document DT bindings for Product Register
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix SD card detect polarity
- Prevent Ethernet from picking a random mac address
- Fix error messages on platforms which dont use
bus master and emif priority settings.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mrAJ
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DT updates for v4.10 (part 3)" from Sekhar Nori:
Some fixes for device-tree patches already queued.
- Fix SD card detect polarity
- Prevent Ethernet from picking a random mac address
- Fix error messages on platforms which dont use
bus master and emif priority settings.
* tag 'davinci-for-v4.10/dt-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850: enable memctrl and mstpri nodes per board
ARM: dts: da850-lcdk: Add ethernet0 alias to DT
ARM: dts: da850-lcdk: fix mmc card detect polarity
and bus master priority settings needed for
stable LCDC operation on DA850.
Also adds support for MUSB device on DA850
providing USB OTG support.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYMaMqAAoJEGFBu2jqvgRNUPoP/2DBadMJGsCUpb/2jk3Z64UB
abTsFG3xhd7AmnpC3spsjXQXtbWrQ2cI1pskU18q1Em1FAxKbMhIRW1xLzZE8uwB
5/mhjmrHypIFnuf2UjNT7jfUyYbrkNUIcETGCx/CNwX7gJUvgeRX33HXF4AwiqNW
103tBYFEeNGVuJUJsJHZwPnZfg2Q38tiBZD5Z967KUz1U3Py/4PFQrjmqWU/9Xw3
y7vgWcM3TVKhHnuBoBAg3MNe0r0GS14a2sPbli3cIGkXqB2IV9Qq38sul7Ok8HrZ
wglTHPMvfG16ZAtWWlk/dbrDkInEKRtoG3J0Wxm3wZjLTwjhfxka8MF+saju1V89
AmZ3uw61K8BKTglwXO91imIHL4wnUgD+Nf+pMCNw0q+VmuyQN9a1evtZ3KN+tYvQ
K3l38pirqV6vRUAChOoX/2q12LHrYQzTQ57sC5qelMipTjVwJB8A49+4epYmpbAN
jhlsaCiKXDEzRXDfEoq8yd/+IDhCTtOwFHFD0oi3hVoaVmUB9foJPYgtnJs7qvG2
g2dKOX5b2AVWaS4dRQTP0/ZjEhLhZlNEwJLs8GYlKn4fPHI03tr0La2lbzMYi5wk
gQ2ZHZXvL49eGgYsmtwNVe3D5IX+rv2voPlfcZaimgaRZaw8RxgKNZQNsZkjKaxZ
Fye86Nbm1+DwVt+ELunQ
=GK5j
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt
Pull "DaVinci DT updates for v4.10 (part 2)" from Sekhar Nori:
Adds device tree nodes enabling DDR controller
and bus master priority settings needed for
stable LCDC operation on DA850.
Also adds support for MUSB device on DA850
providing USB OTG support.
* tag 'davinci-for-v4.10/dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: dts: da850-lcdk: Enable the usb otg device node
ARM: dts: da850: Add the usb otg device node
ARM: dts: da850: add the mstpri and ddrctl nodes
defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=pEwL
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/defconfig-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/defconfig
Pull "DaVinci defconfig updates for v4.10 (part 3)" from Sekhar Nori:
Enables newly introduced DDR controller and
master priority setting drivers in kernel.
Also, update defconfig to boot latest systemd
based filesystems on DA850.
A patch enabling USB OHCI support in davinci
defconfig.
* tag 'davinci-for-v4.10/defconfig-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci_all_defconfig: Enable OHCI as module
ARM: davinci_all_defconfig: add missing options for systemd
ARM: davinci_all_defconfig: enable the mstpri and ddrctl drivers
USB ohci device name to that used by drivers
and update of various board files to use gpio
descriptor API used by MMC subsystem for card
detect and write-protect detection.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYPAmpAAoJEGFBu2jqvgRNarAP/A2a+7nKXhUaxQaB7fIpeX0B
dXzFCm2s/Hvz6ox3yl30EZRcX10PAZCFFauSsrIV4dcvr+i5ecWYwHFuv185NHZf
b7WbvenYX6fqhzEpqcg9YxWtPK/ziuNhI0jUPcaNug7Pe47o8vnh0w4ZPHWEmjz6
KHxzjtLveqiKejDDrkVjjZV6wTmYfsIuxKyB/T6U1KfjZEoSc1aSBnZHtnIjanmm
ZNRVuwmrM6U4aGEB+rZvYa5hNV+fZEpte0qFUFhPsWW7aw6mP+40yKvFXLcDv7ty
jBzZSMIXMUwUAjuProWFThH7txZgkaWhPrud6bIQAKTT/9Wb/A6JTRBQXwhUfBGv
uY6GRNNe7YK73kZlgzB4ivhYqjq2lH2nbunpMqyBkrs6xHN33TXn/J8CixYrrp22
RjmYfznUugICmTqSe9+pXufP0PJe8oSx5WI4jxHry4Hn1X+V+07QL4TTzWKkGrPk
A8CRrSzHO5bQh3XJEU4BZ9z1Bo9wRJV02cOk4LrL2nz4kgCkks5qX0H1bJZtNgv2
93ITHOhJ6AeTM+Lj3hW89k96jSpu0JPTFpqaHb2qpw6lbuqhlagPYkbTv3yydORe
3HAMqHEYcs0vYGhYUv7bWrShWdIe+nKC9ror21t9V1iBWGC7uA15ySt3Adqqx6km
FUZzZdNGThckHvWUvTEf
=P8ea
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Pull "DaVinci SoC updates for v4.10 (part 3)" from Sekhar Nori:
mach-davinci SoC support updates to adjust
USB ohci device name to that used by drivers
and update of various board files to use gpio
descriptor API used by MMC subsystem for card
detect and write-protect detection.
* tag 'davinci-for-v4.10/soc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da830-evm: use gpio descriptor for mmc pins
ARM: davinci: da850-evm: use gpio descriptor for mmc pins
ARM: davinci: hawk: use gpio descriptor for mmc pins
ARM: davinci: da8xx: Fix ohci device name
for DT-boot.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cbuL
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.10/cleanup-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Pull DaVinci cleanup for v4.10 from Sekhar Nori:
mach-davinci cleanup to make it easy to add PM support
for DT-boot.
* tag 'davinci-for-v4.10/cleanup-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: PM: fix build when da850 not compiled in
ARM: davinci: PM: cleanup: remove references to pdata
ARM: davinci: PM: rework init, remove platform device
The CBC encryption routine should use the encryption round keys, not
the decryption round keys.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds one more missing SIMD select for AES_ARM_BS. It
also changes selects on ALGAPI to BLKCIPHER.
Fixes: 211f41af53 ("crypto: aesbs - Convert to skcipher")
Reported-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Several versions of DW DMAC have multi block transfers hardware
support. Hardware support of multi block transfers is disabled
by default if we use DT to configure DMAC and software emulation
of multi block transfers used instead.
Add multi-block property, so it is possible to enable hardware
multi block transfers (if present) via DT.
