The device tree version for the babbage board (imx51-babbage.dtb) has a more
complete support than the board file version, so remove the board file source
code.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
CODA7 clock lookups are now defined in the device tree.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
- Remove unused <asm/mach/time.h> inclusion.
- Use predefined constant for CS8900A base address.
- Use DEFINE_RES_MEM() macro for NOR flash resource.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Instead of using init() and exit() hooks from framebuffer driver
to control power of LCD, introduce fixed voltage regulator for
this purpose.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This patch replaces direct handling of peripheral bits with GPIOs by
using basic-mmio-gpio driver. As a result this change eliminate some
low-level code and removes custom io_map() from the board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
To obtain exact pixel clocks, allow the DI clock selectors to influence
the PLLs that they are derived from.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Route the video PLL to the display interface clocks via the di_pre_sel
and di_sel muxes by default.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Allows fror proper refcounting of the parent clocks
when enabling the clock output on CLK1/2 pads.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Richard Zhu <r65037@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lots of changes specific to one of the SoC families. Some that
stick out are:
* mach-qcom gains new features, most importantly SMP support for
the newer chips (Stephen Boyd, Rohit Vaswani)
* mvebu gains support for three new SoCs: Armada 375, 380 and 385
(Thomas Petazzoni and Free-electrons team)
* SMP support for Rockchips (Heiko Stübner)
* Lots of i.MX changes (Shawn Guo)
* Added support for BCM5301x SoC (Hauke Mehrtens)
* Multiplatform support for Marvell Kirkwood and Dove
(Andrew Lunn and Sebastian Hesselbarth doing the final part
of a long journey)
* Unify davinci platforms and remove obsolete ones (Sekhar Nori,
Arnd Bergmann)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=AGpV
-----END PGP SIGNATURE-----
Merge tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC specific changes from Arnd Bergmann:
"Lots of changes specific to one of the SoC families. Some that stick
out are:
- mach-qcom gains new features, most importantly SMP support for the
newer chips (Stephen Boyd, Rohit Vaswani)
- mvebu gains support for three new SoCs: Armada 375, 380 and 385
(Thomas Petazzoni and Free-electrons team)
- SMP support for Rockchips (Heiko Stübner)
- Lots of i.MX changes (Shawn Guo)
- Added support for BCM5301x SoC (Hauke Mehrtens)
- Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn
and Sebastian Hesselbarth doing the final part of a long journey)
- Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd
Bergmann)"
* tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits)
ARM: sunxi: Select HAVE_ARM_ARCH_TIMER
ARM: cache-tauros2: remove ARMv6 code
ARM: mvebu: don't select CONFIG_NEON
ARM: davinci: fix DT booting with default defconfig
ARM: configs: bcm_defconfig: enable bcm590xx regulator support
ARM: davinci: remove tnetv107x support
MAINTAINERS: Update ARM STi maintainers
ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE
ARM: bcm21664: Add board support.
ARM: sunxi: Add the new watchog compatibles to the reboot code
ARM: enable ARM_HAS_SG_CHAIN for multiplatform
ARM: davinci: remove da8xx_omapl_defconfig
ARM: davinci: da8xx: fix multiple watchdog device registration
ARM: davinci: add da8xx specific configs to davinci_all_defconfig
ARM: davinci: enable da8xx build concurrently with older devices
ARM: BCM5301X: workaround suppress fault
ARM: BCM5301X: add early debugging support
ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
ARM: mach-bcm: Remove GENERIC_TIME
ARM: shmobile: APMU: Fix warnings due to improper printk formats
...
These cleanup patches are mainly move stuff around and should all
be harmless. They are mainly split out so that other branches can
be based on top to avoid conflicts.
Notable changes are:
* We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
longer used. (Uwe Kleine-König)
* The Qualcomm MSM platform is split out into legacy mach-msm and
new-style mach-qcom, to allow easier maintainance of the new
hardware support without regressions. (Kumar Gala)
* A rework of some of the Kconfig logic to simplify multiplatform
support (Rob Herring)
* Samsung Exynos gets closer to supporting multiplatform (Sachin
Kamat and others)
* mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
* at91 gains some common clock framework support (Alexandre Belloni,
Jean-Jacques Hiblot and other French people).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=GcBb
-----END PGP SIGNATURE-----
Merge tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC cleanups from Arnd Bergmann:
"These cleanup patches are mainly move stuff around and should all be
harmless. They are mainly split out so that other branches can be
based on top to avoid conflicts.
