The 1.0 version of that controller has a bug that status bit
of LPC IRQ sometimes doesn't get set correctly.
So we can always blame LPC IRQ when spurious interrupt happens
at the parent interrupt line which LPC IRQ supposed to route
to.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Co-developed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This controller appeared on Loongson family of chips as the primary
package interrupt source.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Co-developed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since the au1xxx-ide IDE host driver is no longer needed its documentation
can be removed.
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Since the only user of this header (au1xxx-ide IDE host driver) is
now gone it can also be removed.
Acked-by: Paul Burton <paulburton@kernel.org>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Commit 54ff4a1d17 ("MIPS: Alchemy: pata_platform for DB1200")
from year 2014 converted the only user of au1xxx-ide IDE host
driver (MIPS Alchemy DB1200 platform) to use pata_platform
libata host driver instead. This patch removes dead au1xxx-ide
driver code.
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Enable DMI scanning on the MIPS architecture, this setups DMI identifiers
(dmi_system_id) for printing it out on task dumps and prepares DIMM entry
information (dmi_memdev_info) from the SMBIOS table. With this patch, the
driver can easily match various of mainboards.
In the SMBIOS reference specification, the table anchor string "_SM_" is
present in the address range 0xF0000 to 0xFFFFF on a 16-byte boundary,
but there exists a special case for Loongson platform, when call function
dmi_early_remap, it should specify the start address to 0xFFFE000 due to
it is reserved for SMBIOS and can be normally access in the BIOS.
This patch works fine on the Loongson 3A3000 platform which belongs to
MIPS architecture and has no influence on the other architectures such
as x86 and ARM.
Additionally, in order to avoid the unknown risks on the mips platform
which is not MACH_LOONGSON64, the DMI config is better to depend on
MACH_LOONGSON64. If other mips platform also needs this DMI feature in
the future, the "depends on" condition can be modified.
Co-developed-by: Yinglu Yang <yangyinglu@loongson.cn>
Signed-off-by: Yinglu Yang <yangyinglu@loongson.cn>
[jiaxun.yang@flygoat.com: Refine definitions and Kconfig]
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use SMBIOS_ENTRY_POINT_SCAN_START instead of 0xF0000, because other
archtecture maybe use a special start address such as 0xFFFE000 for
Loongson platform.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
mt7621 SoC has its own 'ralink_soc_info' structure with some
information about the soc itself. Pcie controller and pcie phy
drivers for this soc which are still in staging git tree make uses
of 'soc_device_attribute' looking for revision 'E2' in order to
know if reset lines are or not inverted. This way of doing things
seems to be necessary in order to make things clean and properly.
Hence, introduce this 'soc_device' to be able to properly use those
attributes in drivers. Also set 'data' pointer points to the struct
'ralink_soc_info' to be able to export also current soc information
using this mechanism.
Cc: Paul Burton <paul.burton@mips.com>
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: john@phrozen.org
Cc: NeilBrown <neil@brown.name>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
a) configure for supporting modules
Not all drivers need to be compiled into the kernel.
Support building and loading of kernel modules.
b) compile leds-gpio driver into the kernel and configure for LED triggers
DTS has been augmented to add some gpio-leds. We need the leds-gpio driver
and enable the triggers.
c) configure CONFIG_REGULATOR_ACT8865 for PMU
The PMU on the CI20 board is an ACT8600 using the ACT8865 driver.
Since it is not compiled, the PMU and the CI20 board is running in
power-on reset state of the PMU.
d) compile gpio-ir driver
The CI20 board has a gpio based IR receiver.
e) configure for CONFIG_KEYBOARD_GPIO=m
The SW1 button is hooked up to send input events.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
a) add DT node for SW1 as Enter button
The SW1 button can be used as a simple one-button keyboard
and is connected to PD17.
Note: SW1 has a second meaning to change the boot sequence
when pressed while powering on.
b) give eth0_power a defined voltage.