Switch from per device is_nollp variable to multi_block array
to be able enable/disable multi block transfers separately per
channel.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
- new tango NAND controller driver
- new ox820 NAND controller driver
- addition of a new full-ID entry in the nand_ids table
- rework of the s3c240 driver to support DT
- extension of the nand_sdr_timings to expose tCCS, tPROG and tR
- addition of a new flag to ask the core to wait for tCCS when sending
a RNDIN/RNDOUT command
- addition of a new flag to ask the core to let the controller driver
send the READ/PROGPAGE command
This pull request also contains minor fixes/cleanup/cosmetic changes:
- properly support 512 ECC step size in the sunxi driver
- improve the error messages in the pxa probe path
- fix module autoload in the omap2 driver
- cleanup of several nand drivers to return nand_scan{_tail}() error
code instead of returning -EIO
- various cleanups in the denali driver
- cleanups in the ooblayout handling (MTD core)
- fix an error check in nandsim
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=og/Y
-----END PGP SIGNATURE-----
Merge tag 'nand/for-4.10' of github.com:linux-nand/linux
From Boris Brezillon:
"""
This pull request contains the following notable changes:
- new tango NAND controller driver
- new ox820 NAND controller driver
- addition of a new full-ID entry in the nand_ids table
- rework of the s3c240 driver to support DT
- extension of the nand_sdr_timings to expose tCCS, tPROG and tR
- addition of a new flag to ask the core to wait for tCCS when sending
a RNDIN/RNDOUT command
- addition of a new flag to ask the core to let the controller driver
send the READ/PROGPAGE command
This pull request also contains minor fixes/cleanup/cosmetic changes:
- properly support 512 ECC step size in the sunxi driver
- improve the error messages in the pxa probe path
- fix module autoload in the omap2 driver
- cleanup of several nand drivers to return nand_scan{_tail}() error
code instead of returning -EIO
- various cleanups in the denali driver
- cleanups in the ooblayout handling (MTD core)
- fix an error check in nandsim
"""
We can allow modules to be loaded into the vmalloc region, where they
should also benefit from the same protections as those loaded into
the more efficient module region. Allow these functions to operate
there as well.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The set_memory_*() bounds checks are buggy on several fronts:
1. They fail to round the region size up if the passed address is not
page aligned.
2. The region check was incomplete, and didn't correspond with what
was being asked of apply_to_page_range()
So, rework change_memory_common() to fix these problems, adding an
"in_region()" helper to determine whether the start & size fit within
the provided region start and stop addresses.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch allows ARM guests to use GICv3 ITS on an arm64 host
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Wire-up flush_dcache, readq- and writeq-like gic-v3-its assessors, so
GICv3 ITS gets all it needs to be built and run.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
The skcipher conversion for ARM missed the select on CRYPTO_SIMD,
causing build failures if SIMD was not otherwise enabled.
Fixes: da40e7a4ba ("crypto: aes-ce - Convert to skcipher")
Fixes: 211f41af53 ("crypto: aesbs - Convert to skcipher")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently the memory controller and master priorities drivers are
enabled in da850.dtsi. For boards for which there are no settings
defined, this makes these drivers emit error messages.
Disable the nodes in da850.dtsi and only enable them for da850-lcdk -
the only board that currently needs them.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Currently the mmc driver is polling the gpio to know if the
card was removed.
By using a gpio descriptor instead of the platform callbacks,
the driver will be able to register the gpio using the mmc core
APIs designed for this purpose.
This has the advantage that an irq will be registered, and
polling is no longer needed. Also, a dependency on platform
callbacks is removed for this board.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[nsekhar@ti.com: minor commit message edit]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Currently the mmc driver is polling the gpio to know if the
card was removed.
By using a gpio descriptor instead of the platform callbacks,
the driver will be able to register the gpio using the mmc core
APIs designed for this purpose.
This has the advantage that an irq will be registered, and
polling is no longer needed. Also, a dependency on platform
callbacks is removed for this board.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[nsekhar@ti.com: minor commit message edit]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Currently the mmc driver is polling the gpio to know if the
card was removed.
By using a gpio descriptor instead of the platform callbacks,
the driver will be able to register the gpio using the mmc core
APIs designed for this purpose.
This has the advantage that an irq will be registered, and
polling is no longer needed. Also, a dependency on platform
callbacks is removed for this board.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
In order to avoid Linux generating a random mac address on every boot,
add an ethernet0 alias that will allow u-boot to patch the dtb with
the MAC address programmed into the EEPROM.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
udplite conflict is resolved by taking what 'net-next' did
which removed the backlog receive method assignment, since
it is no longer necessary.
Two entries were added to the non-priv ethtool operations
switch statement, one in 'net' and one in 'net-next, so
simple overlapping changes.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ARM fix from Russell King:
"This resolves the ksyms issues by reverting the commit which
introduced the breakage"
There was what I consider to be a better fix, but it's late in the rc
game, so I'll take the revert.
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
Revert "arm: move exports to definitions"
The usual bunch of DT additions, but most notably:
- A31 DRM driver
- A31 audio codec
- WiFi for the A80-Based boards and the CHIP
- Support for the NextThing Co CHIP Pro (the first board with NAND
enabled)
- New board: NanoPi M1
-----BEGIN PGP SIGNATURE-----
iQIcBAABCAAGBQJYNFgQAAoJEBx+YmzsjxAg8zAP/0j7VH8Vs0cPqk2fjS8g+aKH
26vHXWVWmBPjoUXHn+EtGxQZdWR8IU80nwrg2ZYfNqK6/4Z4krFTkfATY1EstNeL
Ps8O00P+sUoDV/VTeT4j9fby5kdsHod6fSGZD5aA7UL5s1jfCnp8ZrGqjeWs3LIB
fVMpqMwWBSOs6o0aw73eKv7K5sM+fDkGx7ziQg8f9SzTuAHj4gRocbJO8XwbcAvh
3JJ9SQnQV3CGaOP2d6vAWi457zAFF0nqo1IrsxLiMj0l3lq3taTPAEm9VH1SZwoD
UT2lQiOD3oggUCNJ6K+KN5EdqktLz+l0qkSyZHuKxxk49NvbKt2H78rGFuF1wa0d
cOPAXq+N3jzrZTzkFLxWTzaCLYBy48keVvSFMRZPZqsiMwuujEo6/UY5tBbwbq6u
4aVd3FaUIAM8sY65uj+lvZjdZvPZT0vh6lWDMNtAMT6jt6ZKaaIvLiXwAHsjntPa
WL9k2OOs47H6DVOFnL5nQm88bblHBVtMzTv4ouFIOLSiMAGsKlbR0uG5B6M0h6QB
nZ+kcWlpMVkHXfDnypvDGZiD3FHdatagkw5V5uGiYjB1CyH0r9DZRpiGhKSPFK7L
Mx0GSbWOLS+q0obCZ2DPhXGviRmYibLetKqBlZyxsOZjMDujDbDEjm2ZmRVBw7az
Qd9tS3YtTiWOXmL7HulQ
=cln8
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-4.10-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt
Pull "Allwinner DT additions for 4.10, bis" from Maxime Ripard:
The usual bunch of DT additions, but most notably:
- A31 DRM driver
- A31 audio codec
- WiFi for the A80-Based boards and the CHIP
- Support for the NextThing Co CHIP Pro (the first board with NAND
enabled)
- New board: NanoPi M1
* tag 'sunxi-dt-for-4.10-bis' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (41 commits)
ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge
ARM: dts: sun5i: Add touchscreen node to reference-design-tablet.dtsi
ARM: sunxi: Add the missing clocks to the pinctrl nodes
ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG
ARM: dts: sun7i: bananapi-m1-plus: Add PMIC regulators
ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support
ARM: sun8i: sina33: Enable USB gadget
ARM: dts: sun8i: reference-design-tablet: ldo_io1 is vcc-touchscreen
ARM: dts: sun8i: replace enable-sdio-wakeup with wakeup-source for BananaPi M1+
ARM: gr8: evb: Add i2s codec
ARM: dts: sun6i: sina31s: Enable internal audio codec
ARM: dts: sun6i: hummingbird: Enable internal audio codec
ARM: dts: sun6i: Add audio codec device node
ARM: gr8: evb: Enable SPDIF
ARM: dts: sun8i: Add SPI controller node in H3
ARM: dts: sun8i: Add SPI pinctrl node in H3
ARM: dts: sun8i: Add dts file for NanoPi M1 SBC
ARM: dts: sun8i: Use the common file in NanoPi NEO SBC
ARM: dts: sun8i: Add common dtsi file for NanoPi SBCs
ARM: dts: sun9i: cubieboard4: Enable AP6330 WiFi
...