Notable changes are:
- We finally remove all mach/timex.h, after CLOCK_TICK_RATE is no
longer used (Uwe Kleine-König)
- The Qualcomm MSM platform is split out into legacy mach-msm and
new-style mach-qcom, to allow easier maintainance of the new
hardware support without regressions (Kumar Gala)
- A rework of some of the Kconfig logic to simplify multiplatform
support (Rob Herring)
- Samsung Exynos gets closer to supporting multiplatform (Sachin
Kamat and others)
- mach-bcm3528 gets merged into mach-bcm (Stephen Warren)
- at91 gains some common clock framework support (Alexandre Belloni,
Jean-Jacques Hiblot and other French people)"
* tag 'cleanup-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (89 commits)
ARM: hisi: select HAVE_ARM_SCU only for SMP
ARM: efm32: allow uncompress debug output
ARM: prima2: build reset code standalone
ARM: at91: add PWM clock
ARM: at91: move sam9261 SoC to common clk
ARM: at91: prepare common clk transition for sam9261 SoC
ARM: at91: updated the at91_dt_defconfig with support for the ADS7846
ARM: at91: dt: sam9261: Device Tree support for the at91sam9261ek
ARM: at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs
ARM: at91: dt: Add at91sam9261 dt SoC support
ARM: at91: switch sam9rl to common clock framework
ARM: at91/dt: define main clk frequency of at91sam9rlek
ARM: at91/dt: define at91sam9rl clocks
ARM: at91: prepare common clk transition for sam9rl SoCs
ARM: at91: prepare sam9 dt boards transition to common clk
ARM: at91: dt: sam9rl: Device Tree for the at91sam9rlek
ARM: at91/defconfig: Add the sam9rl to the list of DT-enabled SOCs
ARM: at91: Add at91sam9rl DT SoC support
ARM: at91: prepare at91sam9rl DT transition
ARM: at91/defconfig: refresh at91sam9260_9g20_defconfig
...
Various fbdev fixes and improvements, but nothing big.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=bavN
-----END PGP SIGNATURE-----
Merge tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev changes from Tomi Valkeinen:
"Various fbdev fixes and improvements, but nothing big"
* tag 'fbdev-main-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (38 commits)
fbdev: Make the switch from generic to native driver less alarming
Video: atmel: avoid the id of fix screen info is overwritten
video: imxfb: Add DT default contrast control register property.
video: atmel_lcdfb: ensure the hardware is initialized with the correct mode
fbdev: vesafb: add dev->remove() callback
fbdev: efifb: add dev->remove() callback
video: pxa3xx-gcu: switch to devres functions
video: pxa3xx-gcu: provide an empty .open call
video: pxa3xx-gcu: pass around struct device *
video: pxa3xx-gcu: rename some symbols
sisfb: fix 1280x720 resolution support
video: fbdev: uvesafb: Remove impossible code path in uvesafb_init_info
video: fbdev: uvesafb: Remove redundant NULL check in uvesafb_remove
fbdev: FB_OPENCORES should depend on HAS_DMA
OMAPDSS: convert pixel clock to common videomode style
OMAPDSS: Remove unused get_context_loss_count support
OMAPDSS: use DISPC register to detect context loss
video: da8xx-fb: Use "SIMPLE_DEV_PM_OPS" macro
video: imxfb: Convert to SIMPLE_DEV_PM_OPS
video: imxfb: Resolve mismatch between backlight/contrast
...
Here's the big tty/serial driver update for 3.15-rc1.
Nothing major, a number of serial driver updates and a few tty core
fixes as well.