This is a 3.3V power switch (DVNET3.3V).
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The infrared sensor on the CI20 board is connected to a GPIO and can
be operated by using the gpio-ir-recv driver. Add a DT node for the
sensor to allow that driver to be used.
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix the following checkpatch error:
ERROR: do not initialise statics to 0
#125: FILE: loongson64/numa.c:125:
+ static unsigned long num_physpages = 0;
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are some common header files which are referenced locally
with #includenext method, includenext is tricky method and only
used on mips platform.
This patech removes includenext method, replace it with defailed
pathname prefix for header files.
This patch passes to compile on all mips platform with defconfig,
and is verified on my loongson64 box.
Changes:
--------
v2:
- Fix compiling issue on malta platform
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: bibo mao <maobibo@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Some userland application/program runtime/dynamic loaded need to
know about the current ISA level to use the best runtime.
While kernel doesn't provides this info.
ELF_PLATFORM only provides some info about the CPU, with very few info,
for example, the value is "mips" for both 24Kc and P6600.
Currently ELF_BASE_PLATFORM is not used by MIPS (only by powerpc).
So we cant set its value as:
mips2, mips3, mips4, mips5,
mips32, mips32r2, mips32r6
mips64, mips64r2, mips64r6
Then in userland, we can get it by:
getauxval(AT_BASE_PLATFORM)
The only problem is that it seems has different defination than ppc:
on ppc, it is the mircoarchitecture
while now we use it as ISA level on MIPS.
Signed-off-by: YunQiang Su <syq@debian.org>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Zephyr secondary cache is 256KB, 128B lines. 32B sectors. A secondary cache
line can contain two instruction cache lines (64B), or four data cache
lines (32B). Hardware prefetch Cache detects stream access, and prefetches
ahead of processor access. Add support to invalidate BMIPS5000 cpu zephyr
secondary cache module (ZSCM) on DMA from device so that data returned is
coherent during DMA read operations.
Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Recently all usages of setup_irq() was replaced by request_irq().
request_irq() does a few sanity checks that were not done in
setup_irq(), if they fail irq registration will fail. One of the check
is to ensure that non-NULL dev_id is passed in the case of shared irq.
This caused malta on qemu to hang.
Fix it by passing handler as dev_id to all request_irq()'s that are
shared. For sni, instead of passing non-NULL dev_id, remove shared irq
flags.
Fixes: ac8fd122e0 ("MIPS: Replace setup_irq() by request_irq()")
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Interrupts should not be specified by interrupt line but by
gpio parent and reference.
Fixes: 73f2b94047 ("MIPS: CI20: DTS: Add I2C nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is a ACT8600 on the CI20 board and the bindings of the
ACT8865 driver have changed without updating the CI20 device
tree. Therefore the PMU can not be probed successfully and
is running in power-on reset state.
Fix DT to match the latest act8865-regulator bindings.
Fixes: 73f2b94047 ("MIPS: CI20: DTS: Add I2C nodes")
Cc: stable@vger.kernel.org
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
request_irq() is preferred over setup_irq(). Invocations of setup_irq()
occur after memory allocators are ready.
Per tglx[1], setup_irq() existed in olden days when allocators were not
ready by the time early interrupts were initialized.
Hence replace setup_irq() by request_irq().
remove_irq() has been replaced by free_irq() as well.
There were build error's during previous version, couple of which was
reported by kbuild test robot <lkp@intel.com> of which one was reported
by Thomas Bogendoerfer <tsbogend@alpha.franken.de> as well. There were a
few more issues including build errors, those also have been fixed.
[1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos
Signed-off-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is a potential NULL pointer dereference in case kzalloc()
fails and returns NULL.
Fix this by adding a NULL check on *cd*
This bug was detected with the help of Coccinelle.
Fixes: 64b139f97c ("MIPS: OCTEON: irq: add CIB and other fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix wording in NUMA help text.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Default printk log level is KERN_WARNING. This makes automatic log
parsing problematic, since we get false positive alarms on not critical
information.