remove legacy support of orion5x ls-chl
-----BEGIN PGP SIGNATURE-----
iGoEABECACoFAlgwDyEjHGdyZWdvcnkuY2xlbWVudEBmcmVlLWVsZWN0cm9ucy5j
b20ACgkQCwYYjhRyO9XvjwCffCGDTTvUAn1iBzbI+ijo3Zx1+iwAnAt3aa2pXiSI
Aya4ElGbmbfODIbo
=cSoP
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-4.10-1' of git://git.infradead.org/linux-mvebu into next/soc
Pull "mvebu soc for 4.10 (part 1)" from Gregory CLEMENT:
remove legacy support of orion5x ls-chl
* tag 'mvebu-soc-4.10-1' of git://git.infradead.org/linux-mvebu:
ARM: orion5x: remove legacy support of ls-chl
Add missing pinmux declaration for netgear NASes
Fix i2c compatible string for netgear NASes
Fix on a wrong comment about PLL frequency
Fix spelling mistake of the manufacturer's name of the Topkick
Add dt support for the orion5x ls-chl Linkstation device
First step of fixing DTC warning for Armada 370, 375 and XP
-----BEGIN PGP SIGNATURE-----
iGoEABECACoFAlgwC9wjHGdyZWdvcnkuY2xlbWVudEBmcmVlLWVsZWN0cm9ucy5j
b20ACgkQCwYYjhRyO9VAsgCfdqwKz5V7XP/xfkIUxoykhtrLL4QAoJlAAwV+UG2U
Gbvc3BMoymvienDl
=06ld
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.10-1' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu dt for 4.10 (part 1)" from Gregory CLEMENT:
Add missing pinmux declaration for netgear NASes
Fix i2c compatible string for netgear NASes
Fix on a wrong comment about PLL frequency
Fix spelling mistake of the manufacturer's name of the Topkick
Add dt support for the orion5x ls-chl Linkstation device
First step of fixing DTC warning for Armada 370, 375 and XP
* tag 'mvebu-dt-4.10-1' of git://git.infradead.org/linux-mvebu: (30 commits)
ARM: dts: armada-375: Fixup ethernet child DT warning
ARM: dts: armada-375: Fixup memory DT warning
ARM: dts: armada-375: Remove skeleton.dtsi
ARM: dts: armada-375: Fixup pinctrl DT warnings
ARM: dts: armada-375: Fixup pcie DT warnings
ARM: dts: armada-375: Fixup mdio DT warning
ARM: dts: armada-375: Use the node labels
ARM: dts: armada-375: Add node labels
ARM: dts: armada-370-xp: Fixup regulator DT warning
ARM: dts: armada-370-xp: Remove button address and fixup names
ARM: dts: armada-370-xp: Remove address from dsa unit name
ARM: dts: armada-370-xp: Fixup memory DT warning
ARM: dts: armada-370-xp: Fixup l2-cache DT warning
ARM: dts: armada-370-xp: Remove skeleton.dtsi
ARM: dts: armada-370: Fixup pcie DT warnings
ARM: dts: armada-xp: Fixup pcie DT warnings
ARM: dts: armada-370-xp: Fixup mdio DT warning
ARM: dts: armada-370-xp: Use the node labels
ARM: dts: armada-370-xp: add node labels
ARM: dts: armada-370-xp: move the cpurst node in the common file
...
from http://lkml.kernel.org/r/20161021085848.1754-1-narmstrong@baylibre.com
Changes since v1 Pull Request at : http://lkml.kernel.org/r/1305c61f-b1ef-7caf-7788-67e2b907e873@baylibre.com
- Clarify copyright dates in commit message
- Remove linux/arch/... lines from the top of the files
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Xa6Z
-----END PGP SIGNATURE-----
Merge tag 'oxnas-arm-soc-for-4.10-v2' of https://github.com/OXNAS/linux into next/soc
Pull "ARM: OXNAS SoC updates for 4.10" from Neil Armstrong:
- Add SMP support for the Oxford Semiconductor OX820 SoC
from http://lkml.kernel.org/r/20161021085848.1754-1-narmstrong@baylibre.com
Changes since v1 Pull Request at : http://lkml.kernel.org/r/1305c61f-b1ef-7caf-7788-67e2b907e873@baylibre.com
- Clarify copyright dates in commit message
- Remove linux/arch/... lines from the top of the files
* tag 'oxnas-arm-soc-for-4.10-v2' of https://github.com/OXNAS/linux:
ARM: oxnas: Add OX820 config and makefile entry
ARM: oxnas: Add OX820 SMP support
Add PCIe support to the ARTPEC-6 SoC. This uses the existing
pcie-artpec6 driver.
So, all that is needed is device tree entries in the DTS.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
Since the ARTPEC-6 machine port already uses syscon,
MACH_ARTPEC6 should select MFD_SYSCON.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Jesper Nilsson <jespern@axis.com>
Merge "IDE to PATA change in ARM defconfigs from Bartlomiej Zolnierkiewicz:
On Monday, October 31, 2016 07:14:13 PM Bartlomiej Zolnierkiewicz wrote:
> On Monday, October 31, 2016 03:46:22 PM Russell King - ARM Linux wrote:
> > On Wed, Oct 26, 2016 at 07:01:12PM +0200, Bartlomiej Zolnierkiewicz wrote:
> > > On Wednesday, July 13, 2016 04:37:31 PM Arnd Bergmann wrote:
> > > > I'd be fine with just getting a pull request with all the patches that
> > > > had no negative feedback and that were not already applied (if any).
> > >
> > > Here it is (sorry for taking so long).
> >
> > I've just been digging in the dmesg logs from when I was using the
> > Assabet+Neponset as my firewall, and it was having to use the IDE
> > ide-cs driver rather than the pata pcmcia driver.
> >
> > I don't recall whether the pata pcmcia driver was a problem or not,
> > as the PCMCIA interface can't cope with _any_ 32-bit accesses. I
> > think PATA tries to use the "highest" possible access size by
> > default...
>
> It doesn't actually - it defaults to 16-bits for PIO data access and
> you must explicitly enable 32-bits using ATA_PFLAG_PIO32 port flag
> (pata_pcmcia doesn't set it so it should be okay). Also taskfile
> registers are accessed using 8-bits access by default transport
> functions (which are used by pata_pcmcia).
Please also note that:
- assebet_defconfig currently doesn't even enable ide-cs
(CONFIG_BLK_DEV_IDECS) in the mainline kernel
- neponset_defconfig doesn't even enable IDE (CONFIG_IDE)
in the mainline kernel
so there is no risk of breaking anything..
* 'v4.9-rc2-arm-configs-pata' of https://github.com/bzolnier/linux:
arm: spitz_defconfig: convert to use libata PATA drivers
arm: s3c2410_defconfig: convert to use libata PATA drivers
arm: netwinder_defconfig: convert to use libata PATA drivers
arm: jornada720_defconfig: convert to use libata PATA drivers
arm: ixp4xx_defconfig: convert to use libata PATA drivers
arm: h3600_defconfig: convert to use libata PATA drivers
arm: corgi_defconfig: convert to use libata PATA drivers
arm: am200epdkit_defconfig: convert to use libata PATA drivers
arm: omap1_defconfig: convert to use libata PATA drivers
arm: collie_defconfig: convert to use libata PATA drivers
arm: shannon_defconfig: disable IDE subsystem
arm: mainstone_defconfig: disable IDE subsystem
arm: lart_defconfig: disable IDE subsystem
arm: cerfcube_defconfig: disable IDE subsystem
arm: badge4_defconfig: disable IDE subsystem
arm: assabet_defconfig: disable IDE subsystem
The I2C nodes are missing #address-cells and #size-cells.
This is causing warning at device tree compilation when
some I2C device sub-nodes are defined.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nQve
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v4.9-rc-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into fixes
Pull "STi DT fix" from Patrice Chotard:
The I2C nodes are missing #address-cells and #size-cells.
This is causing warning at device tree compilation when
some I2C device sub-nodes are defined.
* tag 'sti-dt-for-v4.9-rc-round2' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: fix i2c nodes
A renaming of the GR8 DTSI and DTS to make it explicitly part of the sun5i
family.
-----BEGIN PGP SIGNATURE-----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=Mw6R
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes
Pull "Allwinner fixes for 4.9, second iteration" from Maxime Ripard:
A renaming of the GR8 DTSI and DTS to make it explicitly part of the sun5i
family.