All have been in linux-next for a while.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iEYEABECAAYFAlM7CWAACgkQMUfUDdst+ylDXACg0vZ+J+5OXbbE3lywVCAebjhB
XzkAn1lz7JRIils7IlckAJ2w/m50b174
=M+8c
-----END PGP SIGNATURE-----
Merge tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver update from Greg KH:
"Here's the big tty/serial driver update for 3.15-rc1.
Nothing major, a number of serial driver updates and a few tty core
fixes as well.
All have been in linux-next for a while"
* tag 'tty-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (71 commits)
tty/serial: omap: empty the RX FIFO at the end of half-duplex TX
tty/serial: omap: fix RX interrupt enable/disable in half-duplex TX
serial: sh-sci: Neaten dev_<level> uses
serial: sh-sci: Replace hardcoded 3 by UART_PM_STATE_OFF
serial: sh-sci: Add more register documentation
serial: sh-sci: Remove useless casts
serial: sh-sci: Replace printk() by pr_*()
serial_core: Avoid NULL pointer dereference in uart_close()
serial_core: Get a reference for port->tty in uart_remove_one_port()
serial: clps711x: Give a chance to perform useful tasks during wait loop
serial_core: Grammar s/ports/port's/
serial_core: Spelling s/contro/control/
serial: efm32: properly namespace location property
serial: max310x: Add missing #include <linux/uaccess.h>
synclink: fix info leak in ioctl
serial: 8250: Clean up the locking for -rt
serial: 8250_pci: change BayTrail default uartclk
serial: 8250_pci: more BayTrail error-free bauds
serial: sh-sci: Add missing call to uart_remove_one_port() in failure path
serial_core: Unregister console in uart_remove_one_port()
...
Merge the request/release callbacks which are in a separate branch for
consumption by the gpio folks.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The function v7_secondary_startup() works just fine in .text section, so
there is no need to have .text.head section annotation at all. Drop it.
Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Even when CONFIG_SUSPEND is enabled, it makes no sense to build
suspend-imx6.o if none of i.MX6 support is built in. Let's build
suspend-imx6.o only when both CONFIG_SUSPEND and CONFIG_SOC_IMX6 are
enabled.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The pm-imx6q.c works for all i.MX6 SoCs, so let's rename it to pm-imx6.c
and have the build controlled by option CONFIG_SOC_IMX6.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Rename function imx6q_ocram_suspend_init() to imx6q_suspend_init() and
call suspend_set_ops() from there. Now we get a centralized function
for suspend initialization.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
With v7_cpu_resume() being moved out of headsmp.S, all the remaining
code in the file is only needed by CONFIG_SMP build. So we can control
the build of headsmp.o with only obj-$(CONFIG_SMP) now.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The suspend-imx6.S is introduced recently for suspend low-level assembly
code. Since function v7_cpu_resume() is only used by suspend support,
it makes sense to move the function into suspend-imx6.S, and control the
build of the file with CONFIG_SUSPEND option.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This is needed so that the IPU framebuffer scanout cannot be
starved by VPU or GPU activity.
Some boards like the SabreLite and SabreSD seem to set this in
the DCD already, but the documented register reset values do not
contain the necessary settings.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
SOC_IMX53 is a device-tree only platform, so we don't need
IMX_HAVE_PLATFORM_IMX2_WDT at all because this symbol only provides some code
to help register imx2-wdt platform devices.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Booting a mx6q system built with multi_v7_defconfig leads to the following
error messages on boot:
[ 0.037758] imx6q_ocram_suspend_init: ocram pool unavailable!
[ 0.037768] imx6_pm_common_init: failed to initialize ocram suspend -19!
This happens because CONFIG_SRAM is not selected by default in
multi_v7_defconfig.
Fix this by selecting CONFIG_SRAM at ARCH_MXC level, so that other SoCs could
use the SRAM driver as well.
As SRAM automatically selects GENERIC_ALLOCATOR, just drop it from the Kconfig
entry.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The fuse map of speed_grading[1:0] defines the max speed
of ARM, see below the definition:
2b'11: 1200000000Hz;
2b'10: 996000000Hz;
2b'01: 852000000Hz; -- i.MX6Q Only, exclusive with 996MHz.