Set all not critical cache related information to KERN_INFO, the same level
as used on most kernel drivers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There is no need to have the 'struct device_node *node' variable static
since new value always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The CONFIG_MIPS_CMDLINE_DTB_EXTEND option is used so that the kernel
arguments provided in the 'bootargs' property in devicetree are extended
with the kernel arguments provided by the bootloader.
The code was broken, as it didn't actually take any of the kernel
arguments provided in devicetree when that option was set.
Fixes: 7784cac697 ("MIPS: cmdline: Clean up boot_command_line initialization")
Cc: stable@vger.kernel.org
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
My time with MIPS the company has reached its end, and so at best I'll
have little time spend on maintaining arch/mips/.
Ralf last authored a patch over 2 years ago, the last time he committed
one is even further back & activity was sporadic for a while before
that. The reality is that he isn't active.
Having a new maintainer with time to do things properly will be
beneficial all round. Thomas Bogendoerfer has been involved in MIPS
development for a long time & has offered to step up as maintainer, so
add Thomas and remove myself & Ralf from the MIPS entry.
Ralf already has an entry in CREDITS to honor his contributions, so this
just adds one for me.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Enable some options for machine type, framebuffer, serial controller and
ATA interfaces.
This allows a jazz_defconfig build to work on the emulated MIPS Magnum
machine provided by qemu-system-mips64el.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Remove some redundant assignments, that have no effect on
'make jazz_defconfig':
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_CRYPTO_HMAC=y
Also drop the settings relating to crypto, wireless, advanced
networking etc. The Kconfig defaults for these options are fine.
This reduces the size of vmlinux so it can be launched by
"NetBSD/arc Bootstrap, Revision 1.1", which is conveniently available
on NetBSD/arc 5.1 ISO images.
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
This patch resolves these compiler errors and warnings --
CC drivers/video/fbdev/g364fb.o
drivers/video/fbdev/g364fb.c: In function 'g364fb_cursor':
drivers/video/fbdev/g364fb.c:137:9: error: 'x' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:137:9: note: each undeclared identifier is reported only once for each function it appears in
drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontwidth' [-Werror=implicit-function-declaration]
drivers/video/fbdev/g364fb.c:137:23: error: 'p' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:137:38: error: 'y' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:137:7: error: implicit declaration of function 'fontheight' [-Werror=implicit-function-declaration]
drivers/video/fbdev/g364fb.c: In function 'g364fb_init':
drivers/video/fbdev/g364fb.c:233:24: error: 'fbvar' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:234:24: error: 'xres' undeclared (first use in this function)
drivers/video/fbdev/g364fb.c:201:14: warning: unused variable 'j' [-Wunused-variable]
drivers/video/fbdev/g364fb.c:197:25: warning: unused variable 'pal_ptr' [-Wunused-variable]
The MIPS Magnum framebuffer console now works when tested in QEMU.
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
The devicetree ABI was broken on purpose by commit 6d532143c9
("watchdog: jz4740: Use regmap provided by TCU driver"), and
commit 1d9c307454 ("watchdog: jz4740: Use WDT clock provided
by TCU driver"). The commit message of the latter explains why the ABI
was broken.
However, the current devicetree files were not updated to the new ABI
described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt,
so the watchdog driver would not probe.
Fix this problem by updating the watchdog nodes to comply with the new
ABI.
Fixes: 6d532143c9 ("watchdog: jz4740: Use regmap provided by TCU driver")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Zhou Yanjie <zhouyanjie@wanyeetech.com>
Cc: od@zcrc.me
Cc: linux-mips@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # v5.5+
The devicetree ABI was broken on purpose by commit 6d532143c9
("watchdog: jz4740: Use regmap provided by TCU driver"), and
commit 1d9c307454 ("watchdog: jz4740: Use WDT clock provided
by TCU driver"). The commit message of the latter explains why the ABI
was broken.