* tag 'sunxi-fixes-for-4.9-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: gr8: Rename the DTSI and relevant DTS
This machine is an open hardware router by cz.nic driven by a
Marvell Armada 385.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Tomas Hlavacek <tmshlvck@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch fixes the following DTC warnings with W=1:
Warning (unit_address_vs_reg): Node /regulators/regulator@0 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /regulators/regulator@1 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /regulators/regulator@2 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /regulators/regulator@3 has a unit
name, but no reg property
Warning (unit_address_vs_reg): Node /regulators/regulator@4 has a unit
name, but no reg property
Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
Add xo entry to sdhc clock node on all qcom platforms.
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add a device node for the Product Register, which provides SoC product
and revision information.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the SK-RZG1E board dependent part of the Ether device node.
Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the initial device tree for the R8A7745 SoC based SK-RZG1E board.
The board has 1 debug serial port (SCIF2); include support for it,
so that the serial console can work.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe the IRQC interrupt controller in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A7745 part of the Ether device node.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe [H]SCIF{|A|B} ports in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: consistently use tabs for indentation]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe SYS-DMAC0/1 in the R8A7745 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The initial R8A7745 SoC device tree including CPU0, GIC, timer, SYSC, RST,
CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the SK-RZG1M board dependent part of the Ether device node.
Enable DHCP and NFS root for the kernel booting.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Add the initial device tree for the R8A7743 SoC based SK-RZG1M board.
The board has one debug serial port (SCIF0); include support for it, so
that the serial console can work.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe the IRQC interrupt controller in the R8A7743 device tree.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Define the generic R8A7743 part of the Ether device node.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe [H]SCIF{|A|B} ports in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: consistently use tabs for indentation]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Describe SYS-DMAC0/1 in the R8A7743 device tree.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The initial R8A7743 SoC device tree including CPU0, GIC, timer, SYSC, RST,
CPG, and the required clock descriptions.
Based on the original (and large) patch by Dmitry Shifrin
<dmitry.shifrin@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
And the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
And the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add the sd-uhs-sdr104 property to SDHI0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Make it possible to fallback to GPIO for I2C4 on the EXIO-B connector.
This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Make it possible to fallback to GPIO for I2C1 on the EXIO-C connector.
This is based on reference work for the I2C0 core of the lager/r8a7790
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Make it possible to select which I2C1 IP core you want to run on the
EXIO-A connector.
This is based on reference work for the I2C0 core of the lager board
by Wolfram Sang.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased and fixed aliases]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The rename from i2cexio to i2cexio0 is in preparation for adding
i2cexio1 which will use the demuxer for IIC1/I2C1.
The reindexing from i2c8 to i2c10 is to allow space for grouping of
additional GPIO buses to be added by follow-up patches to support demuxing
of other i2c buses.
Also note that fallback to GPIO is not provided by the hardware for IIC0/I2C0.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
[wsa: rebased, fixed alias and removed typo in commit message]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The parent clock of the HSUSB clock is the HP clock, not the MP clock.
Fixes: c7bab9f929 ("ARM: shmobile: r8a7794: Add USB clocks to device tree")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Update the PFC pin groups and function names of DU interface for
r8a7794 ALT board.
The currently specified pin groups and function names prevented PFC and
DU interfaces from being correctly configured:
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
sh-pfc e6060000.pin-controller: function 'du' not supported
sh-pfc e6060000.pin-controller: invalid function du in map table
rcar-du: probe of feb00000.display failed with error -22
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Identify the SoC type and revision, and register this information with
the SoC bus, so it is available under /sys/devices/soc0/, and can be
checked where needed using soc_device_match().
Identification is done using the Product Register or Common Chip Code
Register, as declared in DT (PRR only for now), or using a hardcoded
fallback if missing.
Example:
Detected Renesas R-Car Gen2 r8a7791 ES1.0
...
# cat /sys/devices/soc0/{machine,family,soc_id,revision}
Koelsch
R-Car Gen2
r8a7791
ES1.0
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Odroid XU3/4 didn't need to use the cd-gpios for detecting card.
Because host controller has the CDETECT register through SDx_CDN line.
Host controller can know whether card is inserted or not with this
register.
When I have checked the Odroid XU3/4, they are using CDETECT register
(not using exteranl cd-gpio).
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
devicetree binding for stmmac states:
- compatible: Should be "snps,dwmac-<ip_version>", "snps,dwmac"
For backwards compatibility: "st,spear600-gmac" is also supported.
No functional change intended.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The AM571x-IDK board is a board based on TI's AM5718 SOC
which has a single core 1.5GHz A15 processor. This board is a
development platform for the Industrial market with:
- 1GB of DDR3L
- Dual 1Gbps Ethernet
- HDMI,
- PRU-ICSS
- uSD
- 16GB eMMC
- CAN
- RS-485
- PCIe
- USB3.0
- Video Input Port
- Industrial IO port and expansion connector
The link to the data sheet and TRM can be found here:
http://www.ti.com/product/AM5718
Initial support is only for basic peripherals.
Signed-off-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
OMAP2+ GPOs are initialized now using device tree, so legacy gpio
initialization code can be removed.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
phy-phandle is now a preferred method to reference a PHY device.
Especially in regards to cpsw it enables PHY specific settings like
max-speed etc. being specified in DTS.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PMICs have POWERHOLD set by default which prevents PMIC shutdown
even on DEV_CTRL On bit set to 0 as the Powerhold has higher priority.
So to enable pmic power off this property lets one over ride the default
value and enable pmic power off.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The PMICs have POWERHOLD set by default which prevents PMIC shutdown
even on DEV_CTRL On bit set to 0 as the Powerhold has higher priority.
So to enable pmic power off this property lets one over ride the default
value and enable pmic power off.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
While the clk lookup table is making reference to "ohci"
other subsystems (such as phy) are trying to match "ohci.0"
Since there is a single ohci instance, instead of changing
the clk name, change the dev id to -1, and add the "-da8xx"
postfix to match the driver name that will also be changed
in a subsequent patch.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This reverts commit 4dd1837d75.
Moving the exports for assembly code into the assembly files breaks
KSYM trimming, but also breaks modversions.
While fixing the KSYM trimming is trivial, fixing modversions brings
us to a technically worse position that we had prior to the above
change:
- We end up with the prototype definitions divorsed from everything
else, which means that adding or removing assembly level ksyms
become more fragile:
* if adding a new assembly ksyms export, a missed prototype in
asm-prototypes.h results in a successful build if no module in
the selected configuration makes use of the symbol.
* when removing a ksyms export, asm-prototypes.h will get forgotten,
with armksyms.c, you'll get a build error if you forget to touch
the file.
- We end up with the same amount of include files and prototypes,
they're just in a header file instead of a .c file with their
exports.
As for lines of code, we don't get much of a size reduction:
(original commit)
47 files changed, 131 insertions(+), 208 deletions(-)
(fix for ksyms trimming)
7 files changed, 18 insertions(+), 5 deletions(-)
(two fixes for modversions)
1 file changed, 34 insertions(+)
3 files changed, 7 insertions(+), 2 deletions(-)
which results in a net total of only 25 lines deleted.
As there does not seem to be much benefit from this change of approach,
revert the change.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Refactor the oxnas Kconfig entries among the OX810SE and OX820 configs,
and add the files to support the OX820 SMP feature.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The Oxford Semiconductor OX820 is a ARM11MPcore based SoC sharing some
features with the OX810 earlier SoC.
This patch adds the core to wake up the second core.
Clarifications about Copyrights dates :
- hotplug.c was taken from an old versatile code by Ma Haijun and left verbatim
- headsmp.S was taken from an old versatile code and adapted by Ma Haijun
- platsmp.c is a mix from versatile code, Ma Haijun code and my code for DT
Hence the 2002/2003 ARM Coryrights and 2013 Ma Haijun Copyrights.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The I2C nodes are missing #address-cells and #size-cells. This is
causing warning at device tree compilation when some I2C device
sub-nodes are defined.
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.
smp_call_function_single() has been removed because the function is already
invoked on the target CPU.
[ tglx: Added protection agaist hotplug back according to discussion with Will ]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: rt@linuxtronix.de
Cc: Will Deacon <will.deacon@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20161117183541.8588-16-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
All conflicts were simple overlapping changes except perhaps
for the Thunder driver.
That driver has a change_mtu method explicitly for sending
a message to the hardware. If that fails it returns an
error.