2b'00: 792000000Hz;
Need to remove all illegal setpoints according to fuse
map.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
As clk_pllv3_wait_lock will call usleep_range, and the clk APIs
mutex lock may be held when CPU entering idle, so calling clk
APIs must be avoided in cpu idle thread, this is to avoid reschedule
warning in cpu idle, just access register directly to achieve that.
bad: scheduling from the idle thread!
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.0-rc1+ #657
Backtrace:
[<80012188>] (dump_backtrace) from [<8001246c>] (show_stack+0x18/0x1c)
r6:808c0038 r5:00000000 r4:808e5a1c r3:00000000
[<80012454>] (show_stack) from [<8064b2ec>] (dump_stack+0x84/0x9c)
[<8064b268>] (dump_stack) from [<80055ee0>] (dequeue_task_idle+0x20/0x30)
r5:808bef40 r4:bf7dff40
[<80055ec0>] (dequeue_task_idle) from [<8004f028>] (dequeue_task+0x30/0x50)
r4:bf7dff40 r3:80055ec0
[<8004eff8>] (dequeue_task) from [<800503c0>] (deactivate_task+0x30/0x34)
r4:bf7dff40
[<80050390>] (deactivate_task) from [<8064d8e4>] (__schedule+0x2c8/0x5c0)
[<8064d61c>] (__schedule) from [<8064dc14>] (schedule+0x38/0x88)
r10:80912964 r9:808c1e50 r8:808c0038 r7:808cbf30 r6:80e128ec r5:60000093
r4:80912968
[<8064dbdc>] (schedule) from [<8064dfec>] (schedule_preempt_disabled+0x10/0x14)
[<8064dfdc>] (schedule_preempt_disabled) from [<8064ebc0>] (mutex_lock_nested+0x1c0/0x3c0)
[<8064ea00>] (mutex_lock_nested) from [<804ae71c>] (clk_prepare_lock+0x44/0xe4)
r10:806554cc r9:bf7df1bc r8:808cf4f8 r7:808cf544 r6:bf7df1b8 r5:808c0010
r4:80e69750
[<804ae6d8>] (clk_prepare_lock) from [<804af214>] (clk_get_rate+0x14/0x64)
r6:bf7df1b8 r5:00000002 r4:bf017000 r3:80922ad0
[<804af200>] (clk_get_rate) from [<80025d30>] (imx6sl_set_wait_clk+0x18/0x20)
r5:00000002 r4:00000001
[<80025d18>] (imx6sl_set_wait_clk) from [<80023454>] (imx6sl_enter_wait+0x20/0x48)
[<80023434>] (imx6sl_enter_wait) from [<80477c24>] (cpuidle_enter_state+0x44/0xfc)
r4:3c386e48 r3:80023434
[<80477be0>] (cpuidle_enter_state) from [<80477dd8>] (cpuidle_idle_call+0xfc/0x160)
r8:808cf4f8 r7:00000001 r6:80e69534 r5:00000000 r4:bf7df1b8
[<80477cdc>] (cpuidle_idle_call) from [<8000f61c>] (arch_cpu_idle+0x10/0x50)
r9:808c0000 r8:00000000 r7:80921a89 r6:808c8938 r5:808c899c r4:808c0000
[<8000f60c>] (arch_cpu_idle) from [<8006fa94>] (cpu_startup_entry+0x108/0x160)
[<8006f98c>] (cpu_startup_entry) from [<806452ac>] (rest_init+0xb4/0xdc)
r7:808afae0
[<806451f8>] (rest_init) from [<8086fb58>] (start_kernel+0x328/0x38c)
r6:ffffffff r5:808c8880 r4:808c8a30
[<8086f830>] (start_kernel) from [<80008074>] (0x80008074)
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
On imx6qdl, the ENET RMII and PTP clock can come from either internal
ANATOP/CCM or external clock source through pad GPIO_16. But in case
of the external clock source, bit IOMUXC_GPR1[21] needs to be cleared.
The patch adds the support for systems that use an external clock source
and distinguishes above two cases by checking if the PTP clock specified
in device tree is the one coming from the internal ANATOP/CCM.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Since commit (a94f8ec ARM: imx6q: remove board specific CLKO setup),
a number of clk lookups in imx6q clock driver is no longer needed.