However, the current devicetree files were not updated to the new ABI
described in Documentation/devicetree/bindings/timer/ingenic,tcu.txt,
so the watchdog driver would not probe.
Fix this problem by updating the clock of watchdog node from
"&cgu X1000_CLK_RTCLK" to "&tcu TCU_CLK_WDT" to comply with the new
ABI.
Fixes: 7a16ccd300 ("[v8,1/4] MIPS: Ingenic: Add Ingenic X1000 support.").
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: paul@crapouillou.net
Cc: robh+dt@kernel.org
Cc: mark.rutland@arm.com
Cc: ralf@linux-mips.org
Cc: sernia.zhou@foxmail.com
Cc: zhenwenjin@gmail.com
Cc: dongsheng.qiu@ingenic.com
CONFIG_MTD_NAND_IDS is gone and not needed (part of CONFIG_MTD_NAND)
since commit f16bd7ca04 ("mtd: nand: Kill the MTD_NAND_IDS Kconfig
option").
CONFIG_IOSCHED_DEADLINE, CONFIG_IOSCHED_CFQ and CONFIG_DEFAULT_NOOP are
gone since commit f382fb0bce ("block: remove legacy IO schedulers").
The IOSCHED_DEADLINE was replaced by MQ_IOSCHED_DEADLINE and it will be
now enabled by default (along with MQ_IOSCHED_KYBER).
The BFQ_GROUP_IOSCHED is the only multiqueue scheduler which comes with
group scheduling so select it in configs previously choosing
CFQ_GROUP_IOSCHED.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
The Ralink platform code is not a clock provider, and just needs to call
of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: linux-mips@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The Pistachio platform code is not a clock provider, and just needs to
call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: James Hartley <james.hartley@sondrel.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The Microchip PIC32MZDA platform code is not a clock provider, and just
needs to call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The Ingenic JZ4740 platform code is not a clock provider, and just needs
to call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The generic MIPS platform code is not a clock provider, and just needs
to call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The Broadcom BMIPS platform code is not a clock provider, and just needs
to call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
The Atheros 7/9xxx platform code is not a clock provider, and just needs
to call of_clk_init().
Hence it can include <linux/of_clk.h> instead of <linux/clk-provider.h>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: James Hartley <james.hartley@sondrel.com>
Cc: John Crispin <john@phrozen.org>
Cc: linux-mips@vger.kernel.org
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-clk@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Clang does not support this option and errors out:
clang-11: error: unknown argument: '-mexplicit-relocs'
Clang does not appear to need this flag like GCC does because the jalr
check that was added in commit 976c23af3e ("mips: vdso: add build
time check that no 'jalr t9' calls left") passes just fine with
$ make ARCH=mips CC=clang CROSS_COMPILE=mipsel-linux-gnu- malta_defconfig arch/mips/vdso/
even before commit d3f703c435 ("mips: vdso: fix 'jalr t9' crash in
vdso code").
-mrelax-pic-calls has been supported since clang 9, which is the
earliest version that could build a working MIPS kernel, and it is the
default for clang so just leave it be.
Fixes: d3f703c435 ("mips: vdso: fix 'jalr t9' crash in vdso code")
Link: https://github.com/ClangBuiltLinux/linux/issues/890
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: clang-built-linux@googlegroups.com
I know this is late; I've been travelling and, well, I've been
distracted.
This is just a few bug fixes and adding i2c support to the IPMB driver,
which is something I wanted from the beginning for it. It would be
nice for the people doing IPMB to get this in.
-corey
-----BEGIN PGP SIGNATURE-----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=y+e9
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi
Pull IPMI update from Corey Minyard:
"Minor bug fixes for IPMI
I know this is late; I've been travelling and, well, I've been
distracted.