Normally a driver doesn't need an ndo_change_mtu method becuase those
are usually just range changes, which are now handled generically.
But since this extra operation is needed in the Thunder driver, it has
to stay.
However, if the message send fails we have to restore the original
MTU before the change because the entire call chain expects that if
an error is thrown by ndo_change_mtu then the MTU did not change.
Therefore code is added to nicvf_change_mtu to remember the original
MTU, and to restore it upon nicvf_update_hw_max_frs() failue.
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable the davinci ohci driver as a module for usb
tested with the omap138-lcdk board.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The Hummingbird A31 board has a VGA DAC which converts RGB output
from the LCD interface to VGA analog signals.
Add nodes for the VGA DAC, its power supply, and enable this part
of the display pipeline.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Just like on sun8i all sun5i tablets use the same interrupt and power
gpios for their touchscreens. I've checked all known a13 fex files and
only the UTOO P66 uses a different gpio for the interrupt.
Add a touchscreen node to sun5i-reference-design-tablet.dtsi, which
fills in the necessary gpios to avoid duplication in the tablet dts files,
just like we do in sun8i-reference-design-tablet.dtsi.
This will make future patches adding touchscreen nodes to a13 tablets
simpler.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The pin controllers also use the two oscillators for debouncing. Add them
to the DTs.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The Bananapi M1+ supports USB OTG, with the PMIC doing VBUS sensing.
Enable the USB OTG related functions.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Bananapi M1+, like other Allwinner A20 based boards, uses the
AXP209 PMIC to supply its power.
Add the AXP209 regulators.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The 2 USB host ports are directly tied to the 2 USB hosts in the SoC.
The 2 host pairs were already enabled, but the USB PHY wasn't.
VBUS on the 2 ports are always on.
Enable the USB PHY.
Fixes: 04c85ecad3 ("ARM: dts: sun7i: Add dts file for Bananapi M1 Plus
board")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The micro-USB on the SinA33 has a somewhat interesting design in the sense
that it has a micro USB connector, but the VBUS is (supposed to be)
controlled through an (unpopulated) jumper.
Obviously, that doesn't work really well, and only the peripheral mode
really works. Still enable it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
On some Q8 and other tablets ldo_io1 is used as vcc-touchscreen,
config at as such in sun8i-reference-design-tablet.dtsi.
Note that it will only be enabled when it us actually referenced by
a foo-supply property in the touchscreen node, so for tablets which
do not use ldo_io1 as vcc-touchscreen, it will be disabled.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Though the mmc core driver will continue to support the legacy
"enable-sdio-wakeup" property to enable SDIO as the wakeup source,
"wakeup-source" is the new standard binding.
This patch replaces the legacy "enable-sdio-wakeup" with the unified
"wakeup-source" property in order to avoid any further copy-paste
duplication.
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The GR8-EVB comes with a wm8978 codec connected to the i2s bus.
Add a card in order to have it working
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The SinA31s routes the SoC's LINEOUT pins to a line out jack, and MIC1
to a microphone jack, with MBIAS providing phantom power.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Hummingbird A31 has headset and line in audio jacks and an onboard
mic routed to the pins for the SoC's internal codec. The line out pins
are routed to an onboard speaker amp, whose output is available on a
pin header.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A31 SoC includes the Allwinner audio codec, capable of 24-bit
playback up to 192 kHz and 24-bit capture up to 48 kHz.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The GR8-EVB has a SPDIF out connector. Enable it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
H3 SPI subsystem is almost same as A31 SPI except buffer size, so those
DT properties are reusable.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
H3 supports two SPI controllers. Four pins (MOSI, MISO, SCLK, SS) are
configured through the pinctrl subsystem.
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
NanoPi M1 is the Allwinner H3 based board.
This patch enables UART for debug console, LEDs, GPIO key switch, 3 USB
host ports, a micro SD slot and related power and pin controls by using
NanoPi common dtsi file.
Cc: James Pettigrew <james@innovum.com.au>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
NanoPi common dtsi supports all components of NEO SBC, so just include it.
Cc: James Pettigrew <james@innovum.com.au>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This patch provides a common file for NanoPi M1 and Neo SBC.
Those have common features below.
* UART0
* 2 LEDs
* USB host (EHCI3, OHCI3) and PHY
* MicroSD
* GPIO key switch
Cc: James Pettigrew <james@innovum.com.au>
Signed-off-by: Milo Kim <woogyom.kim@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The board has a Ampak AP6330 WiFi/BT/FM module. Inside it is a Broadcom
BCM4330 WiFi/BT/FM combo IC. The WiFi portion is connected to mmc1, with
the enabling pin connected to PL2. The AC100 RTC provides a low power
clock signal.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The board has a Ampak AP6330 WiFi/BT/FM module. Inside it is a Broadcom
BCM4330 WiFi/BT/FM combo IC. The WiFi portion is connected to mmc1, with
the enabling pin connected to PL2. The AC100 RTC provides a low power
clock signal.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
On the A80, mmc1 is available on pingroup G. Designs mostly use this
to connect to an SDIO WiFi chip.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The I2C1 and SPI2 buses are exposed on the CHIP headers, and are not
explicitly dedicated to anything.
Add them to the DTS with the muxing already set, but keep them disabled.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Some boards use the LCD in RGB565. Enable the pin muxing option.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
All the sun5i have the SPI2 pins exposed on the PE bank. Add them to the
DT.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The SPI2 pins on the sun5i PB bank are only available on the A10s. Rename
the A10s only bank so that it doesn't confuse people on the other SoCs
whose indexing would start at b.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The CHIP uses a 1-Wire bus to discover the DIPs. Enable the bus in the DT.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The WiFi chip is powered through a GPIO and two regulators in parallel.
Since that case is not supported yet, just set them as always on before we
rework the regulator framework to deal with those.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The CHIP Pro is a small embeddable board. It features a GR8, an AXP209
PMIC, a 512MB SLC NAND and a WiFi/BT chip.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The UART3 pins were missing from the DTSI. Add them.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The UART2 pins were missing from the DTSI. Add them.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The PWM controller has two different channels, but only the first pin was
exposed in the DTSI. Add the other one.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
There was a dumb copy and paste mistake here, fix it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The GR8 has access to the UART3 controller, which was missing in the
DTSI. Add it.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The LCD0 controller on the A31 can do RGB output up to 8 bits per
channel. Add the pins for RGB888 output.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The A31 has 2 parallel display pipelines, which can be intermixed.
However the driver currently only supports one of them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
sun7i-a20-olimex-som-evb.dts doesn't contain cpu-supply needed for
voltage-scaling with cpufreq-dt so define it.
The default voltages are defined in sun7i-a20.dtsi.
Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Now that we have support for the VGA bridges using our DRM driver, enable
the display engine for the Olimex A13-Olinuxino.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
The pinmux setting nodes for the A31 were added out of alphabetical
order. Sort them.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviews have found that sun5i was a better prefix after all for the GR8.
Rename the relevant device trees before it's too late.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
This is good for consistency even if there is no difference in compiled
code. LTO might rely on this eventually. No need to preserve the extern
attribute as it is the default with function prototypes.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Add a sysfs cpu_capacity attribute with which it is possible to read and
write (thus over-writing default values) CPUs capacity. This might be
useful in situations where values needs changing after boot.
The new attribute shows up as:
/sys/devices/system/cpu/cpu*/cpu_capacity
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
With the introduction of cpu capacity-dmips-mhz bindings, CPU capacities
can now be calculated from values extracted from DT and information
coming from cpufreq. Add parsing of DT information at boot time, and
complement it with cpufreq information. We keep code that can produce
same information, based on different DT properties and hard-coded
values, as fall-back for backward compatibility.
Caveat: the information provided by this patch will start to be used in
the future. We need to #define arch_scale_cpu_capacity to something
provided in arch, so that scheduler's default implementation (which gets
used if arch_scale_cpu_capacity is not defined) is overwritten.
Signed-off-by: Juri Lelli <juri.lelli@arm.com>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The polarity of the card detect pin is inverted.
Change it to reflect the right polarity for the board
which is ACTIVE_LOW.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
cleanups, GPIO line naming, and the node for the new thermal driver.