Let's remove them.
The cpu0 lookup is also removed since we are now running imx6 cpufreq
driver and looking up clocks from device tree.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The imx can support timer-based delays, so implement this.
Skips past jiffy calibration.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
IPG, ARM and MMDC's clock should be enabled during kernel boot up,
so we need to maintain their usecount, otherwise, they may be
disabled unexpectedly if their children's clock are turned off, and
caused their parent PLLs also get disabled, which is incorrect.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
i.MX6SL's suspend in ocram function is derived from i.MX6Q,
it can lower the DDR IO power from ~10mA@1.2V to ~1mA@1.2V,
measured on i.MX6SL EVK board, SH5.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
i.MX6DL's suspend in ocram function is derived from i.MX6Q,
it can lower the DDR IO power from ~26mA@1.5V to ~15mA@1.5V,
measured on i.MX6DL SabreSD board, R25.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
When system enter suspend, we can set the DDR IO to
high-Z state to save DDR IOs' power consumption, this
operation can save many power(from ~26mA@1.5V to ~15mA@1.5V,
measured on i.MX6Q SabreSD board, R25) of DDR IOs. To
achieve that, we need to copy the suspend code to ocram
and run the low level hardware related code(set DDR IOs
to high-Z state) in ocram.
If there is no ocram space available, then system will
still do suspend in external DDR, hence no DDR IOs will
be set to high-Z.
The OCRAM usage layout is as below,
ocram suspend region(4K currently):
======================== high address ======================
.
.
.
^
^
^
imx6_suspend code
PM_INFO structure(imx6_cpu_pm_info)
======================== low address =======================
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
As the i.MX pwm driver is devicetree only, remove the platform
support for this device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
There should be no duplicate const specifiers for those static
constant character string arrays defined for clock mux options.
Also, the arrays are only taken as the 5th argument for the
imx_clk_mux() function, which is in the type of 'const char
**parents'. So, let's remove the 2nd const specifier right
after 'char'.
This patch fixes these sparse warnings:
arch/arm/mach-imx/clk-vf610.c:66:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:67:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:68:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:69:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:70:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:71:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:72:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:73:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:74:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:75:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:76:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:77:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:78:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:79:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:80:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:81:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:83:25: warning: duplicate const
arch/arm/mach-imx/clk-vf610.c:84:25: warning: duplicate const
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
There should be no duplicate const specifiers for those static
constant character string arrays defined for clock mux options.
Also, the arrays are only taken as the 5th argument for the
imx_clk_mux() function, which is in the type of 'const char
**parents'. So, let's remove the 2nd const specifier right
after 'char'.
This patch fixes these sparse warnings:
arch/arm/mach-imx/clk-imx6sl.c:21:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:22:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:23:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:24:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:25:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:26:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:27:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:28:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:29:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:30:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:31:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:32:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:33:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:34:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:35:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:36:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:37:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:38:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:39:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:40:25: warning: duplicate const
arch/arm/mach-imx/clk-imx6sl.c:41:25: warning: duplicate const
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Move ARCH_HAS_CPUFREQ, ARCH_HAS_OPP and PM_OPP on ARCH_MXC so that
the user can enable the cpufreq support for iMX6Q and/or iMX6SL.
Signed-off-by: John Tobias <john.tobias.ph@gmail.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
shawn.guo: While at it, we drop 'select PINCTRL' from SOC_IMX35, since
it's been covered by ARCH_MXC.
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: devicetree@vger.kernel.org
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Eric Bénard <eric@eukrea.com>
Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Add cpuidle support for i.MX6SL, currently only support
two cpuidle levels(ARM wfi and WAIT mode), and add software
workaround for WAIT mode errata as below:
ERR005311 CCM: After exit from WAIT mode, unwanted interrupt(s) taken
during WAIT mode entry process could cause cache memory
corruption.