This is just a few bug fixes and adding i2c support to the IPMB
driver, which is something I wanted from the beginning for it"
* tag 'for-linus-5.6-1' of https://github.com/cminyard/linux-ipmi:
drivers: ipmi: fix off-by-one bounds check that leads to a out-of-bounds write
ipmi:ssif: Handle a possible NULL pointer reference
drivers: ipmi: Modify max length of IPMB packet
drivers: ipmi: Support raw i2c packet in IPMB
KVM documentation to rst format, which was very welcome.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeRYe2AAoJEL/70l94x66DSdsH/31rMoISGbPReQNKDZtondwr
UNLYHBLau46OR5JiLaKDqRODi12CXwrB6KZyRtQg+PeU/aCaFqW09kDOtMdV4AMl
2bEl4VfUuClsGXBQL5WWsb+adaWxHBtRFPcaT0xMAE+JXxAvt2o7rstOydM4yB9f
vM9TqEP+oVGyqx0FsuCND+zu/qZqNOOqJ1eZCrzqZKwFS8lrjsYtBG4K8rfnvXnI
uGxFnbmZuJKpXpRgCebDdB98m0KEWfAs0S8aOO4NRfmymUBcjMeIeqQz0Mnt17xJ
Fz0KktwdGL28qJ+fnE51i/IBqCoBJL2BmIesSiGKVr1alpHA1ngKvUmcbtHkAXw=
=To92
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bugfixes and improvements to selftests.
On top of this, Mauro converted the KVM documentation to rst format,
which was very welcome"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (44 commits)
docs: virt: guest-halt-polling.txt convert to ReST
docs: kvm: review-checklist.txt: rename to ReST
docs: kvm: Convert timekeeping.txt to ReST format
docs: kvm: Convert s390-diag.txt to ReST format
docs: kvm: Convert ppc-pv.txt to ReST format
docs: kvm: Convert nested-vmx.txt to ReST format
docs: kvm: Convert mmu.txt to ReST format
docs: kvm: Convert locking.txt to ReST format
docs: kvm: Convert hypercalls.txt to ReST format
docs: kvm: arm/psci.txt: convert to ReST
docs: kvm: convert arm/hyp-abi.txt to ReST
docs: kvm: Convert api.txt to ReST format
docs: kvm: convert devices/xive.txt to ReST
docs: kvm: convert devices/xics.txt to ReST
docs: kvm: convert devices/vm.txt to ReST
docs: kvm: convert devices/vfio.txt to ReST
docs: kvm: convert devices/vcpu.txt to ReST
docs: kvm: convert devices/s390_flic.txt to ReST
docs: kvm: convert devices/mpic.txt to ReST
docs: kvm: convert devices/arm-vgit.txt to ReST
...
Robert Richter.
Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK
unearthed issues with the lifespan of memory allocated by the EDAC
memory controller descriptor due to misdesigned memory freeing, done
partially by the EDAC core *and* the driver core, which is problematic
to say the least.
These two are minimal fixes to take care of stable - a proper rework is
following which cleans up that mess properly.
-----BEGIN PGP SIGNATURE-----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=UTcs
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
"Two fixes for use-after-free and memory leaking in the EDAC core, by
Robert Richter.
Debug options like DEBUG_TEST_DRIVER_REMOVE, KASAN and DEBUG_KMEMLEAK
unearthed issues with the lifespan of memory allocated by the EDAC
memory controller descriptor due to misdesigned memory freeing, done
partially by the EDAC core *and* the driver core, which is problematic
to say the least.