-----BEGIN PGP SIGNATURE-----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=CBTE
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=pDtt
-----END PGP SIGNATURE-----
Merge tag 'bcm2835-dt-next-2016-11-18' into devicetree/next
This pull request brings in DT changes for BCM2835: pinctrl setup
cleanups, GPIO line naming, and the node for the new thermal driver.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The Kconfig and file naming for the PM8xxx driver is totally
confusing:
- Kconfig options MFD_PM8XXX and MFD_PM8921_CORE, some in-kernel
users depending on or selecting either at random.
- A driver file named pm8921-core.c even if it is indeed
used by the whole PM8xxx family of chips.
- An irqchip named pm8xxx since it was (I guess) realized that
the driver was generic for all pm8xxx PMICs.
As I may want to add support for PM8901 this is starting to get
really messy. Fix this situation by:
- Remove the MFD_PM8921_CORE symbol and rely solely on MFD_PM8XXX
and convert all users, including LEDs Kconfig and ARM defconfigs
for qcom and multi_v7 to use that single symbol.
- Renaming the driver to qcom-pm8xxx.c to fit along the two
other qcom* prefixed drivers.
- Rename functions withing the driver from 8921 to 8xxx to
indicate it is generic.
- Just drop the =m config from the pxa_defconfig, I have no clue
why it is even there, it is not a Qualcomm platform. (Possibly
older Kconfig noise from saveconfig.)
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Pull ARM fixes from Russell King:
"A few more ARM fixes:
- the assembly backtrace code suffers problems with the new printk()
implementation which assumes that kernel messages without KERN_CONT
should have newlines inserted between them. Fix this.
- fix a section naming error - ".init.text" rather than ".text.init"
- preallocate DMA debug memory at core_initcall() time rather than
fs_initcall(), as we have some core drivers that need to use DMA
mapping - and that triggers a kernel warning from the DMA debug
code.
- fix XIP kernels after the ro_after_init changes made this data
permanently read-only"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: Fix XIP kernels
ARM: 8628/1: dma-mapping: preallocate DMA-debug hash tables in core_initcall
ARM: 8624/1: proc-v7m.S: fix init section name
ARM: fix backtrace
This enables the usb otg controller for the lcdk board.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
This adds the device tree node for the usb otg
controller present in the da850 family of SoC's.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Currently, suspend/resume support is only available on da850 platforms,
and the platform PM code has dependencies on da850 functions. However,
CONFIG_SUSPEND might be enabled even when da850 support is not, causing
build failure:
arch/arm/mach-davinci/built-in.o: In function `davinci_pm_init':
pm_domain.c:(.init.text+0x1fb8): undefined reference to `da8xx_get_mem_ctlr'
pm_domain.c:(.init.text+0x20b0): undefined reference to `da8xx_syscfg1_base'
Fix this by only building the PM core when da850 is enabled.
Reported-by: Sekhar Nori <nsekhar@ti.com>
Fixes: aa9aa1ec2d ("ARM: davinci: PM: rework init, remove platform device")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Child of mvpp2 ethernet do not have a reg property so the unit name
should not contain an address: remove them.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
As it was previously done for kirkwood and for aramda 370/XP, this adds
missing node labels to Armada 375 and SoC specific nodes to allow to
reference them more easily.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The gpio-key nodes do not have a reg property, so remove the address from
the unit name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The dsa node does not have a reg property, so remove the address from the
unit name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
l2-cache which is either an aurora-outer-cache or an aurora-system-cache
has a reg property so the unit name should contain an address.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The skeleton.dtsi file was removed in ARM64 for different reasons as
explained in commit ("3ebee5a2e141 arm64: dts: kill skeleton.dtsi").
These also applies to ARM and it will also allow to get rid of the
following DTC warnings in the future:
"Node /memory has a reg or ranges property, but no unit name"
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
PCIe has a ranges property, so the unit name should contain an address.
Take the opportunity to use the node label instead of the full name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
PCIe has a range property, so the unit name should contain an address.
Take the opportunity to use the node label instead of the full name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
MDIO has a reg property so the unit name should contain an address.
Take the opportunity to use the node label instead of the full name.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Use the node label when possible. As a result it flattens the device tree
and it makes more visible the IP blocks specific to each SoC variant.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
As it was previously done for kirkwood, this adds missing node labels to
Armada 370 and XP common and SoC specific nodes to allow to reference
them more easily.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The cpurst nodes are identical in armada-370.dtsi and armada-xp.dtsi
files, so move it in the common armada-370-xp.dtsi file.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
In the dts for the Marvell Armada XP Matrix board the pcie-controller was
located under the internal-regs node whereas it belongs to the soc node.
It means that, until this fix, the pcie could not work for this board
because it didn't match the definition of the pcie-controller node in the
dtsi file. If we had a look on the decompiled dtb file we saw two
different instances of the pcie-controller node: one with the all the
resource set but disabled and the other without any resource but enabled.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Fix a spelling mistake in arch/arm/boot/dts/kirkwood-topkick.dts.
The manufacturer's name is Univer*s*al Scientific Industrial...
Compare with footer of page here:
http://www.usish.com/english/products_topkick1281p2.php
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch removes the legacy support of ls-chl which is converted to the
device tree.
[gregory.clement@free-electrons.com: removal extracted from a wider patch]
Signed-off-by: Ashley Hughes <ashley.hughes@blueyonder.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch converts my orion5x ls-chl Linkstation device to device tree.
[gregory.clement@free-electrons.com: fix title, add back the commit log,
move the removal of the platform in an other patch]
Signed-off-by: Ashley Hughes <ashley.hughes@blueyonder.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The SMSC9112 ethernet controller is connected to chip select 2
on the EBI2 bus on the APQ8060 Dragonboard. We set this up by
activating EBI2, creating a chipselect entry as a subnode, and then
putting the ethernet controller in a subnode of the chipselect.
After the chipselect is configured, the SMSC device will be
instantiated.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This adds the external bus interface EBI2 to the MSM8660 device
tree, albeit with status = "disabled" so that devices actually
using EBI2 can turn it on if needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add pstore support for the nexus7. This was useful in debugging
a crash where the cpus were getting stuck with irqs off and
serial output wasn't reliably working.
Cc: Kees Cook <keescook@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Vinay Simha <vinaysimha@inforcecomputing.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add DSI and panel nodes to get graphics up and running
on the Nexus7.
This still depends on the panel driver being present
along with the rpmclk code.
Feedback would be greatly appreciated!
Cc: Archit Taneja <architt@codeaurora.org>
Cc: vinay simha <vinaysimha@inforcecomputing.com>
Cc: andy.gross@linaro.org
Cc: robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Adds the core gpu, and dsi nodes for the apq8064 needed
to get graphics working on the nexus7 and other devices.
These apply on top of Archit's patch set that enables HDMI for IFC6410
Feedback would be greatly appreciated!
Cc: Archit Taneja <architt@codeaurora.org>
Cc: vinay simha <vinaysimha@inforcecomputing.com>
Cc: andy.gross@linaro.org
Cc: robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add HDMI support on IFC6410. Populate the regulators required by HDMI-TX
and PHY. Establish the link between the MDP4 DTV encoder and HDMI. Create
a generic micro HDMI connector DT node. The msm drm driver doesn't parse
for HDMI connectors in DT, but it will do so later.
Cc: devicetree@vger.kernel.org
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
APQ8064 contains a MDP4 based display controller. It contains a HDMI, LVDS
and 2 DSI outputs.
Add display DT nodes for MDP4, HDMI TX and HDMI PHY. MDP4 based display
blocks have a flat device hierarchy.
Nodes for other outputs will be added later.
Cc: devicetree@vger.kernel.org
Tested-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This introduces the eMMC sdhci node and its pinctrl state
Signed-off-by: Bhushan Shah <bshah@kde.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add support for the Sierra Wireless MangOH Green board with the
Sierra Wireless WP8548 Module.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
In order to support the Sierra Wireless WP8548 module based on the
Qualcomm MDM9615 SoC, add a dtsi file.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Enable audio support for various Toradex devices as well as the GMI.