Software workaround:
To prevent this issue from occurring, software should ensure that
the ARM to IPG clock ratio is less than 12:5 (that is < 2.4x), before
entering WAIT mode.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
The reset value of AHB divider is 3, so current AHB rate
is 99MHz which is not correct for kernel, need to ensure
AHB rate is 132MHz in clk driver, as ipg is sourcing from
AHB, and it should be 66MHz by default.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Bit 17 of register CCM_CGPR is called INT_MEM_CLK_LPM as per the mx6
reference manual, so use this name instead.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
of individual platforms as they are redundant.
- Make SMP, CACHE_L2X0 and GPIO config options user visible on
multi-platform builds as most platforms enable these options and all
platforms can run with them enabled.
- Make multi-platform v6 default to more optimal v6k rather than v6
- Remove the last bit of mach-virt and convert it to just a kconfig
option.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQEcBAABAgAGBQJTBT1nAAoJEMhvYp4jgsXikI0IAIv2GmBCgbg0XhHZBSheSNOh
Th1bv4KeEci/3uezwVTAA3AtJIvDNMAQjRYjNSyOnCCC7s5czex1w/Mk/6IzgX8C
eCauM5kiOV3ZKPMbPI6gxg0bmFe+YzWREbm7fpAqxpc3IXwzYlShnq/kKISq25Qj
mRZtv97AB2xqAy9zTyy18y+c+F/1mAgd+NeiDbjBimHbTK4urjiD7PpcWvmbYZld
H9Qw4d9JwVTRpRHw9PRR9glnvFYiFpp+s9ehSjcyYi8wjZKO1+67c56fS+ScsoV7
qM4J2qtS2kpzvyFvOI7wY6E2M5Es7zOeuJAmh0jEkbDtRa0a4YFYL0DAp5k9Xiw=
=NEez
-----END PGP SIGNATURE-----
Merge tag 'kconfig-cleanup-for-3.15' into imx/soc
- Remove common kconfig options required by multi-platform builds out
of individual platforms as they are redundant.
- Make SMP, CACHE_L2X0 and GPIO config options user visible on
multi-platform builds as most platforms enable these options and all
platforms can run with them enabled.
- Make multi-platform v6 default to more optimal v6k rather than v6
- Remove the last bit of mach-virt and convert it to just a kconfig
option.
Conflicts:
arch/arm/mach-omap2/Kconfig
Use the proper functions. There is no need to fiddle with irq_desc.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>C
Acked-by: Tony Lindgren <tony@atomide.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: arm <linux-arm-kernel@lists.infradead.org>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Link: http://lkml.kernel.org/r/20140223212737.099151500@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MULTI_V6 should default to V6K as it is more optimal than V6. Any
platform which is not V6K should select CPU_V6 which will enable the
less optimal code paths.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Anton Vorontsov <anton@enomsg.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Jamie Iles <jamie@jamieiles.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Many V6 and V7 platforms have an L2x0 cache, so make
CONFIG_MIGHT_HAVE_CACHE_L2X0 visible for V6 and V7 multi-platform
builds.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
All V7 platforms can run SMP kernels, so make CONFIG_SMP visible for V7
multi-platform builds.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Multi-platform requires various kconfig options to be selected, so
platforms don't need to select them individually.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
When building a kernel image with only CONFIG_CPU_IDLE but no CONFIG_PM,
we will get the following link error.
LD init/built-in.o
arch/arm/mach-imx/built-in.o: In function `imx6q_enter_wait':
platform-spi_imx.c:(.text+0x25c0): undefined reference to `imx6q_set_lpm'
platform-spi_imx.c:(.text+0x25d4): undefined reference to `imx6q_set_lpm'
arch/arm/mach-imx/built-in.o: In function `imx6q_cpuidle_init':
platform-spi_imx.c:(.init.text+0x75d4): undefined reference to `imx6q_set_chicken_bit'
make[1]: *** [vmlinux] Error 1
Since pm-imx6q.c has been a collection of library functions that access
CCM low-power registers used by not only suspend but also cpuidle and
other drivers, let's build pm-imx6q.c independently of CONFIG_PM to fix
above error.
Reported-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: stable@vger.kernel.org
Acked-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch replaces custom lcd_power() callback with
regulator API over LCD class.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