These two are minimal fixes to take care of stable - a proper rework
is following which cleans up that mess properly"
* tag 'edac_urgent_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/sysfs: Remove csrow objects on errors
EDAC/mc: Fix use-after-free and memleaks during device removal
-----BEGIN PGP SIGNATURE-----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=jy10
-----END PGP SIGNATURE-----
Merge tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Not a lot here, which is great, basically just three small bcache
fixes from Coly, and four NVMe fixes via Keith"
* tag 'block-5.6-2020-02-16' of git://git.kernel.dk/linux-block:
nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_info
nvme/pci: move cqe check after device shutdown
nvme: prevent warning triggered by nvme_stop_keep_alive
nvme/tcp: fix bug on double requeue when send fails
bcache: remove macro nr_to_fifo_front()
bcache: Revert "bcache: shrink btree node cache after bch_btree_check()"
bcache: ignore pending signals when creating gc and allocator thread
-----BEGIN PGP SIGNATURE-----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=i1Ct
-----END PGP SIGNATURE-----
Merge tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Two races fixed, memory leak fix, sysfs directory fixup and two new
log messages:
- two fixed race conditions: extent map merging and truncate vs
fiemap
- create the right sysfs directory with device information and move
the individual device dirs under it
- print messages when the tree-log is replayed at mount time or
cannot be replayed on remount"
* tag 'for-5.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: sysfs, move device id directories to UUID/devinfo
btrfs: sysfs, add UUID/devinfo kobject
Btrfs: fix race between shrinking truncate and fiemap
btrfs: log message when rw remount is attempted with unclean tree-log
btrfs: print message when tree-log replay starts
Btrfs: fix race between using extent maps and merging them
btrfs: ref-verify: fix memory leaks
-----BEGIN PGP SIGNATURE-----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=IQBE
-----END PGP SIGNATURE-----
Merge tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Four small CIFS/SMB3 fixes. One (the EA overflow fix) for stable"
* tag '5.6-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: make sure we do not overflow the max EA buffer size
cifs: enable change notification for SMB2.1 dialect
cifs: Fix mode output in debugging statements
cifs: fix mount option display for sec=krb5i
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl5IrGgACgkQ8vlZVpUN
gaMi2Qf+NuXFQ6xpxjw90ZmkOXbsqbFVAIx3yjzW5WKIVyHrhG19P8NuNaCbUajP
WEUzrY/LMmcODd46zKcCR61jOygKCJ5NXyF8qTEFltiMuqugvwmTv49ofRxX+Zlf
YkavQGo+cPs5p1xzo+bKqhA29zhc4PApd3bGpjgUqDlfQxBmm2vNpkbXKj/Bk6CL
k9c1EodygpTO45Kb3Y/JvPcbTLOOu0hPnrCemtb1Vc9tm0j6I+g5RtQofUag+1BX
FOR5Z2EUwByb7F+TTxO1Jse0oFjcxH9J/VqeKi2Fbzucdq3NrRypiFj0XPFBRPFn
g7ONbaoIGiK+02pCNFuwbY0WmLQVfg==
=T3j1
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes (all stable fodder)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: improve explanation of a mount failure caused by a misconfigured kernel
jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer
jbd2: move the clearing of b_modified flag to the journal_unmap_buffer()
ext4: add cond_resched() to ext4_protect_reserved_inode
ext4: fix checksum errors with indexed dirs
ext4: fix support for inode sizes > 1024 bytes
ext4: simplify checking quota limits in ext4_statfs()
ext4: don't assume that mmp_nodename/bdevname have NUL
Pull input updates from Dmitry Torokhov:
- a few drivers have been updated to use flexible-array syntax instead
of GCC extension
- ili210x touchscreen driver now supports the 2120 protocol flavor
- a couple more of Synaptics devices have been switched over to RMI4
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: cyapa - replace zero-length array with flexible-array member
Input: tca6416-keypad - replace zero-length array with flexible-array member
Input: gpio_keys_polled - replace zero-length array with flexible-array member
Input: synaptics - remove the LEN0049 dmi id from topbuttonpad list
Input: synaptics - enable SMBus on ThinkPad L470
Input: synaptics - switch T470s to RMI4 by default
Input: gpio_keys - replace zero-length array with flexible-array member
Input: goldfish_events - replace zero-length array with flexible-array member
Input: psmouse - switch to using i2c_new_scanned_device()
Input: ili210x - add ili2120 support
Input: ili210x - fix return value of is_visible function