-----BEGIN PGP SIGNATURE-----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=zelz
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.10-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
ARM: tegra: Default configuration updates for v4.10-rc1
Enable audio support for various Toradex devices as well as the GMI.
* tag 'tegra-for-4.10-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable GMI driver in default configuration
ARM: tegra: Enable SGTL5000 audio
ARM: tegra: Update default configuration for v4.9-rc1
Signed-off-by: Olof Johansson <olof@lixom.net>
Adds support for GMI on Tegra20 and Tegra30 and enables the GPU on Nyan
Chromebooks. It also enables sound support on various Toradex devices.
-----BEGIN PGP SIGNATURE-----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=w7VH
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.10-rc1
Adds support for GMI on Tegra20 and Tegra30 and enables the GPU on Nyan
Chromebooks. It also enables sound support on various Toradex devices.
* tag 'tegra-for-4.10-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: apalis-tk1: Drop leading 0 from unit-address
ARM: tegra: apalis/colibri t30: Integrate audio
ARM: tegra: nyan: Enable GPU node and related supply
ARM: tegra: Add Tegra30 GMI support
ARM: tegra: Add Tegra20 GMI support
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix invalid GIC interrupt flags - type IRQ_TYPE_NONE is not allowed for GIC
interrupts. Although this was working but with error messages like:
genirq: Setting trigger mode 0 for irq 16 failed
Use level high interrupt instead of type none. The choice of level high was
rather an arbitrary decision hoping it will work on each platform. Tests shown
no issues so far.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYLvYLAAoJEME3ZuaGi4PX7FYP/RUWX+IGk5xZg9xsi/VBN5wg
IDOseVLPTiz5VxgU1CvCMAxAbdshlPrrn6jgfmj0IRmF5g+9RfjpS6y3X+YIELUA
hD7altzN75JzY9rV4BhnHeFaRBK53gTeno+4O2hDarew6dRN4A2UtMTFpgGav9S/
T3vgIrsAXq7vrtnT9dePja0WISzl7l0JgzByTKEtu3egoy6wl20hrslGSJI+sWmt
Mu969g50RJsbrinzhv2qAYqN9AYuDSHUo8KVUJ2mg0ow9zkeJ/AeHlB4zuUK8dUf
dPW9tVtQDrcl6sA4wqG4Tno2JjJHqnJNBvE3KOnxqWd/ed7Mz7Pddrc4AaqB5o5l
GDZxzAx2xb+rX+dWwURVXAtS54RUnD8e1S7Jp8X2+eCL8OUKXvfO6p/XA45/8V/S
9VJNP/gUL594Zyyj5LuAhqyOfbtcrW2VaZntts68NVjhtYfRcHF8UrxGtj6RxZnH
mOZC5HNBNIxrpzI+YfSiTCk0ec1CRFtbqC0sMIJoC2DJ+IGint2UPz8VOFMJrZlw
0zVXCr0NKHCgvJqPIV24udyzPq79REfdsElZQYyl6GDYGXAqTJLR+OP6/Sc/MNv5
c1uObjQLd/Yi7e9BhqHF60t9s+y3whmqnvOibTEsnRX145VaPBnfwomc1XU9PVIn
YdK2ml1FgIGdZNZ5dPxy
=lyeE
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-gic-flags-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt
Topic branch with DT changes for v4.10.
Fix invalid GIC interrupt flags - type IRQ_TYPE_NONE is not allowed for GIC
interrupts. Although this was working but with error messages like:
genirq: Setting trigger mode 0 for irq 16 failed
Use level high interrupt instead of type none. The choice of level high was
rather an arbitrary decision hoping it will work on each platform. Tests shown
no issues so far.
* tag 'samsung-dt-gic-flags-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5440
ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5260
ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos5
ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos4
ARM: dts: exynos: Use human-friendly symbols for interrupt properties in exynos3250
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5440
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5260
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5410/exynos542x
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5250
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos5
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos3250
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4x12
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4210
ARM: dts: exynos: Fix invalid GIC interrupt flags in exynos4
Signed-off-by: Olof Johansson <olof@lixom.net>
Clean-up on thegpio driver for old SoCs(non DT)
-----BEGIN PGP SIGNATURE-----
iGoEABECACoFAlguI2sjHGdyZWdvcnkuY2xlbWVudEBmcmVlLWVsZWN0cm9ucy5j
b20ACgkQCwYYjhRyO9UpBQCfXuXP07OSFdUosB4EmN7dsXpwof0An0WBl7vez4zP
MyLYA9BpkD8FwfUs
=Aa7L
-----END PGP SIGNATURE-----
Merge tag 'mvebu-drivers-4.10-1' of git://git.infradead.org/linux-mvebu into next/soc
mvebu drivers for 4.10 (part 1)
Clean-up on thegpio driver for old SoCs(non DT)
* tag 'mvebu-drivers-4.10-1' of git://git.infradead.org/linux-mvebu:
ARM/orion/gpio: Replace three seq_printf() calls by seq_puts() in orion_gpio_dbg_show()
Signed-off-by: Olof Johansson <olof@lixom.net>
* Basic support for r8a7745 SoC
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tBnV
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Second Round of Renesas ARM Based SoC Updates for v4.10
* Basic support for r8a7745 SoC
* tag 'renesas-soc2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: document SK-RZG1E board
ARM: shmobile: r8a7745: basic SoC support
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable tsc2004 touchscreen as a loadable module
- Enable REGULATOR_GPIO, dra71-evm needs this for MMC voltage
- Enable LP873x PMICs for dra71x-evm
- Run make savedefconfig to save some space and make it
easier to generate minimal patches against it
-----BEGIN PGP SIGNATURE-----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=h0e5
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Defconfig changes for omaps for v4.10 merge window:
- Enable tsc2004 touchscreen as a loadable module
- Enable REGULATOR_GPIO, dra71-evm needs this for MMC voltage
- Enable LP873x PMICs for dra71x-evm
- Run make savedefconfig to save some space and make it
easier to generate minimal patches against it
* tag 'omap-for-v4.10/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Run make savedefconfig to save some space
ARM: omap2plus_defconfig: Enable LP873X support
ARM: omap2plus_defconfig: Enable REGULATOR_GPIO
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004
Signed-off-by: Olof Johansson <olof@lixom.net>
We've dropped the last legacy boot board-*.c files for mach-omap2
for v4.9 so now we can start removing the unused platform_data.
All of the below has been unused since v4.9 merge window:
- Drop legacy pmic init code
- Apply seq_puts() fixes for legacy mux code, then drop it
- Drop legacy serial init
- Drop legacy i2c init
- Drop legacy PM init
- Drop legacy twl4030 platform init
- Drop legacy USB host init
- Drop legacy muxing for tusb6010, n8x0 is still using it's
platform init via pdata-quirks.c
- Drop legacy musb init
- Drop hwmod related legacy mux code
- Drop legacy hwmod data for omap3
- Drop legacy smsc911x and smc91x init
- Drop legacy board flash init
- Drop legacy ads7846 init
- Drop legacy sdram timings
-----BEGIN PGP SIGNATURE-----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=GbYF
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Legacy platform_data removal for omaps for v4.10 merge window.
We've dropped the last legacy boot board-*.c files for mach-omap2
for v4.9 so now we can start removing the unused platform_data.
All of the below has been unused since v4.9 merge window:
- Drop legacy pmic init code
- Apply seq_puts() fixes for legacy mux code, then drop it
- Drop legacy serial init
- Drop legacy i2c init
- Drop legacy PM init
- Drop legacy twl4030 platform init
- Drop legacy USB host init
- Drop legacy muxing for tusb6010, n8x0 is still using it's
platform init via pdata-quirks.c
- Drop legacy musb init
- Drop hwmod related legacy mux code
- Drop legacy hwmod data for omap3
- Drop legacy smsc911x and smc91x init
- Drop legacy board flash init
- Drop legacy ads7846 init
- Drop legacy sdram timings
* tag 'omap-for-v4.10/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: OMAP2+: Drop legacy sdram timings
ARM: OMAP2+: Drop legacy ads7846 init
ARM: OMAP2+: Remove legacy board-flash.c
ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support
ARM: OMAP2+: Remove legacy data from hwmod for omap3
ARM: OMAP2+: Remove legacy mux code
ARM: OMAP2+: Remove legacy hwmod mux code
ARM: OMAP2+: Remove legacy usb-musb.c platform init code
ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c
ARM: OMAP2+: Remove legacy usb-host.c platform init code
ARM: OMAP2+: Remove legacy twl4030 platform init code
ARM: OMAP2+: Remove legacy PM init
ARM: OMAP2+: Remove legacy i2c.c platform init code
ARM: OMAP2+: Remove legacy serial.c
ARM: OMAP2+: mux: Use seq_putc() in omap_mux_dbg_signal_show()
ARM: OMAP2+: mux: Replace three seq_printf() calls by seq_puts()
ARM: OMAP: kill omap_pmic_init
ARM: OMAP2: kill omap2_pmic_init
ARM: OMAP3: kill omap3_pmic_init
ARM: OMAP3: kill omap3_pmic_get_config and twl_{get,set}_voltage
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- A series of patches to configure tps65217 PMIC interrupts for
power button, charger and usb and use them on am335x
- Configure EEPROM, LEDs and USR1 button for omap5 boards
- Add tscadc DMA properites for am33xx and am4372
- Configure baltos-ir5221 both musb channels to host mode
- Configure internal and external RTC clocks for am335x boards
- Don't reset gpio3 block on baltos
- Remove pinmux for dra72-evm for erratum i869, fix the regulators
and seprate out tps65917 support
- Add dra718-evm support
- Add minimal droid 4 xt894 support
-----BEGIN PGP SIGNATURE-----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=GYpd
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.10 merge window:
- A series of patches to configure tps65217 PMIC interrupts for
power button, charger and usb and use them on am335x
- Configure EEPROM, LEDs and USR1 button for omap5 boards
- Add tscadc DMA properites for am33xx and am4372
- Configure baltos-ir5221 both musb channels to host mode
- Configure internal and external RTC clocks for am335x boards
- Don't reset gpio3 block on baltos
- Remove pinmux for dra72-evm for erratum i869, fix the regulators
and seprate out tps65917 support
- Add dra718-evm support
- Add minimal droid 4 xt894 support
* tag 'omap-for-v4.10/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (22 commits)
ARM: dts: Add minimal support for motorola droid 4 xt894
ARM: dts: Add support for dra718-evm
ARM: dts: dra72: Add separate dtsi for tps65917
ARM: dts: dra72-evm: Fix modelling of regulators
ARM: dts: dra72-evm: Remove pinmux configurations for erratum i869
ARM: dts: am335x-baltos: don't reset gpio3 block
ARM: dts: AM335X-evmsk: Add the internal and external clock nodes for rtc
ARM: dts: AM335X-evm: Add the internal and external clock nodes for rtc
ARM: dts: AM335X-bone-common: Add the internal and external clock nodes for rtc
ARM: dts: am335x-baltos-ir5221: use both musb channels in host mode
ARM: dts: am4372: add DMA properties for tscadc
ARM: dts: am33xx: add DMA properties for tscadc
ARM: dts: omap5 uevm: add USR1 button
ARM: dts: omap5 uevm: add LEDs
ARM: dts: omap5 uevm: add EEPROM
ARM: dts: am335x: Add the power button interrupt
ARM: dts: am335x: Add the charger interrupt
dt-bindings: mfd: Provide human readable defines for TPS65217 interrupts
ARM: dts: am335x: Support the PMIC interrupt
ARM: dts: tps65217: Add the power button device
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add hwmod interconnect target wrapper module data for crypto
accelerators for am3xxx, am43xx and dra7
- Add support for dra71x family of SoCs
- PM fixes for omap4/5 needed for omap5 cpuidle
-----BEGIN PGP SIGNATURE-----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=hUTI
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC changes for omaps for v4.10 merge window:
- Add hwmod interconnect target wrapper module data for crypto
accelerators for am3xxx, am43xx and dra7
- Add support for dra71x family of SoCs
- PM fixes for omap4/5 needed for omap5 cpuidle
* tag 'omap-for-v4.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: DRA7: hwmod: Do not register RTC on DRA71
ARM: OMAP2+: board-generic: add support for DRA71x family
ARM: AMx3xx: hwmod: Add data for RNG
ARM: AM43xx: hwmod: Add data for DES
ARM: OMAP: DRA7xx: Make L4SEC clock domain SWSUP only
ARM: DRA7: hwmod: Add data for RNG IP
ARM: DRA7: hwmod: Add data for SHA IP
ARM: DRA7: hwmod: Add data for AES IP
ARM: DRA7: hwmod: Add data for DES IP
ARM: OMAP5: Add basic cpuidle MPU CSWR support
ARM: OMAP4+: Fix bad fallthrough for cpuidle
ARM: OMAP5: Fix mpuss_early_init
ARM: OMAP5: Fix build for PM code
Signed-off-by: Olof Johansson <olof@lixom.net>
- Fix mismatched interrupt numbers for tps65217, these are not yet
used
- Remove unused omapdss_early_init_of()
- Use seq_putc() for pm-debug.c
-----BEGIN PGP SIGNATURE-----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=tMf4
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.10/fixes-not-urgent-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
Non-urgent fixes for omaps for v4.10 merge window:
- Fix mismatched interrupt numbers for tps65217, these are not yet
used
- Remove unused omapdss_early_init_of()
- Use seq_putc() for pm-debug.c
* tag 'omap-for-v4.10/fixes-not-urgent-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: pm-debug: Use seq_putc() in two functions
ARM: OMAP2+: Remove the omapdss_early_init_of() function
mfd: tps65217: Fix mismatched interrupt number
Signed-off-by: Olof Johansson <olof@lixom.net>
Two patches to enable the dumb VGA bridges in the multi_v7 and sunxi
defconfig.
-----BEGIN PGP SIGNATURE-----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=P4mc
-----END PGP SIGNATURE-----
Merge tag 'sunxi-defconfig-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig
Allwinner defconfig changes for 4.10
Two patches to enable the dumb VGA bridges in the multi_v7 and sunxi
defconfig.
* tag 'sunxi-defconfig-for-4.10' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
ARM: multi_v7: enable VGA bridge
ARM: sunxi: Enable VGA bridge
Signed-off-by: Olof Johansson <olof@lixom.net>
- remove obsolete STiH41[56] platform support
- add Oxford Semiconductor OX820 support
- add reset index include files for OX810SE and OX820
- make drivers with boolean Kconfig options explicitly
non-modular
- allow shared pulsed resets via reset_control_reset, which
in this case means that the reset must have been triggered
once, but possibly earlier, after the function returns, and
is never triggered again for the lifetime of the reset
control
-----BEGIN PGP SIGNATURE-----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=e7kp
-----END PGP SIGNATURE-----
Merge tag 'reset-for-4.10' of git://git.pengutronix.de/git/pza/linux into next/drivers
Reset controller changes for v4.10
- remove obsolete STiH41[56] platform support
- add Oxford Semiconductor OX820 support
- add reset index include files for OX810SE and OX820
- make drivers with boolean Kconfig options explicitly
non-modular
- allow shared pulsed resets via reset_control_reset, which
in this case means that the reset must have been triggered
once, but possibly earlier, after the function returns, and
is never triggered again for the lifetime of the reset
control
* tag 'reset-for-4.10' of git://git.pengutronix.de/git/pza/linux:
reset: allow using reset_control_reset with shared reset
reset: lpc18xx: make it explicitly non-modular
reset: zynq: make it explicitly non-modular
reset: sunxi: make it explicitly non-modular
reset: socfpga: make it explicitly non-modular
reset: berlin: make it explicitly non-modular
dt-bindings: reset: oxnas: Update for OX820
dt-bindings: reset: oxnas: Add include file with reset indexes
reset: oxnas: Add OX820 support
reset: sti: softreset: Remove obsolete platforms from dt binding doc.
reset: sti: Remove STiH415/6 reset support
Signed-off-by: Olof Johansson <olof@lixom.net>
Recently added audio block of Exynos5410 missed global fixup of GIC
interrupt flags. Interrupt of type IRQ_TYPE_NONE is not allowed for GIC
interrupts so use level high.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
